ARM: dts: add 'dr_mode' property to hsotg devices for exynos boards
[linux/fpc-iii.git] / drivers / irqchip / irq-metag.c
blobc16c186d97d35f4246fa2acbd17942789922d6d7
1 /*
2 * Meta internal (HWSTATMETA) interrupt code.
4 * Copyright (C) 2011-2012 Imagination Technologies Ltd.
6 * This code is based on the code in SoC/common/irq.c and SoC/comet/irq.c
7 * The code base could be generalised/merged as a lot of the functionality is
8 * similar. Until this is done, we try to keep the code simple here.
9 */
11 #include <linux/interrupt.h>
12 #include <linux/io.h>
13 #include <linux/irqdomain.h>
15 #include <asm/irq.h>
16 #include <asm/hwthread.h>
18 #define PERF0VECINT 0x04820580
19 #define PERF1VECINT 0x04820588
20 #define PERF0TRIG_OFFSET 16
21 #define PERF1TRIG_OFFSET 17
23 /**
24 * struct metag_internal_irq_priv - private meta internal interrupt data
25 * @domain: IRQ domain for all internal Meta IRQs (HWSTATMETA)
26 * @unmasked: Record of unmasked IRQs
28 struct metag_internal_irq_priv {
29 struct irq_domain *domain;
31 unsigned long unmasked;
34 /* Private data for the one and only internal interrupt controller */
35 static struct metag_internal_irq_priv metag_internal_irq_priv;
37 static unsigned int metag_internal_irq_startup(struct irq_data *data);
38 static void metag_internal_irq_shutdown(struct irq_data *data);
39 static void metag_internal_irq_ack(struct irq_data *data);
40 static void metag_internal_irq_mask(struct irq_data *data);
41 static void metag_internal_irq_unmask(struct irq_data *data);
42 #ifdef CONFIG_SMP
43 static int metag_internal_irq_set_affinity(struct irq_data *data,
44 const struct cpumask *cpumask, bool force);
45 #endif
47 static struct irq_chip internal_irq_edge_chip = {
48 .name = "HWSTATMETA-IRQ",
49 .irq_startup = metag_internal_irq_startup,
50 .irq_shutdown = metag_internal_irq_shutdown,
51 .irq_ack = metag_internal_irq_ack,
52 .irq_mask = metag_internal_irq_mask,
53 .irq_unmask = metag_internal_irq_unmask,
54 #ifdef CONFIG_SMP
55 .irq_set_affinity = metag_internal_irq_set_affinity,
56 #endif
60 * metag_hwvec_addr - get the address of *VECINT regs of irq
62 * This function is a table of supported triggers on HWSTATMETA
63 * Could do with a structure, but better keep it simple. Changes
64 * in this code should be rare.
66 static inline void __iomem *metag_hwvec_addr(irq_hw_number_t hw)
68 void __iomem *addr;
70 switch (hw) {
71 case PERF0TRIG_OFFSET:
72 addr = (void __iomem *)PERF0VECINT;
73 break;
74 case PERF1TRIG_OFFSET:
75 addr = (void __iomem *)PERF1VECINT;
76 break;
77 default:
78 addr = NULL;
79 break;
81 return addr;
85 * metag_internal_startup - setup an internal irq
86 * @irq: the irq to startup
88 * Multiplex interrupts for @irq onto TR1. Clear any pending
89 * interrupts.
91 static unsigned int metag_internal_irq_startup(struct irq_data *data)
93 /* Clear (toggle) the bit in HWSTATMETA for our interrupt. */
94 metag_internal_irq_ack(data);
96 /* Enable the interrupt by unmasking it */
97 metag_internal_irq_unmask(data);
99 return 0;
103 * metag_internal_irq_shutdown - turn off the irq
104 * @irq: the irq number to turn off
106 * Mask @irq and clear any pending interrupts.
107 * Stop muxing @irq onto TR1.
109 static void metag_internal_irq_shutdown(struct irq_data *data)
111 /* Disable the IRQ at the core by masking it. */
112 metag_internal_irq_mask(data);
114 /* Clear (toggle) the bit in HWSTATMETA for our interrupt. */
115 metag_internal_irq_ack(data);
119 * metag_internal_irq_ack - acknowledge irq
120 * @irq: the irq to ack
122 static void metag_internal_irq_ack(struct irq_data *data)
124 irq_hw_number_t hw = data->hwirq;
125 unsigned int bit = 1 << hw;
127 if (metag_in32(HWSTATMETA) & bit)
128 metag_out32(bit, HWSTATMETA);
132 * metag_internal_irq_mask() - mask an internal irq by unvectoring
133 * @data: data for the internal irq to mask
135 * HWSTATMETA has no mask register. Instead the IRQ is unvectored from the core
136 * and retriggered if necessary later.
138 static void metag_internal_irq_mask(struct irq_data *data)
140 struct metag_internal_irq_priv *priv = &metag_internal_irq_priv;
141 irq_hw_number_t hw = data->hwirq;
142 void __iomem *vec_addr = metag_hwvec_addr(hw);
144 clear_bit(hw, &priv->unmasked);
146 /* there is no interrupt mask, so unvector the interrupt */
147 metag_out32(0, vec_addr);
151 * meta_intc_unmask_edge_irq_nomask() - unmask an edge irq by revectoring
152 * @data: data for the internal irq to unmask
154 * HWSTATMETA has no mask register. Instead the IRQ is revectored back to the
155 * core and retriggered if necessary.
157 static void metag_internal_irq_unmask(struct irq_data *data)
159 struct metag_internal_irq_priv *priv = &metag_internal_irq_priv;
160 irq_hw_number_t hw = data->hwirq;
161 unsigned int bit = 1 << hw;
162 void __iomem *vec_addr = metag_hwvec_addr(hw);
163 unsigned int thread = hard_processor_id();
165 set_bit(hw, &priv->unmasked);
167 /* there is no interrupt mask, so revector the interrupt */
168 metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR1(thread)), vec_addr);
171 * Re-trigger interrupt
173 * Writing a 1 toggles, and a 0->1 transition triggers. We only
174 * retrigger if the status bit is already set, which means we
175 * need to clear it first. Retriggering is fundamentally racy
176 * because if the interrupt fires again after we clear it we
177 * could end up clearing it again and the interrupt handler
178 * thinking it hasn't fired. Therefore we need to keep trying to
179 * retrigger until the bit is set.
181 if (metag_in32(HWSTATMETA) & bit) {
182 metag_out32(bit, HWSTATMETA);
183 while (!(metag_in32(HWSTATMETA) & bit))
184 metag_out32(bit, HWSTATMETA);
188 #ifdef CONFIG_SMP
190 * metag_internal_irq_set_affinity - set the affinity for an interrupt
192 static int metag_internal_irq_set_affinity(struct irq_data *data,
193 const struct cpumask *cpumask, bool force)
195 unsigned int cpu, thread;
196 irq_hw_number_t hw = data->hwirq;
198 * Wire up this interrupt from *VECINT to the Meta core.
200 * Note that we can't wire up *VECINT to interrupt more than
201 * one cpu (the interrupt code doesn't support it), so we just
202 * pick the first cpu we find in 'cpumask'.
204 cpu = cpumask_any_and(cpumask, cpu_online_mask);
205 thread = cpu_2_hwthread_id[cpu];
207 metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR1(thread)),
208 metag_hwvec_addr(hw));
210 return 0;
212 #endif
215 * metag_internal_irq_demux - irq de-multiplexer
216 * @irq: the interrupt number
217 * @desc: the interrupt description structure for this irq
219 * The cpu receives an interrupt on TR1 when an interrupt has
220 * occurred. It is this function's job to demux this irq and
221 * figure out exactly which trigger needs servicing.
223 static void metag_internal_irq_demux(unsigned int irq, struct irq_desc *desc)
225 struct metag_internal_irq_priv *priv = irq_desc_get_handler_data(desc);
226 irq_hw_number_t hw;
227 unsigned int irq_no;
228 u32 status;
230 recalculate:
231 status = metag_in32(HWSTATMETA) & priv->unmasked;
233 for (hw = 0; status != 0; status >>= 1, ++hw) {
234 if (status & 0x1) {
236 * Map the hardware IRQ number to a virtual Linux IRQ
237 * number.
239 irq_no = irq_linear_revmap(priv->domain, hw);
242 * Only fire off interrupts that are
243 * registered to be handled by the kernel.
244 * Other interrupts are probably being
245 * handled by other Meta hardware threads.
247 generic_handle_irq(irq_no);
250 * The handler may have re-enabled interrupts
251 * which could have caused a nested invocation
252 * of this code and make the copy of the
253 * status register we are using invalid.
255 goto recalculate;
261 * internal_irq_map() - Map an internal meta IRQ to a virtual IRQ number.
262 * @hw: Number of the internal IRQ. Must be in range.
264 * Returns: The virtual IRQ number of the Meta internal IRQ specified by
265 * @hw.
267 int internal_irq_map(unsigned int hw)
269 struct metag_internal_irq_priv *priv = &metag_internal_irq_priv;
270 if (!priv->domain)
271 return -ENODEV;
272 return irq_create_mapping(priv->domain, hw);
276 * metag_internal_irq_init_cpu - regsister with the Meta cpu
277 * @cpu: the CPU to register on
279 * Configure @cpu's TR1 irq so that we can demux irqs.
281 static void metag_internal_irq_init_cpu(struct metag_internal_irq_priv *priv,
282 int cpu)
284 unsigned int thread = cpu_2_hwthread_id[cpu];
285 unsigned int signum = TBID_SIGNUM_TR1(thread);
286 int irq = tbisig_map(signum);
288 /* Register the multiplexed IRQ handler */
289 irq_set_handler_data(irq, priv);
290 irq_set_chained_handler(irq, metag_internal_irq_demux);
291 irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
295 * metag_internal_intc_map() - map an internal irq
296 * @d: irq domain of internal trigger block
297 * @irq: virtual irq number
298 * @hw: hardware irq number within internal trigger block
300 * This sets up a virtual irq for a specified hardware interrupt. The irq chip
301 * and handler is configured.
303 static int metag_internal_intc_map(struct irq_domain *d, unsigned int irq,
304 irq_hw_number_t hw)
306 /* only register interrupt if it is mapped */
307 if (!metag_hwvec_addr(hw))
308 return -EINVAL;
310 irq_set_chip_and_handler(irq, &internal_irq_edge_chip,
311 handle_edge_irq);
312 return 0;
315 static const struct irq_domain_ops metag_internal_intc_domain_ops = {
316 .map = metag_internal_intc_map,
320 * metag_internal_irq_register - register internal IRQs
322 * Register the irq chip and handler function for all internal IRQs
324 int __init init_internal_IRQ(void)
326 struct metag_internal_irq_priv *priv = &metag_internal_irq_priv;
327 unsigned int cpu;
329 /* Set up an IRQ domain */
330 priv->domain = irq_domain_add_linear(NULL, 32,
331 &metag_internal_intc_domain_ops,
332 priv);
333 if (unlikely(!priv->domain)) {
334 pr_err("meta-internal-intc: cannot add IRQ domain\n");
335 return -ENOMEM;
338 /* Setup TR1 for all cpus. */
339 for_each_possible_cpu(cpu)
340 metag_internal_irq_init_cpu(priv, cpu);
342 return 0;