?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
i2c: gpio: fault-injector: refactor incomplete transfer
[linux/fpc-iii.git] / drivers / net / wireless / intel / iwlegacy / 3945-mac.c
blob62a9794f952b5175da68828a83809eeb47c8b4cb
1 /******************************************************************************
2 *
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
4 *
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * more details.
16 *
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
20 *
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
23 *
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *
28 *****************************************************************************/
29
30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
31
32 #include <linux/kernel.h>
33 #include <linux/module.h>
34 #include <linux/init.h>
35 #include <linux/pci.h>
36 #include <linux/pci-aspm.h>
37 #include <linux/slab.h>
38 #include <linux/dma-mapping.h>
39 #include <linux/delay.h>
40 #include <linux/sched.h>
41 #include <linux/skbuff.h>
42 #include <linux/netdevice.h>
43 #include <linux/firmware.h>
44 #include <linux/etherdevice.h>
45 #include <linux/if_arp.h>
46
47 #include <net/ieee80211_radiotap.h>
48 #include <net/mac80211.h>
49
50 #include <asm/div64.h>
51
52 #define DRV_NAME "iwl3945"
53
54 #include "commands.h"
55 #include "common.h"
56 #include "3945.h"
57 #include "iwl-spectrum.h"
58
59 /*
60 * module name, copyright, version, etc.
61 */
62
63 #define DRV_DESCRIPTION \
64 "Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
65
66 #ifdef CONFIG_IWLEGACY_DEBUG
67 #define VD "d"
68 #else
69 #define VD
70 #endif
71
72 /*
73 * add "s" to indicate spectrum measurement included.
74 * we add it here to be consistent with previous releases in which
75 * this was configurable.
76 */
77 #define DRV_VERSION IWLWIFI_VERSION VD "s"
78 #define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation"
79 #define DRV_AUTHOR "<ilw@linux.intel.com>"
80
81 MODULE_DESCRIPTION(DRV_DESCRIPTION);
82 MODULE_VERSION(DRV_VERSION);
83 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
84 MODULE_LICENSE("GPL");
85
86 /* module parameters */
87 struct il_mod_params il3945_mod_params = {
88 .sw_crypto = 1,
89 .restart_fw = 1,
90 .disable_hw_scan = 1,
91 /* the rest are 0 by default */
92 };
93
94 /**
95 * il3945_get_antenna_flags - Get antenna flags for RXON command
96 * @il: eeprom and antenna fields are used to determine antenna flags
97 *
98 * il->eeprom39 is used to determine if antenna AUX/MAIN are reversed
99 * il3945_mod_params.antenna specifies the antenna diversity mode:
100 *
101 * IL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
102 * IL_ANTENNA_MAIN - Force MAIN antenna
103 * IL_ANTENNA_AUX - Force AUX antenna
104 */
105 __le32
106 il3945_get_antenna_flags(const struct il_priv *il)
107 {
108 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
109
110 switch (il3945_mod_params.antenna) {
111 case IL_ANTENNA_DIVERSITY:
112 return 0;
113
114 case IL_ANTENNA_MAIN:
115 if (eeprom->antenna_switch_type)
116 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
117 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
118
119 case IL_ANTENNA_AUX:
120 if (eeprom->antenna_switch_type)
121 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
122 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
123 }
124
125 /* bad antenna selector value */
126 IL_ERR("Bad antenna selector value (0x%x)\n",
127 il3945_mod_params.antenna);
128
129 return 0; /* "diversity" is default if error */
130 }
131
132 static int
133 il3945_set_ccmp_dynamic_key_info(struct il_priv *il,
134 struct ieee80211_key_conf *keyconf, u8 sta_id)
135 {
136 unsigned long flags;
137 __le16 key_flags = 0;
138 int ret;
139
140 key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
141 key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
142
143 if (sta_id == il->hw_params.bcast_id)
144 key_flags |= STA_KEY_MULTICAST_MSK;
145
146 keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
147 keyconf->hw_key_idx = keyconf->keyidx;
148 key_flags &= ~STA_KEY_FLG_INVALID;
149
150 spin_lock_irqsave(&il->sta_lock, flags);
151 il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
152 il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
153 memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);
154
155 memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen);
156
157 if ((il->stations[sta_id].sta.key.
158 key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
159 il->stations[sta_id].sta.key.key_offset =
160 il_get_free_ucode_key_idx(il);
161 /* else, we are overriding an existing key => no need to allocated room
162 * in uCode. */
163
164 WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
165 "no space for a new key");
166
167 il->stations[sta_id].sta.key.key_flags = key_flags;
168 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
169 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
170
171 D_INFO("hwcrypto: modify ucode station key info\n");
172
173 ret = il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);
174
175 spin_unlock_irqrestore(&il->sta_lock, flags);
176
177 return ret;
178 }
179
180 static int
181 il3945_set_tkip_dynamic_key_info(struct il_priv *il,
182 struct ieee80211_key_conf *keyconf, u8 sta_id)
183 {
184 return -EOPNOTSUPP;
185 }
186
187 static int
188 il3945_set_wep_dynamic_key_info(struct il_priv *il,
189 struct ieee80211_key_conf *keyconf, u8 sta_id)
190 {
191 return -EOPNOTSUPP;
192 }
193
194 static int
195 il3945_clear_sta_key_info(struct il_priv *il, u8 sta_id)
196 {
197 unsigned long flags;
198 struct il_addsta_cmd sta_cmd;
199
200 spin_lock_irqsave(&il->sta_lock, flags);
201 memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key));
202 memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo));
203 il->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
204 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
205 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
206 memcpy(&sta_cmd, &il->stations[sta_id].sta,
207 sizeof(struct il_addsta_cmd));
208 spin_unlock_irqrestore(&il->sta_lock, flags);
209
210 D_INFO("hwcrypto: clear ucode station key info\n");
211 return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
212 }
213
214 static int
215 il3945_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
216 u8 sta_id)
217 {
218 int ret = 0;
219
220 keyconf->hw_key_idx = HW_KEY_DYNAMIC;
221
222 switch (keyconf->cipher) {
223 case WLAN_CIPHER_SUITE_CCMP:
224 ret = il3945_set_ccmp_dynamic_key_info(il, keyconf, sta_id);
225 break;
226 case WLAN_CIPHER_SUITE_TKIP:
227 ret = il3945_set_tkip_dynamic_key_info(il, keyconf, sta_id);
228 break;
229 case WLAN_CIPHER_SUITE_WEP40:
230 case WLAN_CIPHER_SUITE_WEP104:
231 ret = il3945_set_wep_dynamic_key_info(il, keyconf, sta_id);
232 break;
233 default:
234 IL_ERR("Unknown alg: %s alg=%x\n", __func__, keyconf->cipher);
235 ret = -EINVAL;
236 }
237
238 D_WEP("Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
239 keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret);
240
241 return ret;
242 }
243
244 static int
245 il3945_remove_static_key(struct il_priv *il)
246 {
247 int ret = -EOPNOTSUPP;
248
249 return ret;
250 }
251
252 static int
253 il3945_set_static_key(struct il_priv *il, struct ieee80211_key_conf *key)
254 {
255 if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
256 key->cipher == WLAN_CIPHER_SUITE_WEP104)
257 return -EOPNOTSUPP;
258
259 IL_ERR("Static key invalid: cipher %x\n", key->cipher);
260 return -EINVAL;
261 }
262
263 static void
264 il3945_clear_free_frames(struct il_priv *il)
265 {
266 struct list_head *element;
267
268 D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count);
269
270 while (!list_empty(&il->free_frames)) {
271 element = il->free_frames.next;
272 list_del(element);
273 kfree(list_entry(element, struct il3945_frame, list));
274 il->frames_count--;
275 }
276
277 if (il->frames_count) {
278 IL_WARN("%d frames still in use. Did we lose one?\n",
279 il->frames_count);
280 il->frames_count = 0;
281 }
282 }
283
284 static struct il3945_frame *
285 il3945_get_free_frame(struct il_priv *il)
286 {
287 struct il3945_frame *frame;
288 struct list_head *element;
289 if (list_empty(&il->free_frames)) {
290 frame = kzalloc(sizeof(*frame), GFP_KERNEL);
291 if (!frame) {
292 IL_ERR("Could not allocate frame!\n");
293 return NULL;
294 }
295
296 il->frames_count++;
297 return frame;
298 }
299
300 element = il->free_frames.next;
301 list_del(element);
302 return list_entry(element, struct il3945_frame, list);
303 }
304
305 static void
306 il3945_free_frame(struct il_priv *il, struct il3945_frame *frame)
307 {
308 memset(frame, 0, sizeof(*frame));
309 list_add(&frame->list, &il->free_frames);
310 }
311
312 unsigned int
313 il3945_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr,
314 int left)
315 {
316
317 if (!il_is_associated(il) || !il->beacon_skb)
318 return 0;
319
320 if (il->beacon_skb->len > left)
321 return 0;
322
323 memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);
324
325 return il->beacon_skb->len;
326 }
327
328 static int
329 il3945_send_beacon_cmd(struct il_priv *il)
330 {
331 struct il3945_frame *frame;
332 unsigned int frame_size;
333 int rc;
334 u8 rate;
335
336 frame = il3945_get_free_frame(il);
337
338 if (!frame) {
339 IL_ERR("Could not obtain free frame buffer for beacon "
340 "command.\n");
341 return -ENOMEM;
342 }
343
344 rate = il_get_lowest_plcp(il);
345
346 frame_size = il3945_hw_get_beacon_cmd(il, frame, rate);
347
348 rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]);
349
350 il3945_free_frame(il, frame);
351
352 return rc;
353 }
354
355 static void
356 il3945_unset_hw_params(struct il_priv *il)
357 {
358 if (il->_3945.shared_virt)
359 dma_free_coherent(&il->pci_dev->dev,
360 sizeof(struct il3945_shared),
361 il->_3945.shared_virt, il->_3945.shared_phys);
362 }
363
364 static void
365 il3945_build_tx_cmd_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info,
366 struct il_device_cmd *cmd,
367 struct sk_buff *skb_frag, int sta_id)
368 {
369 struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
370 struct il_hw_key *keyinfo = &il->stations[sta_id].keyinfo;
371
372 tx_cmd->sec_ctl = 0;
373
374 switch (keyinfo->cipher) {
375 case WLAN_CIPHER_SUITE_CCMP:
376 tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
377 memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
378 D_TX("tx_cmd with AES hwcrypto\n");
379 break;
380
381 case WLAN_CIPHER_SUITE_TKIP:
382 break;
383
384 case WLAN_CIPHER_SUITE_WEP104:
385 tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
386 /* fall through */
387 case WLAN_CIPHER_SUITE_WEP40:
388 tx_cmd->sec_ctl |=
389 TX_CMD_SEC_WEP | (info->control.hw_key->
390 hw_key_idx & TX_CMD_SEC_MSK) <<
391 TX_CMD_SEC_SHIFT;
392
393 memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
394
395 D_TX("Configuring packet for WEP encryption " "with key %d\n",
396 info->control.hw_key->hw_key_idx);
397 break;
398
399 default:
400 IL_ERR("Unknown encode cipher %x\n", keyinfo->cipher);
401 break;
402 }
403 }
404
405 /*
406 * handle build C_TX command notification.
407 */
408 static void
409 il3945_build_tx_cmd_basic(struct il_priv *il, struct il_device_cmd *cmd,
410 struct ieee80211_tx_info *info,
411 struct ieee80211_hdr *hdr, u8 std_id)
412 {
413 struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
414 __le32 tx_flags = tx_cmd->tx_flags;
415 __le16 fc = hdr->frame_control;
416
417 tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
418 if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
419 tx_flags |= TX_CMD_FLG_ACK_MSK;
420 if (ieee80211_is_mgmt(fc))
421 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
422 if (ieee80211_is_probe_resp(fc) &&
423 !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
424 tx_flags |= TX_CMD_FLG_TSF_MSK;
425 } else {
426 tx_flags &= (~TX_CMD_FLG_ACK_MSK);
427 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
428 }
429
430 tx_cmd->sta_id = std_id;
431 if (ieee80211_has_morefrags(fc))
432 tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
433
434 if (ieee80211_is_data_qos(fc)) {
435 u8 *qc = ieee80211_get_qos_ctl(hdr);
436 tx_cmd->tid_tspec = qc[0] & 0xf;
437 tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
438 } else {
439 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
440 }
441
442 il_tx_cmd_protection(il, info, fc, &tx_flags);
443
444 tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
445 if (ieee80211_is_mgmt(fc)) {
446 if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
447 tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
448 else
449 tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
450 } else {
451 tx_cmd->timeout.pm_frame_timeout = 0;
452 }
453
454 tx_cmd->driver_txop = 0;
455 tx_cmd->tx_flags = tx_flags;
456 tx_cmd->next_frame_len = 0;
457 }
458
459 /*
460 * start C_TX command process
461 */
462 static int
463 il3945_tx_skb(struct il_priv *il,
464 struct ieee80211_sta *sta,
465 struct sk_buff *skb)
466 {
467 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
468 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
469 struct il3945_tx_cmd *tx_cmd;
470 struct il_tx_queue *txq = NULL;
471 struct il_queue *q = NULL;
472 struct il_device_cmd *out_cmd;
473 struct il_cmd_meta *out_meta;
474 dma_addr_t phys_addr;
475 dma_addr_t txcmd_phys;
476 int txq_id = skb_get_queue_mapping(skb);
477 u16 len, idx, hdr_len;
478 u16 firstlen, secondlen;
479 u8 id;
480 u8 unicast;
481 u8 sta_id;
482 u8 tid = 0;
483 __le16 fc;
484 u8 wait_write_ptr = 0;
485 unsigned long flags;
486
487 spin_lock_irqsave(&il->lock, flags);
488 if (il_is_rfkill(il)) {
489 D_DROP("Dropping - RF KILL\n");
490 goto drop_unlock;
491 }
492
493 if ((ieee80211_get_tx_rate(il->hw, info)->hw_value & 0xFF) ==
494 IL_INVALID_RATE) {
495 IL_ERR("ERROR: No TX rate available.\n");
496 goto drop_unlock;
497 }
498
499 unicast = !is_multicast_ether_addr(hdr->addr1);
500 id = 0;
501
502 fc = hdr->frame_control;
503
504 #ifdef CONFIG_IWLEGACY_DEBUG
505 if (ieee80211_is_auth(fc))
506 D_TX("Sending AUTH frame\n");
507 else if (ieee80211_is_assoc_req(fc))
508 D_TX("Sending ASSOC frame\n");
509 else if (ieee80211_is_reassoc_req(fc))
510 D_TX("Sending REASSOC frame\n");
511 #endif
512
513 spin_unlock_irqrestore(&il->lock, flags);
514
515 hdr_len = ieee80211_hdrlen(fc);
516
517 /* Find idx into station table for destination station */
518 sta_id = il_sta_id_or_broadcast(il, sta);
519 if (sta_id == IL_INVALID_STATION) {
520 D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1);
521 goto drop;
522 }
523
524 D_RATE("station Id %d\n", sta_id);
525
526 if (ieee80211_is_data_qos(fc)) {
527 u8 *qc = ieee80211_get_qos_ctl(hdr);
528 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
529 if (unlikely(tid >= MAX_TID_COUNT))
530 goto drop;
531 }
532
533 /* Descriptor for chosen Tx queue */
534 txq = &il->txq[txq_id];
535 q = &txq->q;
536
537 if ((il_queue_space(q) < q->high_mark))
538 goto drop;
539
540 spin_lock_irqsave(&il->lock, flags);
541
542 idx = il_get_cmd_idx(q, q->write_ptr, 0);
543
544 txq->skbs[q->write_ptr] = skb;
545
546 /* Init first empty entry in queue's array of Tx/cmd buffers */
547 out_cmd = txq->cmd[idx];
548 out_meta = &txq->meta[idx];
549 tx_cmd = (struct il3945_tx_cmd *)out_cmd->cmd.payload;
550 memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
551 memset(tx_cmd, 0, sizeof(*tx_cmd));
552
553 /*
554 * Set up the Tx-command (not MAC!) header.
555 * Store the chosen Tx queue and TFD idx within the sequence field;
556 * after Tx, uCode's Tx response will return this value so driver can
557 * locate the frame within the tx queue and do post-tx processing.
558 */
559 out_cmd->hdr.cmd = C_TX;
560 out_cmd->hdr.sequence =
561 cpu_to_le16((u16)
562 (QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr)));
563
564 /* Copy MAC header from skb into command buffer */
565 memcpy(tx_cmd->hdr, hdr, hdr_len);
566
567 if (info->control.hw_key)
568 il3945_build_tx_cmd_hwcrypto(il, info, out_cmd, skb, sta_id);
569
570 /* TODO need this for burst mode later on */
571 il3945_build_tx_cmd_basic(il, out_cmd, info, hdr, sta_id);
572
573 il3945_hw_build_tx_cmd_rate(il, out_cmd, info, hdr, sta_id);
574
575 /* Total # bytes to be transmitted */
576 tx_cmd->len = cpu_to_le16((u16) skb->len);
577
578 tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
579 tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
580
581 /*
582 * Use the first empty entry in this queue's command buffer array
583 * to contain the Tx command and MAC header concatenated together
584 * (payload data will be in another buffer).
585 * Size of this varies, due to varying MAC header length.
586 * If end is not dword aligned, we'll have 2 extra bytes at the end
587 * of the MAC header (device reads on dword boundaries).
588 * We'll tell device about this padding later.
589 */
590 len =
591 sizeof(struct il3945_tx_cmd) + sizeof(struct il_cmd_header) +
592 hdr_len;
593 firstlen = (len + 3) & ~3;
594
595 /* Physical address of this Tx command's header (not MAC header!),
596 * within command buffer array. */
597 txcmd_phys =
598 pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen,
599 PCI_DMA_TODEVICE);
600 if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys)))
601 goto drop_unlock;
602
603 /* Set up TFD's 2nd entry to point directly to remainder of skb,
604 * if any (802.11 null frames have no payload). */
605 secondlen = skb->len - hdr_len;
606 if (secondlen > 0) {
607 phys_addr =
608 pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen,
609 PCI_DMA_TODEVICE);
610 if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr)))
611 goto drop_unlock;
612 }
613
614 /* Add buffer containing Tx command and MAC(!) header to TFD's
615 * first entry */
616 il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0);
617 dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
618 dma_unmap_len_set(out_meta, len, firstlen);
619 if (secondlen > 0)
620 il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 0,
621 U32_PAD(secondlen));
622
623 if (!ieee80211_has_morefrags(hdr->frame_control)) {
624 txq->need_update = 1;
625 } else {
626 wait_write_ptr = 1;
627 txq->need_update = 0;
628 }
629
630 il_update_stats(il, true, fc, skb->len);
631
632 D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence));
633 D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
634 il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd));
635 il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr,
636 ieee80211_hdrlen(fc));
637
638 /* Tell device the write idx *just past* this latest filled TFD */
639 q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
640 il_txq_update_write_ptr(il, txq);
641 spin_unlock_irqrestore(&il->lock, flags);
642
643 if (il_queue_space(q) < q->high_mark && il->mac80211_registered) {
644 if (wait_write_ptr) {
645 spin_lock_irqsave(&il->lock, flags);
646 txq->need_update = 1;
647 il_txq_update_write_ptr(il, txq);
648 spin_unlock_irqrestore(&il->lock, flags);
649 }
650
651 il_stop_queue(il, txq);
652 }
653
654 return 0;
655
656 drop_unlock:
657 spin_unlock_irqrestore(&il->lock, flags);
658 drop:
659 return -1;
660 }
661
662 static int
663 il3945_get_measurement(struct il_priv *il,
664 struct ieee80211_measurement_params *params, u8 type)
665 {
666 struct il_spectrum_cmd spectrum;
667 struct il_rx_pkt *pkt;
668 struct il_host_cmd cmd = {
669 .id = C_SPECTRUM_MEASUREMENT,
670 .data = (void *)&spectrum,
671 .flags = CMD_WANT_SKB,
672 };
673 u32 add_time = le64_to_cpu(params->start_time);
674 int rc;
675 int spectrum_resp_status;
676 int duration = le16_to_cpu(params->duration);
677
678 if (il_is_associated(il))
679 add_time =
680 il_usecs_to_beacons(il,
681 le64_to_cpu(params->start_time) -
682 il->_3945.last_tsf,
683 le16_to_cpu(il->timing.beacon_interval));
684
685 memset(&spectrum, 0, sizeof(spectrum));
686
687 spectrum.channel_count = cpu_to_le16(1);
688 spectrum.flags =
689 RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
690 spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
691 cmd.len = sizeof(spectrum);
692 spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
693
694 if (il_is_associated(il))
695 spectrum.start_time =
696 il_add_beacon_time(il, il->_3945.last_beacon_time, add_time,
697 le16_to_cpu(il->timing.beacon_interval));
698 else
699 spectrum.start_time = 0;
700
701 spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
702 spectrum.channels[0].channel = params->channel;
703 spectrum.channels[0].type = type;
704 if (il->active.flags & RXON_FLG_BAND_24G_MSK)
705 spectrum.flags |=
706 RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK |
707 RXON_FLG_TGG_PROTECT_MSK;
708
709 rc = il_send_cmd_sync(il, &cmd);
710 if (rc)
711 return rc;
712
713 pkt = (struct il_rx_pkt *)cmd.reply_page;
714 if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
715 IL_ERR("Bad return from N_RX_ON_ASSOC command\n");
716 rc = -EIO;
717 }
718
719 spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
720 switch (spectrum_resp_status) {
721 case 0: /* Command will be handled */
722 if (pkt->u.spectrum.id != 0xff) {
723 D_INFO("Replaced existing measurement: %d\n",
724 pkt->u.spectrum.id);
725 il->measurement_status &= ~MEASUREMENT_READY;
726 }
727 il->measurement_status |= MEASUREMENT_ACTIVE;
728 rc = 0;
729 break;
730
731 case 1: /* Command will not be handled */
732 rc = -EAGAIN;
733 break;
734 }
735
736 il_free_pages(il, cmd.reply_page);
737
738 return rc;
739 }
740
741 static void
742 il3945_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb)
743 {
744 struct il_rx_pkt *pkt = rxb_addr(rxb);
745 struct il_alive_resp *palive;
746 struct delayed_work *pwork;
747
748 palive = &pkt->u.alive_frame;
749
750 D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n",
751 palive->is_valid, palive->ver_type, palive->ver_subtype);
752
753 if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
754 D_INFO("Initialization Alive received.\n");
755 memcpy(&il->card_alive_init, &pkt->u.alive_frame,
756 sizeof(struct il_alive_resp));
757 pwork = &il->init_alive_start;
758 } else {
759 D_INFO("Runtime Alive received.\n");
760 memcpy(&il->card_alive, &pkt->u.alive_frame,
761 sizeof(struct il_alive_resp));
762 pwork = &il->alive_start;
763 il3945_disable_events(il);
764 }
765
766 /* We delay the ALIVE response by 5ms to
767 * give the HW RF Kill time to activate... */
768 if (palive->is_valid == UCODE_VALID_OK)
769 queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5));
770 else
771 IL_WARN("uCode did not respond OK.\n");
772 }
773
774 static void
775 il3945_hdl_add_sta(struct il_priv *il, struct il_rx_buf *rxb)
776 {
777 #ifdef CONFIG_IWLEGACY_DEBUG
778 struct il_rx_pkt *pkt = rxb_addr(rxb);
779 #endif
780
781 D_RX("Received C_ADD_STA: 0x%02X\n", pkt->u.status);
782 }
783
784 static void
785 il3945_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb)
786 {
787 struct il_rx_pkt *pkt = rxb_addr(rxb);
788 struct il3945_beacon_notif *beacon = &(pkt->u.beacon_status);
789 #ifdef CONFIG_IWLEGACY_DEBUG
790 u8 rate = beacon->beacon_notify_hdr.rate;
791
792 D_RX("beacon status %x retries %d iss %d " "tsf %d %d rate %d\n",
793 le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
794 beacon->beacon_notify_hdr.failure_frame,
795 le32_to_cpu(beacon->ibss_mgr_status),
796 le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate);
797 #endif
798
799 il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
800
801 }
802
803 /* Handle notification from uCode that card's power state is changing
804 * due to software, hardware, or critical temperature RFKILL */
805 static void
806 il3945_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb)
807 {
808 struct il_rx_pkt *pkt = rxb_addr(rxb);
809 u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
810 unsigned long status = il->status;
811
812 IL_WARN("Card state received: HW:%s SW:%s\n",
813 (flags & HW_CARD_DISABLED) ? "Kill" : "On",
814 (flags & SW_CARD_DISABLED) ? "Kill" : "On");
815
816 _il_wr(il, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
817
818 if (flags & HW_CARD_DISABLED)
819 set_bit(S_RFKILL, &il->status);
820 else
821 clear_bit(S_RFKILL, &il->status);
822
823 il_scan_cancel(il);
824
825 if ((test_bit(S_RFKILL, &status) !=
826 test_bit(S_RFKILL, &il->status)))
827 wiphy_rfkill_set_hw_state(il->hw->wiphy,
828 test_bit(S_RFKILL, &il->status));
829 else
830 wake_up(&il->wait_command_queue);
831 }
832
833 /**
834 * il3945_setup_handlers - Initialize Rx handler callbacks
835 *
836 * Setup the RX handlers for each of the reply types sent from the uCode
837 * to the host.
838 *
839 * This function chains into the hardware specific files for them to setup
840 * any hardware specific handlers as well.
841 */
842 static void
843 il3945_setup_handlers(struct il_priv *il)
844 {
845 il->handlers[N_ALIVE] = il3945_hdl_alive;
846 il->handlers[C_ADD_STA] = il3945_hdl_add_sta;
847 il->handlers[N_ERROR] = il_hdl_error;
848 il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa;
849 il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement;
850 il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep;
851 il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats;
852 il->handlers[N_BEACON] = il3945_hdl_beacon;
853
854 /*
855 * The same handler is used for both the REPLY to a discrete
856 * stats request from the host as well as for the periodic
857 * stats notifications (after received beacons) from the uCode.
858 */
859 il->handlers[C_STATS] = il3945_hdl_c_stats;
860 il->handlers[N_STATS] = il3945_hdl_stats;
861
862 il_setup_rx_scan_handlers(il);
863 il->handlers[N_CARD_STATE] = il3945_hdl_card_state;
864
865 /* Set up hardware specific Rx handlers */
866 il3945_hw_handler_setup(il);
867 }
868
869 /************************** RX-FUNCTIONS ****************************/
870 /*
871 * Rx theory of operation
872 *
873 * The host allocates 32 DMA target addresses and passes the host address
874 * to the firmware at register IL_RFDS_TBL_LOWER + N * RFD_SIZE where N is
875 * 0 to 31
876 *
877 * Rx Queue Indexes
878 * The host/firmware share two idx registers for managing the Rx buffers.
879 *
880 * The READ idx maps to the first position that the firmware may be writing
881 * to -- the driver can read up to (but not including) this position and get
882 * good data.
883 * The READ idx is managed by the firmware once the card is enabled.
884 *
885 * The WRITE idx maps to the last position the driver has read from -- the
886 * position preceding WRITE is the last slot the firmware can place a packet.
887 *
888 * The queue is empty (no good data) if WRITE = READ - 1, and is full if
889 * WRITE = READ.
890 *
891 * During initialization, the host sets up the READ queue position to the first
892 * IDX position, and WRITE to the last (READ - 1 wrapped)
893 *
894 * When the firmware places a packet in a buffer, it will advance the READ idx
895 * and fire the RX interrupt. The driver can then query the READ idx and
896 * process as many packets as possible, moving the WRITE idx forward as it
897 * resets the Rx queue buffers with new memory.
898 *
899 * The management in the driver is as follows:
900 * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
901 * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
902 * to replenish the iwl->rxq->rx_free.
903 * + In il3945_rx_replenish (scheduled) if 'processed' != 'read' then the
904 * iwl->rxq is replenished and the READ IDX is updated (updating the
905 * 'processed' and 'read' driver idxes as well)
906 * + A received packet is processed and handed to the kernel network stack,
907 * detached from the iwl->rxq. The driver 'processed' idx is updated.
908 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
909 * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
910 * IDX is not incremented and iwl->status(RX_STALLED) is set. If there
911 * were enough free buffers and RX_STALLED is set it is cleared.
912 *
913 *
914 * Driver sequence:
915 *
916 * il3945_rx_replenish() Replenishes rx_free list from rx_used, and calls
917 * il3945_rx_queue_restock
918 * il3945_rx_queue_restock() Moves available buffers from rx_free into Rx
919 * queue, updates firmware pointers, and updates
920 * the WRITE idx. If insufficient rx_free buffers
921 * are available, schedules il3945_rx_replenish
922 *
923 * -- enable interrupts --
924 * ISR - il3945_rx() Detach il_rx_bufs from pool up to the
925 * READ IDX, detaching the SKB from the pool.
926 * Moves the packet buffer from queue to rx_used.
927 * Calls il3945_rx_queue_restock to refill any empty
928 * slots.
929 * ...
930 *
931 */
932
933 /**
934 * il3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
935 */
936 static inline __le32
937 il3945_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr)
938 {
939 return cpu_to_le32((u32) dma_addr);
940 }
941
942 /**
943 * il3945_rx_queue_restock - refill RX queue from pre-allocated pool
944 *
945 * If there are slots in the RX queue that need to be restocked,
946 * and we have free pre-allocated buffers, fill the ranks as much
947 * as we can, pulling from rx_free.
948 *
949 * This moves the 'write' idx forward to catch up with 'processed', and
950 * also updates the memory address in the firmware to reference the new
951 * target buffer.
952 */
953 static void
954 il3945_rx_queue_restock(struct il_priv *il)
955 {
956 struct il_rx_queue *rxq = &il->rxq;
957 struct list_head *element;
958 struct il_rx_buf *rxb;
959 unsigned long flags;
960 int write;
961
962 spin_lock_irqsave(&rxq->lock, flags);
963 write = rxq->write & ~0x7;
964 while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
965 /* Get next free Rx buffer, remove from free list */
966 element = rxq->rx_free.next;
967 rxb = list_entry(element, struct il_rx_buf, list);
968 list_del(element);
969
970 /* Point to Rx buffer via next RBD in circular buffer */
971 rxq->bd[rxq->write] =
972 il3945_dma_addr2rbd_ptr(il, rxb->page_dma);
973 rxq->queue[rxq->write] = rxb;
974 rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
975 rxq->free_count--;
976 }
977 spin_unlock_irqrestore(&rxq->lock, flags);
978 /* If the pre-allocated buffer pool is dropping low, schedule to
979 * refill it */
980 if (rxq->free_count <= RX_LOW_WATERMARK)
981 queue_work(il->workqueue, &il->rx_replenish);
982
983 /* If we've added more space for the firmware to place data, tell it.
984 * Increment device's write pointer in multiples of 8. */
985 if (rxq->write_actual != (rxq->write & ~0x7) ||
986 abs(rxq->write - rxq->read) > 7) {
987 spin_lock_irqsave(&rxq->lock, flags);
988 rxq->need_update = 1;
989 spin_unlock_irqrestore(&rxq->lock, flags);
990 il_rx_queue_update_write_ptr(il, rxq);
991 }
992 }
993
994 /**
995 * il3945_rx_replenish - Move all used packet from rx_used to rx_free
996 *
997 * When moving to rx_free an SKB is allocated for the slot.
998 *
999 * Also restock the Rx queue via il3945_rx_queue_restock.
1000 * This is called as a scheduled work item (except for during initialization)
1001 */
1002 static void
1003 il3945_rx_allocate(struct il_priv *il, gfp_t priority)
1004 {
1005 struct il_rx_queue *rxq = &il->rxq;
1006 struct list_head *element;
1007 struct il_rx_buf *rxb;
1008 struct page *page;
1009 dma_addr_t page_dma;
1010 unsigned long flags;
1011 gfp_t gfp_mask = priority;
1012
1013 while (1) {
1014 spin_lock_irqsave(&rxq->lock, flags);
1015 if (list_empty(&rxq->rx_used)) {
1016 spin_unlock_irqrestore(&rxq->lock, flags);
1017 return;
1018 }
1019 spin_unlock_irqrestore(&rxq->lock, flags);
1020
1021 if (rxq->free_count > RX_LOW_WATERMARK)
1022 gfp_mask |= __GFP_NOWARN;
1023
1024 if (il->hw_params.rx_page_order > 0)
1025 gfp_mask |= __GFP_COMP;
1026
1027 /* Alloc a new receive buffer */
1028 page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
1029 if (!page) {
1030 if (net_ratelimit())
1031 D_INFO("Failed to allocate SKB buffer.\n");
1032 if (rxq->free_count <= RX_LOW_WATERMARK &&
1033 net_ratelimit())
1034 IL_ERR("Failed to allocate SKB buffer with %0x."
1035 "Only %u free buffers remaining.\n",
1036 priority, rxq->free_count);
1037 /* We don't reschedule replenish work here -- we will
1038 * call the restock method and if it still needs
1039 * more buffers it will schedule replenish */
1040 break;
1041 }
1042
1043 /* Get physical address of RB/SKB */
1044 page_dma =
1045 pci_map_page(il->pci_dev, page, 0,
1046 PAGE_SIZE << il->hw_params.rx_page_order,
1047 PCI_DMA_FROMDEVICE);
1048
1049 if (unlikely(pci_dma_mapping_error(il->pci_dev, page_dma))) {
1050 __free_pages(page, il->hw_params.rx_page_order);
1051 break;
1052 }
1053
1054 spin_lock_irqsave(&rxq->lock, flags);
1055
1056 if (list_empty(&rxq->rx_used)) {
1057 spin_unlock_irqrestore(&rxq->lock, flags);
1058 pci_unmap_page(il->pci_dev, page_dma,
1059 PAGE_SIZE << il->hw_params.rx_page_order,
1060 PCI_DMA_FROMDEVICE);
1061 __free_pages(page, il->hw_params.rx_page_order);
1062 return;
1063 }
1064
1065 element = rxq->rx_used.next;
1066 rxb = list_entry(element, struct il_rx_buf, list);
1067 list_del(element);
1068
1069 rxb->page = page;
1070 rxb->page_dma = page_dma;
1071 list_add_tail(&rxb->list, &rxq->rx_free);
1072 rxq->free_count++;
1073 il->alloc_rxb_page++;
1074
1075 spin_unlock_irqrestore(&rxq->lock, flags);
1076 }
1077 }
1078
1079 void
1080 il3945_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
1081 {
1082 unsigned long flags;
1083 int i;
1084 spin_lock_irqsave(&rxq->lock, flags);
1085 INIT_LIST_HEAD(&rxq->rx_free);
1086 INIT_LIST_HEAD(&rxq->rx_used);
1087 /* Fill the rx_used queue with _all_ of the Rx buffers */
1088 for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
1089 /* In the reset function, these buffers may have been allocated
1090 * to an SKB, so we need to unmap and free potential storage */
1091 if (rxq->pool[i].page != NULL) {
1092 pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
1093 PAGE_SIZE << il->hw_params.rx_page_order,
1094 PCI_DMA_FROMDEVICE);
1095 __il_free_pages(il, rxq->pool[i].page);
1096 rxq->pool[i].page = NULL;
1097 }
1098 list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
1099 }
1100
1101 /* Set us so that we have processed and used all buffers, but have
1102 * not restocked the Rx queue with fresh buffers */
1103 rxq->read = rxq->write = 0;
1104 rxq->write_actual = 0;
1105 rxq->free_count = 0;
1106 spin_unlock_irqrestore(&rxq->lock, flags);
1107 }
1108
1109 void
1110 il3945_rx_replenish(void *data)
1111 {
1112 struct il_priv *il = data;
1113 unsigned long flags;
1114
1115 il3945_rx_allocate(il, GFP_KERNEL);
1116
1117 spin_lock_irqsave(&il->lock, flags);
1118 il3945_rx_queue_restock(il);
1119 spin_unlock_irqrestore(&il->lock, flags);
1120 }
1121
1122 static void
1123 il3945_rx_replenish_now(struct il_priv *il)
1124 {
1125 il3945_rx_allocate(il, GFP_ATOMIC);
1126
1127 il3945_rx_queue_restock(il);
1128 }
1129
1130 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
1131 * If an SKB has been detached, the POOL needs to have its SKB set to NULL
1132 * This free routine walks the list of POOL entries and if SKB is set to
1133 * non NULL it is unmapped and freed
1134 */
1135 static void
1136 il3945_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
1137 {
1138 int i;
1139 for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
1140 if (rxq->pool[i].page != NULL) {
1141 pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
1142 PAGE_SIZE << il->hw_params.rx_page_order,
1143 PCI_DMA_FROMDEVICE);
1144 __il_free_pages(il, rxq->pool[i].page);
1145 rxq->pool[i].page = NULL;
1146 }
1147 }
1148
1149 dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
1150 rxq->bd_dma);
1151 dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
1152 rxq->rb_stts, rxq->rb_stts_dma);
1153 rxq->bd = NULL;
1154 rxq->rb_stts = NULL;
1155 }
1156
1157 /* Convert linear signal-to-noise ratio into dB */
1158 static u8 ratio2dB[100] = {
1159 /* 0 1 2 3 4 5 6 7 8 9 */
1160 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
1161 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
1162 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
1163 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
1164 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
1165 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
1166 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
1167 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
1168 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
1169 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
1170 };
1171
1172 /* Calculates a relative dB value from a ratio of linear
1173 * (i.e. not dB) signal levels.
1174 * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
1175 int
1176 il3945_calc_db_from_ratio(int sig_ratio)
1177 {
1178 /* 1000:1 or higher just report as 60 dB */
1179 if (sig_ratio >= 1000)
1180 return 60;
1181
1182 /* 100:1 or higher, divide by 10 and use table,
1183 * add 20 dB to make up for divide by 10 */
1184 if (sig_ratio >= 100)
1185 return 20 + (int)ratio2dB[sig_ratio / 10];
1186
1187 /* We shouldn't see this */
1188 if (sig_ratio < 1)
1189 return 0;
1190
1191 /* Use table for ratios 1:1 - 99:1 */
1192 return (int)ratio2dB[sig_ratio];
1193 }
1194
1195 /**
1196 * il3945_rx_handle - Main entry function for receiving responses from uCode
1197 *
1198 * Uses the il->handlers callback function array to invoke
1199 * the appropriate handlers, including command responses,
1200 * frame-received notifications, and other notifications.
1201 */
1202 static void
1203 il3945_rx_handle(struct il_priv *il)
1204 {
1205 struct il_rx_buf *rxb;
1206 struct il_rx_pkt *pkt;
1207 struct il_rx_queue *rxq = &il->rxq;
1208 u32 r, i;
1209 int reclaim;
1210 unsigned long flags;
1211 u8 fill_rx = 0;
1212 u32 count = 8;
1213 int total_empty = 0;
1214
1215 /* uCode's read idx (stored in shared DRAM) indicates the last Rx
1216 * buffer that the driver may process (last buffer filled by ucode). */
1217 r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
1218 i = rxq->read;
1219
1220 /* calculate total frames need to be restock after handling RX */
1221 total_empty = r - rxq->write_actual;
1222 if (total_empty < 0)
1223 total_empty += RX_QUEUE_SIZE;
1224
1225 if (total_empty > (RX_QUEUE_SIZE / 2))
1226 fill_rx = 1;
1227 /* Rx interrupt, but nothing sent from uCode */
1228 if (i == r)
1229 D_RX("r = %d, i = %d\n", r, i);
1230
1231 while (i != r) {
1232 int len;
1233
1234 rxb = rxq->queue[i];
1235
1236 /* If an RXB doesn't have a Rx queue slot associated with it,
1237 * then a bug has been introduced in the queue refilling
1238 * routines -- catch it here */
1239 BUG_ON(rxb == NULL);
1240
1241 rxq->queue[i] = NULL;
1242
1243 pci_unmap_page(il->pci_dev, rxb->page_dma,
1244 PAGE_SIZE << il->hw_params.rx_page_order,
1245 PCI_DMA_FROMDEVICE);
1246 pkt = rxb_addr(rxb);
1247
1248 len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK;
1249 len += sizeof(u32); /* account for status word */
1250
1251 reclaim = il_need_reclaim(il, pkt);
1252
1253 /* Based on type of command response or notification,
1254 * handle those that need handling via function in
1255 * handlers table. See il3945_setup_handlers() */
1256 if (il->handlers[pkt->hdr.cmd]) {
1257 D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i,
1258 il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
1259 il->isr_stats.handlers[pkt->hdr.cmd]++;
1260 il->handlers[pkt->hdr.cmd] (il, rxb);
1261 } else {
1262 /* No handling needed */
1263 D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r,
1264 i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
1265 }
1266
1267 /*
1268 * XXX: After here, we should always check rxb->page
1269 * against NULL before touching it or its virtual
1270 * memory (pkt). Because some handler might have
1271 * already taken or freed the pages.
1272 */
1273
1274 if (reclaim) {
1275 /* Invoke any callbacks, transfer the buffer to caller,
1276 * and fire off the (possibly) blocking il_send_cmd()
1277 * as we reclaim the driver command queue */
1278 if (rxb->page)
1279 il_tx_cmd_complete(il, rxb);
1280 else
1281 IL_WARN("Claim null rxb?\n");
1282 }
1283
1284 /* Reuse the page if possible. For notification packets and
1285 * SKBs that fail to Rx correctly, add them back into the
1286 * rx_free list for reuse later. */
1287 spin_lock_irqsave(&rxq->lock, flags);
1288 if (rxb->page != NULL) {
1289 rxb->page_dma =
1290 pci_map_page(il->pci_dev, rxb->page, 0,
1291 PAGE_SIZE << il->hw_params.
1292 rx_page_order, PCI_DMA_FROMDEVICE);
1293 if (unlikely(pci_dma_mapping_error(il->pci_dev,
1294 rxb->page_dma))) {
1295 __il_free_pages(il, rxb->page);
1296 rxb->page = NULL;
1297 list_add_tail(&rxb->list, &rxq->rx_used);
1298 } else {
1299 list_add_tail(&rxb->list, &rxq->rx_free);
1300 rxq->free_count++;
1301 }
1302 } else
1303 list_add_tail(&rxb->list, &rxq->rx_used);
1304
1305 spin_unlock_irqrestore(&rxq->lock, flags);
1306
1307 i = (i + 1) & RX_QUEUE_MASK;
1308 /* If there are a lot of unused frames,
1309 * restock the Rx queue so ucode won't assert. */
1310 if (fill_rx) {
1311 count++;
1312 if (count >= 8) {
1313 rxq->read = i;
1314 il3945_rx_replenish_now(il);
1315 count = 0;
1316 }
1317 }
1318 }
1319
1320 /* Backtrack one entry */
1321 rxq->read = i;
1322 if (fill_rx)
1323 il3945_rx_replenish_now(il);
1324 else
1325 il3945_rx_queue_restock(il);
1326 }
1327
1328 /* call this function to flush any scheduled tasklet */
1329 static inline void
1330 il3945_synchronize_irq(struct il_priv *il)
1331 {
1332 /* wait to make sure we flush pending tasklet */
1333 synchronize_irq(il->pci_dev->irq);
1334 tasklet_kill(&il->irq_tasklet);
1335 }
1336
1337 static const char *
1338 il3945_desc_lookup(int i)
1339 {
1340 switch (i) {
1341 case 1:
1342 return "FAIL";
1343 case 2:
1344 return "BAD_PARAM";
1345 case 3:
1346 return "BAD_CHECKSUM";
1347 case 4:
1348 return "NMI_INTERRUPT";
1349 case 5:
1350 return "SYSASSERT";
1351 case 6:
1352 return "FATAL_ERROR";
1353 }
1354
1355 return "UNKNOWN";
1356 }
1357
1358 #define ERROR_START_OFFSET (1 * sizeof(u32))
1359 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
1360
1361 void
1362 il3945_dump_nic_error_log(struct il_priv *il)
1363 {
1364 u32 i;
1365 u32 desc, time, count, base, data1;
1366 u32 blink1, blink2, ilink1, ilink2;
1367
1368 base = le32_to_cpu(il->card_alive.error_event_table_ptr);
1369
1370 if (!il3945_hw_valid_rtc_data_addr(base)) {
1371 IL_ERR("Not valid error log pointer 0x%08X\n", base);
1372 return;
1373 }
1374
1375 count = il_read_targ_mem(il, base);
1376
1377 if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
1378 IL_ERR("Start IWL Error Log Dump:\n");
1379 IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count);
1380 }
1381
1382 IL_ERR("Desc Time asrtPC blink2 "
1383 "ilink1 nmiPC Line\n");
1384 for (i = ERROR_START_OFFSET;
1385 i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
1386 i += ERROR_ELEM_SIZE) {
1387 desc = il_read_targ_mem(il, base + i);
1388 time = il_read_targ_mem(il, base + i + 1 * sizeof(u32));
1389 blink1 = il_read_targ_mem(il, base + i + 2 * sizeof(u32));
1390 blink2 = il_read_targ_mem(il, base + i + 3 * sizeof(u32));
1391 ilink1 = il_read_targ_mem(il, base + i + 4 * sizeof(u32));
1392 ilink2 = il_read_targ_mem(il, base + i + 5 * sizeof(u32));
1393 data1 = il_read_targ_mem(il, base + i + 6 * sizeof(u32));
1394
1395 IL_ERR("%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
1396 il3945_desc_lookup(desc), desc, time, blink1, blink2,
1397 ilink1, ilink2, data1);
1398 }
1399 }
1400
1401 static void
1402 il3945_irq_tasklet(struct il_priv *il)
1403 {
1404 u32 inta, handled = 0;
1405 u32 inta_fh;
1406 unsigned long flags;
1407 #ifdef CONFIG_IWLEGACY_DEBUG
1408 u32 inta_mask;
1409 #endif
1410
1411 spin_lock_irqsave(&il->lock, flags);
1412
1413 /* Ack/clear/reset pending uCode interrupts.
1414 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1415 * and will clear only when CSR_FH_INT_STATUS gets cleared. */
1416 inta = _il_rd(il, CSR_INT);
1417 _il_wr(il, CSR_INT, inta);
1418
1419 /* Ack/clear/reset pending flow-handler (DMA) interrupts.
1420 * Any new interrupts that happen after this, either while we're
1421 * in this tasklet, or later, will show up in next ISR/tasklet. */
1422 inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
1423 _il_wr(il, CSR_FH_INT_STATUS, inta_fh);
1424
1425 #ifdef CONFIG_IWLEGACY_DEBUG
1426 if (il_get_debug_level(il) & IL_DL_ISR) {
1427 /* just for debug */
1428 inta_mask = _il_rd(il, CSR_INT_MASK);
1429 D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta,
1430 inta_mask, inta_fh);
1431 }
1432 #endif
1433
1434 spin_unlock_irqrestore(&il->lock, flags);
1435
1436 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
1437 * atomic, make sure that inta covers all the interrupts that
1438 * we've discovered, even if FH interrupt came in just after
1439 * reading CSR_INT. */
1440 if (inta_fh & CSR39_FH_INT_RX_MASK)
1441 inta |= CSR_INT_BIT_FH_RX;
1442 if (inta_fh & CSR39_FH_INT_TX_MASK)
1443 inta |= CSR_INT_BIT_FH_TX;
1444
1445 /* Now service all interrupt bits discovered above. */
1446 if (inta & CSR_INT_BIT_HW_ERR) {
1447 IL_ERR("Hardware error detected. Restarting.\n");
1448
1449 /* Tell the device to stop sending interrupts */
1450 il_disable_interrupts(il);
1451
1452 il->isr_stats.hw++;
1453 il_irq_handle_error(il);
1454
1455 handled |= CSR_INT_BIT_HW_ERR;
1456
1457 return;
1458 }
1459 #ifdef CONFIG_IWLEGACY_DEBUG
1460 if (il_get_debug_level(il) & (IL_DL_ISR)) {
1461 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1462 if (inta & CSR_INT_BIT_SCD) {
1463 D_ISR("Scheduler finished to transmit "
1464 "the frame/frames.\n");
1465 il->isr_stats.sch++;
1466 }
1467
1468 /* Alive notification via Rx interrupt will do the real work */
1469 if (inta & CSR_INT_BIT_ALIVE) {
1470 D_ISR("Alive interrupt\n");
1471 il->isr_stats.alive++;
1472 }
1473 }
1474 #endif
1475 /* Safely ignore these bits for debug checks below */
1476 inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1477
1478 /* Error detected by uCode */
1479 if (inta & CSR_INT_BIT_SW_ERR) {
1480 IL_ERR("Microcode SW error detected. " "Restarting 0x%X.\n",
1481 inta);
1482 il->isr_stats.sw++;
1483 il_irq_handle_error(il);
1484 handled |= CSR_INT_BIT_SW_ERR;
1485 }
1486
1487 /* uCode wakes up after power-down sleep */
1488 if (inta & CSR_INT_BIT_WAKEUP) {
1489 D_ISR("Wakeup interrupt\n");
1490 il_rx_queue_update_write_ptr(il, &il->rxq);
1491
1492 spin_lock_irqsave(&il->lock, flags);
1493 il_txq_update_write_ptr(il, &il->txq[0]);
1494 il_txq_update_write_ptr(il, &il->txq[1]);
1495 il_txq_update_write_ptr(il, &il->txq[2]);
1496 il_txq_update_write_ptr(il, &il->txq[3]);
1497 il_txq_update_write_ptr(il, &il->txq[4]);
1498 spin_unlock_irqrestore(&il->lock, flags);
1499
1500 il->isr_stats.wakeup++;
1501 handled |= CSR_INT_BIT_WAKEUP;
1502 }
1503
1504 /* All uCode command responses, including Tx command responses,
1505 * Rx "responses" (frame-received notification), and other
1506 * notifications from uCode come through here*/
1507 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1508 il3945_rx_handle(il);
1509 il->isr_stats.rx++;
1510 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1511 }
1512
1513 if (inta & CSR_INT_BIT_FH_TX) {
1514 D_ISR("Tx interrupt\n");
1515 il->isr_stats.tx++;
1516
1517 _il_wr(il, CSR_FH_INT_STATUS, (1 << 6));
1518 il_wr(il, FH39_TCSR_CREDIT(FH39_SRVC_CHNL), 0x0);
1519 handled |= CSR_INT_BIT_FH_TX;
1520 }
1521
1522 if (inta & ~handled) {
1523 IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
1524 il->isr_stats.unhandled++;
1525 }
1526
1527 if (inta & ~il->inta_mask) {
1528 IL_WARN("Disabled INTA bits 0x%08x were pending\n",
1529 inta & ~il->inta_mask);
1530 IL_WARN(" with inta_fh = 0x%08x\n", inta_fh);
1531 }
1532
1533 /* Re-enable all interrupts */
1534 /* only Re-enable if disabled by irq */
1535 if (test_bit(S_INT_ENABLED, &il->status))
1536 il_enable_interrupts(il);
1537
1538 #ifdef CONFIG_IWLEGACY_DEBUG
1539 if (il_get_debug_level(il) & (IL_DL_ISR)) {
1540 inta = _il_rd(il, CSR_INT);
1541 inta_mask = _il_rd(il, CSR_INT_MASK);
1542 inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
1543 D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
1544 "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
1545 }
1546 #endif
1547 }
1548
1549 static int
1550 il3945_get_channels_for_scan(struct il_priv *il, enum nl80211_band band,
1551 u8 is_active, u8 n_probes,
1552 struct il3945_scan_channel *scan_ch,
1553 struct ieee80211_vif *vif)
1554 {
1555 struct ieee80211_channel *chan;
1556 const struct ieee80211_supported_band *sband;
1557 const struct il_channel_info *ch_info;
1558 u16 passive_dwell = 0;
1559 u16 active_dwell = 0;
1560 int added, i;
1561
1562 sband = il_get_hw_mode(il, band);
1563 if (!sband)
1564 return 0;
1565
1566 active_dwell = il_get_active_dwell_time(il, band, n_probes);
1567 passive_dwell = il_get_passive_dwell_time(il, band, vif);
1568
1569 if (passive_dwell <= active_dwell)
1570 passive_dwell = active_dwell + 1;
1571
1572 for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
1573 chan = il->scan_request->channels[i];
1574
1575 if (chan->band != band)
1576 continue;
1577
1578 scan_ch->channel = chan->hw_value;
1579
1580 ch_info = il_get_channel_info(il, band, scan_ch->channel);
1581 if (!il_is_channel_valid(ch_info)) {
1582 D_SCAN("Channel %d is INVALID for this band.\n",
1583 scan_ch->channel);
1584 continue;
1585 }
1586
1587 scan_ch->active_dwell = cpu_to_le16(active_dwell);
1588 scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
1589 /* If passive , set up for auto-switch
1590 * and use long active_dwell time.
1591 */
1592 if (!is_active || il_is_channel_passive(ch_info) ||
1593 (chan->flags & IEEE80211_CHAN_NO_IR)) {
1594 scan_ch->type = 0; /* passive */
1595 if (IL_UCODE_API(il->ucode_ver) == 1)
1596 scan_ch->active_dwell =
1597 cpu_to_le16(passive_dwell - 1);
1598 } else {
1599 scan_ch->type = 1; /* active */
1600 }
1601
1602 /* Set direct probe bits. These may be used both for active
1603 * scan channels (probes gets sent right away),
1604 * or for passive channels (probes get se sent only after
1605 * hearing clear Rx packet).*/
1606 if (IL_UCODE_API(il->ucode_ver) >= 2) {
1607 if (n_probes)
1608 scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
1609 } else {
1610 /* uCode v1 does not allow setting direct probe bits on
1611 * passive channel. */
1612 if ((scan_ch->type & 1) && n_probes)
1613 scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
1614 }
1615
1616 /* Set txpower levels to defaults */
1617 scan_ch->tpc.dsp_atten = 110;
1618 /* scan_pwr_info->tpc.dsp_atten; */
1619
1620 /*scan_pwr_info->tpc.tx_gain; */
1621 if (band == NL80211_BAND_5GHZ)
1622 scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
1623 else {
1624 scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
1625 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
1626 * power level:
1627 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
1628 */
1629 }
1630
1631 D_SCAN("Scanning %d [%s %d]\n", scan_ch->channel,
1632 (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
1633 (scan_ch->type & 1) ? active_dwell : passive_dwell);
1634
1635 scan_ch++;
1636 added++;
1637 }
1638
1639 D_SCAN("total channels to scan %d\n", added);
1640 return added;
1641 }
1642
1643 static void
1644 il3945_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates)
1645 {
1646 int i;
1647
1648 for (i = 0; i < RATE_COUNT_LEGACY; i++) {
1649 rates[i].bitrate = il3945_rates[i].ieee * 5;
1650 rates[i].hw_value = i; /* Rate scaling will work on idxes */
1651 rates[i].hw_value_short = i;
1652 rates[i].flags = 0;
1653 if (i > IL39_LAST_OFDM_RATE || i < IL_FIRST_OFDM_RATE) {
1654 /*
1655 * If CCK != 1M then set short preamble rate flag.
1656 */
1657 rates[i].flags |=
1658 (il3945_rates[i].plcp ==
1659 10) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE;
1660 }
1661 }
1662 }
1663
1664 /******************************************************************************
1665 *
1666 * uCode download functions
1667 *
1668 ******************************************************************************/
1669
1670 static void
1671 il3945_dealloc_ucode_pci(struct il_priv *il)
1672 {
1673 il_free_fw_desc(il->pci_dev, &il->ucode_code);
1674 il_free_fw_desc(il->pci_dev, &il->ucode_data);
1675 il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
1676 il_free_fw_desc(il->pci_dev, &il->ucode_init);
1677 il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
1678 il_free_fw_desc(il->pci_dev, &il->ucode_boot);
1679 }
1680
1681 /**
1682 * il3945_verify_inst_full - verify runtime uCode image in card vs. host,
1683 * looking at all data.
1684 */
1685 static int
1686 il3945_verify_inst_full(struct il_priv *il, __le32 * image, u32 len)
1687 {
1688 u32 val;
1689 u32 save_len = len;
1690 int rc = 0;
1691 u32 errcnt;
1692
1693 D_INFO("ucode inst image size is %u\n", len);
1694
1695 il_wr(il, HBUS_TARG_MEM_RADDR, IL39_RTC_INST_LOWER_BOUND);
1696
1697 errcnt = 0;
1698 for (; len > 0; len -= sizeof(u32), image++) {
1699 /* read data comes through single port, auto-incr addr */
1700 /* NOTE: Use the debugless read so we don't flood kernel log
1701 * if IL_DL_IO is set */
1702 val = _il_rd(il, HBUS_TARG_MEM_RDAT);
1703 if (val != le32_to_cpu(*image)) {
1704 IL_ERR("uCode INST section is invalid at "
1705 "offset 0x%x, is 0x%x, s/b 0x%x\n",
1706 save_len - len, val, le32_to_cpu(*image));
1707 rc = -EIO;
1708 errcnt++;
1709 if (errcnt >= 20)
1710 break;
1711 }
1712 }
1713
1714 if (!errcnt)
1715 D_INFO("ucode image in INSTRUCTION memory is good\n");
1716
1717 return rc;
1718 }
1719
1720 /**
1721 * il3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
1722 * using sample data 100 bytes apart. If these sample points are good,
1723 * it's a pretty good bet that everything between them is good, too.
1724 */
1725 static int
1726 il3945_verify_inst_sparse(struct il_priv *il, __le32 * image, u32 len)
1727 {
1728 u32 val;
1729 int rc = 0;
1730 u32 errcnt = 0;
1731 u32 i;
1732
1733 D_INFO("ucode inst image size is %u\n", len);
1734
1735 for (i = 0; i < len; i += 100, image += 100 / sizeof(u32)) {
1736 /* read data comes through single port, auto-incr addr */
1737 /* NOTE: Use the debugless read so we don't flood kernel log
1738 * if IL_DL_IO is set */
1739 il_wr(il, HBUS_TARG_MEM_RADDR, i + IL39_RTC_INST_LOWER_BOUND);
1740 val = _il_rd(il, HBUS_TARG_MEM_RDAT);
1741 if (val != le32_to_cpu(*image)) {
1742 #if 0 /* Enable this if you want to see details */
1743 IL_ERR("uCode INST section is invalid at "
1744 "offset 0x%x, is 0x%x, s/b 0x%x\n", i, val,
1745 *image);
1746 #endif
1747 rc = -EIO;
1748 errcnt++;
1749 if (errcnt >= 3)
1750 break;
1751 }
1752 }
1753
1754 return rc;
1755 }
1756
1757 /**
1758 * il3945_verify_ucode - determine which instruction image is in SRAM,
1759 * and verify its contents
1760 */
1761 static int
1762 il3945_verify_ucode(struct il_priv *il)
1763 {
1764 __le32 *image;
1765 u32 len;
1766 int rc = 0;
1767
1768 /* Try bootstrap */
1769 image = (__le32 *) il->ucode_boot.v_addr;
1770 len = il->ucode_boot.len;
1771 rc = il3945_verify_inst_sparse(il, image, len);
1772 if (rc == 0) {
1773 D_INFO("Bootstrap uCode is good in inst SRAM\n");
1774 return 0;
1775 }
1776
1777 /* Try initialize */
1778 image = (__le32 *) il->ucode_init.v_addr;
1779 len = il->ucode_init.len;
1780 rc = il3945_verify_inst_sparse(il, image, len);
1781 if (rc == 0) {
1782 D_INFO("Initialize uCode is good in inst SRAM\n");
1783 return 0;
1784 }
1785
1786 /* Try runtime/protocol */
1787 image = (__le32 *) il->ucode_code.v_addr;
1788 len = il->ucode_code.len;
1789 rc = il3945_verify_inst_sparse(il, image, len);
1790 if (rc == 0) {
1791 D_INFO("Runtime uCode is good in inst SRAM\n");
1792 return 0;
1793 }
1794
1795 IL_ERR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
1796
1797 /* Since nothing seems to match, show first several data entries in
1798 * instruction SRAM, so maybe visual inspection will give a clue.
1799 * Selection of bootstrap image (vs. other images) is arbitrary. */
1800 image = (__le32 *) il->ucode_boot.v_addr;
1801 len = il->ucode_boot.len;
1802 rc = il3945_verify_inst_full(il, image, len);
1803
1804 return rc;
1805 }
1806
1807 static void
1808 il3945_nic_start(struct il_priv *il)
1809 {
1810 /* Remove all resets to allow NIC to operate */
1811 _il_wr(il, CSR_RESET, 0);
1812 }
1813
1814 #define IL3945_UCODE_GET(item) \
1815 static u32 il3945_ucode_get_##item(const struct il_ucode_header *ucode)\
1816 { \
1817 return le32_to_cpu(ucode->v1.item); \
1818 }
1819
1820 static u32
1821 il3945_ucode_get_header_size(u32 api_ver)
1822 {
1823 return 24;
1824 }
1825
1826 static u8 *
1827 il3945_ucode_get_data(const struct il_ucode_header *ucode)
1828 {
1829 return (u8 *) ucode->v1.data;
1830 }
1831
1832 IL3945_UCODE_GET(inst_size);
1833 IL3945_UCODE_GET(data_size);
1834 IL3945_UCODE_GET(init_size);
1835 IL3945_UCODE_GET(init_data_size);
1836 IL3945_UCODE_GET(boot_size);
1837
1838 /**
1839 * il3945_read_ucode - Read uCode images from disk file.
1840 *
1841 * Copy into buffers for card to fetch via bus-mastering
1842 */
1843 static int
1844 il3945_read_ucode(struct il_priv *il)
1845 {
1846 const struct il_ucode_header *ucode;
1847 int ret = -EINVAL, idx;
1848 const struct firmware *ucode_raw;
1849 /* firmware file name contains uCode/driver compatibility version */
1850 const char *name_pre = il->cfg->fw_name_pre;
1851 const unsigned int api_max = il->cfg->ucode_api_max;
1852 const unsigned int api_min = il->cfg->ucode_api_min;
1853 char buf[25];
1854 u8 *src;
1855 size_t len;
1856 u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
1857
1858 /* Ask kernel firmware_class module to get the boot firmware off disk.
1859 * request_firmware() is synchronous, file is in memory on return. */
1860 for (idx = api_max; idx >= api_min; idx--) {
1861 sprintf(buf, "%s%u%s", name_pre, idx, ".ucode");
1862 ret = request_firmware(&ucode_raw, buf, &il->pci_dev->dev);
1863 if (ret < 0) {
1864 IL_ERR("%s firmware file req failed: %d\n", buf, ret);
1865 if (ret == -ENOENT)
1866 continue;
1867 else
1868 goto error;
1869 } else {
1870 if (idx < api_max)
1871 IL_ERR("Loaded firmware %s, "
1872 "which is deprecated. "
1873 " Please use API v%u instead.\n", buf,
1874 api_max);
1875 D_INFO("Got firmware '%s' file "
1876 "(%zd bytes) from disk\n", buf, ucode_raw->size);
1877 break;
1878 }
1879 }
1880
1881 if (ret < 0)
1882 goto error;
1883
1884 /* Make sure that we got at least our header! */
1885 if (ucode_raw->size < il3945_ucode_get_header_size(1)) {
1886 IL_ERR("File size way too small!\n");
1887 ret = -EINVAL;
1888 goto err_release;
1889 }
1890
1891 /* Data from ucode file: header followed by uCode images */
1892 ucode = (struct il_ucode_header *)ucode_raw->data;
1893
1894 il->ucode_ver = le32_to_cpu(ucode->ver);
1895 api_ver = IL_UCODE_API(il->ucode_ver);
1896 inst_size = il3945_ucode_get_inst_size(ucode);
1897 data_size = il3945_ucode_get_data_size(ucode);
1898 init_size = il3945_ucode_get_init_size(ucode);
1899 init_data_size = il3945_ucode_get_init_data_size(ucode);
1900 boot_size = il3945_ucode_get_boot_size(ucode);
1901 src = il3945_ucode_get_data(ucode);
1902
1903 /* api_ver should match the api version forming part of the
1904 * firmware filename ... but we don't check for that and only rely
1905 * on the API version read from firmware header from here on forward */
1906
1907 if (api_ver < api_min || api_ver > api_max) {
1908 IL_ERR("Driver unable to support your firmware API. "
1909 "Driver supports v%u, firmware is v%u.\n", api_max,
1910 api_ver);
1911 il->ucode_ver = 0;
1912 ret = -EINVAL;
1913 goto err_release;
1914 }
1915 if (api_ver != api_max)
1916 IL_ERR("Firmware has old API version. Expected %u, "
1917 "got %u. New firmware can be obtained "
1918 "from http://www.intellinuxwireless.org.\n", api_max,
1919 api_ver);
1920
1921 IL_INFO("loaded firmware version %u.%u.%u.%u\n",
1922 IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver),
1923 IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver));
1924
1925 snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version),
1926 "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver),
1927 IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver),
1928 IL_UCODE_SERIAL(il->ucode_ver));
1929
1930 D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver);
1931 D_INFO("f/w package hdr runtime inst size = %u\n", inst_size);
1932 D_INFO("f/w package hdr runtime data size = %u\n", data_size);
1933 D_INFO("f/w package hdr init inst size = %u\n", init_size);
1934 D_INFO("f/w package hdr init data size = %u\n", init_data_size);
1935 D_INFO("f/w package hdr boot inst size = %u\n", boot_size);
1936
1937 /* Verify size of file vs. image size info in file's header */
1938 if (ucode_raw->size !=
1939 il3945_ucode_get_header_size(api_ver) + inst_size + data_size +
1940 init_size + init_data_size + boot_size) {
1941
1942 D_INFO("uCode file size %zd does not match expected size\n",
1943 ucode_raw->size);
1944 ret = -EINVAL;
1945 goto err_release;
1946 }
1947
1948 /* Verify that uCode images will fit in card's SRAM */
1949 if (inst_size > IL39_MAX_INST_SIZE) {
1950 D_INFO("uCode instr len %d too large to fit in\n", inst_size);
1951 ret = -EINVAL;
1952 goto err_release;
1953 }
1954
1955 if (data_size > IL39_MAX_DATA_SIZE) {
1956 D_INFO("uCode data len %d too large to fit in\n", data_size);
1957 ret = -EINVAL;
1958 goto err_release;
1959 }
1960 if (init_size > IL39_MAX_INST_SIZE) {
1961 D_INFO("uCode init instr len %d too large to fit in\n",
1962 init_size);
1963 ret = -EINVAL;
1964 goto err_release;
1965 }
1966 if (init_data_size > IL39_MAX_DATA_SIZE) {
1967 D_INFO("uCode init data len %d too large to fit in\n",
1968 init_data_size);
1969 ret = -EINVAL;
1970 goto err_release;
1971 }
1972 if (boot_size > IL39_MAX_BSM_SIZE) {
1973 D_INFO("uCode boot instr len %d too large to fit in\n",
1974 boot_size);
1975 ret = -EINVAL;
1976 goto err_release;
1977 }
1978
1979 /* Allocate ucode buffers for card's bus-master loading ... */
1980
1981 /* Runtime instructions and 2 copies of data:
1982 * 1) unmodified from disk
1983 * 2) backup cache for save/restore during power-downs */
1984 il->ucode_code.len = inst_size;
1985 il_alloc_fw_desc(il->pci_dev, &il->ucode_code);
1986
1987 il->ucode_data.len = data_size;
1988 il_alloc_fw_desc(il->pci_dev, &il->ucode_data);
1989
1990 il->ucode_data_backup.len = data_size;
1991 il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);
1992
1993 if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
1994 !il->ucode_data_backup.v_addr)
1995 goto err_pci_alloc;
1996
1997 /* Initialization instructions and data */
1998 if (init_size && init_data_size) {
1999 il->ucode_init.len = init_size;
2000 il_alloc_fw_desc(il->pci_dev, &il->ucode_init);
2001
2002 il->ucode_init_data.len = init_data_size;
2003 il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);
2004
2005 if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
2006 goto err_pci_alloc;
2007 }
2008
2009 /* Bootstrap (instructions only, no data) */
2010 if (boot_size) {
2011 il->ucode_boot.len = boot_size;
2012 il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);
2013
2014 if (!il->ucode_boot.v_addr)
2015 goto err_pci_alloc;
2016 }
2017
2018 /* Copy images into buffers for card's bus-master reads ... */
2019
2020 /* Runtime instructions (first block of data in file) */
2021 len = inst_size;
2022 D_INFO("Copying (but not loading) uCode instr len %zd\n", len);
2023 memcpy(il->ucode_code.v_addr, src, len);
2024 src += len;
2025
2026 D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
2027 il->ucode_code.v_addr, (u32) il->ucode_code.p_addr);
2028
2029 /* Runtime data (2nd block)
2030 * NOTE: Copy into backup buffer will be done in il3945_up() */
2031 len = data_size;
2032 D_INFO("Copying (but not loading) uCode data len %zd\n", len);
2033 memcpy(il->ucode_data.v_addr, src, len);
2034 memcpy(il->ucode_data_backup.v_addr, src, len);
2035 src += len;
2036
2037 /* Initialization instructions (3rd block) */
2038 if (init_size) {
2039 len = init_size;
2040 D_INFO("Copying (but not loading) init instr len %zd\n", len);
2041 memcpy(il->ucode_init.v_addr, src, len);
2042 src += len;
2043 }
2044
2045 /* Initialization data (4th block) */
2046 if (init_data_size) {
2047 len = init_data_size;
2048 D_INFO("Copying (but not loading) init data len %zd\n", len);
2049 memcpy(il->ucode_init_data.v_addr, src, len);
2050 src += len;
2051 }
2052
2053 /* Bootstrap instructions (5th block) */
2054 len = boot_size;
2055 D_INFO("Copying (but not loading) boot instr len %zd\n", len);
2056 memcpy(il->ucode_boot.v_addr, src, len);
2057
2058 /* We have our copies now, allow OS release its copies */
2059 release_firmware(ucode_raw);
2060 return 0;
2061
2062 err_pci_alloc:
2063 IL_ERR("failed to allocate pci memory\n");
2064 ret = -ENOMEM;
2065 il3945_dealloc_ucode_pci(il);
2066
2067 err_release:
2068 release_firmware(ucode_raw);
2069
2070 error:
2071 return ret;
2072 }
2073
2074 /**
2075 * il3945_set_ucode_ptrs - Set uCode address location
2076 *
2077 * Tell initialization uCode where to find runtime uCode.
2078 *
2079 * BSM registers initially contain pointers to initialization uCode.
2080 * We need to replace them to load runtime uCode inst and data,
2081 * and to save runtime data when powering down.
2082 */
2083 static int
2084 il3945_set_ucode_ptrs(struct il_priv *il)
2085 {
2086 dma_addr_t pinst;
2087 dma_addr_t pdata;
2088
2089 /* bits 31:0 for 3945 */
2090 pinst = il->ucode_code.p_addr;
2091 pdata = il->ucode_data_backup.p_addr;
2092
2093 /* Tell bootstrap uCode where to find image to load */
2094 il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
2095 il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
2096 il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, il->ucode_data.len);
2097
2098 /* Inst byte count must be last to set up, bit 31 signals uCode
2099 * that all new ptr/size info is in place */
2100 il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
2101 il->ucode_code.len | BSM_DRAM_INST_LOAD);
2102
2103 D_INFO("Runtime uCode pointers are set.\n");
2104
2105 return 0;
2106 }
2107
2108 /**
2109 * il3945_init_alive_start - Called after N_ALIVE notification received
2110 *
2111 * Called after N_ALIVE notification received from "initialize" uCode.
2112 *
2113 * Tell "initialize" uCode to go ahead and load the runtime uCode.
2114 */
2115 static void
2116 il3945_init_alive_start(struct il_priv *il)
2117 {
2118 /* Check alive response for "valid" sign from uCode */
2119 if (il->card_alive_init.is_valid != UCODE_VALID_OK) {
2120 /* We had an error bringing up the hardware, so take it
2121 * all the way back down so we can try again */
2122 D_INFO("Initialize Alive failed.\n");
2123 goto restart;
2124 }
2125
2126 /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
2127 * This is a paranoid check, because we would not have gotten the
2128 * "initialize" alive if code weren't properly loaded. */
2129 if (il3945_verify_ucode(il)) {
2130 /* Runtime instruction load was bad;
2131 * take it all the way back down so we can try again */
2132 D_INFO("Bad \"initialize\" uCode load.\n");
2133 goto restart;
2134 }
2135
2136 /* Send pointers to protocol/runtime uCode image ... init code will
2137 * load and launch runtime uCode, which will send us another "Alive"
2138 * notification. */
2139 D_INFO("Initialization Alive received.\n");
2140 if (il3945_set_ucode_ptrs(il)) {
2141 /* Runtime instruction load won't happen;
2142 * take it all the way back down so we can try again */
2143 D_INFO("Couldn't set up uCode pointers.\n");
2144 goto restart;
2145 }
2146 return;
2147
2148 restart:
2149 queue_work(il->workqueue, &il->restart);
2150 }
2151
2152 /**
2153 * il3945_alive_start - called after N_ALIVE notification received
2154 * from protocol/runtime uCode (initialization uCode's
2155 * Alive gets handled by il3945_init_alive_start()).
2156 */
2157 static void
2158 il3945_alive_start(struct il_priv *il)
2159 {
2160 int thermal_spin = 0;
2161 u32 rfkill;
2162
2163 D_INFO("Runtime Alive received.\n");
2164
2165 if (il->card_alive.is_valid != UCODE_VALID_OK) {
2166 /* We had an error bringing up the hardware, so take it
2167 * all the way back down so we can try again */
2168 D_INFO("Alive failed.\n");
2169 goto restart;
2170 }
2171
2172 /* Initialize uCode has loaded Runtime uCode ... verify inst image.
2173 * This is a paranoid check, because we would not have gotten the
2174 * "runtime" alive if code weren't properly loaded. */
2175 if (il3945_verify_ucode(il)) {
2176 /* Runtime instruction load was bad;
2177 * take it all the way back down so we can try again */
2178 D_INFO("Bad runtime uCode load.\n");
2179 goto restart;
2180 }
2181
2182 rfkill = il_rd_prph(il, APMG_RFKILL_REG);
2183 D_INFO("RFKILL status: 0x%x\n", rfkill);
2184
2185 if (rfkill & 0x1) {
2186 clear_bit(S_RFKILL, &il->status);
2187 /* if RFKILL is not on, then wait for thermal
2188 * sensor in adapter to kick in */
2189 while (il3945_hw_get_temperature(il) == 0) {
2190 thermal_spin++;
2191 udelay(10);
2192 }
2193
2194 if (thermal_spin)
2195 D_INFO("Thermal calibration took %dus\n",
2196 thermal_spin * 10);
2197 } else
2198 set_bit(S_RFKILL, &il->status);
2199
2200 /* After the ALIVE response, we can send commands to 3945 uCode */
2201 set_bit(S_ALIVE, &il->status);
2202
2203 /* Enable watchdog to monitor the driver tx queues */
2204 il_setup_watchdog(il);
2205
2206 if (il_is_rfkill(il))
2207 return;
2208
2209 ieee80211_wake_queues(il->hw);
2210
2211 il->active_rate = RATES_MASK_3945;
2212
2213 il_power_update_mode(il, true);
2214
2215 if (il_is_associated(il)) {
2216 struct il3945_rxon_cmd *active_rxon =
2217 (struct il3945_rxon_cmd *)(&il->active);
2218
2219 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2220 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2221 } else {
2222 /* Initialize our rx_config data */
2223 il_connection_init_rx_config(il);
2224 }
2225
2226 /* Configure Bluetooth device coexistence support */
2227 il_send_bt_config(il);
2228
2229 set_bit(S_READY, &il->status);
2230
2231 /* Configure the adapter for unassociated operation */
2232 il3945_commit_rxon(il);
2233
2234 il3945_reg_txpower_periodic(il);
2235
2236 D_INFO("ALIVE processing complete.\n");
2237 wake_up(&il->wait_command_queue);
2238
2239 return;
2240
2241 restart:
2242 queue_work(il->workqueue, &il->restart);
2243 }
2244
2245 static void il3945_cancel_deferred_work(struct il_priv *il);
2246
2247 static void
2248 __il3945_down(struct il_priv *il)
2249 {
2250 unsigned long flags;
2251 int exit_pending;
2252
2253 D_INFO(DRV_NAME " is going down\n");
2254
2255 il_scan_cancel_timeout(il, 200);
2256
2257 exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status);
2258
2259 /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set
2260 * to prevent rearm timer */
2261 del_timer_sync(&il->watchdog);
2262
2263 /* Station information will now be cleared in device */
2264 il_clear_ucode_stations(il);
2265 il_dealloc_bcast_stations(il);
2266 il_clear_driver_stations(il);
2267
2268 /* Unblock any waiting calls */
2269 wake_up_all(&il->wait_command_queue);
2270
2271 /* Wipe out the EXIT_PENDING status bit if we are not actually
2272 * exiting the module */
2273 if (!exit_pending)
2274 clear_bit(S_EXIT_PENDING, &il->status);
2275
2276 /* stop and reset the on-board processor */
2277 _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
2278
2279 /* tell the device to stop sending interrupts */
2280 spin_lock_irqsave(&il->lock, flags);
2281 il_disable_interrupts(il);
2282 spin_unlock_irqrestore(&il->lock, flags);
2283 il3945_synchronize_irq(il);
2284
2285 if (il->mac80211_registered)
2286 ieee80211_stop_queues(il->hw);
2287
2288 /* If we have not previously called il3945_init() then
2289 * clear all bits but the RF Kill bits and return */
2290 if (!il_is_init(il)) {
2291 il->status =
2292 test_bit(S_RFKILL, &il->status) << S_RFKILL |
2293 test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
2294 test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
2295 goto exit;
2296 }
2297
2298 /* ...otherwise clear out all the status bits but the RF Kill
2299 * bit and continue taking the NIC down. */
2300 il->status &=
2301 test_bit(S_RFKILL, &il->status) << S_RFKILL |
2302 test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
2303 test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR |
2304 test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
2305
2306 /*
2307 * We disabled and synchronized interrupt, and priv->mutex is taken, so
2308 * here is the only thread which will program device registers, but
2309 * still have lockdep assertions, so we are taking reg_lock.
2310 */
2311 spin_lock_irq(&il->reg_lock);
2312 /* FIXME: il_grab_nic_access if rfkill is off ? */
2313
2314 il3945_hw_txq_ctx_stop(il);
2315 il3945_hw_rxq_stop(il);
2316 /* Power-down device's busmaster DMA clocks */
2317 _il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
2318 udelay(5);
2319 /* Stop the device, and put it in low power state */
2320 _il_apm_stop(il);
2321
2322 spin_unlock_irq(&il->reg_lock);
2323
2324 il3945_hw_txq_ctx_free(il);
2325 exit:
2326 memset(&il->card_alive, 0, sizeof(struct il_alive_resp));
2327
2328 if (il->beacon_skb)
2329 dev_kfree_skb(il->beacon_skb);
2330 il->beacon_skb = NULL;
2331
2332 /* clear out any free frames */
2333 il3945_clear_free_frames(il);
2334 }
2335
2336 static void
2337 il3945_down(struct il_priv *il)
2338 {
2339 mutex_lock(&il->mutex);
2340 __il3945_down(il);
2341 mutex_unlock(&il->mutex);
2342
2343 il3945_cancel_deferred_work(il);
2344 }
2345
2346 #define MAX_HW_RESTARTS 5
2347
2348 static int
2349 il3945_alloc_bcast_station(struct il_priv *il)
2350 {
2351 unsigned long flags;
2352 u8 sta_id;
2353
2354 spin_lock_irqsave(&il->sta_lock, flags);
2355 sta_id = il_prep_station(il, il_bcast_addr, false, NULL);
2356 if (sta_id == IL_INVALID_STATION) {
2357 IL_ERR("Unable to prepare broadcast station\n");
2358 spin_unlock_irqrestore(&il->sta_lock, flags);
2359
2360 return -EINVAL;
2361 }
2362
2363 il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE;
2364 il->stations[sta_id].used |= IL_STA_BCAST;
2365 spin_unlock_irqrestore(&il->sta_lock, flags);
2366
2367 return 0;
2368 }
2369
2370 static int
2371 __il3945_up(struct il_priv *il)
2372 {
2373 int rc, i;
2374
2375 rc = il3945_alloc_bcast_station(il);
2376 if (rc)
2377 return rc;
2378
2379 if (test_bit(S_EXIT_PENDING, &il->status)) {
2380 IL_WARN("Exit pending; will not bring the NIC up\n");
2381 return -EIO;
2382 }
2383
2384 if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
2385 IL_ERR("ucode not available for device bring up\n");
2386 return -EIO;
2387 }
2388
2389 /* If platform's RF_KILL switch is NOT set to KILL */
2390 if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
2391 clear_bit(S_RFKILL, &il->status);
2392 else {
2393 set_bit(S_RFKILL, &il->status);
2394 return -ERFKILL;
2395 }
2396
2397 _il_wr(il, CSR_INT, 0xFFFFFFFF);
2398
2399 rc = il3945_hw_nic_init(il);
2400 if (rc) {
2401 IL_ERR("Unable to int nic\n");
2402 return rc;
2403 }
2404
2405 /* make sure rfkill handshake bits are cleared */
2406 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2407 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
2408
2409 /* clear (again), then enable host interrupts */
2410 _il_wr(il, CSR_INT, 0xFFFFFFFF);
2411 il_enable_interrupts(il);
2412
2413 /* really make sure rfkill handshake bits are cleared */
2414 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2415 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2416
2417 /* Copy original ucode data image from disk into backup cache.
2418 * This will be used to initialize the on-board processor's
2419 * data SRAM for a clean start when the runtime program first loads. */
2420 memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
2421 il->ucode_data.len);
2422
2423 /* We return success when we resume from suspend and rf_kill is on. */
2424 if (test_bit(S_RFKILL, &il->status))
2425 return 0;
2426
2427 for (i = 0; i < MAX_HW_RESTARTS; i++) {
2428
2429 /* load bootstrap state machine,
2430 * load bootstrap program into processor's memory,
2431 * prepare to load the "initialize" uCode */
2432 rc = il->ops->load_ucode(il);
2433
2434 if (rc) {
2435 IL_ERR("Unable to set up bootstrap uCode: %d\n", rc);
2436 continue;
2437 }
2438
2439 /* start card; "initialize" will load runtime ucode */
2440 il3945_nic_start(il);
2441
2442 D_INFO(DRV_NAME " is coming up\n");
2443
2444 return 0;
2445 }
2446
2447 set_bit(S_EXIT_PENDING, &il->status);
2448 __il3945_down(il);
2449 clear_bit(S_EXIT_PENDING, &il->status);
2450
2451 /* tried to restart and config the device for as long as our
2452 * patience could withstand */
2453 IL_ERR("Unable to initialize device after %d attempts.\n", i);
2454 return -EIO;
2455 }
2456
2457 /*****************************************************************************
2458 *
2459 * Workqueue callbacks
2460 *
2461 *****************************************************************************/
2462
2463 static void
2464 il3945_bg_init_alive_start(struct work_struct *data)
2465 {
2466 struct il_priv *il =
2467 container_of(data, struct il_priv, init_alive_start.work);
2468
2469 mutex_lock(&il->mutex);
2470 if (test_bit(S_EXIT_PENDING, &il->status))
2471 goto out;
2472
2473 il3945_init_alive_start(il);
2474 out:
2475 mutex_unlock(&il->mutex);
2476 }
2477
2478 static void
2479 il3945_bg_alive_start(struct work_struct *data)
2480 {
2481 struct il_priv *il =
2482 container_of(data, struct il_priv, alive_start.work);
2483
2484 mutex_lock(&il->mutex);
2485 if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL)
2486 goto out;
2487
2488 il3945_alive_start(il);
2489 out:
2490 mutex_unlock(&il->mutex);
2491 }
2492
2493 /*
2494 * 3945 cannot interrupt driver when hardware rf kill switch toggles;
2495 * driver must poll CSR_GP_CNTRL_REG register for change. This register
2496 * *is* readable even when device has been SW_RESET into low power mode
2497 * (e.g. during RF KILL).
2498 */
2499 static void
2500 il3945_rfkill_poll(struct work_struct *data)
2501 {
2502 struct il_priv *il =
2503 container_of(data, struct il_priv, _3945.rfkill_poll.work);
2504 bool old_rfkill = test_bit(S_RFKILL, &il->status);
2505 bool new_rfkill =
2506 !(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
2507
2508 if (new_rfkill != old_rfkill) {
2509 if (new_rfkill)
2510 set_bit(S_RFKILL, &il->status);
2511 else
2512 clear_bit(S_RFKILL, &il->status);
2513
2514 wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill);
2515
2516 D_RF_KILL("RF_KILL bit toggled to %s.\n",
2517 new_rfkill ? "disable radio" : "enable radio");
2518 }
2519
2520 /* Keep this running, even if radio now enabled. This will be
2521 * cancelled in mac_start() if system decides to start again */
2522 queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
2523 round_jiffies_relative(2 * HZ));
2524
2525 }
2526
2527 int
2528 il3945_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
2529 {
2530 struct il_host_cmd cmd = {
2531 .id = C_SCAN,
2532 .len = sizeof(struct il3945_scan_cmd),
2533 .flags = CMD_SIZE_HUGE,
2534 };
2535 struct il3945_scan_cmd *scan;
2536 u8 n_probes = 0;
2537 enum nl80211_band band;
2538 bool is_active = false;
2539 int ret;
2540 u16 len;
2541
2542 lockdep_assert_held(&il->mutex);
2543
2544 if (!il->scan_cmd) {
2545 il->scan_cmd =
2546 kmalloc(sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE,
2547 GFP_KERNEL);
2548 if (!il->scan_cmd) {
2549 D_SCAN("Fail to allocate scan memory\n");
2550 return -ENOMEM;
2551 }
2552 }
2553 scan = il->scan_cmd;
2554 memset(scan, 0, sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE);
2555
2556 scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
2557 scan->quiet_time = IL_ACTIVE_QUIET_TIME;
2558
2559 if (il_is_associated(il)) {
2560 u16 interval;
2561 u32 extra;
2562 u32 suspend_time = 100;
2563 u32 scan_suspend_time = 100;
2564
2565 D_INFO("Scanning while associated...\n");
2566
2567 interval = vif->bss_conf.beacon_int;
2568
2569 scan->suspend_time = 0;
2570 scan->max_out_time = cpu_to_le32(200 * 1024);
2571 if (!interval)
2572 interval = suspend_time;
2573 /*
2574 * suspend time format:
2575 * 0-19: beacon interval in usec (time before exec.)
2576 * 20-23: 0
2577 * 24-31: number of beacons (suspend between channels)
2578 */
2579
2580 extra = (suspend_time / interval) << 24;
2581 scan_suspend_time =
2582 0xFF0FFFFF & (extra | ((suspend_time % interval) * 1024));
2583
2584 scan->suspend_time = cpu_to_le32(scan_suspend_time);
2585 D_SCAN("suspend_time 0x%X beacon interval %d\n",
2586 scan_suspend_time, interval);
2587 }
2588
2589 if (il->scan_request->n_ssids) {
2590 int i, p = 0;
2591 D_SCAN("Kicking off active scan\n");
2592 for (i = 0; i < il->scan_request->n_ssids; i++) {
2593 /* always does wildcard anyway */
2594 if (!il->scan_request->ssids[i].ssid_len)
2595 continue;
2596 scan->direct_scan[p].id = WLAN_EID_SSID;
2597 scan->direct_scan[p].len =
2598 il->scan_request->ssids[i].ssid_len;
2599 memcpy(scan->direct_scan[p].ssid,
2600 il->scan_request->ssids[i].ssid,
2601 il->scan_request->ssids[i].ssid_len);
2602 n_probes++;
2603 p++;
2604 }
2605 is_active = true;
2606 } else
2607 D_SCAN("Kicking off passive scan.\n");
2608
2609 /* We don't build a direct scan probe request; the uCode will do
2610 * that based on the direct_mask added to each channel entry */
2611 scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
2612 scan->tx_cmd.sta_id = il->hw_params.bcast_id;
2613 scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2614
2615 /* flags + rate selection */
2616
2617 switch (il->scan_band) {
2618 case NL80211_BAND_2GHZ:
2619 scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
2620 scan->tx_cmd.rate = RATE_1M_PLCP;
2621 band = NL80211_BAND_2GHZ;
2622 break;
2623 case NL80211_BAND_5GHZ:
2624 scan->tx_cmd.rate = RATE_6M_PLCP;
2625 band = NL80211_BAND_5GHZ;
2626 break;
2627 default:
2628 IL_WARN("Invalid scan band\n");
2629 return -EIO;
2630 }
2631
2632 /*
2633 * If active scaning is requested but a certain channel is marked
2634 * passive, we can do active scanning if we detect transmissions. For
2635 * passive only scanning disable switching to active on any channel.
2636 */
2637 scan->good_CRC_th =
2638 is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER;
2639
2640 len =
2641 il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data,
2642 vif->addr, il->scan_request->ie,
2643 il->scan_request->ie_len,
2644 IL_MAX_SCAN_SIZE - sizeof(*scan));
2645 scan->tx_cmd.len = cpu_to_le16(len);
2646
2647 /* select Rx antennas */
2648 scan->flags |= il3945_get_antenna_flags(il);
2649
2650 scan->channel_count =
2651 il3945_get_channels_for_scan(il, band, is_active, n_probes,
2652 (void *)&scan->data[len], vif);
2653 if (scan->channel_count == 0) {
2654 D_SCAN("channel count %d\n", scan->channel_count);
2655 return -EIO;
2656 }
2657
2658 cmd.len +=
2659 le16_to_cpu(scan->tx_cmd.len) +
2660 scan->channel_count * sizeof(struct il3945_scan_channel);
2661 cmd.data = scan;
2662 scan->len = cpu_to_le16(cmd.len);
2663
2664 set_bit(S_SCAN_HW, &il->status);
2665 ret = il_send_cmd_sync(il, &cmd);
2666 if (ret)
2667 clear_bit(S_SCAN_HW, &il->status);
2668 return ret;
2669 }
2670
2671 void
2672 il3945_post_scan(struct il_priv *il)
2673 {
2674 /*
2675 * Since setting the RXON may have been deferred while
2676 * performing the scan, fire one off if needed
2677 */
2678 if (memcmp(&il->staging, &il->active, sizeof(il->staging)))
2679 il3945_commit_rxon(il);
2680 }
2681
2682 static void
2683 il3945_bg_restart(struct work_struct *data)
2684 {
2685 struct il_priv *il = container_of(data, struct il_priv, restart);
2686
2687 if (test_bit(S_EXIT_PENDING, &il->status))
2688 return;
2689
2690 if (test_and_clear_bit(S_FW_ERROR, &il->status)) {
2691 mutex_lock(&il->mutex);
2692 il->is_open = 0;
2693 mutex_unlock(&il->mutex);
2694 il3945_down(il);
2695 ieee80211_restart_hw(il->hw);
2696 } else {
2697 il3945_down(il);
2698
2699 mutex_lock(&il->mutex);
2700 if (test_bit(S_EXIT_PENDING, &il->status)) {
2701 mutex_unlock(&il->mutex);
2702 return;
2703 }
2704
2705 __il3945_up(il);
2706 mutex_unlock(&il->mutex);
2707 }
2708 }
2709
2710 static void
2711 il3945_bg_rx_replenish(struct work_struct *data)
2712 {
2713 struct il_priv *il = container_of(data, struct il_priv, rx_replenish);
2714
2715 mutex_lock(&il->mutex);
2716 if (test_bit(S_EXIT_PENDING, &il->status))
2717 goto out;
2718
2719 il3945_rx_replenish(il);
2720 out:
2721 mutex_unlock(&il->mutex);
2722 }
2723
2724 void
2725 il3945_post_associate(struct il_priv *il)
2726 {
2727 int rc = 0;
2728 struct ieee80211_conf *conf = NULL;
2729
2730 if (!il->vif || !il->is_open)
2731 return;
2732
2733 D_ASSOC("Associated as %d to: %pM\n", il->vif->bss_conf.aid,
2734 il->active.bssid_addr);
2735
2736 if (test_bit(S_EXIT_PENDING, &il->status))
2737 return;
2738
2739 il_scan_cancel_timeout(il, 200);
2740
2741 conf = &il->hw->conf;
2742
2743 il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2744 il3945_commit_rxon(il);
2745
2746 rc = il_send_rxon_timing(il);
2747 if (rc)
2748 IL_WARN("C_RXON_TIMING failed - " "Attempting to continue.\n");
2749
2750 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2751
2752 il->staging.assoc_id = cpu_to_le16(il->vif->bss_conf.aid);
2753
2754 D_ASSOC("assoc id %d beacon interval %d\n", il->vif->bss_conf.aid,
2755 il->vif->bss_conf.beacon_int);
2756
2757 if (il->vif->bss_conf.use_short_preamble)
2758 il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2759 else
2760 il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2761
2762 if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
2763 if (il->vif->bss_conf.use_short_slot)
2764 il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
2765 else
2766 il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2767 }
2768
2769 il3945_commit_rxon(il);
2770
2771 switch (il->vif->type) {
2772 case NL80211_IFTYPE_STATION:
2773 il3945_rate_scale_init(il->hw, IL_AP_ID);
2774 break;
2775 case NL80211_IFTYPE_ADHOC:
2776 il3945_send_beacon_cmd(il);
2777 break;
2778 default:
2779 IL_ERR("%s Should not be called in %d mode\n", __func__,
2780 il->vif->type);
2781 break;
2782 }
2783 }
2784
2785 /*****************************************************************************
2786 *
2787 * mac80211 entry point functions
2788 *
2789 *****************************************************************************/
2790
2791 #define UCODE_READY_TIMEOUT (2 * HZ)
2792
2793 static int
2794 il3945_mac_start(struct ieee80211_hw *hw)
2795 {
2796 struct il_priv *il = hw->priv;
2797 int ret;
2798
2799 /* we should be verifying the device is ready to be opened */
2800 mutex_lock(&il->mutex);
2801 D_MAC80211("enter\n");
2802
2803 /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
2804 * ucode filename and max sizes are card-specific. */
2805
2806 if (!il->ucode_code.len) {
2807 ret = il3945_read_ucode(il);
2808 if (ret) {
2809 IL_ERR("Could not read microcode: %d\n", ret);
2810 mutex_unlock(&il->mutex);
2811 goto out_release_irq;
2812 }
2813 }
2814
2815 ret = __il3945_up(il);
2816
2817 mutex_unlock(&il->mutex);
2818
2819 if (ret)
2820 goto out_release_irq;
2821
2822 D_INFO("Start UP work.\n");
2823
2824 /* Wait for START_ALIVE from ucode. Otherwise callbacks from
2825 * mac80211 will not be run successfully. */
2826 ret = wait_event_timeout(il->wait_command_queue,
2827 test_bit(S_READY, &il->status),
2828 UCODE_READY_TIMEOUT);
2829 if (!ret) {
2830 if (!test_bit(S_READY, &il->status)) {
2831 IL_ERR("Wait for START_ALIVE timeout after %dms.\n",
2832 jiffies_to_msecs(UCODE_READY_TIMEOUT));
2833 ret = -ETIMEDOUT;
2834 goto out_release_irq;
2835 }
2836 }
2837
2838 /* ucode is running and will send rfkill notifications,
2839 * no need to poll the killswitch state anymore */
2840 cancel_delayed_work(&il->_3945.rfkill_poll);
2841
2842 il->is_open = 1;
2843 D_MAC80211("leave\n");
2844 return 0;
2845
2846 out_release_irq:
2847 il->is_open = 0;
2848 D_MAC80211("leave - failed\n");
2849 return ret;
2850 }
2851
2852 static void
2853 il3945_mac_stop(struct ieee80211_hw *hw)
2854 {
2855 struct il_priv *il = hw->priv;
2856
2857 D_MAC80211("enter\n");
2858
2859 if (!il->is_open) {
2860 D_MAC80211("leave - skip\n");
2861 return;
2862 }
2863
2864 il->is_open = 0;
2865
2866 il3945_down(il);
2867
2868 flush_workqueue(il->workqueue);
2869
2870 /* start polling the killswitch state again */
2871 queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
2872 round_jiffies_relative(2 * HZ));
2873
2874 D_MAC80211("leave\n");
2875 }
2876
2877 static void
2878 il3945_mac_tx(struct ieee80211_hw *hw,
2879 struct ieee80211_tx_control *control,
2880 struct sk_buff *skb)
2881 {
2882 struct il_priv *il = hw->priv;
2883
2884 D_MAC80211("enter\n");
2885
2886 D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
2887 ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
2888
2889 if (il3945_tx_skb(il, control->sta, skb))
2890 dev_kfree_skb_any(skb);
2891
2892 D_MAC80211("leave\n");
2893 }
2894
2895 void
2896 il3945_config_ap(struct il_priv *il)
2897 {
2898 struct ieee80211_vif *vif = il->vif;
2899 int rc = 0;
2900
2901 if (test_bit(S_EXIT_PENDING, &il->status))
2902 return;
2903
2904 /* The following should be done only at AP bring up */
2905 if (!(il_is_associated(il))) {
2906
2907 /* RXON - unassoc (to set timing command) */
2908 il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2909 il3945_commit_rxon(il);
2910
2911 /* RXON Timing */
2912 rc = il_send_rxon_timing(il);
2913 if (rc)
2914 IL_WARN("C_RXON_TIMING failed - "
2915 "Attempting to continue.\n");
2916
2917 il->staging.assoc_id = 0;
2918
2919 if (vif->bss_conf.use_short_preamble)
2920 il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2921 else
2922 il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2923
2924 if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
2925 if (vif->bss_conf.use_short_slot)
2926 il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
2927 else
2928 il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2929 }
2930 /* restore RXON assoc */
2931 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2932 il3945_commit_rxon(il);
2933 }
2934 il3945_send_beacon_cmd(il);
2935 }
2936
2937 static int
2938 il3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2939 struct ieee80211_vif *vif, struct ieee80211_sta *sta,
2940 struct ieee80211_key_conf *key)
2941 {
2942 struct il_priv *il = hw->priv;
2943 int ret = 0;
2944 u8 sta_id = IL_INVALID_STATION;
2945 u8 static_key;
2946
2947 D_MAC80211("enter\n");
2948
2949 if (il3945_mod_params.sw_crypto) {
2950 D_MAC80211("leave - hwcrypto disabled\n");
2951 return -EOPNOTSUPP;
2952 }
2953
2954 /*
2955 * To support IBSS RSN, don't program group keys in IBSS, the
2956 * hardware will then not attempt to decrypt the frames.
2957 */
2958 if (vif->type == NL80211_IFTYPE_ADHOC &&
2959 !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
2960 D_MAC80211("leave - IBSS RSN\n");
2961 return -EOPNOTSUPP;
2962 }
2963
2964 static_key = !il_is_associated(il);
2965
2966 if (!static_key) {
2967 sta_id = il_sta_id_or_broadcast(il, sta);
2968 if (sta_id == IL_INVALID_STATION) {
2969 D_MAC80211("leave - station not found\n");
2970 return -EINVAL;
2971 }
2972 }
2973
2974 mutex_lock(&il->mutex);
2975 il_scan_cancel_timeout(il, 100);
2976
2977 switch (cmd) {
2978 case SET_KEY:
2979 if (static_key)
2980 ret = il3945_set_static_key(il, key);
2981 else
2982 ret = il3945_set_dynamic_key(il, key, sta_id);
2983 D_MAC80211("enable hwcrypto key\n");
2984 break;
2985 case DISABLE_KEY:
2986 if (static_key)
2987 ret = il3945_remove_static_key(il);
2988 else
2989 ret = il3945_clear_sta_key_info(il, sta_id);
2990 D_MAC80211("disable hwcrypto key\n");
2991 break;
2992 default:
2993 ret = -EINVAL;
2994 }
2995
2996 D_MAC80211("leave ret %d\n", ret);
2997 mutex_unlock(&il->mutex);
2998
2999 return ret;
3000 }
3001
3002 static int
3003 il3945_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
3004 struct ieee80211_sta *sta)
3005 {
3006 struct il_priv *il = hw->priv;
3007 struct il3945_sta_priv *sta_priv = (void *)sta->drv_priv;
3008 int ret;
3009 bool is_ap = vif->type == NL80211_IFTYPE_STATION;
3010 u8 sta_id;
3011
3012 mutex_lock(&il->mutex);
3013 D_INFO("station %pM\n", sta->addr);
3014 sta_priv->common.sta_id = IL_INVALID_STATION;
3015
3016 ret = il_add_station_common(il, sta->addr, is_ap, sta, &sta_id);
3017 if (ret) {
3018 IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret);
3019 /* Should we return success if return code is EEXIST ? */
3020 mutex_unlock(&il->mutex);
3021 return ret;
3022 }
3023
3024 sta_priv->common.sta_id = sta_id;
3025
3026 /* Initialize rate scaling */
3027 D_INFO("Initializing rate scaling for station %pM\n", sta->addr);
3028 il3945_rs_rate_init(il, sta, sta_id);
3029 mutex_unlock(&il->mutex);
3030
3031 return 0;
3032 }
3033
3034 static void
3035 il3945_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
3036 unsigned int *total_flags, u64 multicast)
3037 {
3038 struct il_priv *il = hw->priv;
3039 __le32 filter_or = 0, filter_nand = 0;
3040
3041 #define CHK(test, flag) do { \
3042 if (*total_flags & (test)) \
3043 filter_or |= (flag); \
3044 else \
3045 filter_nand |= (flag); \
3046 } while (0)
3047
3048 D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags,
3049 *total_flags);
3050
3051 CHK(FIF_OTHER_BSS, RXON_FILTER_PROMISC_MSK);
3052 CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
3053 CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
3054
3055 #undef CHK
3056
3057 mutex_lock(&il->mutex);
3058
3059 il->staging.filter_flags &= ~filter_nand;
3060 il->staging.filter_flags |= filter_or;
3061
3062 /*
3063 * Not committing directly because hardware can perform a scan,
3064 * but even if hw is ready, committing here breaks for some reason,
3065 * we'll eventually commit the filter flags change anyway.
3066 */
3067
3068 mutex_unlock(&il->mutex);
3069
3070 /*
3071 * Receiving all multicast frames is always enabled by the
3072 * default flags setup in il_connection_init_rx_config()
3073 * since we currently do not support programming multicast
3074 * filters into the device.
3075 */
3076 *total_flags &=
3077 FIF_OTHER_BSS | FIF_ALLMULTI |
3078 FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
3079 }
3080
3081 /*****************************************************************************
3082 *
3083 * sysfs attributes
3084 *
3085 *****************************************************************************/
3086
3087 #ifdef CONFIG_IWLEGACY_DEBUG
3088
3089 /*
3090 * The following adds a new attribute to the sysfs representation
3091 * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
3092 * used for controlling the debug level.
3093 *
3094 * See the level definitions in iwl for details.
3095 *
3096 * The debug_level being managed using sysfs below is a per device debug
3097 * level that is used instead of the global debug level if it (the per
3098 * device debug level) is set.
3099 */
3100 static ssize_t
3101 il3945_show_debug_level(struct device *d, struct device_attribute *attr,
3102 char *buf)
3103 {
3104 struct il_priv *il = dev_get_drvdata(d);
3105 return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
3106 }
3107
3108 static ssize_t
3109 il3945_store_debug_level(struct device *d, struct device_attribute *attr,
3110 const char *buf, size_t count)
3111 {
3112 struct il_priv *il = dev_get_drvdata(d);
3113 unsigned long val;
3114 int ret;
3115
3116 ret = kstrtoul(buf, 0, &val);
3117 if (ret)
3118 IL_INFO("%s is not in hex or decimal form.\n", buf);
3119 else
3120 il->debug_level = val;
3121
3122 return strnlen(buf, count);
3123 }
3124
3125 static DEVICE_ATTR(debug_level, 0644, il3945_show_debug_level,
3126 il3945_store_debug_level);
3127
3128 #endif /* CONFIG_IWLEGACY_DEBUG */
3129
3130 static ssize_t
3131 il3945_show_temperature(struct device *d, struct device_attribute *attr,
3132 char *buf)
3133 {
3134 struct il_priv *il = dev_get_drvdata(d);
3135
3136 if (!il_is_alive(il))
3137 return -EAGAIN;
3138
3139 return sprintf(buf, "%d\n", il3945_hw_get_temperature(il));
3140 }
3141
3142 static DEVICE_ATTR(temperature, 0444, il3945_show_temperature, NULL);
3143
3144 static ssize_t
3145 il3945_show_tx_power(struct device *d, struct device_attribute *attr, char *buf)
3146 {
3147 struct il_priv *il = dev_get_drvdata(d);
3148 return sprintf(buf, "%d\n", il->tx_power_user_lmt);
3149 }
3150
3151 static ssize_t
3152 il3945_store_tx_power(struct device *d, struct device_attribute *attr,
3153 const char *buf, size_t count)
3154 {
3155 struct il_priv *il = dev_get_drvdata(d);
3156 char *p = (char *)buf;
3157 u32 val;
3158
3159 val = simple_strtoul(p, &p, 10);
3160 if (p == buf)
3161 IL_INFO(": %s is not in decimal form.\n", buf);
3162 else
3163 il3945_hw_reg_set_txpower(il, val);
3164
3165 return count;
3166 }
3167
3168 static DEVICE_ATTR(tx_power, 0644, il3945_show_tx_power, il3945_store_tx_power);
3169
3170 static ssize_t
3171 il3945_show_flags(struct device *d, struct device_attribute *attr, char *buf)
3172 {
3173 struct il_priv *il = dev_get_drvdata(d);
3174
3175 return sprintf(buf, "0x%04X\n", il->active.flags);
3176 }
3177
3178 static ssize_t
3179 il3945_store_flags(struct device *d, struct device_attribute *attr,
3180 const char *buf, size_t count)
3181 {
3182 struct il_priv *il = dev_get_drvdata(d);
3183 u32 flags = simple_strtoul(buf, NULL, 0);
3184
3185 mutex_lock(&il->mutex);
3186 if (le32_to_cpu(il->staging.flags) != flags) {
3187 /* Cancel any currently running scans... */
3188 if (il_scan_cancel_timeout(il, 100))
3189 IL_WARN("Could not cancel scan.\n");
3190 else {
3191 D_INFO("Committing rxon.flags = 0x%04X\n", flags);
3192 il->staging.flags = cpu_to_le32(flags);
3193 il3945_commit_rxon(il);
3194 }
3195 }
3196 mutex_unlock(&il->mutex);
3197
3198 return count;
3199 }
3200
3201 static DEVICE_ATTR(flags, 0644, il3945_show_flags, il3945_store_flags);
3202
3203 static ssize_t
3204 il3945_show_filter_flags(struct device *d, struct device_attribute *attr,
3205 char *buf)
3206 {
3207 struct il_priv *il = dev_get_drvdata(d);
3208
3209 return sprintf(buf, "0x%04X\n", le32_to_cpu(il->active.filter_flags));
3210 }
3211
3212 static ssize_t
3213 il3945_store_filter_flags(struct device *d, struct device_attribute *attr,
3214 const char *buf, size_t count)
3215 {
3216 struct il_priv *il = dev_get_drvdata(d);
3217 u32 filter_flags = simple_strtoul(buf, NULL, 0);
3218
3219 mutex_lock(&il->mutex);
3220 if (le32_to_cpu(il->staging.filter_flags) != filter_flags) {
3221 /* Cancel any currently running scans... */
3222 if (il_scan_cancel_timeout(il, 100))
3223 IL_WARN("Could not cancel scan.\n");
3224 else {
3225 D_INFO("Committing rxon.filter_flags = " "0x%04X\n",
3226 filter_flags);
3227 il->staging.filter_flags = cpu_to_le32(filter_flags);
3228 il3945_commit_rxon(il);
3229 }
3230 }
3231 mutex_unlock(&il->mutex);
3232
3233 return count;
3234 }
3235
3236 static DEVICE_ATTR(filter_flags, 0644, il3945_show_filter_flags,
3237 il3945_store_filter_flags);
3238
3239 static ssize_t
3240 il3945_show_measurement(struct device *d, struct device_attribute *attr,
3241 char *buf)
3242 {
3243 struct il_priv *il = dev_get_drvdata(d);
3244 struct il_spectrum_notification measure_report;
3245 u32 size = sizeof(measure_report), len = 0, ofs = 0;
3246 u8 *data = (u8 *) &measure_report;
3247 unsigned long flags;
3248
3249 spin_lock_irqsave(&il->lock, flags);
3250 if (!(il->measurement_status & MEASUREMENT_READY)) {
3251 spin_unlock_irqrestore(&il->lock, flags);
3252 return 0;
3253 }
3254 memcpy(&measure_report, &il->measure_report, size);
3255 il->measurement_status = 0;
3256 spin_unlock_irqrestore(&il->lock, flags);
3257
3258 while (size && PAGE_SIZE - len) {
3259 hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
3260 PAGE_SIZE - len, true);
3261 len = strlen(buf);
3262 if (PAGE_SIZE - len)
3263 buf[len++] = '\n';
3264
3265 ofs += 16;
3266 size -= min(size, 16U);
3267 }
3268
3269 return len;
3270 }
3271
3272 static ssize_t
3273 il3945_store_measurement(struct device *d, struct device_attribute *attr,
3274 const char *buf, size_t count)
3275 {
3276 struct il_priv *il = dev_get_drvdata(d);
3277 struct ieee80211_measurement_params params = {
3278 .channel = le16_to_cpu(il->active.channel),
3279 .start_time = cpu_to_le64(il->_3945.last_tsf),
3280 .duration = cpu_to_le16(1),
3281 };
3282 u8 type = IL_MEASURE_BASIC;
3283 u8 buffer[32];
3284 u8 channel;
3285
3286 if (count) {
3287 char *p = buffer;
3288 strlcpy(buffer, buf, sizeof(buffer));
3289 channel = simple_strtoul(p, NULL, 0);
3290 if (channel)
3291 params.channel = channel;
3292
3293 p = buffer;
3294 while (*p && *p != ' ')
3295 p++;
3296 if (*p)
3297 type = simple_strtoul(p + 1, NULL, 0);
3298 }
3299
3300 D_INFO("Invoking measurement of type %d on " "channel %d (for '%s')\n",
3301 type, params.channel, buf);
3302 il3945_get_measurement(il, &params, type);
3303
3304 return count;
3305 }
3306
3307 static DEVICE_ATTR(measurement, 0600, il3945_show_measurement,
3308 il3945_store_measurement);
3309
3310 static ssize_t
3311 il3945_store_retry_rate(struct device *d, struct device_attribute *attr,
3312 const char *buf, size_t count)
3313 {
3314 struct il_priv *il = dev_get_drvdata(d);
3315
3316 il->retry_rate = simple_strtoul(buf, NULL, 0);
3317 if (il->retry_rate <= 0)
3318 il->retry_rate = 1;
3319
3320 return count;
3321 }
3322
3323 static ssize_t
3324 il3945_show_retry_rate(struct device *d, struct device_attribute *attr,
3325 char *buf)
3326 {
3327 struct il_priv *il = dev_get_drvdata(d);
3328 return sprintf(buf, "%d", il->retry_rate);
3329 }
3330
3331 static DEVICE_ATTR(retry_rate, 0600, il3945_show_retry_rate,
3332 il3945_store_retry_rate);
3333
3334 static ssize_t
3335 il3945_show_channels(struct device *d, struct device_attribute *attr, char *buf)
3336 {
3337 /* all this shit doesn't belong into sysfs anyway */
3338 return 0;
3339 }
3340
3341 static DEVICE_ATTR(channels, 0400, il3945_show_channels, NULL);
3342
3343 static ssize_t
3344 il3945_show_antenna(struct device *d, struct device_attribute *attr, char *buf)
3345 {
3346 struct il_priv *il = dev_get_drvdata(d);
3347
3348 if (!il_is_alive(il))
3349 return -EAGAIN;
3350
3351 return sprintf(buf, "%d\n", il3945_mod_params.antenna);
3352 }
3353
3354 static ssize_t
3355 il3945_store_antenna(struct device *d, struct device_attribute *attr,
3356 const char *buf, size_t count)
3357 {
3358 struct il_priv *il __maybe_unused = dev_get_drvdata(d);
3359 int ant;
3360
3361 if (count == 0)
3362 return 0;
3363
3364 if (sscanf(buf, "%1i", &ant) != 1) {
3365 D_INFO("not in hex or decimal form.\n");
3366 return count;
3367 }
3368
3369 if (ant >= 0 && ant <= 2) {
3370 D_INFO("Setting antenna select to %d.\n", ant);
3371 il3945_mod_params.antenna = (enum il3945_antenna)ant;
3372 } else
3373 D_INFO("Bad antenna select value %d.\n", ant);
3374
3375 return count;
3376 }
3377
3378 static DEVICE_ATTR(antenna, 0644, il3945_show_antenna, il3945_store_antenna);
3379
3380 static ssize_t
3381 il3945_show_status(struct device *d, struct device_attribute *attr, char *buf)
3382 {
3383 struct il_priv *il = dev_get_drvdata(d);
3384 if (!il_is_alive(il))
3385 return -EAGAIN;
3386 return sprintf(buf, "0x%08x\n", (int)il->status);
3387 }
3388
3389 static DEVICE_ATTR(status, 0444, il3945_show_status, NULL);
3390
3391 static ssize_t
3392 il3945_dump_error_log(struct device *d, struct device_attribute *attr,
3393 const char *buf, size_t count)
3394 {
3395 struct il_priv *il = dev_get_drvdata(d);
3396 char *p = (char *)buf;
3397
3398 if (p[0] == '1')
3399 il3945_dump_nic_error_log(il);
3400
3401 return strnlen(buf, count);
3402 }
3403
3404 static DEVICE_ATTR(dump_errors, 0200, NULL, il3945_dump_error_log);
3405
3406 /*****************************************************************************
3407 *
3408 * driver setup and tear down
3409 *
3410 *****************************************************************************/
3411
3412 static void
3413 il3945_setup_deferred_work(struct il_priv *il)
3414 {
3415 il->workqueue = create_singlethread_workqueue(DRV_NAME);
3416
3417 init_waitqueue_head(&il->wait_command_queue);
3418
3419 INIT_WORK(&il->restart, il3945_bg_restart);
3420 INIT_WORK(&il->rx_replenish, il3945_bg_rx_replenish);
3421 INIT_DELAYED_WORK(&il->init_alive_start, il3945_bg_init_alive_start);
3422 INIT_DELAYED_WORK(&il->alive_start, il3945_bg_alive_start);
3423 INIT_DELAYED_WORK(&il->_3945.rfkill_poll, il3945_rfkill_poll);
3424
3425 il_setup_scan_deferred_work(il);
3426
3427 il3945_hw_setup_deferred_work(il);
3428
3429 timer_setup(&il->watchdog, il_bg_watchdog, 0);
3430
3431 tasklet_init(&il->irq_tasklet,
3432 (void (*)(unsigned long))il3945_irq_tasklet,
3433 (unsigned long)il);
3434 }
3435
3436 static void
3437 il3945_cancel_deferred_work(struct il_priv *il)
3438 {
3439 il3945_hw_cancel_deferred_work(il);
3440
3441 cancel_delayed_work_sync(&il->init_alive_start);
3442 cancel_delayed_work(&il->alive_start);
3443
3444 il_cancel_scan_deferred_work(il);
3445 }
3446
3447 static struct attribute *il3945_sysfs_entries[] = {
3448 &dev_attr_antenna.attr,
3449 &dev_attr_channels.attr,
3450 &dev_attr_dump_errors.attr,
3451 &dev_attr_flags.attr,
3452 &dev_attr_filter_flags.attr,
3453 &dev_attr_measurement.attr,
3454 &dev_attr_retry_rate.attr,
3455 &dev_attr_status.attr,
3456 &dev_attr_temperature.attr,
3457 &dev_attr_tx_power.attr,
3458 #ifdef CONFIG_IWLEGACY_DEBUG
3459 &dev_attr_debug_level.attr,
3460 #endif
3461 NULL
3462 };
3463
3464 static const struct attribute_group il3945_attribute_group = {
3465 .name = NULL, /* put in device directory */
3466 .attrs = il3945_sysfs_entries,
3467 };
3468
3469 static struct ieee80211_ops il3945_mac_ops __ro_after_init = {
3470 .tx = il3945_mac_tx,
3471 .start = il3945_mac_start,
3472 .stop = il3945_mac_stop,
3473 .add_interface = il_mac_add_interface,
3474 .remove_interface = il_mac_remove_interface,
3475 .change_interface = il_mac_change_interface,
3476 .config = il_mac_config,
3477 .configure_filter = il3945_configure_filter,
3478 .set_key = il3945_mac_set_key,
3479 .conf_tx = il_mac_conf_tx,
3480 .reset_tsf = il_mac_reset_tsf,
3481 .bss_info_changed = il_mac_bss_info_changed,
3482 .hw_scan = il_mac_hw_scan,
3483 .sta_add = il3945_mac_sta_add,
3484 .sta_remove = il_mac_sta_remove,
3485 .tx_last_beacon = il_mac_tx_last_beacon,
3486 .flush = il_mac_flush,
3487 };
3488
3489 static int
3490 il3945_init_drv(struct il_priv *il)
3491 {
3492 int ret;
3493 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
3494
3495 il->retry_rate = 1;
3496 il->beacon_skb = NULL;
3497
3498 spin_lock_init(&il->sta_lock);
3499 spin_lock_init(&il->hcmd_lock);
3500
3501 INIT_LIST_HEAD(&il->free_frames);
3502
3503 mutex_init(&il->mutex);
3504
3505 il->ieee_channels = NULL;
3506 il->ieee_rates = NULL;
3507 il->band = NL80211_BAND_2GHZ;
3508
3509 il->iw_mode = NL80211_IFTYPE_STATION;
3510 il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;
3511
3512 /* initialize force reset */
3513 il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;
3514
3515 if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
3516 IL_WARN("Unsupported EEPROM version: 0x%04X\n",
3517 eeprom->version);
3518 ret = -EINVAL;
3519 goto err;
3520 }
3521 ret = il_init_channel_map(il);
3522 if (ret) {
3523 IL_ERR("initializing regulatory failed: %d\n", ret);
3524 goto err;
3525 }
3526
3527 /* Set up txpower settings in driver for all channels */
3528 if (il3945_txpower_set_from_eeprom(il)) {
3529 ret = -EIO;
3530 goto err_free_channel_map;
3531 }
3532
3533 ret = il_init_geos(il);
3534 if (ret) {
3535 IL_ERR("initializing geos failed: %d\n", ret);
3536 goto err_free_channel_map;
3537 }
3538 il3945_init_hw_rates(il, il->ieee_rates);
3539
3540 return 0;
3541
3542 err_free_channel_map:
3543 il_free_channel_map(il);
3544 err:
3545 return ret;
3546 }
3547
3548 #define IL3945_MAX_PROBE_REQUEST 200
3549
3550 static int
3551 il3945_setup_mac(struct il_priv *il)
3552 {
3553 int ret;
3554 struct ieee80211_hw *hw = il->hw;
3555
3556 hw->rate_control_algorithm = "iwl-3945-rs";
3557 hw->sta_data_size = sizeof(struct il3945_sta_priv);
3558 hw->vif_data_size = sizeof(struct il_vif_priv);
3559
3560 /* Tell mac80211 our characteristics */
3561 ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS);
3562 ieee80211_hw_set(hw, SUPPORTS_PS);
3563 ieee80211_hw_set(hw, SIGNAL_DBM);
3564 ieee80211_hw_set(hw, SPECTRUM_MGMT);
3565
3566 hw->wiphy->interface_modes =
3567 BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
3568
3569 hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
3570 hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
3571 REGULATORY_DISABLE_BEACON_HINTS;
3572
3573 hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
3574
3575 hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
3576 /* we create the 802.11 header and a zero-length SSID element */
3577 hw->wiphy->max_scan_ie_len = IL3945_MAX_PROBE_REQUEST - 24 - 2;
3578
3579 /* Default value; 4 EDCA QOS priorities */
3580 hw->queues = 4;
3581
3582 if (il->bands[NL80211_BAND_2GHZ].n_channels)
3583 il->hw->wiphy->bands[NL80211_BAND_2GHZ] =
3584 &il->bands[NL80211_BAND_2GHZ];
3585
3586 if (il->bands[NL80211_BAND_5GHZ].n_channels)
3587 il->hw->wiphy->bands[NL80211_BAND_5GHZ] =
3588 &il->bands[NL80211_BAND_5GHZ];
3589
3590 il_leds_init(il);
3591
3592 wiphy_ext_feature_set(il->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
3593
3594 ret = ieee80211_register_hw(il->hw);
3595 if (ret) {
3596 IL_ERR("Failed to register hw (error %d)\n", ret);
3597 return ret;
3598 }
3599 il->mac80211_registered = 1;
3600
3601 return 0;
3602 }
3603
3604 static int
3605 il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3606 {
3607 int err = 0;
3608 struct il_priv *il;
3609 struct ieee80211_hw *hw;
3610 struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
3611 struct il3945_eeprom *eeprom;
3612 unsigned long flags;
3613
3614 /***********************
3615 * 1. Allocating HW data
3616 * ********************/
3617
3618 hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il3945_mac_ops);
3619 if (!hw) {
3620 err = -ENOMEM;
3621 goto out;
3622 }
3623 il = hw->priv;
3624 il->hw = hw;
3625 SET_IEEE80211_DEV(hw, &pdev->dev);
3626
3627 il->cmd_queue = IL39_CMD_QUEUE_NUM;
3628
3629 D_INFO("*** LOAD DRIVER ***\n");
3630 il->cfg = cfg;
3631 il->ops = &il3945_ops;
3632 #ifdef CONFIG_IWLEGACY_DEBUGFS
3633 il->debugfs_ops = &il3945_debugfs_ops;
3634 #endif
3635 il->pci_dev = pdev;
3636 il->inta_mask = CSR_INI_SET_MASK;
3637
3638 /***************************
3639 * 2. Initializing PCI bus
3640 * *************************/
3641 pci_disable_link_state(pdev,
3642 PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
3643 PCIE_LINK_STATE_CLKPM);
3644
3645 if (pci_enable_device(pdev)) {
3646 err = -ENODEV;
3647 goto out_ieee80211_free_hw;
3648 }
3649
3650 pci_set_master(pdev);
3651
3652 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3653 if (!err)
3654 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
3655 if (err) {
3656 IL_WARN("No suitable DMA available.\n");
3657 goto out_pci_disable_device;
3658 }
3659
3660 pci_set_drvdata(pdev, il);
3661 err = pci_request_regions(pdev, DRV_NAME);
3662 if (err)
3663 goto out_pci_disable_device;
3664
3665 /***********************
3666 * 3. Read REV Register
3667 * ********************/
3668 il->hw_base = pci_ioremap_bar(pdev, 0);
3669 if (!il->hw_base) {
3670 err = -ENODEV;
3671 goto out_pci_release_regions;
3672 }
3673
3674 D_INFO("pci_resource_len = 0x%08llx\n",
3675 (unsigned long long)pci_resource_len(pdev, 0));
3676 D_INFO("pci_resource_base = %p\n", il->hw_base);
3677
3678 /* We disable the RETRY_TIMEOUT register (0x41) to keep
3679 * PCI Tx retries from interfering with C3 CPU state */
3680 pci_write_config_byte(pdev, 0x41, 0x00);
3681
3682 /* these spin locks will be used in apm_init and EEPROM access
3683 * we should init now
3684 */
3685 spin_lock_init(&il->reg_lock);
3686 spin_lock_init(&il->lock);
3687
3688 /*
3689 * stop and reset the on-board processor just in case it is in a
3690 * strange state ... like being left stranded by a primary kernel
3691 * and this is now the kdump kernel trying to start up
3692 */
3693 _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
3694
3695 /***********************
3696 * 4. Read EEPROM
3697 * ********************/
3698
3699 /* Read the EEPROM */
3700 err = il_eeprom_init(il);
3701 if (err) {
3702 IL_ERR("Unable to init EEPROM\n");
3703 goto out_iounmap;
3704 }
3705 /* MAC Address location in EEPROM same for 3945/4965 */
3706 eeprom = (struct il3945_eeprom *)il->eeprom;
3707 D_INFO("MAC address: %pM\n", eeprom->mac_address);
3708 SET_IEEE80211_PERM_ADDR(il->hw, eeprom->mac_address);
3709
3710 /***********************
3711 * 5. Setup HW Constants
3712 * ********************/
3713 /* Device-specific setup */
3714 err = il3945_hw_set_hw_params(il);
3715 if (err) {
3716 IL_ERR("failed to set hw settings\n");
3717 goto out_eeprom_free;
3718 }
3719
3720 /***********************
3721 * 6. Setup il
3722 * ********************/
3723
3724 err = il3945_init_drv(il);
3725 if (err) {
3726 IL_ERR("initializing driver failed\n");
3727 goto out_unset_hw_params;
3728 }
3729
3730 IL_INFO("Detected Intel Wireless WiFi Link %s\n", il->cfg->name);
3731
3732 /***********************
3733 * 7. Setup Services
3734 * ********************/
3735
3736 spin_lock_irqsave(&il->lock, flags);
3737 il_disable_interrupts(il);
3738 spin_unlock_irqrestore(&il->lock, flags);
3739
3740 pci_enable_msi(il->pci_dev);
3741
3742 err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il);
3743 if (err) {
3744 IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
3745 goto out_disable_msi;
3746 }
3747
3748 err = sysfs_create_group(&pdev->dev.kobj, &il3945_attribute_group);
3749 if (err) {
3750 IL_ERR("failed to create sysfs device attributes\n");
3751 goto out_release_irq;
3752 }
3753
3754 il_set_rxon_channel(il, &il->bands[NL80211_BAND_2GHZ].channels[5]);
3755 il3945_setup_deferred_work(il);
3756 il3945_setup_handlers(il);
3757 il_power_initialize(il);
3758
3759 /*********************************
3760 * 8. Setup and Register mac80211
3761 * *******************************/
3762
3763 il_enable_interrupts(il);
3764
3765 err = il3945_setup_mac(il);
3766 if (err)
3767 goto out_remove_sysfs;
3768
3769 err = il_dbgfs_register(il, DRV_NAME);
3770 if (err)
3771 IL_ERR("failed to create debugfs files. Ignoring error: %d\n",
3772 err);
3773
3774 /* Start monitoring the killswitch */
3775 queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll, 2 * HZ);
3776
3777 return 0;
3778
3779 out_remove_sysfs:
3780 destroy_workqueue(il->workqueue);
3781 il->workqueue = NULL;
3782 sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
3783 out_release_irq:
3784 free_irq(il->pci_dev->irq, il);
3785 out_disable_msi:
3786 pci_disable_msi(il->pci_dev);
3787 il_free_geos(il);
3788 il_free_channel_map(il);
3789 out_unset_hw_params:
3790 il3945_unset_hw_params(il);
3791 out_eeprom_free:
3792 il_eeprom_free(il);
3793 out_iounmap:
3794 iounmap(il->hw_base);
3795 out_pci_release_regions:
3796 pci_release_regions(pdev);
3797 out_pci_disable_device:
3798 pci_disable_device(pdev);
3799 out_ieee80211_free_hw:
3800 ieee80211_free_hw(il->hw);
3801 out:
3802 return err;
3803 }
3804
3805 static void
3806 il3945_pci_remove(struct pci_dev *pdev)
3807 {
3808 struct il_priv *il = pci_get_drvdata(pdev);
3809 unsigned long flags;
3810
3811 if (!il)
3812 return;
3813
3814 D_INFO("*** UNLOAD DRIVER ***\n");
3815
3816 il_dbgfs_unregister(il);
3817
3818 set_bit(S_EXIT_PENDING, &il->status);
3819
3820 il_leds_exit(il);
3821
3822 if (il->mac80211_registered) {
3823 ieee80211_unregister_hw(il->hw);
3824 il->mac80211_registered = 0;
3825 } else {
3826 il3945_down(il);
3827 }
3828
3829 /*
3830 * Make sure device is reset to low power before unloading driver.
3831 * This may be redundant with il_down(), but there are paths to
3832 * run il_down() without calling apm_ops.stop(), and there are
3833 * paths to avoid running il_down() at all before leaving driver.
3834 * This (inexpensive) call *makes sure* device is reset.
3835 */
3836 il_apm_stop(il);
3837
3838 /* make sure we flush any pending irq or
3839 * tasklet for the driver
3840 */
3841 spin_lock_irqsave(&il->lock, flags);
3842 il_disable_interrupts(il);
3843 spin_unlock_irqrestore(&il->lock, flags);
3844
3845 il3945_synchronize_irq(il);
3846
3847 sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
3848
3849 cancel_delayed_work_sync(&il->_3945.rfkill_poll);
3850
3851 il3945_dealloc_ucode_pci(il);
3852
3853 if (il->rxq.bd)
3854 il3945_rx_queue_free(il, &il->rxq);
3855 il3945_hw_txq_ctx_free(il);
3856
3857 il3945_unset_hw_params(il);
3858
3859 /*netif_stop_queue(dev); */
3860 flush_workqueue(il->workqueue);
3861
3862 /* ieee80211_unregister_hw calls il3945_mac_stop, which flushes
3863 * il->workqueue... so we can't take down the workqueue
3864 * until now... */
3865 destroy_workqueue(il->workqueue);
3866 il->workqueue = NULL;
3867
3868 free_irq(pdev->irq, il);
3869 pci_disable_msi(pdev);
3870
3871 iounmap(il->hw_base);
3872 pci_release_regions(pdev);
3873 pci_disable_device(pdev);
3874
3875 il_free_channel_map(il);
3876 il_free_geos(il);
3877 kfree(il->scan_cmd);
3878 if (il->beacon_skb)
3879 dev_kfree_skb(il->beacon_skb);
3880
3881 ieee80211_free_hw(il->hw);
3882 }
3883
3884 /*****************************************************************************
3885 *
3886 * driver and module entry point
3887 *
3888 *****************************************************************************/
3889
3890 static struct pci_driver il3945_driver = {
3891 .name = DRV_NAME,
3892 .id_table = il3945_hw_card_ids,
3893 .probe = il3945_pci_probe,
3894 .remove = il3945_pci_remove,
3895 .driver.pm = IL_LEGACY_PM_OPS,
3896 };
3897
3898 static int __init
3899 il3945_init(void)
3900 {
3901
3902 int ret;
3903 pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
3904 pr_info(DRV_COPYRIGHT "\n");
3905
3906 /*
3907 * Disabling hardware scan means that mac80211 will perform scans
3908 * "the hard way", rather than using device's scan.
3909 */
3910 if (il3945_mod_params.disable_hw_scan) {
3911 pr_info("hw_scan is disabled\n");
3912 il3945_mac_ops.hw_scan = NULL;
3913 }
3914
3915 ret = il3945_rate_control_register();
3916 if (ret) {
3917 pr_err("Unable to register rate control algorithm: %d\n", ret);
3918 return ret;
3919 }
3920
3921 ret = pci_register_driver(&il3945_driver);
3922 if (ret) {
3923 pr_err("Unable to initialize PCI module\n");
3924 goto error_register;
3925 }
3926
3927 return ret;
3928
3929 error_register:
3930 il3945_rate_control_unregister();
3931 return ret;
3932 }
3933
3934 static void __exit
3935 il3945_exit(void)
3936 {
3937 pci_unregister_driver(&il3945_driver);
3938 il3945_rate_control_unregister();
3939 }
3940
3941 MODULE_FIRMWARE(IL3945_MODULE_FIRMWARE(IL3945_UCODE_API_MAX));
3942
3943 module_param_named(antenna, il3945_mod_params.antenna, int, 0444);
3944 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
3945 module_param_named(swcrypto, il3945_mod_params.sw_crypto, int, 0444);
3946 MODULE_PARM_DESC(swcrypto, "using software crypto (default 1 [software])");
3947 module_param_named(disable_hw_scan, il3945_mod_params.disable_hw_scan, int,
3948 0444);
3949 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)");
3950 #ifdef CONFIG_IWLEGACY_DEBUG
3951 module_param_named(debug, il_debug_level, uint, 0644);
3952 MODULE_PARM_DESC(debug, "debug output mask");
3953 #endif
3954 module_param_named(fw_restart, il3945_mod_params.restart_fw, int, 0444);
3955 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
3956
3957 module_exit(il3945_exit);
3958 module_init(il3945_init);
Linux with added FPC-III support