perf scripts python: exported-sql-viewer.py: Use new 'has_calls' column
[linux/fpc-iii.git] / drivers / firmware / pcdp.c
blob4adeb7a2bdf5529bbdc700e97c316c161f066411
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Parse the EFI PCDP table to locate the console device.
5 * (c) Copyright 2002, 2003, 2004 Hewlett-Packard Development Company, L.P.
6 * Khalid Aziz <khalid.aziz@hp.com>
7 * Alex Williamson <alex.williamson@hp.com>
8 * Bjorn Helgaas <bjorn.helgaas@hp.com>
9 */
11 #include <linux/acpi.h>
12 #include <linux/console.h>
13 #include <linux/efi.h>
14 #include <linux/serial.h>
15 #include <linux/serial_core.h>
16 #include <asm/vga.h>
17 #include "pcdp.h"
19 static int __init
20 setup_serial_console(struct pcdp_uart *uart)
22 #ifdef CONFIG_SERIAL_8250_CONSOLE
23 int mmio;
24 static char options[64], *p = options;
25 char parity;
27 mmio = (uart->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY);
28 p += sprintf(p, "uart8250,%s,0x%llx",
29 mmio ? "mmio" : "io", uart->addr.address);
30 if (uart->baud) {
31 p += sprintf(p, ",%llu", uart->baud);
32 if (uart->bits) {
33 switch (uart->parity) {
34 case 0x2: parity = 'e'; break;
35 case 0x3: parity = 'o'; break;
36 default: parity = 'n';
38 p += sprintf(p, "%c%d", parity, uart->bits);
42 add_preferred_console("uart", 8250, &options[9]);
43 return setup_earlycon(options);
44 #else
45 return -ENODEV;
46 #endif
49 static int __init
50 setup_vga_console(struct pcdp_device *dev)
52 #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
53 u8 *if_ptr;
55 if_ptr = ((u8 *)dev + sizeof(struct pcdp_device));
56 if (if_ptr[0] == PCDP_IF_PCI) {
57 struct pcdp_if_pci if_pci;
59 /* struct copy since ifptr might not be correctly aligned */
61 memcpy(&if_pci, if_ptr, sizeof(if_pci));
63 if (if_pci.trans & PCDP_PCI_TRANS_IOPORT)
64 vga_console_iobase = if_pci.ioport_tra;
66 if (if_pci.trans & PCDP_PCI_TRANS_MMIO)
67 vga_console_membase = if_pci.mmio_tra;
70 if (efi_mem_type(vga_console_membase + 0xA0000) == EFI_CONVENTIONAL_MEMORY) {
71 printk(KERN_ERR "PCDP: VGA selected, but frame buffer is not MMIO!\n");
72 return -ENODEV;
75 conswitchp = &vga_con;
76 printk(KERN_INFO "PCDP: VGA console\n");
77 return 0;
78 #else
79 return -ENODEV;
80 #endif
83 int __init
84 efi_setup_pcdp_console(char *cmdline)
86 struct pcdp *pcdp;
87 struct pcdp_uart *uart;
88 struct pcdp_device *dev, *end;
89 int i, serial = 0;
90 int rc = -ENODEV;
92 if (efi.hcdp == EFI_INVALID_TABLE_ADDR)
93 return -ENODEV;
95 pcdp = early_memremap(efi.hcdp, 4096);
96 printk(KERN_INFO "PCDP: v%d at 0x%lx\n", pcdp->rev, efi.hcdp);
98 if (strstr(cmdline, "console=hcdp")) {
99 if (pcdp->rev < 3)
100 serial = 1;
101 } else if (strstr(cmdline, "console=")) {
102 printk(KERN_INFO "Explicit \"console=\"; ignoring PCDP\n");
103 goto out;
106 if (pcdp->rev < 3 && efi_uart_console_only())
107 serial = 1;
109 for (i = 0, uart = pcdp->uart; i < pcdp->num_uarts; i++, uart++) {
110 if (uart->flags & PCDP_UART_PRIMARY_CONSOLE || serial) {
111 if (uart->type == PCDP_CONSOLE_UART) {
112 rc = setup_serial_console(uart);
113 goto out;
118 end = (struct pcdp_device *) ((u8 *) pcdp + pcdp->length);
119 for (dev = (struct pcdp_device *) (pcdp->uart + pcdp->num_uarts);
120 dev < end;
121 dev = (struct pcdp_device *) ((u8 *) dev + dev->length)) {
122 if (dev->flags & PCDP_PRIMARY_CONSOLE) {
123 if (dev->type == PCDP_CONSOLE_VGA) {
124 rc = setup_vga_console(dev);
125 goto out;
130 out:
131 early_memunmap(pcdp, 4096);
132 return rc;