drivers/regulator/qcom_rpm-regulator.c

   1 /*
   2  * Copyright (c) 2014, Sony Mobile Communications AB.
   3  * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 and
   7  * only version 2 as published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  */
  14
  15 #include <linux/module.h>
  16 #include <linux/platform_device.h>
  17 #include <linux/of.h>
  18 #include <linux/of_device.h>
  19 #include <linux/regulator/driver.h>
  20 #include <linux/regulator/machine.h>
  21 #include <linux/regulator/of_regulator.h>
  22 #include <linux/mfd/qcom_rpm.h>
  23
  24 #include <dt-bindings/mfd/qcom-rpm.h>
  25
  26 #define MAX_REQUEST_LEN 2
  27
  28 struct request_member {
  29         int             word;
  30         unsigned int    mask;
  31         int             shift;
  32 };
  33
  34 struct rpm_reg_parts {
  35         struct request_member mV;               /* used if voltage is in mV */
  36         struct request_member uV;               /* used if voltage is in uV */
  37         struct request_member ip;               /* peak current in mA */
  38         struct request_member pd;               /* pull down enable */
  39         struct request_member ia;               /* average current in mA */
  40         struct request_member fm;               /* force mode */
  41         struct request_member pm;               /* power mode */
  42         struct request_member pc;               /* pin control */
  43         struct request_member pf;               /* pin function */
  44         struct request_member enable_state;     /* NCP and switch */
  45         struct request_member comp_mode;        /* NCP */
  46         struct request_member freq;             /* frequency: NCP and SMPS */
  47         struct request_member freq_clk_src;     /* clock source: SMPS */
  48         struct request_member hpm;              /* switch: control OCP and SS */
  49         int request_len;
  50 };
  51
  52 #define FORCE_MODE_IS_2_BITS(reg) \
  53         (((reg)->parts->fm.mask >> (reg)->parts->fm.shift) == 3)
  54
  55 struct qcom_rpm_reg {
  56         struct qcom_rpm *rpm;
  57
  58         struct mutex lock;
  59         struct device *dev;
  60         struct regulator_desc desc;
  61         const struct rpm_reg_parts *parts;
  62
  63         int resource;
  64         u32 val[MAX_REQUEST_LEN];
  65
  66         int uV;
  67         int is_enabled;
  68
  69         bool supports_force_mode_auto;
  70         bool supports_force_mode_bypass;
  71 };
  72
  73 static const struct rpm_reg_parts rpm8660_ldo_parts = {
  74         .request_len    = 2,
  75         .mV             = { 0, 0x00000FFF,  0 },
  76         .ip             = { 0, 0x00FFF000, 12 },
  77         .fm             = { 0, 0x03000000, 24 },
  78         .pc             = { 0, 0x3C000000, 26 },
  79         .pf             = { 0, 0xC0000000, 30 },
  80         .pd             = { 1, 0x00000001,  0 },
  81         .ia             = { 1, 0x00001FFE,  1 },
  82 };
  83
  84 static const struct rpm_reg_parts rpm8660_smps_parts = {
  85         .request_len    = 2,
  86         .mV             = { 0, 0x00000FFF,  0 },
  87         .ip             = { 0, 0x00FFF000, 12 },
  88         .fm             = { 0, 0x03000000, 24 },
  89         .pc             = { 0, 0x3C000000, 26 },
  90         .pf             = { 0, 0xC0000000, 30 },
  91         .pd             = { 1, 0x00000001,  0 },
  92         .ia             = { 1, 0x00001FFE,  1 },
  93         .freq           = { 1, 0x001FE000, 13 },
  94         .freq_clk_src   = { 1, 0x00600000, 21 },
  95 };
  96
  97 static const struct rpm_reg_parts rpm8660_switch_parts = {
  98         .request_len    = 1,
  99         .enable_state   = { 0, 0x00000001,  0 },
 100         .pd             = { 0, 0x00000002,  1 },
 101         .pc             = { 0, 0x0000003C,  2 },
 102         .pf             = { 0, 0x000000C0,  6 },
 103         .hpm            = { 0, 0x00000300,  8 },
 104 };
 105
 106 static const struct rpm_reg_parts rpm8660_ncp_parts = {
 107         .request_len    = 1,
 108         .mV             = { 0, 0x00000FFF,  0 },
 109         .enable_state   = { 0, 0x00001000, 12 },
 110         .comp_mode      = { 0, 0x00002000, 13 },
 111         .freq           = { 0, 0x003FC000, 14 },
 112 };
 113
 114 static const struct rpm_reg_parts rpm8960_ldo_parts = {
 115         .request_len    = 2,
 116         .uV             = { 0, 0x007FFFFF,  0 },
 117         .pd             = { 0, 0x00800000, 23 },
 118         .pc             = { 0, 0x0F000000, 24 },
 119         .pf             = { 0, 0xF0000000, 28 },
 120         .ip             = { 1, 0x000003FF,  0 },
 121         .ia             = { 1, 0x000FFC00, 10 },
 122         .fm             = { 1, 0x00700000, 20 },
 123 };
 124
 125 static const struct rpm_reg_parts rpm8960_smps_parts = {
 126         .request_len    = 2,
 127         .uV             = { 0, 0x007FFFFF,  0 },
 128         .pd             = { 0, 0x00800000, 23 },
 129         .pc             = { 0, 0x0F000000, 24 },
 130         .pf             = { 0, 0xF0000000, 28 },
 131         .ip             = { 1, 0x000003FF,  0 },
 132         .ia             = { 1, 0x000FFC00, 10 },
 133         .fm             = { 1, 0x00700000, 20 },
 134         .pm             = { 1, 0x00800000, 23 },
 135         .freq           = { 1, 0x1F000000, 24 },
 136         .freq_clk_src   = { 1, 0x60000000, 29 },
 137 };
 138
 139 static const struct rpm_reg_parts rpm8960_switch_parts = {
 140         .request_len    = 1,
 141         .enable_state   = { 0, 0x00000001,  0 },
 142         .pd             = { 0, 0x00000002,  1 },
 143         .pc             = { 0, 0x0000003C,  2 },
 144         .pf             = { 0, 0x000003C0,  6 },
 145         .hpm            = { 0, 0x00000C00, 10 },
 146 };
 147
 148 static const struct rpm_reg_parts rpm8960_ncp_parts = {
 149         .request_len    = 1,
 150         .uV             = { 0, 0x007FFFFF,  0 },
 151         .enable_state   = { 0, 0x00800000, 23 },
 152         .comp_mode      = { 0, 0x01000000, 24 },
 153         .freq           = { 0, 0x3E000000, 25 },
 154 };
 155
 156 /*
 157  * Physically available PMIC regulator voltage ranges
 158  */
 159 static const struct regulator_linear_range pldo_ranges[] = {
 160         REGULATOR_LINEAR_RANGE( 750000,   0,  59, 12500),
 161         REGULATOR_LINEAR_RANGE(1500000,  60, 123, 25000),
 162         REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
 163 };
 164
 165 static const struct regulator_linear_range nldo_ranges[] = {
 166         REGULATOR_LINEAR_RANGE( 750000,   0,  63, 12500),
 167 };
 168
 169 static const struct regulator_linear_range nldo1200_ranges[] = {
 170         REGULATOR_LINEAR_RANGE( 375000,   0,  59,  6250),
 171         REGULATOR_LINEAR_RANGE( 750000,  60, 123, 12500),
 172 };
 173
 174 static const struct regulator_linear_range smps_ranges[] = {
 175         REGULATOR_LINEAR_RANGE( 375000,   0,  29, 12500),
 176         REGULATOR_LINEAR_RANGE( 750000,  30,  89, 12500),
 177         REGULATOR_LINEAR_RANGE(1500000,  90, 153, 25000),
 178 };
 179
 180 static const struct regulator_linear_range ftsmps_ranges[] = {
 181         REGULATOR_LINEAR_RANGE( 350000,   0,   6, 50000),
 182         REGULATOR_LINEAR_RANGE( 700000,   7,  63, 12500),
 183         REGULATOR_LINEAR_RANGE(1500000,  64, 100, 50000),
 184 };
 185
 186 static const struct regulator_linear_range smb208_ranges[] = {
 187         REGULATOR_LINEAR_RANGE( 375000,   0,  29, 12500),
 188         REGULATOR_LINEAR_RANGE( 750000,  30,  89, 12500),
 189         REGULATOR_LINEAR_RANGE(1500000,  90, 153, 25000),
 190         REGULATOR_LINEAR_RANGE(3100000, 154, 234, 25000),
 191 };
 192
 193 static const struct regulator_linear_range ncp_ranges[] = {
 194         REGULATOR_LINEAR_RANGE(1500000,   0,  31, 50000),
 195 };
 196
 197 static int rpm_reg_write(struct qcom_rpm_reg *vreg,
 198                          const struct request_member *req,
 199                          const int value)
 200 {
 201         if (WARN_ON((value << req->shift) & ~req->mask))
 202                 return -EINVAL;
 203
 204         vreg->val[req->word] &= ~req->mask;
 205         vreg->val[req->word] |= value << req->shift;
 206
 207         return qcom_rpm_write(vreg->rpm,
 208                               QCOM_RPM_ACTIVE_STATE,
 209                               vreg->resource,
 210                               vreg->val,
 211                               vreg->parts->request_len);
 212 }
 213
 214 static int rpm_reg_set_mV_sel(struct regulator_dev *rdev,
 215                               unsigned selector)
 216 {
 217         struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
 218         const struct rpm_reg_parts *parts = vreg->parts;
 219         const struct request_member *req = &parts->mV;
 220         int ret = 0;
 221         int uV;
 222
 223         if (req->mask == 0)
 224                 return -EINVAL;
 225
 226         uV = regulator_list_voltage_linear_range(rdev, selector);
 227         if (uV < 0)
 228                 return uV;
 229
 230         mutex_lock(&vreg->lock);
 231         if (vreg->is_enabled)
 232                 ret = rpm_reg_write(vreg, req, uV / 1000);
 233
 234         if (!ret)
 235                 vreg->uV = uV;
 236         mutex_unlock(&vreg->lock);
 237
 238         return ret;
 239 }
 240
 241 static int rpm_reg_set_uV_sel(struct regulator_dev *rdev,
 242                               unsigned selector)
 243 {
 244         struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
 245         const struct rpm_reg_parts *parts = vreg->parts;
 246         const struct request_member *req = &parts->uV;
 247         int ret = 0;
 248         int uV;
 249
 250         if (req->mask == 0)
 251                 return -EINVAL;
 252
 253         uV = regulator_list_voltage_linear_range(rdev, selector);
 254         if (uV < 0)
 255                 return uV;
 256
 257         mutex_lock(&vreg->lock);
 258         if (vreg->is_enabled)
 259                 ret = rpm_reg_write(vreg, req, uV);
 260
 261         if (!ret)
 262                 vreg->uV = uV;
 263         mutex_unlock(&vreg->lock);
 264
 265         return ret;
 266 }
 267
 268 static int rpm_reg_get_voltage(struct regulator_dev *rdev)
 269 {
 270         struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
 271
 272         return vreg->uV;
 273 }
 274
 275 static int rpm_reg_mV_enable(struct regulator_dev *rdev)
 276 {
 277         struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
 278         const struct rpm_reg_parts *parts = vreg->parts;
 279         const struct request_member *req = &parts->mV;
 280         int ret;
 281
 282         if (req->mask == 0)
 283                 return -EINVAL;
 284
 285         mutex_lock(&vreg->lock);
 286         ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
 287         if (!ret)
 288                 vreg->is_enabled = 1;
 289         mutex_unlock(&vreg->lock);
 290
 291         return ret;
 292 }
 293
 294 static int rpm_reg_uV_enable(struct regulator_dev *rdev)
 295 {
 296         struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
 297         const struct rpm_reg_parts *parts = vreg->parts;
 298         const struct request_member *req = &parts->uV;
 299         int ret;
 300
 301         if (req->mask == 0)
 302                 return -EINVAL;
 303
 304         mutex_lock(&vreg->lock);
 305         ret = rpm_reg_write(vreg, req, vreg->uV);
 306         if (!ret)
 307                 vreg->is_enabled = 1;
 308         mutex_unlock(&vreg->lock);
 309
 310         return ret;
 311 }
 312
 313 static int rpm_reg_switch_enable(struct regulator_dev *rdev)
 314 {
 315         struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
 316         const struct rpm_reg_parts *parts = vreg->parts;
 317         const struct request_member *req = &parts->enable_state;
 318         int ret;
 319
 320         if (req->mask == 0)
 321                 return -EINVAL;
 322
 323         mutex_lock(&vreg->lock);
 324         ret = rpm_reg_write(vreg, req, 1);
 325         if (!ret)
 326                 vreg->is_enabled = 1;
 327         mutex_unlock(&vreg->lock);
 328
 329         return ret;
 330 }
 331
 332 static int rpm_reg_mV_disable(struct regulator_dev *rdev)
 333 {
 334         struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
 335         const struct rpm_reg_parts *parts = vreg->parts;
 336         const struct request_member *req = &parts->mV;
 337         int ret;
 338
 339         if (req->mask == 0)
 340                 return -EINVAL;
 341
 342         mutex_lock(&vreg->lock);
 343         ret = rpm_reg_write(vreg, req, 0);
 344         if (!ret)
 345                 vreg->is_enabled = 0;
 346         mutex_unlock(&vreg->lock);
 347
 348         return ret;
 349 }
 350
 351 static int rpm_reg_uV_disable(struct regulator_dev *rdev)
 352 {
 353         struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
 354         const struct rpm_reg_parts *parts = vreg->parts;
 355         const struct request_member *req = &parts->uV;
 356         int ret;
 357
 358         if (req->mask == 0)
 359                 return -EINVAL;
 360
 361         mutex_lock(&vreg->lock);
 362         ret = rpm_reg_write(vreg, req, 0);
 363         if (!ret)
 364                 vreg->is_enabled = 0;
 365         mutex_unlock(&vreg->lock);
 366
 367         return ret;
 368 }
 369
 370 static int rpm_reg_switch_disable(struct regulator_dev *rdev)
 371 {
 372         struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
 373         const struct rpm_reg_parts *parts = vreg->parts;
 374         const struct request_member *req = &parts->enable_state;
 375         int ret;
 376
 377         if (req->mask == 0)
 378                 return -EINVAL;
 379
 380         mutex_lock(&vreg->lock);
 381         ret = rpm_reg_write(vreg, req, 0);
 382         if (!ret)
 383                 vreg->is_enabled = 0;
 384         mutex_unlock(&vreg->lock);
 385
 386         return ret;
 387 }
 388
 389 static int rpm_reg_is_enabled(struct regulator_dev *rdev)
 390 {
 391         struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
 392
 393         return vreg->is_enabled;
 394 }
 395
 396 static int rpm_reg_set_load(struct regulator_dev *rdev, int load_uA)
 397 {
 398         struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
 399         const struct rpm_reg_parts *parts = vreg->parts;
 400         const struct request_member *req = &parts->ia;
 401         int load_mA = load_uA / 1000;
 402         int max_mA = req->mask >> req->shift;
 403         int ret;
 404
 405         if (req->mask == 0)
 406                 return -EINVAL;
 407
 408         if (load_mA > max_mA)
 409                 load_mA = max_mA;
 410
 411         mutex_lock(&vreg->lock);
 412         ret = rpm_reg_write(vreg, req, load_mA);
 413         mutex_unlock(&vreg->lock);
 414
 415         return ret;
 416 }
 417
 418 static struct regulator_ops uV_ops = {
 419         .list_voltage = regulator_list_voltage_linear_range,
 420
 421         .set_voltage_sel = rpm_reg_set_uV_sel,
 422         .get_voltage = rpm_reg_get_voltage,
 423
 424         .enable = rpm_reg_uV_enable,
 425         .disable = rpm_reg_uV_disable,
 426         .is_enabled = rpm_reg_is_enabled,
 427
 428         .set_load = rpm_reg_set_load,
 429 };
 430
 431 static struct regulator_ops mV_ops = {
 432         .list_voltage = regulator_list_voltage_linear_range,
 433
 434         .set_voltage_sel = rpm_reg_set_mV_sel,
 435         .get_voltage = rpm_reg_get_voltage,
 436
 437         .enable = rpm_reg_mV_enable,
 438         .disable = rpm_reg_mV_disable,
 439         .is_enabled = rpm_reg_is_enabled,
 440
 441         .set_load = rpm_reg_set_load,
 442 };
 443
 444 static struct regulator_ops switch_ops = {
 445         .enable = rpm_reg_switch_enable,
 446         .disable = rpm_reg_switch_disable,
 447         .is_enabled = rpm_reg_is_enabled,
 448 };
 449
 450 /*
 451  * PM8018 regulators
 452  */
 453 static const struct qcom_rpm_reg pm8018_pldo = {
 454         .desc.linear_ranges = pldo_ranges,
 455         .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
 456         .desc.n_voltages = 161,
 457         .desc.ops = &uV_ops,
 458         .parts = &rpm8960_ldo_parts,
 459         .supports_force_mode_auto = false,
 460         .supports_force_mode_bypass = false,
 461 };
 462
 463 static const struct qcom_rpm_reg pm8018_nldo = {
 464         .desc.linear_ranges = nldo_ranges,
 465         .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
 466         .desc.n_voltages = 64,
 467         .desc.ops = &uV_ops,
 468         .parts = &rpm8960_ldo_parts,
 469         .supports_force_mode_auto = false,
 470         .supports_force_mode_bypass = false,
 471 };
 472
 473 static const struct qcom_rpm_reg pm8018_smps = {
 474         .desc.linear_ranges = smps_ranges,
 475         .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
 476         .desc.n_voltages = 154,
 477         .desc.ops = &uV_ops,
 478         .parts = &rpm8960_smps_parts,
 479         .supports_force_mode_auto = false,
 480         .supports_force_mode_bypass = false,
 481 };
 482
 483 static const struct qcom_rpm_reg pm8018_switch = {
 484         .desc.ops = &switch_ops,
 485         .parts = &rpm8960_switch_parts,
 486 };
 487
 488 /*
 489  * PM8058 regulators
 490  */
 491 static const struct qcom_rpm_reg pm8058_pldo = {
 492         .desc.linear_ranges = pldo_ranges,
 493         .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
 494         .desc.n_voltages = 161,
 495         .desc.ops = &mV_ops,
 496         .parts = &rpm8660_ldo_parts,
 497         .supports_force_mode_auto = false,
 498         .supports_force_mode_bypass = false,
 499 };
 500
 501 static const struct qcom_rpm_reg pm8058_nldo = {
 502         .desc.linear_ranges = nldo_ranges,
 503         .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
 504         .desc.n_voltages = 64,
 505         .desc.ops = &mV_ops,
 506         .parts = &rpm8660_ldo_parts,
 507         .supports_force_mode_auto = false,
 508         .supports_force_mode_bypass = false,
 509 };
 510
 511 static const struct qcom_rpm_reg pm8058_smps = {
 512         .desc.linear_ranges = smps_ranges,
 513         .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
 514         .desc.n_voltages = 154,
 515         .desc.ops = &mV_ops,
 516         .parts = &rpm8660_smps_parts,
 517         .supports_force_mode_auto = false,
 518         .supports_force_mode_bypass = false,
 519 };
 520
 521 static const struct qcom_rpm_reg pm8058_ncp = {
 522         .desc.linear_ranges = ncp_ranges,
 523         .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
 524         .desc.n_voltages = 32,
 525         .desc.ops = &mV_ops,
 526         .parts = &rpm8660_ncp_parts,
 527 };
 528
 529 static const struct qcom_rpm_reg pm8058_switch = {
 530         .desc.ops = &switch_ops,
 531         .parts = &rpm8660_switch_parts,
 532 };
 533
 534 /*
 535  * PM8901 regulators
 536  */
 537 static const struct qcom_rpm_reg pm8901_pldo = {
 538         .desc.linear_ranges = pldo_ranges,
 539         .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
 540         .desc.n_voltages = 161,
 541         .desc.ops = &mV_ops,
 542         .parts = &rpm8660_ldo_parts,
 543         .supports_force_mode_auto = false,
 544         .supports_force_mode_bypass = true,
 545 };
 546
 547 static const struct qcom_rpm_reg pm8901_nldo = {
 548         .desc.linear_ranges = nldo_ranges,
 549         .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
 550         .desc.n_voltages = 64,
 551         .desc.ops = &mV_ops,
 552         .parts = &rpm8660_ldo_parts,
 553         .supports_force_mode_auto = false,
 554         .supports_force_mode_bypass = true,
 555 };
 556
 557 static const struct qcom_rpm_reg pm8901_ftsmps = {
 558         .desc.linear_ranges = ftsmps_ranges,
 559         .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
 560         .desc.n_voltages = 101,
 561         .desc.ops = &mV_ops,
 562         .parts = &rpm8660_smps_parts,
 563         .supports_force_mode_auto = true,
 564         .supports_force_mode_bypass = false,
 565 };
 566
 567 static const struct qcom_rpm_reg pm8901_switch = {
 568         .desc.ops = &switch_ops,
 569         .parts = &rpm8660_switch_parts,
 570 };
 571
 572 /*
 573  * PM8921 regulators
 574  */
 575 static const struct qcom_rpm_reg pm8921_pldo = {
 576         .desc.linear_ranges = pldo_ranges,
 577         .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
 578         .desc.n_voltages = 161,
 579         .desc.ops = &uV_ops,
 580         .parts = &rpm8960_ldo_parts,
 581         .supports_force_mode_auto = false,
 582         .supports_force_mode_bypass = true,
 583 };
 584
 585 static const struct qcom_rpm_reg pm8921_nldo = {
 586         .desc.linear_ranges = nldo_ranges,
 587         .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
 588         .desc.n_voltages = 64,
 589         .desc.ops = &uV_ops,
 590         .parts = &rpm8960_ldo_parts,
 591         .supports_force_mode_auto = false,
 592         .supports_force_mode_bypass = true,
 593 };
 594
 595 static const struct qcom_rpm_reg pm8921_nldo1200 = {
 596         .desc.linear_ranges = nldo1200_ranges,
 597         .desc.n_linear_ranges = ARRAY_SIZE(nldo1200_ranges),
 598         .desc.n_voltages = 124,
 599         .desc.ops = &uV_ops,
 600         .parts = &rpm8960_ldo_parts,
 601         .supports_force_mode_auto = false,
 602         .supports_force_mode_bypass = true,
 603 };
 604
 605 static const struct qcom_rpm_reg pm8921_smps = {
 606         .desc.linear_ranges = smps_ranges,
 607         .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
 608         .desc.n_voltages = 154,
 609         .desc.ops = &uV_ops,
 610         .parts = &rpm8960_smps_parts,
 611         .supports_force_mode_auto = true,
 612         .supports_force_mode_bypass = false,
 613 };
 614
 615 static const struct qcom_rpm_reg pm8921_ftsmps = {
 616         .desc.linear_ranges = ftsmps_ranges,
 617         .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
 618         .desc.n_voltages = 101,
 619         .desc.ops = &uV_ops,
 620         .parts = &rpm8960_smps_parts,
 621         .supports_force_mode_auto = true,
 622         .supports_force_mode_bypass = false,
 623 };
 624
 625 static const struct qcom_rpm_reg pm8921_ncp = {
 626         .desc.linear_ranges = ncp_ranges,
 627         .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
 628         .desc.n_voltages = 32,
 629         .desc.ops = &uV_ops,
 630         .parts = &rpm8960_ncp_parts,
 631 };
 632
 633 static const struct qcom_rpm_reg pm8921_switch = {
 634         .desc.ops = &switch_ops,
 635         .parts = &rpm8960_switch_parts,
 636 };
 637
 638 static const struct qcom_rpm_reg smb208_smps = {
 639         .desc.linear_ranges = smb208_ranges,
 640         .desc.n_linear_ranges = ARRAY_SIZE(smb208_ranges),
 641         .desc.n_voltages = 235,
 642         .desc.ops = &uV_ops,
 643         .parts = &rpm8960_smps_parts,
 644         .supports_force_mode_auto = false,
 645         .supports_force_mode_bypass = false,
 646 };
 647
 648 static int rpm_reg_set(struct qcom_rpm_reg *vreg,
 649                        const struct request_member *req,
 650                        const int value)
 651 {
 652         if (req->mask == 0 || (value << req->shift) & ~req->mask)
 653                 return -EINVAL;
 654
 655         vreg->val[req->word] &= ~req->mask;
 656         vreg->val[req->word] |= value << req->shift;
 657
 658         return 0;
 659 }
 660
 661 static int rpm_reg_of_parse_freq(struct device *dev,
 662                                  struct device_node *node,
 663                                  struct qcom_rpm_reg *vreg)
 664 {
 665         static const int freq_table[] = {
 666                 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, 2740000,
 667                 2400000, 2130000, 1920000, 1750000, 1600000, 1480000, 1370000,
 668                 1280000, 1200000,
 669
 670         };
 671         const char *key;
 672         u32 freq;
 673         int ret;
 674         int i;
 675
 676         key = "qcom,switch-mode-frequency";
 677         ret = of_property_read_u32(node, key, &freq);
 678         if (ret) {
 679                 dev_err(dev, "regulator requires %s property\n", key);
 680                 return -EINVAL;
 681         }
 682
 683         for (i = 0; i < ARRAY_SIZE(freq_table); i++) {
 684                 if (freq == freq_table[i]) {
 685                         rpm_reg_set(vreg, &vreg->parts->freq, i + 1);
 686                         return 0;
 687                 }
 688         }
 689
 690         dev_err(dev, "invalid frequency %d\n", freq);
 691         return -EINVAL;
 692 }
 693
 694 static int rpm_reg_of_parse(struct device_node *node,
 695                             const struct regulator_desc *desc,
 696                             struct regulator_config *config)
 697 {
 698         struct qcom_rpm_reg *vreg = config->driver_data;
 699         struct device *dev = config->dev;
 700         const char *key;
 701         u32 force_mode;
 702         bool pwm;
 703         u32 val;
 704         int ret;
 705
 706         key = "bias-pull-down";
 707         if (of_property_read_bool(node, key)) {
 708                 ret = rpm_reg_set(vreg, &vreg->parts->pd, 1);
 709                 if (ret) {
 710                         dev_err(dev, "%s is invalid", key);
 711                         return ret;
 712                 }
 713         }
 714
 715         if (vreg->parts->freq.mask) {
 716                 ret = rpm_reg_of_parse_freq(dev, node, vreg);
 717                 if (ret < 0)
 718                         return ret;
 719         }
 720
 721         if (vreg->parts->pm.mask) {
 722                 key = "qcom,power-mode-hysteretic";
 723                 pwm = !of_property_read_bool(node, key);
 724
 725                 ret = rpm_reg_set(vreg, &vreg->parts->pm, pwm);
 726                 if (ret) {
 727                         dev_err(dev, "failed to set power mode\n");
 728                         return ret;
 729                 }
 730         }
 731
 732         if (vreg->parts->fm.mask) {
 733                 force_mode = -1;
 734
 735                 key = "qcom,force-mode";
 736                 ret = of_property_read_u32(node, key, &val);
 737                 if (ret == -EINVAL) {
 738                         val = QCOM_RPM_FORCE_MODE_NONE;
 739                 } else if (ret < 0) {
 740                         dev_err(dev, "failed to read %s\n", key);
 741                         return ret;
 742                 }
 743
 744                 /*
 745                  * If force-mode is encoded as 2 bits then the
 746                  * possible register values are:
 747                  * NONE, LPM, HPM
 748                  * otherwise:
 749                  * NONE, LPM, AUTO, HPM, BYPASS
 750                  */
 751                 switch (val) {
 752                 case QCOM_RPM_FORCE_MODE_NONE:
 753                         force_mode = 0;
 754                         break;
 755                 case QCOM_RPM_FORCE_MODE_LPM:
 756                         force_mode = 1;
 757                         break;
 758                 case QCOM_RPM_FORCE_MODE_HPM:
 759                         if (FORCE_MODE_IS_2_BITS(vreg))
 760                                 force_mode = 2;
 761                         else
 762                                 force_mode = 3;
 763                         break;
 764                 case QCOM_RPM_FORCE_MODE_AUTO:
 765                         if (vreg->supports_force_mode_auto)
 766                                 force_mode = 2;
 767                         break;
 768                 case QCOM_RPM_FORCE_MODE_BYPASS:
 769                         if (vreg->supports_force_mode_bypass)
 770                                 force_mode = 4;
 771                         break;
 772                 }
 773
 774                 if (force_mode == -1) {
 775                         dev_err(dev, "invalid force mode\n");
 776                         return -EINVAL;
 777                 }
 778
 779                 ret = rpm_reg_set(vreg, &vreg->parts->fm, force_mode);
 780                 if (ret) {
 781                         dev_err(dev, "failed to set force mode\n");
 782                         return ret;
 783                 }
 784         }
 785
 786         return 0;
 787 }
 788
 789 struct rpm_regulator_data {
 790         const char *name;
 791         int resource;
 792         const struct qcom_rpm_reg *template;
 793         const char *supply;
 794 };
 795
 796 static const struct rpm_regulator_data rpm_pm8018_regulators[] = {
 797         { "s1",  QCOM_RPM_PM8018_SMPS1, &pm8018_smps, "vdd_s1" },
 798         { "s2",  QCOM_RPM_PM8018_SMPS2, &pm8018_smps, "vdd_s2" },
 799         { "s3",  QCOM_RPM_PM8018_SMPS3, &pm8018_smps, "vdd_s3" },
 800         { "s4",  QCOM_RPM_PM8018_SMPS4, &pm8018_smps, "vdd_s4" },
 801         { "s5",  QCOM_RPM_PM8018_SMPS5, &pm8018_smps, "vdd_s5" },
 802
 803         { "l2",  QCOM_RPM_PM8018_LDO2,  &pm8018_pldo, "vdd_l2" },
 804         { "l3",  QCOM_RPM_PM8018_LDO3,  &pm8018_pldo, "vdd_l3" },
 805         { "l4",  QCOM_RPM_PM8018_LDO4,  &pm8018_pldo, "vdd_l4" },
 806         { "l5",  QCOM_RPM_PM8018_LDO5,  &pm8018_pldo, "vdd_l5" },
 807         { "l6",  QCOM_RPM_PM8018_LDO6,  &pm8018_pldo, "vdd_l7" },
 808         { "l7",  QCOM_RPM_PM8018_LDO7,  &pm8018_pldo, "vdd_l7" },
 809         { "l8",  QCOM_RPM_PM8018_LDO8,  &pm8018_nldo, "vdd_l8" },
 810         { "l9",  QCOM_RPM_PM8018_LDO9,  &pm8921_nldo1200,
 811                                                       "vdd_l9_l10_l11_l12" },
 812         { "l10", QCOM_RPM_PM8018_LDO10, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
 813         { "l11", QCOM_RPM_PM8018_LDO11, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
 814         { "l12", QCOM_RPM_PM8018_LDO12, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
 815         { "l14", QCOM_RPM_PM8018_LDO14, &pm8018_pldo, "vdd_l14" },
 816
 817         { "lvs1", QCOM_RPM_PM8018_LVS1, &pm8018_switch, "lvs1_in" },
 818
 819         { }
 820 };
 821
 822 static const struct rpm_regulator_data rpm_pm8058_regulators[] = {
 823         { "l0",   QCOM_RPM_PM8058_LDO0,   &pm8058_nldo, "vdd_l0_l1_lvs" },
 824         { "l1",   QCOM_RPM_PM8058_LDO1,   &pm8058_nldo, "vdd_l0_l1_lvs" },
 825         { "l2",   QCOM_RPM_PM8058_LDO2,   &pm8058_pldo, "vdd_l2_l11_l12" },
 826         { "l3",   QCOM_RPM_PM8058_LDO3,   &pm8058_pldo, "vdd_l3_l4_l5" },
 827         { "l4",   QCOM_RPM_PM8058_LDO4,   &pm8058_pldo, "vdd_l3_l4_l5" },
 828         { "l5",   QCOM_RPM_PM8058_LDO5,   &pm8058_pldo, "vdd_l3_l4_l5" },
 829         { "l6",   QCOM_RPM_PM8058_LDO6,   &pm8058_pldo, "vdd_l6_l7" },
 830         { "l7",   QCOM_RPM_PM8058_LDO7,   &pm8058_pldo, "vdd_l6_l7" },
 831         { "l8",   QCOM_RPM_PM8058_LDO8,   &pm8058_pldo, "vdd_l8" },
 832         { "l9",   QCOM_RPM_PM8058_LDO9,   &pm8058_pldo, "vdd_l9" },
 833         { "l10",  QCOM_RPM_PM8058_LDO10,  &pm8058_pldo, "vdd_l10" },
 834         { "l11",  QCOM_RPM_PM8058_LDO11,  &pm8058_pldo, "vdd_l2_l11_l12" },
 835         { "l12",  QCOM_RPM_PM8058_LDO12,  &pm8058_pldo, "vdd_l2_l11_l12" },
 836         { "l13",  QCOM_RPM_PM8058_LDO13,  &pm8058_pldo, "vdd_l13_l16" },
 837         { "l14",  QCOM_RPM_PM8058_LDO14,  &pm8058_pldo, "vdd_l14_l15" },
 838         { "l15",  QCOM_RPM_PM8058_LDO15,  &pm8058_pldo, "vdd_l14_l15" },
 839         { "l16",  QCOM_RPM_PM8058_LDO16,  &pm8058_pldo, "vdd_l13_l16" },
 840         { "l17",  QCOM_RPM_PM8058_LDO17,  &pm8058_pldo, "vdd_l17_l18" },
 841         { "l18",  QCOM_RPM_PM8058_LDO18,  &pm8058_pldo, "vdd_l17_l18" },
 842         { "l19",  QCOM_RPM_PM8058_LDO19,  &pm8058_pldo, "vdd_l19_l20" },
 843         { "l20",  QCOM_RPM_PM8058_LDO20,  &pm8058_pldo, "vdd_l19_l20" },
 844         { "l21",  QCOM_RPM_PM8058_LDO21,  &pm8058_nldo, "vdd_l21" },
 845         { "l22",  QCOM_RPM_PM8058_LDO22,  &pm8058_nldo, "vdd_l22" },
 846         { "l23",  QCOM_RPM_PM8058_LDO23,  &pm8058_nldo, "vdd_l23_l24_l25" },
 847         { "l24",  QCOM_RPM_PM8058_LDO24,  &pm8058_nldo, "vdd_l23_l24_l25" },
 848         { "l25",  QCOM_RPM_PM8058_LDO25,  &pm8058_nldo, "vdd_l23_l24_l25" },
 849
 850         { "s0",   QCOM_RPM_PM8058_SMPS0,  &pm8058_smps, "vdd_s0" },
 851         { "s1",   QCOM_RPM_PM8058_SMPS1,  &pm8058_smps, "vdd_s1" },
 852         { "s2",   QCOM_RPM_PM8058_SMPS2,  &pm8058_smps, "vdd_s2" },
 853         { "s3",   QCOM_RPM_PM8058_SMPS3,  &pm8058_smps, "vdd_s3" },
 854         { "s4",   QCOM_RPM_PM8058_SMPS4,  &pm8058_smps, "vdd_s4" },
 855
 856         { "lvs0", QCOM_RPM_PM8058_LVS0, &pm8058_switch, "vdd_l0_l1_lvs" },
 857         { "lvs1", QCOM_RPM_PM8058_LVS1, &pm8058_switch, "vdd_l0_l1_lvs" },
 858
 859         { "ncp",  QCOM_RPM_PM8058_NCP, &pm8058_ncp, "vdd_ncp" },
 860         { }
 861 };
 862
 863 static const struct rpm_regulator_data rpm_pm8901_regulators[] = {
 864         { "l0",   QCOM_RPM_PM8901_LDO0, &pm8901_nldo, "vdd_l0" },
 865         { "l1",   QCOM_RPM_PM8901_LDO1, &pm8901_pldo, "vdd_l1" },
 866         { "l2",   QCOM_RPM_PM8901_LDO2, &pm8901_pldo, "vdd_l2" },
 867         { "l3",   QCOM_RPM_PM8901_LDO3, &pm8901_pldo, "vdd_l3" },
 868         { "l4",   QCOM_RPM_PM8901_LDO4, &pm8901_pldo, "vdd_l4" },
 869         { "l5",   QCOM_RPM_PM8901_LDO5, &pm8901_pldo, "vdd_l5" },
 870         { "l6",   QCOM_RPM_PM8901_LDO6, &pm8901_pldo, "vdd_l6" },
 871
 872         { "s0",   QCOM_RPM_PM8901_SMPS0, &pm8901_ftsmps, "vdd_s0" },
 873         { "s1",   QCOM_RPM_PM8901_SMPS1, &pm8901_ftsmps, "vdd_s1" },
 874         { "s2",   QCOM_RPM_PM8901_SMPS2, &pm8901_ftsmps, "vdd_s2" },
 875         { "s3",   QCOM_RPM_PM8901_SMPS3, &pm8901_ftsmps, "vdd_s3" },
 876         { "s4",   QCOM_RPM_PM8901_SMPS4, &pm8901_ftsmps, "vdd_s4" },
 877
 878         { "lvs0", QCOM_RPM_PM8901_LVS0, &pm8901_switch, "lvs0_in" },
 879         { "lvs1", QCOM_RPM_PM8901_LVS1, &pm8901_switch, "lvs1_in" },
 880         { "lvs2", QCOM_RPM_PM8901_LVS2, &pm8901_switch, "lvs2_in" },
 881         { "lvs3", QCOM_RPM_PM8901_LVS3, &pm8901_switch, "lvs3_in" },
 882
 883         { "mvs", QCOM_RPM_PM8901_MVS, &pm8901_switch, "mvs_in" },
 884         { }
 885 };
 886
 887 static const struct rpm_regulator_data rpm_pm8921_regulators[] = {
 888         { "s1",  QCOM_RPM_PM8921_SMPS1, &pm8921_smps, "vdd_s1" },
 889         { "s2",  QCOM_RPM_PM8921_SMPS2, &pm8921_smps, "vdd_s2" },
 890         { "s3",  QCOM_RPM_PM8921_SMPS3, &pm8921_smps },
 891         { "s4",  QCOM_RPM_PM8921_SMPS4, &pm8921_smps, "vdd_s4" },
 892         { "s7",  QCOM_RPM_PM8921_SMPS7, &pm8921_smps, "vdd_s7" },
 893         { "s8",  QCOM_RPM_PM8921_SMPS8, &pm8921_smps, "vdd_s8"  },
 894
 895         { "l1",  QCOM_RPM_PM8921_LDO1, &pm8921_nldo, "vdd_l1_l2_l12_l18" },
 896         { "l2",  QCOM_RPM_PM8921_LDO2, &pm8921_nldo, "vdd_l1_l2_l12_l18" },
 897         { "l3",  QCOM_RPM_PM8921_LDO3, &pm8921_pldo, "vdd_l3_l15_l17" },
 898         { "l4",  QCOM_RPM_PM8921_LDO4, &pm8921_pldo, "vdd_l4_l14" },
 899         { "l5",  QCOM_RPM_PM8921_LDO5, &pm8921_pldo, "vdd_l5_l8_l16" },
 900         { "l6",  QCOM_RPM_PM8921_LDO6, &pm8921_pldo, "vdd_l6_l7" },
 901         { "l7",  QCOM_RPM_PM8921_LDO7, &pm8921_pldo, "vdd_l6_l7" },
 902         { "l8",  QCOM_RPM_PM8921_LDO8, &pm8921_pldo, "vdd_l5_l8_l16" },
 903         { "l9",  QCOM_RPM_PM8921_LDO9, &pm8921_pldo, "vdd_l9_l11" },
 904         { "l10", QCOM_RPM_PM8921_LDO10, &pm8921_pldo, "vdd_l10_l22" },
 905         { "l11", QCOM_RPM_PM8921_LDO11, &pm8921_pldo, "vdd_l9_l11" },
 906         { "l12", QCOM_RPM_PM8921_LDO12, &pm8921_nldo, "vdd_l1_l2_l12_l18" },
 907         { "l14", QCOM_RPM_PM8921_LDO14, &pm8921_pldo, "vdd_l4_l14" },
 908         { "l15", QCOM_RPM_PM8921_LDO15, &pm8921_pldo, "vdd_l3_l15_l17" },
 909         { "l16", QCOM_RPM_PM8921_LDO16, &pm8921_pldo, "vdd_l5_l8_l16" },
 910         { "l17", QCOM_RPM_PM8921_LDO17, &pm8921_pldo, "vdd_l3_l15_l17" },
 911         { "l18", QCOM_RPM_PM8921_LDO18, &pm8921_nldo, "vdd_l1_l2_l12_l18" },
 912         { "l21", QCOM_RPM_PM8921_LDO21, &pm8921_pldo, "vdd_l21_l23_l29" },
 913         { "l22", QCOM_RPM_PM8921_LDO22, &pm8921_pldo, "vdd_l10_l22" },
 914         { "l23", QCOM_RPM_PM8921_LDO23, &pm8921_pldo, "vdd_l21_l23_l29" },
 915         { "l24", QCOM_RPM_PM8921_LDO24, &pm8921_nldo1200, "vdd_l24" },
 916         { "l25", QCOM_RPM_PM8921_LDO25, &pm8921_nldo1200, "vdd_l25" },
 917         { "l26", QCOM_RPM_PM8921_LDO26, &pm8921_nldo1200, "vdd_l26" },
 918         { "l27", QCOM_RPM_PM8921_LDO27, &pm8921_nldo1200, "vdd_l27" },
 919         { "l28", QCOM_RPM_PM8921_LDO28, &pm8921_nldo1200, "vdd_l28" },
 920         { "l29", QCOM_RPM_PM8921_LDO29, &pm8921_pldo, "vdd_l21_l23_l29" },
 921
 922         { "lvs1", QCOM_RPM_PM8921_LVS1, &pm8921_switch, "vin_lvs1_3_6" },
 923         { "lvs2", QCOM_RPM_PM8921_LVS2, &pm8921_switch, "vin_lvs2" },
 924         { "lvs3", QCOM_RPM_PM8921_LVS3, &pm8921_switch, "vin_lvs1_3_6" },
 925         { "lvs4", QCOM_RPM_PM8921_LVS4, &pm8921_switch, "vin_lvs4_5_7" },
 926         { "lvs5", QCOM_RPM_PM8921_LVS5, &pm8921_switch, "vin_lvs4_5_7" },
 927         { "lvs6", QCOM_RPM_PM8921_LVS6, &pm8921_switch, "vin_lvs1_3_6" },
 928         { "lvs7", QCOM_RPM_PM8921_LVS7, &pm8921_switch, "vin_lvs4_5_7" },
 929
 930         { "usb-switch", QCOM_RPM_USB_OTG_SWITCH, &pm8921_switch, "vin_5vs" },
 931         { "hdmi-switch", QCOM_RPM_HDMI_SWITCH, &pm8921_switch, "vin_5vs" },
 932         { "ncp", QCOM_RPM_PM8921_NCP, &pm8921_ncp, "vdd_ncp" },
 933         { }
 934 };
 935
 936 static const struct of_device_id rpm_of_match[] = {
 937         { .compatible = "qcom,rpm-pm8018-regulators",
 938                 .data = &rpm_pm8018_regulators },
 939         { .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
 940         { .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
 941         { .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
 942         { }
 943 };
 944 MODULE_DEVICE_TABLE(of, rpm_of_match);
 945
 946 static int rpm_reg_probe(struct platform_device *pdev)
 947 {
 948         const struct rpm_regulator_data *reg;
 949         const struct of_device_id *match;
 950         struct regulator_config config = { };
 951         struct regulator_dev *rdev;
 952         struct qcom_rpm_reg *vreg;
 953         struct qcom_rpm *rpm;
 954
 955         rpm = dev_get_drvdata(pdev->dev.parent);
 956         if (!rpm) {
 957                 dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
 958                 return -ENODEV;
 959         }
 960
 961         match = of_match_device(rpm_of_match, &pdev->dev);
 962         for (reg = match->data; reg->name; reg++) {
 963                 vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
 964                 if (!vreg)
 965                         return -ENOMEM;
 966
 967                 memcpy(vreg, reg->template, sizeof(*vreg));
 968                 mutex_init(&vreg->lock);
 969
 970                 vreg->dev = &pdev->dev;
 971                 vreg->resource = reg->resource;
 972                 vreg->rpm = rpm;
 973
 974                 vreg->desc.id = -1;
 975                 vreg->desc.owner = THIS_MODULE;
 976                 vreg->desc.type = REGULATOR_VOLTAGE;
 977                 vreg->desc.name = reg->name;
 978                 vreg->desc.supply_name = reg->supply;
 979                 vreg->desc.of_match = reg->name;
 980                 vreg->desc.of_parse_cb = rpm_reg_of_parse;
 981
 982                 config.dev = &pdev->dev;
 983                 config.driver_data = vreg;
 984                 rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
 985                 if (IS_ERR(rdev)) {
 986                         dev_err(&pdev->dev, "failed to register %s\n", reg->name);
 987                         return PTR_ERR(rdev);
 988                 }
 989         }
 990
 991         return 0;
 992 }
 993
 994 static struct platform_driver rpm_reg_driver = {
 995         .probe          = rpm_reg_probe,
 996         .driver  = {
 997                 .name  = "qcom_rpm_reg",
 998                 .of_match_table = of_match_ptr(rpm_of_match),
 999         },
1000 };
1001
1002 static int __init rpm_reg_init(void)
1003 {
1004         return platform_driver_register(&rpm_reg_driver);
1005 }
1006 subsys_initcall(rpm_reg_init);
1007
1008 static void __exit rpm_reg_exit(void)
1009 {
1010         platform_driver_unregister(&rpm_reg_driver);
1011 }
1012 module_exit(rpm_reg_exit)
1013
1014 MODULE_DESCRIPTION("Qualcomm RPM regulator driver");
1015 MODULE_LICENSE("GPL v2");