x86, microcode, AMD: Fix signedness bug in generic_load_microcode()
[linux/fpc-iii.git] / drivers / scsi / arm / acornscsi.h
blob8d2172a0b3518305622db0fda8d39503db46ece2
1 /*
2 * linux/drivers/acorn/scsi/acornscsi.h
4 * Copyright (C) 1997 Russell King
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * Acorn SCSI driver
12 #ifndef ACORNSCSI_H
13 #define ACORNSCSI_H
15 /* SBIC registers */
16 #define SBIC_OWNID 0
17 #define OWNID_FS1 (1<<7)
18 #define OWNID_FS2 (1<<6)
19 #define OWNID_EHP (1<<4)
20 #define OWNID_EAF (1<<3)
22 #define SBIC_CTRL 1
23 #define CTRL_DMAMODE (1<<7)
24 #define CTRL_DMADBAMODE (1<<6)
25 #define CTRL_DMABURST (1<<5)
26 #define CTRL_DMAPOLLED 0
27 #define CTRL_HHP (1<<4)
28 #define CTRL_EDI (1<<3)
29 #define CTRL_IDI (1<<2)
30 #define CTRL_HA (1<<1)
31 #define CTRL_HSP (1<<0)
33 #define SBIC_TIMEOUT 2
34 #define SBIC_TOTSECTS 3
35 #define SBIC_TOTHEADS 4
36 #define SBIC_TOTCYLH 5
37 #define SBIC_TOTCYLL 6
38 #define SBIC_LOGADDRH 7
39 #define SBIC_LOGADDRM2 8
40 #define SBIC_LOGADDRM1 9
41 #define SBIC_LOGADDRL 10
42 #define SBIC_SECTORNUM 11
43 #define SBIC_HEADNUM 12
44 #define SBIC_CYLH 13
45 #define SBIC_CYLL 14
46 #define SBIC_TARGETLUN 15
47 #define TARGETLUN_TLV (1<<7)
48 #define TARGETLUN_DOK (1<<6)
50 #define SBIC_CMNDPHASE 16
51 #define SBIC_SYNCHTRANSFER 17
52 #define SYNCHTRANSFER_OF0 0x00
53 #define SYNCHTRANSFER_OF1 0x01
54 #define SYNCHTRANSFER_OF2 0x02
55 #define SYNCHTRANSFER_OF3 0x03
56 #define SYNCHTRANSFER_OF4 0x04
57 #define SYNCHTRANSFER_OF5 0x05
58 #define SYNCHTRANSFER_OF6 0x06
59 #define SYNCHTRANSFER_OF7 0x07
60 #define SYNCHTRANSFER_OF8 0x08
61 #define SYNCHTRANSFER_OF9 0x09
62 #define SYNCHTRANSFER_OF10 0x0A
63 #define SYNCHTRANSFER_OF11 0x0B
64 #define SYNCHTRANSFER_OF12 0x0C
65 #define SYNCHTRANSFER_8DBA 0x00
66 #define SYNCHTRANSFER_2DBA 0x20
67 #define SYNCHTRANSFER_3DBA 0x30
68 #define SYNCHTRANSFER_4DBA 0x40
69 #define SYNCHTRANSFER_5DBA 0x50
70 #define SYNCHTRANSFER_6DBA 0x60
71 #define SYNCHTRANSFER_7DBA 0x70
73 #define SBIC_TRANSCNTH 18
74 #define SBIC_TRANSCNTM 19
75 #define SBIC_TRANSCNTL 20
76 #define SBIC_DESTID 21
77 #define DESTID_SCC (1<<7)
78 #define DESTID_DPD (1<<6)
80 #define SBIC_SOURCEID 22
81 #define SOURCEID_ER (1<<7)
82 #define SOURCEID_ES (1<<6)
83 #define SOURCEID_DSP (1<<5)
84 #define SOURCEID_SIV (1<<4)
86 #define SBIC_SSR 23
87 #define SBIC_CMND 24
88 #define CMND_RESET 0x00
89 #define CMND_ABORT 0x01
90 #define CMND_ASSERTATN 0x02
91 #define CMND_NEGATEACK 0x03
92 #define CMND_DISCONNECT 0x04
93 #define CMND_RESELECT 0x05
94 #define CMND_SELWITHATN 0x06
95 #define CMND_SELECT 0x07
96 #define CMND_SELECTATNTRANSFER 0x08
97 #define CMND_SELECTTRANSFER 0x09
98 #define CMND_RESELECTRXDATA 0x0A
99 #define CMND_RESELECTTXDATA 0x0B
100 #define CMND_WAITFORSELRECV 0x0C
101 #define CMND_SENDSTATCMD 0x0D
102 #define CMND_SENDDISCONNECT 0x0E
103 #define CMND_SETIDI 0x0F
104 #define CMND_RECEIVECMD 0x10
105 #define CMND_RECEIVEDTA 0x11
106 #define CMND_RECEIVEMSG 0x12
107 #define CMND_RECEIVEUSP 0x13
108 #define CMND_SENDCMD 0x14
109 #define CMND_SENDDATA 0x15
110 #define CMND_SENDMSG 0x16
111 #define CMND_SENDUSP 0x17
112 #define CMND_TRANSLATEADDR 0x18
113 #define CMND_XFERINFO 0x20
114 #define CMND_SBT (1<<7)
116 #define SBIC_DATA 25
117 #define SBIC_ASR 26
118 #define ASR_INT (1<<7)
119 #define ASR_LCI (1<<6)
120 #define ASR_BSY (1<<5)
121 #define ASR_CIP (1<<4)
122 #define ASR_PE (1<<1)
123 #define ASR_DBR (1<<0)
125 /* DMAC registers */
126 #define DMAC_INIT 0x00
127 #define INIT_8BIT (1)
129 #define DMAC_CHANNEL 0x80
130 #define CHANNEL_0 0x00
131 #define CHANNEL_1 0x01
132 #define CHANNEL_2 0x02
133 #define CHANNEL_3 0x03
135 #define DMAC_TXCNTLO 0x01
136 #define DMAC_TXCNTHI 0x81
137 #define DMAC_TXADRLO 0x02
138 #define DMAC_TXADRMD 0x82
139 #define DMAC_TXADRHI 0x03
141 #define DMAC_DEVCON0 0x04
142 #define DEVCON0_AKL (1<<7)
143 #define DEVCON0_RQL (1<<6)
144 #define DEVCON0_EXW (1<<5)
145 #define DEVCON0_ROT (1<<4)
146 #define DEVCON0_CMP (1<<3)
147 #define DEVCON0_DDMA (1<<2)
148 #define DEVCON0_AHLD (1<<1)
149 #define DEVCON0_MTM (1<<0)
151 #define DMAC_DEVCON1 0x84
152 #define DEVCON1_WEV (1<<1)
153 #define DEVCON1_BHLD (1<<0)
155 #define DMAC_MODECON 0x05
156 #define MODECON_WOED 0x01
157 #define MODECON_VERIFY 0x00
158 #define MODECON_READ 0x04
159 #define MODECON_WRITE 0x08
160 #define MODECON_AUTOINIT 0x10
161 #define MODECON_ADDRDIR 0x20
162 #define MODECON_DEMAND 0x00
163 #define MODECON_SINGLE 0x40
164 #define MODECON_BLOCK 0x80
165 #define MODECON_CASCADE 0xC0
167 #define DMAC_STATUS 0x85
168 #define STATUS_TC0 (1<<0)
169 #define STATUS_RQ0 (1<<4)
171 #define DMAC_TEMPLO 0x06
172 #define DMAC_TEMPHI 0x86
173 #define DMAC_REQREG 0x07
174 #define DMAC_MASKREG 0x87
175 #define MASKREG_M0 0x01
176 #define MASKREG_M1 0x02
177 #define MASKREG_M2 0x04
178 #define MASKREG_M3 0x08
180 /* miscellaneous internal variables */
182 #define MASK_ON (MASKREG_M3|MASKREG_M2|MASKREG_M1|MASKREG_M0)
183 #define MASK_OFF (MASKREG_M3|MASKREG_M2|MASKREG_M1)
186 * SCSI driver phases
188 typedef enum {
189 PHASE_IDLE, /* we're not planning on doing anything */
190 PHASE_CONNECTING, /* connecting to a target */
191 PHASE_CONNECTED, /* connected to a target */
192 PHASE_MSGOUT, /* message out to device */
193 PHASE_RECONNECTED, /* reconnected */
194 PHASE_COMMANDPAUSED, /* command partly sent */
195 PHASE_COMMAND, /* command all sent */
196 PHASE_DATAOUT, /* data out to device */
197 PHASE_DATAIN, /* data in from device */
198 PHASE_STATUSIN, /* status in from device */
199 PHASE_MSGIN, /* message in from device */
200 PHASE_DONE, /* finished */
201 PHASE_ABORTED, /* aborted */
202 PHASE_DISCONNECT, /* disconnecting */
203 } phase_t;
206 * After interrupt, what to do now
208 typedef enum {
209 INTR_IDLE, /* not expecting another IRQ */
210 INTR_NEXT_COMMAND, /* start next command */
211 INTR_PROCESSING, /* interrupt routine still processing */
212 } intr_ret_t;
215 * DMA direction
217 typedef enum {
218 DMA_OUT, /* DMA from memory to chip */
219 DMA_IN /* DMA from chip to memory */
220 } dmadir_t;
223 * Synchronous transfer state
225 typedef enum { /* Synchronous transfer state */
226 SYNC_ASYNCHRONOUS, /* don't negociate synchronous transfers*/
227 SYNC_NEGOCIATE, /* start negociation */
228 SYNC_SENT_REQUEST, /* sent SDTR message */
229 SYNC_COMPLETED, /* received SDTR reply */
230 } syncxfer_t;
233 * Command type
235 typedef enum { /* command type */
236 CMD_READ, /* READ_6, READ_10, READ_12 */
237 CMD_WRITE, /* WRITE_6, WRITE_10, WRITE_12 */
238 CMD_MISC, /* Others */
239 } cmdtype_t;
242 * Data phase direction
244 typedef enum { /* Data direction */
245 DATADIR_IN, /* Data in phase expected */
246 DATADIR_OUT /* Data out phase expected */
247 } datadir_t;
249 #include "queue.h"
250 #include "msgqueue.h"
252 #define STATUS_BUFFER_SIZE 32
254 * This is used to dump the previous states of the SBIC
256 struct status_entry {
257 unsigned long when;
258 unsigned char ssr;
259 unsigned char ph;
260 unsigned char irq;
261 unsigned char unused;
264 #define ADD_STATUS(_q,_ssr,_ph,_irq) \
265 ({ \
266 host->status[(_q)][host->status_ptr[(_q)]].when = jiffies; \
267 host->status[(_q)][host->status_ptr[(_q)]].ssr = (_ssr); \
268 host->status[(_q)][host->status_ptr[(_q)]].ph = (_ph); \
269 host->status[(_q)][host->status_ptr[(_q)]].irq = (_irq); \
270 host->status_ptr[(_q)] = (host->status_ptr[(_q)] + 1) & (STATUS_BUFFER_SIZE - 1); \
274 * AcornSCSI host specific data
276 typedef struct acornscsi_hostdata {
277 /* miscellaneous */
278 struct Scsi_Host *host; /* host */
279 struct scsi_cmnd *SCpnt; /* currently processing command */
280 struct scsi_cmnd *origSCpnt; /* original connecting command */
281 void __iomem *base; /* memc base address */
282 void __iomem *fast; /* fast ioc base address */
284 /* driver information */
285 struct {
286 unsigned int irq; /* interrupt */
287 phase_t phase; /* current phase */
289 struct {
290 unsigned char target; /* reconnected target */
291 unsigned char lun; /* reconnected lun */
292 unsigned char tag; /* reconnected tag */
293 } reconnected;
295 struct scsi_pointer SCp; /* current commands data pointer */
297 MsgQueue_t msgs;
299 unsigned short last_message; /* last message to be sent */
300 unsigned char disconnectable:1; /* this command can be disconnected */
301 } scsi;
303 /* statistics information */
304 struct {
305 unsigned int queues;
306 unsigned int removes;
307 unsigned int fins;
308 unsigned int reads;
309 unsigned int writes;
310 unsigned int miscs;
311 unsigned int disconnects;
312 unsigned int aborts;
313 unsigned int resets;
314 } stats;
316 /* queue handling */
317 struct {
318 Queue_t issue; /* issue queue */
319 Queue_t disconnected; /* disconnected command queue */
320 } queues;
322 /* per-device info */
323 struct {
324 unsigned char sync_xfer; /* synchronous transfer (SBIC value) */
325 syncxfer_t sync_state; /* sync xfer negociation state */
326 unsigned char disconnect_ok:1; /* device can disconnect */
327 } device[8];
328 unsigned long busyluns[64 / sizeof(unsigned long)];/* array of bits indicating LUNs busy */
330 /* DMA info */
331 struct {
332 unsigned int free_addr; /* next free address */
333 unsigned int start_addr; /* start address of current transfer */
334 dmadir_t direction; /* dma direction */
335 unsigned int transferred; /* number of bytes transferred */
336 unsigned int xfer_start; /* scheduled DMA transfer start */
337 unsigned int xfer_length; /* scheduled DMA transfer length */
338 char *xfer_ptr; /* pointer to area */
339 unsigned char xfer_required:1; /* set if we need to transfer something */
340 unsigned char xfer_setup:1; /* set if DMA is setup */
341 unsigned char xfer_done:1; /* set if DMA reached end of BH list */
342 } dma;
344 /* card info */
345 struct {
346 unsigned char page_reg; /* current setting of page reg */
347 } card;
349 unsigned char status_ptr[9];
350 struct status_entry status[9][STATUS_BUFFER_SIZE];
351 } AS_Host;
353 #endif /* ACORNSCSI_H */