sh_eth: R8A7740 supports packet shecksumming
[linux/fpc-iii.git] / drivers / media / pci / zoran / zr36050.c
blobe1985609af4bc416a7ba7d6e42f7dd872461ad9e
1 /*
2 * Zoran ZR36050 basic configuration functions
4 * Copyright (C) 2001 Wolfgang Scherr <scherr@net4you.at>
6 * $Id: zr36050.c,v 1.1.2.11 2003/08/03 14:54:53 rbultje Exp $
8 * ------------------------------------------------------------------------
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 * ------------------------------------------------------------------------
27 #define ZR050_VERSION "v0.7.1"
29 #include <linux/module.h>
30 #include <linux/init.h>
31 #include <linux/slab.h>
32 #include <linux/delay.h>
34 #include <linux/types.h>
35 #include <linux/wait.h>
37 /* I/O commands, error codes */
38 #include <asm/io.h>
40 /* headerfile of this module */
41 #include "zr36050.h"
43 /* codec io API */
44 #include "videocodec.h"
46 /* it doesn't make sense to have more than 20 or so,
47 just to prevent some unwanted loops */
48 #define MAX_CODECS 20
50 /* amount of chips attached via this driver */
51 static int zr36050_codecs;
53 /* debugging is available via module parameter */
54 static int debug;
55 module_param(debug, int, 0);
56 MODULE_PARM_DESC(debug, "Debug level (0-4)");
58 #define dprintk(num, format, args...) \
59 do { \
60 if (debug >= num) \
61 printk(format, ##args); \
62 } while (0)
64 /* =========================================================================
65 Local hardware I/O functions:
67 read/write via codec layer (registers are located in the master device)
68 ========================================================================= */
70 /* read and write functions */
71 static u8
72 zr36050_read (struct zr36050 *ptr,
73 u16 reg)
75 u8 value = 0;
77 // just in case something is wrong...
78 if (ptr->codec->master_data->readreg)
79 value = (ptr->codec->master_data->readreg(ptr->codec,
80 reg)) & 0xFF;
81 else
82 dprintk(1,
83 KERN_ERR "%s: invalid I/O setup, nothing read!\n",
84 ptr->name);
86 dprintk(4, "%s: reading from 0x%04x: %02x\n", ptr->name, reg,
87 value);
89 return value;
92 static void
93 zr36050_write (struct zr36050 *ptr,
94 u16 reg,
95 u8 value)
97 dprintk(4, "%s: writing 0x%02x to 0x%04x\n", ptr->name, value,
98 reg);
100 // just in case something is wrong...
101 if (ptr->codec->master_data->writereg)
102 ptr->codec->master_data->writereg(ptr->codec, reg, value);
103 else
104 dprintk(1,
105 KERN_ERR
106 "%s: invalid I/O setup, nothing written!\n",
107 ptr->name);
110 /* =========================================================================
111 Local helper function:
113 status read
114 ========================================================================= */
116 /* status is kept in datastructure */
117 static u8
118 zr36050_read_status1 (struct zr36050 *ptr)
120 ptr->status1 = zr36050_read(ptr, ZR050_STATUS_1);
122 zr36050_read(ptr, 0);
123 return ptr->status1;
126 /* =========================================================================
127 Local helper function:
129 scale factor read
130 ========================================================================= */
132 /* scale factor is kept in datastructure */
133 static u16
134 zr36050_read_scalefactor (struct zr36050 *ptr)
136 ptr->scalefact = (zr36050_read(ptr, ZR050_SF_HI) << 8) |
137 (zr36050_read(ptr, ZR050_SF_LO) & 0xFF);
139 /* leave 0 selected for an eventually GO from master */
140 zr36050_read(ptr, 0);
141 return ptr->scalefact;
144 /* =========================================================================
145 Local helper function:
147 wait if codec is ready to proceed (end of processing) or time is over
148 ========================================================================= */
150 static void
151 zr36050_wait_end (struct zr36050 *ptr)
153 int i = 0;
155 while (!(zr36050_read_status1(ptr) & 0x4)) {
156 udelay(1);
157 if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
158 dprintk(1,
159 "%s: timeout at wait_end (last status: 0x%02x)\n",
160 ptr->name, ptr->status1);
161 break;
166 /* =========================================================================
167 Local helper function:
169 basic test of "connectivity", writes/reads to/from memory the SOF marker
170 ========================================================================= */
172 static int
173 zr36050_basic_test (struct zr36050 *ptr)
175 zr36050_write(ptr, ZR050_SOF_IDX, 0x00);
176 zr36050_write(ptr, ZR050_SOF_IDX + 1, 0x00);
177 if ((zr36050_read(ptr, ZR050_SOF_IDX) |
178 zr36050_read(ptr, ZR050_SOF_IDX + 1)) != 0x0000) {
179 dprintk(1,
180 KERN_ERR
181 "%s: attach failed, can't connect to jpeg processor!\n",
182 ptr->name);
183 return -ENXIO;
185 zr36050_write(ptr, ZR050_SOF_IDX, 0xff);
186 zr36050_write(ptr, ZR050_SOF_IDX + 1, 0xc0);
187 if (((zr36050_read(ptr, ZR050_SOF_IDX) << 8) |
188 zr36050_read(ptr, ZR050_SOF_IDX + 1)) != 0xffc0) {
189 dprintk(1,
190 KERN_ERR
191 "%s: attach failed, can't connect to jpeg processor!\n",
192 ptr->name);
193 return -ENXIO;
196 zr36050_wait_end(ptr);
197 if ((ptr->status1 & 0x4) == 0) {
198 dprintk(1,
199 KERN_ERR
200 "%s: attach failed, jpeg processor failed (end flag)!\n",
201 ptr->name);
202 return -EBUSY;
205 return 0; /* looks good! */
208 /* =========================================================================
209 Local helper function:
211 simple loop for pushing the init datasets
212 ========================================================================= */
214 static int
215 zr36050_pushit (struct zr36050 *ptr,
216 u16 startreg,
217 u16 len,
218 const char *data)
220 int i = 0;
222 dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", ptr->name,
223 startreg, len);
224 while (i < len) {
225 zr36050_write(ptr, startreg++, data[i++]);
228 return i;
231 /* =========================================================================
232 Basic datasets:
234 jpeg baseline setup data (you find it on lots places in internet, or just
235 extract it from any regular .jpg image...)
237 Could be variable, but until it's not needed it they are just fixed to save
238 memory. Otherwise expand zr36050 structure with arrays, push the values to
239 it and initialize from there, as e.g. the linux zr36057/60 driver does it.
240 ========================================================================= */
242 static const char zr36050_dqt[0x86] = {
243 0xff, 0xdb, //Marker: DQT
244 0x00, 0x84, //Length: 2*65+2
245 0x00, //Pq,Tq first table
246 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e,
247 0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28,
248 0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25,
249 0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33,
250 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44,
251 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57,
252 0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71,
253 0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63,
254 0x01, //Pq,Tq second table
255 0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a,
256 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63,
257 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
258 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
259 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
260 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
261 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
262 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63
265 static const char zr36050_dht[0x1a4] = {
266 0xff, 0xc4, //Marker: DHT
267 0x01, 0xa2, //Length: 2*AC, 2*DC
268 0x00, //DC first table
269 0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01,
270 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
271 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
272 0x01, //DC second table
273 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
274 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
275 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
276 0x10, //AC first table
277 0x00, 0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03,
278 0x05, 0x05, 0x04, 0x04, 0x00, 0x00,
279 0x01, 0x7D, 0x01, 0x02, 0x03, 0x00, 0x04, 0x11,
280 0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61,
281 0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1,
282 0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24,
283 0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17,
284 0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34,
285 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44,
286 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56,
287 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66,
288 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
289 0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88,
290 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99,
291 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8,
292 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9,
293 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8,
294 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9,
295 0xDA, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
296 0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7,
297 0xF8, 0xF9, 0xFA,
298 0x11, //AC second table
299 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04,
300 0x07, 0x05, 0x04, 0x04, 0x00, 0x01,
301 0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04,
302 0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71,
303 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91,
304 0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62,
305 0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25,
306 0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, 0x28, 0x29, 0x2A,
307 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44,
308 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56,
309 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66,
310 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
311 0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
312 0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98,
313 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7,
314 0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8,
315 0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7,
316 0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8,
317 0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
318 0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8,
319 0xF9, 0xFA
322 /* jpeg baseline setup, this is just fixed in this driver (YUV pictures) */
323 #define NO_OF_COMPONENTS 0x3 //Y,U,V
324 #define BASELINE_PRECISION 0x8 //MCU size (?)
325 static const char zr36050_tq[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's QT
326 static const char zr36050_td[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's DC
327 static const char zr36050_ta[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's AC
329 /* horizontal 422 decimation setup (maybe we support 411 or so later, too) */
330 static const char zr36050_decimation_h[8] = { 2, 1, 1, 0, 0, 0, 0, 0 };
331 static const char zr36050_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 };
333 /* =========================================================================
334 Local helper functions:
336 calculation and setup of parameter-dependent JPEG baseline segments
337 (needed for compression only)
338 ========================================================================= */
340 /* ------------------------------------------------------------------------- */
342 /* SOF (start of frame) segment depends on width, height and sampling ratio
343 of each color component */
345 static int
346 zr36050_set_sof (struct zr36050 *ptr)
348 char sof_data[34]; // max. size of register set
349 int i;
351 dprintk(3, "%s: write SOF (%dx%d, %d components)\n", ptr->name,
352 ptr->width, ptr->height, NO_OF_COMPONENTS);
353 sof_data[0] = 0xff;
354 sof_data[1] = 0xc0;
355 sof_data[2] = 0x00;
356 sof_data[3] = (3 * NO_OF_COMPONENTS) + 8;
357 sof_data[4] = BASELINE_PRECISION; // only '8' possible with zr36050
358 sof_data[5] = (ptr->height) >> 8;
359 sof_data[6] = (ptr->height) & 0xff;
360 sof_data[7] = (ptr->width) >> 8;
361 sof_data[8] = (ptr->width) & 0xff;
362 sof_data[9] = NO_OF_COMPONENTS;
363 for (i = 0; i < NO_OF_COMPONENTS; i++) {
364 sof_data[10 + (i * 3)] = i; // index identifier
365 sof_data[11 + (i * 3)] = (ptr->h_samp_ratio[i] << 4) | (ptr->v_samp_ratio[i]); // sampling ratios
366 sof_data[12 + (i * 3)] = zr36050_tq[i]; // Q table selection
368 return zr36050_pushit(ptr, ZR050_SOF_IDX,
369 (3 * NO_OF_COMPONENTS) + 10, sof_data);
372 /* ------------------------------------------------------------------------- */
374 /* SOS (start of scan) segment depends on the used scan components
375 of each color component */
377 static int
378 zr36050_set_sos (struct zr36050 *ptr)
380 char sos_data[16]; // max. size of register set
381 int i;
383 dprintk(3, "%s: write SOS\n", ptr->name);
384 sos_data[0] = 0xff;
385 sos_data[1] = 0xda;
386 sos_data[2] = 0x00;
387 sos_data[3] = 2 + 1 + (2 * NO_OF_COMPONENTS) + 3;
388 sos_data[4] = NO_OF_COMPONENTS;
389 for (i = 0; i < NO_OF_COMPONENTS; i++) {
390 sos_data[5 + (i * 2)] = i; // index
391 sos_data[6 + (i * 2)] = (zr36050_td[i] << 4) | zr36050_ta[i]; // AC/DC tbl.sel.
393 sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00; // scan start
394 sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3F;
395 sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 4] = 00;
396 return zr36050_pushit(ptr, ZR050_SOS1_IDX,
397 4 + 1 + (2 * NO_OF_COMPONENTS) + 3,
398 sos_data);
401 /* ------------------------------------------------------------------------- */
403 /* DRI (define restart interval) */
405 static int
406 zr36050_set_dri (struct zr36050 *ptr)
408 char dri_data[6]; // max. size of register set
410 dprintk(3, "%s: write DRI\n", ptr->name);
411 dri_data[0] = 0xff;
412 dri_data[1] = 0xdd;
413 dri_data[2] = 0x00;
414 dri_data[3] = 0x04;
415 dri_data[4] = ptr->dri >> 8;
416 dri_data[5] = ptr->dri & 0xff;
417 return zr36050_pushit(ptr, ZR050_DRI_IDX, 6, dri_data);
420 /* =========================================================================
421 Setup function:
423 Setup compression/decompression of Zoran's JPEG processor
424 ( see also zoran 36050 manual )
426 ... sorry for the spaghetti code ...
427 ========================================================================= */
428 static void
429 zr36050_init (struct zr36050 *ptr)
431 int sum = 0;
432 long bitcnt, tmp;
434 if (ptr->mode == CODEC_DO_COMPRESSION) {
435 dprintk(2, "%s: COMPRESSION SETUP\n", ptr->name);
437 /* 050 communicates with 057 in master mode */
438 zr36050_write(ptr, ZR050_HARDWARE, ZR050_HW_MSTR);
440 /* encoding table preload for compression */
441 zr36050_write(ptr, ZR050_MODE,
442 ZR050_MO_COMP | ZR050_MO_TLM);
443 zr36050_write(ptr, ZR050_OPTIONS, 0);
445 /* disable all IRQs */
446 zr36050_write(ptr, ZR050_INT_REQ_0, 0);
447 zr36050_write(ptr, ZR050_INT_REQ_1, 3); // low 2 bits always 1
449 /* volume control settings */
450 /*zr36050_write(ptr, ZR050_MBCV, ptr->max_block_vol);*/
451 zr36050_write(ptr, ZR050_SF_HI, ptr->scalefact >> 8);
452 zr36050_write(ptr, ZR050_SF_LO, ptr->scalefact & 0xff);
454 zr36050_write(ptr, ZR050_AF_HI, 0xff);
455 zr36050_write(ptr, ZR050_AF_M, 0xff);
456 zr36050_write(ptr, ZR050_AF_LO, 0xff);
458 /* setup the variable jpeg tables */
459 sum += zr36050_set_sof(ptr);
460 sum += zr36050_set_sos(ptr);
461 sum += zr36050_set_dri(ptr);
463 /* setup the fixed jpeg tables - maybe variable, though -
464 * (see table init section above) */
465 dprintk(3, "%s: write DQT, DHT, APP\n", ptr->name);
466 sum += zr36050_pushit(ptr, ZR050_DQT_IDX,
467 sizeof(zr36050_dqt), zr36050_dqt);
468 sum += zr36050_pushit(ptr, ZR050_DHT_IDX,
469 sizeof(zr36050_dht), zr36050_dht);
470 zr36050_write(ptr, ZR050_APP_IDX, 0xff);
471 zr36050_write(ptr, ZR050_APP_IDX + 1, 0xe0 + ptr->app.appn);
472 zr36050_write(ptr, ZR050_APP_IDX + 2, 0x00);
473 zr36050_write(ptr, ZR050_APP_IDX + 3, ptr->app.len + 2);
474 sum += zr36050_pushit(ptr, ZR050_APP_IDX + 4, 60,
475 ptr->app.data) + 4;
476 zr36050_write(ptr, ZR050_COM_IDX, 0xff);
477 zr36050_write(ptr, ZR050_COM_IDX + 1, 0xfe);
478 zr36050_write(ptr, ZR050_COM_IDX + 2, 0x00);
479 zr36050_write(ptr, ZR050_COM_IDX + 3, ptr->com.len + 2);
480 sum += zr36050_pushit(ptr, ZR050_COM_IDX + 4, 60,
481 ptr->com.data) + 4;
483 /* do the internal huffman table preload */
484 zr36050_write(ptr, ZR050_MARKERS_EN, ZR050_ME_DHTI);
486 zr36050_write(ptr, ZR050_GO, 1); // launch codec
487 zr36050_wait_end(ptr);
488 dprintk(2, "%s: Status after table preload: 0x%02x\n",
489 ptr->name, ptr->status1);
491 if ((ptr->status1 & 0x4) == 0) {
492 dprintk(1, KERN_ERR "%s: init aborted!\n",
493 ptr->name);
494 return; // something is wrong, its timed out!!!!
497 /* setup misc. data for compression (target code sizes) */
499 /* size of compressed code to reach without header data */
500 sum = ptr->real_code_vol - sum;
501 bitcnt = sum << 3; /* need the size in bits */
503 tmp = bitcnt >> 16;
504 dprintk(3,
505 "%s: code: csize=%d, tot=%d, bit=%ld, highbits=%ld\n",
506 ptr->name, sum, ptr->real_code_vol, bitcnt, tmp);
507 zr36050_write(ptr, ZR050_TCV_NET_HI, tmp >> 8);
508 zr36050_write(ptr, ZR050_TCV_NET_MH, tmp & 0xff);
509 tmp = bitcnt & 0xffff;
510 zr36050_write(ptr, ZR050_TCV_NET_ML, tmp >> 8);
511 zr36050_write(ptr, ZR050_TCV_NET_LO, tmp & 0xff);
513 bitcnt -= bitcnt >> 7; // bits without stuffing
514 bitcnt -= ((bitcnt * 5) >> 6); // bits without eob
516 tmp = bitcnt >> 16;
517 dprintk(3, "%s: code: nettobit=%ld, highnettobits=%ld\n",
518 ptr->name, bitcnt, tmp);
519 zr36050_write(ptr, ZR050_TCV_DATA_HI, tmp >> 8);
520 zr36050_write(ptr, ZR050_TCV_DATA_MH, tmp & 0xff);
521 tmp = bitcnt & 0xffff;
522 zr36050_write(ptr, ZR050_TCV_DATA_ML, tmp >> 8);
523 zr36050_write(ptr, ZR050_TCV_DATA_LO, tmp & 0xff);
525 /* compression setup with or without bitrate control */
526 zr36050_write(ptr, ZR050_MODE,
527 ZR050_MO_COMP | ZR050_MO_PASS2 |
528 (ptr->bitrate_ctrl ? ZR050_MO_BRC : 0));
530 /* this headers seem to deliver "valid AVI" jpeg frames */
531 zr36050_write(ptr, ZR050_MARKERS_EN,
532 ZR050_ME_DQT | ZR050_ME_DHT |
533 ((ptr->app.len > 0) ? ZR050_ME_APP : 0) |
534 ((ptr->com.len > 0) ? ZR050_ME_COM : 0));
535 } else {
536 dprintk(2, "%s: EXPANSION SETUP\n", ptr->name);
538 /* 050 communicates with 055 in master mode */
539 zr36050_write(ptr, ZR050_HARDWARE,
540 ZR050_HW_MSTR | ZR050_HW_CFIS_2_CLK);
542 /* encoding table preload */
543 zr36050_write(ptr, ZR050_MODE, ZR050_MO_TLM);
545 /* disable all IRQs */
546 zr36050_write(ptr, ZR050_INT_REQ_0, 0);
547 zr36050_write(ptr, ZR050_INT_REQ_1, 3); // low 2 bits always 1
549 dprintk(3, "%s: write DHT\n", ptr->name);
550 zr36050_pushit(ptr, ZR050_DHT_IDX, sizeof(zr36050_dht),
551 zr36050_dht);
553 /* do the internal huffman table preload */
554 zr36050_write(ptr, ZR050_MARKERS_EN, ZR050_ME_DHTI);
556 zr36050_write(ptr, ZR050_GO, 1); // launch codec
557 zr36050_wait_end(ptr);
558 dprintk(2, "%s: Status after table preload: 0x%02x\n",
559 ptr->name, ptr->status1);
561 if ((ptr->status1 & 0x4) == 0) {
562 dprintk(1, KERN_ERR "%s: init aborted!\n",
563 ptr->name);
564 return; // something is wrong, its timed out!!!!
567 /* setup misc. data for expansion */
568 zr36050_write(ptr, ZR050_MODE, 0);
569 zr36050_write(ptr, ZR050_MARKERS_EN, 0);
572 /* adr on selected, to allow GO from master */
573 zr36050_read(ptr, 0);
576 /* =========================================================================
577 CODEC API FUNCTIONS
579 this functions are accessed by the master via the API structure
580 ========================================================================= */
582 /* set compression/expansion mode and launches codec -
583 this should be the last call from the master before starting processing */
584 static int
585 zr36050_set_mode (struct videocodec *codec,
586 int mode)
588 struct zr36050 *ptr = (struct zr36050 *) codec->data;
590 dprintk(2, "%s: set_mode %d call\n", ptr->name, mode);
592 if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION))
593 return -EINVAL;
595 ptr->mode = mode;
596 zr36050_init(ptr);
598 return 0;
601 /* set picture size (norm is ignored as the codec doesn't know about it) */
602 static int
603 zr36050_set_video (struct videocodec *codec,
604 struct tvnorm *norm,
605 struct vfe_settings *cap,
606 struct vfe_polarity *pol)
608 struct zr36050 *ptr = (struct zr36050 *) codec->data;
609 int size;
611 dprintk(2, "%s: set_video %d.%d, %d/%d-%dx%d (0x%x) q%d call\n",
612 ptr->name, norm->HStart, norm->VStart,
613 cap->x, cap->y, cap->width, cap->height,
614 cap->decimation, cap->quality);
615 /* if () return -EINVAL;
616 * trust the master driver that it knows what it does - so
617 * we allow invalid startx/y and norm for now ... */
618 ptr->width = cap->width / (cap->decimation & 0xff);
619 ptr->height = cap->height / ((cap->decimation >> 8) & 0xff);
621 /* (KM) JPEG quality */
622 size = ptr->width * ptr->height;
623 size *= 16; /* size in bits */
624 /* apply quality setting */
625 size = size * cap->quality / 200;
627 /* Minimum: 1kb */
628 if (size < 8192)
629 size = 8192;
630 /* Maximum: 7/8 of code buffer */
631 if (size > ptr->total_code_vol * 7)
632 size = ptr->total_code_vol * 7;
634 ptr->real_code_vol = size >> 3; /* in bytes */
636 /* Set max_block_vol here (previously in zr36050_init, moved
637 * here for consistency with zr36060 code */
638 zr36050_write(ptr, ZR050_MBCV, ptr->max_block_vol);
640 return 0;
643 /* additional control functions */
644 static int
645 zr36050_control (struct videocodec *codec,
646 int type,
647 int size,
648 void *data)
650 struct zr36050 *ptr = (struct zr36050 *) codec->data;
651 int *ival = (int *) data;
653 dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type,
654 size);
656 switch (type) {
657 case CODEC_G_STATUS: /* get last status */
658 if (size != sizeof(int))
659 return -EFAULT;
660 zr36050_read_status1(ptr);
661 *ival = ptr->status1;
662 break;
664 case CODEC_G_CODEC_MODE:
665 if (size != sizeof(int))
666 return -EFAULT;
667 *ival = CODEC_MODE_BJPG;
668 break;
670 case CODEC_S_CODEC_MODE:
671 if (size != sizeof(int))
672 return -EFAULT;
673 if (*ival != CODEC_MODE_BJPG)
674 return -EINVAL;
675 /* not needed, do nothing */
676 return 0;
678 case CODEC_G_VFE:
679 case CODEC_S_VFE:
680 /* not needed, do nothing */
681 return 0;
683 case CODEC_S_MMAP:
684 /* not available, give an error */
685 return -ENXIO;
687 case CODEC_G_JPEG_TDS_BYTE: /* get target volume in byte */
688 if (size != sizeof(int))
689 return -EFAULT;
690 *ival = ptr->total_code_vol;
691 break;
693 case CODEC_S_JPEG_TDS_BYTE: /* get target volume in byte */
694 if (size != sizeof(int))
695 return -EFAULT;
696 ptr->total_code_vol = *ival;
697 /* (Kieran Morrissey)
698 * code copied from zr36060.c to ensure proper bitrate */
699 ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3;
700 break;
702 case CODEC_G_JPEG_SCALE: /* get scaling factor */
703 if (size != sizeof(int))
704 return -EFAULT;
705 *ival = zr36050_read_scalefactor(ptr);
706 break;
708 case CODEC_S_JPEG_SCALE: /* set scaling factor */
709 if (size != sizeof(int))
710 return -EFAULT;
711 ptr->scalefact = *ival;
712 break;
714 case CODEC_G_JPEG_APP_DATA: { /* get appn marker data */
715 struct jpeg_app_marker *app = data;
717 if (size != sizeof(struct jpeg_app_marker))
718 return -EFAULT;
720 *app = ptr->app;
721 break;
724 case CODEC_S_JPEG_APP_DATA: { /* set appn marker data */
725 struct jpeg_app_marker *app = data;
727 if (size != sizeof(struct jpeg_app_marker))
728 return -EFAULT;
730 ptr->app = *app;
731 break;
734 case CODEC_G_JPEG_COM_DATA: { /* get comment marker data */
735 struct jpeg_com_marker *com = data;
737 if (size != sizeof(struct jpeg_com_marker))
738 return -EFAULT;
740 *com = ptr->com;
741 break;
744 case CODEC_S_JPEG_COM_DATA: { /* set comment marker data */
745 struct jpeg_com_marker *com = data;
747 if (size != sizeof(struct jpeg_com_marker))
748 return -EFAULT;
750 ptr->com = *com;
751 break;
754 default:
755 return -EINVAL;
758 return size;
761 /* =========================================================================
762 Exit and unregister function:
764 Deinitializes Zoran's JPEG processor
765 ========================================================================= */
767 static int
768 zr36050_unset (struct videocodec *codec)
770 struct zr36050 *ptr = codec->data;
772 if (ptr) {
773 /* do wee need some codec deinit here, too ???? */
775 dprintk(1, "%s: finished codec #%d\n", ptr->name,
776 ptr->num);
777 kfree(ptr);
778 codec->data = NULL;
780 zr36050_codecs--;
781 return 0;
784 return -EFAULT;
787 /* =========================================================================
788 Setup and registry function:
790 Initializes Zoran's JPEG processor
792 Also sets pixel size, average code size, mode (compr./decompr.)
793 (the given size is determined by the processor with the video interface)
794 ========================================================================= */
796 static int
797 zr36050_setup (struct videocodec *codec)
799 struct zr36050 *ptr;
800 int res;
802 dprintk(2, "zr36050: initializing MJPEG subsystem #%d.\n",
803 zr36050_codecs);
805 if (zr36050_codecs == MAX_CODECS) {
806 dprintk(1,
807 KERN_ERR "zr36050: Can't attach more codecs!\n");
808 return -ENOSPC;
810 //mem structure init
811 codec->data = ptr = kzalloc(sizeof(struct zr36050), GFP_KERNEL);
812 if (NULL == ptr) {
813 dprintk(1, KERN_ERR "zr36050: Can't get enough memory!\n");
814 return -ENOMEM;
817 snprintf(ptr->name, sizeof(ptr->name), "zr36050[%d]",
818 zr36050_codecs);
819 ptr->num = zr36050_codecs++;
820 ptr->codec = codec;
822 //testing
823 res = zr36050_basic_test(ptr);
824 if (res < 0) {
825 zr36050_unset(codec);
826 return res;
828 //final setup
829 memcpy(ptr->h_samp_ratio, zr36050_decimation_h, 8);
830 memcpy(ptr->v_samp_ratio, zr36050_decimation_v, 8);
832 ptr->bitrate_ctrl = 0; /* 0 or 1 - fixed file size flag
833 * (what is the difference?) */
834 ptr->mode = CODEC_DO_COMPRESSION;
835 ptr->width = 384;
836 ptr->height = 288;
837 ptr->total_code_vol = 16000;
838 ptr->max_block_vol = 240;
839 ptr->scalefact = 0x100;
840 ptr->dri = 1;
842 /* no app/com marker by default */
843 ptr->app.appn = 0;
844 ptr->app.len = 0;
845 ptr->com.len = 0;
847 zr36050_init(ptr);
849 dprintk(1, KERN_INFO "%s: codec attached and running\n",
850 ptr->name);
852 return 0;
855 static const struct videocodec zr36050_codec = {
856 .owner = THIS_MODULE,
857 .name = "zr36050",
858 .magic = 0L, // magic not used
859 .flags =
860 CODEC_FLAG_JPEG | CODEC_FLAG_HARDWARE | CODEC_FLAG_ENCODER |
861 CODEC_FLAG_DECODER,
862 .type = CODEC_TYPE_ZR36050,
863 .setup = zr36050_setup, // functionality
864 .unset = zr36050_unset,
865 .set_mode = zr36050_set_mode,
866 .set_video = zr36050_set_video,
867 .control = zr36050_control,
868 // others are not used
871 /* =========================================================================
872 HOOK IN DRIVER AS KERNEL MODULE
873 ========================================================================= */
875 static int __init
876 zr36050_init_module (void)
878 //dprintk(1, "ZR36050 driver %s\n",ZR050_VERSION);
879 zr36050_codecs = 0;
880 return videocodec_register(&zr36050_codec);
883 static void __exit
884 zr36050_cleanup_module (void)
886 if (zr36050_codecs) {
887 dprintk(1,
888 "zr36050: something's wrong - %d codecs left somehow.\n",
889 zr36050_codecs);
891 videocodec_unregister(&zr36050_codec);
894 module_init(zr36050_init_module);
895 module_exit(zr36050_cleanup_module);
897 MODULE_AUTHOR("Wolfgang Scherr <scherr@net4you.at>");
898 MODULE_DESCRIPTION("Driver module for ZR36050 jpeg processors "
899 ZR050_VERSION);
900 MODULE_LICENSE("GPL");