ARM: dts: add 'dr_mode' property to hsotg devices for exynos boards
[linux/fpc-iii.git] / drivers / mfd / wm8400-core.c
blobc6fb5d16ca09590c04f5e1f032e104d791a92ee7
1 /*
2 * Core driver for WM8400.
4 * Copyright 2008 Wolfson Microelectronics PLC.
6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of the
11 * License, or (at your option) any later version.
15 #include <linux/module.h>
16 #include <linux/bug.h>
17 #include <linux/err.h>
18 #include <linux/i2c.h>
19 #include <linux/kernel.h>
20 #include <linux/mfd/core.h>
21 #include <linux/mfd/wm8400-private.h>
22 #include <linux/mfd/wm8400-audio.h>
23 #include <linux/regmap.h>
24 #include <linux/slab.h>
26 static bool wm8400_volatile(struct device *dev, unsigned int reg)
28 switch (reg) {
29 case WM8400_INTERRUPT_STATUS_1:
30 case WM8400_INTERRUPT_LEVELS:
31 case WM8400_SHUTDOWN_REASON:
32 return true;
33 default:
34 return false;
38 /**
39 * wm8400_reg_read - Single register read
41 * @wm8400: Pointer to wm8400 control structure
42 * @reg: Register to read
44 * @return Read value
46 u16 wm8400_reg_read(struct wm8400 *wm8400, u8 reg)
48 unsigned int val;
49 int ret;
51 ret = regmap_read(wm8400->regmap, reg, &val);
52 if (ret < 0)
53 return ret;
55 return val;
57 EXPORT_SYMBOL_GPL(wm8400_reg_read);
59 int wm8400_block_read(struct wm8400 *wm8400, u8 reg, int count, u16 *data)
61 return regmap_bulk_read(wm8400->regmap, reg, data, count);
63 EXPORT_SYMBOL_GPL(wm8400_block_read);
65 static int wm8400_register_codec(struct wm8400 *wm8400)
67 const struct mfd_cell cell = {
68 .name = "wm8400-codec",
69 .platform_data = wm8400,
70 .pdata_size = sizeof(*wm8400),
73 return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0, NULL);
77 * wm8400_init - Generic initialisation
79 * The WM8400 can be configured as either an I2C or SPI device. Probe
80 * functions for each bus set up the accessors then call into this to
81 * set up the device itself.
83 static int wm8400_init(struct wm8400 *wm8400,
84 struct wm8400_platform_data *pdata)
86 unsigned int reg;
87 int ret;
89 dev_set_drvdata(wm8400->dev, wm8400);
91 /* Check that this is actually a WM8400 */
92 ret = regmap_read(wm8400->regmap, WM8400_RESET_ID, &reg);
93 if (ret != 0) {
94 dev_err(wm8400->dev, "Chip ID register read failed\n");
95 return -EIO;
97 if (reg != 0x6172) {
98 dev_err(wm8400->dev, "Device is not a WM8400, ID is %x\n",
99 reg);
100 return -ENODEV;
103 ret = regmap_read(wm8400->regmap, WM8400_ID, &reg);
104 if (ret != 0) {
105 dev_err(wm8400->dev, "ID register read failed: %d\n", ret);
106 return ret;
108 reg = (reg & WM8400_CHIP_REV_MASK) >> WM8400_CHIP_REV_SHIFT;
109 dev_info(wm8400->dev, "WM8400 revision %x\n", reg);
111 ret = wm8400_register_codec(wm8400);
112 if (ret != 0) {
113 dev_err(wm8400->dev, "Failed to register codec\n");
114 goto err_children;
117 if (pdata && pdata->platform_init) {
118 ret = pdata->platform_init(wm8400->dev);
119 if (ret != 0) {
120 dev_err(wm8400->dev, "Platform init failed: %d\n",
121 ret);
122 goto err_children;
124 } else
125 dev_warn(wm8400->dev, "No platform initialisation supplied\n");
127 return 0;
129 err_children:
130 mfd_remove_devices(wm8400->dev);
131 return ret;
134 static void wm8400_release(struct wm8400 *wm8400)
136 mfd_remove_devices(wm8400->dev);
139 static const struct regmap_config wm8400_regmap_config = {
140 .reg_bits = 8,
141 .val_bits = 16,
142 .max_register = WM8400_REGISTER_COUNT - 1,
144 .volatile_reg = wm8400_volatile,
146 .cache_type = REGCACHE_RBTREE,
150 * wm8400_reset_codec_reg_cache - Reset cached codec registers to
151 * their default values.
153 void wm8400_reset_codec_reg_cache(struct wm8400 *wm8400)
155 regmap_reinit_cache(wm8400->regmap, &wm8400_regmap_config);
157 EXPORT_SYMBOL_GPL(wm8400_reset_codec_reg_cache);
159 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
160 static int wm8400_i2c_probe(struct i2c_client *i2c,
161 const struct i2c_device_id *id)
163 struct wm8400 *wm8400;
165 wm8400 = devm_kzalloc(&i2c->dev, sizeof(struct wm8400), GFP_KERNEL);
166 if (!wm8400)
167 return -ENOMEM;
169 wm8400->regmap = devm_regmap_init_i2c(i2c, &wm8400_regmap_config);
170 if (IS_ERR(wm8400->regmap))
171 return PTR_ERR(wm8400->regmap);
173 wm8400->dev = &i2c->dev;
174 i2c_set_clientdata(i2c, wm8400);
176 return wm8400_init(wm8400, dev_get_platdata(&i2c->dev));
179 static int wm8400_i2c_remove(struct i2c_client *i2c)
181 struct wm8400 *wm8400 = i2c_get_clientdata(i2c);
183 wm8400_release(wm8400);
185 return 0;
188 static const struct i2c_device_id wm8400_i2c_id[] = {
189 { "wm8400", 0 },
192 MODULE_DEVICE_TABLE(i2c, wm8400_i2c_id);
194 static struct i2c_driver wm8400_i2c_driver = {
195 .driver = {
196 .name = "WM8400",
197 .owner = THIS_MODULE,
199 .probe = wm8400_i2c_probe,
200 .remove = wm8400_i2c_remove,
201 .id_table = wm8400_i2c_id,
203 #endif
205 static int __init wm8400_module_init(void)
207 int ret = -ENODEV;
209 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
210 ret = i2c_add_driver(&wm8400_i2c_driver);
211 if (ret != 0)
212 pr_err("Failed to register I2C driver: %d\n", ret);
213 #endif
215 return ret;
217 subsys_initcall(wm8400_module_init);
219 static void __exit wm8400_module_exit(void)
221 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
222 i2c_del_driver(&wm8400_i2c_driver);
223 #endif
225 module_exit(wm8400_module_exit);
227 MODULE_LICENSE("GPL");
228 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");