arch/sh/boards/mach-kfr2r09/setup.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * KFR2R09 board support code
   4  *
   5  * Copyright (C) 2009 Magnus Damm
   6  */
   7
   8 #include <asm/clock.h>
   9 #include <asm/io.h>
  10 #include <asm/machvec.h>
  11 #include <asm/suspend.h>
  12
  13 #include <cpu/sh7724.h>
  14
  15 #include <linux/clkdev.h>
  16 #include <linux/delay.h>
  17 #include <linux/dma-mapping.h>
  18 #include <linux/gpio.h>
  19 #include <linux/gpio/machine.h>
  20 #include <linux/i2c.h>
  21 #include <linux/init.h>
  22 #include <linux/input.h>
  23 #include <linux/input/sh_keysc.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/memblock.h>
  26 #include <linux/mfd/tmio.h>
  27 #include <linux/mmc/host.h>
  28 #include <linux/mtd/onenand.h>
  29 #include <linux/mtd/physmap.h>
  30 #include <linux/platform_data/lv5207lp.h>
  31 #include <linux/platform_device.h>
  32 #include <linux/regulator/fixed.h>
  33 #include <linux/regulator/machine.h>
  34 #include <linux/sh_intc.h>
  35 #include <linux/usb/r8a66597.h>
  36 #include <linux/videodev2.h>
  37
  38 #include <mach/kfr2r09.h>
  39
  40 #include <media/drv-intf/renesas-ceu.h>
  41 #include <media/i2c/rj54n1cb0c.h>
  42
  43 #include <video/sh_mobile_lcdc.h>
  44
  45 #define CEU_BUFFER_MEMORY_SIZE          (4 << 20)
  46 static phys_addr_t ceu_dma_membase;
  47
  48 /* set VIO_CKO clock to 25MHz */
  49 #define CEU_MCLK_FREQ                   25000000
  50 #define DRVCRB                          0xA405018C
  51
  52 static struct mtd_partition kfr2r09_nor_flash_partitions[] =
  53 {
  54         {
  55                 .name = "boot",
  56                 .offset = 0,
  57                 .size = (4 * 1024 * 1024),
  58                 .mask_flags = MTD_WRITEABLE,    /* Read-only */
  59         },
  60         {
  61                 .name = "other",
  62                 .offset = MTDPART_OFS_APPEND,
  63                 .size = MTDPART_SIZ_FULL,
  64         },
  65 };
  66
  67 static struct physmap_flash_data kfr2r09_nor_flash_data = {
  68         .width          = 2,
  69         .parts          = kfr2r09_nor_flash_partitions,
  70         .nr_parts       = ARRAY_SIZE(kfr2r09_nor_flash_partitions),
  71 };
  72
  73 static struct resource kfr2r09_nor_flash_resources[] = {
  74         [0] = {
  75                 .name           = "NOR Flash",
  76                 .start          = 0x00000000,
  77                 .end            = 0x03ffffff,
  78                 .flags          = IORESOURCE_MEM,
  79         }
  80 };
  81
  82 static struct platform_device kfr2r09_nor_flash_device = {
  83         .name           = "physmap-flash",
  84         .resource       = kfr2r09_nor_flash_resources,
  85         .num_resources  = ARRAY_SIZE(kfr2r09_nor_flash_resources),
  86         .dev            = {
  87                 .platform_data = &kfr2r09_nor_flash_data,
  88         },
  89 };
  90
  91 static struct resource kfr2r09_nand_flash_resources[] = {
  92         [0] = {
  93                 .name           = "NAND Flash",
  94                 .start          = 0x10000000,
  95                 .end            = 0x1001ffff,
  96                 .flags          = IORESOURCE_MEM,
  97         }
  98 };
  99
 100 static struct platform_device kfr2r09_nand_flash_device = {
 101         .name           = "onenand-flash",
 102         .resource       = kfr2r09_nand_flash_resources,
 103         .num_resources  = ARRAY_SIZE(kfr2r09_nand_flash_resources),
 104 };
 105
 106 static struct sh_keysc_info kfr2r09_sh_keysc_info = {
 107         .mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
 108         .scan_timing = 3,
 109         .delay = 10,
 110         .keycodes = {
 111                 KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
 112                 KEY_1, KEY_2, KEY_3, 0, KEY_UP,
 113                 KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
 114                 KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
 115                 KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
 116                 0, 0, 0, 0, 0
 117         },
 118 };
 119
 120 static struct resource kfr2r09_sh_keysc_resources[] = {
 121         [0] = {
 122                 .name   = "KEYSC",
 123                 .start  = 0x044b0000,
 124                 .end    = 0x044b000f,
 125                 .flags  = IORESOURCE_MEM,
 126         },
 127         [1] = {
 128                 .start  = evt2irq(0xbe0),
 129                 .flags  = IORESOURCE_IRQ,
 130         },
 131 };
 132
 133 static struct platform_device kfr2r09_sh_keysc_device = {
 134         .name           = "sh_keysc",
 135         .id             = 0, /* "keysc0" clock */
 136         .num_resources  = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
 137         .resource       = kfr2r09_sh_keysc_resources,
 138         .dev    = {
 139                 .platform_data  = &kfr2r09_sh_keysc_info,
 140         },
 141 };
 142
 143 static const struct fb_videomode kfr2r09_lcdc_modes[] = {
 144         {
 145                 .name = "TX07D34VM0AAA",
 146                 .xres = 240,
 147                 .yres = 400,
 148                 .left_margin = 0,
 149                 .right_margin = 16,
 150                 .hsync_len = 8,
 151                 .upper_margin = 0,
 152                 .lower_margin = 1,
 153                 .vsync_len = 1,
 154                 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 155         },
 156 };
 157
 158 static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
 159         .clock_source = LCDC_CLK_BUS,
 160         .ch[0] = {
 161                 .chan = LCDC_CHAN_MAINLCD,
 162                 .fourcc = V4L2_PIX_FMT_RGB565,
 163                 .interface_type = SYS18,
 164                 .clock_divider = 6,
 165                 .flags = LCDC_FLAGS_DWPOL,
 166                 .lcd_modes = kfr2r09_lcdc_modes,
 167                 .num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes),
 168                 .panel_cfg = {
 169                         .width = 35,
 170                         .height = 58,
 171                         .setup_sys = kfr2r09_lcd_setup,
 172                         .start_transfer = kfr2r09_lcd_start,
 173                 },
 174                 .sys_bus_cfg = {
 175                         .ldmt2r = 0x07010904,
 176                         .ldmt3r = 0x14012914,
 177                         /* set 1s delay to encourage fsync() */
 178                         .deferred_io_msec = 1000,
 179                 },
 180         }
 181 };
 182
 183 static struct resource kfr2r09_sh_lcdc_resources[] = {
 184         [0] = {
 185                 .name   = "LCDC",
 186                 .start  = 0xfe940000, /* P4-only space */
 187                 .end    = 0xfe942fff,
 188                 .flags  = IORESOURCE_MEM,
 189         },
 190         [1] = {
 191                 .start  = evt2irq(0xf40),
 192                 .flags  = IORESOURCE_IRQ,
 193         },
 194 };
 195
 196 static struct platform_device kfr2r09_sh_lcdc_device = {
 197         .name           = "sh_mobile_lcdc_fb",
 198         .num_resources  = ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
 199         .resource       = kfr2r09_sh_lcdc_resources,
 200         .dev    = {
 201                 .platform_data  = &kfr2r09_sh_lcdc_info,
 202         },
 203 };
 204
 205 static struct lv5207lp_platform_data kfr2r09_backlight_data = {
 206         .fbdev = &kfr2r09_sh_lcdc_device.dev,
 207         .def_value = 13,
 208         .max_value = 13,
 209 };
 210
 211 static struct i2c_board_info kfr2r09_backlight_board_info = {
 212         I2C_BOARD_INFO("lv5207lp", 0x75),
 213         .platform_data = &kfr2r09_backlight_data,
 214 };
 215
 216 static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
 217         .on_chip = 1,
 218 };
 219
 220 static struct resource kfr2r09_usb0_gadget_resources[] = {
 221         [0] = {
 222                 .start  = 0x04d80000,
 223                 .end    = 0x04d80123,
 224                 .flags  = IORESOURCE_MEM,
 225         },
 226         [1] = {
 227                 .start  = evt2irq(0xa20),
 228                 .end    = evt2irq(0xa20),
 229                 .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 230         },
 231 };
 232
 233 static struct platform_device kfr2r09_usb0_gadget_device = {
 234         .name           = "r8a66597_udc",
 235         .id             = 0,
 236         .dev = {
 237                 .dma_mask               = NULL,         /*  not use dma */
 238                 .coherent_dma_mask      = 0xffffffff,
 239                 .platform_data  = &kfr2r09_usb0_gadget_data,
 240         },
 241         .num_resources  = ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
 242         .resource       = kfr2r09_usb0_gadget_resources,
 243 };
 244
 245 static struct ceu_platform_data ceu_pdata = {
 246         .num_subdevs                    = 1,
 247         .subdevs = {
 248                 { /* [0] = rj54n1cb0c */
 249                         .flags          = 0,
 250                         .bus_width      = 8,
 251                         .bus_shift      = 0,
 252                         .i2c_adapter_id = 1,
 253                         .i2c_address    = 0x50,
 254                 },
 255         },
 256 };
 257
 258 static struct resource kfr2r09_ceu_resources[] = {
 259         [0] = {
 260                 .name   = "CEU",
 261                 .start  = 0xfe910000,
 262                 .end    = 0xfe91009f,
 263                 .flags  = IORESOURCE_MEM,
 264         },
 265         [1] = {
 266                 .start  = evt2irq(0x880),
 267                 .end    = evt2irq(0x880),
 268                 .flags  = IORESOURCE_IRQ,
 269         },
 270 };
 271
 272 static struct platform_device kfr2r09_ceu_device = {
 273         .name           = "renesas-ceu",
 274         .id             = 0, /* "ceu0" clock */
 275         .num_resources  = ARRAY_SIZE(kfr2r09_ceu_resources),
 276         .resource       = kfr2r09_ceu_resources,
 277         .dev    = {
 278                 .platform_data  = &ceu_pdata,
 279         },
 280 };
 281
 282 static struct rj54n1_pdata rj54n1_priv = {
 283         .mclk_freq      = CEU_MCLK_FREQ,
 284         .ioctl_high     = false,
 285 };
 286
 287 static struct i2c_board_info kfr2r09_i2c_camera = {
 288         I2C_BOARD_INFO("rj54n1cb0c", 0x50),
 289         .platform_data = &rj54n1_priv,
 290 };
 291
 292 static struct gpiod_lookup_table rj54n1_gpios = {
 293         .dev_id         = "1-0050",
 294         .table          = {
 295                 GPIO_LOOKUP("sh7724_pfc", GPIO_PTB4, "poweron",
 296                             GPIO_ACTIVE_HIGH),
 297                 GPIO_LOOKUP("sh7724_pfc", GPIO_PTB7, "enable",
 298                             GPIO_ACTIVE_HIGH),
 299         },
 300 };
 301
 302 /* Fixed 3.3V regulator to be used by SDHI0 */
 303 static struct regulator_consumer_supply fixed3v3_power_consumers[] =
 304 {
 305         REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
 306         REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
 307 };
 308
 309 static struct resource kfr2r09_sh_sdhi0_resources[] = {
 310         [0] = {
 311                 .name   = "SDHI0",
 312                 .start  = 0x04ce0000,
 313                 .end    = 0x04ce00ff,
 314                 .flags  = IORESOURCE_MEM,
 315         },
 316         [1] = {
 317                 .start  = evt2irq(0xe80),
 318                 .flags  = IORESOURCE_IRQ,
 319         },
 320 };
 321
 322 static struct tmio_mmc_data sh7724_sdhi0_data = {
 323         .chan_priv_tx   = (void *)SHDMA_SLAVE_SDHI0_TX,
 324         .chan_priv_rx   = (void *)SHDMA_SLAVE_SDHI0_RX,
 325         .capabilities   = MMC_CAP_SDIO_IRQ,
 326         .capabilities2  = MMC_CAP2_NO_WRITE_PROTECT,
 327 };
 328
 329 static struct platform_device kfr2r09_sh_sdhi0_device = {
 330         .name           = "sh_mobile_sdhi",
 331         .num_resources  = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
 332         .resource       = kfr2r09_sh_sdhi0_resources,
 333         .dev = {
 334                 .platform_data  = &sh7724_sdhi0_data,
 335         },
 336 };
 337
 338 static struct platform_device *kfr2r09_devices[] __initdata = {
 339         &kfr2r09_nor_flash_device,
 340         &kfr2r09_nand_flash_device,
 341         &kfr2r09_sh_keysc_device,
 342         &kfr2r09_sh_lcdc_device,
 343         &kfr2r09_sh_sdhi0_device,
 344 };
 345
 346 #define BSC_CS0BCR 0xfec10004
 347 #define BSC_CS0WCR 0xfec10024
 348 #define BSC_CS4BCR 0xfec10010
 349 #define BSC_CS4WCR 0xfec10030
 350 #define PORT_MSELCRB 0xa4050182
 351
 352 #ifdef CONFIG_I2C
 353 static int kfr2r09_usb0_gadget_i2c_setup(void)
 354 {
 355         struct i2c_adapter *a;
 356         struct i2c_msg msg;
 357         unsigned char buf[2];
 358         int ret;
 359
 360         a = i2c_get_adapter(0);
 361         if (!a)
 362                 return -ENODEV;
 363
 364         /* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
 365         buf[0] = 0x13;
 366         msg.addr = 0x09;
 367         msg.buf = buf;
 368         msg.len = 1;
 369         msg.flags = 0;
 370         ret = i2c_transfer(a, &msg, 1);
 371         if (ret != 1)
 372                 return -ENODEV;
 373
 374         buf[0] = 0;
 375         msg.addr = 0x09;
 376         msg.buf = buf;
 377         msg.len = 1;
 378         msg.flags = I2C_M_RD;
 379         ret = i2c_transfer(a, &msg, 1);
 380         if (ret != 1)
 381                 return -ENODEV;
 382
 383         buf[1] = buf[0] | (1 << 1);
 384         buf[0] = 0x13;
 385         msg.addr = 0x09;
 386         msg.buf = buf;
 387         msg.len = 2;
 388         msg.flags = 0;
 389         ret = i2c_transfer(a, &msg, 1);
 390         if (ret != 1)
 391                 return -ENODEV;
 392
 393         return 0;
 394 }
 395
 396 static int kfr2r09_serial_i2c_setup(void)
 397 {
 398         struct i2c_adapter *a;
 399         struct i2c_msg msg;
 400         unsigned char buf[2];
 401         int ret;
 402
 403         a = i2c_get_adapter(0);
 404         if (!a)
 405                 return -ENODEV;
 406
 407         /* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */
 408         buf[0] = 0x13;
 409         msg.addr = 0x09;
 410         msg.buf = buf;
 411         msg.len = 1;
 412         msg.flags = 0;
 413         ret = i2c_transfer(a, &msg, 1);
 414         if (ret != 1)
 415                 return -ENODEV;
 416
 417         buf[0] = 0;
 418         msg.addr = 0x09;
 419         msg.buf = buf;
 420         msg.len = 1;
 421         msg.flags = I2C_M_RD;
 422         ret = i2c_transfer(a, &msg, 1);
 423         if (ret != 1)
 424                 return -ENODEV;
 425
 426         buf[1] = buf[0] | (1 << 6);
 427         buf[0] = 0x13;
 428         msg.addr = 0x09;
 429         msg.buf = buf;
 430         msg.len = 2;
 431         msg.flags = 0;
 432         ret = i2c_transfer(a, &msg, 1);
 433         if (ret != 1)
 434                 return -ENODEV;
 435
 436         return 0;
 437 }
 438 #else
 439 static int kfr2r09_usb0_gadget_i2c_setup(void)
 440 {
 441         return -ENODEV;
 442 }
 443
 444 static int kfr2r09_serial_i2c_setup(void)
 445 {
 446         return -ENODEV;
 447 }
 448 #endif
 449
 450 static int kfr2r09_usb0_gadget_setup(void)
 451 {
 452         int plugged_in;
 453
 454         gpio_request(GPIO_PTN4, NULL); /* USB_DET */
 455         gpio_direction_input(GPIO_PTN4);
 456         plugged_in = gpio_get_value(GPIO_PTN4);
 457         if (!plugged_in)
 458                 return -ENODEV; /* no cable plugged in */
 459
 460         if (kfr2r09_usb0_gadget_i2c_setup() != 0)
 461                 return -ENODEV; /* unable to configure using i2c */
 462
 463         __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
 464         gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
 465         gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
 466         gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
 467         msleep(20); /* wait 20ms to let the clock settle */
 468         clk_enable(clk_get(NULL, "usb0"));
 469         __raw_writew(0x0600, 0xa40501d4);
 470
 471         return 0;
 472 }
 473
 474 extern char kfr2r09_sdram_enter_start;
 475 extern char kfr2r09_sdram_enter_end;
 476 extern char kfr2r09_sdram_leave_start;
 477 extern char kfr2r09_sdram_leave_end;
 478
 479 static int __init kfr2r09_devices_setup(void)
 480 {
 481         static struct clk *camera_clk;
 482
 483         /* register board specific self-refresh code */
 484         sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
 485                                         SUSP_SH_RSTANDBY,
 486                                         &kfr2r09_sdram_enter_start,
 487                                         &kfr2r09_sdram_enter_end,
 488                                         &kfr2r09_sdram_leave_start,
 489                                         &kfr2r09_sdram_leave_end);
 490
 491         regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
 492                                      ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
 493
 494         /* enable SCIF1 serial port for YC401 console support */
 495         gpio_request(GPIO_FN_SCIF1_RXD, NULL);
 496         gpio_request(GPIO_FN_SCIF1_TXD, NULL);
 497         kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */
 498         gpio_request(GPIO_PTG3, NULL); /* HPON_ON */
 499         gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
 500
 501         /* setup NOR flash at CS0 */
 502         __raw_writel(0x36db0400, BSC_CS0BCR);
 503         __raw_writel(0x00000500, BSC_CS0WCR);
 504
 505         /* setup NAND flash at CS4 */
 506         __raw_writel(0x36db0400, BSC_CS4BCR);
 507         __raw_writel(0x00000500, BSC_CS4WCR);
 508
 509         /* setup KEYSC pins */
 510         gpio_request(GPIO_FN_KEYOUT0, NULL);
 511         gpio_request(GPIO_FN_KEYOUT1, NULL);
 512         gpio_request(GPIO_FN_KEYOUT2, NULL);
 513         gpio_request(GPIO_FN_KEYOUT3, NULL);
 514         gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
 515         gpio_request(GPIO_FN_KEYIN0, NULL);
 516         gpio_request(GPIO_FN_KEYIN1, NULL);
 517         gpio_request(GPIO_FN_KEYIN2, NULL);
 518         gpio_request(GPIO_FN_KEYIN3, NULL);
 519         gpio_request(GPIO_FN_KEYIN4, NULL);
 520         gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
 521
 522         /* setup LCDC pins for SYS panel */
 523         gpio_request(GPIO_FN_LCDD17, NULL);
 524         gpio_request(GPIO_FN_LCDD16, NULL);
 525         gpio_request(GPIO_FN_LCDD15, NULL);
 526         gpio_request(GPIO_FN_LCDD14, NULL);
 527         gpio_request(GPIO_FN_LCDD13, NULL);
 528         gpio_request(GPIO_FN_LCDD12, NULL);
 529         gpio_request(GPIO_FN_LCDD11, NULL);
 530         gpio_request(GPIO_FN_LCDD10, NULL);
 531         gpio_request(GPIO_FN_LCDD9, NULL);
 532         gpio_request(GPIO_FN_LCDD8, NULL);
 533         gpio_request(GPIO_FN_LCDD7, NULL);
 534         gpio_request(GPIO_FN_LCDD6, NULL);
 535         gpio_request(GPIO_FN_LCDD5, NULL);
 536         gpio_request(GPIO_FN_LCDD4, NULL);
 537         gpio_request(GPIO_FN_LCDD3, NULL);
 538         gpio_request(GPIO_FN_LCDD2, NULL);
 539         gpio_request(GPIO_FN_LCDD1, NULL);
 540         gpio_request(GPIO_FN_LCDD0, NULL);
 541         gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
 542         gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
 543         gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
 544         gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
 545         gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
 546         gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
 547         gpio_direction_output(GPIO_PTE4, 1);
 548         gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
 549         gpio_direction_output(GPIO_PTF4, 1);
 550         gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
 551         gpio_direction_output(GPIO_PTU0, 1);
 552
 553         /* setup USB function */
 554         if (kfr2r09_usb0_gadget_setup() == 0)
 555                 platform_device_register(&kfr2r09_usb0_gadget_device);
 556
 557         /* CEU */
 558         gpio_request(GPIO_FN_VIO_CKO, NULL);
 559         gpio_request(GPIO_FN_VIO0_CLK, NULL);
 560         gpio_request(GPIO_FN_VIO0_VD, NULL);
 561         gpio_request(GPIO_FN_VIO0_HD, NULL);
 562         gpio_request(GPIO_FN_VIO0_FLD, NULL);
 563         gpio_request(GPIO_FN_VIO0_D7, NULL);
 564         gpio_request(GPIO_FN_VIO0_D6, NULL);
 565         gpio_request(GPIO_FN_VIO0_D5, NULL);
 566         gpio_request(GPIO_FN_VIO0_D4, NULL);
 567         gpio_request(GPIO_FN_VIO0_D3, NULL);
 568         gpio_request(GPIO_FN_VIO0_D2, NULL);
 569         gpio_request(GPIO_FN_VIO0_D1, NULL);
 570         gpio_request(GPIO_FN_VIO0_D0, NULL);
 571
 572         /* SDHI0 connected to yc304 */
 573         gpio_request(GPIO_FN_SDHI0CD, NULL);
 574         gpio_request(GPIO_FN_SDHI0D3, NULL);
 575         gpio_request(GPIO_FN_SDHI0D2, NULL);
 576         gpio_request(GPIO_FN_SDHI0D1, NULL);
 577         gpio_request(GPIO_FN_SDHI0D0, NULL);
 578         gpio_request(GPIO_FN_SDHI0CMD, NULL);
 579         gpio_request(GPIO_FN_SDHI0CLK, NULL);
 580
 581         i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1);
 582
 583         /* Set camera clock frequency and register and alias for rj54n1. */
 584         camera_clk = clk_get(NULL, "video_clk");
 585         if (!IS_ERR(camera_clk)) {
 586                 clk_set_rate(camera_clk,
 587                              clk_round_rate(camera_clk, CEU_MCLK_FREQ));
 588                 clk_put(camera_clk);
 589         }
 590         clk_add_alias(NULL, "1-0050", "video_clk", NULL);
 591
 592         /* set DRVCRB
 593          *
 594          * use 1.8 V for VccQ_VIO
 595          * use 2.85V for VccQ_SR
 596          */
 597         __raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
 598
 599         gpiod_add_lookup_table(&rj54n1_gpios);
 600
 601         i2c_register_board_info(1, &kfr2r09_i2c_camera, 1);
 602
 603         /* Initialize CEU platform device separately to map memory first */
 604         device_initialize(&kfr2r09_ceu_device.dev);
 605         arch_setup_pdev_archdata(&kfr2r09_ceu_device);
 606         dma_declare_coherent_memory(&kfr2r09_ceu_device.dev,
 607                                     ceu_dma_membase, ceu_dma_membase,
 608                                     ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1,
 609                                     DMA_MEMORY_EXCLUSIVE);
 610
 611         platform_device_add(&kfr2r09_ceu_device);
 612
 613         return platform_add_devices(kfr2r09_devices,
 614                                     ARRAY_SIZE(kfr2r09_devices));
 615 }
 616 device_initcall(kfr2r09_devices_setup);
 617
 618 /* Return the board specific boot mode pin configuration */
 619 static int kfr2r09_mode_pins(void)
 620 {
 621         /* MD0=1, MD1=1, MD2=0: Clock Mode 3
 622          * MD3=0: 16-bit Area0 Bus Width
 623          * MD5=1: Little Endian
 624          * MD8=1: Test Mode Disabled
 625          */
 626         return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
 627 }
 628
 629 /* Reserve a portion of memory for CEU buffers */
 630 static void __init kfr2r09_mv_mem_reserve(void)
 631 {
 632         phys_addr_t phys;
 633         phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
 634
 635         phys = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_ALLOC_ANYWHERE);
 636         memblock_free(phys, size);
 637         memblock_remove(phys, size);
 638
 639         ceu_dma_membase = phys;
 640 }
 641
 642 /*
 643  * The Machine Vector
 644  */
 645 static struct sh_machine_vector mv_kfr2r09 __initmv = {
 646         .mv_name                = "kfr2r09",
 647         .mv_mode_pins           = kfr2r09_mode_pins,
 648         .mv_mem_reserve         = kfr2r09_mv_mem_reserve,
 649 };