2 * originally based on the dummy device.
4 * Copyright 1999, Thomas Davis, tadavis@lbl.gov.
5 * Licensed under the GPL. Based on dummy.c, and eql.c devices.
7 * bonding.c: an Ethernet Bonding driver
9 * This is useful to talk to a Cisco EtherChannel compatible equipment:
11 * Sun Trunking (Solaris)
12 * Alteon AceDirector Trunks
14 * and probably many L2 switches ...
17 * ifconfig bond0 ipaddress netmask up
18 * will setup a network device, with an ip address. No mac address
19 * will be assigned at this time. The hw mac address will come from
20 * the first slave bonded to the channel. All slaves will then use
21 * this hw mac address.
24 * will release all slaves, marking them as down.
26 * ifenslave bond0 eth0
27 * will attach eth0 to bond0 as a slave. eth0 hw mac address will either
28 * a: be used as initial mac address
29 * b: if a hw mac address already is there, eth0's hw mac address
30 * will then be set from bond0.
34 #include <linux/kernel.h>
35 #include <linux/module.h>
36 #include <linux/types.h>
37 #include <linux/fcntl.h>
38 #include <linux/interrupt.h>
39 #include <linux/ptrace.h>
40 #include <linux/ioport.h>
44 #include <linux/tcp.h>
45 #include <linux/udp.h>
46 #include <linux/slab.h>
47 #include <linux/string.h>
48 #include <linux/init.h>
49 #include <linux/timer.h>
50 #include <linux/socket.h>
51 #include <linux/ctype.h>
52 #include <linux/inet.h>
53 #include <linux/bitops.h>
56 #include <linux/uaccess.h>
57 #include <linux/errno.h>
58 #include <linux/netdevice.h>
59 #include <linux/inetdevice.h>
60 #include <linux/igmp.h>
61 #include <linux/etherdevice.h>
62 #include <linux/skbuff.h>
64 #include <linux/rtnetlink.h>
65 #include <linux/smp.h>
66 #include <linux/if_ether.h>
68 #include <linux/mii.h>
69 #include <linux/ethtool.h>
70 #include <linux/if_vlan.h>
71 #include <linux/if_bonding.h>
72 #include <linux/jiffies.h>
73 #include <linux/preempt.h>
74 #include <net/route.h>
75 #include <net/net_namespace.h>
76 #include <net/netns/generic.h>
77 #include <net/pkt_sched.h>
78 #include <linux/rculist.h>
79 #include <net/flow_dissector.h>
80 #include <net/switchdev.h>
81 #include <net/bonding.h>
82 #include <net/bond_3ad.h>
83 #include <net/bond_alb.h>
85 #include "bonding_priv.h"
87 /*---------------------------- Module parameters ----------------------------*/
89 /* monitor all links that often (in milliseconds). <=0 disables monitoring */
91 static int max_bonds
= BOND_DEFAULT_MAX_BONDS
;
92 static int tx_queues
= BOND_DEFAULT_TX_QUEUES
;
93 static int num_peer_notif
= 1;
97 static int use_carrier
= 1;
100 static char *primary_reselect
;
101 static char *lacp_rate
;
102 static int min_links
;
103 static char *ad_select
;
104 static char *xmit_hash_policy
;
105 static int arp_interval
;
106 static char *arp_ip_target
[BOND_MAX_ARP_TARGETS
];
107 static char *arp_validate
;
108 static char *arp_all_targets
;
109 static char *fail_over_mac
;
110 static int all_slaves_active
;
111 static struct bond_params bonding_defaults
;
112 static int resend_igmp
= BOND_DEFAULT_RESEND_IGMP
;
113 static int packets_per_slave
= 1;
114 static int lp_interval
= BOND_ALB_DEFAULT_LP_INTERVAL
;
116 module_param(max_bonds
, int, 0);
117 MODULE_PARM_DESC(max_bonds
, "Max number of bonded devices");
118 module_param(tx_queues
, int, 0);
119 MODULE_PARM_DESC(tx_queues
, "Max number of transmit queues (default = 16)");
120 module_param_named(num_grat_arp
, num_peer_notif
, int, 0644);
121 MODULE_PARM_DESC(num_grat_arp
, "Number of peer notifications to send on "
122 "failover event (alias of num_unsol_na)");
123 module_param_named(num_unsol_na
, num_peer_notif
, int, 0644);
124 MODULE_PARM_DESC(num_unsol_na
, "Number of peer notifications to send on "
125 "failover event (alias of num_grat_arp)");
126 module_param(miimon
, int, 0);
127 MODULE_PARM_DESC(miimon
, "Link check interval in milliseconds");
128 module_param(updelay
, int, 0);
129 MODULE_PARM_DESC(updelay
, "Delay before considering link up, in milliseconds");
130 module_param(downdelay
, int, 0);
131 MODULE_PARM_DESC(downdelay
, "Delay before considering link down, "
133 module_param(use_carrier
, int, 0);
134 MODULE_PARM_DESC(use_carrier
, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
135 "0 for off, 1 for on (default)");
136 module_param(mode
, charp
, 0);
137 MODULE_PARM_DESC(mode
, "Mode of operation; 0 for balance-rr, "
138 "1 for active-backup, 2 for balance-xor, "
139 "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
140 "6 for balance-alb");
141 module_param(primary
, charp
, 0);
142 MODULE_PARM_DESC(primary
, "Primary network device to use");
143 module_param(primary_reselect
, charp
, 0);
144 MODULE_PARM_DESC(primary_reselect
, "Reselect primary slave "
146 "0 for always (default), "
147 "1 for only if speed of primary is "
149 "2 for only on active slave "
151 module_param(lacp_rate
, charp
, 0);
152 MODULE_PARM_DESC(lacp_rate
, "LACPDU tx rate to request from 802.3ad partner; "
153 "0 for slow, 1 for fast");
154 module_param(ad_select
, charp
, 0);
155 MODULE_PARM_DESC(ad_select
, "803.ad aggregation selection logic; "
156 "0 for stable (default), 1 for bandwidth, "
158 module_param(min_links
, int, 0);
159 MODULE_PARM_DESC(min_links
, "Minimum number of available links before turning on carrier");
161 module_param(xmit_hash_policy
, charp
, 0);
162 MODULE_PARM_DESC(xmit_hash_policy
, "balance-xor and 802.3ad hashing method; "
163 "0 for layer 2 (default), 1 for layer 3+4, "
164 "2 for layer 2+3, 3 for encap layer 2+3, "
165 "4 for encap layer 3+4");
166 module_param(arp_interval
, int, 0);
167 MODULE_PARM_DESC(arp_interval
, "arp interval in milliseconds");
168 module_param_array(arp_ip_target
, charp
, NULL
, 0);
169 MODULE_PARM_DESC(arp_ip_target
, "arp targets in n.n.n.n form");
170 module_param(arp_validate
, charp
, 0);
171 MODULE_PARM_DESC(arp_validate
, "validate src/dst of ARP probes; "
172 "0 for none (default), 1 for active, "
173 "2 for backup, 3 for all");
174 module_param(arp_all_targets
, charp
, 0);
175 MODULE_PARM_DESC(arp_all_targets
, "fail on any/all arp targets timeout; 0 for any (default), 1 for all");
176 module_param(fail_over_mac
, charp
, 0);
177 MODULE_PARM_DESC(fail_over_mac
, "For active-backup, do not set all slaves to "
178 "the same MAC; 0 for none (default), "
179 "1 for active, 2 for follow");
180 module_param(all_slaves_active
, int, 0);
181 MODULE_PARM_DESC(all_slaves_active
, "Keep all frames received on an interface "
182 "by setting active flag for all slaves; "
183 "0 for never (default), 1 for always.");
184 module_param(resend_igmp
, int, 0);
185 MODULE_PARM_DESC(resend_igmp
, "Number of IGMP membership reports to send on "
187 module_param(packets_per_slave
, int, 0);
188 MODULE_PARM_DESC(packets_per_slave
, "Packets to send per slave in balance-rr "
189 "mode; 0 for a random slave, 1 packet per "
190 "slave (default), >1 packets per slave.");
191 module_param(lp_interval
, uint
, 0);
192 MODULE_PARM_DESC(lp_interval
, "The number of seconds between instances where "
193 "the bonding driver sends learning packets to "
194 "each slaves peer switch. The default is 1.");
196 /*----------------------------- Global variables ----------------------------*/
198 #ifdef CONFIG_NET_POLL_CONTROLLER
199 atomic_t netpoll_block_tx
= ATOMIC_INIT(0);
202 int bond_net_id __read_mostly
;
204 static __be32 arp_target
[BOND_MAX_ARP_TARGETS
];
205 static int arp_ip_count
;
206 static int bond_mode
= BOND_MODE_ROUNDROBIN
;
207 static int xmit_hashtype
= BOND_XMIT_POLICY_LAYER2
;
208 static int lacp_fast
;
210 /*-------------------------- Forward declarations ---------------------------*/
212 static int bond_init(struct net_device
*bond_dev
);
213 static void bond_uninit(struct net_device
*bond_dev
);
214 static struct rtnl_link_stats64
*bond_get_stats(struct net_device
*bond_dev
,
215 struct rtnl_link_stats64
*stats
);
216 static void bond_slave_arr_handler(struct work_struct
*work
);
217 static bool bond_time_in_interval(struct bonding
*bond
, unsigned long last_act
,
220 /*---------------------------- General routines -----------------------------*/
222 const char *bond_mode_name(int mode
)
224 static const char *names
[] = {
225 [BOND_MODE_ROUNDROBIN
] = "load balancing (round-robin)",
226 [BOND_MODE_ACTIVEBACKUP
] = "fault-tolerance (active-backup)",
227 [BOND_MODE_XOR
] = "load balancing (xor)",
228 [BOND_MODE_BROADCAST
] = "fault-tolerance (broadcast)",
229 [BOND_MODE_8023AD
] = "IEEE 802.3ad Dynamic link aggregation",
230 [BOND_MODE_TLB
] = "transmit load balancing",
231 [BOND_MODE_ALB
] = "adaptive load balancing",
234 if (mode
< BOND_MODE_ROUNDROBIN
|| mode
> BOND_MODE_ALB
)
240 /*---------------------------------- VLAN -----------------------------------*/
243 * bond_dev_queue_xmit - Prepare skb for xmit.
245 * @bond: bond device that got this skb for tx.
246 * @skb: hw accel VLAN tagged skb to transmit
247 * @slave_dev: slave that is supposed to xmit this skbuff
249 void bond_dev_queue_xmit(struct bonding
*bond
, struct sk_buff
*skb
,
250 struct net_device
*slave_dev
)
252 skb
->dev
= slave_dev
;
254 BUILD_BUG_ON(sizeof(skb
->queue_mapping
) !=
255 sizeof(qdisc_skb_cb(skb
)->slave_dev_queue_mapping
));
256 skb
->queue_mapping
= qdisc_skb_cb(skb
)->slave_dev_queue_mapping
;
258 if (unlikely(netpoll_tx_running(bond
->dev
)))
259 bond_netpoll_send_skb(bond_get_slave_by_dev(bond
, slave_dev
), skb
);
264 /* In the following 2 functions, bond_vlan_rx_add_vid and bond_vlan_rx_kill_vid,
265 * We don't protect the slave list iteration with a lock because:
266 * a. This operation is performed in IOCTL context,
267 * b. The operation is protected by the RTNL semaphore in the 8021q code,
268 * c. Holding a lock with BH disabled while directly calling a base driver
269 * entry point is generally a BAD idea.
271 * The design of synchronization/protection for this operation in the 8021q
272 * module is good for one or more VLAN devices over a single physical device
273 * and cannot be extended for a teaming solution like bonding, so there is a
274 * potential race condition here where a net device from the vlan group might
275 * be referenced (either by a base driver or the 8021q code) while it is being
276 * removed from the system. However, it turns out we're not making matters
277 * worse, and if it works for regular VLAN usage it will work here too.
281 * bond_vlan_rx_add_vid - Propagates adding an id to slaves
282 * @bond_dev: bonding net device that got called
283 * @vid: vlan id being added
285 static int bond_vlan_rx_add_vid(struct net_device
*bond_dev
,
286 __be16 proto
, u16 vid
)
288 struct bonding
*bond
= netdev_priv(bond_dev
);
289 struct slave
*slave
, *rollback_slave
;
290 struct list_head
*iter
;
293 bond_for_each_slave(bond
, slave
, iter
) {
294 res
= vlan_vid_add(slave
->dev
, proto
, vid
);
302 /* unwind to the slave that failed */
303 bond_for_each_slave(bond
, rollback_slave
, iter
) {
304 if (rollback_slave
== slave
)
307 vlan_vid_del(rollback_slave
->dev
, proto
, vid
);
314 * bond_vlan_rx_kill_vid - Propagates deleting an id to slaves
315 * @bond_dev: bonding net device that got called
316 * @vid: vlan id being removed
318 static int bond_vlan_rx_kill_vid(struct net_device
*bond_dev
,
319 __be16 proto
, u16 vid
)
321 struct bonding
*bond
= netdev_priv(bond_dev
);
322 struct list_head
*iter
;
325 bond_for_each_slave(bond
, slave
, iter
)
326 vlan_vid_del(slave
->dev
, proto
, vid
);
328 if (bond_is_lb(bond
))
329 bond_alb_clear_vlan(bond
, vid
);
334 /*------------------------------- Link status -------------------------------*/
336 /* Set the carrier state for the master according to the state of its
337 * slaves. If any slaves are up, the master is up. In 802.3ad mode,
338 * do special 802.3ad magic.
340 * Returns zero if carrier state does not change, nonzero if it does.
342 int bond_set_carrier(struct bonding
*bond
)
344 struct list_head
*iter
;
347 if (!bond_has_slaves(bond
))
350 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
351 return bond_3ad_set_carrier(bond
);
353 bond_for_each_slave(bond
, slave
, iter
) {
354 if (slave
->link
== BOND_LINK_UP
) {
355 if (!netif_carrier_ok(bond
->dev
)) {
356 netif_carrier_on(bond
->dev
);
364 if (netif_carrier_ok(bond
->dev
)) {
365 netif_carrier_off(bond
->dev
);
371 /* Get link speed and duplex from the slave's base driver
372 * using ethtool. If for some reason the call fails or the
373 * values are invalid, set speed and duplex to -1,
376 static void bond_update_speed_duplex(struct slave
*slave
)
378 struct net_device
*slave_dev
= slave
->dev
;
379 struct ethtool_link_ksettings ecmd
;
382 slave
->speed
= SPEED_UNKNOWN
;
383 slave
->duplex
= DUPLEX_UNKNOWN
;
385 res
= __ethtool_get_link_ksettings(slave_dev
, &ecmd
);
389 if (ecmd
.base
.speed
== 0 || ecmd
.base
.speed
== ((__u32
)-1))
392 switch (ecmd
.base
.duplex
) {
400 slave
->speed
= ecmd
.base
.speed
;
401 slave
->duplex
= ecmd
.base
.duplex
;
406 const char *bond_slave_link_status(s8 link
)
422 /* if <dev> supports MII link status reporting, check its link status.
424 * We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(),
425 * depending upon the setting of the use_carrier parameter.
427 * Return either BMSR_LSTATUS, meaning that the link is up (or we
428 * can't tell and just pretend it is), or 0, meaning that the link is
431 * If reporting is non-zero, instead of faking link up, return -1 if
432 * both ETHTOOL and MII ioctls fail (meaning the device does not
433 * support them). If use_carrier is set, return whatever it says.
434 * It'd be nice if there was a good way to tell if a driver supports
435 * netif_carrier, but there really isn't.
437 static int bond_check_dev_link(struct bonding
*bond
,
438 struct net_device
*slave_dev
, int reporting
)
440 const struct net_device_ops
*slave_ops
= slave_dev
->netdev_ops
;
441 int (*ioctl
)(struct net_device
*, struct ifreq
*, int);
443 struct mii_ioctl_data
*mii
;
445 if (!reporting
&& !netif_running(slave_dev
))
448 if (bond
->params
.use_carrier
)
449 return netif_carrier_ok(slave_dev
) ? BMSR_LSTATUS
: 0;
451 /* Try to get link status using Ethtool first. */
452 if (slave_dev
->ethtool_ops
->get_link
)
453 return slave_dev
->ethtool_ops
->get_link(slave_dev
) ?
456 /* Ethtool can't be used, fallback to MII ioctls. */
457 ioctl
= slave_ops
->ndo_do_ioctl
;
459 /* TODO: set pointer to correct ioctl on a per team member
460 * bases to make this more efficient. that is, once
461 * we determine the correct ioctl, we will always
462 * call it and not the others for that team
466 /* We cannot assume that SIOCGMIIPHY will also read a
467 * register; not all network drivers (e.g., e100)
471 /* Yes, the mii is overlaid on the ifreq.ifr_ifru */
472 strncpy(ifr
.ifr_name
, slave_dev
->name
, IFNAMSIZ
);
474 if (IOCTL(slave_dev
, &ifr
, SIOCGMIIPHY
) == 0) {
475 mii
->reg_num
= MII_BMSR
;
476 if (IOCTL(slave_dev
, &ifr
, SIOCGMIIREG
) == 0)
477 return mii
->val_out
& BMSR_LSTATUS
;
481 /* If reporting, report that either there's no dev->do_ioctl,
482 * or both SIOCGMIIREG and get_link failed (meaning that we
483 * cannot report link status). If not reporting, pretend
486 return reporting
? -1 : BMSR_LSTATUS
;
489 /*----------------------------- Multicast list ------------------------------*/
491 /* Push the promiscuity flag down to appropriate slaves */
492 static int bond_set_promiscuity(struct bonding
*bond
, int inc
)
494 struct list_head
*iter
;
497 if (bond_uses_primary(bond
)) {
498 struct slave
*curr_active
= rtnl_dereference(bond
->curr_active_slave
);
501 err
= dev_set_promiscuity(curr_active
->dev
, inc
);
505 bond_for_each_slave(bond
, slave
, iter
) {
506 err
= dev_set_promiscuity(slave
->dev
, inc
);
514 /* Push the allmulti flag down to all slaves */
515 static int bond_set_allmulti(struct bonding
*bond
, int inc
)
517 struct list_head
*iter
;
520 if (bond_uses_primary(bond
)) {
521 struct slave
*curr_active
= rtnl_dereference(bond
->curr_active_slave
);
524 err
= dev_set_allmulti(curr_active
->dev
, inc
);
528 bond_for_each_slave(bond
, slave
, iter
) {
529 err
= dev_set_allmulti(slave
->dev
, inc
);
537 /* Retrieve the list of registered multicast addresses for the bonding
538 * device and retransmit an IGMP JOIN request to the current active
541 static void bond_resend_igmp_join_requests_delayed(struct work_struct
*work
)
543 struct bonding
*bond
= container_of(work
, struct bonding
,
546 if (!rtnl_trylock()) {
547 queue_delayed_work(bond
->wq
, &bond
->mcast_work
, 1);
550 call_netdevice_notifiers(NETDEV_RESEND_IGMP
, bond
->dev
);
552 if (bond
->igmp_retrans
> 1) {
553 bond
->igmp_retrans
--;
554 queue_delayed_work(bond
->wq
, &bond
->mcast_work
, HZ
/5);
559 /* Flush bond's hardware addresses from slave */
560 static void bond_hw_addr_flush(struct net_device
*bond_dev
,
561 struct net_device
*slave_dev
)
563 struct bonding
*bond
= netdev_priv(bond_dev
);
565 dev_uc_unsync(slave_dev
, bond_dev
);
566 dev_mc_unsync(slave_dev
, bond_dev
);
568 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
569 /* del lacpdu mc addr from mc list */
570 u8 lacpdu_multicast
[ETH_ALEN
] = MULTICAST_LACPDU_ADDR
;
572 dev_mc_del(slave_dev
, lacpdu_multicast
);
576 /*--------------------------- Active slave change ---------------------------*/
578 /* Update the hardware address list and promisc/allmulti for the new and
579 * old active slaves (if any). Modes that are not using primary keep all
580 * slaves up date at all times; only the modes that use primary need to call
581 * this function to swap these settings during a failover.
583 static void bond_hw_addr_swap(struct bonding
*bond
, struct slave
*new_active
,
584 struct slave
*old_active
)
587 if (bond
->dev
->flags
& IFF_PROMISC
)
588 dev_set_promiscuity(old_active
->dev
, -1);
590 if (bond
->dev
->flags
& IFF_ALLMULTI
)
591 dev_set_allmulti(old_active
->dev
, -1);
593 bond_hw_addr_flush(bond
->dev
, old_active
->dev
);
597 /* FIXME: Signal errors upstream. */
598 if (bond
->dev
->flags
& IFF_PROMISC
)
599 dev_set_promiscuity(new_active
->dev
, 1);
601 if (bond
->dev
->flags
& IFF_ALLMULTI
)
602 dev_set_allmulti(new_active
->dev
, 1);
604 netif_addr_lock_bh(bond
->dev
);
605 dev_uc_sync(new_active
->dev
, bond
->dev
);
606 dev_mc_sync(new_active
->dev
, bond
->dev
);
607 netif_addr_unlock_bh(bond
->dev
);
612 * bond_set_dev_addr - clone slave's address to bond
613 * @bond_dev: bond net device
614 * @slave_dev: slave net device
616 * Should be called with RTNL held.
618 static void bond_set_dev_addr(struct net_device
*bond_dev
,
619 struct net_device
*slave_dev
)
621 netdev_dbg(bond_dev
, "bond_dev=%p slave_dev=%p slave_dev->name=%s slave_dev->addr_len=%d\n",
622 bond_dev
, slave_dev
, slave_dev
->name
, slave_dev
->addr_len
);
623 memcpy(bond_dev
->dev_addr
, slave_dev
->dev_addr
, slave_dev
->addr_len
);
624 bond_dev
->addr_assign_type
= NET_ADDR_STOLEN
;
625 call_netdevice_notifiers(NETDEV_CHANGEADDR
, bond_dev
);
628 static struct slave
*bond_get_old_active(struct bonding
*bond
,
629 struct slave
*new_active
)
632 struct list_head
*iter
;
634 bond_for_each_slave(bond
, slave
, iter
) {
635 if (slave
== new_active
)
638 if (ether_addr_equal(bond
->dev
->dev_addr
, slave
->dev
->dev_addr
))
645 /* bond_do_fail_over_mac
647 * Perform special MAC address swapping for fail_over_mac settings
651 static void bond_do_fail_over_mac(struct bonding
*bond
,
652 struct slave
*new_active
,
653 struct slave
*old_active
)
655 u8 tmp_mac
[ETH_ALEN
];
656 struct sockaddr saddr
;
659 switch (bond
->params
.fail_over_mac
) {
660 case BOND_FOM_ACTIVE
:
662 bond_set_dev_addr(bond
->dev
, new_active
->dev
);
664 case BOND_FOM_FOLLOW
:
665 /* if new_active && old_active, swap them
666 * if just old_active, do nothing (going to no active slave)
667 * if just new_active, set new_active to bond's MAC
673 old_active
= bond_get_old_active(bond
, new_active
);
676 ether_addr_copy(tmp_mac
, new_active
->dev
->dev_addr
);
677 ether_addr_copy(saddr
.sa_data
,
678 old_active
->dev
->dev_addr
);
679 saddr
.sa_family
= new_active
->dev
->type
;
681 ether_addr_copy(saddr
.sa_data
, bond
->dev
->dev_addr
);
682 saddr
.sa_family
= bond
->dev
->type
;
685 rv
= dev_set_mac_address(new_active
->dev
, &saddr
);
687 netdev_err(bond
->dev
, "Error %d setting MAC of slave %s\n",
688 -rv
, new_active
->dev
->name
);
695 ether_addr_copy(saddr
.sa_data
, tmp_mac
);
696 saddr
.sa_family
= old_active
->dev
->type
;
698 rv
= dev_set_mac_address(old_active
->dev
, &saddr
);
700 netdev_err(bond
->dev
, "Error %d setting MAC of slave %s\n",
701 -rv
, new_active
->dev
->name
);
705 netdev_err(bond
->dev
, "bond_do_fail_over_mac impossible: bad policy %d\n",
706 bond
->params
.fail_over_mac
);
712 static struct slave
*bond_choose_primary_or_current(struct bonding
*bond
)
714 struct slave
*prim
= rtnl_dereference(bond
->primary_slave
);
715 struct slave
*curr
= rtnl_dereference(bond
->curr_active_slave
);
717 if (!prim
|| prim
->link
!= BOND_LINK_UP
) {
718 if (!curr
|| curr
->link
!= BOND_LINK_UP
)
723 if (bond
->force_primary
) {
724 bond
->force_primary
= false;
728 if (!curr
|| curr
->link
!= BOND_LINK_UP
)
731 /* At this point, prim and curr are both up */
732 switch (bond
->params
.primary_reselect
) {
733 case BOND_PRI_RESELECT_ALWAYS
:
735 case BOND_PRI_RESELECT_BETTER
:
736 if (prim
->speed
< curr
->speed
)
738 if (prim
->speed
== curr
->speed
&& prim
->duplex
<= curr
->duplex
)
741 case BOND_PRI_RESELECT_FAILURE
:
744 netdev_err(bond
->dev
, "impossible primary_reselect %d\n",
745 bond
->params
.primary_reselect
);
751 * bond_find_best_slave - select the best available slave to be the active one
752 * @bond: our bonding struct
754 static struct slave
*bond_find_best_slave(struct bonding
*bond
)
756 struct slave
*slave
, *bestslave
= NULL
;
757 struct list_head
*iter
;
758 int mintime
= bond
->params
.updelay
;
760 slave
= bond_choose_primary_or_current(bond
);
764 bond_for_each_slave(bond
, slave
, iter
) {
765 if (slave
->link
== BOND_LINK_UP
)
767 if (slave
->link
== BOND_LINK_BACK
&& bond_slave_is_up(slave
) &&
768 slave
->delay
< mintime
) {
769 mintime
= slave
->delay
;
777 static bool bond_should_notify_peers(struct bonding
*bond
)
782 slave
= rcu_dereference(bond
->curr_active_slave
);
785 netdev_dbg(bond
->dev
, "bond_should_notify_peers: slave %s\n",
786 slave
? slave
->dev
->name
: "NULL");
788 if (!slave
|| !bond
->send_peer_notif
||
789 !netif_carrier_ok(bond
->dev
) ||
790 test_bit(__LINK_STATE_LINKWATCH_PENDING
, &slave
->dev
->state
))
797 * change_active_interface - change the active slave into the specified one
798 * @bond: our bonding struct
799 * @new: the new slave to make the active one
801 * Set the new slave to the bond's settings and unset them on the old
803 * Setting include flags, mc-list, promiscuity, allmulti, etc.
805 * If @new's link state is %BOND_LINK_BACK we'll set it to %BOND_LINK_UP,
806 * because it is apparently the best available slave we have, even though its
807 * updelay hasn't timed out yet.
809 * Caller must hold RTNL.
811 void bond_change_active_slave(struct bonding
*bond
, struct slave
*new_active
)
813 struct slave
*old_active
;
817 old_active
= rtnl_dereference(bond
->curr_active_slave
);
819 if (old_active
== new_active
)
823 new_active
->last_link_up
= jiffies
;
825 if (new_active
->link
== BOND_LINK_BACK
) {
826 if (bond_uses_primary(bond
)) {
827 netdev_info(bond
->dev
, "making interface %s the new active one %d ms earlier\n",
828 new_active
->dev
->name
,
829 (bond
->params
.updelay
- new_active
->delay
) * bond
->params
.miimon
);
832 new_active
->delay
= 0;
833 bond_set_slave_link_state(new_active
, BOND_LINK_UP
,
834 BOND_SLAVE_NOTIFY_NOW
);
836 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
837 bond_3ad_handle_link_change(new_active
, BOND_LINK_UP
);
839 if (bond_is_lb(bond
))
840 bond_alb_handle_link_change(bond
, new_active
, BOND_LINK_UP
);
842 if (bond_uses_primary(bond
)) {
843 netdev_info(bond
->dev
, "making interface %s the new active one\n",
844 new_active
->dev
->name
);
849 if (bond_uses_primary(bond
))
850 bond_hw_addr_swap(bond
, new_active
, old_active
);
852 if (bond_is_lb(bond
)) {
853 bond_alb_handle_active_change(bond
, new_active
);
855 bond_set_slave_inactive_flags(old_active
,
856 BOND_SLAVE_NOTIFY_NOW
);
858 bond_set_slave_active_flags(new_active
,
859 BOND_SLAVE_NOTIFY_NOW
);
861 rcu_assign_pointer(bond
->curr_active_slave
, new_active
);
864 if (BOND_MODE(bond
) == BOND_MODE_ACTIVEBACKUP
) {
866 bond_set_slave_inactive_flags(old_active
,
867 BOND_SLAVE_NOTIFY_NOW
);
870 bool should_notify_peers
= false;
872 bond_set_slave_active_flags(new_active
,
873 BOND_SLAVE_NOTIFY_NOW
);
875 if (bond
->params
.fail_over_mac
)
876 bond_do_fail_over_mac(bond
, new_active
,
879 if (netif_running(bond
->dev
)) {
880 bond
->send_peer_notif
=
881 bond
->params
.num_peer_notif
;
882 should_notify_peers
=
883 bond_should_notify_peers(bond
);
886 call_netdevice_notifiers(NETDEV_BONDING_FAILOVER
, bond
->dev
);
887 if (should_notify_peers
)
888 call_netdevice_notifiers(NETDEV_NOTIFY_PEERS
,
893 /* resend IGMP joins since active slave has changed or
894 * all were sent on curr_active_slave.
895 * resend only if bond is brought up with the affected
896 * bonding modes and the retransmission is enabled
898 if (netif_running(bond
->dev
) && (bond
->params
.resend_igmp
> 0) &&
899 ((bond_uses_primary(bond
) && new_active
) ||
900 BOND_MODE(bond
) == BOND_MODE_ROUNDROBIN
)) {
901 bond
->igmp_retrans
= bond
->params
.resend_igmp
;
902 queue_delayed_work(bond
->wq
, &bond
->mcast_work
, 1);
907 * bond_select_active_slave - select a new active slave, if needed
908 * @bond: our bonding struct
910 * This functions should be called when one of the following occurs:
911 * - The old curr_active_slave has been released or lost its link.
912 * - The primary_slave has got its link back.
913 * - A slave has got its link back and there's no old curr_active_slave.
915 * Caller must hold RTNL.
917 void bond_select_active_slave(struct bonding
*bond
)
919 struct slave
*best_slave
;
924 best_slave
= bond_find_best_slave(bond
);
925 if (best_slave
!= rtnl_dereference(bond
->curr_active_slave
)) {
926 bond_change_active_slave(bond
, best_slave
);
927 rv
= bond_set_carrier(bond
);
931 if (netif_carrier_ok(bond
->dev
))
932 netdev_info(bond
->dev
, "first active interface up!\n");
934 netdev_info(bond
->dev
, "now running without any active interface!\n");
938 #ifdef CONFIG_NET_POLL_CONTROLLER
939 static inline int slave_enable_netpoll(struct slave
*slave
)
944 np
= kzalloc(sizeof(*np
), GFP_KERNEL
);
949 err
= __netpoll_setup(np
, slave
->dev
);
958 static inline void slave_disable_netpoll(struct slave
*slave
)
960 struct netpoll
*np
= slave
->np
;
966 __netpoll_free_async(np
);
969 static void bond_poll_controller(struct net_device
*bond_dev
)
971 struct bonding
*bond
= netdev_priv(bond_dev
);
972 struct slave
*slave
= NULL
;
973 struct list_head
*iter
;
974 struct ad_info ad_info
;
975 struct netpoll_info
*ni
;
976 const struct net_device_ops
*ops
;
978 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
979 if (bond_3ad_get_active_agg_info(bond
, &ad_info
))
982 bond_for_each_slave_rcu(bond
, slave
, iter
) {
983 ops
= slave
->dev
->netdev_ops
;
984 if (!bond_slave_is_up(slave
) || !ops
->ndo_poll_controller
)
987 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
988 struct aggregator
*agg
=
989 SLAVE_AD_INFO(slave
)->port
.aggregator
;
992 agg
->aggregator_identifier
!= ad_info
.aggregator_id
)
996 ni
= rcu_dereference_bh(slave
->dev
->npinfo
);
997 if (down_trylock(&ni
->dev_lock
))
999 ops
->ndo_poll_controller(slave
->dev
);
1004 static void bond_netpoll_cleanup(struct net_device
*bond_dev
)
1006 struct bonding
*bond
= netdev_priv(bond_dev
);
1007 struct list_head
*iter
;
1008 struct slave
*slave
;
1010 bond_for_each_slave(bond
, slave
, iter
)
1011 if (bond_slave_is_up(slave
))
1012 slave_disable_netpoll(slave
);
1015 static int bond_netpoll_setup(struct net_device
*dev
, struct netpoll_info
*ni
)
1017 struct bonding
*bond
= netdev_priv(dev
);
1018 struct list_head
*iter
;
1019 struct slave
*slave
;
1022 bond_for_each_slave(bond
, slave
, iter
) {
1023 err
= slave_enable_netpoll(slave
);
1025 bond_netpoll_cleanup(dev
);
1032 static inline int slave_enable_netpoll(struct slave
*slave
)
1036 static inline void slave_disable_netpoll(struct slave
*slave
)
1039 static void bond_netpoll_cleanup(struct net_device
*bond_dev
)
1044 /*---------------------------------- IOCTL ----------------------------------*/
1046 static netdev_features_t
bond_fix_features(struct net_device
*dev
,
1047 netdev_features_t features
)
1049 struct bonding
*bond
= netdev_priv(dev
);
1050 struct list_head
*iter
;
1051 netdev_features_t mask
;
1052 struct slave
*slave
;
1056 features
&= ~NETIF_F_ONE_FOR_ALL
;
1057 features
|= NETIF_F_ALL_FOR_ALL
;
1059 bond_for_each_slave(bond
, slave
, iter
) {
1060 features
= netdev_increment_features(features
,
1061 slave
->dev
->features
,
1064 features
= netdev_add_tso_features(features
, mask
);
1069 #define BOND_VLAN_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
1070 NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
1071 NETIF_F_HIGHDMA | NETIF_F_LRO)
1073 #define BOND_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
1074 NETIF_F_RXCSUM | NETIF_F_ALL_TSO)
1076 static void bond_compute_features(struct bonding
*bond
)
1078 unsigned int dst_release_flag
= IFF_XMIT_DST_RELEASE
|
1079 IFF_XMIT_DST_RELEASE_PERM
;
1080 netdev_features_t vlan_features
= BOND_VLAN_FEATURES
;
1081 netdev_features_t enc_features
= BOND_ENC_FEATURES
;
1082 struct net_device
*bond_dev
= bond
->dev
;
1083 struct list_head
*iter
;
1084 struct slave
*slave
;
1085 unsigned short max_hard_header_len
= ETH_HLEN
;
1086 unsigned int gso_max_size
= GSO_MAX_SIZE
;
1087 u16 gso_max_segs
= GSO_MAX_SEGS
;
1089 if (!bond_has_slaves(bond
))
1091 vlan_features
&= NETIF_F_ALL_FOR_ALL
;
1093 bond_for_each_slave(bond
, slave
, iter
) {
1094 vlan_features
= netdev_increment_features(vlan_features
,
1095 slave
->dev
->vlan_features
, BOND_VLAN_FEATURES
);
1097 enc_features
= netdev_increment_features(enc_features
,
1098 slave
->dev
->hw_enc_features
,
1100 dst_release_flag
&= slave
->dev
->priv_flags
;
1101 if (slave
->dev
->hard_header_len
> max_hard_header_len
)
1102 max_hard_header_len
= slave
->dev
->hard_header_len
;
1104 gso_max_size
= min(gso_max_size
, slave
->dev
->gso_max_size
);
1105 gso_max_segs
= min(gso_max_segs
, slave
->dev
->gso_max_segs
);
1109 bond_dev
->vlan_features
= vlan_features
;
1110 bond_dev
->hw_enc_features
= enc_features
| NETIF_F_GSO_ENCAP_ALL
;
1111 bond_dev
->hard_header_len
= max_hard_header_len
;
1112 bond_dev
->gso_max_segs
= gso_max_segs
;
1113 netif_set_gso_max_size(bond_dev
, gso_max_size
);
1115 bond_dev
->priv_flags
&= ~IFF_XMIT_DST_RELEASE
;
1116 if ((bond_dev
->priv_flags
& IFF_XMIT_DST_RELEASE_PERM
) &&
1117 dst_release_flag
== (IFF_XMIT_DST_RELEASE
| IFF_XMIT_DST_RELEASE_PERM
))
1118 bond_dev
->priv_flags
|= IFF_XMIT_DST_RELEASE
;
1120 netdev_change_features(bond_dev
);
1123 static void bond_setup_by_slave(struct net_device
*bond_dev
,
1124 struct net_device
*slave_dev
)
1126 bond_dev
->header_ops
= slave_dev
->header_ops
;
1128 bond_dev
->type
= slave_dev
->type
;
1129 bond_dev
->hard_header_len
= slave_dev
->hard_header_len
;
1130 bond_dev
->addr_len
= slave_dev
->addr_len
;
1132 memcpy(bond_dev
->broadcast
, slave_dev
->broadcast
,
1133 slave_dev
->addr_len
);
1136 /* On bonding slaves other than the currently active slave, suppress
1137 * duplicates except for alb non-mcast/bcast.
1139 static bool bond_should_deliver_exact_match(struct sk_buff
*skb
,
1140 struct slave
*slave
,
1141 struct bonding
*bond
)
1143 if (bond_is_slave_inactive(slave
)) {
1144 if (BOND_MODE(bond
) == BOND_MODE_ALB
&&
1145 skb
->pkt_type
!= PACKET_BROADCAST
&&
1146 skb
->pkt_type
!= PACKET_MULTICAST
)
1153 static rx_handler_result_t
bond_handle_frame(struct sk_buff
**pskb
)
1155 struct sk_buff
*skb
= *pskb
;
1156 struct slave
*slave
;
1157 struct bonding
*bond
;
1158 int (*recv_probe
)(const struct sk_buff
*, struct bonding
*,
1160 int ret
= RX_HANDLER_ANOTHER
;
1162 skb
= skb_share_check(skb
, GFP_ATOMIC
);
1164 return RX_HANDLER_CONSUMED
;
1168 slave
= bond_slave_get_rcu(skb
->dev
);
1171 recv_probe
= ACCESS_ONCE(bond
->recv_probe
);
1173 ret
= recv_probe(skb
, bond
, slave
);
1174 if (ret
== RX_HANDLER_CONSUMED
) {
1180 if (bond_should_deliver_exact_match(skb
, slave
, bond
))
1181 return RX_HANDLER_EXACT
;
1183 skb
->dev
= bond
->dev
;
1185 if (BOND_MODE(bond
) == BOND_MODE_ALB
&&
1186 bond
->dev
->priv_flags
& IFF_BRIDGE_PORT
&&
1187 skb
->pkt_type
== PACKET_HOST
) {
1189 if (unlikely(skb_cow_head(skb
,
1190 skb
->data
- skb_mac_header(skb
)))) {
1192 return RX_HANDLER_CONSUMED
;
1194 ether_addr_copy(eth_hdr(skb
)->h_dest
, bond
->dev
->dev_addr
);
1200 static enum netdev_lag_tx_type
bond_lag_tx_type(struct bonding
*bond
)
1202 switch (BOND_MODE(bond
)) {
1203 case BOND_MODE_ROUNDROBIN
:
1204 return NETDEV_LAG_TX_TYPE_ROUNDROBIN
;
1205 case BOND_MODE_ACTIVEBACKUP
:
1206 return NETDEV_LAG_TX_TYPE_ACTIVEBACKUP
;
1207 case BOND_MODE_BROADCAST
:
1208 return NETDEV_LAG_TX_TYPE_BROADCAST
;
1210 case BOND_MODE_8023AD
:
1211 return NETDEV_LAG_TX_TYPE_HASH
;
1213 return NETDEV_LAG_TX_TYPE_UNKNOWN
;
1217 static int bond_master_upper_dev_link(struct bonding
*bond
, struct slave
*slave
)
1219 struct netdev_lag_upper_info lag_upper_info
;
1222 lag_upper_info
.tx_type
= bond_lag_tx_type(bond
);
1223 err
= netdev_master_upper_dev_link(slave
->dev
, bond
->dev
, slave
,
1227 rtmsg_ifinfo(RTM_NEWLINK
, slave
->dev
, IFF_SLAVE
, GFP_KERNEL
);
1231 static void bond_upper_dev_unlink(struct bonding
*bond
, struct slave
*slave
)
1233 netdev_upper_dev_unlink(slave
->dev
, bond
->dev
);
1234 slave
->dev
->flags
&= ~IFF_SLAVE
;
1235 rtmsg_ifinfo(RTM_NEWLINK
, slave
->dev
, IFF_SLAVE
, GFP_KERNEL
);
1238 static struct slave
*bond_alloc_slave(struct bonding
*bond
)
1240 struct slave
*slave
= NULL
;
1242 slave
= kzalloc(sizeof(*slave
), GFP_KERNEL
);
1246 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
1247 SLAVE_AD_INFO(slave
) = kzalloc(sizeof(struct ad_slave_info
),
1249 if (!SLAVE_AD_INFO(slave
)) {
1257 static void bond_free_slave(struct slave
*slave
)
1259 struct bonding
*bond
= bond_get_bond_by_slave(slave
);
1261 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
1262 kfree(SLAVE_AD_INFO(slave
));
1267 static void bond_fill_ifbond(struct bonding
*bond
, struct ifbond
*info
)
1269 info
->bond_mode
= BOND_MODE(bond
);
1270 info
->miimon
= bond
->params
.miimon
;
1271 info
->num_slaves
= bond
->slave_cnt
;
1274 static void bond_fill_ifslave(struct slave
*slave
, struct ifslave
*info
)
1276 strcpy(info
->slave_name
, slave
->dev
->name
);
1277 info
->link
= slave
->link
;
1278 info
->state
= bond_slave_state(slave
);
1279 info
->link_failure_count
= slave
->link_failure_count
;
1282 static void bond_netdev_notify(struct net_device
*dev
,
1283 struct netdev_bonding_info
*info
)
1286 netdev_bonding_info_change(dev
, info
);
1290 static void bond_netdev_notify_work(struct work_struct
*_work
)
1292 struct netdev_notify_work
*w
=
1293 container_of(_work
, struct netdev_notify_work
, work
.work
);
1295 bond_netdev_notify(w
->dev
, &w
->bonding_info
);
1300 void bond_queue_slave_event(struct slave
*slave
)
1302 struct bonding
*bond
= slave
->bond
;
1303 struct netdev_notify_work
*nnw
= kzalloc(sizeof(*nnw
), GFP_ATOMIC
);
1308 dev_hold(slave
->dev
);
1309 nnw
->dev
= slave
->dev
;
1310 bond_fill_ifslave(slave
, &nnw
->bonding_info
.slave
);
1311 bond_fill_ifbond(bond
, &nnw
->bonding_info
.master
);
1312 INIT_DELAYED_WORK(&nnw
->work
, bond_netdev_notify_work
);
1314 queue_delayed_work(slave
->bond
->wq
, &nnw
->work
, 0);
1317 void bond_lower_state_changed(struct slave
*slave
)
1319 struct netdev_lag_lower_state_info info
;
1321 info
.link_up
= slave
->link
== BOND_LINK_UP
||
1322 slave
->link
== BOND_LINK_FAIL
;
1323 info
.tx_enabled
= bond_is_active_slave(slave
);
1324 netdev_lower_state_changed(slave
->dev
, &info
);
1327 /* enslave device <slave> to bond device <master> */
1328 int bond_enslave(struct net_device
*bond_dev
, struct net_device
*slave_dev
)
1330 struct bonding
*bond
= netdev_priv(bond_dev
);
1331 const struct net_device_ops
*slave_ops
= slave_dev
->netdev_ops
;
1332 struct slave
*new_slave
= NULL
, *prev_slave
;
1333 struct sockaddr addr
;
1337 if (!bond
->params
.use_carrier
&&
1338 slave_dev
->ethtool_ops
->get_link
== NULL
&&
1339 slave_ops
->ndo_do_ioctl
== NULL
) {
1340 netdev_warn(bond_dev
, "no link monitoring support for %s\n",
1344 /* already enslaved */
1345 if (slave_dev
->flags
& IFF_SLAVE
) {
1346 netdev_dbg(bond_dev
, "Error: Device was already enslaved\n");
1350 if (bond_dev
== slave_dev
) {
1351 netdev_err(bond_dev
, "cannot enslave bond to itself.\n");
1355 /* vlan challenged mutual exclusion */
1356 /* no need to lock since we're protected by rtnl_lock */
1357 if (slave_dev
->features
& NETIF_F_VLAN_CHALLENGED
) {
1358 netdev_dbg(bond_dev
, "%s is NETIF_F_VLAN_CHALLENGED\n",
1360 if (vlan_uses_dev(bond_dev
)) {
1361 netdev_err(bond_dev
, "Error: cannot enslave VLAN challenged slave %s on VLAN enabled bond %s\n",
1362 slave_dev
->name
, bond_dev
->name
);
1365 netdev_warn(bond_dev
, "enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
1366 slave_dev
->name
, slave_dev
->name
,
1370 netdev_dbg(bond_dev
, "%s is !NETIF_F_VLAN_CHALLENGED\n",
1374 /* Old ifenslave binaries are no longer supported. These can
1375 * be identified with moderate accuracy by the state of the slave:
1376 * the current ifenslave will set the interface down prior to
1377 * enslaving it; the old ifenslave will not.
1379 if (slave_dev
->flags
& IFF_UP
) {
1380 netdev_err(bond_dev
, "%s is up - this may be due to an out of date ifenslave\n",
1385 /* set bonding device ether type by slave - bonding netdevices are
1386 * created with ether_setup, so when the slave type is not ARPHRD_ETHER
1387 * there is a need to override some of the type dependent attribs/funcs.
1389 * bond ether type mutual exclusion - don't allow slaves of dissimilar
1390 * ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
1392 if (!bond_has_slaves(bond
)) {
1393 if (bond_dev
->type
!= slave_dev
->type
) {
1394 netdev_dbg(bond_dev
, "change device type from %d to %d\n",
1395 bond_dev
->type
, slave_dev
->type
);
1397 res
= call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE
,
1399 res
= notifier_to_errno(res
);
1401 netdev_err(bond_dev
, "refused to change device type\n");
1405 /* Flush unicast and multicast addresses */
1406 dev_uc_flush(bond_dev
);
1407 dev_mc_flush(bond_dev
);
1409 if (slave_dev
->type
!= ARPHRD_ETHER
)
1410 bond_setup_by_slave(bond_dev
, slave_dev
);
1412 ether_setup(bond_dev
);
1413 bond_dev
->priv_flags
&= ~IFF_TX_SKB_SHARING
;
1416 call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE
,
1419 } else if (bond_dev
->type
!= slave_dev
->type
) {
1420 netdev_err(bond_dev
, "%s ether type (%d) is different from other slaves (%d), can not enslave it\n",
1421 slave_dev
->name
, slave_dev
->type
, bond_dev
->type
);
1425 if (slave_ops
->ndo_set_mac_address
== NULL
) {
1426 netdev_warn(bond_dev
, "The slave device specified does not support setting the MAC address\n");
1427 if (BOND_MODE(bond
) == BOND_MODE_ACTIVEBACKUP
&&
1428 bond
->params
.fail_over_mac
!= BOND_FOM_ACTIVE
) {
1429 if (!bond_has_slaves(bond
)) {
1430 bond
->params
.fail_over_mac
= BOND_FOM_ACTIVE
;
1431 netdev_warn(bond_dev
, "Setting fail_over_mac to active for active-backup mode\n");
1433 netdev_err(bond_dev
, "The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active\n");
1435 goto err_undo_flags
;
1440 call_netdevice_notifiers(NETDEV_JOIN
, slave_dev
);
1442 /* If this is the first slave, then we need to set the master's hardware
1443 * address to be the same as the slave's.
1445 if (!bond_has_slaves(bond
) &&
1446 bond
->dev
->addr_assign_type
== NET_ADDR_RANDOM
)
1447 bond_set_dev_addr(bond
->dev
, slave_dev
);
1449 new_slave
= bond_alloc_slave(bond
);
1452 goto err_undo_flags
;
1455 new_slave
->bond
= bond
;
1456 new_slave
->dev
= slave_dev
;
1457 /* Set the new_slave's queue_id to be zero. Queue ID mapping
1458 * is set via sysfs or module option if desired.
1460 new_slave
->queue_id
= 0;
1462 /* Save slave's original mtu and then set it to match the bond */
1463 new_slave
->original_mtu
= slave_dev
->mtu
;
1464 res
= dev_set_mtu(slave_dev
, bond
->dev
->mtu
);
1466 netdev_dbg(bond_dev
, "Error %d calling dev_set_mtu\n", res
);
1470 /* Save slave's original ("permanent") mac address for modes
1471 * that need it, and for restoring it upon release, and then
1472 * set it to the master's address
1474 ether_addr_copy(new_slave
->perm_hwaddr
, slave_dev
->dev_addr
);
1476 if (!bond
->params
.fail_over_mac
||
1477 BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
) {
1478 /* Set slave to master's mac address. The application already
1479 * set the master's mac address to that of the first slave
1481 memcpy(addr
.sa_data
, bond_dev
->dev_addr
, bond_dev
->addr_len
);
1482 addr
.sa_family
= slave_dev
->type
;
1483 res
= dev_set_mac_address(slave_dev
, &addr
);
1485 netdev_dbg(bond_dev
, "Error %d calling set_mac_address\n", res
);
1486 goto err_restore_mtu
;
1490 /* set slave flag before open to prevent IPv6 addrconf */
1491 slave_dev
->flags
|= IFF_SLAVE
;
1493 /* open the slave since the application closed it */
1494 res
= dev_open(slave_dev
);
1496 netdev_dbg(bond_dev
, "Opening slave %s failed\n", slave_dev
->name
);
1497 goto err_restore_mac
;
1500 slave_dev
->priv_flags
|= IFF_BONDING
;
1501 /* initialize slave stats */
1502 dev_get_stats(new_slave
->dev
, &new_slave
->slave_stats
);
1504 if (bond_is_lb(bond
)) {
1505 /* bond_alb_init_slave() must be called before all other stages since
1506 * it might fail and we do not want to have to undo everything
1508 res
= bond_alb_init_slave(bond
, new_slave
);
1513 /* If the mode uses primary, then the following is handled by
1514 * bond_change_active_slave().
1516 if (!bond_uses_primary(bond
)) {
1517 /* set promiscuity level to new slave */
1518 if (bond_dev
->flags
& IFF_PROMISC
) {
1519 res
= dev_set_promiscuity(slave_dev
, 1);
1524 /* set allmulti level to new slave */
1525 if (bond_dev
->flags
& IFF_ALLMULTI
) {
1526 res
= dev_set_allmulti(slave_dev
, 1);
1531 netif_addr_lock_bh(bond_dev
);
1533 dev_mc_sync_multiple(slave_dev
, bond_dev
);
1534 dev_uc_sync_multiple(slave_dev
, bond_dev
);
1536 netif_addr_unlock_bh(bond_dev
);
1539 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
1540 /* add lacpdu mc addr to mc list */
1541 u8 lacpdu_multicast
[ETH_ALEN
] = MULTICAST_LACPDU_ADDR
;
1543 dev_mc_add(slave_dev
, lacpdu_multicast
);
1546 res
= vlan_vids_add_by_dev(slave_dev
, bond_dev
);
1548 netdev_err(bond_dev
, "Couldn't add bond vlan ids to %s\n",
1553 prev_slave
= bond_last_slave(bond
);
1555 new_slave
->delay
= 0;
1556 new_slave
->link_failure_count
= 0;
1558 bond_update_speed_duplex(new_slave
);
1560 new_slave
->last_rx
= jiffies
-
1561 (msecs_to_jiffies(bond
->params
.arp_interval
) + 1);
1562 for (i
= 0; i
< BOND_MAX_ARP_TARGETS
; i
++)
1563 new_slave
->target_last_arp_rx
[i
] = new_slave
->last_rx
;
1565 if (bond
->params
.miimon
&& !bond
->params
.use_carrier
) {
1566 link_reporting
= bond_check_dev_link(bond
, slave_dev
, 1);
1568 if ((link_reporting
== -1) && !bond
->params
.arp_interval
) {
1569 /* miimon is set but a bonded network driver
1570 * does not support ETHTOOL/MII and
1571 * arp_interval is not set. Note: if
1572 * use_carrier is enabled, we will never go
1573 * here (because netif_carrier is always
1574 * supported); thus, we don't need to change
1575 * the messages for netif_carrier.
1577 netdev_warn(bond_dev
, "MII and ETHTOOL support not available for interface %s, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details\n",
1579 } else if (link_reporting
== -1) {
1580 /* unable get link status using mii/ethtool */
1581 netdev_warn(bond_dev
, "can't get link status from interface %s; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface\n",
1586 /* check for initial state */
1587 new_slave
->link
= BOND_LINK_NOCHANGE
;
1588 if (bond
->params
.miimon
) {
1589 if (bond_check_dev_link(bond
, slave_dev
, 0) == BMSR_LSTATUS
) {
1590 if (bond
->params
.updelay
) {
1591 bond_set_slave_link_state(new_slave
,
1593 BOND_SLAVE_NOTIFY_NOW
);
1594 new_slave
->delay
= bond
->params
.updelay
;
1596 bond_set_slave_link_state(new_slave
,
1598 BOND_SLAVE_NOTIFY_NOW
);
1601 bond_set_slave_link_state(new_slave
, BOND_LINK_DOWN
,
1602 BOND_SLAVE_NOTIFY_NOW
);
1604 } else if (bond
->params
.arp_interval
) {
1605 bond_set_slave_link_state(new_slave
,
1606 (netif_carrier_ok(slave_dev
) ?
1607 BOND_LINK_UP
: BOND_LINK_DOWN
),
1608 BOND_SLAVE_NOTIFY_NOW
);
1610 bond_set_slave_link_state(new_slave
, BOND_LINK_UP
,
1611 BOND_SLAVE_NOTIFY_NOW
);
1614 if (new_slave
->link
!= BOND_LINK_DOWN
)
1615 new_slave
->last_link_up
= jiffies
;
1616 netdev_dbg(bond_dev
, "Initial state of slave_dev is BOND_LINK_%s\n",
1617 new_slave
->link
== BOND_LINK_DOWN
? "DOWN" :
1618 (new_slave
->link
== BOND_LINK_UP
? "UP" : "BACK"));
1620 if (bond_uses_primary(bond
) && bond
->params
.primary
[0]) {
1621 /* if there is a primary slave, remember it */
1622 if (strcmp(bond
->params
.primary
, new_slave
->dev
->name
) == 0) {
1623 rcu_assign_pointer(bond
->primary_slave
, new_slave
);
1624 bond
->force_primary
= true;
1628 switch (BOND_MODE(bond
)) {
1629 case BOND_MODE_ACTIVEBACKUP
:
1630 bond_set_slave_inactive_flags(new_slave
,
1631 BOND_SLAVE_NOTIFY_NOW
);
1633 case BOND_MODE_8023AD
:
1634 /* in 802.3ad mode, the internal mechanism
1635 * will activate the slaves in the selected
1638 bond_set_slave_inactive_flags(new_slave
, BOND_SLAVE_NOTIFY_NOW
);
1639 /* if this is the first slave */
1641 SLAVE_AD_INFO(new_slave
)->id
= 1;
1642 /* Initialize AD with the number of times that the AD timer is called in 1 second
1643 * can be called only after the mac address of the bond is set
1645 bond_3ad_initialize(bond
, 1000/AD_TIMER_INTERVAL
);
1647 SLAVE_AD_INFO(new_slave
)->id
=
1648 SLAVE_AD_INFO(prev_slave
)->id
+ 1;
1651 bond_3ad_bind_slave(new_slave
);
1655 bond_set_active_slave(new_slave
);
1656 bond_set_slave_inactive_flags(new_slave
, BOND_SLAVE_NOTIFY_NOW
);
1659 netdev_dbg(bond_dev
, "This slave is always active in trunk mode\n");
1661 /* always active in trunk mode */
1662 bond_set_active_slave(new_slave
);
1664 /* In trunking mode there is little meaning to curr_active_slave
1665 * anyway (it holds no special properties of the bond device),
1666 * so we can change it without calling change_active_interface()
1668 if (!rcu_access_pointer(bond
->curr_active_slave
) &&
1669 new_slave
->link
== BOND_LINK_UP
)
1670 rcu_assign_pointer(bond
->curr_active_slave
, new_slave
);
1673 } /* switch(bond_mode) */
1675 #ifdef CONFIG_NET_POLL_CONTROLLER
1676 slave_dev
->npinfo
= bond
->dev
->npinfo
;
1677 if (slave_dev
->npinfo
) {
1678 if (slave_enable_netpoll(new_slave
)) {
1679 netdev_info(bond_dev
, "master_dev is using netpoll, but new slave device does not support netpoll\n");
1686 if (!(bond_dev
->features
& NETIF_F_LRO
))
1687 dev_disable_lro(slave_dev
);
1689 res
= netdev_rx_handler_register(slave_dev
, bond_handle_frame
,
1692 netdev_dbg(bond_dev
, "Error %d calling netdev_rx_handler_register\n", res
);
1696 res
= bond_master_upper_dev_link(bond
, new_slave
);
1698 netdev_dbg(bond_dev
, "Error %d calling bond_master_upper_dev_link\n", res
);
1699 goto err_unregister
;
1702 res
= bond_sysfs_slave_add(new_slave
);
1704 netdev_dbg(bond_dev
, "Error %d calling bond_sysfs_slave_add\n", res
);
1705 goto err_upper_unlink
;
1709 bond_compute_features(bond
);
1710 bond_set_carrier(bond
);
1712 if (bond_uses_primary(bond
)) {
1714 bond_select_active_slave(bond
);
1715 unblock_netpoll_tx();
1718 if (bond_mode_uses_xmit_hash(bond
))
1719 bond_update_slave_arr(bond
, NULL
);
1721 netdev_info(bond_dev
, "Enslaving %s as %s interface with %s link\n",
1723 bond_is_active_slave(new_slave
) ? "an active" : "a backup",
1724 new_slave
->link
!= BOND_LINK_DOWN
? "an up" : "a down");
1726 /* enslave is successful */
1727 bond_queue_slave_event(new_slave
);
1730 /* Undo stages on error */
1732 bond_upper_dev_unlink(bond
, new_slave
);
1735 netdev_rx_handler_unregister(slave_dev
);
1738 if (!bond_uses_primary(bond
))
1739 bond_hw_addr_flush(bond_dev
, slave_dev
);
1741 vlan_vids_del_by_dev(slave_dev
, bond_dev
);
1742 if (rcu_access_pointer(bond
->primary_slave
) == new_slave
)
1743 RCU_INIT_POINTER(bond
->primary_slave
, NULL
);
1744 if (rcu_access_pointer(bond
->curr_active_slave
) == new_slave
) {
1746 bond_change_active_slave(bond
, NULL
);
1747 bond_select_active_slave(bond
);
1748 unblock_netpoll_tx();
1750 /* either primary_slave or curr_active_slave might've changed */
1752 slave_disable_netpoll(new_slave
);
1755 slave_dev
->priv_flags
&= ~IFF_BONDING
;
1756 dev_close(slave_dev
);
1759 slave_dev
->flags
&= ~IFF_SLAVE
;
1760 if (!bond
->params
.fail_over_mac
||
1761 BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
) {
1762 /* XXX TODO - fom follow mode needs to change master's
1763 * MAC if this slave's MAC is in use by the bond, or at
1764 * least print a warning.
1766 ether_addr_copy(addr
.sa_data
, new_slave
->perm_hwaddr
);
1767 addr
.sa_family
= slave_dev
->type
;
1768 dev_set_mac_address(slave_dev
, &addr
);
1772 dev_set_mtu(slave_dev
, new_slave
->original_mtu
);
1775 bond_free_slave(new_slave
);
1778 /* Enslave of first slave has failed and we need to fix master's mac */
1779 if (!bond_has_slaves(bond
)) {
1780 if (ether_addr_equal_64bits(bond_dev
->dev_addr
,
1781 slave_dev
->dev_addr
))
1782 eth_hw_addr_random(bond_dev
);
1783 if (bond_dev
->type
!= ARPHRD_ETHER
) {
1784 dev_close(bond_dev
);
1785 ether_setup(bond_dev
);
1786 bond_dev
->flags
|= IFF_MASTER
;
1787 bond_dev
->priv_flags
&= ~IFF_TX_SKB_SHARING
;
1794 /* Try to release the slave device <slave> from the bond device <master>
1795 * It is legal to access curr_active_slave without a lock because all the function
1796 * is RTNL-locked. If "all" is true it means that the function is being called
1797 * while destroying a bond interface and all slaves are being released.
1799 * The rules for slave state should be:
1800 * for Active/Backup:
1801 * Active stays on all backups go down
1802 * for Bonded connections:
1803 * The first up interface should be left on and all others downed.
1805 static int __bond_release_one(struct net_device
*bond_dev
,
1806 struct net_device
*slave_dev
,
1809 struct bonding
*bond
= netdev_priv(bond_dev
);
1810 struct slave
*slave
, *oldcurrent
;
1811 struct sockaddr addr
;
1812 int old_flags
= bond_dev
->flags
;
1813 netdev_features_t old_features
= bond_dev
->features
;
1815 /* slave is not a slave or master is not master of this slave */
1816 if (!(slave_dev
->flags
& IFF_SLAVE
) ||
1817 !netdev_has_upper_dev(slave_dev
, bond_dev
)) {
1818 netdev_dbg(bond_dev
, "cannot release %s\n",
1825 slave
= bond_get_slave_by_dev(bond
, slave_dev
);
1827 /* not a slave of this bond */
1828 netdev_info(bond_dev
, "%s not enslaved\n",
1830 unblock_netpoll_tx();
1834 bond_set_slave_inactive_flags(slave
, BOND_SLAVE_NOTIFY_NOW
);
1836 bond_sysfs_slave_del(slave
);
1838 /* recompute stats just before removing the slave */
1839 bond_get_stats(bond
->dev
, &bond
->bond_stats
);
1841 bond_upper_dev_unlink(bond
, slave
);
1842 /* unregister rx_handler early so bond_handle_frame wouldn't be called
1843 * for this slave anymore.
1845 netdev_rx_handler_unregister(slave_dev
);
1847 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
1848 bond_3ad_unbind_slave(slave
);
1850 if (bond_mode_uses_xmit_hash(bond
))
1851 bond_update_slave_arr(bond
, slave
);
1853 netdev_info(bond_dev
, "Releasing %s interface %s\n",
1854 bond_is_active_slave(slave
) ? "active" : "backup",
1857 oldcurrent
= rcu_access_pointer(bond
->curr_active_slave
);
1859 RCU_INIT_POINTER(bond
->current_arp_slave
, NULL
);
1861 if (!all
&& (!bond
->params
.fail_over_mac
||
1862 BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
)) {
1863 if (ether_addr_equal_64bits(bond_dev
->dev_addr
, slave
->perm_hwaddr
) &&
1864 bond_has_slaves(bond
))
1865 netdev_warn(bond_dev
, "the permanent HWaddr of %s - %pM - is still in use by %s - set the HWaddr of %s to a different address to avoid conflicts\n",
1866 slave_dev
->name
, slave
->perm_hwaddr
,
1867 bond_dev
->name
, slave_dev
->name
);
1870 if (rtnl_dereference(bond
->primary_slave
) == slave
)
1871 RCU_INIT_POINTER(bond
->primary_slave
, NULL
);
1873 if (oldcurrent
== slave
)
1874 bond_change_active_slave(bond
, NULL
);
1876 if (bond_is_lb(bond
)) {
1877 /* Must be called only after the slave has been
1878 * detached from the list and the curr_active_slave
1879 * has been cleared (if our_slave == old_current),
1880 * but before a new active slave is selected.
1882 bond_alb_deinit_slave(bond
, slave
);
1886 RCU_INIT_POINTER(bond
->curr_active_slave
, NULL
);
1887 } else if (oldcurrent
== slave
) {
1888 /* Note that we hold RTNL over this sequence, so there
1889 * is no concern that another slave add/remove event
1892 bond_select_active_slave(bond
);
1895 if (!bond_has_slaves(bond
)) {
1896 bond_set_carrier(bond
);
1897 eth_hw_addr_random(bond_dev
);
1900 unblock_netpoll_tx();
1904 if (!bond_has_slaves(bond
)) {
1905 call_netdevice_notifiers(NETDEV_CHANGEADDR
, bond
->dev
);
1906 call_netdevice_notifiers(NETDEV_RELEASE
, bond
->dev
);
1909 bond_compute_features(bond
);
1910 if (!(bond_dev
->features
& NETIF_F_VLAN_CHALLENGED
) &&
1911 (old_features
& NETIF_F_VLAN_CHALLENGED
))
1912 netdev_info(bond_dev
, "last VLAN challenged slave %s left bond %s - VLAN blocking is removed\n",
1913 slave_dev
->name
, bond_dev
->name
);
1915 vlan_vids_del_by_dev(slave_dev
, bond_dev
);
1917 /* If the mode uses primary, then this case was handled above by
1918 * bond_change_active_slave(..., NULL)
1920 if (!bond_uses_primary(bond
)) {
1921 /* unset promiscuity level from slave
1922 * NOTE: The NETDEV_CHANGEADDR call above may change the value
1923 * of the IFF_PROMISC flag in the bond_dev, but we need the
1924 * value of that flag before that change, as that was the value
1925 * when this slave was attached, so we cache at the start of the
1926 * function and use it here. Same goes for ALLMULTI below
1928 if (old_flags
& IFF_PROMISC
)
1929 dev_set_promiscuity(slave_dev
, -1);
1931 /* unset allmulti level from slave */
1932 if (old_flags
& IFF_ALLMULTI
)
1933 dev_set_allmulti(slave_dev
, -1);
1935 bond_hw_addr_flush(bond_dev
, slave_dev
);
1938 slave_disable_netpoll(slave
);
1940 /* close slave before restoring its mac address */
1941 dev_close(slave_dev
);
1943 if (bond
->params
.fail_over_mac
!= BOND_FOM_ACTIVE
||
1944 BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
) {
1945 /* restore original ("permanent") mac address */
1946 ether_addr_copy(addr
.sa_data
, slave
->perm_hwaddr
);
1947 addr
.sa_family
= slave_dev
->type
;
1948 dev_set_mac_address(slave_dev
, &addr
);
1951 dev_set_mtu(slave_dev
, slave
->original_mtu
);
1953 slave_dev
->priv_flags
&= ~IFF_BONDING
;
1955 bond_free_slave(slave
);
1960 /* A wrapper used because of ndo_del_link */
1961 int bond_release(struct net_device
*bond_dev
, struct net_device
*slave_dev
)
1963 return __bond_release_one(bond_dev
, slave_dev
, false);
1966 /* First release a slave and then destroy the bond if no more slaves are left.
1967 * Must be under rtnl_lock when this function is called.
1969 static int bond_release_and_destroy(struct net_device
*bond_dev
,
1970 struct net_device
*slave_dev
)
1972 struct bonding
*bond
= netdev_priv(bond_dev
);
1975 ret
= bond_release(bond_dev
, slave_dev
);
1976 if (ret
== 0 && !bond_has_slaves(bond
)) {
1977 bond_dev
->priv_flags
|= IFF_DISABLE_NETPOLL
;
1978 netdev_info(bond_dev
, "Destroying bond %s\n",
1980 bond_remove_proc_entry(bond
);
1981 unregister_netdevice(bond_dev
);
1986 static int bond_info_query(struct net_device
*bond_dev
, struct ifbond
*info
)
1988 struct bonding
*bond
= netdev_priv(bond_dev
);
1989 bond_fill_ifbond(bond
, info
);
1993 static int bond_slave_info_query(struct net_device
*bond_dev
, struct ifslave
*info
)
1995 struct bonding
*bond
= netdev_priv(bond_dev
);
1996 struct list_head
*iter
;
1997 int i
= 0, res
= -ENODEV
;
1998 struct slave
*slave
;
2000 bond_for_each_slave(bond
, slave
, iter
) {
2001 if (i
++ == (int)info
->slave_id
) {
2003 bond_fill_ifslave(slave
, info
);
2011 /*-------------------------------- Monitoring -------------------------------*/
2013 /* called with rcu_read_lock() */
2014 static int bond_miimon_inspect(struct bonding
*bond
)
2016 int link_state
, commit
= 0;
2017 struct list_head
*iter
;
2018 struct slave
*slave
;
2019 bool ignore_updelay
;
2021 ignore_updelay
= !rcu_dereference(bond
->curr_active_slave
);
2023 bond_for_each_slave_rcu(bond
, slave
, iter
) {
2024 slave
->new_link
= BOND_LINK_NOCHANGE
;
2026 link_state
= bond_check_dev_link(bond
, slave
->dev
, 0);
2028 switch (slave
->link
) {
2033 bond_set_slave_link_state(slave
, BOND_LINK_FAIL
,
2034 BOND_SLAVE_NOTIFY_LATER
);
2035 slave
->delay
= bond
->params
.downdelay
;
2037 netdev_info(bond
->dev
, "link status down for %sinterface %s, disabling it in %d ms\n",
2039 BOND_MODE_ACTIVEBACKUP
) ?
2040 (bond_is_active_slave(slave
) ?
2041 "active " : "backup ") : "",
2043 bond
->params
.downdelay
* bond
->params
.miimon
);
2046 case BOND_LINK_FAIL
:
2048 /* recovered before downdelay expired */
2049 bond_set_slave_link_state(slave
, BOND_LINK_UP
,
2050 BOND_SLAVE_NOTIFY_LATER
);
2051 slave
->last_link_up
= jiffies
;
2052 netdev_info(bond
->dev
, "link status up again after %d ms for interface %s\n",
2053 (bond
->params
.downdelay
- slave
->delay
) *
2054 bond
->params
.miimon
,
2059 if (slave
->delay
<= 0) {
2060 slave
->new_link
= BOND_LINK_DOWN
;
2068 case BOND_LINK_DOWN
:
2072 bond_set_slave_link_state(slave
, BOND_LINK_BACK
,
2073 BOND_SLAVE_NOTIFY_LATER
);
2074 slave
->delay
= bond
->params
.updelay
;
2077 netdev_info(bond
->dev
, "link status up for interface %s, enabling it in %d ms\n",
2079 ignore_updelay
? 0 :
2080 bond
->params
.updelay
*
2081 bond
->params
.miimon
);
2084 case BOND_LINK_BACK
:
2086 bond_set_slave_link_state(slave
,
2088 BOND_SLAVE_NOTIFY_LATER
);
2089 netdev_info(bond
->dev
, "link status down again after %d ms for interface %s\n",
2090 (bond
->params
.updelay
- slave
->delay
) *
2091 bond
->params
.miimon
,
2100 if (slave
->delay
<= 0) {
2101 slave
->new_link
= BOND_LINK_UP
;
2103 ignore_updelay
= false;
2115 static void bond_miimon_commit(struct bonding
*bond
)
2117 struct list_head
*iter
;
2118 struct slave
*slave
, *primary
;
2120 bond_for_each_slave(bond
, slave
, iter
) {
2121 switch (slave
->new_link
) {
2122 case BOND_LINK_NOCHANGE
:
2126 bond_update_speed_duplex(slave
);
2127 bond_set_slave_link_state(slave
, BOND_LINK_UP
,
2128 BOND_SLAVE_NOTIFY_NOW
);
2129 slave
->last_link_up
= jiffies
;
2131 primary
= rtnl_dereference(bond
->primary_slave
);
2132 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
2133 /* prevent it from being the active one */
2134 bond_set_backup_slave(slave
);
2135 } else if (BOND_MODE(bond
) != BOND_MODE_ACTIVEBACKUP
) {
2136 /* make it immediately active */
2137 bond_set_active_slave(slave
);
2138 } else if (slave
!= primary
) {
2139 /* prevent it from being the active one */
2140 bond_set_backup_slave(slave
);
2143 netdev_info(bond
->dev
, "link status definitely up for interface %s, %u Mbps %s duplex\n",
2145 slave
->speed
== SPEED_UNKNOWN
? 0 : slave
->speed
,
2146 slave
->duplex
? "full" : "half");
2148 /* notify ad that the link status has changed */
2149 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
2150 bond_3ad_handle_link_change(slave
, BOND_LINK_UP
);
2152 if (bond_is_lb(bond
))
2153 bond_alb_handle_link_change(bond
, slave
,
2156 if (BOND_MODE(bond
) == BOND_MODE_XOR
)
2157 bond_update_slave_arr(bond
, NULL
);
2159 if (!bond
->curr_active_slave
|| slave
== primary
)
2164 case BOND_LINK_DOWN
:
2165 if (slave
->link_failure_count
< UINT_MAX
)
2166 slave
->link_failure_count
++;
2168 bond_set_slave_link_state(slave
, BOND_LINK_DOWN
,
2169 BOND_SLAVE_NOTIFY_NOW
);
2171 if (BOND_MODE(bond
) == BOND_MODE_ACTIVEBACKUP
||
2172 BOND_MODE(bond
) == BOND_MODE_8023AD
)
2173 bond_set_slave_inactive_flags(slave
,
2174 BOND_SLAVE_NOTIFY_NOW
);
2176 netdev_info(bond
->dev
, "link status definitely down for interface %s, disabling it\n",
2179 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
2180 bond_3ad_handle_link_change(slave
,
2183 if (bond_is_lb(bond
))
2184 bond_alb_handle_link_change(bond
, slave
,
2187 if (BOND_MODE(bond
) == BOND_MODE_XOR
)
2188 bond_update_slave_arr(bond
, NULL
);
2190 if (slave
== rcu_access_pointer(bond
->curr_active_slave
))
2196 netdev_err(bond
->dev
, "invalid new link %d on slave %s\n",
2197 slave
->new_link
, slave
->dev
->name
);
2198 slave
->new_link
= BOND_LINK_NOCHANGE
;
2205 bond_select_active_slave(bond
);
2206 unblock_netpoll_tx();
2209 bond_set_carrier(bond
);
2214 * Really a wrapper that splits the mii monitor into two phases: an
2215 * inspection, then (if inspection indicates something needs to be done)
2216 * an acquisition of appropriate locks followed by a commit phase to
2217 * implement whatever link state changes are indicated.
2219 static void bond_mii_monitor(struct work_struct
*work
)
2221 struct bonding
*bond
= container_of(work
, struct bonding
,
2223 bool should_notify_peers
= false;
2224 unsigned long delay
;
2226 delay
= msecs_to_jiffies(bond
->params
.miimon
);
2228 if (!bond_has_slaves(bond
))
2233 should_notify_peers
= bond_should_notify_peers(bond
);
2235 if (bond_miimon_inspect(bond
)) {
2238 /* Race avoidance with bond_close cancel of workqueue */
2239 if (!rtnl_trylock()) {
2241 should_notify_peers
= false;
2245 bond_miimon_commit(bond
);
2247 rtnl_unlock(); /* might sleep, hold no other locks */
2252 if (bond
->params
.miimon
)
2253 queue_delayed_work(bond
->wq
, &bond
->mii_work
, delay
);
2255 if (should_notify_peers
) {
2256 if (!rtnl_trylock())
2258 call_netdevice_notifiers(NETDEV_NOTIFY_PEERS
, bond
->dev
);
2263 static bool bond_has_this_ip(struct bonding
*bond
, __be32 ip
)
2265 struct net_device
*upper
;
2266 struct list_head
*iter
;
2269 if (ip
== bond_confirm_addr(bond
->dev
, 0, ip
))
2273 netdev_for_each_all_upper_dev_rcu(bond
->dev
, upper
, iter
) {
2274 if (ip
== bond_confirm_addr(upper
, 0, ip
)) {
2284 /* We go to the (large) trouble of VLAN tagging ARP frames because
2285 * switches in VLAN mode (especially if ports are configured as
2286 * "native" to a VLAN) might not pass non-tagged frames.
2288 static void bond_arp_send(struct net_device
*slave_dev
, int arp_op
,
2289 __be32 dest_ip
, __be32 src_ip
,
2290 struct bond_vlan_tag
*tags
)
2292 struct sk_buff
*skb
;
2293 struct bond_vlan_tag
*outer_tag
= tags
;
2295 netdev_dbg(slave_dev
, "arp %d on slave %s: dst %pI4 src %pI4\n",
2296 arp_op
, slave_dev
->name
, &dest_ip
, &src_ip
);
2298 skb
= arp_create(arp_op
, ETH_P_ARP
, dest_ip
, slave_dev
, src_ip
,
2299 NULL
, slave_dev
->dev_addr
, NULL
);
2302 net_err_ratelimited("ARP packet allocation failed\n");
2306 if (!tags
|| tags
->vlan_proto
== VLAN_N_VID
)
2311 /* Go through all the tags backwards and add them to the packet */
2312 while (tags
->vlan_proto
!= VLAN_N_VID
) {
2313 if (!tags
->vlan_id
) {
2318 netdev_dbg(slave_dev
, "inner tag: proto %X vid %X\n",
2319 ntohs(outer_tag
->vlan_proto
), tags
->vlan_id
);
2320 skb
= vlan_insert_tag_set_proto(skb
, tags
->vlan_proto
,
2323 net_err_ratelimited("failed to insert inner VLAN tag\n");
2329 /* Set the outer tag */
2330 if (outer_tag
->vlan_id
) {
2331 netdev_dbg(slave_dev
, "outer tag: proto %X vid %X\n",
2332 ntohs(outer_tag
->vlan_proto
), outer_tag
->vlan_id
);
2333 __vlan_hwaccel_put_tag(skb
, outer_tag
->vlan_proto
,
2334 outer_tag
->vlan_id
);
2341 /* Validate the device path between the @start_dev and the @end_dev.
2342 * The path is valid if the @end_dev is reachable through device
2344 * When the path is validated, collect any vlan information in the
2347 struct bond_vlan_tag
*bond_verify_device_path(struct net_device
*start_dev
,
2348 struct net_device
*end_dev
,
2351 struct bond_vlan_tag
*tags
;
2352 struct net_device
*upper
;
2353 struct list_head
*iter
;
2355 if (start_dev
== end_dev
) {
2356 tags
= kzalloc(sizeof(*tags
) * (level
+ 1), GFP_ATOMIC
);
2358 return ERR_PTR(-ENOMEM
);
2359 tags
[level
].vlan_proto
= VLAN_N_VID
;
2363 netdev_for_each_upper_dev_rcu(start_dev
, upper
, iter
) {
2364 tags
= bond_verify_device_path(upper
, end_dev
, level
+ 1);
2365 if (IS_ERR_OR_NULL(tags
)) {
2370 if (is_vlan_dev(upper
)) {
2371 tags
[level
].vlan_proto
= vlan_dev_vlan_proto(upper
);
2372 tags
[level
].vlan_id
= vlan_dev_vlan_id(upper
);
2381 static void bond_arp_send_all(struct bonding
*bond
, struct slave
*slave
)
2384 struct bond_vlan_tag
*tags
;
2385 __be32
*targets
= bond
->params
.arp_targets
, addr
;
2388 for (i
= 0; i
< BOND_MAX_ARP_TARGETS
&& targets
[i
]; i
++) {
2389 netdev_dbg(bond
->dev
, "basa: target %pI4\n", &targets
[i
]);
2392 /* Find out through which dev should the packet go */
2393 rt
= ip_route_output(dev_net(bond
->dev
), targets
[i
], 0,
2396 /* there's no route to target - try to send arp
2397 * probe to generate any traffic (arp_validate=0)
2399 if (bond
->params
.arp_validate
)
2400 net_warn_ratelimited("%s: no route to arp_ip_target %pI4 and arp_validate is set\n",
2403 bond_arp_send(slave
->dev
, ARPOP_REQUEST
, targets
[i
],
2408 /* bond device itself */
2409 if (rt
->dst
.dev
== bond
->dev
)
2413 tags
= bond_verify_device_path(bond
->dev
, rt
->dst
.dev
, 0);
2416 if (!IS_ERR_OR_NULL(tags
))
2419 /* Not our device - skip */
2420 netdev_dbg(bond
->dev
, "no path to arp_ip_target %pI4 via rt.dev %s\n",
2421 &targets
[i
], rt
->dst
.dev
? rt
->dst
.dev
->name
: "NULL");
2427 addr
= bond_confirm_addr(rt
->dst
.dev
, targets
[i
], 0);
2429 bond_arp_send(slave
->dev
, ARPOP_REQUEST
, targets
[i
],
2435 static void bond_validate_arp(struct bonding
*bond
, struct slave
*slave
, __be32 sip
, __be32 tip
)
2439 if (!sip
|| !bond_has_this_ip(bond
, tip
)) {
2440 netdev_dbg(bond
->dev
, "bva: sip %pI4 tip %pI4 not found\n",
2445 i
= bond_get_targets_ip(bond
->params
.arp_targets
, sip
);
2447 netdev_dbg(bond
->dev
, "bva: sip %pI4 not found in targets\n",
2451 slave
->last_rx
= jiffies
;
2452 slave
->target_last_arp_rx
[i
] = jiffies
;
2455 int bond_arp_rcv(const struct sk_buff
*skb
, struct bonding
*bond
,
2456 struct slave
*slave
)
2458 struct arphdr
*arp
= (struct arphdr
*)skb
->data
;
2459 struct slave
*curr_active_slave
, *curr_arp_slave
;
2460 unsigned char *arp_ptr
;
2462 int alen
, is_arp
= skb
->protocol
== __cpu_to_be16(ETH_P_ARP
);
2464 if (!slave_do_arp_validate(bond
, slave
)) {
2465 if ((slave_do_arp_validate_only(bond
) && is_arp
) ||
2466 !slave_do_arp_validate_only(bond
))
2467 slave
->last_rx
= jiffies
;
2468 return RX_HANDLER_ANOTHER
;
2469 } else if (!is_arp
) {
2470 return RX_HANDLER_ANOTHER
;
2473 alen
= arp_hdr_len(bond
->dev
);
2475 netdev_dbg(bond
->dev
, "bond_arp_rcv: skb->dev %s\n",
2478 if (alen
> skb_headlen(skb
)) {
2479 arp
= kmalloc(alen
, GFP_ATOMIC
);
2482 if (skb_copy_bits(skb
, 0, arp
, alen
) < 0)
2486 if (arp
->ar_hln
!= bond
->dev
->addr_len
||
2487 skb
->pkt_type
== PACKET_OTHERHOST
||
2488 skb
->pkt_type
== PACKET_LOOPBACK
||
2489 arp
->ar_hrd
!= htons(ARPHRD_ETHER
) ||
2490 arp
->ar_pro
!= htons(ETH_P_IP
) ||
2494 arp_ptr
= (unsigned char *)(arp
+ 1);
2495 arp_ptr
+= bond
->dev
->addr_len
;
2496 memcpy(&sip
, arp_ptr
, 4);
2497 arp_ptr
+= 4 + bond
->dev
->addr_len
;
2498 memcpy(&tip
, arp_ptr
, 4);
2500 netdev_dbg(bond
->dev
, "bond_arp_rcv: %s/%d av %d sv %d sip %pI4 tip %pI4\n",
2501 slave
->dev
->name
, bond_slave_state(slave
),
2502 bond
->params
.arp_validate
, slave_do_arp_validate(bond
, slave
),
2505 curr_active_slave
= rcu_dereference(bond
->curr_active_slave
);
2506 curr_arp_slave
= rcu_dereference(bond
->current_arp_slave
);
2508 /* We 'trust' the received ARP enough to validate it if:
2510 * (a) the slave receiving the ARP is active (which includes the
2511 * current ARP slave, if any), or
2513 * (b) the receiving slave isn't active, but there is a currently
2514 * active slave and it received valid arp reply(s) after it became
2515 * the currently active slave, or
2517 * (c) there is an ARP slave that sent an ARP during the prior ARP
2518 * interval, and we receive an ARP reply on any slave. We accept
2519 * these because switch FDB update delays may deliver the ARP
2520 * reply to a slave other than the sender of the ARP request.
2522 * Note: for (b), backup slaves are receiving the broadcast ARP
2523 * request, not a reply. This request passes from the sending
2524 * slave through the L2 switch(es) to the receiving slave. Since
2525 * this is checking the request, sip/tip are swapped for
2528 * This is done to avoid endless looping when we can't reach the
2529 * arp_ip_target and fool ourselves with our own arp requests.
2531 if (bond_is_active_slave(slave
))
2532 bond_validate_arp(bond
, slave
, sip
, tip
);
2533 else if (curr_active_slave
&&
2534 time_after(slave_last_rx(bond
, curr_active_slave
),
2535 curr_active_slave
->last_link_up
))
2536 bond_validate_arp(bond
, slave
, tip
, sip
);
2537 else if (curr_arp_slave
&& (arp
->ar_op
== htons(ARPOP_REPLY
)) &&
2538 bond_time_in_interval(bond
,
2539 dev_trans_start(curr_arp_slave
->dev
), 1))
2540 bond_validate_arp(bond
, slave
, sip
, tip
);
2543 if (arp
!= (struct arphdr
*)skb
->data
)
2545 return RX_HANDLER_ANOTHER
;
2548 /* function to verify if we're in the arp_interval timeslice, returns true if
2549 * (last_act - arp_interval) <= jiffies <= (last_act + mod * arp_interval +
2550 * arp_interval/2) . the arp_interval/2 is needed for really fast networks.
2552 static bool bond_time_in_interval(struct bonding
*bond
, unsigned long last_act
,
2555 int delta_in_ticks
= msecs_to_jiffies(bond
->params
.arp_interval
);
2557 return time_in_range(jiffies
,
2558 last_act
- delta_in_ticks
,
2559 last_act
+ mod
* delta_in_ticks
+ delta_in_ticks
/2);
2562 /* This function is called regularly to monitor each slave's link
2563 * ensuring that traffic is being sent and received when arp monitoring
2564 * is used in load-balancing mode. if the adapter has been dormant, then an
2565 * arp is transmitted to generate traffic. see activebackup_arp_monitor for
2566 * arp monitoring in active backup mode.
2568 static void bond_loadbalance_arp_mon(struct work_struct
*work
)
2570 struct bonding
*bond
= container_of(work
, struct bonding
,
2572 struct slave
*slave
, *oldcurrent
;
2573 struct list_head
*iter
;
2574 int do_failover
= 0, slave_state_changed
= 0;
2576 if (!bond_has_slaves(bond
))
2581 oldcurrent
= rcu_dereference(bond
->curr_active_slave
);
2582 /* see if any of the previous devices are up now (i.e. they have
2583 * xmt and rcv traffic). the curr_active_slave does not come into
2584 * the picture unless it is null. also, slave->last_link_up is not
2585 * needed here because we send an arp on each slave and give a slave
2586 * as long as it needs to get the tx/rx within the delta.
2587 * TODO: what about up/down delay in arp mode? it wasn't here before
2590 bond_for_each_slave_rcu(bond
, slave
, iter
) {
2591 unsigned long trans_start
= dev_trans_start(slave
->dev
);
2593 if (slave
->link
!= BOND_LINK_UP
) {
2594 if (bond_time_in_interval(bond
, trans_start
, 1) &&
2595 bond_time_in_interval(bond
, slave
->last_rx
, 1)) {
2597 slave
->link
= BOND_LINK_UP
;
2598 slave_state_changed
= 1;
2600 /* primary_slave has no meaning in round-robin
2601 * mode. the window of a slave being up and
2602 * curr_active_slave being null after enslaving
2606 netdev_info(bond
->dev
, "link status definitely up for interface %s\n",
2610 netdev_info(bond
->dev
, "interface %s is now up\n",
2615 /* slave->link == BOND_LINK_UP */
2617 /* not all switches will respond to an arp request
2618 * when the source ip is 0, so don't take the link down
2619 * if we don't know our ip yet
2621 if (!bond_time_in_interval(bond
, trans_start
, 2) ||
2622 !bond_time_in_interval(bond
, slave
->last_rx
, 2)) {
2624 slave
->link
= BOND_LINK_DOWN
;
2625 slave_state_changed
= 1;
2627 if (slave
->link_failure_count
< UINT_MAX
)
2628 slave
->link_failure_count
++;
2630 netdev_info(bond
->dev
, "interface %s is now down\n",
2633 if (slave
== oldcurrent
)
2638 /* note: if switch is in round-robin mode, all links
2639 * must tx arp to ensure all links rx an arp - otherwise
2640 * links may oscillate or not come up at all; if switch is
2641 * in something like xor mode, there is nothing we can
2642 * do - all replies will be rx'ed on same link causing slaves
2643 * to be unstable during low/no traffic periods
2645 if (bond_slave_is_up(slave
))
2646 bond_arp_send_all(bond
, slave
);
2651 if (do_failover
|| slave_state_changed
) {
2652 if (!rtnl_trylock())
2655 if (slave_state_changed
) {
2656 bond_slave_state_change(bond
);
2657 if (BOND_MODE(bond
) == BOND_MODE_XOR
)
2658 bond_update_slave_arr(bond
, NULL
);
2662 bond_select_active_slave(bond
);
2663 unblock_netpoll_tx();
2669 if (bond
->params
.arp_interval
)
2670 queue_delayed_work(bond
->wq
, &bond
->arp_work
,
2671 msecs_to_jiffies(bond
->params
.arp_interval
));
2674 /* Called to inspect slaves for active-backup mode ARP monitor link state
2675 * changes. Sets new_link in slaves to specify what action should take
2676 * place for the slave. Returns 0 if no changes are found, >0 if changes
2677 * to link states must be committed.
2679 * Called with rcu_read_lock held.
2681 static int bond_ab_arp_inspect(struct bonding
*bond
)
2683 unsigned long trans_start
, last_rx
;
2684 struct list_head
*iter
;
2685 struct slave
*slave
;
2688 bond_for_each_slave_rcu(bond
, slave
, iter
) {
2689 slave
->new_link
= BOND_LINK_NOCHANGE
;
2690 last_rx
= slave_last_rx(bond
, slave
);
2692 if (slave
->link
!= BOND_LINK_UP
) {
2693 if (bond_time_in_interval(bond
, last_rx
, 1)) {
2694 slave
->new_link
= BOND_LINK_UP
;
2700 /* Give slaves 2*delta after being enslaved or made
2701 * active. This avoids bouncing, as the last receive
2702 * times need a full ARP monitor cycle to be updated.
2704 if (bond_time_in_interval(bond
, slave
->last_link_up
, 2))
2707 /* Backup slave is down if:
2708 * - No current_arp_slave AND
2709 * - more than 3*delta since last receive AND
2710 * - the bond has an IP address
2712 * Note: a non-null current_arp_slave indicates
2713 * the curr_active_slave went down and we are
2714 * searching for a new one; under this condition
2715 * we only take the curr_active_slave down - this
2716 * gives each slave a chance to tx/rx traffic
2717 * before being taken out
2719 if (!bond_is_active_slave(slave
) &&
2720 !rcu_access_pointer(bond
->current_arp_slave
) &&
2721 !bond_time_in_interval(bond
, last_rx
, 3)) {
2722 slave
->new_link
= BOND_LINK_DOWN
;
2726 /* Active slave is down if:
2727 * - more than 2*delta since transmitting OR
2728 * - (more than 2*delta since receive AND
2729 * the bond has an IP address)
2731 trans_start
= dev_trans_start(slave
->dev
);
2732 if (bond_is_active_slave(slave
) &&
2733 (!bond_time_in_interval(bond
, trans_start
, 2) ||
2734 !bond_time_in_interval(bond
, last_rx
, 2))) {
2735 slave
->new_link
= BOND_LINK_DOWN
;
2743 /* Called to commit link state changes noted by inspection step of
2744 * active-backup mode ARP monitor.
2746 * Called with RTNL hold.
2748 static void bond_ab_arp_commit(struct bonding
*bond
)
2750 unsigned long trans_start
;
2751 struct list_head
*iter
;
2752 struct slave
*slave
;
2754 bond_for_each_slave(bond
, slave
, iter
) {
2755 switch (slave
->new_link
) {
2756 case BOND_LINK_NOCHANGE
:
2760 trans_start
= dev_trans_start(slave
->dev
);
2761 if (rtnl_dereference(bond
->curr_active_slave
) != slave
||
2762 (!rtnl_dereference(bond
->curr_active_slave
) &&
2763 bond_time_in_interval(bond
, trans_start
, 1))) {
2764 struct slave
*current_arp_slave
;
2766 current_arp_slave
= rtnl_dereference(bond
->current_arp_slave
);
2767 bond_set_slave_link_state(slave
, BOND_LINK_UP
,
2768 BOND_SLAVE_NOTIFY_NOW
);
2769 if (current_arp_slave
) {
2770 bond_set_slave_inactive_flags(
2772 BOND_SLAVE_NOTIFY_NOW
);
2773 RCU_INIT_POINTER(bond
->current_arp_slave
, NULL
);
2776 netdev_info(bond
->dev
, "link status definitely up for interface %s\n",
2779 if (!rtnl_dereference(bond
->curr_active_slave
) ||
2780 slave
== rtnl_dereference(bond
->primary_slave
))
2787 case BOND_LINK_DOWN
:
2788 if (slave
->link_failure_count
< UINT_MAX
)
2789 slave
->link_failure_count
++;
2791 bond_set_slave_link_state(slave
, BOND_LINK_DOWN
,
2792 BOND_SLAVE_NOTIFY_NOW
);
2793 bond_set_slave_inactive_flags(slave
,
2794 BOND_SLAVE_NOTIFY_NOW
);
2796 netdev_info(bond
->dev
, "link status definitely down for interface %s, disabling it\n",
2799 if (slave
== rtnl_dereference(bond
->curr_active_slave
)) {
2800 RCU_INIT_POINTER(bond
->current_arp_slave
, NULL
);
2807 netdev_err(bond
->dev
, "impossible: new_link %d on slave %s\n",
2808 slave
->new_link
, slave
->dev
->name
);
2814 bond_select_active_slave(bond
);
2815 unblock_netpoll_tx();
2818 bond_set_carrier(bond
);
2821 /* Send ARP probes for active-backup mode ARP monitor.
2823 * Called with rcu_read_lock held.
2825 static bool bond_ab_arp_probe(struct bonding
*bond
)
2827 struct slave
*slave
, *before
= NULL
, *new_slave
= NULL
,
2828 *curr_arp_slave
= rcu_dereference(bond
->current_arp_slave
),
2829 *curr_active_slave
= rcu_dereference(bond
->curr_active_slave
);
2830 struct list_head
*iter
;
2832 bool should_notify_rtnl
= BOND_SLAVE_NOTIFY_LATER
;
2834 if (curr_arp_slave
&& curr_active_slave
)
2835 netdev_info(bond
->dev
, "PROBE: c_arp %s && cas %s BAD\n",
2836 curr_arp_slave
->dev
->name
,
2837 curr_active_slave
->dev
->name
);
2839 if (curr_active_slave
) {
2840 bond_arp_send_all(bond
, curr_active_slave
);
2841 return should_notify_rtnl
;
2844 /* if we don't have a curr_active_slave, search for the next available
2845 * backup slave from the current_arp_slave and make it the candidate
2846 * for becoming the curr_active_slave
2849 if (!curr_arp_slave
) {
2850 curr_arp_slave
= bond_first_slave_rcu(bond
);
2851 if (!curr_arp_slave
)
2852 return should_notify_rtnl
;
2855 bond_set_slave_inactive_flags(curr_arp_slave
, BOND_SLAVE_NOTIFY_LATER
);
2857 bond_for_each_slave_rcu(bond
, slave
, iter
) {
2858 if (!found
&& !before
&& bond_slave_is_up(slave
))
2861 if (found
&& !new_slave
&& bond_slave_is_up(slave
))
2863 /* if the link state is up at this point, we
2864 * mark it down - this can happen if we have
2865 * simultaneous link failures and
2866 * reselect_active_interface doesn't make this
2867 * one the current slave so it is still marked
2868 * up when it is actually down
2870 if (!bond_slave_is_up(slave
) && slave
->link
== BOND_LINK_UP
) {
2871 bond_set_slave_link_state(slave
, BOND_LINK_DOWN
,
2872 BOND_SLAVE_NOTIFY_LATER
);
2873 if (slave
->link_failure_count
< UINT_MAX
)
2874 slave
->link_failure_count
++;
2876 bond_set_slave_inactive_flags(slave
,
2877 BOND_SLAVE_NOTIFY_LATER
);
2879 netdev_info(bond
->dev
, "backup interface %s is now down\n",
2882 if (slave
== curr_arp_slave
)
2886 if (!new_slave
&& before
)
2892 bond_set_slave_link_state(new_slave
, BOND_LINK_BACK
,
2893 BOND_SLAVE_NOTIFY_LATER
);
2894 bond_set_slave_active_flags(new_slave
, BOND_SLAVE_NOTIFY_LATER
);
2895 bond_arp_send_all(bond
, new_slave
);
2896 new_slave
->last_link_up
= jiffies
;
2897 rcu_assign_pointer(bond
->current_arp_slave
, new_slave
);
2900 bond_for_each_slave_rcu(bond
, slave
, iter
) {
2901 if (slave
->should_notify
|| slave
->should_notify_link
) {
2902 should_notify_rtnl
= BOND_SLAVE_NOTIFY_NOW
;
2906 return should_notify_rtnl
;
2909 static void bond_activebackup_arp_mon(struct work_struct
*work
)
2911 struct bonding
*bond
= container_of(work
, struct bonding
,
2913 bool should_notify_peers
= false;
2914 bool should_notify_rtnl
= false;
2917 delta_in_ticks
= msecs_to_jiffies(bond
->params
.arp_interval
);
2919 if (!bond_has_slaves(bond
))
2924 should_notify_peers
= bond_should_notify_peers(bond
);
2926 if (bond_ab_arp_inspect(bond
)) {
2929 /* Race avoidance with bond_close flush of workqueue */
2930 if (!rtnl_trylock()) {
2932 should_notify_peers
= false;
2936 bond_ab_arp_commit(bond
);
2942 should_notify_rtnl
= bond_ab_arp_probe(bond
);
2946 if (bond
->params
.arp_interval
)
2947 queue_delayed_work(bond
->wq
, &bond
->arp_work
, delta_in_ticks
);
2949 if (should_notify_peers
|| should_notify_rtnl
) {
2950 if (!rtnl_trylock())
2953 if (should_notify_peers
)
2954 call_netdevice_notifiers(NETDEV_NOTIFY_PEERS
,
2956 if (should_notify_rtnl
) {
2957 bond_slave_state_notify(bond
);
2958 bond_slave_link_notify(bond
);
2965 /*-------------------------- netdev event handling --------------------------*/
2967 /* Change device name */
2968 static int bond_event_changename(struct bonding
*bond
)
2970 bond_remove_proc_entry(bond
);
2971 bond_create_proc_entry(bond
);
2973 bond_debug_reregister(bond
);
2978 static int bond_master_netdev_event(unsigned long event
,
2979 struct net_device
*bond_dev
)
2981 struct bonding
*event_bond
= netdev_priv(bond_dev
);
2984 case NETDEV_CHANGENAME
:
2985 return bond_event_changename(event_bond
);
2986 case NETDEV_UNREGISTER
:
2987 bond_remove_proc_entry(event_bond
);
2989 case NETDEV_REGISTER
:
2990 bond_create_proc_entry(event_bond
);
2992 case NETDEV_NOTIFY_PEERS
:
2993 if (event_bond
->send_peer_notif
)
2994 event_bond
->send_peer_notif
--;
3003 static int bond_slave_netdev_event(unsigned long event
,
3004 struct net_device
*slave_dev
)
3006 struct slave
*slave
= bond_slave_get_rtnl(slave_dev
), *primary
;
3007 struct bonding
*bond
;
3008 struct net_device
*bond_dev
;
3010 /* A netdev event can be generated while enslaving a device
3011 * before netdev_rx_handler_register is called in which case
3012 * slave will be NULL
3016 bond_dev
= slave
->bond
->dev
;
3018 primary
= rtnl_dereference(bond
->primary_slave
);
3021 case NETDEV_UNREGISTER
:
3022 if (bond_dev
->type
!= ARPHRD_ETHER
)
3023 bond_release_and_destroy(bond_dev
, slave_dev
);
3025 bond_release(bond_dev
, slave_dev
);
3029 bond_update_speed_duplex(slave
);
3030 if (BOND_MODE(bond
) == BOND_MODE_8023AD
)
3031 bond_3ad_adapter_speed_duplex_changed(slave
);
3034 /* Refresh slave-array if applicable!
3035 * If the setup does not use miimon or arpmon (mode-specific!),
3036 * then these events will not cause the slave-array to be
3037 * refreshed. This will cause xmit to use a slave that is not
3038 * usable. Avoid such situation by refeshing the array at these
3039 * events. If these (miimon/arpmon) parameters are configured
3040 * then array gets refreshed twice and that should be fine!
3042 if (bond_mode_uses_xmit_hash(bond
))
3043 bond_update_slave_arr(bond
, NULL
);
3045 case NETDEV_CHANGEMTU
:
3046 /* TODO: Should slaves be allowed to
3047 * independently alter their MTU? For
3048 * an active-backup bond, slaves need
3049 * not be the same type of device, so
3050 * MTUs may vary. For other modes,
3051 * slaves arguably should have the
3052 * same MTUs. To do this, we'd need to
3053 * take over the slave's change_mtu
3054 * function for the duration of their
3058 case NETDEV_CHANGENAME
:
3059 /* we don't care if we don't have primary set */
3060 if (!bond_uses_primary(bond
) ||
3061 !bond
->params
.primary
[0])
3064 if (slave
== primary
) {
3065 /* slave's name changed - he's no longer primary */
3066 RCU_INIT_POINTER(bond
->primary_slave
, NULL
);
3067 } else if (!strcmp(slave_dev
->name
, bond
->params
.primary
)) {
3068 /* we have a new primary slave */
3069 rcu_assign_pointer(bond
->primary_slave
, slave
);
3070 } else { /* we didn't change primary - exit */
3074 netdev_info(bond
->dev
, "Primary slave changed to %s, reselecting active slave\n",
3075 primary
? slave_dev
->name
: "none");
3078 bond_select_active_slave(bond
);
3079 unblock_netpoll_tx();
3081 case NETDEV_FEAT_CHANGE
:
3082 bond_compute_features(bond
);
3084 case NETDEV_RESEND_IGMP
:
3085 /* Propagate to master device */
3086 call_netdevice_notifiers(event
, slave
->bond
->dev
);
3095 /* bond_netdev_event: handle netdev notifier chain events.
3097 * This function receives events for the netdev chain. The caller (an
3098 * ioctl handler calling blocking_notifier_call_chain) holds the necessary
3099 * locks for us to safely manipulate the slave devices (RTNL lock,
3102 static int bond_netdev_event(struct notifier_block
*this,
3103 unsigned long event
, void *ptr
)
3105 struct net_device
*event_dev
= netdev_notifier_info_to_dev(ptr
);
3107 netdev_dbg(event_dev
, "event: %lx\n", event
);
3109 if (!(event_dev
->priv_flags
& IFF_BONDING
))
3112 if (event_dev
->flags
& IFF_MASTER
) {
3113 netdev_dbg(event_dev
, "IFF_MASTER\n");
3114 return bond_master_netdev_event(event
, event_dev
);
3117 if (event_dev
->flags
& IFF_SLAVE
) {
3118 netdev_dbg(event_dev
, "IFF_SLAVE\n");
3119 return bond_slave_netdev_event(event
, event_dev
);
3125 static struct notifier_block bond_netdev_notifier
= {
3126 .notifier_call
= bond_netdev_event
,
3129 /*---------------------------- Hashing Policies -----------------------------*/
3131 /* L2 hash helper */
3132 static inline u32
bond_eth_hash(struct sk_buff
*skb
)
3134 struct ethhdr
*ep
, hdr_tmp
;
3136 ep
= skb_header_pointer(skb
, 0, sizeof(hdr_tmp
), &hdr_tmp
);
3138 return ep
->h_dest
[5] ^ ep
->h_source
[5] ^ ep
->h_proto
;
3142 /* Extract the appropriate headers based on bond's xmit policy */
3143 static bool bond_flow_dissect(struct bonding
*bond
, struct sk_buff
*skb
,
3144 struct flow_keys
*fk
)
3146 const struct ipv6hdr
*iph6
;
3147 const struct iphdr
*iph
;
3148 int noff
, proto
= -1;
3150 if (bond
->params
.xmit_policy
> BOND_XMIT_POLICY_LAYER23
)
3151 return skb_flow_dissect_flow_keys(skb
, fk
, 0);
3153 fk
->ports
.ports
= 0;
3154 noff
= skb_network_offset(skb
);
3155 if (skb
->protocol
== htons(ETH_P_IP
)) {
3156 if (unlikely(!pskb_may_pull(skb
, noff
+ sizeof(*iph
))))
3159 iph_to_flow_copy_v4addrs(fk
, iph
);
3160 noff
+= iph
->ihl
<< 2;
3161 if (!ip_is_fragment(iph
))
3162 proto
= iph
->protocol
;
3163 } else if (skb
->protocol
== htons(ETH_P_IPV6
)) {
3164 if (unlikely(!pskb_may_pull(skb
, noff
+ sizeof(*iph6
))))
3166 iph6
= ipv6_hdr(skb
);
3167 iph_to_flow_copy_v6addrs(fk
, iph6
);
3168 noff
+= sizeof(*iph6
);
3169 proto
= iph6
->nexthdr
;
3173 if (bond
->params
.xmit_policy
== BOND_XMIT_POLICY_LAYER34
&& proto
>= 0)
3174 fk
->ports
.ports
= skb_flow_get_ports(skb
, noff
, proto
);
3180 * bond_xmit_hash - generate a hash value based on the xmit policy
3181 * @bond: bonding device
3182 * @skb: buffer to use for headers
3184 * This function will extract the necessary headers from the skb buffer and use
3185 * them to generate a hash based on the xmit_policy set in the bonding device
3187 u32
bond_xmit_hash(struct bonding
*bond
, struct sk_buff
*skb
)
3189 struct flow_keys flow
;
3192 if (bond
->params
.xmit_policy
== BOND_XMIT_POLICY_ENCAP34
&&
3196 if (bond
->params
.xmit_policy
== BOND_XMIT_POLICY_LAYER2
||
3197 !bond_flow_dissect(bond
, skb
, &flow
))
3198 return bond_eth_hash(skb
);
3200 if (bond
->params
.xmit_policy
== BOND_XMIT_POLICY_LAYER23
||
3201 bond
->params
.xmit_policy
== BOND_XMIT_POLICY_ENCAP23
)
3202 hash
= bond_eth_hash(skb
);
3204 hash
= (__force u32
)flow
.ports
.ports
;
3205 hash
^= (__force u32
)flow_get_u32_dst(&flow
) ^
3206 (__force u32
)flow_get_u32_src(&flow
);
3207 hash
^= (hash
>> 16);
3208 hash
^= (hash
>> 8);
3213 /*-------------------------- Device entry points ----------------------------*/
3215 static void bond_work_init_all(struct bonding
*bond
)
3217 INIT_DELAYED_WORK(&bond
->mcast_work
,
3218 bond_resend_igmp_join_requests_delayed
);
3219 INIT_DELAYED_WORK(&bond
->alb_work
, bond_alb_monitor
);
3220 INIT_DELAYED_WORK(&bond
->mii_work
, bond_mii_monitor
);
3221 if (BOND_MODE(bond
) == BOND_MODE_ACTIVEBACKUP
)
3222 INIT_DELAYED_WORK(&bond
->arp_work
, bond_activebackup_arp_mon
);
3224 INIT_DELAYED_WORK(&bond
->arp_work
, bond_loadbalance_arp_mon
);
3225 INIT_DELAYED_WORK(&bond
->ad_work
, bond_3ad_state_machine_handler
);
3226 INIT_DELAYED_WORK(&bond
->slave_arr_work
, bond_slave_arr_handler
);
3229 static void bond_work_cancel_all(struct bonding
*bond
)
3231 cancel_delayed_work_sync(&bond
->mii_work
);
3232 cancel_delayed_work_sync(&bond
->arp_work
);
3233 cancel_delayed_work_sync(&bond
->alb_work
);
3234 cancel_delayed_work_sync(&bond
->ad_work
);
3235 cancel_delayed_work_sync(&bond
->mcast_work
);
3236 cancel_delayed_work_sync(&bond
->slave_arr_work
);
3239 static int bond_open(struct net_device
*bond_dev
)
3241 struct bonding
*bond
= netdev_priv(bond_dev
);
3242 struct list_head
*iter
;
3243 struct slave
*slave
;
3245 /* reset slave->backup and slave->inactive */
3246 if (bond_has_slaves(bond
)) {
3247 bond_for_each_slave(bond
, slave
, iter
) {
3248 if (bond_uses_primary(bond
) &&
3249 slave
!= rcu_access_pointer(bond
->curr_active_slave
)) {
3250 bond_set_slave_inactive_flags(slave
,
3251 BOND_SLAVE_NOTIFY_NOW
);
3252 } else if (BOND_MODE(bond
) != BOND_MODE_8023AD
) {
3253 bond_set_slave_active_flags(slave
,
3254 BOND_SLAVE_NOTIFY_NOW
);
3259 bond_work_init_all(bond
);
3261 if (bond_is_lb(bond
)) {
3262 /* bond_alb_initialize must be called before the timer
3265 if (bond_alb_initialize(bond
, (BOND_MODE(bond
) == BOND_MODE_ALB
)))
3267 if (bond
->params
.tlb_dynamic_lb
)
3268 queue_delayed_work(bond
->wq
, &bond
->alb_work
, 0);
3271 if (bond
->params
.miimon
) /* link check interval, in milliseconds. */
3272 queue_delayed_work(bond
->wq
, &bond
->mii_work
, 0);
3274 if (bond
->params
.arp_interval
) { /* arp interval, in milliseconds. */
3275 queue_delayed_work(bond
->wq
, &bond
->arp_work
, 0);
3276 bond
->recv_probe
= bond_arp_rcv
;
3279 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
3280 queue_delayed_work(bond
->wq
, &bond
->ad_work
, 0);
3281 /* register to receive LACPDUs */
3282 bond
->recv_probe
= bond_3ad_lacpdu_recv
;
3283 bond_3ad_initiate_agg_selection(bond
, 1);
3286 if (bond_mode_uses_xmit_hash(bond
))
3287 bond_update_slave_arr(bond
, NULL
);
3292 static int bond_close(struct net_device
*bond_dev
)
3294 struct bonding
*bond
= netdev_priv(bond_dev
);
3296 bond_work_cancel_all(bond
);
3297 bond
->send_peer_notif
= 0;
3298 if (bond_is_lb(bond
))
3299 bond_alb_deinitialize(bond
);
3300 bond
->recv_probe
= NULL
;
3305 /* fold stats, assuming all rtnl_link_stats64 fields are u64, but
3306 * that some drivers can provide 32bit values only.
3308 static void bond_fold_stats(struct rtnl_link_stats64
*_res
,
3309 const struct rtnl_link_stats64
*_new
,
3310 const struct rtnl_link_stats64
*_old
)
3312 const u64
*new = (const u64
*)_new
;
3313 const u64
*old
= (const u64
*)_old
;
3314 u64
*res
= (u64
*)_res
;
3317 for (i
= 0; i
< sizeof(*_res
) / sizeof(u64
); i
++) {
3321 /* detects if this particular field is 32bit only */
3322 if (((nv
| ov
) >> 32) == 0)
3323 res
[i
] += (u32
)nv
- (u32
)ov
;
3329 static struct rtnl_link_stats64
*bond_get_stats(struct net_device
*bond_dev
,
3330 struct rtnl_link_stats64
*stats
)
3332 struct bonding
*bond
= netdev_priv(bond_dev
);
3333 struct rtnl_link_stats64 temp
;
3334 struct list_head
*iter
;
3335 struct slave
*slave
;
3337 spin_lock(&bond
->stats_lock
);
3338 memcpy(stats
, &bond
->bond_stats
, sizeof(*stats
));
3341 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3342 const struct rtnl_link_stats64
*new =
3343 dev_get_stats(slave
->dev
, &temp
);
3345 bond_fold_stats(stats
, new, &slave
->slave_stats
);
3347 /* save off the slave stats for the next run */
3348 memcpy(&slave
->slave_stats
, new, sizeof(*new));
3352 memcpy(&bond
->bond_stats
, stats
, sizeof(*stats
));
3353 spin_unlock(&bond
->stats_lock
);
3358 static int bond_do_ioctl(struct net_device
*bond_dev
, struct ifreq
*ifr
, int cmd
)
3360 struct bonding
*bond
= netdev_priv(bond_dev
);
3361 struct net_device
*slave_dev
= NULL
;
3362 struct ifbond k_binfo
;
3363 struct ifbond __user
*u_binfo
= NULL
;
3364 struct ifslave k_sinfo
;
3365 struct ifslave __user
*u_sinfo
= NULL
;
3366 struct mii_ioctl_data
*mii
= NULL
;
3367 struct bond_opt_value newval
;
3371 netdev_dbg(bond_dev
, "bond_ioctl: cmd=%d\n", cmd
);
3382 /* We do this again just in case we were called by SIOCGMIIREG
3383 * instead of SIOCGMIIPHY.
3389 if (mii
->reg_num
== 1) {
3391 if (netif_carrier_ok(bond
->dev
))
3392 mii
->val_out
= BMSR_LSTATUS
;
3396 case BOND_INFO_QUERY_OLD
:
3397 case SIOCBONDINFOQUERY
:
3398 u_binfo
= (struct ifbond __user
*)ifr
->ifr_data
;
3400 if (copy_from_user(&k_binfo
, u_binfo
, sizeof(ifbond
)))
3403 res
= bond_info_query(bond_dev
, &k_binfo
);
3405 copy_to_user(u_binfo
, &k_binfo
, sizeof(ifbond
)))
3409 case BOND_SLAVE_INFO_QUERY_OLD
:
3410 case SIOCBONDSLAVEINFOQUERY
:
3411 u_sinfo
= (struct ifslave __user
*)ifr
->ifr_data
;
3413 if (copy_from_user(&k_sinfo
, u_sinfo
, sizeof(ifslave
)))
3416 res
= bond_slave_info_query(bond_dev
, &k_sinfo
);
3418 copy_to_user(u_sinfo
, &k_sinfo
, sizeof(ifslave
)))
3426 net
= dev_net(bond_dev
);
3428 if (!ns_capable(net
->user_ns
, CAP_NET_ADMIN
))
3431 slave_dev
= __dev_get_by_name(net
, ifr
->ifr_slave
);
3433 netdev_dbg(bond_dev
, "slave_dev=%p:\n", slave_dev
);
3438 netdev_dbg(bond_dev
, "slave_dev->name=%s:\n", slave_dev
->name
);
3440 case BOND_ENSLAVE_OLD
:
3441 case SIOCBONDENSLAVE
:
3442 res
= bond_enslave(bond_dev
, slave_dev
);
3444 case BOND_RELEASE_OLD
:
3445 case SIOCBONDRELEASE
:
3446 res
= bond_release(bond_dev
, slave_dev
);
3448 case BOND_SETHWADDR_OLD
:
3449 case SIOCBONDSETHWADDR
:
3450 bond_set_dev_addr(bond_dev
, slave_dev
);
3453 case BOND_CHANGE_ACTIVE_OLD
:
3454 case SIOCBONDCHANGEACTIVE
:
3455 bond_opt_initstr(&newval
, slave_dev
->name
);
3456 res
= __bond_opt_set(bond
, BOND_OPT_ACTIVE_SLAVE
, &newval
);
3465 static void bond_change_rx_flags(struct net_device
*bond_dev
, int change
)
3467 struct bonding
*bond
= netdev_priv(bond_dev
);
3469 if (change
& IFF_PROMISC
)
3470 bond_set_promiscuity(bond
,
3471 bond_dev
->flags
& IFF_PROMISC
? 1 : -1);
3473 if (change
& IFF_ALLMULTI
)
3474 bond_set_allmulti(bond
,
3475 bond_dev
->flags
& IFF_ALLMULTI
? 1 : -1);
3478 static void bond_set_rx_mode(struct net_device
*bond_dev
)
3480 struct bonding
*bond
= netdev_priv(bond_dev
);
3481 struct list_head
*iter
;
3482 struct slave
*slave
;
3485 if (bond_uses_primary(bond
)) {
3486 slave
= rcu_dereference(bond
->curr_active_slave
);
3488 dev_uc_sync(slave
->dev
, bond_dev
);
3489 dev_mc_sync(slave
->dev
, bond_dev
);
3492 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3493 dev_uc_sync_multiple(slave
->dev
, bond_dev
);
3494 dev_mc_sync_multiple(slave
->dev
, bond_dev
);
3500 static int bond_neigh_init(struct neighbour
*n
)
3502 struct bonding
*bond
= netdev_priv(n
->dev
);
3503 const struct net_device_ops
*slave_ops
;
3504 struct neigh_parms parms
;
3505 struct slave
*slave
;
3508 slave
= bond_first_slave(bond
);
3511 slave_ops
= slave
->dev
->netdev_ops
;
3512 if (!slave_ops
->ndo_neigh_setup
)
3515 parms
.neigh_setup
= NULL
;
3516 parms
.neigh_cleanup
= NULL
;
3517 ret
= slave_ops
->ndo_neigh_setup(slave
->dev
, &parms
);
3521 /* Assign slave's neigh_cleanup to neighbour in case cleanup is called
3522 * after the last slave has been detached. Assumes that all slaves
3523 * utilize the same neigh_cleanup (true at this writing as only user
3526 n
->parms
->neigh_cleanup
= parms
.neigh_cleanup
;
3528 if (!parms
.neigh_setup
)
3531 return parms
.neigh_setup(n
);
3534 /* The bonding ndo_neigh_setup is called at init time beofre any
3535 * slave exists. So we must declare proxy setup function which will
3536 * be used at run time to resolve the actual slave neigh param setup.
3538 * It's also called by master devices (such as vlans) to setup their
3539 * underlying devices. In that case - do nothing, we're already set up from
3542 static int bond_neigh_setup(struct net_device
*dev
,
3543 struct neigh_parms
*parms
)
3545 /* modify only our neigh_parms */
3546 if (parms
->dev
== dev
)
3547 parms
->neigh_setup
= bond_neigh_init
;
3552 /* Change the MTU of all of a master's slaves to match the master */
3553 static int bond_change_mtu(struct net_device
*bond_dev
, int new_mtu
)
3555 struct bonding
*bond
= netdev_priv(bond_dev
);
3556 struct slave
*slave
, *rollback_slave
;
3557 struct list_head
*iter
;
3560 netdev_dbg(bond_dev
, "bond=%p, new_mtu=%d\n", bond
, new_mtu
);
3562 bond_for_each_slave(bond
, slave
, iter
) {
3563 netdev_dbg(bond_dev
, "s %p c_m %p\n",
3564 slave
, slave
->dev
->netdev_ops
->ndo_change_mtu
);
3566 res
= dev_set_mtu(slave
->dev
, new_mtu
);
3569 /* If we failed to set the slave's mtu to the new value
3570 * we must abort the operation even in ACTIVE_BACKUP
3571 * mode, because if we allow the backup slaves to have
3572 * different mtu values than the active slave we'll
3573 * need to change their mtu when doing a failover. That
3574 * means changing their mtu from timer context, which
3575 * is probably not a good idea.
3577 netdev_dbg(bond_dev
, "err %d %s\n", res
,
3583 bond_dev
->mtu
= new_mtu
;
3588 /* unwind from head to the slave that failed */
3589 bond_for_each_slave(bond
, rollback_slave
, iter
) {
3592 if (rollback_slave
== slave
)
3595 tmp_res
= dev_set_mtu(rollback_slave
->dev
, bond_dev
->mtu
);
3597 netdev_dbg(bond_dev
, "unwind err %d dev %s\n",
3598 tmp_res
, rollback_slave
->dev
->name
);
3605 /* Change HW address
3607 * Note that many devices must be down to change the HW address, and
3608 * downing the master releases all slaves. We can make bonds full of
3609 * bonding devices to test this, however.
3611 static int bond_set_mac_address(struct net_device
*bond_dev
, void *addr
)
3613 struct bonding
*bond
= netdev_priv(bond_dev
);
3614 struct slave
*slave
, *rollback_slave
;
3615 struct sockaddr
*sa
= addr
, tmp_sa
;
3616 struct list_head
*iter
;
3619 if (BOND_MODE(bond
) == BOND_MODE_ALB
)
3620 return bond_alb_set_mac_address(bond_dev
, addr
);
3623 netdev_dbg(bond_dev
, "bond=%p\n", bond
);
3625 /* If fail_over_mac is enabled, do nothing and return success.
3626 * Returning an error causes ifenslave to fail.
3628 if (bond
->params
.fail_over_mac
&&
3629 BOND_MODE(bond
) == BOND_MODE_ACTIVEBACKUP
)
3632 if (!is_valid_ether_addr(sa
->sa_data
))
3633 return -EADDRNOTAVAIL
;
3635 bond_for_each_slave(bond
, slave
, iter
) {
3636 netdev_dbg(bond_dev
, "slave %p %s\n", slave
, slave
->dev
->name
);
3637 res
= dev_set_mac_address(slave
->dev
, addr
);
3639 /* TODO: consider downing the slave
3641 * User should expect communications
3642 * breakage anyway until ARP finish
3645 netdev_dbg(bond_dev
, "err %d %s\n", res
, slave
->dev
->name
);
3651 memcpy(bond_dev
->dev_addr
, sa
->sa_data
, bond_dev
->addr_len
);
3655 memcpy(tmp_sa
.sa_data
, bond_dev
->dev_addr
, bond_dev
->addr_len
);
3656 tmp_sa
.sa_family
= bond_dev
->type
;
3658 /* unwind from head to the slave that failed */
3659 bond_for_each_slave(bond
, rollback_slave
, iter
) {
3662 if (rollback_slave
== slave
)
3665 tmp_res
= dev_set_mac_address(rollback_slave
->dev
, &tmp_sa
);
3667 netdev_dbg(bond_dev
, "unwind err %d dev %s\n",
3668 tmp_res
, rollback_slave
->dev
->name
);
3676 * bond_xmit_slave_id - transmit skb through slave with slave_id
3677 * @bond: bonding device that is transmitting
3678 * @skb: buffer to transmit
3679 * @slave_id: slave id up to slave_cnt-1 through which to transmit
3681 * This function tries to transmit through slave with slave_id but in case
3682 * it fails, it tries to find the first available slave for transmission.
3683 * The skb is consumed in all cases, thus the function is void.
3685 static void bond_xmit_slave_id(struct bonding
*bond
, struct sk_buff
*skb
, int slave_id
)
3687 struct list_head
*iter
;
3688 struct slave
*slave
;
3691 /* Here we start from the slave with slave_id */
3692 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3694 if (bond_slave_can_tx(slave
)) {
3695 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
3701 /* Here we start from the first slave up to slave_id */
3703 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3706 if (bond_slave_can_tx(slave
)) {
3707 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
3711 /* no slave that can tx has been found */
3712 bond_tx_drop(bond
->dev
, skb
);
3716 * bond_rr_gen_slave_id - generate slave id based on packets_per_slave
3717 * @bond: bonding device to use
3719 * Based on the value of the bonding device's packets_per_slave parameter
3720 * this function generates a slave id, which is usually used as the next
3721 * slave to transmit through.
3723 static u32
bond_rr_gen_slave_id(struct bonding
*bond
)
3726 struct reciprocal_value reciprocal_packets_per_slave
;
3727 int packets_per_slave
= bond
->params
.packets_per_slave
;
3729 switch (packets_per_slave
) {
3731 slave_id
= prandom_u32();
3734 slave_id
= bond
->rr_tx_counter
;
3737 reciprocal_packets_per_slave
=
3738 bond
->params
.reciprocal_packets_per_slave
;
3739 slave_id
= reciprocal_divide(bond
->rr_tx_counter
,
3740 reciprocal_packets_per_slave
);
3743 bond
->rr_tx_counter
++;
3748 static int bond_xmit_roundrobin(struct sk_buff
*skb
, struct net_device
*bond_dev
)
3750 struct bonding
*bond
= netdev_priv(bond_dev
);
3751 struct iphdr
*iph
= ip_hdr(skb
);
3752 struct slave
*slave
;
3755 /* Start with the curr_active_slave that joined the bond as the
3756 * default for sending IGMP traffic. For failover purposes one
3757 * needs to maintain some consistency for the interface that will
3758 * send the join/membership reports. The curr_active_slave found
3759 * will send all of this type of traffic.
3761 if (iph
->protocol
== IPPROTO_IGMP
&& skb
->protocol
== htons(ETH_P_IP
)) {
3762 slave
= rcu_dereference(bond
->curr_active_slave
);
3764 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
3766 bond_xmit_slave_id(bond
, skb
, 0);
3768 int slave_cnt
= ACCESS_ONCE(bond
->slave_cnt
);
3770 if (likely(slave_cnt
)) {
3771 slave_id
= bond_rr_gen_slave_id(bond
);
3772 bond_xmit_slave_id(bond
, skb
, slave_id
% slave_cnt
);
3774 bond_tx_drop(bond_dev
, skb
);
3778 return NETDEV_TX_OK
;
3781 /* In active-backup mode, we know that bond->curr_active_slave is always valid if
3782 * the bond has a usable interface.
3784 static int bond_xmit_activebackup(struct sk_buff
*skb
, struct net_device
*bond_dev
)
3786 struct bonding
*bond
= netdev_priv(bond_dev
);
3787 struct slave
*slave
;
3789 slave
= rcu_dereference(bond
->curr_active_slave
);
3791 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
3793 bond_tx_drop(bond_dev
, skb
);
3795 return NETDEV_TX_OK
;
3798 /* Use this to update slave_array when (a) it's not appropriate to update
3799 * slave_array right away (note that update_slave_array() may sleep)
3800 * and / or (b) RTNL is not held.
3802 void bond_slave_arr_work_rearm(struct bonding
*bond
, unsigned long delay
)
3804 queue_delayed_work(bond
->wq
, &bond
->slave_arr_work
, delay
);
3807 /* Slave array work handler. Holds only RTNL */
3808 static void bond_slave_arr_handler(struct work_struct
*work
)
3810 struct bonding
*bond
= container_of(work
, struct bonding
,
3811 slave_arr_work
.work
);
3814 if (!rtnl_trylock())
3817 ret
= bond_update_slave_arr(bond
, NULL
);
3820 pr_warn_ratelimited("Failed to update slave array from WT\n");
3826 bond_slave_arr_work_rearm(bond
, 1);
3829 /* Build the usable slaves array in control path for modes that use xmit-hash
3830 * to determine the slave interface -
3831 * (a) BOND_MODE_8023AD
3833 * (c) BOND_MODE_TLB && tlb_dynamic_lb == 0
3835 * The caller is expected to hold RTNL only and NO other lock!
3837 int bond_update_slave_arr(struct bonding
*bond
, struct slave
*skipslave
)
3839 struct slave
*slave
;
3840 struct list_head
*iter
;
3841 struct bond_up_slave
*new_arr
, *old_arr
;
3845 #ifdef CONFIG_LOCKDEP
3846 WARN_ON(lockdep_is_held(&bond
->mode_lock
));
3849 new_arr
= kzalloc(offsetof(struct bond_up_slave
, arr
[bond
->slave_cnt
]),
3853 pr_err("Failed to build slave-array.\n");
3856 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
3857 struct ad_info ad_info
;
3859 if (bond_3ad_get_active_agg_info(bond
, &ad_info
)) {
3860 pr_debug("bond_3ad_get_active_agg_info failed\n");
3861 kfree_rcu(new_arr
, rcu
);
3862 /* No active aggragator means it's not safe to use
3863 * the previous array.
3865 old_arr
= rtnl_dereference(bond
->slave_arr
);
3867 RCU_INIT_POINTER(bond
->slave_arr
, NULL
);
3868 kfree_rcu(old_arr
, rcu
);
3872 agg_id
= ad_info
.aggregator_id
;
3874 bond_for_each_slave(bond
, slave
, iter
) {
3875 if (BOND_MODE(bond
) == BOND_MODE_8023AD
) {
3876 struct aggregator
*agg
;
3878 agg
= SLAVE_AD_INFO(slave
)->port
.aggregator
;
3879 if (!agg
|| agg
->aggregator_identifier
!= agg_id
)
3882 if (!bond_slave_can_tx(slave
))
3884 if (skipslave
== slave
)
3886 new_arr
->arr
[new_arr
->count
++] = slave
;
3889 old_arr
= rtnl_dereference(bond
->slave_arr
);
3890 rcu_assign_pointer(bond
->slave_arr
, new_arr
);
3892 kfree_rcu(old_arr
, rcu
);
3894 if (ret
!= 0 && skipslave
) {
3897 /* Rare situation where caller has asked to skip a specific
3898 * slave but allocation failed (most likely!). BTW this is
3899 * only possible when the call is initiated from
3900 * __bond_release_one(). In this situation; overwrite the
3901 * skipslave entry in the array with the last entry from the
3902 * array to avoid a situation where the xmit path may choose
3903 * this to-be-skipped slave to send a packet out.
3905 old_arr
= rtnl_dereference(bond
->slave_arr
);
3906 for (idx
= 0; idx
< old_arr
->count
; idx
++) {
3907 if (skipslave
== old_arr
->arr
[idx
]) {
3909 old_arr
->arr
[old_arr
->count
-1];
3918 /* Use this Xmit function for 3AD as well as XOR modes. The current
3919 * usable slave array is formed in the control path. The xmit function
3920 * just calculates hash and sends the packet out.
3922 static int bond_3ad_xor_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
3924 struct bonding
*bond
= netdev_priv(dev
);
3925 struct slave
*slave
;
3926 struct bond_up_slave
*slaves
;
3929 slaves
= rcu_dereference(bond
->slave_arr
);
3930 count
= slaves
? ACCESS_ONCE(slaves
->count
) : 0;
3931 if (likely(count
)) {
3932 slave
= slaves
->arr
[bond_xmit_hash(bond
, skb
) % count
];
3933 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
3935 bond_tx_drop(dev
, skb
);
3938 return NETDEV_TX_OK
;
3941 /* in broadcast mode, we send everything to all usable interfaces. */
3942 static int bond_xmit_broadcast(struct sk_buff
*skb
, struct net_device
*bond_dev
)
3944 struct bonding
*bond
= netdev_priv(bond_dev
);
3945 struct slave
*slave
= NULL
;
3946 struct list_head
*iter
;
3948 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3949 if (bond_is_last_slave(bond
, slave
))
3951 if (bond_slave_is_up(slave
) && slave
->link
== BOND_LINK_UP
) {
3952 struct sk_buff
*skb2
= skb_clone(skb
, GFP_ATOMIC
);
3955 net_err_ratelimited("%s: Error: %s: skb_clone() failed\n",
3956 bond_dev
->name
, __func__
);
3959 bond_dev_queue_xmit(bond
, skb2
, slave
->dev
);
3962 if (slave
&& bond_slave_is_up(slave
) && slave
->link
== BOND_LINK_UP
)
3963 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
3965 bond_tx_drop(bond_dev
, skb
);
3967 return NETDEV_TX_OK
;
3970 /*------------------------- Device initialization ---------------------------*/
3972 /* Lookup the slave that corresponds to a qid */
3973 static inline int bond_slave_override(struct bonding
*bond
,
3974 struct sk_buff
*skb
)
3976 struct slave
*slave
= NULL
;
3977 struct list_head
*iter
;
3979 if (!skb
->queue_mapping
)
3982 /* Find out if any slaves have the same mapping as this skb. */
3983 bond_for_each_slave_rcu(bond
, slave
, iter
) {
3984 if (slave
->queue_id
== skb
->queue_mapping
) {
3985 if (bond_slave_is_up(slave
) &&
3986 slave
->link
== BOND_LINK_UP
) {
3987 bond_dev_queue_xmit(bond
, skb
, slave
->dev
);
3990 /* If the slave isn't UP, use default transmit policy. */
3999 static u16
bond_select_queue(struct net_device
*dev
, struct sk_buff
*skb
,
4000 void *accel_priv
, select_queue_fallback_t fallback
)
4002 /* This helper function exists to help dev_pick_tx get the correct
4003 * destination queue. Using a helper function skips a call to
4004 * skb_tx_hash and will put the skbs in the queue we expect on their
4005 * way down to the bonding driver.
4007 u16 txq
= skb_rx_queue_recorded(skb
) ? skb_get_rx_queue(skb
) : 0;
4009 /* Save the original txq to restore before passing to the driver */
4010 qdisc_skb_cb(skb
)->slave_dev_queue_mapping
= skb
->queue_mapping
;
4012 if (unlikely(txq
>= dev
->real_num_tx_queues
)) {
4014 txq
-= dev
->real_num_tx_queues
;
4015 } while (txq
>= dev
->real_num_tx_queues
);
4020 static netdev_tx_t
__bond_start_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
4022 struct bonding
*bond
= netdev_priv(dev
);
4024 if (bond_should_override_tx_queue(bond
) &&
4025 !bond_slave_override(bond
, skb
))
4026 return NETDEV_TX_OK
;
4028 switch (BOND_MODE(bond
)) {
4029 case BOND_MODE_ROUNDROBIN
:
4030 return bond_xmit_roundrobin(skb
, dev
);
4031 case BOND_MODE_ACTIVEBACKUP
:
4032 return bond_xmit_activebackup(skb
, dev
);
4033 case BOND_MODE_8023AD
:
4035 return bond_3ad_xor_xmit(skb
, dev
);
4036 case BOND_MODE_BROADCAST
:
4037 return bond_xmit_broadcast(skb
, dev
);
4039 return bond_alb_xmit(skb
, dev
);
4041 return bond_tlb_xmit(skb
, dev
);
4043 /* Should never happen, mode already checked */
4044 netdev_err(dev
, "Unknown bonding mode %d\n", BOND_MODE(bond
));
4046 bond_tx_drop(dev
, skb
);
4047 return NETDEV_TX_OK
;
4051 static netdev_tx_t
bond_start_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
4053 struct bonding
*bond
= netdev_priv(dev
);
4054 netdev_tx_t ret
= NETDEV_TX_OK
;
4056 /* If we risk deadlock from transmitting this in the
4057 * netpoll path, tell netpoll to queue the frame for later tx
4059 if (unlikely(is_netpoll_tx_blocked(dev
)))
4060 return NETDEV_TX_BUSY
;
4063 if (bond_has_slaves(bond
))
4064 ret
= __bond_start_xmit(skb
, dev
);
4066 bond_tx_drop(dev
, skb
);
4072 static int bond_ethtool_get_settings(struct net_device
*bond_dev
,
4073 struct ethtool_cmd
*ecmd
)
4075 struct bonding
*bond
= netdev_priv(bond_dev
);
4076 unsigned long speed
= 0;
4077 struct list_head
*iter
;
4078 struct slave
*slave
;
4080 ecmd
->duplex
= DUPLEX_UNKNOWN
;
4081 ecmd
->port
= PORT_OTHER
;
4083 /* Since bond_slave_can_tx returns false for all inactive or down slaves, we
4084 * do not need to check mode. Though link speed might not represent
4085 * the true receive or transmit bandwidth (not all modes are symmetric)
4086 * this is an accurate maximum.
4088 bond_for_each_slave(bond
, slave
, iter
) {
4089 if (bond_slave_can_tx(slave
)) {
4090 if (slave
->speed
!= SPEED_UNKNOWN
)
4091 speed
+= slave
->speed
;
4092 if (ecmd
->duplex
== DUPLEX_UNKNOWN
&&
4093 slave
->duplex
!= DUPLEX_UNKNOWN
)
4094 ecmd
->duplex
= slave
->duplex
;
4097 ethtool_cmd_speed_set(ecmd
, speed
? : SPEED_UNKNOWN
);
4102 static void bond_ethtool_get_drvinfo(struct net_device
*bond_dev
,
4103 struct ethtool_drvinfo
*drvinfo
)
4105 strlcpy(drvinfo
->driver
, DRV_NAME
, sizeof(drvinfo
->driver
));
4106 strlcpy(drvinfo
->version
, DRV_VERSION
, sizeof(drvinfo
->version
));
4107 snprintf(drvinfo
->fw_version
, sizeof(drvinfo
->fw_version
), "%d",
4111 static const struct ethtool_ops bond_ethtool_ops
= {
4112 .get_drvinfo
= bond_ethtool_get_drvinfo
,
4113 .get_settings
= bond_ethtool_get_settings
,
4114 .get_link
= ethtool_op_get_link
,
4117 static const struct net_device_ops bond_netdev_ops
= {
4118 .ndo_init
= bond_init
,
4119 .ndo_uninit
= bond_uninit
,
4120 .ndo_open
= bond_open
,
4121 .ndo_stop
= bond_close
,
4122 .ndo_start_xmit
= bond_start_xmit
,
4123 .ndo_select_queue
= bond_select_queue
,
4124 .ndo_get_stats64
= bond_get_stats
,
4125 .ndo_do_ioctl
= bond_do_ioctl
,
4126 .ndo_change_rx_flags
= bond_change_rx_flags
,
4127 .ndo_set_rx_mode
= bond_set_rx_mode
,
4128 .ndo_change_mtu
= bond_change_mtu
,
4129 .ndo_set_mac_address
= bond_set_mac_address
,
4130 .ndo_neigh_setup
= bond_neigh_setup
,
4131 .ndo_vlan_rx_add_vid
= bond_vlan_rx_add_vid
,
4132 .ndo_vlan_rx_kill_vid
= bond_vlan_rx_kill_vid
,
4133 #ifdef CONFIG_NET_POLL_CONTROLLER
4134 .ndo_netpoll_setup
= bond_netpoll_setup
,
4135 .ndo_netpoll_cleanup
= bond_netpoll_cleanup
,
4136 .ndo_poll_controller
= bond_poll_controller
,
4138 .ndo_add_slave
= bond_enslave
,
4139 .ndo_del_slave
= bond_release
,
4140 .ndo_fix_features
= bond_fix_features
,
4141 .ndo_bridge_setlink
= switchdev_port_bridge_setlink
,
4142 .ndo_bridge_getlink
= switchdev_port_bridge_getlink
,
4143 .ndo_bridge_dellink
= switchdev_port_bridge_dellink
,
4144 .ndo_fdb_add
= switchdev_port_fdb_add
,
4145 .ndo_fdb_del
= switchdev_port_fdb_del
,
4146 .ndo_fdb_dump
= switchdev_port_fdb_dump
,
4147 .ndo_features_check
= passthru_features_check
,
4150 static const struct device_type bond_type
= {
4154 static void bond_destructor(struct net_device
*bond_dev
)
4156 struct bonding
*bond
= netdev_priv(bond_dev
);
4158 destroy_workqueue(bond
->wq
);
4159 free_netdev(bond_dev
);
4162 void bond_setup(struct net_device
*bond_dev
)
4164 struct bonding
*bond
= netdev_priv(bond_dev
);
4166 spin_lock_init(&bond
->mode_lock
);
4167 spin_lock_init(&bond
->stats_lock
);
4168 bond
->params
= bonding_defaults
;
4170 /* Initialize pointers */
4171 bond
->dev
= bond_dev
;
4173 /* Initialize the device entry points */
4174 ether_setup(bond_dev
);
4175 bond_dev
->netdev_ops
= &bond_netdev_ops
;
4176 bond_dev
->ethtool_ops
= &bond_ethtool_ops
;
4178 bond_dev
->destructor
= bond_destructor
;
4180 SET_NETDEV_DEVTYPE(bond_dev
, &bond_type
);
4182 /* Initialize the device options */
4183 bond_dev
->flags
|= IFF_MASTER
;
4184 bond_dev
->priv_flags
|= IFF_BONDING
| IFF_UNICAST_FLT
| IFF_NO_QUEUE
;
4185 bond_dev
->priv_flags
&= ~(IFF_XMIT_DST_RELEASE
| IFF_TX_SKB_SHARING
);
4187 /* don't acquire bond device's netif_tx_lock when transmitting */
4188 bond_dev
->features
|= NETIF_F_LLTX
;
4190 /* By default, we declare the bond to be fully
4191 * VLAN hardware accelerated capable. Special
4192 * care is taken in the various xmit functions
4193 * when there are slaves that are not hw accel
4197 /* Don't allow bond devices to change network namespaces. */
4198 bond_dev
->features
|= NETIF_F_NETNS_LOCAL
;
4200 bond_dev
->hw_features
= BOND_VLAN_FEATURES
|
4201 NETIF_F_HW_VLAN_CTAG_TX
|
4202 NETIF_F_HW_VLAN_CTAG_RX
|
4203 NETIF_F_HW_VLAN_CTAG_FILTER
;
4205 bond_dev
->hw_features
|= NETIF_F_GSO_ENCAP_ALL
;
4206 bond_dev
->features
|= bond_dev
->hw_features
;
4209 /* Destroy a bonding device.
4210 * Must be under rtnl_lock when this function is called.
4212 static void bond_uninit(struct net_device
*bond_dev
)
4214 struct bonding
*bond
= netdev_priv(bond_dev
);
4215 struct list_head
*iter
;
4216 struct slave
*slave
;
4217 struct bond_up_slave
*arr
;
4219 bond_netpoll_cleanup(bond_dev
);
4221 /* Release the bonded slaves */
4222 bond_for_each_slave(bond
, slave
, iter
)
4223 __bond_release_one(bond_dev
, slave
->dev
, true);
4224 netdev_info(bond_dev
, "Released all slaves\n");
4226 arr
= rtnl_dereference(bond
->slave_arr
);
4228 RCU_INIT_POINTER(bond
->slave_arr
, NULL
);
4229 kfree_rcu(arr
, rcu
);
4232 list_del(&bond
->bond_list
);
4234 bond_debug_unregister(bond
);
4237 /*------------------------- Module initialization ---------------------------*/
4239 static int bond_check_params(struct bond_params
*params
)
4241 int arp_validate_value
, fail_over_mac_value
, primary_reselect_value
, i
;
4242 struct bond_opt_value newval
;
4243 const struct bond_opt_value
*valptr
;
4244 int arp_all_targets_value
;
4245 u16 ad_actor_sys_prio
= 0;
4246 u16 ad_user_port_key
= 0;
4248 /* Convert string parameters. */
4250 bond_opt_initstr(&newval
, mode
);
4251 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_MODE
), &newval
);
4253 pr_err("Error: Invalid bonding mode \"%s\"\n", mode
);
4256 bond_mode
= valptr
->value
;
4259 if (xmit_hash_policy
) {
4260 if ((bond_mode
!= BOND_MODE_XOR
) &&
4261 (bond_mode
!= BOND_MODE_8023AD
) &&
4262 (bond_mode
!= BOND_MODE_TLB
)) {
4263 pr_info("xmit_hash_policy param is irrelevant in mode %s\n",
4264 bond_mode_name(bond_mode
));
4266 bond_opt_initstr(&newval
, xmit_hash_policy
);
4267 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_XMIT_HASH
),
4270 pr_err("Error: Invalid xmit_hash_policy \"%s\"\n",
4274 xmit_hashtype
= valptr
->value
;
4279 if (bond_mode
!= BOND_MODE_8023AD
) {
4280 pr_info("lacp_rate param is irrelevant in mode %s\n",
4281 bond_mode_name(bond_mode
));
4283 bond_opt_initstr(&newval
, lacp_rate
);
4284 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_LACP_RATE
),
4287 pr_err("Error: Invalid lacp rate \"%s\"\n",
4291 lacp_fast
= valptr
->value
;
4296 bond_opt_initstr(&newval
, ad_select
);
4297 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_AD_SELECT
),
4300 pr_err("Error: Invalid ad_select \"%s\"\n", ad_select
);
4303 params
->ad_select
= valptr
->value
;
4304 if (bond_mode
!= BOND_MODE_8023AD
)
4305 pr_warn("ad_select param only affects 802.3ad mode\n");
4307 params
->ad_select
= BOND_AD_STABLE
;
4310 if (max_bonds
< 0) {
4311 pr_warn("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
4312 max_bonds
, 0, INT_MAX
, BOND_DEFAULT_MAX_BONDS
);
4313 max_bonds
= BOND_DEFAULT_MAX_BONDS
;
4317 pr_warn("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4323 pr_warn("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4328 if (downdelay
< 0) {
4329 pr_warn("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4330 downdelay
, INT_MAX
);
4334 if ((use_carrier
!= 0) && (use_carrier
!= 1)) {
4335 pr_warn("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n",
4340 if (num_peer_notif
< 0 || num_peer_notif
> 255) {
4341 pr_warn("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
4346 /* reset values for 802.3ad/TLB/ALB */
4347 if (!bond_mode_uses_arp(bond_mode
)) {
4349 pr_warn("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
4350 pr_warn("Forcing miimon to 100msec\n");
4351 miimon
= BOND_DEFAULT_MIIMON
;
4355 if (tx_queues
< 1 || tx_queues
> 255) {
4356 pr_warn("Warning: tx_queues (%d) should be between 1 and 255, resetting to %d\n",
4357 tx_queues
, BOND_DEFAULT_TX_QUEUES
);
4358 tx_queues
= BOND_DEFAULT_TX_QUEUES
;
4361 if ((all_slaves_active
!= 0) && (all_slaves_active
!= 1)) {
4362 pr_warn("Warning: all_slaves_active module parameter (%d), not of valid value (0/1), so it was set to 0\n",
4364 all_slaves_active
= 0;
4367 if (resend_igmp
< 0 || resend_igmp
> 255) {
4368 pr_warn("Warning: resend_igmp (%d) should be between 0 and 255, resetting to %d\n",
4369 resend_igmp
, BOND_DEFAULT_RESEND_IGMP
);
4370 resend_igmp
= BOND_DEFAULT_RESEND_IGMP
;
4373 bond_opt_initval(&newval
, packets_per_slave
);
4374 if (!bond_opt_parse(bond_opt_get(BOND_OPT_PACKETS_PER_SLAVE
), &newval
)) {
4375 pr_warn("Warning: packets_per_slave (%d) should be between 0 and %u resetting to 1\n",
4376 packets_per_slave
, USHRT_MAX
);
4377 packets_per_slave
= 1;
4380 if (bond_mode
== BOND_MODE_ALB
) {
4381 pr_notice("In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (%d msec) is incompatible with the forwarding delay time of the switch\n",
4386 if (updelay
|| downdelay
) {
4387 /* just warn the user the up/down delay will have
4388 * no effect since miimon is zero...
4390 pr_warn("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",
4391 updelay
, downdelay
);
4394 /* don't allow arp monitoring */
4396 pr_warn("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",
4397 miimon
, arp_interval
);
4401 if ((updelay
% miimon
) != 0) {
4402 pr_warn("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
4403 updelay
, miimon
, (updelay
/ miimon
) * miimon
);
4408 if ((downdelay
% miimon
) != 0) {
4409 pr_warn("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",
4411 (downdelay
/ miimon
) * miimon
);
4414 downdelay
/= miimon
;
4417 if (arp_interval
< 0) {
4418 pr_warn("Warning: arp_interval module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4419 arp_interval
, INT_MAX
);
4423 for (arp_ip_count
= 0, i
= 0;
4424 (arp_ip_count
< BOND_MAX_ARP_TARGETS
) && arp_ip_target
[i
]; i
++) {
4427 /* not a complete check, but good enough to catch mistakes */
4428 if (!in4_pton(arp_ip_target
[i
], -1, (u8
*)&ip
, -1, NULL
) ||
4429 !bond_is_ip_target_ok(ip
)) {
4430 pr_warn("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
4434 if (bond_get_targets_ip(arp_target
, ip
) == -1)
4435 arp_target
[arp_ip_count
++] = ip
;
4437 pr_warn("Warning: duplicate address %pI4 in arp_ip_target, skipping\n",
4442 if (arp_interval
&& !arp_ip_count
) {
4443 /* don't allow arping if no arp_ip_target given... */
4444 pr_warn("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",
4450 if (!arp_interval
) {
4451 pr_err("arp_validate requires arp_interval\n");
4455 bond_opt_initstr(&newval
, arp_validate
);
4456 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_ARP_VALIDATE
),
4459 pr_err("Error: invalid arp_validate \"%s\"\n",
4463 arp_validate_value
= valptr
->value
;
4465 arp_validate_value
= 0;
4468 arp_all_targets_value
= 0;
4469 if (arp_all_targets
) {
4470 bond_opt_initstr(&newval
, arp_all_targets
);
4471 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_ARP_ALL_TARGETS
),
4474 pr_err("Error: invalid arp_all_targets_value \"%s\"\n",
4476 arp_all_targets_value
= 0;
4478 arp_all_targets_value
= valptr
->value
;
4483 pr_info("MII link monitoring set to %d ms\n", miimon
);
4484 } else if (arp_interval
) {
4485 valptr
= bond_opt_get_val(BOND_OPT_ARP_VALIDATE
,
4486 arp_validate_value
);
4487 pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):",
4488 arp_interval
, valptr
->string
, arp_ip_count
);
4490 for (i
= 0; i
< arp_ip_count
; i
++)
4491 pr_cont(" %s", arp_ip_target
[i
]);
4495 } else if (max_bonds
) {
4496 /* miimon and arp_interval not set, we need one so things
4497 * work as expected, see bonding.txt for details
4499 pr_debug("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details\n");
4502 if (primary
&& !bond_mode_uses_primary(bond_mode
)) {
4503 /* currently, using a primary only makes sense
4504 * in active backup, TLB or ALB modes
4506 pr_warn("Warning: %s primary device specified but has no effect in %s mode\n",
4507 primary
, bond_mode_name(bond_mode
));
4511 if (primary
&& primary_reselect
) {
4512 bond_opt_initstr(&newval
, primary_reselect
);
4513 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_PRIMARY_RESELECT
),
4516 pr_err("Error: Invalid primary_reselect \"%s\"\n",
4520 primary_reselect_value
= valptr
->value
;
4522 primary_reselect_value
= BOND_PRI_RESELECT_ALWAYS
;
4525 if (fail_over_mac
) {
4526 bond_opt_initstr(&newval
, fail_over_mac
);
4527 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_FAIL_OVER_MAC
),
4530 pr_err("Error: invalid fail_over_mac \"%s\"\n",
4534 fail_over_mac_value
= valptr
->value
;
4535 if (bond_mode
!= BOND_MODE_ACTIVEBACKUP
)
4536 pr_warn("Warning: fail_over_mac only affects active-backup mode\n");
4538 fail_over_mac_value
= BOND_FOM_NONE
;
4541 bond_opt_initstr(&newval
, "default");
4542 valptr
= bond_opt_parse(
4543 bond_opt_get(BOND_OPT_AD_ACTOR_SYS_PRIO
),
4546 pr_err("Error: No ad_actor_sys_prio default value");
4549 ad_actor_sys_prio
= valptr
->value
;
4551 valptr
= bond_opt_parse(bond_opt_get(BOND_OPT_AD_USER_PORT_KEY
),
4554 pr_err("Error: No ad_user_port_key default value");
4557 ad_user_port_key
= valptr
->value
;
4559 if (lp_interval
== 0) {
4560 pr_warn("Warning: ip_interval must be between 1 and %d, so it was reset to %d\n",
4561 INT_MAX
, BOND_ALB_DEFAULT_LP_INTERVAL
);
4562 lp_interval
= BOND_ALB_DEFAULT_LP_INTERVAL
;
4565 /* fill params struct with the proper values */
4566 params
->mode
= bond_mode
;
4567 params
->xmit_policy
= xmit_hashtype
;
4568 params
->miimon
= miimon
;
4569 params
->num_peer_notif
= num_peer_notif
;
4570 params
->arp_interval
= arp_interval
;
4571 params
->arp_validate
= arp_validate_value
;
4572 params
->arp_all_targets
= arp_all_targets_value
;
4573 params
->updelay
= updelay
;
4574 params
->downdelay
= downdelay
;
4575 params
->use_carrier
= use_carrier
;
4576 params
->lacp_fast
= lacp_fast
;
4577 params
->primary
[0] = 0;
4578 params
->primary_reselect
= primary_reselect_value
;
4579 params
->fail_over_mac
= fail_over_mac_value
;
4580 params
->tx_queues
= tx_queues
;
4581 params
->all_slaves_active
= all_slaves_active
;
4582 params
->resend_igmp
= resend_igmp
;
4583 params
->min_links
= min_links
;
4584 params
->lp_interval
= lp_interval
;
4585 params
->packets_per_slave
= packets_per_slave
;
4586 params
->tlb_dynamic_lb
= 1; /* Default value */
4587 params
->ad_actor_sys_prio
= ad_actor_sys_prio
;
4588 eth_zero_addr(params
->ad_actor_system
);
4589 params
->ad_user_port_key
= ad_user_port_key
;
4590 if (packets_per_slave
> 0) {
4591 params
->reciprocal_packets_per_slave
=
4592 reciprocal_value(packets_per_slave
);
4594 /* reciprocal_packets_per_slave is unused if
4595 * packets_per_slave is 0 or 1, just initialize it
4597 params
->reciprocal_packets_per_slave
=
4598 (struct reciprocal_value
) { 0 };
4602 strncpy(params
->primary
, primary
, IFNAMSIZ
);
4603 params
->primary
[IFNAMSIZ
- 1] = 0;
4606 memcpy(params
->arp_targets
, arp_target
, sizeof(arp_target
));
4611 static struct lock_class_key bonding_netdev_xmit_lock_key
;
4612 static struct lock_class_key bonding_netdev_addr_lock_key
;
4613 static struct lock_class_key bonding_tx_busylock_key
;
4615 static void bond_set_lockdep_class_one(struct net_device
*dev
,
4616 struct netdev_queue
*txq
,
4619 lockdep_set_class(&txq
->_xmit_lock
,
4620 &bonding_netdev_xmit_lock_key
);
4623 static void bond_set_lockdep_class(struct net_device
*dev
)
4625 lockdep_set_class(&dev
->addr_list_lock
,
4626 &bonding_netdev_addr_lock_key
);
4627 netdev_for_each_tx_queue(dev
, bond_set_lockdep_class_one
, NULL
);
4628 dev
->qdisc_tx_busylock
= &bonding_tx_busylock_key
;
4631 /* Called from registration process */
4632 static int bond_init(struct net_device
*bond_dev
)
4634 struct bonding
*bond
= netdev_priv(bond_dev
);
4635 struct bond_net
*bn
= net_generic(dev_net(bond_dev
), bond_net_id
);
4637 netdev_dbg(bond_dev
, "Begin bond_init\n");
4639 bond
->wq
= create_singlethread_workqueue(bond_dev
->name
);
4643 bond_set_lockdep_class(bond_dev
);
4645 list_add_tail(&bond
->bond_list
, &bn
->dev_list
);
4647 bond_prepare_sysfs_group(bond
);
4649 bond_debug_register(bond
);
4651 /* Ensure valid dev_addr */
4652 if (is_zero_ether_addr(bond_dev
->dev_addr
) &&
4653 bond_dev
->addr_assign_type
== NET_ADDR_PERM
)
4654 eth_hw_addr_random(bond_dev
);
4659 unsigned int bond_get_num_tx_queues(void)
4664 /* Create a new bond based on the specified name and bonding parameters.
4665 * If name is NULL, obtain a suitable "bond%d" name for us.
4666 * Caller must NOT hold rtnl_lock; we need to release it here before we
4667 * set up our sysfs entries.
4669 int bond_create(struct net
*net
, const char *name
)
4671 struct net_device
*bond_dev
;
4672 struct bonding
*bond
;
4673 struct alb_bond_info
*bond_info
;
4678 bond_dev
= alloc_netdev_mq(sizeof(struct bonding
),
4679 name
? name
: "bond%d", NET_NAME_UNKNOWN
,
4680 bond_setup
, tx_queues
);
4682 pr_err("%s: eek! can't alloc netdev!\n", name
);
4688 * Initialize rx_hashtbl_used_head to RLB_NULL_INDEX.
4689 * It is set to 0 by default which is wrong.
4691 bond
= netdev_priv(bond_dev
);
4692 bond_info
= &(BOND_ALB_INFO(bond
));
4693 bond_info
->rx_hashtbl_used_head
= RLB_NULL_INDEX
;
4695 dev_net_set(bond_dev
, net
);
4696 bond_dev
->rtnl_link_ops
= &bond_link_ops
;
4698 res
= register_netdevice(bond_dev
);
4700 netif_carrier_off(bond_dev
);
4704 bond_destructor(bond_dev
);
4708 static int __net_init
bond_net_init(struct net
*net
)
4710 struct bond_net
*bn
= net_generic(net
, bond_net_id
);
4713 INIT_LIST_HEAD(&bn
->dev_list
);
4715 bond_create_proc_dir(bn
);
4716 bond_create_sysfs(bn
);
4721 static void __net_exit
bond_net_exit(struct net
*net
)
4723 struct bond_net
*bn
= net_generic(net
, bond_net_id
);
4724 struct bonding
*bond
, *tmp_bond
;
4727 bond_destroy_sysfs(bn
);
4729 /* Kill off any bonds created after unregistering bond rtnl ops */
4731 list_for_each_entry_safe(bond
, tmp_bond
, &bn
->dev_list
, bond_list
)
4732 unregister_netdevice_queue(bond
->dev
, &list
);
4733 unregister_netdevice_many(&list
);
4736 bond_destroy_proc_dir(bn
);
4739 static struct pernet_operations bond_net_ops
= {
4740 .init
= bond_net_init
,
4741 .exit
= bond_net_exit
,
4743 .size
= sizeof(struct bond_net
),
4746 static int __init
bonding_init(void)
4751 pr_info("%s", bond_version
);
4753 res
= bond_check_params(&bonding_defaults
);
4757 res
= register_pernet_subsys(&bond_net_ops
);
4761 res
= bond_netlink_init();
4765 bond_create_debugfs();
4767 for (i
= 0; i
< max_bonds
; i
++) {
4768 res
= bond_create(&init_net
, NULL
);
4773 register_netdevice_notifier(&bond_netdev_notifier
);
4777 bond_destroy_debugfs();
4778 bond_netlink_fini();
4780 unregister_pernet_subsys(&bond_net_ops
);
4785 static void __exit
bonding_exit(void)
4787 unregister_netdevice_notifier(&bond_netdev_notifier
);
4789 bond_destroy_debugfs();
4791 bond_netlink_fini();
4792 unregister_pernet_subsys(&bond_net_ops
);
4794 #ifdef CONFIG_NET_POLL_CONTROLLER
4795 /* Make sure we don't have an imbalance on our netpoll blocking */
4796 WARN_ON(atomic_read(&netpoll_block_tx
));
4800 module_init(bonding_init
);
4801 module_exit(bonding_exit
);
4802 MODULE_LICENSE("GPL");
4803 MODULE_VERSION(DRV_VERSION
);
4804 MODULE_DESCRIPTION(DRV_DESCRIPTION
", v" DRV_VERSION
);
4805 MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");