5 * In contrary to the Amiga and Atari platforms, the Mac hardware seems to
6 * exclusively use the autovector interrupts (the 'generic level0-level7'
7 * interrupts with exception vectors 0x19-0x1f). The following interrupt levels
10 * - slot 0: one second interrupt (CA2)
11 * - slot 1: VBlank (CA1)
12 * - slot 2: ADB data ready (SR full)
13 * - slot 3: ADB data (CB2)
14 * - slot 4: ADB clock (CB1)
17 * - slot 7: status of IRQ; signals 'any enabled int.'
20 * - slot 0: SCSI DRQ (CA2)
21 * - slot 1: NUBUS IRQ (CA1) need to read port A to find which
22 * - slot 2: /EXP IRQ (only on IIci)
23 * - slot 3: SCSI IRQ (CB2)
24 * - slot 4: ASC IRQ (CB1)
25 * - slot 5: timer 2 (not on IIci)
26 * - slot 6: timer 1 (not on IIci)
27 * - slot 7: status of IRQ; signals 'any enabled int.'
29 * Levels 3-6 vary by machine type. For VIA or RBV Macintoshes:
36 * [serial errors or special conditions seem to raise level 6
37 * interrupts on some models (LC4xx?)]
41 * Machines with Quadra-like VIA hardware, except PSC and PMU machines, support
42 * an alternate interrupt mapping, as used by A/UX. It spreads ethernet and
43 * sound out to their own autovector IRQs and gives VIA1 a higher priority:
49 * 5 - Apple Sound Chip (ASC)
53 * For OSS Macintoshes (IIfx only), we apply an interrupt mapping similar to
54 * the Quadra (A/UX) mapping:
66 * For PSC Macintoshes (660AV, 840AV):
72 * - slot 1: SCC channel A interrupt
73 * - slot 2: SCC channel B interrupt
80 * Finally we have good 'ole level 7, the non-maskable interrupt:
82 * 7 - NMI (programmer's switch on the back of some Macs)
83 * Also RAM parity error on models which support it (IIc, IIfx?)
85 * The current interrupt logic looks something like this:
87 * - We install dispatchers for the autovector interrupts (1-7). These
88 * dispatchers are responsible for querying the hardware (the
89 * VIA/RBV/OSS/PSC chips) to determine the actual interrupt source. Using
90 * this information a machspec interrupt number is generated by placing the
91 * index of the interrupt hardware into the low three bits and the original
92 * autovector interrupt number in the upper 5 bits. The handlers for the
93 * resulting machspec interrupt are then called.
95 * - Nubus is a special case because its interrupts are hidden behind two
96 * layers of hardware. Nubus interrupts come in as index 1 on VIA #2,
97 * which translates to IRQ number 17. In this spot we install _another_
98 * dispatcher. This dispatcher finds the interrupting slot number (9-F) and
99 * then forms a new machspec interrupt number as above with the slot number
100 * minus 9 in the low three bits and the pseudo-level 7 in the upper five
101 * bits. The handlers for this new machspec interrupt number are then
102 * called. This puts Nubus interrupts into the range 56-62.
104 * - The Baboon interrupts (used on some PowerBooks) are an even more special
105 * case. They're hidden behind the Nubus slot $C interrupt thus adding a
106 * third layer of indirection. Why oh why did the Apple engineers do that?
110 #include <linux/types.h>
111 #include <linux/kernel.h>
112 #include <linux/sched.h>
113 #include <linux/interrupt.h>
114 #include <linux/irq.h>
115 #include <linux/delay.h>
118 #include <asm/macintosh.h>
119 #include <asm/macints.h>
120 #include <asm/mac_via.h>
121 #include <asm/mac_psc.h>
122 #include <asm/mac_oss.h>
123 #include <asm/mac_iop.h>
124 #include <asm/mac_baboon.h>
125 #include <asm/hwtest.h>
126 #include <asm/irq_regs.h>
131 * console_loglevel determines NMI handler function
134 irqreturn_t
mac_nmi_handler(int, void *);
135 irqreturn_t
mac_debug_handler(int, void *);
137 /* #define DEBUG_MACINTS */
139 static unsigned int mac_irq_startup(struct irq_data
*);
140 static void mac_irq_shutdown(struct irq_data
*);
142 static struct irq_chip mac_irq_chip
= {
144 .irq_enable
= mac_irq_enable
,
145 .irq_disable
= mac_irq_disable
,
146 .irq_startup
= mac_irq_startup
,
147 .irq_shutdown
= mac_irq_shutdown
,
150 void __init
mac_init_IRQ(void)
153 printk("mac_init_IRQ(): Setting things up...\n");
155 m68k_setup_irq_controller(&mac_irq_chip
, handle_simple_irq
, IRQ_USER
,
156 NUM_MAC_SOURCES
- IRQ_USER
);
157 /* Make sure the SONIC interrupt is cleared or things get ugly */
159 printk("Killing onboard sonic... ");
160 /* This address should hopefully be mapped already */
161 if (hwreg_present((void*)(0x50f0a000))) {
162 *(long *)(0x50f0a014) = 0x7fffL
;
163 *(long *)(0x50f0a010) = 0L;
166 #endif /* SHUTUP_SONIC */
169 * Now register the handlers for the master IRQ handlers
170 * at levels 1-7. Most of the work is done elsewhere.
174 oss_register_interrupts();
176 via_register_interrupts();
178 psc_register_interrupts();
180 baboon_register_interrupts();
181 iop_register_interrupts();
182 if (request_irq(IRQ_AUTO_7
, mac_nmi_handler
, 0, "NMI",
184 pr_err("Couldn't register NMI\n");
186 printk("mac_init_IRQ(): Done!\n");
191 * mac_irq_enable - enable an interrupt source
192 * mac_irq_disable - disable an interrupt source
194 * These routines are just dispatchers to the VIA/OSS/PSC routines.
197 void mac_irq_enable(struct irq_data
*data
)
200 int irq_src
= IRQ_SRC(irq
);
217 else if (oss_present
)
222 baboon_irq_enable(irq
);
227 void mac_irq_disable(struct irq_data
*data
)
230 int irq_src
= IRQ_SRC(irq
);
237 oss_irq_disable(irq
);
239 via_irq_disable(irq
);
246 psc_irq_disable(irq
);
247 else if (oss_present
)
248 oss_irq_disable(irq
);
252 baboon_irq_disable(irq
);
257 static unsigned int mac_irq_startup(struct irq_data
*data
)
261 if (IRQ_SRC(irq
) == 7 && !oss_present
)
262 via_nubus_irq_startup(irq
);
264 mac_irq_enable(data
);
269 static void mac_irq_shutdown(struct irq_data
*data
)
273 if (IRQ_SRC(irq
) == 7 && !oss_present
)
274 via_nubus_irq_shutdown(irq
);
276 mac_irq_disable(data
);
279 static int num_debug
[8];
281 irqreturn_t
mac_debug_handler(int irq
, void *dev_id
)
283 if (num_debug
[irq
] < 10) {
284 printk("DEBUG: Unexpected IRQ %d\n", irq
);
291 static volatile int nmi_hold
;
293 irqreturn_t
mac_nmi_handler(int irq
, void *dev_id
)
297 * generate debug output on NMI switch if 'debug' kernel option given
298 * (only works with Penguin!)
302 for (i
=0; i
<100; i
++)
307 printk("... pausing, press NMI to resume ...");
315 while (nmi_hold
== 1)
318 if (console_loglevel
>= 8) {
320 struct pt_regs
*fp
= get_irq_regs();
322 printk("PC: %08lx\nSR: %04x SP: %p\n", fp
->pc
, fp
->sr
, fp
);
323 printk("d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n",
324 fp
->d0
, fp
->d1
, fp
->d2
, fp
->d3
);
325 printk("d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n",
326 fp
->d4
, fp
->d5
, fp
->a0
, fp
->a1
);
328 if (STACK_MAGIC
!= *(unsigned long *)current
->kernel_stack_page
)
329 printk("Corrupted stack page\n");
330 printk("Process %s (pid: %d, stackpage=%08lx)\n",
331 current
->comm
, current
->pid
, current
->kernel_stack_page
);
333 dump_stack((struct frame
*)fp
);
335 /* printk("NMI "); */