rt2x00: Style fix for interval defines
[linux/fpc-iii.git] / init / do_mounts.c
blobdd7ee5f203f3f9c476a92d9ef39257a2791b132f
1 #include <linux/module.h>
2 #include <linux/sched.h>
3 #include <linux/ctype.h>
4 #include <linux/fd.h>
5 #include <linux/tty.h>
6 #include <linux/suspend.h>
7 #include <linux/root_dev.h>
8 #include <linux/security.h>
9 #include <linux/delay.h>
10 #include <linux/genhd.h>
11 #include <linux/mount.h>
12 #include <linux/device.h>
13 #include <linux/init.h>
14 #include <linux/fs.h>
15 #include <linux/initrd.h>
16 #include <linux/async.h>
17 #include <linux/fs_struct.h>
19 #include <linux/nfs_fs.h>
20 #include <linux/nfs_fs_sb.h>
21 #include <linux/nfs_mount.h>
23 #include "do_mounts.h"
25 int __initdata rd_doload; /* 1 = load RAM disk, 0 = don't load */
27 int root_mountflags = MS_RDONLY | MS_SILENT;
28 static char * __initdata root_device_name;
29 static char __initdata saved_root_name[64];
30 static int __initdata root_wait;
32 dev_t ROOT_DEV;
34 static int __init load_ramdisk(char *str)
36 rd_doload = simple_strtol(str,NULL,0) & 3;
37 return 1;
39 __setup("load_ramdisk=", load_ramdisk);
41 static int __init readonly(char *str)
43 if (*str)
44 return 0;
45 root_mountflags |= MS_RDONLY;
46 return 1;
49 static int __init readwrite(char *str)
51 if (*str)
52 return 0;
53 root_mountflags &= ~MS_RDONLY;
54 return 1;
57 __setup("ro", readonly);
58 __setup("rw", readwrite);
61 * Convert a name into device number. We accept the following variants:
63 * 1) device number in hexadecimal represents itself
64 * 2) /dev/nfs represents Root_NFS (0xff)
65 * 3) /dev/<disk_name> represents the device number of disk
66 * 4) /dev/<disk_name><decimal> represents the device number
67 * of partition - device number of disk plus the partition number
68 * 5) /dev/<disk_name>p<decimal> - same as the above, that form is
69 * used when disk name of partitioned disk ends on a digit.
71 * If name doesn't have fall into the categories above, we return (0,0).
72 * block_class is used to check if something is a disk name. If the disk
73 * name contains slashes, the device name has them replaced with
74 * bangs.
77 dev_t name_to_dev_t(char *name)
79 char s[32];
80 char *p;
81 dev_t res = 0;
82 int part;
84 if (strncmp(name, "/dev/", 5) != 0) {
85 unsigned maj, min;
87 if (sscanf(name, "%u:%u", &maj, &min) == 2) {
88 res = MKDEV(maj, min);
89 if (maj != MAJOR(res) || min != MINOR(res))
90 goto fail;
91 } else {
92 res = new_decode_dev(simple_strtoul(name, &p, 16));
93 if (*p)
94 goto fail;
96 goto done;
99 name += 5;
100 res = Root_NFS;
101 if (strcmp(name, "nfs") == 0)
102 goto done;
103 res = Root_RAM0;
104 if (strcmp(name, "ram") == 0)
105 goto done;
107 if (strlen(name) > 31)
108 goto fail;
109 strcpy(s, name);
110 for (p = s; *p; p++)
111 if (*p == '/')
112 *p = '!';
113 res = blk_lookup_devt(s, 0);
114 if (res)
115 goto done;
118 * try non-existant, but valid partition, which may only exist
119 * after revalidating the disk, like partitioned md devices
121 while (p > s && isdigit(p[-1]))
122 p--;
123 if (p == s || !*p || *p == '0')
124 goto fail;
126 /* try disk name without <part number> */
127 part = simple_strtoul(p, NULL, 10);
128 *p = '\0';
129 res = blk_lookup_devt(s, part);
130 if (res)
131 goto done;
133 /* try disk name without p<part number> */
134 if (p < s + 2 || !isdigit(p[-2]) || p[-1] != 'p')
135 goto fail;
136 p[-1] = '\0';
137 res = blk_lookup_devt(s, part);
138 if (res)
139 goto done;
141 fail:
142 return 0;
143 done:
144 return res;
147 static int __init root_dev_setup(char *line)
149 strlcpy(saved_root_name, line, sizeof(saved_root_name));
150 return 1;
153 __setup("root=", root_dev_setup);
155 static int __init rootwait_setup(char *str)
157 if (*str)
158 return 0;
159 root_wait = 1;
160 return 1;
163 __setup("rootwait", rootwait_setup);
165 static char * __initdata root_mount_data;
166 static int __init root_data_setup(char *str)
168 root_mount_data = str;
169 return 1;
172 static char * __initdata root_fs_names;
173 static int __init fs_names_setup(char *str)
175 root_fs_names = str;
176 return 1;
179 static unsigned int __initdata root_delay;
180 static int __init root_delay_setup(char *str)
182 root_delay = simple_strtoul(str, NULL, 0);
183 return 1;
186 __setup("rootflags=", root_data_setup);
187 __setup("rootfstype=", fs_names_setup);
188 __setup("rootdelay=", root_delay_setup);
190 static void __init get_fs_names(char *page)
192 char *s = page;
194 if (root_fs_names) {
195 strcpy(page, root_fs_names);
196 while (*s++) {
197 if (s[-1] == ',')
198 s[-1] = '\0';
200 } else {
201 int len = get_filesystem_list(page);
202 char *p, *next;
204 page[len] = '\0';
205 for (p = page-1; p; p = next) {
206 next = strchr(++p, '\n');
207 if (*p++ != '\t')
208 continue;
209 while ((*s++ = *p++) != '\n')
211 s[-1] = '\0';
214 *s = '\0';
217 static int __init do_mount_root(char *name, char *fs, int flags, void *data)
219 int err = sys_mount(name, "/root", fs, flags, data);
220 if (err)
221 return err;
223 sys_chdir("/root");
224 ROOT_DEV = current->fs->pwd.mnt->mnt_sb->s_dev;
225 printk("VFS: Mounted root (%s filesystem)%s on device %u:%u.\n",
226 current->fs->pwd.mnt->mnt_sb->s_type->name,
227 current->fs->pwd.mnt->mnt_sb->s_flags & MS_RDONLY ?
228 " readonly" : "", MAJOR(ROOT_DEV), MINOR(ROOT_DEV));
229 return 0;
232 void __init mount_block_root(char *name, int flags)
234 char *fs_names = __getname();
235 char *p;
236 #ifdef CONFIG_BLOCK
237 char b[BDEVNAME_SIZE];
238 #else
239 const char *b = name;
240 #endif
242 get_fs_names(fs_names);
243 retry:
244 for (p = fs_names; *p; p += strlen(p)+1) {
245 int err = do_mount_root(name, p, flags, root_mount_data);
246 switch (err) {
247 case 0:
248 goto out;
249 case -EACCES:
250 flags |= MS_RDONLY;
251 goto retry;
252 case -EINVAL:
253 continue;
256 * Allow the user to distinguish between failed sys_open
257 * and bad superblock on root device.
258 * and give them a list of the available devices
260 #ifdef CONFIG_BLOCK
261 __bdevname(ROOT_DEV, b);
262 #endif
263 printk("VFS: Cannot open root device \"%s\" or %s\n",
264 root_device_name, b);
265 printk("Please append a correct \"root=\" boot option; here are the available partitions:\n");
267 printk_all_partitions();
268 #ifdef CONFIG_DEBUG_BLOCK_EXT_DEVT
269 printk("DEBUG_BLOCK_EXT_DEVT is enabled, you need to specify "
270 "explicit textual name for \"root=\" boot option.\n");
271 #endif
272 panic("VFS: Unable to mount root fs on %s", b);
275 printk("List of all partitions:\n");
276 printk_all_partitions();
277 printk("No filesystem could mount root, tried: ");
278 for (p = fs_names; *p; p += strlen(p)+1)
279 printk(" %s", p);
280 printk("\n");
281 #ifdef CONFIG_BLOCK
282 __bdevname(ROOT_DEV, b);
283 #endif
284 panic("VFS: Unable to mount root fs on %s", b);
285 out:
286 putname(fs_names);
289 #ifdef CONFIG_ROOT_NFS
290 static int __init mount_nfs_root(void)
292 void *data = nfs_root_data();
294 create_dev("/dev/root", ROOT_DEV);
295 if (data &&
296 do_mount_root("/dev/root", "nfs", root_mountflags, data) == 0)
297 return 1;
298 return 0;
300 #endif
302 #if defined(CONFIG_BLK_DEV_RAM) || defined(CONFIG_BLK_DEV_FD)
303 void __init change_floppy(char *fmt, ...)
305 struct termios termios;
306 char buf[80];
307 char c;
308 int fd;
309 va_list args;
310 va_start(args, fmt);
311 vsprintf(buf, fmt, args);
312 va_end(args);
313 fd = sys_open("/dev/root", O_RDWR | O_NDELAY, 0);
314 if (fd >= 0) {
315 sys_ioctl(fd, FDEJECT, 0);
316 sys_close(fd);
318 printk(KERN_NOTICE "VFS: Insert %s and press ENTER\n", buf);
319 fd = sys_open("/dev/console", O_RDWR, 0);
320 if (fd >= 0) {
321 sys_ioctl(fd, TCGETS, (long)&termios);
322 termios.c_lflag &= ~ICANON;
323 sys_ioctl(fd, TCSETSF, (long)&termios);
324 sys_read(fd, &c, 1);
325 termios.c_lflag |= ICANON;
326 sys_ioctl(fd, TCSETSF, (long)&termios);
327 sys_close(fd);
330 #endif
332 void __init mount_root(void)
334 #ifdef CONFIG_ROOT_NFS
335 if (MAJOR(ROOT_DEV) == UNNAMED_MAJOR) {
336 if (mount_nfs_root())
337 return;
339 printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n");
340 ROOT_DEV = Root_FD0;
342 #endif
343 #ifdef CONFIG_BLK_DEV_FD
344 if (MAJOR(ROOT_DEV) == FLOPPY_MAJOR) {
345 /* rd_doload is 2 for a dual initrd/ramload setup */
346 if (rd_doload==2) {
347 if (rd_load_disk(1)) {
348 ROOT_DEV = Root_RAM1;
349 root_device_name = NULL;
351 } else
352 change_floppy("root floppy");
354 #endif
355 #ifdef CONFIG_BLOCK
356 create_dev("/dev/root", ROOT_DEV);
357 mount_block_root("/dev/root", root_mountflags);
358 #endif
362 * Prepare the namespace - decide what/where to mount, load ramdisks, etc.
364 void __init prepare_namespace(void)
366 int is_floppy;
368 if (root_delay) {
369 printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
370 root_delay);
371 ssleep(root_delay);
375 * wait for the known devices to complete their probing
377 * Note: this is a potential source of long boot delays.
378 * For example, it is not atypical to wait 5 seconds here
379 * for the touchpad of a laptop to initialize.
381 wait_for_device_probe();
383 md_run_setup();
385 if (saved_root_name[0]) {
386 root_device_name = saved_root_name;
387 if (!strncmp(root_device_name, "mtd", 3) ||
388 !strncmp(root_device_name, "ubi", 3)) {
389 mount_block_root(root_device_name, root_mountflags);
390 goto out;
392 ROOT_DEV = name_to_dev_t(root_device_name);
393 if (strncmp(root_device_name, "/dev/", 5) == 0)
394 root_device_name += 5;
397 if (initrd_load())
398 goto out;
400 /* wait for any asynchronous scanning to complete */
401 if ((ROOT_DEV == 0) && root_wait) {
402 printk(KERN_INFO "Waiting for root device %s...\n",
403 saved_root_name);
404 while (driver_probe_done() != 0 ||
405 (ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
406 msleep(100);
407 async_synchronize_full();
410 is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
412 if (is_floppy && rd_doload && rd_load_disk(0))
413 ROOT_DEV = Root_RAM0;
415 mount_root();
416 out:
417 sys_mount(".", "/", NULL, MS_MOVE, NULL);
418 sys_chroot(".");