1 /******************************************************************************
3 * This file is provided under a dual BSD/GPLv2 license. When using or
4 * redistributing this file, you may do so under either license.
8 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
9 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of version 2 of the GNU General Public License as
13 * published by the Free Software Foundation.
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
18 * General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
25 * The full GNU General Public License is included in this distribution
26 * in the file called COPYING.
28 * Contact Information:
29 * Intel Linux Wireless <linuxwifi@intel.com>
30 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
34 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
35 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
36 * All rights reserved.
38 * Redistribution and use in source and binary forms, with or without
39 * modification, are permitted provided that the following conditions
42 * * Redistributions of source code must retain the above copyright
43 * notice, this list of conditions and the following disclaimer.
44 * * Redistributions in binary form must reproduce the above copyright
45 * notice, this list of conditions and the following disclaimer in
46 * the documentation and/or other materials provided with the
48 * * Neither the name Intel Corporation nor the names of its
49 * contributors may be used to endorse or promote products derived
50 * from this software without specific prior written permission.
52 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
53 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
54 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
55 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
56 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
57 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
58 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
59 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
60 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
61 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
62 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
64 *****************************************************************************/
66 #include <net/mac80211.h>
70 /* Maps the driver specific channel width definition to the fw values */
71 u8
iwl_mvm_get_channel_width(struct cfg80211_chan_def
*chandef
)
73 switch (chandef
->width
) {
74 case NL80211_CHAN_WIDTH_20_NOHT
:
75 case NL80211_CHAN_WIDTH_20
:
76 return PHY_VHT_CHANNEL_MODE20
;
77 case NL80211_CHAN_WIDTH_40
:
78 return PHY_VHT_CHANNEL_MODE40
;
79 case NL80211_CHAN_WIDTH_80
:
80 return PHY_VHT_CHANNEL_MODE80
;
81 case NL80211_CHAN_WIDTH_160
:
82 return PHY_VHT_CHANNEL_MODE160
;
84 WARN(1, "Invalid channel width=%u", chandef
->width
);
85 return PHY_VHT_CHANNEL_MODE20
;
90 * Maps the driver specific control channel position (relative to the center
91 * freq) definitions to the the fw values
93 u8
iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def
*chandef
)
95 switch (chandef
->chan
->center_freq
- chandef
->center_freq1
) {
97 return PHY_VHT_CTRL_POS_4_BELOW
;
99 return PHY_VHT_CTRL_POS_3_BELOW
;
101 return PHY_VHT_CTRL_POS_2_BELOW
;
103 return PHY_VHT_CTRL_POS_1_BELOW
;
105 return PHY_VHT_CTRL_POS_1_ABOVE
;
107 return PHY_VHT_CTRL_POS_2_ABOVE
;
109 return PHY_VHT_CTRL_POS_3_ABOVE
;
111 return PHY_VHT_CTRL_POS_4_ABOVE
;
113 WARN(1, "Invalid channel definition");
116 * The FW is expected to check the control channel position only
117 * when in HT/VHT and the channel width is not 20MHz. Return
118 * this value as the default one.
120 return PHY_VHT_CTRL_POS_1_BELOW
;
125 * Construct the generic fields of the PHY context command
127 static void iwl_mvm_phy_ctxt_cmd_hdr(struct iwl_mvm_phy_ctxt
*ctxt
,
128 struct iwl_phy_context_cmd
*cmd
,
129 u32 action
, u32 apply_time
)
131 memset(cmd
, 0, sizeof(struct iwl_phy_context_cmd
));
133 cmd
->id_and_color
= cpu_to_le32(FW_CMD_ID_AND_COLOR(ctxt
->id
,
135 cmd
->action
= cpu_to_le32(action
);
136 cmd
->apply_time
= cpu_to_le32(apply_time
);
140 * Add the phy configuration to the PHY context command
142 static void iwl_mvm_phy_ctxt_cmd_data(struct iwl_mvm
*mvm
,
143 struct iwl_phy_context_cmd
*cmd
,
144 struct cfg80211_chan_def
*chandef
,
145 u8 chains_static
, u8 chains_dynamic
)
147 u8 active_cnt
, idle_cnt
;
149 /* Set the channel info data */
150 cmd
->ci
.band
= (chandef
->chan
->band
== NL80211_BAND_2GHZ
?
151 PHY_BAND_24
: PHY_BAND_5
);
153 cmd
->ci
.channel
= chandef
->chan
->hw_value
;
154 cmd
->ci
.width
= iwl_mvm_get_channel_width(chandef
);
155 cmd
->ci
.ctrl_pos
= iwl_mvm_get_ctrl_pos(chandef
);
157 /* Set rx the chains */
158 idle_cnt
= chains_static
;
159 active_cnt
= chains_dynamic
;
161 /* In scenarios where we only ever use a single-stream rates,
162 * i.e. legacy 11b/g/a associations, single-stream APs or even
163 * static SMPS, enable both chains to get diversity, improving
164 * the case where we're far enough from the AP that attenuation
165 * between the two antennas is sufficiently different to impact
168 if (active_cnt
== 1 && iwl_mvm_rx_diversity_allowed(mvm
)) {
173 cmd
->rxchain_info
= cpu_to_le32(iwl_mvm_get_valid_rx_ant(mvm
) <<
174 PHY_RX_CHAIN_VALID_POS
);
175 cmd
->rxchain_info
|= cpu_to_le32(idle_cnt
<< PHY_RX_CHAIN_CNT_POS
);
176 cmd
->rxchain_info
|= cpu_to_le32(active_cnt
<<
177 PHY_RX_CHAIN_MIMO_CNT_POS
);
178 #ifdef CONFIG_IWLWIFI_DEBUGFS
179 if (unlikely(mvm
->dbgfs_rx_phyinfo
))
180 cmd
->rxchain_info
= cpu_to_le32(mvm
->dbgfs_rx_phyinfo
);
183 cmd
->txchain_info
= cpu_to_le32(iwl_mvm_get_valid_tx_ant(mvm
));
187 * Send a command to apply the current phy configuration. The command is send
188 * only if something in the configuration changed: in case that this is the
189 * first time that the phy configuration is applied or in case that the phy
190 * configuration changed from the previous apply.
192 static int iwl_mvm_phy_ctxt_apply(struct iwl_mvm
*mvm
,
193 struct iwl_mvm_phy_ctxt
*ctxt
,
194 struct cfg80211_chan_def
*chandef
,
195 u8 chains_static
, u8 chains_dynamic
,
196 u32 action
, u32 apply_time
)
198 struct iwl_phy_context_cmd cmd
;
201 /* Set the command header fields */
202 iwl_mvm_phy_ctxt_cmd_hdr(ctxt
, &cmd
, action
, apply_time
);
204 /* Set the command data */
205 iwl_mvm_phy_ctxt_cmd_data(mvm
, &cmd
, chandef
,
206 chains_static
, chains_dynamic
);
208 ret
= iwl_mvm_send_cmd_pdu(mvm
, PHY_CONTEXT_CMD
, 0,
209 sizeof(struct iwl_phy_context_cmd
),
212 IWL_ERR(mvm
, "PHY ctxt cmd error. ret=%d\n", ret
);
217 * Send a command to add a PHY context based on the current HW configuration.
219 int iwl_mvm_phy_ctxt_add(struct iwl_mvm
*mvm
, struct iwl_mvm_phy_ctxt
*ctxt
,
220 struct cfg80211_chan_def
*chandef
,
221 u8 chains_static
, u8 chains_dynamic
)
223 WARN_ON(!test_bit(IWL_MVM_STATUS_IN_HW_RESTART
, &mvm
->status
) &&
225 lockdep_assert_held(&mvm
->mutex
);
227 ctxt
->channel
= chandef
->chan
;
229 return iwl_mvm_phy_ctxt_apply(mvm
, ctxt
, chandef
,
230 chains_static
, chains_dynamic
,
231 FW_CTXT_ACTION_ADD
, 0);
235 * Update the number of references to the given PHY context. This is valid only
236 * in case the PHY context was already created, i.e., its reference count > 0.
238 void iwl_mvm_phy_ctxt_ref(struct iwl_mvm
*mvm
, struct iwl_mvm_phy_ctxt
*ctxt
)
240 lockdep_assert_held(&mvm
->mutex
);
245 * Send a command to modify the PHY context based on the current HW
246 * configuration. Note that the function does not check that the configuration
249 int iwl_mvm_phy_ctxt_changed(struct iwl_mvm
*mvm
, struct iwl_mvm_phy_ctxt
*ctxt
,
250 struct cfg80211_chan_def
*chandef
,
251 u8 chains_static
, u8 chains_dynamic
)
253 lockdep_assert_held(&mvm
->mutex
);
255 ctxt
->channel
= chandef
->chan
;
256 return iwl_mvm_phy_ctxt_apply(mvm
, ctxt
, chandef
,
257 chains_static
, chains_dynamic
,
258 FW_CTXT_ACTION_MODIFY
, 0);
261 void iwl_mvm_phy_ctxt_unref(struct iwl_mvm
*mvm
, struct iwl_mvm_phy_ctxt
*ctxt
)
263 lockdep_assert_held(&mvm
->mutex
);
265 if (WARN_ON_ONCE(!ctxt
))
271 static void iwl_mvm_binding_iterator(void *_data
, u8
*mac
,
272 struct ieee80211_vif
*vif
)
274 unsigned long *data
= _data
;
275 struct iwl_mvm_vif
*mvmvif
= iwl_mvm_vif_from_mac80211(vif
);
277 if (!mvmvif
->phy_ctxt
)
280 if (vif
->type
== NL80211_IFTYPE_STATION
||
281 vif
->type
== NL80211_IFTYPE_AP
)
282 __set_bit(mvmvif
->phy_ctxt
->id
, data
);
285 int iwl_mvm_phy_ctx_count(struct iwl_mvm
*mvm
)
287 unsigned long phy_ctxt_counter
= 0;
289 ieee80211_iterate_active_interfaces_atomic(mvm
->hw
,
290 IEEE80211_IFACE_ITER_NORMAL
,
291 iwl_mvm_binding_iterator
,
294 return hweight8(phy_ctxt_counter
);