arch/powerpc/platforms/40x/ep405.c

   1 /*
   2  * Architecture- / platform-specific boot-time initialization code for
   3  * IBM PowerPC 4xx based boards. Adapted from original
   4  * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
   5  * <dan@net4x.com>.
   6  *
   7  * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
   8  *
   9  * Rewritten and ported to the merged powerpc tree:
  10  * Copyright 2007 IBM Corporation
  11  * Josh Boyer <jwboyer@linux.vnet.ibm.com>
  12  *
  13  * Adapted to EP405 by Ben. Herrenschmidt <benh@kernel.crashing.org>
  14  *
  15  * TODO: Wire up the PCI IRQ mux and the southbridge interrupts
  16  *
  17  * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
  18  * the terms of the GNU General Public License version 2.  This program
  19  * is licensed "as is" without any warranty of any kind, whether express
  20  * or implied.
  21  */
  22
  23 #include <linux/init.h>
  24 #include <linux/of_platform.h>
  25
  26 #include <asm/machdep.h>
  27 #include <asm/prom.h>
  28 #include <asm/udbg.h>
  29 #include <asm/time.h>
  30 #include <asm/uic.h>
  31 #include <asm/pci-bridge.h>
  32 #include <asm/ppc4xx.h>
  33
  34 static struct device_node *bcsr_node;
  35 static void __iomem *bcsr_regs;
  36
  37 /* BCSR registers  */
  38 #define BCSR_ID                 0
  39 #define BCSR_PCI_CTRL           1
  40 #define BCSR_FLASH_NV_POR_CTRL  2
  41 #define BCSR_FENET_UART_CTRL    3
  42 #define BCSR_PCI_IRQ            4
  43 #define BCSR_XIRQ_SELECT        5
  44 #define BCSR_XIRQ_ROUTING       6
  45 #define BCSR_XIRQ_STATUS        7
  46 #define BCSR_XIRQ_STATUS2       8
  47 #define BCSR_SW_STAT_LED_CTRL   9
  48 #define BCSR_GPIO_IRQ_PAR_CTRL  10
  49 /* there's more, can't be bothered typing them tho */
  50
  51
  52 static const struct of_device_id ep405_of_bus[] __initconst = {
  53         { .compatible = "ibm,plb3", },
  54         { .compatible = "ibm,opb", },
  55         { .compatible = "ibm,ebc", },
  56         {},
  57 };
  58
  59 static int __init ep405_device_probe(void)
  60 {
  61         of_platform_bus_probe(NULL, ep405_of_bus, NULL);
  62
  63         return 0;
  64 }
  65 machine_device_initcall(ep405, ep405_device_probe);
  66
  67 static void __init ep405_init_bcsr(void)
  68 {
  69         const u8 *irq_routing;
  70         int i;
  71
  72         /* Find the bloody thing & map it */
  73         bcsr_node = of_find_compatible_node(NULL, NULL, "ep405-bcsr");
  74         if (bcsr_node == NULL) {
  75                 printk(KERN_ERR "EP405 BCSR not found !\n");
  76                 return;
  77         }
  78         bcsr_regs = of_iomap(bcsr_node, 0);
  79         if (bcsr_regs == NULL) {
  80                 printk(KERN_ERR "EP405 BCSR failed to map !\n");
  81                 return;
  82         }
  83
  84         /* Get the irq-routing property and apply the routing to the CPLD */
  85         irq_routing = of_get_property(bcsr_node, "irq-routing", NULL);
  86         if (irq_routing == NULL)
  87                 return;
  88         for (i = 0; i < 16; i++) {
  89                 u8 irq = irq_routing[i];
  90                 out_8(bcsr_regs + BCSR_XIRQ_SELECT, i);
  91                 out_8(bcsr_regs + BCSR_XIRQ_ROUTING, irq);
  92         }
  93         in_8(bcsr_regs + BCSR_XIRQ_SELECT);
  94         mb();
  95         out_8(bcsr_regs + BCSR_GPIO_IRQ_PAR_CTRL, 0xfe);
  96 }
  97
  98 static void __init ep405_setup_arch(void)
  99 {
 100         /* Find & init the BCSR CPLD */
 101         ep405_init_bcsr();
 102
 103         pci_set_flags(PCI_REASSIGN_ALL_RSRC);
 104 }
 105
 106 static int __init ep405_probe(void)
 107 {
 108         if (!of_machine_is_compatible("ep405"))
 109                 return 0;
 110
 111         return 1;
 112 }
 113
 114 define_machine(ep405) {
 115         .name                   = "EP405",
 116         .probe                  = ep405_probe,
 117         .setup_arch             = ep405_setup_arch,
 118         .progress               = udbg_progress,
 119         .init_IRQ               = uic_init_tree,
 120         .get_irq                = uic_get_irq,
 121         .restart                = ppc4xx_reset_system,
 122         .calibrate_decr         = generic_calibrate_decr,
 123 };