2 * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
4 * Copyright (c) 2008-2009 USI Co., Ltd.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
41 #ifndef _PM8001_SAS_H_
42 #define _PM8001_SAS_H_
44 #include <linux/kernel.h>
45 #include <linux/module.h>
46 #include <linux/spinlock.h>
47 #include <linux/delay.h>
48 #include <linux/types.h>
49 #include <linux/ctype.h>
50 #include <linux/dma-mapping.h>
51 #include <linux/pci.h>
52 #include <linux/interrupt.h>
53 #include <linux/workqueue.h>
54 #include <scsi/libsas.h>
55 #include <scsi/scsi_tcq.h>
56 #include <scsi/sas_ata.h>
57 #include <linux/atomic.h>
58 #include "pm8001_defs.h"
60 #define DRV_NAME "pm8001"
61 #define DRV_VERSION "0.1.36"
62 #define PM8001_FAIL_LOGGING 0x01 /* Error message logging */
63 #define PM8001_INIT_LOGGING 0x02 /* driver init logging */
64 #define PM8001_DISC_LOGGING 0x04 /* discovery layer logging */
65 #define PM8001_IO_LOGGING 0x08 /* I/O path logging */
66 #define PM8001_EH_LOGGING 0x10 /* libsas EH function logging*/
67 #define PM8001_IOCTL_LOGGING 0x20 /* IOCTL message logging */
68 #define PM8001_MSG_LOGGING 0x40 /* misc message logging */
69 #define pm8001_printk(format, arg...) printk(KERN_INFO "%s %d:" format,\
70 __func__, __LINE__, ## arg)
71 #define PM8001_CHECK_LOGGING(HBA, LEVEL, CMD) \
73 if (unlikely(HBA->logging_level & LEVEL)) \
79 #define PM8001_EH_DBG(HBA, CMD) \
80 PM8001_CHECK_LOGGING(HBA, PM8001_EH_LOGGING, CMD)
82 #define PM8001_INIT_DBG(HBA, CMD) \
83 PM8001_CHECK_LOGGING(HBA, PM8001_INIT_LOGGING, CMD)
85 #define PM8001_DISC_DBG(HBA, CMD) \
86 PM8001_CHECK_LOGGING(HBA, PM8001_DISC_LOGGING, CMD)
88 #define PM8001_IO_DBG(HBA, CMD) \
89 PM8001_CHECK_LOGGING(HBA, PM8001_IO_LOGGING, CMD)
91 #define PM8001_FAIL_DBG(HBA, CMD) \
92 PM8001_CHECK_LOGGING(HBA, PM8001_FAIL_LOGGING, CMD)
94 #define PM8001_IOCTL_DBG(HBA, CMD) \
95 PM8001_CHECK_LOGGING(HBA, PM8001_IOCTL_LOGGING, CMD)
97 #define PM8001_MSG_DBG(HBA, CMD) \
98 PM8001_CHECK_LOGGING(HBA, PM8001_MSG_LOGGING, CMD)
101 #define PM8001_USE_TASKLET
102 #define PM8001_USE_MSIX
103 #define PM8001_READ_VPD
106 #define DEV_IS_EXPANDER(type) ((type == EDGE_DEV) || (type == FANOUT_DEV))
108 #define PM8001_NAME_LENGTH 32/* generic length of strings */
109 extern struct list_head hba_list
;
110 extern const struct pm8001_dispatch pm8001_8001_dispatch
;
112 struct pm8001_hba_info
;
113 struct pm8001_ccb_info
;
114 struct pm8001_device
;
115 /* define task management IU */
116 struct pm8001_tmf_task
{
118 u32 tag_of_task_to_be_managed
;
120 struct pm8001_ioctl_payload
{
131 struct pm8001_dispatch
{
133 int (*chip_init
)(struct pm8001_hba_info
*pm8001_ha
);
134 int (*chip_soft_rst
)(struct pm8001_hba_info
*pm8001_ha
, u32 signature
);
135 void (*chip_rst
)(struct pm8001_hba_info
*pm8001_ha
);
136 int (*chip_ioremap
)(struct pm8001_hba_info
*pm8001_ha
);
137 void (*chip_iounmap
)(struct pm8001_hba_info
*pm8001_ha
);
138 irqreturn_t (*isr
)(struct pm8001_hba_info
*pm8001_ha
);
139 u32 (*is_our_interupt
)(struct pm8001_hba_info
*pm8001_ha
);
140 int (*isr_process_oq
)(struct pm8001_hba_info
*pm8001_ha
);
141 void (*interrupt_enable
)(struct pm8001_hba_info
*pm8001_ha
);
142 void (*interrupt_disable
)(struct pm8001_hba_info
*pm8001_ha
);
143 void (*make_prd
)(struct scatterlist
*scatter
, int nr
, void *prd
);
144 int (*smp_req
)(struct pm8001_hba_info
*pm8001_ha
,
145 struct pm8001_ccb_info
*ccb
);
146 int (*ssp_io_req
)(struct pm8001_hba_info
*pm8001_ha
,
147 struct pm8001_ccb_info
*ccb
);
148 int (*sata_req
)(struct pm8001_hba_info
*pm8001_ha
,
149 struct pm8001_ccb_info
*ccb
);
150 int (*phy_start_req
)(struct pm8001_hba_info
*pm8001_ha
, u8 phy_id
);
151 int (*phy_stop_req
)(struct pm8001_hba_info
*pm8001_ha
, u8 phy_id
);
152 int (*reg_dev_req
)(struct pm8001_hba_info
*pm8001_ha
,
153 struct pm8001_device
*pm8001_dev
, u32 flag
);
154 int (*dereg_dev_req
)(struct pm8001_hba_info
*pm8001_ha
, u32 device_id
);
155 int (*phy_ctl_req
)(struct pm8001_hba_info
*pm8001_ha
,
156 u32 phy_id
, u32 phy_op
);
157 int (*task_abort
)(struct pm8001_hba_info
*pm8001_ha
,
158 struct pm8001_device
*pm8001_dev
, u8 flag
, u32 task_tag
,
160 int (*ssp_tm_req
)(struct pm8001_hba_info
*pm8001_ha
,
161 struct pm8001_ccb_info
*ccb
, struct pm8001_tmf_task
*tmf
);
162 int (*get_nvmd_req
)(struct pm8001_hba_info
*pm8001_ha
, void *payload
);
163 int (*set_nvmd_req
)(struct pm8001_hba_info
*pm8001_ha
, void *payload
);
164 int (*fw_flash_update_req
)(struct pm8001_hba_info
*pm8001_ha
,
166 int (*set_dev_state_req
)(struct pm8001_hba_info
*pm8001_ha
,
167 struct pm8001_device
*pm8001_dev
, u32 state
);
168 int (*sas_diag_start_end_req
)(struct pm8001_hba_info
*pm8001_ha
,
170 int (*sas_diag_execute_req
)(struct pm8001_hba_info
*pm8001_ha
,
172 int (*sas_re_init_req
)(struct pm8001_hba_info
*pm8001_ha
);
175 struct pm8001_chip_info
{
177 const struct pm8001_dispatch
*dispatch
;
179 #define PM8001_CHIP_DISP (pm8001_ha->chip->dispatch)
182 struct asd_sas_port sas_port
;
186 struct list_head list
;
190 struct pm8001_hba_info
*pm8001_ha
;
191 struct pm8001_port
*port
;
192 struct asd_sas_phy sas_phy
;
193 struct sas_identify identify
;
194 struct scsi_device
*sdev
;
197 struct completion
*enable_completion
;
202 enum sas_linkrate minimum_linkrate
;
203 enum sas_linkrate maximum_linkrate
;
206 struct pm8001_device
{
207 enum sas_dev_type dev_type
;
208 struct domain_device
*sas_device
;
211 struct completion
*dcompletion
;
212 struct completion
*setds_completion
;
217 struct pm8001_prd_imt
{
223 __le64 addr
; /* 64-bit buffer address */
224 struct pm8001_prd_imt im_len
; /* 64-bit length */
225 } __attribute__ ((packed
));
227 * CCB(Command Control Block)
229 struct pm8001_ccb_info
{
230 struct list_head entry
;
231 struct sas_task
*task
;
234 dma_addr_t ccb_dma_handle
;
235 struct pm8001_device
*device
;
236 struct pm8001_prd buf_prd
[PM8001_MAX_DMA_SG
];
237 struct fw_control_ex
*fw_control_context
;
242 dma_addr_t phys_addr
;
252 /* The number of element in the mpiMemory array */
254 /* The array of structures that define memroy regions*/
255 struct mpi_mem region
[USI_MAX_MEMCNT
];
258 struct main_cfg_table
{
266 u32 inbound_queue_offset
;
267 u32 outbound_queue_offset
;
268 u32 inbound_q_nppd_hppd
;
269 u32 outbound_hw_event_pid0_3
;
270 u32 outbound_hw_event_pid4_7
;
271 u32 outbound_ncq_event_pid0_3
;
272 u32 outbound_ncq_event_pid4_7
;
273 u32 outbound_tgt_ITNexus_event_pid0_3
;
274 u32 outbound_tgt_ITNexus_event_pid4_7
;
275 u32 outbound_tgt_ssp_event_pid0_3
;
276 u32 outbound_tgt_ssp_event_pid4_7
;
277 u32 outbound_tgt_smp_event_pid0_3
;
278 u32 outbound_tgt_smp_event_pid4_7
;
279 u32 upper_event_log_addr
;
280 u32 lower_event_log_addr
;
282 u32 event_log_option
;
283 u32 upper_iop_event_log_addr
;
284 u32 lower_iop_event_log_addr
;
285 u32 iop_event_log_size
;
286 u32 iop_event_log_option
;
287 u32 fatal_err_interrupt
;
288 u32 fatal_err_dump_offset0
;
289 u32 fatal_err_dump_length0
;
290 u32 fatal_err_dump_offset1
;
291 u32 fatal_err_dump_length1
;
293 u32 anolog_setup_table_offset
;
295 struct general_status_table
{
296 u32 gst_len_mpistate
;
297 u32 iq_freeze_state0
;
298 u32 iq_freeze_state1
;
306 u32 recover_err_info
[8];
308 struct inbound_queue_table
{
309 u32 element_pri_size_cnt
;
312 u32 ci_upper_base_addr
;
313 u32 ci_lower_base_addr
;
320 __le32 consumer_index
;
323 struct outbound_queue_table
{
324 u32 element_size_cnt
;
328 u32 pi_upper_base_addr
;
329 u32 pi_lower_base_addr
;
334 u32 interrup_vec_cnt_delay
;
335 u32 dinterrup_to_pci_offset
;
336 __le32 producer_index
;
339 struct pm8001_hba_memspace
{
340 void __iomem
*memvirtaddr
;
344 struct pm8001_hba_info
{
345 char name
[PM8001_NAME_LENGTH
];
346 struct list_head list
;
348 spinlock_t lock
;/* host-wide lock */
349 struct pci_dev
*pdev
;/* our device */
351 struct pm8001_hba_memspace io_mem
[6];
352 struct mpi_mem_req memoryMap
;
353 void __iomem
*msg_unit_tbl_addr
;/*Message Unit Table Addr*/
354 void __iomem
*main_cfg_tbl_addr
;/*Main Config Table Addr*/
355 void __iomem
*general_stat_tbl_addr
;/*General Status Table Addr*/
356 void __iomem
*inbnd_q_tbl_addr
;/*Inbound Queue Config Table Addr*/
357 void __iomem
*outbnd_q_tbl_addr
;/*Outbound Queue Config Table Addr*/
358 struct main_cfg_table main_cfg_tbl
;
359 struct general_status_table gs_tbl
;
360 struct inbound_queue_table inbnd_q_tbl
[PM8001_MAX_INB_NUM
];
361 struct outbound_queue_table outbnd_q_tbl
[PM8001_MAX_OUTB_NUM
];
362 u8 sas_addr
[SAS_ADDR_SIZE
];
363 struct sas_ha_struct
*sas
;/* SCSI/SAS glue */
364 struct Scsi_Host
*shost
;
366 const struct pm8001_chip_info
*chip
;
367 struct completion
*nvmd_completion
;
370 struct pm8001_phy phy
[PM8001_MAX_PHYS
];
371 struct pm8001_port port
[PM8001_MAX_PHYS
];
374 struct pm8001_device
*devices
;
375 struct pm8001_ccb_info
*ccb_info
;
376 #ifdef PM8001_USE_MSIX
377 struct msix_entry msix_entries
[16];/*for msi-x interrupt*/
378 int number_of_intr
;/*will be used in remove()*/
380 #ifdef PM8001_USE_TASKLET
381 struct tasklet_struct tasklet
;
385 const struct firmware
*fw_image
;
389 struct work_struct work
;
390 struct pm8001_hba_info
*pm8001_ha
;
395 struct pm8001_fw_image_header
{
404 __be32 startup_entry
;
405 } __attribute__((packed
, aligned(4)));
409 * FW Flash Update status values
411 #define FLASH_UPDATE_COMPLETE_PENDING_REBOOT 0x00
412 #define FLASH_UPDATE_IN_PROGRESS 0x01
413 #define FLASH_UPDATE_HDR_ERR 0x02
414 #define FLASH_UPDATE_OFFSET_ERR 0x03
415 #define FLASH_UPDATE_CRC_ERR 0x04
416 #define FLASH_UPDATE_LENGTH_ERR 0x05
417 #define FLASH_UPDATE_HW_ERR 0x06
418 #define FLASH_UPDATE_DNLD_NOT_SUPPORTED 0x10
419 #define FLASH_UPDATE_DISABLED 0x11
422 * brief param structure for firmware flash update.
424 struct fw_flash_updata_info
{
425 u32 cur_image_offset
;
428 struct pm8001_prd sgl
;
431 struct fw_control_info
{
432 u32 retcode
;/*ret code (status)*/
433 u32 phase
;/*ret code phase*/
434 u32 phaseCmplt
;/*percent complete for the current
436 u32 version
;/*Hex encoded firmware version number*/
437 u32 offset
;/*Used for downloading firmware */
438 u32 len
; /*len of buffer*/
439 u32 size
;/* Used in OS VPD and Trace get size
441 u32 reserved
;/* padding required for 64 bit
443 u8 buffer
[1];/* Start of buffer */
445 struct fw_control_ex
{
446 struct fw_control_info
*fw_control
;
447 void *buffer
;/* keep buffer pointer to be
448 freed when the response comes*/
449 void *virtAddr
;/* keep virtual address of the data */
450 void *usrAddr
;/* keep virtual address of the
452 dma_addr_t phys_addr
;
453 u32 len
; /* len of buffer */
454 void *payload
; /* pointer to IOCTL Payload */
455 u8 inProgress
;/*if 1 - the IOCTL request is in
462 /* pm8001 workqueue */
463 extern struct workqueue_struct
*pm8001_wq
;
465 /******************** function prototype *********************/
466 int pm8001_tag_alloc(struct pm8001_hba_info
*pm8001_ha
, u32
*tag_out
);
467 void pm8001_tag_init(struct pm8001_hba_info
*pm8001_ha
);
468 u32
pm8001_get_ncq_tag(struct sas_task
*task
, u32
*tag
);
469 void pm8001_ccb_free(struct pm8001_hba_info
*pm8001_ha
, u32 ccb_idx
);
470 void pm8001_ccb_task_free(struct pm8001_hba_info
*pm8001_ha
,
471 struct sas_task
*task
, struct pm8001_ccb_info
*ccb
, u32 ccb_idx
);
472 int pm8001_phy_control(struct asd_sas_phy
*sas_phy
, enum phy_func func
,
474 void pm8001_scan_start(struct Scsi_Host
*shost
);
475 int pm8001_scan_finished(struct Scsi_Host
*shost
, unsigned long time
);
476 int pm8001_queue_command(struct sas_task
*task
, const int num
,
478 int pm8001_abort_task(struct sas_task
*task
);
479 int pm8001_abort_task_set(struct domain_device
*dev
, u8
*lun
);
480 int pm8001_clear_aca(struct domain_device
*dev
, u8
*lun
);
481 int pm8001_clear_task_set(struct domain_device
*dev
, u8
*lun
);
482 int pm8001_dev_found(struct domain_device
*dev
);
483 void pm8001_dev_gone(struct domain_device
*dev
);
484 int pm8001_lu_reset(struct domain_device
*dev
, u8
*lun
);
485 int pm8001_I_T_nexus_reset(struct domain_device
*dev
);
486 int pm8001_query_task(struct sas_task
*task
);
487 int pm8001_mem_alloc(struct pci_dev
*pdev
, void **virt_addr
,
488 dma_addr_t
*pphys_addr
, u32
*pphys_addr_hi
, u32
*pphys_addr_lo
,
489 u32 mem_size
, u32 align
);
493 extern struct device_attribute
*pm8001_host_attrs
[];