ixgbevf: Fix checksum error when using stacked vlan
[linux/fpc-iii.git] / sound / soc / blackfin / bf5xx-ad73311.c
blob786bbdd96e7c4b9d6144128ebe63497a23a66e3b
1 /*
2 * File: sound/soc/blackfin/bf5xx-ad73311.c
3 * Author: Cliff Cai <Cliff.Cai@analog.com>
5 * Created: Thur Sep 25 2008
6 * Description: Board driver for ad73311 sound chip
8 * Modified:
9 * Copyright 2008 Analog Devices Inc.
11 * Bugs: Enter bugs at http://blackfin.uclinux.org/
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, see the file COPYING, or write
25 * to the Free Software Foundation, Inc.,
26 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
29 #include <linux/module.h>
30 #include <linux/moduleparam.h>
31 #include <linux/device.h>
32 #include <linux/delay.h>
33 #include <linux/gpio.h>
35 #include <sound/core.h>
36 #include <sound/pcm.h>
37 #include <sound/soc.h>
38 #include <sound/pcm_params.h>
40 #include <asm/blackfin.h>
41 #include <asm/cacheflush.h>
42 #include <asm/irq.h>
43 #include <asm/dma.h>
44 #include <asm/portmux.h>
46 #include "../codecs/ad73311.h"
47 #include "bf5xx-sport.h"
49 #if CONFIG_SND_BF5XX_SPORT_NUM == 0
50 #define bfin_write_SPORT_TCR1 bfin_write_SPORT0_TCR1
51 #define bfin_read_SPORT_TCR1 bfin_read_SPORT0_TCR1
52 #define bfin_write_SPORT_TCR2 bfin_write_SPORT0_TCR2
53 #define bfin_write_SPORT_TX16 bfin_write_SPORT0_TX16
54 #define bfin_read_SPORT_STAT bfin_read_SPORT0_STAT
55 #else
56 #define bfin_write_SPORT_TCR1 bfin_write_SPORT1_TCR1
57 #define bfin_read_SPORT_TCR1 bfin_read_SPORT1_TCR1
58 #define bfin_write_SPORT_TCR2 bfin_write_SPORT1_TCR2
59 #define bfin_write_SPORT_TX16 bfin_write_SPORT1_TX16
60 #define bfin_read_SPORT_STAT bfin_read_SPORT1_STAT
61 #endif
63 #define GPIO_SE CONFIG_SND_BFIN_AD73311_SE
65 static struct snd_soc_card bf5xx_ad73311;
67 static int snd_ad73311_startup(void)
69 pr_debug("%s enter\n", __func__);
71 /* Pull up SE pin on AD73311L */
72 gpio_set_value(GPIO_SE, 1);
73 return 0;
76 static int snd_ad73311_configure(void)
78 unsigned short ctrl_regs[6];
79 unsigned short status = 0;
80 int count = 0;
82 /* DMCLK = MCLK = 16.384 MHz
83 * SCLK = DMCLK/8 = 2.048 MHz
84 * Sample Rate = DMCLK/2048 = 8 KHz
86 ctrl_regs[0] = AD_CONTROL | AD_WRITE | CTRL_REG_B | REGB_MCDIV(0) | \
87 REGB_SCDIV(0) | REGB_DIRATE(0);
88 ctrl_regs[1] = AD_CONTROL | AD_WRITE | CTRL_REG_C | REGC_PUDEV | \
89 REGC_PUADC | REGC_PUDAC | REGC_PUREF | REGC_REFUSE ;
90 ctrl_regs[2] = AD_CONTROL | AD_WRITE | CTRL_REG_D | REGD_OGS(2) | \
91 REGD_IGS(2);
92 ctrl_regs[3] = AD_CONTROL | AD_WRITE | CTRL_REG_E | REGE_DA(0x1f);
93 ctrl_regs[4] = AD_CONTROL | AD_WRITE | CTRL_REG_F | REGF_SEEN ;
94 ctrl_regs[5] = AD_CONTROL | AD_WRITE | CTRL_REG_A | REGA_MODE_DATA;
96 local_irq_disable();
97 snd_ad73311_startup();
98 udelay(1);
100 bfin_write_SPORT_TCR1(TFSR);
101 bfin_write_SPORT_TCR2(0xF);
102 SSYNC();
104 /* SPORT Tx Register is a 8 x 16 FIFO, all the data can be put to
105 * FIFO before enable SPORT to transfer the data
107 for (count = 0; count < 6; count++)
108 bfin_write_SPORT_TX16(ctrl_regs[count]);
109 SSYNC();
110 bfin_write_SPORT_TCR1(bfin_read_SPORT_TCR1() | TSPEN);
111 SSYNC();
113 /* When TUVF is set, the data is already send out */
114 while (!(status & TUVF) && ++count < 10000) {
115 udelay(1);
116 status = bfin_read_SPORT_STAT();
117 SSYNC();
119 bfin_write_SPORT_TCR1(bfin_read_SPORT_TCR1() & ~TSPEN);
120 SSYNC();
121 local_irq_enable();
123 if (count >= 10000) {
124 printk(KERN_ERR "ad73311: failed to configure codec\n");
125 return -1;
127 return 0;
130 static int bf5xx_probe(struct snd_soc_card *card)
132 int err;
133 if (gpio_request(GPIO_SE, "AD73311_SE")) {
134 printk(KERN_ERR "%s: Failed ro request GPIO_%d\n", __func__, GPIO_SE);
135 return -EBUSY;
138 gpio_direction_output(GPIO_SE, 0);
140 err = snd_ad73311_configure();
141 if (err < 0)
142 return -EFAULT;
144 return 0;
147 #define BF5XX_AD7311_DAI_FMT (SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF | \
148 SND_SOC_DAIFMT_CBM_CFM)
150 static struct snd_soc_dai_link bf5xx_ad73311_dai[] = {
152 .name = "ad73311",
153 .stream_name = "AD73311",
154 .cpu_dai_name = "bfin-i2s.0",
155 .codec_dai_name = "ad73311-hifi",
156 .platform_name = "bfin-i2s-pcm-audio",
157 .codec_name = "ad73311",
158 .dai_fmt = BF5XX_AD7311_DAI_FMT,
161 .name = "ad73311",
162 .stream_name = "AD73311",
163 .cpu_dai_name = "bfin-i2s.1",
164 .codec_dai_name = "ad73311-hifi",
165 .platform_name = "bfin-i2s-pcm-audio",
166 .codec_name = "ad73311",
167 .dai_fmt = BF5XX_AD7311_DAI_FMT,
171 static struct snd_soc_card bf5xx_ad73311 = {
172 .name = "bfin-ad73311",
173 .owner = THIS_MODULE,
174 .probe = bf5xx_probe,
175 .dai_link = &bf5xx_ad73311_dai[CONFIG_SND_BF5XX_SPORT_NUM],
176 .num_links = 1,
179 static struct platform_device *bf5xx_ad73311_snd_device;
181 static int __init bf5xx_ad73311_init(void)
183 int ret;
185 pr_debug("%s enter\n", __func__);
186 bf5xx_ad73311_snd_device = platform_device_alloc("soc-audio", -1);
187 if (!bf5xx_ad73311_snd_device)
188 return -ENOMEM;
190 platform_set_drvdata(bf5xx_ad73311_snd_device, &bf5xx_ad73311);
191 ret = platform_device_add(bf5xx_ad73311_snd_device);
193 if (ret)
194 platform_device_put(bf5xx_ad73311_snd_device);
196 return ret;
199 static void __exit bf5xx_ad73311_exit(void)
201 pr_debug("%s enter\n", __func__);
202 platform_device_unregister(bf5xx_ad73311_snd_device);
205 module_init(bf5xx_ad73311_init);
206 module_exit(bf5xx_ad73311_exit);
208 /* Module information */
209 MODULE_AUTHOR("Cliff Cai");
210 MODULE_DESCRIPTION("ALSA SoC AD73311 Blackfin");
211 MODULE_LICENSE("GPL");