[PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspend
[linux/fpc-iii.git] / drivers / pcmcia / sa1100_jornada720.c
blob7a87298bae993f0cadc5676a377f4ae2b65851c9
1 /*
2 * drivers/pcmcia/sa1100_jornada720.c
4 * Jornada720 PCMCIA specific routines
6 */
7 #include <linux/module.h>
8 #include <linux/kernel.h>
9 #include <linux/sched.h>
10 #include <linux/device.h>
11 #include <linux/errno.h>
12 #include <linux/init.h>
14 #include <asm/hardware.h>
15 #include <asm/hardware/sa1111.h>
16 #include <asm/mach-types.h>
18 #include "sa1111_generic.h"
20 #define SOCKET0_POWER GPIO_GPIO0
21 #define SOCKET0_3V GPIO_GPIO2
22 #define SOCKET1_POWER (GPIO_GPIO1 | GPIO_GPIO3)
23 #warning *** Does SOCKET1_3V actually do anything?
24 #define SOCKET1_3V GPIO_GPIO3
26 static int jornada720_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
29 * What is all this crap for?
31 GRER |= 0x00000002;
32 /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */
33 sa1111_set_io_dir(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
34 sa1111_set_io(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
35 sa1111_set_sleep_io(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
37 return sa1111_pcmcia_hw_init(skt);
40 static int
41 jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
43 unsigned int pa_dwr_mask, pa_dwr_set;
44 int ret;
46 printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
47 skt->nr, state->Vcc, state->Vpp);
49 switch (skt->nr) {
50 case 0:
51 pa_dwr_mask = SOCKET0_POWER | SOCKET0_3V;
53 switch (state->Vcc) {
54 default:
55 case 0: pa_dwr_set = 0; break;
56 case 33: pa_dwr_set = SOCKET0_POWER | SOCKET0_3V; break;
57 case 50: pa_dwr_set = SOCKET0_POWER; break;
59 break;
61 case 1:
62 pa_dwr_mask = SOCKET1_POWER;
64 switch (state->Vcc) {
65 default:
66 case 0: pa_dwr_set = 0; break;
67 case 33: pa_dwr_set = SOCKET1_POWER; break;
68 case 50: pa_dwr_set = SOCKET1_POWER; break;
70 break;
72 default:
73 return -1;
76 if (state->Vpp != state->Vcc && state->Vpp != 0) {
77 printk(KERN_ERR "%s(): slot cannot support VPP %u\n",
78 __FUNCTION__, state->Vpp);
79 return -1;
82 ret = sa1111_pcmcia_configure_socket(skt, state);
83 if (ret == 0) {
84 unsigned long flags;
86 local_irq_save(flags);
87 sa1111_set_io(SA1111_DEV(skt->dev), pa_dwr_mask, pa_dwr_set);
88 local_irq_restore(flags);
91 return ret;
94 static struct pcmcia_low_level jornada720_pcmcia_ops = {
95 .owner = THIS_MODULE,
96 .hw_init = jornada720_pcmcia_hw_init,
97 .hw_shutdown = sa1111_pcmcia_hw_shutdown,
98 .socket_state = sa1111_pcmcia_socket_state,
99 .configure_socket = jornada720_pcmcia_configure_socket,
101 .socket_init = sa1111_pcmcia_socket_init,
102 .socket_suspend = sa1111_pcmcia_socket_suspend,
105 int __init pcmcia_jornada720_init(struct device *dev)
107 int ret = -ENODEV;
109 if (machine_is_jornada720())
110 ret = sa11xx_drv_pcmcia_probe(dev, &jornada720_pcmcia_ops, 0, 2);
112 return ret;