2 * Marvell Wireless LAN device driver: station RX data handling
4 * Copyright (C) 2011-2014, Marvell International Ltd.
6 * This software file (the "File") is distributed by Marvell International
7 * Ltd. under the terms of the GNU General Public License Version 2, June 1991
8 * (the "License"). You may use, redistribute and/or modify this File in
9 * accordance with the terms and conditions of the License, a copy of which
10 * is available by writing to the Free Software Foundation, Inc.,
11 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
12 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
14 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
15 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
16 * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
17 * this warranty disclaimer.
20 #include <uapi/linux/ipv6.h>
21 #include <net/ndisc.h>
28 #include "11n_rxreorder.h"
30 /* This function checks if a frame is IPv4 ARP or IPv6 Neighbour advertisement
31 * frame. If frame has both source and destination mac address as same, this
32 * function drops such gratuitous frames.
35 mwifiex_discard_gratuitous_arp(struct mwifiex_private
*priv
,
38 const struct mwifiex_arp_eth_header
*arp
;
41 struct icmp6hdr
*icmpv6
;
43 eth
= (struct ethhdr
*)skb
->data
;
44 switch (ntohs(eth
->h_proto
)) {
46 arp
= (void *)(skb
->data
+ sizeof(struct ethhdr
));
47 if (arp
->hdr
.ar_op
== htons(ARPOP_REPLY
) ||
48 arp
->hdr
.ar_op
== htons(ARPOP_REQUEST
)) {
49 if (!memcmp(arp
->ar_sip
, arp
->ar_tip
, 4))
54 ipv6
= (void *)(skb
->data
+ sizeof(struct ethhdr
));
55 icmpv6
= (void *)(skb
->data
+ sizeof(struct ethhdr
) +
56 sizeof(struct ipv6hdr
));
57 if (NDISC_NEIGHBOUR_ADVERTISEMENT
== icmpv6
->icmp6_type
) {
58 if (!memcmp(&ipv6
->saddr
, &ipv6
->daddr
,
59 sizeof(struct in6_addr
)))
71 * This function processes the received packet and forwards it
72 * to kernel/upper layer.
74 * This function parses through the received packet and determines
75 * if it is a debug packet or normal packet.
77 * For non-debug packets, the function chops off unnecessary leading
78 * header bytes, reconstructs the packet as an ethernet frame or
79 * 802.2/llc/snap frame as required, and sends it to kernel/upper layer.
81 * The completion callback is called after processing in complete.
83 int mwifiex_process_rx_packet(struct mwifiex_private
*priv
,
87 struct rx_packet_hdr
*rx_pkt_hdr
;
88 struct rxpd
*local_rx_pd
;
91 u16 rx_pkt_off
, rx_pkt_len
;
95 local_rx_pd
= (struct rxpd
*) (skb
->data
);
97 rx_pkt_off
= le16_to_cpu(local_rx_pd
->rx_pkt_offset
);
98 rx_pkt_len
= le16_to_cpu(local_rx_pd
->rx_pkt_length
);
99 rx_pkt_hdr
= (void *)local_rx_pd
+ rx_pkt_off
;
101 if ((!memcmp(&rx_pkt_hdr
->rfc1042_hdr
, bridge_tunnel_header
,
102 sizeof(bridge_tunnel_header
))) ||
103 (!memcmp(&rx_pkt_hdr
->rfc1042_hdr
, rfc1042_header
,
104 sizeof(rfc1042_header
)) &&
105 ntohs(rx_pkt_hdr
->rfc1042_hdr
.snap_type
) != ETH_P_AARP
&&
106 ntohs(rx_pkt_hdr
->rfc1042_hdr
.snap_type
) != ETH_P_IPX
)) {
108 * Replace the 803 header and rfc1042 header (llc/snap) with an
109 * EthernetII header, keep the src/dst and snap_type
111 * The firmware only passes up SNAP frames converting
112 * all RX Data from 802.11 to 802.2/LLC/SNAP frames.
113 * To create the Ethernet II, just move the src, dst address
114 * right before the snap_type.
116 eth
= (struct ethhdr
*)
117 ((u8
*) &rx_pkt_hdr
->eth803_hdr
118 + sizeof(rx_pkt_hdr
->eth803_hdr
) +
119 sizeof(rx_pkt_hdr
->rfc1042_hdr
)
120 - sizeof(rx_pkt_hdr
->eth803_hdr
.h_dest
)
121 - sizeof(rx_pkt_hdr
->eth803_hdr
.h_source
)
122 - sizeof(rx_pkt_hdr
->rfc1042_hdr
.snap_type
));
124 memcpy(eth
->h_source
, rx_pkt_hdr
->eth803_hdr
.h_source
,
125 sizeof(eth
->h_source
));
126 memcpy(eth
->h_dest
, rx_pkt_hdr
->eth803_hdr
.h_dest
,
127 sizeof(eth
->h_dest
));
129 /* Chop off the rxpd + the excess memory from the 802.2/llc/snap
130 header that was removed. */
131 hdr_chop
= (u8
*) eth
- (u8
*) local_rx_pd
;
133 /* Chop off the rxpd */
134 hdr_chop
= (u8
*) &rx_pkt_hdr
->eth803_hdr
-
138 /* Chop off the leading header bytes so the it points to the start of
139 either the reconstructed EthII frame or the 802.2/llc/snap frame */
140 skb_pull(skb
, hdr_chop
);
142 if (priv
->hs2_enabled
&&
143 mwifiex_discard_gratuitous_arp(priv
, skb
)) {
144 mwifiex_dbg(priv
->adapter
, INFO
, "Bypassed Gratuitous ARP\n");
145 dev_kfree_skb_any(skb
);
149 if (ISSUPP_TDLS_ENABLED(priv
->adapter
->fw_cap_info
) &&
150 ntohs(rx_pkt_hdr
->eth803_hdr
.h_proto
) == ETH_P_TDLS
) {
151 offset
= (u8
*)local_rx_pd
+ rx_pkt_off
;
152 mwifiex_process_tdls_action_frame(priv
, offset
, rx_pkt_len
);
155 priv
->rxpd_rate
= local_rx_pd
->rx_rate
;
157 priv
->rxpd_htinfo
= local_rx_pd
->ht_info
;
159 if (GET_BSS_ROLE(priv
) == MWIFIEX_BSS_ROLE_STA
||
160 GET_BSS_ROLE(priv
) == MWIFIEX_BSS_ROLE_UAP
) {
161 adj_rx_rate
= mwifiex_adjust_data_rate(priv
, priv
->rxpd_rate
,
163 mwifiex_hist_data_add(priv
, adj_rx_rate
, local_rx_pd
->snr
,
167 ret
= mwifiex_recv_packet(priv
, skb
);
169 mwifiex_dbg(priv
->adapter
, ERROR
,
170 "recv packet failed\n");
176 * This function processes the received buffer.
178 * The function looks into the RxPD and performs sanity tests on the
179 * received buffer to ensure its a valid packet, before processing it
180 * further. If the packet is determined to be aggregated, it is
181 * de-aggregated accordingly. Non-unicast packets are sent directly to
182 * the kernel/upper layers. Unicast packets are handed over to the
183 * Rx reordering routine if 11n is enabled.
185 * The completion callback is called after processing in complete.
187 int mwifiex_process_sta_rx_packet(struct mwifiex_private
*priv
,
190 struct mwifiex_adapter
*adapter
= priv
->adapter
;
192 struct rxpd
*local_rx_pd
;
193 struct rx_packet_hdr
*rx_pkt_hdr
;
195 u16 rx_pkt_type
, rx_pkt_offset
, rx_pkt_length
, seq_num
;
196 struct mwifiex_sta_node
*sta_ptr
;
198 local_rx_pd
= (struct rxpd
*) (skb
->data
);
199 rx_pkt_type
= le16_to_cpu(local_rx_pd
->rx_pkt_type
);
200 rx_pkt_offset
= le16_to_cpu(local_rx_pd
->rx_pkt_offset
);
201 rx_pkt_length
= le16_to_cpu(local_rx_pd
->rx_pkt_length
);
202 seq_num
= le16_to_cpu(local_rx_pd
->seq_num
);
204 rx_pkt_hdr
= (void *)local_rx_pd
+ rx_pkt_offset
;
206 if ((rx_pkt_offset
+ rx_pkt_length
) > (u16
) skb
->len
) {
207 mwifiex_dbg(adapter
, ERROR
,
208 "wrong rx packet: len=%d, rx_pkt_offset=%d, rx_pkt_length=%d\n",
209 skb
->len
, rx_pkt_offset
, rx_pkt_length
);
210 priv
->stats
.rx_dropped
++;
211 dev_kfree_skb_any(skb
);
215 if (rx_pkt_type
== PKT_TYPE_MGMT
) {
216 ret
= mwifiex_process_mgmt_packet(priv
, skb
);
218 mwifiex_dbg(adapter
, DATA
, "Rx of mgmt packet failed");
219 dev_kfree_skb_any(skb
);
224 * If the packet is not an unicast packet then send the packet
225 * directly to os. Don't pass thru rx reordering
227 if ((!IS_11N_ENABLED(priv
) &&
228 !(ISSUPP_TDLS_ENABLED(priv
->adapter
->fw_cap_info
) &&
229 !(local_rx_pd
->flags
& MWIFIEX_RXPD_FLAGS_TDLS_PACKET
))) ||
230 !ether_addr_equal_unaligned(priv
->curr_addr
, rx_pkt_hdr
->eth803_hdr
.h_dest
)) {
231 mwifiex_process_rx_packet(priv
, skb
);
235 if (mwifiex_queuing_ra_based(priv
) ||
236 (ISSUPP_TDLS_ENABLED(priv
->adapter
->fw_cap_info
) &&
237 local_rx_pd
->flags
& MWIFIEX_RXPD_FLAGS_TDLS_PACKET
)) {
238 memcpy(ta
, rx_pkt_hdr
->eth803_hdr
.h_source
, ETH_ALEN
);
239 if (local_rx_pd
->flags
& MWIFIEX_RXPD_FLAGS_TDLS_PACKET
&&
240 local_rx_pd
->priority
< MAX_NUM_TID
) {
241 sta_ptr
= mwifiex_get_sta_entry(priv
, ta
);
243 sta_ptr
->rx_seq
[local_rx_pd
->priority
] =
244 le16_to_cpu(local_rx_pd
->seq_num
);
245 mwifiex_auto_tdls_update_peer_signal(priv
, ta
,
250 if (rx_pkt_type
!= PKT_TYPE_BAR
)
251 priv
->rx_seq
[local_rx_pd
->priority
] = seq_num
;
252 memcpy(ta
, priv
->curr_bss_params
.bss_descriptor
.mac_address
,
256 /* Reorder and send to OS */
257 ret
= mwifiex_11n_rx_reorder_pkt(priv
, seq_num
, local_rx_pd
->priority
,
258 ta
, (u8
) rx_pkt_type
, skb
);
260 if (ret
|| (rx_pkt_type
== PKT_TYPE_BAR
))
261 dev_kfree_skb_any(skb
);
264 priv
->stats
.rx_dropped
++;