net/mlx4_en: Move filters cleanup to a proper location
[linux/fpc-iii.git] / drivers / net / usb / sr9800.c
bloba50df0d8fb9abbd548ad6646e4a066a1211363c5
1 /* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
3 * Author : Liu Junliang <liujunliang_ljl@163.com>
5 * Based on asix_common.c, asix_devices.c
7 * This file is licensed under the terms of the GNU General Public License
8 * version 2. This program is licensed "as is" without any warranty of any
9 * kind, whether express or implied.*
12 #include <linux/module.h>
13 #include <linux/kmod.h>
14 #include <linux/init.h>
15 #include <linux/netdevice.h>
16 #include <linux/etherdevice.h>
17 #include <linux/ethtool.h>
18 #include <linux/workqueue.h>
19 #include <linux/mii.h>
20 #include <linux/usb.h>
21 #include <linux/crc32.h>
22 #include <linux/usb/usbnet.h>
23 #include <linux/slab.h>
24 #include <linux/if_vlan.h>
26 #include "sr9800.h"
28 static int sr_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
29 u16 size, void *data)
31 int err;
33 err = usbnet_read_cmd(dev, cmd, SR_REQ_RD_REG, value, index,
34 data, size);
35 if ((err != size) && (err >= 0))
36 err = -EINVAL;
38 return err;
41 static int sr_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
42 u16 size, void *data)
44 int err;
46 err = usbnet_write_cmd(dev, cmd, SR_REQ_WR_REG, value, index,
47 data, size);
48 if ((err != size) && (err >= 0))
49 err = -EINVAL;
51 return err;
54 static void
55 sr_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
56 u16 size, void *data)
58 usbnet_write_cmd_async(dev, cmd, SR_REQ_WR_REG, value, index, data,
59 size);
62 static int sr_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
64 int offset = 0;
66 /* This check is no longer done by usbnet */
67 if (skb->len < dev->net->hard_header_len)
68 return 0;
70 while (offset + sizeof(u32) < skb->len) {
71 struct sk_buff *sr_skb;
72 u16 size;
73 u32 header = get_unaligned_le32(skb->data + offset);
75 offset += sizeof(u32);
76 /* get the packet length */
77 size = (u16) (header & 0x7ff);
78 if (size != ((~header >> 16) & 0x07ff)) {
79 netdev_err(dev->net, "%s : Bad Header Length\n",
80 __func__);
81 return 0;
84 if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) ||
85 (size + offset > skb->len)) {
86 netdev_err(dev->net, "%s : Bad RX Length %d\n",
87 __func__, size);
88 return 0;
90 sr_skb = netdev_alloc_skb_ip_align(dev->net, size);
91 if (!sr_skb)
92 return 0;
94 skb_put(sr_skb, size);
95 memcpy(sr_skb->data, skb->data + offset, size);
96 usbnet_skb_return(dev, sr_skb);
98 offset += (size + 1) & 0xfffe;
101 if (skb->len != offset) {
102 netdev_err(dev->net, "%s : Bad SKB Length %d\n", __func__,
103 skb->len);
104 return 0;
107 return 1;
110 static struct sk_buff *sr_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
111 gfp_t flags)
113 int headroom = skb_headroom(skb);
114 int tailroom = skb_tailroom(skb);
115 u32 padbytes = 0xffff0000;
116 u32 packet_len;
117 int padlen;
119 padlen = ((skb->len + 4) % (dev->maxpacket - 1)) ? 0 : 4;
121 if ((!skb_cloned(skb)) && ((headroom + tailroom) >= (4 + padlen))) {
122 if ((headroom < 4) || (tailroom < padlen)) {
123 skb->data = memmove(skb->head + 4, skb->data,
124 skb->len);
125 skb_set_tail_pointer(skb, skb->len);
127 } else {
128 struct sk_buff *skb2;
129 skb2 = skb_copy_expand(skb, 4, padlen, flags);
130 dev_kfree_skb_any(skb);
131 skb = skb2;
132 if (!skb)
133 return NULL;
136 skb_push(skb, 4);
137 packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
138 cpu_to_le32s(&packet_len);
139 skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
141 if (padlen) {
142 cpu_to_le32s(&padbytes);
143 memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
144 skb_put(skb, sizeof(padbytes));
147 usbnet_set_skb_tx_stats(skb, 1, 0);
148 return skb;
151 static void sr_status(struct usbnet *dev, struct urb *urb)
153 struct sr9800_int_data *event;
154 int link;
156 if (urb->actual_length < 8)
157 return;
159 event = urb->transfer_buffer;
160 link = event->link & 0x01;
161 if (netif_carrier_ok(dev->net) != link) {
162 usbnet_link_change(dev, link, 1);
163 netdev_dbg(dev->net, "Link Status is: %d\n", link);
166 return;
169 static inline int sr_set_sw_mii(struct usbnet *dev)
171 int ret;
173 ret = sr_write_cmd(dev, SR_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
174 if (ret < 0)
175 netdev_err(dev->net, "Failed to enable software MII access\n");
176 return ret;
179 static inline int sr_set_hw_mii(struct usbnet *dev)
181 int ret;
183 ret = sr_write_cmd(dev, SR_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
184 if (ret < 0)
185 netdev_err(dev->net, "Failed to enable hardware MII access\n");
186 return ret;
189 static inline int sr_get_phy_addr(struct usbnet *dev)
191 u8 buf[2];
192 int ret;
194 ret = sr_read_cmd(dev, SR_CMD_READ_PHY_ID, 0, 0, 2, buf);
195 if (ret < 0) {
196 netdev_err(dev->net, "%s : Error reading PHYID register:%02x\n",
197 __func__, ret);
198 goto out;
200 netdev_dbg(dev->net, "%s : returning 0x%04x\n", __func__,
201 *((__le16 *)buf));
203 ret = buf[1];
205 out:
206 return ret;
209 static int sr_sw_reset(struct usbnet *dev, u8 flags)
211 int ret;
213 ret = sr_write_cmd(dev, SR_CMD_SW_RESET, flags, 0, 0, NULL);
214 if (ret < 0)
215 netdev_err(dev->net, "Failed to send software reset:%02x\n",
216 ret);
218 return ret;
221 static u16 sr_read_rx_ctl(struct usbnet *dev)
223 __le16 v;
224 int ret;
226 ret = sr_read_cmd(dev, SR_CMD_READ_RX_CTL, 0, 0, 2, &v);
227 if (ret < 0) {
228 netdev_err(dev->net, "Error reading RX_CTL register:%02x\n",
229 ret);
230 goto out;
233 ret = le16_to_cpu(v);
234 out:
235 return ret;
238 static int sr_write_rx_ctl(struct usbnet *dev, u16 mode)
240 int ret;
242 netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
243 ret = sr_write_cmd(dev, SR_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
244 if (ret < 0)
245 netdev_err(dev->net,
246 "Failed to write RX_CTL mode to 0x%04x:%02x\n",
247 mode, ret);
249 return ret;
252 static u16 sr_read_medium_status(struct usbnet *dev)
254 __le16 v;
255 int ret;
257 ret = sr_read_cmd(dev, SR_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
258 if (ret < 0) {
259 netdev_err(dev->net,
260 "Error reading Medium Status register:%02x\n", ret);
261 return ret; /* TODO: callers not checking for error ret */
264 return le16_to_cpu(v);
267 static int sr_write_medium_mode(struct usbnet *dev, u16 mode)
269 int ret;
271 netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
272 ret = sr_write_cmd(dev, SR_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
273 if (ret < 0)
274 netdev_err(dev->net,
275 "Failed to write Medium Mode mode to 0x%04x:%02x\n",
276 mode, ret);
277 return ret;
280 static int sr_write_gpio(struct usbnet *dev, u16 value, int sleep)
282 int ret;
284 netdev_dbg(dev->net, "%s : value = 0x%04x\n", __func__, value);
285 ret = sr_write_cmd(dev, SR_CMD_WRITE_GPIOS, value, 0, 0, NULL);
286 if (ret < 0)
287 netdev_err(dev->net, "Failed to write GPIO value 0x%04x:%02x\n",
288 value, ret);
289 if (sleep)
290 msleep(sleep);
292 return ret;
295 /* SR9800 have a 16-bit RX_CTL value */
296 static void sr_set_multicast(struct net_device *net)
298 struct usbnet *dev = netdev_priv(net);
299 struct sr_data *data = (struct sr_data *)&dev->data;
300 u16 rx_ctl = SR_DEFAULT_RX_CTL;
302 if (net->flags & IFF_PROMISC) {
303 rx_ctl |= SR_RX_CTL_PRO;
304 } else if (net->flags & IFF_ALLMULTI ||
305 netdev_mc_count(net) > SR_MAX_MCAST) {
306 rx_ctl |= SR_RX_CTL_AMALL;
307 } else if (netdev_mc_empty(net)) {
308 /* just broadcast and directed */
309 } else {
310 /* We use the 20 byte dev->data
311 * for our 8 byte filter buffer
312 * to avoid allocating memory that
313 * is tricky to free later
315 struct netdev_hw_addr *ha;
316 u32 crc_bits;
318 memset(data->multi_filter, 0, SR_MCAST_FILTER_SIZE);
320 /* Build the multicast hash filter. */
321 netdev_for_each_mc_addr(ha, net) {
322 crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
323 data->multi_filter[crc_bits >> 3] |=
324 1 << (crc_bits & 7);
327 sr_write_cmd_async(dev, SR_CMD_WRITE_MULTI_FILTER, 0, 0,
328 SR_MCAST_FILTER_SIZE, data->multi_filter);
330 rx_ctl |= SR_RX_CTL_AM;
333 sr_write_cmd_async(dev, SR_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
336 static int sr_mdio_read(struct net_device *net, int phy_id, int loc)
338 struct usbnet *dev = netdev_priv(net);
339 __le16 res;
341 mutex_lock(&dev->phy_mutex);
342 sr_set_sw_mii(dev);
343 sr_read_cmd(dev, SR_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, &res);
344 sr_set_hw_mii(dev);
345 mutex_unlock(&dev->phy_mutex);
347 netdev_dbg(dev->net,
348 "%s : phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", __func__,
349 phy_id, loc, le16_to_cpu(res));
351 return le16_to_cpu(res);
354 static void
355 sr_mdio_write(struct net_device *net, int phy_id, int loc, int val)
357 struct usbnet *dev = netdev_priv(net);
358 __le16 res = cpu_to_le16(val);
360 netdev_dbg(dev->net,
361 "%s : phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", __func__,
362 phy_id, loc, val);
363 mutex_lock(&dev->phy_mutex);
364 sr_set_sw_mii(dev);
365 sr_write_cmd(dev, SR_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
366 sr_set_hw_mii(dev);
367 mutex_unlock(&dev->phy_mutex);
370 /* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
371 static u32 sr_get_phyid(struct usbnet *dev)
373 int phy_reg;
374 u32 phy_id;
375 int i;
377 /* Poll for the rare case the FW or phy isn't ready yet. */
378 for (i = 0; i < 100; i++) {
379 phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
380 if (phy_reg != 0 && phy_reg != 0xFFFF)
381 break;
382 mdelay(1);
385 if (phy_reg <= 0 || phy_reg == 0xFFFF)
386 return 0;
388 phy_id = (phy_reg & 0xffff) << 16;
390 phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
391 if (phy_reg < 0)
392 return 0;
394 phy_id |= (phy_reg & 0xffff);
396 return phy_id;
399 static void
400 sr_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
402 struct usbnet *dev = netdev_priv(net);
403 u8 opt;
405 if (sr_read_cmd(dev, SR_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
406 wolinfo->supported = 0;
407 wolinfo->wolopts = 0;
408 return;
410 wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
411 wolinfo->wolopts = 0;
412 if (opt & SR_MONITOR_LINK)
413 wolinfo->wolopts |= WAKE_PHY;
414 if (opt & SR_MONITOR_MAGIC)
415 wolinfo->wolopts |= WAKE_MAGIC;
418 static int
419 sr_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
421 struct usbnet *dev = netdev_priv(net);
422 u8 opt = 0;
424 if (wolinfo->wolopts & WAKE_PHY)
425 opt |= SR_MONITOR_LINK;
426 if (wolinfo->wolopts & WAKE_MAGIC)
427 opt |= SR_MONITOR_MAGIC;
429 if (sr_write_cmd(dev, SR_CMD_WRITE_MONITOR_MODE,
430 opt, 0, 0, NULL) < 0)
431 return -EINVAL;
433 return 0;
436 static int sr_get_eeprom_len(struct net_device *net)
438 struct usbnet *dev = netdev_priv(net);
439 struct sr_data *data = (struct sr_data *)&dev->data;
441 return data->eeprom_len;
444 static int sr_get_eeprom(struct net_device *net,
445 struct ethtool_eeprom *eeprom, u8 *data)
447 struct usbnet *dev = netdev_priv(net);
448 __le16 *ebuf = (__le16 *)data;
449 int ret;
450 int i;
452 /* Crude hack to ensure that we don't overwrite memory
453 * if an odd length is supplied
455 if (eeprom->len % 2)
456 return -EINVAL;
458 eeprom->magic = SR_EEPROM_MAGIC;
460 /* sr9800 returns 2 bytes from eeprom on read */
461 for (i = 0; i < eeprom->len / 2; i++) {
462 ret = sr_read_cmd(dev, SR_CMD_READ_EEPROM, eeprom->offset + i,
463 0, 2, &ebuf[i]);
464 if (ret < 0)
465 return -EINVAL;
467 return 0;
470 static void sr_get_drvinfo(struct net_device *net,
471 struct ethtool_drvinfo *info)
473 /* Inherit standard device info */
474 usbnet_get_drvinfo(net, info);
475 strncpy(info->driver, DRIVER_NAME, sizeof(info->driver));
476 strncpy(info->version, DRIVER_VERSION, sizeof(info->version));
479 static u32 sr_get_link(struct net_device *net)
481 struct usbnet *dev = netdev_priv(net);
483 return mii_link_ok(&dev->mii);
486 static int sr_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
488 struct usbnet *dev = netdev_priv(net);
490 return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
493 static int sr_set_mac_address(struct net_device *net, void *p)
495 struct usbnet *dev = netdev_priv(net);
496 struct sr_data *data = (struct sr_data *)&dev->data;
497 struct sockaddr *addr = p;
499 if (netif_running(net))
500 return -EBUSY;
501 if (!is_valid_ether_addr(addr->sa_data))
502 return -EADDRNOTAVAIL;
504 memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
506 /* We use the 20 byte dev->data
507 * for our 6 byte mac buffer
508 * to avoid allocating memory that
509 * is tricky to free later
511 memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
512 sr_write_cmd_async(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
513 data->mac_addr);
515 return 0;
518 static const struct ethtool_ops sr9800_ethtool_ops = {
519 .get_drvinfo = sr_get_drvinfo,
520 .get_link = sr_get_link,
521 .get_msglevel = usbnet_get_msglevel,
522 .set_msglevel = usbnet_set_msglevel,
523 .get_wol = sr_get_wol,
524 .set_wol = sr_set_wol,
525 .get_eeprom_len = sr_get_eeprom_len,
526 .get_eeprom = sr_get_eeprom,
527 .get_settings = usbnet_get_settings,
528 .set_settings = usbnet_set_settings,
529 .nway_reset = usbnet_nway_reset,
532 static int sr9800_link_reset(struct usbnet *dev)
534 struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
535 u16 mode;
537 mii_check_media(&dev->mii, 1, 1);
538 mii_ethtool_gset(&dev->mii, &ecmd);
539 mode = SR9800_MEDIUM_DEFAULT;
541 if (ethtool_cmd_speed(&ecmd) != SPEED_100)
542 mode &= ~SR_MEDIUM_PS;
544 if (ecmd.duplex != DUPLEX_FULL)
545 mode &= ~SR_MEDIUM_FD;
547 netdev_dbg(dev->net, "%s : speed: %u duplex: %d mode: 0x%04x\n",
548 __func__, ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
550 sr_write_medium_mode(dev, mode);
552 return 0;
556 static int sr9800_set_default_mode(struct usbnet *dev)
558 u16 rx_ctl;
559 int ret;
561 sr_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
562 sr_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
563 ADVERTISE_ALL | ADVERTISE_CSMA);
564 mii_nway_restart(&dev->mii);
566 ret = sr_write_medium_mode(dev, SR9800_MEDIUM_DEFAULT);
567 if (ret < 0)
568 goto out;
570 ret = sr_write_cmd(dev, SR_CMD_WRITE_IPG012,
571 SR9800_IPG0_DEFAULT | SR9800_IPG1_DEFAULT,
572 SR9800_IPG2_DEFAULT, 0, NULL);
573 if (ret < 0) {
574 netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
575 goto out;
578 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
579 ret = sr_write_rx_ctl(dev, SR_DEFAULT_RX_CTL);
580 if (ret < 0)
581 goto out;
583 rx_ctl = sr_read_rx_ctl(dev);
584 netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
585 rx_ctl);
587 rx_ctl = sr_read_medium_status(dev);
588 netdev_dbg(dev->net, "Medium Status:0x%04x after all initializations\n",
589 rx_ctl);
591 return 0;
592 out:
593 return ret;
596 static int sr9800_reset(struct usbnet *dev)
598 struct sr_data *data = (struct sr_data *)&dev->data;
599 int ret, embd_phy;
600 u16 rx_ctl;
602 ret = sr_write_gpio(dev,
603 SR_GPIO_RSE | SR_GPIO_GPO_2 | SR_GPIO_GPO2EN, 5);
604 if (ret < 0)
605 goto out;
607 embd_phy = ((sr_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
609 ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
610 if (ret < 0) {
611 netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
612 goto out;
615 ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_PRL);
616 if (ret < 0)
617 goto out;
619 msleep(150);
621 ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
622 if (ret < 0)
623 goto out;
625 msleep(150);
627 if (embd_phy) {
628 ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
629 if (ret < 0)
630 goto out;
631 } else {
632 ret = sr_sw_reset(dev, SR_SWRESET_PRTE);
633 if (ret < 0)
634 goto out;
637 msleep(150);
638 rx_ctl = sr_read_rx_ctl(dev);
639 netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
640 ret = sr_write_rx_ctl(dev, 0x0000);
641 if (ret < 0)
642 goto out;
644 rx_ctl = sr_read_rx_ctl(dev);
645 netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
647 ret = sr_sw_reset(dev, SR_SWRESET_PRL);
648 if (ret < 0)
649 goto out;
651 msleep(150);
653 ret = sr_sw_reset(dev, SR_SWRESET_IPRL | SR_SWRESET_PRL);
654 if (ret < 0)
655 goto out;
657 msleep(150);
659 ret = sr9800_set_default_mode(dev);
660 if (ret < 0)
661 goto out;
663 /* Rewrite MAC address */
664 memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
665 ret = sr_write_cmd(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
666 data->mac_addr);
667 if (ret < 0)
668 goto out;
670 return 0;
672 out:
673 return ret;
676 static const struct net_device_ops sr9800_netdev_ops = {
677 .ndo_open = usbnet_open,
678 .ndo_stop = usbnet_stop,
679 .ndo_start_xmit = usbnet_start_xmit,
680 .ndo_tx_timeout = usbnet_tx_timeout,
681 .ndo_change_mtu = usbnet_change_mtu,
682 .ndo_set_mac_address = sr_set_mac_address,
683 .ndo_validate_addr = eth_validate_addr,
684 .ndo_do_ioctl = sr_ioctl,
685 .ndo_set_rx_mode = sr_set_multicast,
688 static int sr9800_phy_powerup(struct usbnet *dev)
690 int ret;
692 /* set the embedded Ethernet PHY in power-down state */
693 ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_IPRL);
694 if (ret < 0) {
695 netdev_err(dev->net, "Failed to power down PHY : %d\n", ret);
696 return ret;
698 msleep(20);
700 /* set the embedded Ethernet PHY in power-up state */
701 ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
702 if (ret < 0) {
703 netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
704 return ret;
706 msleep(600);
708 /* set the embedded Ethernet PHY in reset state */
709 ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
710 if (ret < 0) {
711 netdev_err(dev->net, "Failed to power up PHY: %d\n", ret);
712 return ret;
714 msleep(20);
716 /* set the embedded Ethernet PHY in power-up state */
717 ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
718 if (ret < 0) {
719 netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
720 return ret;
723 return 0;
726 static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf)
728 struct sr_data *data = (struct sr_data *)&dev->data;
729 u16 led01_mux, led23_mux;
730 int ret, embd_phy;
731 u32 phyid;
732 u16 rx_ctl;
734 data->eeprom_len = SR9800_EEPROM_LEN;
736 usbnet_get_endpoints(dev, intf);
738 /* LED Setting Rule :
739 * AABB:CCDD
740 * AA : MFA0(LED0)
741 * BB : MFA1(LED1)
742 * CC : MFA2(LED2), Reserved for SR9800
743 * DD : MFA3(LED3), Reserved for SR9800
745 led01_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_LINK;
746 led23_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_TX_ACTIVE;
747 ret = sr_write_cmd(dev, SR_CMD_LED_MUX, led01_mux, led23_mux, 0, NULL);
748 if (ret < 0) {
749 netdev_err(dev->net, "set LINK LED failed : %d\n", ret);
750 goto out;
753 /* Get the MAC address */
754 ret = sr_read_cmd(dev, SR_CMD_READ_NODE_ID, 0, 0, ETH_ALEN,
755 dev->net->dev_addr);
756 if (ret < 0) {
757 netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
758 return ret;
760 netdev_dbg(dev->net, "mac addr : %pM\n", dev->net->dev_addr);
762 /* Initialize MII structure */
763 dev->mii.dev = dev->net;
764 dev->mii.mdio_read = sr_mdio_read;
765 dev->mii.mdio_write = sr_mdio_write;
766 dev->mii.phy_id_mask = 0x1f;
767 dev->mii.reg_num_mask = 0x1f;
768 dev->mii.phy_id = sr_get_phy_addr(dev);
770 dev->net->netdev_ops = &sr9800_netdev_ops;
771 dev->net->ethtool_ops = &sr9800_ethtool_ops;
773 embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
774 /* Reset the PHY to normal operation mode */
775 ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
776 if (ret < 0) {
777 netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
778 return ret;
781 /* Init PHY routine */
782 ret = sr9800_phy_powerup(dev);
783 if (ret < 0)
784 goto out;
786 rx_ctl = sr_read_rx_ctl(dev);
787 netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
788 ret = sr_write_rx_ctl(dev, 0x0000);
789 if (ret < 0)
790 goto out;
792 rx_ctl = sr_read_rx_ctl(dev);
793 netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
795 /* Read PHYID register *AFTER* the PHY was reset properly */
796 phyid = sr_get_phyid(dev);
797 netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
799 /* medium mode setting */
800 ret = sr9800_set_default_mode(dev);
801 if (ret < 0)
802 goto out;
804 if (dev->udev->speed == USB_SPEED_HIGH) {
805 ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
806 SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].byte_cnt,
807 SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].threshold,
808 0, NULL);
809 if (ret < 0) {
810 netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
811 goto out;
813 dev->rx_urb_size =
814 SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].size;
815 } else {
816 ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
817 SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].byte_cnt,
818 SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].threshold,
819 0, NULL);
820 if (ret < 0) {
821 netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
822 goto out;
824 dev->rx_urb_size =
825 SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].size;
827 netdev_dbg(dev->net, "%s : setting rx_urb_size with : %zu\n", __func__,
828 dev->rx_urb_size);
829 return 0;
831 out:
832 return ret;
835 static const struct driver_info sr9800_driver_info = {
836 .description = "CoreChip SR9800 USB 2.0 Ethernet",
837 .bind = sr9800_bind,
838 .status = sr_status,
839 .link_reset = sr9800_link_reset,
840 .reset = sr9800_reset,
841 .flags = DRIVER_FLAG,
842 .rx_fixup = sr_rx_fixup,
843 .tx_fixup = sr_tx_fixup,
846 static const struct usb_device_id products[] = {
848 USB_DEVICE(0x0fe6, 0x9800), /* SR9800 Device */
849 .driver_info = (unsigned long) &sr9800_driver_info,
851 {}, /* END */
854 MODULE_DEVICE_TABLE(usb, products);
856 static struct usb_driver sr_driver = {
857 .name = DRIVER_NAME,
858 .id_table = products,
859 .probe = usbnet_probe,
860 .suspend = usbnet_suspend,
861 .resume = usbnet_resume,
862 .disconnect = usbnet_disconnect,
863 .supports_autosuspend = 1,
866 module_usb_driver(sr_driver);
868 MODULE_AUTHOR("Liu Junliang <liujunliang_ljl@163.com");
869 MODULE_VERSION(DRIVER_VERSION);
870 MODULE_DESCRIPTION("SR9800 USB 2.0 USB2NET Dev : http://www.corechip-sz.com");
871 MODULE_LICENSE("GPL");