arm64: dts: Revert "specify console via command line"
[linux/fpc-iii.git] / arch / arm64 / boot / dts / amlogic / meson-gxbb.dtsi
blob0cb40326b0d3fc9251c5ba0c14914dacf277fbf5
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3  * Copyright (c) 2016 Andreas Färber
4  */
6 #include "meson-gx.dtsi"
7 #include <dt-bindings/gpio/meson-gxbb-gpio.h>
8 #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
9 #include <dt-bindings/clock/gxbb-clkc.h>
10 #include <dt-bindings/clock/gxbb-aoclkc.h>
11 #include <dt-bindings/reset/gxbb-aoclkc.h>
13 / {
14         compatible = "amlogic,meson-gxbb";
16         soc {
17                 usb0_phy: phy@c0000000 {
18                         compatible = "amlogic,meson-gxbb-usb2-phy";
19                         #phy-cells = <0>;
20                         reg = <0x0 0xc0000000 0x0 0x20>;
21                         resets = <&reset RESET_USB_OTG>;
22                         clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
23                         clock-names = "usb_general", "usb";
24                         status = "disabled";
25                 };
27                 usb1_phy: phy@c0000020 {
28                         compatible = "amlogic,meson-gxbb-usb2-phy";
29                         #phy-cells = <0>;
30                         reg = <0x0 0xc0000020 0x0 0x20>;
31                         resets = <&reset RESET_USB_OTG>;
32                         clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
33                         clock-names = "usb_general", "usb";
34                         status = "disabled";
35                 };
37                 usb0: usb@c9000000 {
38                         compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
39                         reg = <0x0 0xc9000000 0x0 0x40000>;
40                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
41                         clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
42                         clock-names = "otg";
43                         phys = <&usb0_phy>;
44                         phy-names = "usb2-phy";
45                         dr_mode = "host";
46                         status = "disabled";
47                 };
49                 usb1: usb@c9100000 {
50                         compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
51                         reg = <0x0 0xc9100000 0x0 0x40000>;
52                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
53                         clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
54                         clock-names = "otg";
55                         phys = <&usb1_phy>;
56                         phy-names = "usb2-phy";
57                         dr_mode = "host";
58                         status = "disabled";
59                 };
60         };
63 &aobus {
64         pinctrl_aobus: pinctrl@14 {
65                 compatible = "amlogic,meson-gxbb-aobus-pinctrl";
66                 #address-cells = <2>;
67                 #size-cells = <2>;
68                 ranges;
70                 gpio_ao: bank@14 {
71                         reg = <0x0 0x00014 0x0 0x8>,
72                               <0x0 0x0002c 0x0 0x4>,
73                               <0x0 0x00024 0x0 0x8>;
74                         reg-names = "mux", "pull", "gpio";
75                         gpio-controller;
76                         #gpio-cells = <2>;
77                         gpio-ranges = <&pinctrl_aobus 0 0 14>;
78                 };
80                 uart_ao_a_pins: uart_ao_a {
81                         mux {
82                                 groups = "uart_tx_ao_a", "uart_rx_ao_a";
83                                 function = "uart_ao";
84                                 bias-disable;
85                         };
86                 };
88                 uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
89                         mux {
90                                 groups = "uart_cts_ao_a",
91                                        "uart_rts_ao_a";
92                                 function = "uart_ao";
93                                 bias-disable;
94                         };
95                 };
97                 uart_ao_b_pins: uart_ao_b {
98                         mux {
99                                 groups = "uart_tx_ao_b", "uart_rx_ao_b";
100                                 function = "uart_ao_b";
101                                 bias-disable;
102                         };
103                 };
105                 uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
106                         mux {
107                                 groups = "uart_cts_ao_b",
108                                        "uart_rts_ao_b";
109                                 function = "uart_ao_b";
110                                 bias-disable;
111                         };
112                 };
114                 remote_input_ao_pins: remote_input_ao {
115                         mux {
116                                 groups = "remote_input_ao";
117                                 function = "remote_input_ao";
118                                 bias-disable;
119                         };
120                 };
122                 i2c_ao_pins: i2c_ao {
123                         mux {
124                                 groups = "i2c_sck_ao",
125                                        "i2c_sda_ao";
126                                 function = "i2c_ao";
127                                 bias-disable;
128                         };
129                 };
131                 pwm_ao_a_3_pins: pwm_ao_a_3 {
132                         mux {
133                                 groups = "pwm_ao_a_3";
134                                 function = "pwm_ao_a_3";
135                                 bias-disable;
136                         };
137                 };
139                 pwm_ao_a_6_pins: pwm_ao_a_6 {
140                         mux {
141                                 groups = "pwm_ao_a_6";
142                                 function = "pwm_ao_a_6";
143                                 bias-disable;
144                         };
145                 };
147                 pwm_ao_a_12_pins: pwm_ao_a_12 {
148                         mux {
149                                 groups = "pwm_ao_a_12";
150                                 function = "pwm_ao_a_12";
151                                 bias-disable;
152                         };
153                 };
155                 pwm_ao_b_pins: pwm_ao_b {
156                         mux {
157                                 groups = "pwm_ao_b";
158                                 function = "pwm_ao_b";
159                                 bias-disable;
160                         };
161                 };
163                 i2s_am_clk_pins: i2s_am_clk {
164                         mux {
165                                 groups = "i2s_am_clk";
166                                 function = "i2s_out_ao";
167                                 bias-disable;
168                         };
169                 };
171                 i2s_out_ao_clk_pins: i2s_out_ao_clk {
172                         mux {
173                                 groups = "i2s_out_ao_clk";
174                                 function = "i2s_out_ao";
175                                 bias-disable;
176                         };
177                 };
179                 i2s_out_lr_clk_pins: i2s_out_lr_clk {
180                         mux {
181                                 groups = "i2s_out_lr_clk";
182                                 function = "i2s_out_ao";
183                                 bias-disable;
184                         };
185                 };
187                 i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
188                         mux {
189                                 groups = "i2s_out_ch01_ao";
190                                 function = "i2s_out_ao";
191                                 bias-disable;
192                         };
193                 };
195                 i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
196                         mux {
197                                 groups = "i2s_out_ch23_ao";
198                                 function = "i2s_out_ao";
199                                 bias-disable;
200                         };
201                 };
203                 i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
204                         mux {
205                                 groups = "i2s_out_ch45_ao";
206                                 function = "i2s_out_ao";
207                                 bias-disable;
208                         };
209                 };
211                 spdif_out_ao_6_pins: spdif_out_ao_6 {
212                         mux {
213                                 groups = "spdif_out_ao_6";
214                                 function = "spdif_out_ao";
215                         };
216                 };
218                 spdif_out_ao_13_pins: spdif_out_ao_13 {
219                         mux {
220                                 groups = "spdif_out_ao_13";
221                                 function = "spdif_out_ao";
222                                 bias-disable;
223                         };
224                 };
226                 ao_cec_pins: ao_cec {
227                         mux {
228                                 groups = "ao_cec";
229                                 function = "cec_ao";
230                                 bias-disable;
231                         };
232                 };
234                 ee_cec_pins: ee_cec {
235                         mux {
236                                 groups = "ee_cec";
237                                 function = "cec_ao";
238                                 bias-disable;
239                         };
240                 };
241         };
244 &apb {
245         mali: gpu@c0000 {
246                 compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
247                 reg = <0x0 0xc0000 0x0 0x40000>;
248                 interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
249                              <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
250                              <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
251                              <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
252                              <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
253                              <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
254                              <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
255                              <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
256                              <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
257                              <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
258                 interrupt-names = "gp", "gpmmu", "pp", "pmu",
259                         "pp0", "ppmmu0", "pp1", "ppmmu1",
260                         "pp2", "ppmmu2";
261                 clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
262                 clock-names = "bus", "core";
264                 /*
265                  * Mali clocking is provided by two identical clock paths
266                  * MALI_0 and MALI_1 muxed to a single clock by a glitch
267                  * free mux to safely change frequency while running.
268                  */
269                 assigned-clocks = <&clkc CLKID_GP0_PLL>,
270                                   <&clkc CLKID_MALI_0_SEL>,
271                                   <&clkc CLKID_MALI_0>,
272                                   <&clkc CLKID_MALI>; /* Glitch free mux */
273                 assigned-clock-parents = <0>, /* Do Nothing */
274                                          <&clkc CLKID_GP0_PLL>,
275                                          <0>, /* Do Nothing */
276                                          <&clkc CLKID_MALI_0>;
277                 assigned-clock-rates = <744000000>,
278                                        <0>, /* Do Nothing */
279                                        <744000000>,
280                                        <0>; /* Do Nothing */
281         };
284 &cbus {
285         spifc: spi@8c80 {
286                 compatible = "amlogic,meson-gxbb-spifc";
287                 reg = <0x0 0x08c80 0x0 0x80>;
288                 #address-cells = <1>;
289                 #size-cells = <0>;
290                 clocks = <&clkc CLKID_SPI>;
291                 status = "disabled";
292         };
295 &cec_AO {
296         clocks = <&clkc_AO CLKID_AO_CEC_32K>;
297         clock-names = "core";
300 &clkc_AO {
301         compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
302         clocks = <&xtal>, <&clkc CLKID_CLK81>;
303         clock-names = "xtal", "mpeg-clk";
306 &efuse {
307         clocks = <&clkc CLKID_EFUSE>;
310 &ethmac {
311         clocks = <&clkc CLKID_ETH>,
312                  <&clkc CLKID_FCLK_DIV2>,
313                  <&clkc CLKID_MPLL2>;
314         clock-names = "stmmaceth", "clkin0", "clkin1";
317 &gpio_intc {
318         compatible = "amlogic,meson-gpio-intc",
319                      "amlogic,meson-gxbb-gpio-intc";
320         status = "okay";
323 &hdmi_tx {
324         compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
325         resets = <&reset RESET_HDMITX_CAPB3>,
326                  <&reset RESET_HDMI_SYSTEM_RESET>,
327                  <&reset RESET_HDMI_TX>;
328         reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
329         clocks = <&clkc CLKID_HDMI_PCLK>,
330                  <&clkc CLKID_CLK81>,
331                  <&clkc CLKID_GCLK_VENCI_INT0>;
332         clock-names = "isfr", "iahb", "venci";
335 &sysctrl {
336         clkc: clock-controller {
337                 compatible = "amlogic,gxbb-clkc";
338                 #clock-cells = <1>;
339                 clocks = <&xtal>;
340                 clock-names = "xtal";
341         };
344 &hwrng {
345         clocks = <&clkc CLKID_RNG0>;
346         clock-names = "core";
349 &i2c_A {
350         clocks = <&clkc CLKID_I2C>;
353 &i2c_AO {
354         clocks = <&clkc CLKID_AO_I2C>;
357 &i2c_B {
358         clocks = <&clkc CLKID_I2C>;
361 &i2c_C {
362         clocks = <&clkc CLKID_I2C>;
365 &periphs {
366         pinctrl_periphs: pinctrl@4b0 {
367                 compatible = "amlogic,meson-gxbb-periphs-pinctrl";
368                 #address-cells = <2>;
369                 #size-cells = <2>;
370                 ranges;
372                 gpio: bank@4b0 {
373                         reg = <0x0 0x004b0 0x0 0x28>,
374                               <0x0 0x004e8 0x0 0x14>,
375                               <0x0 0x00520 0x0 0x14>,
376                               <0x0 0x00430 0x0 0x40>;
377                         reg-names = "mux", "pull", "pull-enable", "gpio";
378                         gpio-controller;
379                         #gpio-cells = <2>;
380                         gpio-ranges = <&pinctrl_periphs 0 0 119>;
381                 };
383                 emmc_pins: emmc {
384                         mux-0 {
385                                 groups = "emmc_nand_d07",
386                                        "emmc_cmd";
387                                 function = "emmc";
388                                 bias-pull-up;
389                         };
391                         mux-1 {
392                                 groups = "emmc_clk";
393                                 function = "emmc";
394                                 bias-disable;
395                         };
396                 };
398                 emmc_ds_pins: emmc-ds {
399                         mux {
400                                 groups = "emmc_ds";
401                                 function = "emmc";
402                                 bias-pull-down;
403                         };
404                 };
406                 emmc_clk_gate_pins: emmc_clk_gate {
407                         mux {
408                                 groups = "BOOT_8";
409                                 function = "gpio_periphs";
410                                 bias-pull-down;
411                         };
412                 };
414                 nor_pins: nor {
415                         mux {
416                                 groups = "nor_d",
417                                        "nor_q",
418                                        "nor_c",
419                                        "nor_cs";
420                                 function = "nor";
421                                 bias-disable;
422                         };
423                 };
425                 spi_pins: spi-pins {
426                         mux {
427                                 groups = "spi_miso",
428                                         "spi_mosi",
429                                         "spi_sclk";
430                                 function = "spi";
431                                 bias-disable;
432                         };
433                 };
435                 spi_ss0_pins: spi-ss0 {
436                         mux {
437                                 groups = "spi_ss0";
438                                 function = "spi";
439                                 bias-disable;
440                         };
441                 };
443                 sdcard_pins: sdcard {
444                         mux-0 {
445                                 groups = "sdcard_d0",
446                                        "sdcard_d1",
447                                        "sdcard_d2",
448                                        "sdcard_d3",
449                                        "sdcard_cmd";
450                                 function = "sdcard";
451                                 bias-pull-up;
452                         };
454                         mux-1 {
455                                 groups = "sdcard_clk";
456                                 function = "sdcard";
457                                 bias-disable;
458                         };
459                 };
461                 sdcard_clk_gate_pins: sdcard_clk_gate {
462                         mux {
463                                 groups = "CARD_2";
464                                 function = "gpio_periphs";
465                                 bias-pull-down;
466                         };
467                 };
469                 sdio_pins: sdio {
470                         mux-0 {
471                                 groups = "sdio_d0",
472                                        "sdio_d1",
473                                        "sdio_d2",
474                                        "sdio_d3",
475                                        "sdio_cmd";
476                                 function = "sdio";
477                                 bias-pull-up;
478                         };
480                         mux-1 {
481                                 groups = "sdio_clk";
482                                 function = "sdio";
483                                 bias-disable;
484                         };
485                 };
487                 sdio_clk_gate_pins: sdio_clk_gate {
488                         mux {
489                                 groups = "GPIOX_4";
490                                 function = "gpio_periphs";
491                                 bias-pull-down;
492                         };
493                 };
495                 sdio_irq_pins: sdio_irq {
496                         mux {
497                                 groups = "sdio_irq";
498                                 function = "sdio";
499                                 bias-disable;
500                         };
501                 };
503                 uart_a_pins: uart_a {
504                         mux {
505                                 groups = "uart_tx_a",
506                                        "uart_rx_a";
507                                 function = "uart_a";
508                                 bias-disable;
509                         };
510                 };
512                 uart_a_cts_rts_pins: uart_a_cts_rts {
513                         mux {
514                                 groups = "uart_cts_a",
515                                        "uart_rts_a";
516                                 function = "uart_a";
517                                 bias-disable;
518                         };
519                 };
521                 uart_b_pins: uart_b {
522                         mux {
523                                 groups = "uart_tx_b",
524                                        "uart_rx_b";
525                                 function = "uart_b";
526                                 bias-disable;
527                         };
528                 };
530                 uart_b_cts_rts_pins: uart_b_cts_rts {
531                         mux {
532                                 groups = "uart_cts_b",
533                                        "uart_rts_b";
534                                 function = "uart_b";
535                                 bias-disable;
536                         };
537                 };
539                 uart_c_pins: uart_c {
540                         mux {
541                                 groups = "uart_tx_c",
542                                        "uart_rx_c";
543                                 function = "uart_c";
544                                 bias-disable;
545                         };
546                 };
548                 uart_c_cts_rts_pins: uart_c_cts_rts {
549                         mux {
550                                 groups = "uart_cts_c",
551                                        "uart_rts_c";
552                                 function = "uart_c";
553                                 bias-disable;
554                         };
555                 };
557                 i2c_a_pins: i2c_a {
558                         mux {
559                                 groups = "i2c_sck_a",
560                                        "i2c_sda_a";
561                                 function = "i2c_a";
562                                 bias-disable;
563                         };
564                 };
566                 i2c_b_pins: i2c_b {
567                         mux {
568                                 groups = "i2c_sck_b",
569                                        "i2c_sda_b";
570                                 function = "i2c_b";
571                                 bias-disable;
572                         };
573                 };
575                 i2c_c_pins: i2c_c {
576                         mux {
577                                 groups = "i2c_sck_c",
578                                        "i2c_sda_c";
579                                 function = "i2c_c";
580                                 bias-disable;
581                         };
582                 };
584                 eth_rgmii_pins: eth-rgmii {
585                         mux {
586                                 groups = "eth_mdio",
587                                        "eth_mdc",
588                                        "eth_clk_rx_clk",
589                                        "eth_rx_dv",
590                                        "eth_rxd0",
591                                        "eth_rxd1",
592                                        "eth_rxd2",
593                                        "eth_rxd3",
594                                        "eth_rgmii_tx_clk",
595                                        "eth_tx_en",
596                                        "eth_txd0",
597                                        "eth_txd1",
598                                        "eth_txd2",
599                                        "eth_txd3";
600                                 function = "eth";
601                                 bias-disable;
602                         };
603                 };
605                 eth_rmii_pins: eth-rmii {
606                         mux {
607                                 groups = "eth_mdio",
608                                        "eth_mdc",
609                                        "eth_clk_rx_clk",
610                                        "eth_rx_dv",
611                                        "eth_rxd0",
612                                        "eth_rxd1",
613                                        "eth_tx_en",
614                                        "eth_txd0",
615                                        "eth_txd1";
616                                 function = "eth";
617                                 bias-disable;
618                         };
619                 };
621                 pwm_a_x_pins: pwm_a_x {
622                         mux {
623                                 groups = "pwm_a_x";
624                                 function = "pwm_a_x";
625                                 bias-disable;
626                         };
627                 };
629                 pwm_a_y_pins: pwm_a_y {
630                         mux {
631                                 groups = "pwm_a_y";
632                                 function = "pwm_a_y";
633                                 bias-disable;
634                         };
635                 };
637                 pwm_b_pins: pwm_b {
638                         mux {
639                                 groups = "pwm_b";
640                                 function = "pwm_b";
641                                 bias-disable;
642                         };
643                 };
645                 pwm_d_pins: pwm_d {
646                         mux {
647                                 groups = "pwm_d";
648                                 function = "pwm_d";
649                                 bias-disable;
650                         };
651                 };
653                 pwm_e_pins: pwm_e {
654                         mux {
655                                 groups = "pwm_e";
656                                 function = "pwm_e";
657                                 bias-disable;
658                         };
659                 };
661                 pwm_f_x_pins: pwm_f_x {
662                         mux {
663                                 groups = "pwm_f_x";
664                                 function = "pwm_f_x";
665                                 bias-disable;
666                         };
667                 };
669                 pwm_f_y_pins: pwm_f_y {
670                         mux {
671                                 groups = "pwm_f_y";
672                                 function = "pwm_f_y";
673                                 bias-disable;
674                         };
675                 };
677                 hdmi_hpd_pins: hdmi_hpd {
678                         mux {
679                                 groups = "hdmi_hpd";
680                                 function = "hdmi_hpd";
681                                 bias-disable;
682                         };
683                 };
685                 hdmi_i2c_pins: hdmi_i2c {
686                         mux {
687                                 groups = "hdmi_sda", "hdmi_scl";
688                                 function = "hdmi_i2c";
689                                 bias-disable;
690                         };
691                 };
693                 i2sout_ch23_y_pins: i2sout_ch23_y {
694                         mux {
695                                 groups = "i2sout_ch23_y";
696                                 function = "i2s_out";
697                                 bias-disable;
698                         };
699                 };
701                 i2sout_ch45_y_pins: i2sout_ch45_y {
702                         mux {
703                                 groups = "i2sout_ch45_y";
704                                 function = "i2s_out";
705                                 bias-disable;
706                         };
707                 };
709                 i2sout_ch67_y_pins: i2sout_ch67_y {
710                         mux {
711                                 groups = "i2sout_ch67_y";
712                                 function = "i2s_out";
713                                 bias-disable;
714                         };
715                 };
717                 spdif_out_y_pins: spdif_out_y {
718                         mux {
719                                 groups = "spdif_out_y";
720                                 function = "spdif_out";
721                                 bias-disable;
722                         };
723                 };
724         };
727 &pwrc_vpu {
728         resets = <&reset RESET_VIU>,
729                  <&reset RESET_VENC>,
730                  <&reset RESET_VCBUS>,
731                  <&reset RESET_BT656>,
732                  <&reset RESET_DVIN_RESET>,
733                  <&reset RESET_RDMA>,
734                  <&reset RESET_VENCI>,
735                  <&reset RESET_VENCP>,
736                  <&reset RESET_VDAC>,
737                  <&reset RESET_VDI6>,
738                  <&reset RESET_VENCL>,
739                  <&reset RESET_VID_LOCK>;
740         clocks = <&clkc CLKID_VPU>,
741                  <&clkc CLKID_VAPB>;
742         clock-names = "vpu", "vapb";
743         /*
744          * VPU clocking is provided by two identical clock paths
745          * VPU_0 and VPU_1 muxed to a single clock by a glitch
746          * free mux to safely change frequency while running.
747          * Same for VAPB but with a final gate after the glitch free mux.
748          */
749         assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
750                           <&clkc CLKID_VPU_0>,
751                           <&clkc CLKID_VPU>, /* Glitch free mux */
752                           <&clkc CLKID_VAPB_0_SEL>,
753                           <&clkc CLKID_VAPB_0>,
754                           <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
755         assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
756                                  <0>, /* Do Nothing */
757                                  <&clkc CLKID_VPU_0>,
758                                  <&clkc CLKID_FCLK_DIV4>,
759                                  <0>, /* Do Nothing */
760                                  <&clkc CLKID_VAPB_0>;
761         assigned-clock-rates = <0>, /* Do Nothing */
762                                <666666666>,
763                                <0>, /* Do Nothing */
764                                <0>, /* Do Nothing */
765                                <250000000>,
766                                <0>; /* Do Nothing */
769 &saradc {
770         compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
771         clocks = <&xtal>,
772                  <&clkc CLKID_SAR_ADC>,
773                  <&clkc CLKID_SAR_ADC_CLK>,
774                  <&clkc CLKID_SAR_ADC_SEL>;
775         clock-names = "clkin", "core", "adc_clk", "adc_sel";
778 &sd_emmc_a {
779         clocks = <&clkc CLKID_SD_EMMC_A>,
780                  <&clkc CLKID_SD_EMMC_A_CLK0>,
781                  <&clkc CLKID_FCLK_DIV2>;
782         clock-names = "core", "clkin0", "clkin1";
783         resets = <&reset RESET_SD_EMMC_A>;
786 &sd_emmc_b {
787         clocks = <&clkc CLKID_SD_EMMC_B>,
788                  <&clkc CLKID_SD_EMMC_B_CLK0>,
789                  <&clkc CLKID_FCLK_DIV2>;
790         clock-names = "core", "clkin0", "clkin1";
791         resets = <&reset RESET_SD_EMMC_B>;
794 &sd_emmc_c {
795         clocks = <&clkc CLKID_SD_EMMC_C>,
796                  <&clkc CLKID_SD_EMMC_C_CLK0>,
797                  <&clkc CLKID_FCLK_DIV2>;
798         clock-names = "core", "clkin0", "clkin1";
799         resets = <&reset RESET_SD_EMMC_C>;
802 &simplefb_hdmi {
803         clocks = <&clkc CLKID_HDMI_PCLK>,
804                  <&clkc CLKID_CLK81>,
805                  <&clkc CLKID_GCLK_VENCI_INT0>;
808 &spicc {
809         clocks = <&clkc CLKID_SPICC>;
810         clock-names = "core";
811         resets = <&reset RESET_PERIPHS_SPICC>;
812         num-cs = <1>;
815 &spifc {
816         clocks = <&clkc CLKID_SPI>;
819 &uart_A {
820         clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
821         clock-names = "xtal", "pclk", "baud";
824 &uart_AO {
825         clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
826         clock-names = "xtal", "pclk", "baud";
829 &uart_AO_B {
830         clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
831         clock-names = "xtal", "pclk", "baud";
834 &uart_B {
835         clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
836         clock-names = "xtal", "pclk", "baud";
839 &uart_C {
840         clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
841         clock-names = "xtal", "pclk", "baud";
844 &vpu {
845         compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
846         power-domains = <&pwrc_vpu>;
849 &vdec {
850         compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
851         clocks = <&clkc CLKID_DOS_PARSER>,
852                  <&clkc CLKID_DOS>,
853                  <&clkc CLKID_VDEC_1>,
854                  <&clkc CLKID_VDEC_HEVC>;
855         clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
856         resets = <&reset RESET_PARSER>;
857         reset-names = "esparser";