1 /* Texas Instruments TMP102 SMBus temperature sensor driver
3 * Copyright (C) 2010 Steven King <sfking@fdwdc.com>
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
16 #include <linux/delay.h>
17 #include <linux/module.h>
18 #include <linux/init.h>
19 #include <linux/slab.h>
20 #include <linux/i2c.h>
21 #include <linux/hwmon.h>
22 #include <linux/hwmon-sysfs.h>
23 #include <linux/err.h>
24 #include <linux/mutex.h>
25 #include <linux/device.h>
26 #include <linux/jiffies.h>
27 #include <linux/regmap.h>
30 #define DRIVER_NAME "tmp102"
32 #define TMP102_TEMP_REG 0x00
33 #define TMP102_CONF_REG 0x01
34 /* note: these bit definitions are byte swapped */
35 #define TMP102_CONF_SD 0x0100
36 #define TMP102_CONF_TM 0x0200
37 #define TMP102_CONF_POL 0x0400
38 #define TMP102_CONF_F0 0x0800
39 #define TMP102_CONF_F1 0x1000
40 #define TMP102_CONF_R0 0x2000
41 #define TMP102_CONF_R1 0x4000
42 #define TMP102_CONF_OS 0x8000
43 #define TMP102_CONF_EM 0x0010
44 #define TMP102_CONF_AL 0x0020
45 #define TMP102_CONF_CR0 0x0040
46 #define TMP102_CONF_CR1 0x0080
47 #define TMP102_TLOW_REG 0x02
48 #define TMP102_THIGH_REG 0x03
50 #define TMP102_CONFREG_MASK (TMP102_CONF_SD | TMP102_CONF_TM | \
51 TMP102_CONF_POL | TMP102_CONF_F0 | \
52 TMP102_CONF_F1 | TMP102_CONF_OS | \
53 TMP102_CONF_EM | TMP102_CONF_AL | \
54 TMP102_CONF_CR0 | TMP102_CONF_CR1)
56 #define TMP102_CONFIG_CLEAR (TMP102_CONF_SD | TMP102_CONF_OS | \
58 #define TMP102_CONFIG_SET (TMP102_CONF_TM | TMP102_CONF_EM | \
61 #define CONVERSION_TIME_MS 35 /* in milli-seconds */
64 struct regmap
*regmap
;
66 unsigned long ready_time
;
69 /* convert left adjusted 13-bit TMP102 register value to milliCelsius */
70 static inline int tmp102_reg_to_mC(s16 val
)
72 return ((val
& ~0x01) * 1000) / 128;
75 /* convert milliCelsius to left adjusted 13-bit TMP102 register value */
76 static inline u16
tmp102_mC_to_reg(int val
)
78 return (val
* 128) / 1000;
81 static int tmp102_read(struct device
*dev
, enum hwmon_sensor_types type
,
82 u32 attr
, int channel
, long *temp
)
84 struct tmp102
*tmp102
= dev_get_drvdata(dev
);
89 case hwmon_temp_input
:
90 /* Is it too early to return a conversion ? */
91 if (time_before(jiffies
, tmp102
->ready_time
)) {
92 dev_dbg(dev
, "%s: Conversion not ready yet..\n", __func__
);
95 reg
= TMP102_TEMP_REG
;
97 case hwmon_temp_max_hyst
:
98 reg
= TMP102_TLOW_REG
;
101 reg
= TMP102_THIGH_REG
;
107 err
= regmap_read(tmp102
->regmap
, reg
, ®val
);
110 *temp
= tmp102_reg_to_mC(regval
);
115 static int tmp102_write(struct device
*dev
, enum hwmon_sensor_types type
,
116 u32 attr
, int channel
, long temp
)
118 struct tmp102
*tmp102
= dev_get_drvdata(dev
);
122 case hwmon_temp_max_hyst
:
123 reg
= TMP102_TLOW_REG
;
126 reg
= TMP102_THIGH_REG
;
132 temp
= clamp_val(temp
, -256000, 255000);
133 return regmap_write(tmp102
->regmap
, reg
, tmp102_mC_to_reg(temp
));
136 static umode_t
tmp102_is_visible(const void *data
, enum hwmon_sensor_types type
,
137 u32 attr
, int channel
)
139 if (type
!= hwmon_temp
)
143 case hwmon_temp_input
:
145 case hwmon_temp_max_hyst
:
147 return S_IRUGO
| S_IWUSR
;
153 static u32 tmp102_chip_config
[] = {
158 static const struct hwmon_channel_info tmp102_chip
= {
160 .config
= tmp102_chip_config
,
163 static u32 tmp102_temp_config
[] = {
164 HWMON_T_INPUT
| HWMON_T_MAX
| HWMON_T_MAX_HYST
,
168 static const struct hwmon_channel_info tmp102_temp
= {
170 .config
= tmp102_temp_config
,
173 static const struct hwmon_channel_info
*tmp102_info
[] = {
179 static const struct hwmon_ops tmp102_hwmon_ops
= {
180 .is_visible
= tmp102_is_visible
,
182 .write
= tmp102_write
,
185 static const struct hwmon_chip_info tmp102_chip_info
= {
186 .ops
= &tmp102_hwmon_ops
,
190 static void tmp102_restore_config(void *data
)
192 struct tmp102
*tmp102
= data
;
194 regmap_write(tmp102
->regmap
, TMP102_CONF_REG
, tmp102
->config_orig
);
197 static bool tmp102_is_writeable_reg(struct device
*dev
, unsigned int reg
)
199 return reg
!= TMP102_TEMP_REG
;
202 static bool tmp102_is_volatile_reg(struct device
*dev
, unsigned int reg
)
204 return reg
== TMP102_TEMP_REG
;
207 static const struct regmap_config tmp102_regmap_config
= {
210 .max_register
= TMP102_THIGH_REG
,
211 .writeable_reg
= tmp102_is_writeable_reg
,
212 .volatile_reg
= tmp102_is_volatile_reg
,
213 .val_format_endian
= REGMAP_ENDIAN_BIG
,
214 .cache_type
= REGCACHE_RBTREE
,
215 .use_single_rw
= true,
218 static int tmp102_probe(struct i2c_client
*client
,
219 const struct i2c_device_id
*id
)
221 struct device
*dev
= &client
->dev
;
222 struct device
*hwmon_dev
;
223 struct tmp102
*tmp102
;
227 if (!i2c_check_functionality(client
->adapter
,
228 I2C_FUNC_SMBUS_WORD_DATA
)) {
230 "adapter doesn't support SMBus word transactions\n");
234 tmp102
= devm_kzalloc(dev
, sizeof(*tmp102
), GFP_KERNEL
);
238 i2c_set_clientdata(client
, tmp102
);
240 tmp102
->regmap
= devm_regmap_init_i2c(client
, &tmp102_regmap_config
);
241 if (IS_ERR(tmp102
->regmap
))
242 return PTR_ERR(tmp102
->regmap
);
244 err
= regmap_read(tmp102
->regmap
, TMP102_CONF_REG
, ®val
);
246 dev_err(dev
, "error reading config register\n");
250 if ((regval
& ~TMP102_CONFREG_MASK
) !=
251 (TMP102_CONF_R0
| TMP102_CONF_R1
)) {
252 dev_err(dev
, "unexpected config register value\n");
256 tmp102
->config_orig
= regval
;
258 err
= devm_add_action_or_reset(dev
, tmp102_restore_config
, tmp102
);
262 regval
&= ~TMP102_CONFIG_CLEAR
;
263 regval
|= TMP102_CONFIG_SET
;
265 err
= regmap_write(tmp102
->regmap
, TMP102_CONF_REG
, regval
);
267 dev_err(dev
, "error writing config register\n");
271 tmp102
->ready_time
= jiffies
;
272 if (tmp102
->config_orig
& TMP102_CONF_SD
) {
274 * Mark that we are not ready with data until the first
275 * conversion is complete
277 tmp102
->ready_time
+= msecs_to_jiffies(CONVERSION_TIME_MS
);
280 hwmon_dev
= devm_hwmon_device_register_with_info(dev
, client
->name
,
284 if (IS_ERR(hwmon_dev
)) {
285 dev_dbg(dev
, "unable to register hwmon device\n");
286 return PTR_ERR(hwmon_dev
);
288 dev_info(dev
, "initialized\n");
293 #ifdef CONFIG_PM_SLEEP
294 static int tmp102_suspend(struct device
*dev
)
296 struct i2c_client
*client
= to_i2c_client(dev
);
297 struct tmp102
*tmp102
= i2c_get_clientdata(client
);
299 return regmap_update_bits(tmp102
->regmap
, TMP102_CONF_REG
,
300 TMP102_CONF_SD
, TMP102_CONF_SD
);
303 static int tmp102_resume(struct device
*dev
)
305 struct i2c_client
*client
= to_i2c_client(dev
);
306 struct tmp102
*tmp102
= i2c_get_clientdata(client
);
309 err
= regmap_update_bits(tmp102
->regmap
, TMP102_CONF_REG
,
312 tmp102
->ready_time
= jiffies
+ msecs_to_jiffies(CONVERSION_TIME_MS
);
316 #endif /* CONFIG_PM */
318 static SIMPLE_DEV_PM_OPS(tmp102_dev_pm_ops
, tmp102_suspend
, tmp102_resume
);
320 static const struct i2c_device_id tmp102_id
[] = {
324 MODULE_DEVICE_TABLE(i2c
, tmp102_id
);
326 static struct i2c_driver tmp102_driver
= {
327 .driver
.name
= DRIVER_NAME
,
328 .driver
.pm
= &tmp102_dev_pm_ops
,
329 .probe
= tmp102_probe
,
330 .id_table
= tmp102_id
,
333 module_i2c_driver(tmp102_driver
);
335 MODULE_AUTHOR("Steven King <sfking@fdwdc.com>");
336 MODULE_DESCRIPTION("Texas Instruments TMP102 temperature sensor driver");
337 MODULE_LICENSE("GPL");