Linux 3.4.102
[linux/fpc-iii.git] / drivers / md / dm-mpath.c
blobd5fc3ec3639ebd39bb867cc696fddba8429ed12d
1 /*
2 * Copyright (C) 2003 Sistina Software Limited.
3 * Copyright (C) 2004-2005 Red Hat, Inc. All rights reserved.
5 * This file is released under the GPL.
6 */
8 #include <linux/device-mapper.h>
10 #include "dm-path-selector.h"
11 #include "dm-uevent.h"
13 #include <linux/ctype.h>
14 #include <linux/init.h>
15 #include <linux/mempool.h>
16 #include <linux/module.h>
17 #include <linux/pagemap.h>
18 #include <linux/slab.h>
19 #include <linux/time.h>
20 #include <linux/workqueue.h>
21 #include <scsi/scsi_dh.h>
22 #include <linux/atomic.h>
24 #define DM_MSG_PREFIX "multipath"
25 #define DM_PG_INIT_DELAY_MSECS 2000
26 #define DM_PG_INIT_DELAY_DEFAULT ((unsigned) -1)
28 /* Path properties */
29 struct pgpath {
30 struct list_head list;
32 struct priority_group *pg; /* Owning PG */
33 unsigned is_active; /* Path status */
34 unsigned fail_count; /* Cumulative failure count */
36 struct dm_path path;
37 struct delayed_work activate_path;
40 #define path_to_pgpath(__pgp) container_of((__pgp), struct pgpath, path)
43 * Paths are grouped into Priority Groups and numbered from 1 upwards.
44 * Each has a path selector which controls which path gets used.
46 struct priority_group {
47 struct list_head list;
49 struct multipath *m; /* Owning multipath instance */
50 struct path_selector ps;
52 unsigned pg_num; /* Reference number */
53 unsigned bypassed; /* Temporarily bypass this PG? */
55 unsigned nr_pgpaths; /* Number of paths in PG */
56 struct list_head pgpaths;
59 /* Multipath context */
60 struct multipath {
61 struct list_head list;
62 struct dm_target *ti;
64 spinlock_t lock;
66 const char *hw_handler_name;
67 char *hw_handler_params;
69 unsigned nr_priority_groups;
70 struct list_head priority_groups;
72 wait_queue_head_t pg_init_wait; /* Wait for pg_init completion */
74 unsigned pg_init_required; /* pg_init needs calling? */
75 unsigned pg_init_in_progress; /* Only one pg_init allowed at once */
76 unsigned pg_init_delay_retry; /* Delay pg_init retry? */
78 unsigned nr_valid_paths; /* Total number of usable paths */
79 struct pgpath *current_pgpath;
80 struct priority_group *current_pg;
81 struct priority_group *next_pg; /* Switch to this PG if set */
82 unsigned repeat_count; /* I/Os left before calling PS again */
84 unsigned queue_io; /* Must we queue all I/O? */
85 unsigned queue_if_no_path; /* Queue I/O if last path fails? */
86 unsigned saved_queue_if_no_path;/* Saved state during suspension */
87 unsigned pg_init_disabled:1; /* pg_init is not currently allowed */
88 unsigned pg_init_retries; /* Number of times to retry pg_init */
89 unsigned pg_init_count; /* Number of times pg_init called */
90 unsigned pg_init_delay_msecs; /* Number of msecs before pg_init retry */
92 struct work_struct process_queued_ios;
93 struct list_head queued_ios;
94 unsigned queue_size;
96 struct work_struct trigger_event;
99 * We must use a mempool of dm_mpath_io structs so that we
100 * can resubmit bios on error.
102 mempool_t *mpio_pool;
104 struct mutex work_mutex;
108 * Context information attached to each bio we process.
110 struct dm_mpath_io {
111 struct pgpath *pgpath;
112 size_t nr_bytes;
115 typedef int (*action_fn) (struct pgpath *pgpath);
117 #define MIN_IOS 256 /* Mempool size */
119 static struct kmem_cache *_mpio_cache;
121 static struct workqueue_struct *kmultipathd, *kmpath_handlerd;
122 static void process_queued_ios(struct work_struct *work);
123 static void trigger_event(struct work_struct *work);
124 static void activate_path(struct work_struct *work);
127 /*-----------------------------------------------
128 * Allocation routines
129 *-----------------------------------------------*/
131 static struct pgpath *alloc_pgpath(void)
133 struct pgpath *pgpath = kzalloc(sizeof(*pgpath), GFP_KERNEL);
135 if (pgpath) {
136 pgpath->is_active = 1;
137 INIT_DELAYED_WORK(&pgpath->activate_path, activate_path);
140 return pgpath;
143 static void free_pgpath(struct pgpath *pgpath)
145 kfree(pgpath);
148 static struct priority_group *alloc_priority_group(void)
150 struct priority_group *pg;
152 pg = kzalloc(sizeof(*pg), GFP_KERNEL);
154 if (pg)
155 INIT_LIST_HEAD(&pg->pgpaths);
157 return pg;
160 static void free_pgpaths(struct list_head *pgpaths, struct dm_target *ti)
162 struct pgpath *pgpath, *tmp;
163 struct multipath *m = ti->private;
165 list_for_each_entry_safe(pgpath, tmp, pgpaths, list) {
166 list_del(&pgpath->list);
167 if (m->hw_handler_name)
168 scsi_dh_detach(bdev_get_queue(pgpath->path.dev->bdev));
169 dm_put_device(ti, pgpath->path.dev);
170 free_pgpath(pgpath);
174 static void free_priority_group(struct priority_group *pg,
175 struct dm_target *ti)
177 struct path_selector *ps = &pg->ps;
179 if (ps->type) {
180 ps->type->destroy(ps);
181 dm_put_path_selector(ps->type);
184 free_pgpaths(&pg->pgpaths, ti);
185 kfree(pg);
188 static struct multipath *alloc_multipath(struct dm_target *ti)
190 struct multipath *m;
192 m = kzalloc(sizeof(*m), GFP_KERNEL);
193 if (m) {
194 INIT_LIST_HEAD(&m->priority_groups);
195 INIT_LIST_HEAD(&m->queued_ios);
196 spin_lock_init(&m->lock);
197 m->queue_io = 1;
198 m->pg_init_delay_msecs = DM_PG_INIT_DELAY_DEFAULT;
199 INIT_WORK(&m->process_queued_ios, process_queued_ios);
200 INIT_WORK(&m->trigger_event, trigger_event);
201 init_waitqueue_head(&m->pg_init_wait);
202 mutex_init(&m->work_mutex);
203 m->mpio_pool = mempool_create_slab_pool(MIN_IOS, _mpio_cache);
204 if (!m->mpio_pool) {
205 kfree(m);
206 return NULL;
208 m->ti = ti;
209 ti->private = m;
212 return m;
215 static void free_multipath(struct multipath *m)
217 struct priority_group *pg, *tmp;
219 list_for_each_entry_safe(pg, tmp, &m->priority_groups, list) {
220 list_del(&pg->list);
221 free_priority_group(pg, m->ti);
224 kfree(m->hw_handler_name);
225 kfree(m->hw_handler_params);
226 mempool_destroy(m->mpio_pool);
227 kfree(m);
230 static int set_mapinfo(struct multipath *m, union map_info *info)
232 struct dm_mpath_io *mpio;
234 mpio = mempool_alloc(m->mpio_pool, GFP_ATOMIC);
235 if (!mpio)
236 return -ENOMEM;
238 memset(mpio, 0, sizeof(*mpio));
239 info->ptr = mpio;
241 return 0;
244 static void clear_mapinfo(struct multipath *m, union map_info *info)
246 struct dm_mpath_io *mpio = info->ptr;
248 info->ptr = NULL;
249 mempool_free(mpio, m->mpio_pool);
252 /*-----------------------------------------------
253 * Path selection
254 *-----------------------------------------------*/
256 static void __pg_init_all_paths(struct multipath *m)
258 struct pgpath *pgpath;
259 unsigned long pg_init_delay = 0;
261 m->pg_init_count++;
262 m->pg_init_required = 0;
263 if (m->pg_init_delay_retry)
264 pg_init_delay = msecs_to_jiffies(m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT ?
265 m->pg_init_delay_msecs : DM_PG_INIT_DELAY_MSECS);
266 list_for_each_entry(pgpath, &m->current_pg->pgpaths, list) {
267 /* Skip failed paths */
268 if (!pgpath->is_active)
269 continue;
270 if (queue_delayed_work(kmpath_handlerd, &pgpath->activate_path,
271 pg_init_delay))
272 m->pg_init_in_progress++;
276 static void __switch_pg(struct multipath *m, struct pgpath *pgpath)
278 m->current_pg = pgpath->pg;
280 /* Must we initialise the PG first, and queue I/O till it's ready? */
281 if (m->hw_handler_name) {
282 m->pg_init_required = 1;
283 m->queue_io = 1;
284 } else {
285 m->pg_init_required = 0;
286 m->queue_io = 0;
289 m->pg_init_count = 0;
292 static int __choose_path_in_pg(struct multipath *m, struct priority_group *pg,
293 size_t nr_bytes)
295 struct dm_path *path;
297 path = pg->ps.type->select_path(&pg->ps, &m->repeat_count, nr_bytes);
298 if (!path)
299 return -ENXIO;
301 m->current_pgpath = path_to_pgpath(path);
303 if (m->current_pg != pg)
304 __switch_pg(m, m->current_pgpath);
306 return 0;
309 static void __choose_pgpath(struct multipath *m, size_t nr_bytes)
311 struct priority_group *pg;
312 unsigned bypassed = 1;
314 if (!m->nr_valid_paths)
315 goto failed;
317 /* Were we instructed to switch PG? */
318 if (m->next_pg) {
319 pg = m->next_pg;
320 m->next_pg = NULL;
321 if (!__choose_path_in_pg(m, pg, nr_bytes))
322 return;
325 /* Don't change PG until it has no remaining paths */
326 if (m->current_pg && !__choose_path_in_pg(m, m->current_pg, nr_bytes))
327 return;
330 * Loop through priority groups until we find a valid path.
331 * First time we skip PGs marked 'bypassed'.
332 * Second time we only try the ones we skipped.
334 do {
335 list_for_each_entry(pg, &m->priority_groups, list) {
336 if (pg->bypassed == bypassed)
337 continue;
338 if (!__choose_path_in_pg(m, pg, nr_bytes))
339 return;
341 } while (bypassed--);
343 failed:
344 m->current_pgpath = NULL;
345 m->current_pg = NULL;
349 * Check whether bios must be queued in the device-mapper core rather
350 * than here in the target.
352 * m->lock must be held on entry.
354 * If m->queue_if_no_path and m->saved_queue_if_no_path hold the
355 * same value then we are not between multipath_presuspend()
356 * and multipath_resume() calls and we have no need to check
357 * for the DMF_NOFLUSH_SUSPENDING flag.
359 static int __must_push_back(struct multipath *m)
361 return (m->queue_if_no_path != m->saved_queue_if_no_path &&
362 dm_noflush_suspending(m->ti));
365 static int map_io(struct multipath *m, struct request *clone,
366 union map_info *map_context, unsigned was_queued)
368 int r = DM_MAPIO_REMAPPED;
369 size_t nr_bytes = blk_rq_bytes(clone);
370 unsigned long flags;
371 struct pgpath *pgpath;
372 struct block_device *bdev;
373 struct dm_mpath_io *mpio = map_context->ptr;
375 spin_lock_irqsave(&m->lock, flags);
377 /* Do we need to select a new pgpath? */
378 if (!m->current_pgpath ||
379 (!m->queue_io && (m->repeat_count && --m->repeat_count == 0)))
380 __choose_pgpath(m, nr_bytes);
382 pgpath = m->current_pgpath;
384 if (was_queued)
385 m->queue_size--;
387 if ((pgpath && m->queue_io) ||
388 (!pgpath && m->queue_if_no_path)) {
389 /* Queue for the daemon to resubmit */
390 list_add_tail(&clone->queuelist, &m->queued_ios);
391 m->queue_size++;
392 if ((m->pg_init_required && !m->pg_init_in_progress) ||
393 !m->queue_io)
394 queue_work(kmultipathd, &m->process_queued_ios);
395 pgpath = NULL;
396 r = DM_MAPIO_SUBMITTED;
397 } else if (pgpath) {
398 bdev = pgpath->path.dev->bdev;
399 clone->q = bdev_get_queue(bdev);
400 clone->rq_disk = bdev->bd_disk;
401 } else if (__must_push_back(m))
402 r = DM_MAPIO_REQUEUE;
403 else
404 r = -EIO; /* Failed */
406 mpio->pgpath = pgpath;
407 mpio->nr_bytes = nr_bytes;
409 if (r == DM_MAPIO_REMAPPED && pgpath->pg->ps.type->start_io)
410 pgpath->pg->ps.type->start_io(&pgpath->pg->ps, &pgpath->path,
411 nr_bytes);
413 spin_unlock_irqrestore(&m->lock, flags);
415 return r;
419 * If we run out of usable paths, should we queue I/O or error it?
421 static int queue_if_no_path(struct multipath *m, unsigned queue_if_no_path,
422 unsigned save_old_value)
424 unsigned long flags;
426 spin_lock_irqsave(&m->lock, flags);
428 if (save_old_value)
429 m->saved_queue_if_no_path = m->queue_if_no_path;
430 else
431 m->saved_queue_if_no_path = queue_if_no_path;
432 m->queue_if_no_path = queue_if_no_path;
433 if (!m->queue_if_no_path && m->queue_size)
434 queue_work(kmultipathd, &m->process_queued_ios);
436 spin_unlock_irqrestore(&m->lock, flags);
438 return 0;
441 /*-----------------------------------------------------------------
442 * The multipath daemon is responsible for resubmitting queued ios.
443 *---------------------------------------------------------------*/
445 static void dispatch_queued_ios(struct multipath *m)
447 int r;
448 unsigned long flags;
449 union map_info *info;
450 struct request *clone, *n;
451 LIST_HEAD(cl);
453 spin_lock_irqsave(&m->lock, flags);
454 list_splice_init(&m->queued_ios, &cl);
455 spin_unlock_irqrestore(&m->lock, flags);
457 list_for_each_entry_safe(clone, n, &cl, queuelist) {
458 list_del_init(&clone->queuelist);
460 info = dm_get_rq_mapinfo(clone);
462 r = map_io(m, clone, info, 1);
463 if (r < 0) {
464 clear_mapinfo(m, info);
465 dm_kill_unmapped_request(clone, r);
466 } else if (r == DM_MAPIO_REMAPPED)
467 dm_dispatch_request(clone);
468 else if (r == DM_MAPIO_REQUEUE) {
469 clear_mapinfo(m, info);
470 dm_requeue_unmapped_request(clone);
475 static void process_queued_ios(struct work_struct *work)
477 struct multipath *m =
478 container_of(work, struct multipath, process_queued_ios);
479 struct pgpath *pgpath = NULL;
480 unsigned must_queue = 1;
481 unsigned long flags;
483 spin_lock_irqsave(&m->lock, flags);
485 if (!m->queue_size)
486 goto out;
488 if (!m->current_pgpath)
489 __choose_pgpath(m, 0);
491 pgpath = m->current_pgpath;
493 if ((pgpath && !m->queue_io) ||
494 (!pgpath && !m->queue_if_no_path))
495 must_queue = 0;
497 if (m->pg_init_required && !m->pg_init_in_progress && pgpath &&
498 !m->pg_init_disabled)
499 __pg_init_all_paths(m);
501 out:
502 spin_unlock_irqrestore(&m->lock, flags);
503 if (!must_queue)
504 dispatch_queued_ios(m);
508 * An event is triggered whenever a path is taken out of use.
509 * Includes path failure and PG bypass.
511 static void trigger_event(struct work_struct *work)
513 struct multipath *m =
514 container_of(work, struct multipath, trigger_event);
516 dm_table_event(m->ti->table);
519 /*-----------------------------------------------------------------
520 * Constructor/argument parsing:
521 * <#multipath feature args> [<arg>]*
522 * <#hw_handler args> [hw_handler [<arg>]*]
523 * <#priority groups>
524 * <initial priority group>
525 * [<selector> <#selector args> [<arg>]*
526 * <#paths> <#per-path selector args>
527 * [<path> [<arg>]* ]+ ]+
528 *---------------------------------------------------------------*/
529 static int parse_path_selector(struct dm_arg_set *as, struct priority_group *pg,
530 struct dm_target *ti)
532 int r;
533 struct path_selector_type *pst;
534 unsigned ps_argc;
536 static struct dm_arg _args[] = {
537 {0, 1024, "invalid number of path selector args"},
540 pst = dm_get_path_selector(dm_shift_arg(as));
541 if (!pst) {
542 ti->error = "unknown path selector type";
543 return -EINVAL;
546 r = dm_read_arg_group(_args, as, &ps_argc, &ti->error);
547 if (r) {
548 dm_put_path_selector(pst);
549 return -EINVAL;
552 r = pst->create(&pg->ps, ps_argc, as->argv);
553 if (r) {
554 dm_put_path_selector(pst);
555 ti->error = "path selector constructor failed";
556 return r;
559 pg->ps.type = pst;
560 dm_consume_args(as, ps_argc);
562 return 0;
565 static struct pgpath *parse_path(struct dm_arg_set *as, struct path_selector *ps,
566 struct dm_target *ti)
568 int r;
569 struct pgpath *p;
570 struct multipath *m = ti->private;
572 /* we need at least a path arg */
573 if (as->argc < 1) {
574 ti->error = "no device given";
575 return ERR_PTR(-EINVAL);
578 p = alloc_pgpath();
579 if (!p)
580 return ERR_PTR(-ENOMEM);
582 r = dm_get_device(ti, dm_shift_arg(as), dm_table_get_mode(ti->table),
583 &p->path.dev);
584 if (r) {
585 ti->error = "error getting device";
586 goto bad;
589 if (m->hw_handler_name) {
590 struct request_queue *q = bdev_get_queue(p->path.dev->bdev);
592 r = scsi_dh_attach(q, m->hw_handler_name);
593 if (r == -EBUSY) {
595 * Already attached to different hw_handler,
596 * try to reattach with correct one.
598 scsi_dh_detach(q);
599 r = scsi_dh_attach(q, m->hw_handler_name);
602 if (r < 0) {
603 ti->error = "error attaching hardware handler";
604 dm_put_device(ti, p->path.dev);
605 goto bad;
608 if (m->hw_handler_params) {
609 r = scsi_dh_set_params(q, m->hw_handler_params);
610 if (r < 0) {
611 ti->error = "unable to set hardware "
612 "handler parameters";
613 scsi_dh_detach(q);
614 dm_put_device(ti, p->path.dev);
615 goto bad;
620 r = ps->type->add_path(ps, &p->path, as->argc, as->argv, &ti->error);
621 if (r) {
622 dm_put_device(ti, p->path.dev);
623 goto bad;
626 return p;
628 bad:
629 free_pgpath(p);
630 return ERR_PTR(r);
633 static struct priority_group *parse_priority_group(struct dm_arg_set *as,
634 struct multipath *m)
636 static struct dm_arg _args[] = {
637 {1, 1024, "invalid number of paths"},
638 {0, 1024, "invalid number of selector args"}
641 int r;
642 unsigned i, nr_selector_args, nr_args;
643 struct priority_group *pg;
644 struct dm_target *ti = m->ti;
646 if (as->argc < 2) {
647 as->argc = 0;
648 ti->error = "not enough priority group arguments";
649 return ERR_PTR(-EINVAL);
652 pg = alloc_priority_group();
653 if (!pg) {
654 ti->error = "couldn't allocate priority group";
655 return ERR_PTR(-ENOMEM);
657 pg->m = m;
659 r = parse_path_selector(as, pg, ti);
660 if (r)
661 goto bad;
664 * read the paths
666 r = dm_read_arg(_args, as, &pg->nr_pgpaths, &ti->error);
667 if (r)
668 goto bad;
670 r = dm_read_arg(_args + 1, as, &nr_selector_args, &ti->error);
671 if (r)
672 goto bad;
674 nr_args = 1 + nr_selector_args;
675 for (i = 0; i < pg->nr_pgpaths; i++) {
676 struct pgpath *pgpath;
677 struct dm_arg_set path_args;
679 if (as->argc < nr_args) {
680 ti->error = "not enough path parameters";
681 r = -EINVAL;
682 goto bad;
685 path_args.argc = nr_args;
686 path_args.argv = as->argv;
688 pgpath = parse_path(&path_args, &pg->ps, ti);
689 if (IS_ERR(pgpath)) {
690 r = PTR_ERR(pgpath);
691 goto bad;
694 pgpath->pg = pg;
695 list_add_tail(&pgpath->list, &pg->pgpaths);
696 dm_consume_args(as, nr_args);
699 return pg;
701 bad:
702 free_priority_group(pg, ti);
703 return ERR_PTR(r);
706 static int parse_hw_handler(struct dm_arg_set *as, struct multipath *m)
708 unsigned hw_argc;
709 int ret;
710 struct dm_target *ti = m->ti;
712 static struct dm_arg _args[] = {
713 {0, 1024, "invalid number of hardware handler args"},
716 if (dm_read_arg_group(_args, as, &hw_argc, &ti->error))
717 return -EINVAL;
719 if (!hw_argc)
720 return 0;
722 m->hw_handler_name = kstrdup(dm_shift_arg(as), GFP_KERNEL);
723 if (!try_then_request_module(scsi_dh_handler_exist(m->hw_handler_name),
724 "scsi_dh_%s", m->hw_handler_name)) {
725 ti->error = "unknown hardware handler type";
726 ret = -EINVAL;
727 goto fail;
730 if (hw_argc > 1) {
731 char *p;
732 int i, j, len = 4;
734 for (i = 0; i <= hw_argc - 2; i++)
735 len += strlen(as->argv[i]) + 1;
736 p = m->hw_handler_params = kzalloc(len, GFP_KERNEL);
737 if (!p) {
738 ti->error = "memory allocation failed";
739 ret = -ENOMEM;
740 goto fail;
742 j = sprintf(p, "%d", hw_argc - 1);
743 for (i = 0, p+=j+1; i <= hw_argc - 2; i++, p+=j+1)
744 j = sprintf(p, "%s", as->argv[i]);
746 dm_consume_args(as, hw_argc - 1);
748 return 0;
749 fail:
750 kfree(m->hw_handler_name);
751 m->hw_handler_name = NULL;
752 return ret;
755 static int parse_features(struct dm_arg_set *as, struct multipath *m)
757 int r;
758 unsigned argc;
759 struct dm_target *ti = m->ti;
760 const char *arg_name;
762 static struct dm_arg _args[] = {
763 {0, 5, "invalid number of feature args"},
764 {1, 50, "pg_init_retries must be between 1 and 50"},
765 {0, 60000, "pg_init_delay_msecs must be between 0 and 60000"},
768 r = dm_read_arg_group(_args, as, &argc, &ti->error);
769 if (r)
770 return -EINVAL;
772 if (!argc)
773 return 0;
775 do {
776 arg_name = dm_shift_arg(as);
777 argc--;
779 if (!strcasecmp(arg_name, "queue_if_no_path")) {
780 r = queue_if_no_path(m, 1, 0);
781 continue;
784 if (!strcasecmp(arg_name, "pg_init_retries") &&
785 (argc >= 1)) {
786 r = dm_read_arg(_args + 1, as, &m->pg_init_retries, &ti->error);
787 argc--;
788 continue;
791 if (!strcasecmp(arg_name, "pg_init_delay_msecs") &&
792 (argc >= 1)) {
793 r = dm_read_arg(_args + 2, as, &m->pg_init_delay_msecs, &ti->error);
794 argc--;
795 continue;
798 ti->error = "Unrecognised multipath feature request";
799 r = -EINVAL;
800 } while (argc && !r);
802 return r;
805 static int multipath_ctr(struct dm_target *ti, unsigned int argc,
806 char **argv)
808 /* target arguments */
809 static struct dm_arg _args[] = {
810 {0, 1024, "invalid number of priority groups"},
811 {0, 1024, "invalid initial priority group number"},
814 int r;
815 struct multipath *m;
816 struct dm_arg_set as;
817 unsigned pg_count = 0;
818 unsigned next_pg_num;
820 as.argc = argc;
821 as.argv = argv;
823 m = alloc_multipath(ti);
824 if (!m) {
825 ti->error = "can't allocate multipath";
826 return -EINVAL;
829 r = parse_features(&as, m);
830 if (r)
831 goto bad;
833 r = parse_hw_handler(&as, m);
834 if (r)
835 goto bad;
837 r = dm_read_arg(_args, &as, &m->nr_priority_groups, &ti->error);
838 if (r)
839 goto bad;
841 r = dm_read_arg(_args + 1, &as, &next_pg_num, &ti->error);
842 if (r)
843 goto bad;
845 if ((!m->nr_priority_groups && next_pg_num) ||
846 (m->nr_priority_groups && !next_pg_num)) {
847 ti->error = "invalid initial priority group";
848 r = -EINVAL;
849 goto bad;
852 /* parse the priority groups */
853 while (as.argc) {
854 struct priority_group *pg;
856 pg = parse_priority_group(&as, m);
857 if (IS_ERR(pg)) {
858 r = PTR_ERR(pg);
859 goto bad;
862 m->nr_valid_paths += pg->nr_pgpaths;
863 list_add_tail(&pg->list, &m->priority_groups);
864 pg_count++;
865 pg->pg_num = pg_count;
866 if (!--next_pg_num)
867 m->next_pg = pg;
870 if (pg_count != m->nr_priority_groups) {
871 ti->error = "priority group count mismatch";
872 r = -EINVAL;
873 goto bad;
876 ti->num_flush_requests = 1;
877 ti->num_discard_requests = 1;
879 return 0;
881 bad:
882 free_multipath(m);
883 return r;
886 static void multipath_wait_for_pg_init_completion(struct multipath *m)
888 DECLARE_WAITQUEUE(wait, current);
889 unsigned long flags;
891 add_wait_queue(&m->pg_init_wait, &wait);
893 while (1) {
894 set_current_state(TASK_UNINTERRUPTIBLE);
896 spin_lock_irqsave(&m->lock, flags);
897 if (!m->pg_init_in_progress) {
898 spin_unlock_irqrestore(&m->lock, flags);
899 break;
901 spin_unlock_irqrestore(&m->lock, flags);
903 io_schedule();
905 set_current_state(TASK_RUNNING);
907 remove_wait_queue(&m->pg_init_wait, &wait);
910 static void flush_multipath_work(struct multipath *m)
912 unsigned long flags;
914 spin_lock_irqsave(&m->lock, flags);
915 m->pg_init_disabled = 1;
916 spin_unlock_irqrestore(&m->lock, flags);
918 flush_workqueue(kmpath_handlerd);
919 multipath_wait_for_pg_init_completion(m);
920 flush_workqueue(kmultipathd);
921 flush_work_sync(&m->trigger_event);
923 spin_lock_irqsave(&m->lock, flags);
924 m->pg_init_disabled = 0;
925 spin_unlock_irqrestore(&m->lock, flags);
928 static void multipath_dtr(struct dm_target *ti)
930 struct multipath *m = ti->private;
932 flush_multipath_work(m);
933 free_multipath(m);
937 * Map cloned requests
939 static int multipath_map(struct dm_target *ti, struct request *clone,
940 union map_info *map_context)
942 int r;
943 struct multipath *m = (struct multipath *) ti->private;
945 if (set_mapinfo(m, map_context) < 0)
946 /* ENOMEM, requeue */
947 return DM_MAPIO_REQUEUE;
949 clone->cmd_flags |= REQ_FAILFAST_TRANSPORT;
950 r = map_io(m, clone, map_context, 0);
951 if (r < 0 || r == DM_MAPIO_REQUEUE)
952 clear_mapinfo(m, map_context);
954 return r;
958 * Take a path out of use.
960 static int fail_path(struct pgpath *pgpath)
962 unsigned long flags;
963 struct multipath *m = pgpath->pg->m;
965 spin_lock_irqsave(&m->lock, flags);
967 if (!pgpath->is_active)
968 goto out;
970 DMWARN("Failing path %s.", pgpath->path.dev->name);
972 pgpath->pg->ps.type->fail_path(&pgpath->pg->ps, &pgpath->path);
973 pgpath->is_active = 0;
974 pgpath->fail_count++;
976 m->nr_valid_paths--;
978 if (pgpath == m->current_pgpath)
979 m->current_pgpath = NULL;
981 dm_path_uevent(DM_UEVENT_PATH_FAILED, m->ti,
982 pgpath->path.dev->name, m->nr_valid_paths);
984 schedule_work(&m->trigger_event);
986 out:
987 spin_unlock_irqrestore(&m->lock, flags);
989 return 0;
993 * Reinstate a previously-failed path
995 static int reinstate_path(struct pgpath *pgpath)
997 int r = 0;
998 unsigned long flags;
999 struct multipath *m = pgpath->pg->m;
1001 spin_lock_irqsave(&m->lock, flags);
1003 if (pgpath->is_active)
1004 goto out;
1006 if (!pgpath->pg->ps.type->reinstate_path) {
1007 DMWARN("Reinstate path not supported by path selector %s",
1008 pgpath->pg->ps.type->name);
1009 r = -EINVAL;
1010 goto out;
1013 r = pgpath->pg->ps.type->reinstate_path(&pgpath->pg->ps, &pgpath->path);
1014 if (r)
1015 goto out;
1017 pgpath->is_active = 1;
1019 if (!m->nr_valid_paths++ && m->queue_size) {
1020 m->current_pgpath = NULL;
1021 queue_work(kmultipathd, &m->process_queued_ios);
1022 } else if (m->hw_handler_name && (m->current_pg == pgpath->pg)) {
1023 if (queue_work(kmpath_handlerd, &pgpath->activate_path.work))
1024 m->pg_init_in_progress++;
1027 dm_path_uevent(DM_UEVENT_PATH_REINSTATED, m->ti,
1028 pgpath->path.dev->name, m->nr_valid_paths);
1030 schedule_work(&m->trigger_event);
1032 out:
1033 spin_unlock_irqrestore(&m->lock, flags);
1035 return r;
1039 * Fail or reinstate all paths that match the provided struct dm_dev.
1041 static int action_dev(struct multipath *m, struct dm_dev *dev,
1042 action_fn action)
1044 int r = -EINVAL;
1045 struct pgpath *pgpath;
1046 struct priority_group *pg;
1048 list_for_each_entry(pg, &m->priority_groups, list) {
1049 list_for_each_entry(pgpath, &pg->pgpaths, list) {
1050 if (pgpath->path.dev == dev)
1051 r = action(pgpath);
1055 return r;
1059 * Temporarily try to avoid having to use the specified PG
1061 static void bypass_pg(struct multipath *m, struct priority_group *pg,
1062 int bypassed)
1064 unsigned long flags;
1066 spin_lock_irqsave(&m->lock, flags);
1068 pg->bypassed = bypassed;
1069 m->current_pgpath = NULL;
1070 m->current_pg = NULL;
1072 spin_unlock_irqrestore(&m->lock, flags);
1074 schedule_work(&m->trigger_event);
1078 * Switch to using the specified PG from the next I/O that gets mapped
1080 static int switch_pg_num(struct multipath *m, const char *pgstr)
1082 struct priority_group *pg;
1083 unsigned pgnum;
1084 unsigned long flags;
1085 char dummy;
1087 if (!pgstr || (sscanf(pgstr, "%u%c", &pgnum, &dummy) != 1) || !pgnum ||
1088 (pgnum > m->nr_priority_groups)) {
1089 DMWARN("invalid PG number supplied to switch_pg_num");
1090 return -EINVAL;
1093 spin_lock_irqsave(&m->lock, flags);
1094 list_for_each_entry(pg, &m->priority_groups, list) {
1095 pg->bypassed = 0;
1096 if (--pgnum)
1097 continue;
1099 m->current_pgpath = NULL;
1100 m->current_pg = NULL;
1101 m->next_pg = pg;
1103 spin_unlock_irqrestore(&m->lock, flags);
1105 schedule_work(&m->trigger_event);
1106 return 0;
1110 * Set/clear bypassed status of a PG.
1111 * PGs are numbered upwards from 1 in the order they were declared.
1113 static int bypass_pg_num(struct multipath *m, const char *pgstr, int bypassed)
1115 struct priority_group *pg;
1116 unsigned pgnum;
1117 char dummy;
1119 if (!pgstr || (sscanf(pgstr, "%u%c", &pgnum, &dummy) != 1) || !pgnum ||
1120 (pgnum > m->nr_priority_groups)) {
1121 DMWARN("invalid PG number supplied to bypass_pg");
1122 return -EINVAL;
1125 list_for_each_entry(pg, &m->priority_groups, list) {
1126 if (!--pgnum)
1127 break;
1130 bypass_pg(m, pg, bypassed);
1131 return 0;
1135 * Should we retry pg_init immediately?
1137 static int pg_init_limit_reached(struct multipath *m, struct pgpath *pgpath)
1139 unsigned long flags;
1140 int limit_reached = 0;
1142 spin_lock_irqsave(&m->lock, flags);
1144 if (m->pg_init_count <= m->pg_init_retries && !m->pg_init_disabled)
1145 m->pg_init_required = 1;
1146 else
1147 limit_reached = 1;
1149 spin_unlock_irqrestore(&m->lock, flags);
1151 return limit_reached;
1154 static void pg_init_done(void *data, int errors)
1156 struct pgpath *pgpath = data;
1157 struct priority_group *pg = pgpath->pg;
1158 struct multipath *m = pg->m;
1159 unsigned long flags;
1160 unsigned delay_retry = 0;
1162 /* device or driver problems */
1163 switch (errors) {
1164 case SCSI_DH_OK:
1165 break;
1166 case SCSI_DH_NOSYS:
1167 if (!m->hw_handler_name) {
1168 errors = 0;
1169 break;
1171 DMERR("Could not failover the device: Handler scsi_dh_%s "
1172 "Error %d.", m->hw_handler_name, errors);
1174 * Fail path for now, so we do not ping pong
1176 fail_path(pgpath);
1177 break;
1178 case SCSI_DH_DEV_TEMP_BUSY:
1180 * Probably doing something like FW upgrade on the
1181 * controller so try the other pg.
1183 bypass_pg(m, pg, 1);
1184 break;
1185 case SCSI_DH_RETRY:
1186 /* Wait before retrying. */
1187 delay_retry = 1;
1188 case SCSI_DH_IMM_RETRY:
1189 case SCSI_DH_RES_TEMP_UNAVAIL:
1190 if (pg_init_limit_reached(m, pgpath))
1191 fail_path(pgpath);
1192 errors = 0;
1193 break;
1194 default:
1196 * We probably do not want to fail the path for a device
1197 * error, but this is what the old dm did. In future
1198 * patches we can do more advanced handling.
1200 fail_path(pgpath);
1203 spin_lock_irqsave(&m->lock, flags);
1204 if (errors) {
1205 if (pgpath == m->current_pgpath) {
1206 DMERR("Could not failover device. Error %d.", errors);
1207 m->current_pgpath = NULL;
1208 m->current_pg = NULL;
1210 } else if (!m->pg_init_required)
1211 pg->bypassed = 0;
1213 if (--m->pg_init_in_progress)
1214 /* Activations of other paths are still on going */
1215 goto out;
1217 if (!m->pg_init_required)
1218 m->queue_io = 0;
1220 m->pg_init_delay_retry = delay_retry;
1221 queue_work(kmultipathd, &m->process_queued_ios);
1224 * Wake up any thread waiting to suspend.
1226 wake_up(&m->pg_init_wait);
1228 out:
1229 spin_unlock_irqrestore(&m->lock, flags);
1232 static void activate_path(struct work_struct *work)
1234 struct pgpath *pgpath =
1235 container_of(work, struct pgpath, activate_path.work);
1237 scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
1238 pg_init_done, pgpath);
1242 * end_io handling
1244 static int do_end_io(struct multipath *m, struct request *clone,
1245 int error, struct dm_mpath_io *mpio)
1248 * We don't queue any clone request inside the multipath target
1249 * during end I/O handling, since those clone requests don't have
1250 * bio clones. If we queue them inside the multipath target,
1251 * we need to make bio clones, that requires memory allocation.
1252 * (See drivers/md/dm.c:end_clone_bio() about why the clone requests
1253 * don't have bio clones.)
1254 * Instead of queueing the clone request here, we queue the original
1255 * request into dm core, which will remake a clone request and
1256 * clone bios for it and resubmit it later.
1258 int r = DM_ENDIO_REQUEUE;
1259 unsigned long flags;
1261 if (!error && !clone->errors)
1262 return 0; /* I/O complete */
1264 if (error == -EOPNOTSUPP || error == -EREMOTEIO || error == -EILSEQ)
1265 return error;
1267 if (mpio->pgpath)
1268 fail_path(mpio->pgpath);
1270 spin_lock_irqsave(&m->lock, flags);
1271 if (!m->nr_valid_paths) {
1272 if (!m->queue_if_no_path) {
1273 if (!__must_push_back(m))
1274 r = -EIO;
1275 } else {
1276 if (error == -EBADE)
1277 r = error;
1280 spin_unlock_irqrestore(&m->lock, flags);
1282 return r;
1285 static int multipath_end_io(struct dm_target *ti, struct request *clone,
1286 int error, union map_info *map_context)
1288 struct multipath *m = ti->private;
1289 struct dm_mpath_io *mpio = map_context->ptr;
1290 struct pgpath *pgpath = mpio->pgpath;
1291 struct path_selector *ps;
1292 int r;
1294 BUG_ON(!mpio);
1296 r = do_end_io(m, clone, error, mpio);
1297 if (pgpath) {
1298 ps = &pgpath->pg->ps;
1299 if (ps->type->end_io)
1300 ps->type->end_io(ps, &pgpath->path, mpio->nr_bytes);
1302 clear_mapinfo(m, map_context);
1304 return r;
1308 * Suspend can't complete until all the I/O is processed so if
1309 * the last path fails we must error any remaining I/O.
1310 * Note that if the freeze_bdev fails while suspending, the
1311 * queue_if_no_path state is lost - userspace should reset it.
1313 static void multipath_presuspend(struct dm_target *ti)
1315 struct multipath *m = (struct multipath *) ti->private;
1317 queue_if_no_path(m, 0, 1);
1320 static void multipath_postsuspend(struct dm_target *ti)
1322 struct multipath *m = ti->private;
1324 mutex_lock(&m->work_mutex);
1325 flush_multipath_work(m);
1326 mutex_unlock(&m->work_mutex);
1330 * Restore the queue_if_no_path setting.
1332 static void multipath_resume(struct dm_target *ti)
1334 struct multipath *m = (struct multipath *) ti->private;
1335 unsigned long flags;
1337 spin_lock_irqsave(&m->lock, flags);
1338 m->queue_if_no_path = m->saved_queue_if_no_path;
1339 spin_unlock_irqrestore(&m->lock, flags);
1343 * Info output has the following format:
1344 * num_multipath_feature_args [multipath_feature_args]*
1345 * num_handler_status_args [handler_status_args]*
1346 * num_groups init_group_number
1347 * [A|D|E num_ps_status_args [ps_status_args]*
1348 * num_paths num_selector_args
1349 * [path_dev A|F fail_count [selector_args]* ]+ ]+
1351 * Table output has the following format (identical to the constructor string):
1352 * num_feature_args [features_args]*
1353 * num_handler_args hw_handler [hw_handler_args]*
1354 * num_groups init_group_number
1355 * [priority selector-name num_ps_args [ps_args]*
1356 * num_paths num_selector_args [path_dev [selector_args]* ]+ ]+
1358 static void multipath_status(struct dm_target *ti, status_type_t type,
1359 char *result, unsigned int maxlen)
1361 int sz = 0;
1362 unsigned long flags;
1363 struct multipath *m = (struct multipath *) ti->private;
1364 struct priority_group *pg;
1365 struct pgpath *p;
1366 unsigned pg_num;
1367 char state;
1369 spin_lock_irqsave(&m->lock, flags);
1371 /* Features */
1372 if (type == STATUSTYPE_INFO)
1373 DMEMIT("2 %u %u ", m->queue_size, m->pg_init_count);
1374 else {
1375 DMEMIT("%u ", m->queue_if_no_path +
1376 (m->pg_init_retries > 0) * 2 +
1377 (m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT) * 2);
1378 if (m->queue_if_no_path)
1379 DMEMIT("queue_if_no_path ");
1380 if (m->pg_init_retries)
1381 DMEMIT("pg_init_retries %u ", m->pg_init_retries);
1382 if (m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT)
1383 DMEMIT("pg_init_delay_msecs %u ", m->pg_init_delay_msecs);
1386 if (!m->hw_handler_name || type == STATUSTYPE_INFO)
1387 DMEMIT("0 ");
1388 else
1389 DMEMIT("1 %s ", m->hw_handler_name);
1391 DMEMIT("%u ", m->nr_priority_groups);
1393 if (m->next_pg)
1394 pg_num = m->next_pg->pg_num;
1395 else if (m->current_pg)
1396 pg_num = m->current_pg->pg_num;
1397 else
1398 pg_num = (m->nr_priority_groups ? 1 : 0);
1400 DMEMIT("%u ", pg_num);
1402 switch (type) {
1403 case STATUSTYPE_INFO:
1404 list_for_each_entry(pg, &m->priority_groups, list) {
1405 if (pg->bypassed)
1406 state = 'D'; /* Disabled */
1407 else if (pg == m->current_pg)
1408 state = 'A'; /* Currently Active */
1409 else
1410 state = 'E'; /* Enabled */
1412 DMEMIT("%c ", state);
1414 if (pg->ps.type->status)
1415 sz += pg->ps.type->status(&pg->ps, NULL, type,
1416 result + sz,
1417 maxlen - sz);
1418 else
1419 DMEMIT("0 ");
1421 DMEMIT("%u %u ", pg->nr_pgpaths,
1422 pg->ps.type->info_args);
1424 list_for_each_entry(p, &pg->pgpaths, list) {
1425 DMEMIT("%s %s %u ", p->path.dev->name,
1426 p->is_active ? "A" : "F",
1427 p->fail_count);
1428 if (pg->ps.type->status)
1429 sz += pg->ps.type->status(&pg->ps,
1430 &p->path, type, result + sz,
1431 maxlen - sz);
1434 break;
1436 case STATUSTYPE_TABLE:
1437 list_for_each_entry(pg, &m->priority_groups, list) {
1438 DMEMIT("%s ", pg->ps.type->name);
1440 if (pg->ps.type->status)
1441 sz += pg->ps.type->status(&pg->ps, NULL, type,
1442 result + sz,
1443 maxlen - sz);
1444 else
1445 DMEMIT("0 ");
1447 DMEMIT("%u %u ", pg->nr_pgpaths,
1448 pg->ps.type->table_args);
1450 list_for_each_entry(p, &pg->pgpaths, list) {
1451 DMEMIT("%s ", p->path.dev->name);
1452 if (pg->ps.type->status)
1453 sz += pg->ps.type->status(&pg->ps,
1454 &p->path, type, result + sz,
1455 maxlen - sz);
1458 break;
1461 spin_unlock_irqrestore(&m->lock, flags);
1464 static int multipath_message(struct dm_target *ti, unsigned argc, char **argv)
1466 int r = -EINVAL;
1467 struct dm_dev *dev;
1468 struct multipath *m = (struct multipath *) ti->private;
1469 action_fn action;
1471 mutex_lock(&m->work_mutex);
1473 if (dm_suspended(ti)) {
1474 r = -EBUSY;
1475 goto out;
1478 if (argc == 1) {
1479 if (!strcasecmp(argv[0], "queue_if_no_path")) {
1480 r = queue_if_no_path(m, 1, 0);
1481 goto out;
1482 } else if (!strcasecmp(argv[0], "fail_if_no_path")) {
1483 r = queue_if_no_path(m, 0, 0);
1484 goto out;
1488 if (argc != 2) {
1489 DMWARN("Unrecognised multipath message received.");
1490 goto out;
1493 if (!strcasecmp(argv[0], "disable_group")) {
1494 r = bypass_pg_num(m, argv[1], 1);
1495 goto out;
1496 } else if (!strcasecmp(argv[0], "enable_group")) {
1497 r = bypass_pg_num(m, argv[1], 0);
1498 goto out;
1499 } else if (!strcasecmp(argv[0], "switch_group")) {
1500 r = switch_pg_num(m, argv[1]);
1501 goto out;
1502 } else if (!strcasecmp(argv[0], "reinstate_path"))
1503 action = reinstate_path;
1504 else if (!strcasecmp(argv[0], "fail_path"))
1505 action = fail_path;
1506 else {
1507 DMWARN("Unrecognised multipath message received.");
1508 goto out;
1511 r = dm_get_device(ti, argv[1], dm_table_get_mode(ti->table), &dev);
1512 if (r) {
1513 DMWARN("message: error getting device %s",
1514 argv[1]);
1515 goto out;
1518 r = action_dev(m, dev, action);
1520 dm_put_device(ti, dev);
1522 out:
1523 mutex_unlock(&m->work_mutex);
1524 return r;
1527 static int multipath_ioctl(struct dm_target *ti, unsigned int cmd,
1528 unsigned long arg)
1530 struct multipath *m = (struct multipath *) ti->private;
1531 struct block_device *bdev = NULL;
1532 fmode_t mode = 0;
1533 unsigned long flags;
1534 int r = 0;
1536 spin_lock_irqsave(&m->lock, flags);
1538 if (!m->current_pgpath)
1539 __choose_pgpath(m, 0);
1541 if (m->current_pgpath) {
1542 bdev = m->current_pgpath->path.dev->bdev;
1543 mode = m->current_pgpath->path.dev->mode;
1546 if (m->queue_io)
1547 r = -EAGAIN;
1548 else if (!bdev)
1549 r = -EIO;
1551 spin_unlock_irqrestore(&m->lock, flags);
1554 * Only pass ioctls through if the device sizes match exactly.
1556 if (!bdev || ti->len != i_size_read(bdev->bd_inode) >> SECTOR_SHIFT) {
1557 int err = scsi_verify_blk_ioctl(NULL, cmd);
1558 if (err)
1559 r = err;
1562 return r ? : __blkdev_driver_ioctl(bdev, mode, cmd, arg);
1565 static int multipath_iterate_devices(struct dm_target *ti,
1566 iterate_devices_callout_fn fn, void *data)
1568 struct multipath *m = ti->private;
1569 struct priority_group *pg;
1570 struct pgpath *p;
1571 int ret = 0;
1573 list_for_each_entry(pg, &m->priority_groups, list) {
1574 list_for_each_entry(p, &pg->pgpaths, list) {
1575 ret = fn(ti, p->path.dev, ti->begin, ti->len, data);
1576 if (ret)
1577 goto out;
1581 out:
1582 return ret;
1585 static int __pgpath_busy(struct pgpath *pgpath)
1587 struct request_queue *q = bdev_get_queue(pgpath->path.dev->bdev);
1589 return dm_underlying_device_busy(q);
1593 * We return "busy", only when we can map I/Os but underlying devices
1594 * are busy (so even if we map I/Os now, the I/Os will wait on
1595 * the underlying queue).
1596 * In other words, if we want to kill I/Os or queue them inside us
1597 * due to map unavailability, we don't return "busy". Otherwise,
1598 * dm core won't give us the I/Os and we can't do what we want.
1600 static int multipath_busy(struct dm_target *ti)
1602 int busy = 0, has_active = 0;
1603 struct multipath *m = ti->private;
1604 struct priority_group *pg;
1605 struct pgpath *pgpath;
1606 unsigned long flags;
1608 spin_lock_irqsave(&m->lock, flags);
1610 /* Guess which priority_group will be used at next mapping time */
1611 if (unlikely(!m->current_pgpath && m->next_pg))
1612 pg = m->next_pg;
1613 else if (likely(m->current_pg))
1614 pg = m->current_pg;
1615 else
1617 * We don't know which pg will be used at next mapping time.
1618 * We don't call __choose_pgpath() here to avoid to trigger
1619 * pg_init just by busy checking.
1620 * So we don't know whether underlying devices we will be using
1621 * at next mapping time are busy or not. Just try mapping.
1623 goto out;
1626 * If there is one non-busy active path at least, the path selector
1627 * will be able to select it. So we consider such a pg as not busy.
1629 busy = 1;
1630 list_for_each_entry(pgpath, &pg->pgpaths, list)
1631 if (pgpath->is_active) {
1632 has_active = 1;
1634 if (!__pgpath_busy(pgpath)) {
1635 busy = 0;
1636 break;
1640 if (!has_active)
1642 * No active path in this pg, so this pg won't be used and
1643 * the current_pg will be changed at next mapping time.
1644 * We need to try mapping to determine it.
1646 busy = 0;
1648 out:
1649 spin_unlock_irqrestore(&m->lock, flags);
1651 return busy;
1654 /*-----------------------------------------------------------------
1655 * Module setup
1656 *---------------------------------------------------------------*/
1657 static struct target_type multipath_target = {
1658 .name = "multipath",
1659 .version = {1, 3, 2},
1660 .module = THIS_MODULE,
1661 .ctr = multipath_ctr,
1662 .dtr = multipath_dtr,
1663 .map_rq = multipath_map,
1664 .rq_end_io = multipath_end_io,
1665 .presuspend = multipath_presuspend,
1666 .postsuspend = multipath_postsuspend,
1667 .resume = multipath_resume,
1668 .status = multipath_status,
1669 .message = multipath_message,
1670 .ioctl = multipath_ioctl,
1671 .iterate_devices = multipath_iterate_devices,
1672 .busy = multipath_busy,
1675 static int __init dm_multipath_init(void)
1677 int r;
1679 /* allocate a slab for the dm_ios */
1680 _mpio_cache = KMEM_CACHE(dm_mpath_io, 0);
1681 if (!_mpio_cache)
1682 return -ENOMEM;
1684 r = dm_register_target(&multipath_target);
1685 if (r < 0) {
1686 DMERR("register failed %d", r);
1687 kmem_cache_destroy(_mpio_cache);
1688 return -EINVAL;
1691 kmultipathd = alloc_workqueue("kmpathd", WQ_MEM_RECLAIM, 0);
1692 if (!kmultipathd) {
1693 DMERR("failed to create workqueue kmpathd");
1694 dm_unregister_target(&multipath_target);
1695 kmem_cache_destroy(_mpio_cache);
1696 return -ENOMEM;
1700 * A separate workqueue is used to handle the device handlers
1701 * to avoid overloading existing workqueue. Overloading the
1702 * old workqueue would also create a bottleneck in the
1703 * path of the storage hardware device activation.
1705 kmpath_handlerd = alloc_ordered_workqueue("kmpath_handlerd",
1706 WQ_MEM_RECLAIM);
1707 if (!kmpath_handlerd) {
1708 DMERR("failed to create workqueue kmpath_handlerd");
1709 destroy_workqueue(kmultipathd);
1710 dm_unregister_target(&multipath_target);
1711 kmem_cache_destroy(_mpio_cache);
1712 return -ENOMEM;
1715 DMINFO("version %u.%u.%u loaded",
1716 multipath_target.version[0], multipath_target.version[1],
1717 multipath_target.version[2]);
1719 return r;
1722 static void __exit dm_multipath_exit(void)
1724 destroy_workqueue(kmpath_handlerd);
1725 destroy_workqueue(kmultipathd);
1727 dm_unregister_target(&multipath_target);
1728 kmem_cache_destroy(_mpio_cache);
1731 module_init(dm_multipath_init);
1732 module_exit(dm_multipath_exit);
1734 MODULE_DESCRIPTION(DM_NAME " multipath target");
1735 MODULE_AUTHOR("Sistina Software <dm-devel@redhat.com>");
1736 MODULE_LICENSE("GPL");