net/mlx4_en: Move filters cleanup to a proper location
[linux/fpc-iii.git] / drivers / net / wireless / intel / iwlwifi / dvm / power.c
blob0ad557c895140a72d17637b16cdb41d2be89f0f9
1 /******************************************************************************
3 * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * more details.
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <linuxwifi@intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *****************************************************************************/
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/slab.h>
33 #include <net/mac80211.h>
34 #include "iwl-io.h"
35 #include "iwl-debug.h"
36 #include "iwl-trans.h"
37 #include "iwl-modparams.h"
38 #include "dev.h"
39 #include "agn.h"
40 #include "commands.h"
41 #include "power.h"
43 static bool force_cam = true;
44 module_param(force_cam, bool, 0644);
45 MODULE_PARM_DESC(force_cam, "force continuously aware mode (no power saving at all)");
48 * Setting power level allows the card to go to sleep when not busy.
50 * We calculate a sleep command based on the required latency, which
51 * we get from mac80211. In order to handle thermal throttling, we can
52 * also use pre-defined power levels.
56 * This defines the old power levels. They are still used by default
57 * (level 1) and for thermal throttle (levels 3 through 5)
60 struct iwl_power_vec_entry {
61 struct iwl_powertable_cmd cmd;
62 u8 no_dtim; /* number of skip dtim */
65 #define IWL_DTIM_RANGE_0_MAX 2
66 #define IWL_DTIM_RANGE_1_MAX 10
68 #define NOSLP cpu_to_le16(0), 0, 0
69 #define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
70 #define ASLP (IWL_POWER_POWER_SAVE_ENA_MSK | \
71 IWL_POWER_POWER_MANAGEMENT_ENA_MSK | \
72 IWL_POWER_ADVANCE_PM_ENA_MSK)
73 #define ASLP_TOUT(T) cpu_to_le32(T)
74 #define TU_TO_USEC 1024
75 #define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC)
76 #define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
77 cpu_to_le32(X1), \
78 cpu_to_le32(X2), \
79 cpu_to_le32(X3), \
80 cpu_to_le32(X4)}
81 /* default power management (not Tx power) table values */
82 /* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */
83 /* DTIM 0 - 2 */
84 static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
85 {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 1, 2, 2, 0xFF)}, 0},
86 {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
87 {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
88 {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1},
89 {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2}
93 /* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
94 /* DTIM 3 - 10 */
95 static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
96 {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
97 {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
98 {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
99 {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1},
100 {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 6, 10, 10)}, 2}
103 /* for DTIM period > IWL_DTIM_RANGE_1_MAX */
104 /* DTIM 11 - */
105 static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
106 {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
107 {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
108 {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
109 {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
110 {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
113 /* advance power management */
114 /* DTIM 0 - 2 */
115 static const struct iwl_power_vec_entry apm_range_0[IWL_POWER_NUM] = {
116 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
117 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
118 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
119 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
120 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
121 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
122 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
123 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
124 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
125 SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
129 /* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
130 /* DTIM 3 - 10 */
131 static const struct iwl_power_vec_entry apm_range_1[IWL_POWER_NUM] = {
132 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
133 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
134 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
135 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
136 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
137 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
138 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
139 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
140 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
141 SLP_VEC(1, 2, 6, 8, 0xFF), 0}, 2}
144 /* for DTIM period > IWL_DTIM_RANGE_1_MAX */
145 /* DTIM 11 - */
146 static const struct iwl_power_vec_entry apm_range_2[IWL_POWER_NUM] = {
147 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
148 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
149 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
150 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
151 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
152 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
153 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
154 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
155 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
156 SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
159 static void iwl_static_sleep_cmd(struct iwl_priv *priv,
160 struct iwl_powertable_cmd *cmd,
161 enum iwl_power_level lvl, int period)
163 const struct iwl_power_vec_entry *table;
164 int max_sleep[IWL_POWER_VEC_SIZE] = { 0 };
165 int i;
166 u8 skip;
167 u32 slp_itrvl;
169 if (priv->lib->adv_pm) {
170 table = apm_range_2;
171 if (period <= IWL_DTIM_RANGE_1_MAX)
172 table = apm_range_1;
173 if (period <= IWL_DTIM_RANGE_0_MAX)
174 table = apm_range_0;
175 } else {
176 table = range_2;
177 if (period <= IWL_DTIM_RANGE_1_MAX)
178 table = range_1;
179 if (period <= IWL_DTIM_RANGE_0_MAX)
180 table = range_0;
183 if (WARN_ON(lvl < 0 || lvl >= IWL_POWER_NUM))
184 memset(cmd, 0, sizeof(*cmd));
185 else
186 *cmd = table[lvl].cmd;
188 if (period == 0) {
189 skip = 0;
190 period = 1;
191 for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
192 max_sleep[i] = 1;
194 } else {
195 skip = table[lvl].no_dtim;
196 for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
197 max_sleep[i] = le32_to_cpu(cmd->sleep_interval[i]);
198 max_sleep[IWL_POWER_VEC_SIZE - 1] = skip + 1;
201 slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
202 /* figure out the listen interval based on dtim period and skip */
203 if (slp_itrvl == 0xFF)
204 cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
205 cpu_to_le32(period * (skip + 1));
207 slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
208 if (slp_itrvl > period)
209 cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
210 cpu_to_le32((slp_itrvl / period) * period);
212 if (skip)
213 cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
214 else
215 cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
217 if (priv->cfg->base_params->shadow_reg_enable)
218 cmd->flags |= IWL_POWER_SHADOW_REG_ENA;
219 else
220 cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA;
222 if (iwl_advanced_bt_coexist(priv)) {
223 if (!priv->lib->bt_params->bt_sco_disable)
224 cmd->flags |= IWL_POWER_BT_SCO_ENA;
225 else
226 cmd->flags &= ~IWL_POWER_BT_SCO_ENA;
230 slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
231 if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL)
232 cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
233 cpu_to_le32(IWL_CONN_MAX_LISTEN_INTERVAL);
235 /* enforce max sleep interval */
236 for (i = IWL_POWER_VEC_SIZE - 1; i >= 0 ; i--) {
237 if (le32_to_cpu(cmd->sleep_interval[i]) >
238 (max_sleep[i] * period))
239 cmd->sleep_interval[i] =
240 cpu_to_le32(max_sleep[i] * period);
241 if (i != (IWL_POWER_VEC_SIZE - 1)) {
242 if (le32_to_cpu(cmd->sleep_interval[i]) >
243 le32_to_cpu(cmd->sleep_interval[i+1]))
244 cmd->sleep_interval[i] =
245 cmd->sleep_interval[i+1];
249 if (priv->power_data.bus_pm)
250 cmd->flags |= IWL_POWER_PCI_PM_MSK;
251 else
252 cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
254 IWL_DEBUG_POWER(priv, "numSkipDtim = %u, dtimPeriod = %d\n",
255 skip, period);
256 /* The power level here is 0-4 (used as array index), but user expects
257 to see 1-5 (according to spec). */
258 IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1);
261 static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv,
262 struct iwl_powertable_cmd *cmd)
264 memset(cmd, 0, sizeof(*cmd));
266 if (priv->power_data.bus_pm)
267 cmd->flags |= IWL_POWER_PCI_PM_MSK;
269 IWL_DEBUG_POWER(priv, "Sleep command for CAM\n");
272 static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd)
274 IWL_DEBUG_POWER(priv, "Sending power/sleep command\n");
275 IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags);
276 IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
277 IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
278 IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n",
279 le32_to_cpu(cmd->sleep_interval[0]),
280 le32_to_cpu(cmd->sleep_interval[1]),
281 le32_to_cpu(cmd->sleep_interval[2]),
282 le32_to_cpu(cmd->sleep_interval[3]),
283 le32_to_cpu(cmd->sleep_interval[4]));
285 return iwl_dvm_send_cmd_pdu(priv, POWER_TABLE_CMD, 0,
286 sizeof(struct iwl_powertable_cmd), cmd);
289 static void iwl_power_build_cmd(struct iwl_priv *priv,
290 struct iwl_powertable_cmd *cmd)
292 bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS;
293 int dtimper;
295 if (force_cam) {
296 iwl_power_sleep_cam_cmd(priv, cmd);
297 return;
300 dtimper = priv->hw->conf.ps_dtim_period ?: 1;
302 if (priv->wowlan)
303 iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, dtimper);
304 else if (!priv->lib->no_idle_support &&
305 priv->hw->conf.flags & IEEE80211_CONF_IDLE)
306 iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20);
307 else if (iwl_tt_is_low_power_state(priv)) {
308 /* in thermal throttling low power state */
309 iwl_static_sleep_cmd(priv, cmd,
310 iwl_tt_current_power_mode(priv), dtimper);
311 } else if (!enabled)
312 iwl_power_sleep_cam_cmd(priv, cmd);
313 else if (priv->power_data.debug_sleep_level_override >= 0)
314 iwl_static_sleep_cmd(priv, cmd,
315 priv->power_data.debug_sleep_level_override,
316 dtimper);
317 else {
318 /* Note that the user parameter is 1-5 (according to spec),
319 but we pass 0-4 because it acts as an array index. */
320 if (iwlwifi_mod_params.power_level > IWL_POWER_INDEX_1 &&
321 iwlwifi_mod_params.power_level <= IWL_POWER_NUM)
322 iwl_static_sleep_cmd(priv, cmd,
323 iwlwifi_mod_params.power_level - 1, dtimper);
324 else
325 iwl_static_sleep_cmd(priv, cmd,
326 IWL_POWER_INDEX_1, dtimper);
330 int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
331 bool force)
333 int ret;
334 bool update_chains;
336 lockdep_assert_held(&priv->mutex);
338 /* Don't update the RX chain when chain noise calibration is running */
339 update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
340 priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
342 if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force)
343 return 0;
345 if (!iwl_is_ready_rf(priv))
346 return -EIO;
348 /* scan complete use sleep_power_next, need to be updated */
349 memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd));
350 if (test_bit(STATUS_SCANNING, &priv->status) && !force) {
351 IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n");
352 return 0;
355 if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
356 iwl_dvm_set_pmi(priv, true);
358 ret = iwl_set_power(priv, cmd);
359 if (!ret) {
360 if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
361 iwl_dvm_set_pmi(priv, false);
363 if (update_chains)
364 iwl_update_chain_flags(priv);
365 else
366 IWL_DEBUG_POWER(priv,
367 "Cannot update the power, chain noise "
368 "calibration running: %d\n",
369 priv->chain_noise_data.state);
371 memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd));
372 } else
373 IWL_ERR(priv, "set power fail, ret = %d\n", ret);
375 return ret;
378 int iwl_power_update_mode(struct iwl_priv *priv, bool force)
380 struct iwl_powertable_cmd cmd;
382 iwl_power_build_cmd(priv, &cmd);
383 return iwl_power_set_mode(priv, &cmd, force);
386 /* initialize to default */
387 void iwl_power_initialize(struct iwl_priv *priv)
389 priv->power_data.bus_pm = priv->trans->pm_support;
391 priv->power_data.debug_sleep_level_override = -1;
393 memset(&priv->power_data.sleep_cmd, 0,
394 sizeof(priv->power_data.sleep_cmd));