Linux 3.7.4
[linux/fpc-iii.git] / arch / alpha / kernel / irq_alpha.c
blob772ddfdb71a8e67af8f20e38ff7f8def9af3b943
1 /*
2 * Alpha specific irq code.
3 */
5 #include <linux/init.h>
6 #include <linux/sched.h>
7 #include <linux/irq.h>
8 #include <linux/kernel_stat.h>
9 #include <linux/module.h>
11 #include <asm/machvec.h>
12 #include <asm/dma.h>
13 #include <asm/perf_event.h>
14 #include <asm/mce.h>
16 #include "proto.h"
17 #include "irq_impl.h"
19 /* Hack minimum IPL during interrupt processing for broken hardware. */
20 #ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
21 int __min_ipl;
22 EXPORT_SYMBOL(__min_ipl);
23 #endif
26 * Performance counter hook. A module can override this to
27 * do something useful.
29 static void
30 dummy_perf(unsigned long vector, struct pt_regs *regs)
32 irq_err_count++;
33 printk(KERN_CRIT "Performance counter interrupt!\n");
36 void (*perf_irq)(unsigned long, struct pt_regs *) = dummy_perf;
37 EXPORT_SYMBOL(perf_irq);
40 * The main interrupt entry point.
43 asmlinkage void
44 do_entInt(unsigned long type, unsigned long vector,
45 unsigned long la_ptr, struct pt_regs *regs)
47 struct pt_regs *old_regs;
48 switch (type) {
49 case 0:
50 #ifdef CONFIG_SMP
51 handle_ipi(regs);
52 return;
53 #else
54 irq_err_count++;
55 printk(KERN_CRIT "Interprocessor interrupt? "
56 "You must be kidding!\n");
57 #endif
58 break;
59 case 1:
60 old_regs = set_irq_regs(regs);
61 #ifdef CONFIG_SMP
63 long cpu;
65 local_irq_disable();
66 smp_percpu_timer_interrupt(regs);
67 cpu = smp_processor_id();
68 if (cpu != boot_cpuid) {
69 kstat_incr_irqs_this_cpu(RTC_IRQ, irq_to_desc(RTC_IRQ));
70 } else {
71 handle_irq(RTC_IRQ);
74 #else
75 handle_irq(RTC_IRQ);
76 #endif
77 set_irq_regs(old_regs);
78 return;
79 case 2:
80 old_regs = set_irq_regs(regs);
81 alpha_mv.machine_check(vector, la_ptr);
82 set_irq_regs(old_regs);
83 return;
84 case 3:
85 old_regs = set_irq_regs(regs);
86 alpha_mv.device_interrupt(vector);
87 set_irq_regs(old_regs);
88 return;
89 case 4:
90 perf_irq(la_ptr, regs);
91 return;
92 default:
93 printk(KERN_CRIT "Hardware intr %ld %lx? Huh?\n",
94 type, vector);
96 printk(KERN_CRIT "PC = %016lx PS=%04lx\n", regs->pc, regs->ps);
99 void __init
100 common_init_isa_dma(void)
102 outb(0, DMA1_RESET_REG);
103 outb(0, DMA2_RESET_REG);
104 outb(0, DMA1_CLR_MASK_REG);
105 outb(0, DMA2_CLR_MASK_REG);
108 void __init
109 init_IRQ(void)
111 /* Just in case the platform init_irq() causes interrupts/mchecks
112 (as is the case with RAWHIDE, at least). */
113 wrent(entInt, 0);
115 alpha_mv.init_irq();
119 * machine error checks
121 #define MCHK_K_TPERR 0x0080
122 #define MCHK_K_TCPERR 0x0082
123 #define MCHK_K_HERR 0x0084
124 #define MCHK_K_ECC_C 0x0086
125 #define MCHK_K_ECC_NC 0x0088
126 #define MCHK_K_OS_BUGCHECK 0x008A
127 #define MCHK_K_PAL_BUGCHECK 0x0090
129 #ifndef CONFIG_SMP
130 struct mcheck_info __mcheck_info;
131 #endif
133 void
134 process_mcheck_info(unsigned long vector, unsigned long la_ptr,
135 const char *machine, int expected)
137 struct el_common *mchk_header;
138 const char *reason;
141 * See if the machine check is due to a badaddr() and if so,
142 * ignore it.
145 #ifdef CONFIG_VERBOSE_MCHECK
146 if (alpha_verbose_mcheck > 1) {
147 printk(KERN_CRIT "%s machine check %s\n", machine,
148 expected ? "expected." : "NOT expected!!!");
150 #endif
152 if (expected) {
153 int cpu = smp_processor_id();
154 mcheck_expected(cpu) = 0;
155 mcheck_taken(cpu) = 1;
156 return;
159 mchk_header = (struct el_common *)la_ptr;
161 printk(KERN_CRIT "%s machine check: vector=0x%lx pc=0x%lx code=0x%x\n",
162 machine, vector, get_irq_regs()->pc, mchk_header->code);
164 switch (mchk_header->code) {
165 /* Machine check reasons. Defined according to PALcode sources. */
166 case 0x80: reason = "tag parity error"; break;
167 case 0x82: reason = "tag control parity error"; break;
168 case 0x84: reason = "generic hard error"; break;
169 case 0x86: reason = "correctable ECC error"; break;
170 case 0x88: reason = "uncorrectable ECC error"; break;
171 case 0x8A: reason = "OS-specific PAL bugcheck"; break;
172 case 0x90: reason = "callsys in kernel mode"; break;
173 case 0x96: reason = "i-cache read retryable error"; break;
174 case 0x98: reason = "processor detected hard error"; break;
176 /* System specific (these are for Alcor, at least): */
177 case 0x202: reason = "system detected hard error"; break;
178 case 0x203: reason = "system detected uncorrectable ECC error"; break;
179 case 0x204: reason = "SIO SERR occurred on PCI bus"; break;
180 case 0x205: reason = "parity error detected by core logic"; break;
181 case 0x206: reason = "SIO IOCHK occurred on ISA bus"; break;
182 case 0x207: reason = "non-existent memory error"; break;
183 case 0x208: reason = "MCHK_K_DCSR"; break;
184 case 0x209: reason = "PCI SERR detected"; break;
185 case 0x20b: reason = "PCI data parity error detected"; break;
186 case 0x20d: reason = "PCI address parity error detected"; break;
187 case 0x20f: reason = "PCI master abort error"; break;
188 case 0x211: reason = "PCI target abort error"; break;
189 case 0x213: reason = "scatter/gather PTE invalid error"; break;
190 case 0x215: reason = "flash ROM write error"; break;
191 case 0x217: reason = "IOA timeout detected"; break;
192 case 0x219: reason = "IOCHK#, EISA add-in board parity or other catastrophic error"; break;
193 case 0x21b: reason = "EISA fail-safe timer timeout"; break;
194 case 0x21d: reason = "EISA bus time-out"; break;
195 case 0x21f: reason = "EISA software generated NMI"; break;
196 case 0x221: reason = "unexpected ev5 IRQ[3] interrupt"; break;
197 default: reason = "unknown"; break;
200 printk(KERN_CRIT "machine check type: %s%s\n",
201 reason, mchk_header->retry ? " (retryable)" : "");
203 dik_show_regs(get_irq_regs(), NULL);
205 #ifdef CONFIG_VERBOSE_MCHECK
206 if (alpha_verbose_mcheck > 1) {
207 /* Dump the logout area to give all info. */
208 unsigned long *ptr = (unsigned long *)la_ptr;
209 long i;
210 for (i = 0; i < mchk_header->size / sizeof(long); i += 2) {
211 printk(KERN_CRIT " +%8lx %016lx %016lx\n",
212 i*sizeof(long), ptr[i], ptr[i+1]);
215 #endif /* CONFIG_VERBOSE_MCHECK */
219 * The special RTC interrupt type. The interrupt itself was
220 * processed by PALcode, and comes in via entInt vector 1.
223 struct irqaction timer_irqaction = {
224 .handler = timer_interrupt,
225 .flags = IRQF_DISABLED,
226 .name = "timer",
229 void __init
230 init_rtc_irq(void)
232 irq_set_chip_and_handler_name(RTC_IRQ, &dummy_irq_chip,
233 handle_simple_irq, "RTC");
234 setup_irq(RTC_IRQ, &timer_irqaction);
237 /* Dummy irqactions. */
238 struct irqaction isa_cascade_irqaction = {
239 .handler = no_action,
240 .name = "isa-cascade"
243 struct irqaction timer_cascade_irqaction = {
244 .handler = no_action,
245 .name = "timer-cascade"
248 struct irqaction halt_switch_irqaction = {
249 .handler = no_action,
250 .name = "halt-switch"