perf bench futex: Cache align the worker struct
[linux/fpc-iii.git] / drivers / hwmon / ads1015.c
blob2b3105c8aed399f8ce9cd3df03d6a265378131fc
1 /*
2 * ads1015.c - lm_sensors driver for ads1015 12-bit 4-input ADC
3 * (C) Copyright 2010
4 * Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
6 * Based on the ads7828 driver by Steve Hardy.
8 * Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads1015.pdf
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <linux/module.h>
26 #include <linux/init.h>
27 #include <linux/slab.h>
28 #include <linux/delay.h>
29 #include <linux/i2c.h>
30 #include <linux/hwmon.h>
31 #include <linux/hwmon-sysfs.h>
32 #include <linux/err.h>
33 #include <linux/mutex.h>
34 #include <linux/of.h>
36 #include <linux/i2c/ads1015.h>
38 /* ADS1015 registers */
39 enum {
40 ADS1015_CONVERSION = 0,
41 ADS1015_CONFIG = 1,
44 /* PGA fullscale voltages in mV */
45 static const unsigned int fullscale_table[8] = {
46 6144, 4096, 2048, 1024, 512, 256, 256, 256 };
48 /* Data rates in samples per second */
49 static const unsigned int data_rate_table_1015[8] = {
50 128, 250, 490, 920, 1600, 2400, 3300, 3300
53 static const unsigned int data_rate_table_1115[8] = {
54 8, 16, 32, 64, 128, 250, 475, 860
57 #define ADS1015_DEFAULT_CHANNELS 0xff
58 #define ADS1015_DEFAULT_PGA 2
59 #define ADS1015_DEFAULT_DATA_RATE 4
61 enum ads1015_chips {
62 ads1015,
63 ads1115,
66 struct ads1015_data {
67 struct device *hwmon_dev;
68 struct mutex update_lock; /* mutex protect updates */
69 struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
70 enum ads1015_chips id;
73 static int ads1015_read_adc(struct i2c_client *client, unsigned int channel)
75 u16 config;
76 struct ads1015_data *data = i2c_get_clientdata(client);
77 unsigned int pga = data->channel_data[channel].pga;
78 unsigned int data_rate = data->channel_data[channel].data_rate;
79 unsigned int conversion_time_ms;
80 const unsigned int * const rate_table = data->id == ads1115 ?
81 data_rate_table_1115 : data_rate_table_1015;
82 int res;
84 mutex_lock(&data->update_lock);
86 /* get channel parameters */
87 res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG);
88 if (res < 0)
89 goto err_unlock;
90 config = res;
91 conversion_time_ms = DIV_ROUND_UP(1000, rate_table[data_rate]);
93 /* setup and start single conversion */
94 config &= 0x001f;
95 config |= (1 << 15) | (1 << 8);
96 config |= (channel & 0x0007) << 12;
97 config |= (pga & 0x0007) << 9;
98 config |= (data_rate & 0x0007) << 5;
100 res = i2c_smbus_write_word_swapped(client, ADS1015_CONFIG, config);
101 if (res < 0)
102 goto err_unlock;
104 /* wait until conversion finished */
105 msleep(conversion_time_ms);
106 res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG);
107 if (res < 0)
108 goto err_unlock;
109 config = res;
110 if (!(config & (1 << 15))) {
111 /* conversion not finished in time */
112 res = -EIO;
113 goto err_unlock;
116 res = i2c_smbus_read_word_swapped(client, ADS1015_CONVERSION);
118 err_unlock:
119 mutex_unlock(&data->update_lock);
120 return res;
123 static int ads1015_reg_to_mv(struct i2c_client *client, unsigned int channel,
124 s16 reg)
126 struct ads1015_data *data = i2c_get_clientdata(client);
127 unsigned int pga = data->channel_data[channel].pga;
128 int fullscale = fullscale_table[pga];
129 const int mask = data->id == ads1115 ? 0x7fff : 0x7ff0;
131 return DIV_ROUND_CLOSEST(reg * fullscale, mask);
134 /* sysfs callback function */
135 static ssize_t show_in(struct device *dev, struct device_attribute *da,
136 char *buf)
138 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
139 struct i2c_client *client = to_i2c_client(dev);
140 int res;
141 int index = attr->index;
143 res = ads1015_read_adc(client, index);
144 if (res < 0)
145 return res;
147 return sprintf(buf, "%d\n", ads1015_reg_to_mv(client, index, res));
150 static const struct sensor_device_attribute ads1015_in[] = {
151 SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0),
152 SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1),
153 SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2),
154 SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3),
155 SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4),
156 SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5),
157 SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6),
158 SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7),
162 * Driver interface
165 static int ads1015_remove(struct i2c_client *client)
167 struct ads1015_data *data = i2c_get_clientdata(client);
168 int k;
170 hwmon_device_unregister(data->hwmon_dev);
171 for (k = 0; k < ADS1015_CHANNELS; ++k)
172 device_remove_file(&client->dev, &ads1015_in[k].dev_attr);
173 return 0;
176 #ifdef CONFIG_OF
177 static int ads1015_get_channels_config_of(struct i2c_client *client)
179 struct ads1015_data *data = i2c_get_clientdata(client);
180 struct device_node *node;
182 if (!client->dev.of_node
183 || !of_get_next_child(client->dev.of_node, NULL))
184 return -EINVAL;
186 for_each_child_of_node(client->dev.of_node, node) {
187 u32 pval;
188 unsigned int channel;
189 unsigned int pga = ADS1015_DEFAULT_PGA;
190 unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE;
192 if (of_property_read_u32(node, "reg", &pval)) {
193 dev_err(&client->dev, "invalid reg on %s\n",
194 node->full_name);
195 continue;
198 channel = pval;
199 if (channel >= ADS1015_CHANNELS) {
200 dev_err(&client->dev,
201 "invalid channel index %d on %s\n",
202 channel, node->full_name);
203 continue;
206 if (!of_property_read_u32(node, "ti,gain", &pval)) {
207 pga = pval;
208 if (pga > 6) {
209 dev_err(&client->dev, "invalid gain on %s\n",
210 node->full_name);
211 return -EINVAL;
215 if (!of_property_read_u32(node, "ti,datarate", &pval)) {
216 data_rate = pval;
217 if (data_rate > 7) {
218 dev_err(&client->dev,
219 "invalid data_rate on %s\n",
220 node->full_name);
221 return -EINVAL;
225 data->channel_data[channel].enabled = true;
226 data->channel_data[channel].pga = pga;
227 data->channel_data[channel].data_rate = data_rate;
230 return 0;
232 #endif
234 static void ads1015_get_channels_config(struct i2c_client *client)
236 unsigned int k;
237 struct ads1015_data *data = i2c_get_clientdata(client);
238 struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev);
240 /* prefer platform data */
241 if (pdata) {
242 memcpy(data->channel_data, pdata->channel_data,
243 sizeof(data->channel_data));
244 return;
247 #ifdef CONFIG_OF
248 if (!ads1015_get_channels_config_of(client))
249 return;
250 #endif
252 /* fallback on default configuration */
253 for (k = 0; k < ADS1015_CHANNELS; ++k) {
254 data->channel_data[k].enabled = true;
255 data->channel_data[k].pga = ADS1015_DEFAULT_PGA;
256 data->channel_data[k].data_rate = ADS1015_DEFAULT_DATA_RATE;
260 static int ads1015_probe(struct i2c_client *client,
261 const struct i2c_device_id *id)
263 struct ads1015_data *data;
264 int err;
265 unsigned int k;
267 data = devm_kzalloc(&client->dev, sizeof(struct ads1015_data),
268 GFP_KERNEL);
269 if (!data)
270 return -ENOMEM;
271 data->id = id->driver_data;
272 i2c_set_clientdata(client, data);
273 mutex_init(&data->update_lock);
275 /* build sysfs attribute group */
276 ads1015_get_channels_config(client);
277 for (k = 0; k < ADS1015_CHANNELS; ++k) {
278 if (!data->channel_data[k].enabled)
279 continue;
280 err = device_create_file(&client->dev, &ads1015_in[k].dev_attr);
281 if (err)
282 goto exit_remove;
285 data->hwmon_dev = hwmon_device_register(&client->dev);
286 if (IS_ERR(data->hwmon_dev)) {
287 err = PTR_ERR(data->hwmon_dev);
288 goto exit_remove;
291 return 0;
293 exit_remove:
294 for (k = 0; k < ADS1015_CHANNELS; ++k)
295 device_remove_file(&client->dev, &ads1015_in[k].dev_attr);
296 return err;
299 static const struct i2c_device_id ads1015_id[] = {
300 { "ads1015", ads1015},
301 { "ads1115", ads1115},
304 MODULE_DEVICE_TABLE(i2c, ads1015_id);
306 static struct i2c_driver ads1015_driver = {
307 .driver = {
308 .name = "ads1015",
310 .probe = ads1015_probe,
311 .remove = ads1015_remove,
312 .id_table = ads1015_id,
315 module_i2c_driver(ads1015_driver);
317 MODULE_AUTHOR("Dirk Eibach <eibach@gdsys.de>");
318 MODULE_DESCRIPTION("ADS1015 driver");
319 MODULE_LICENSE("GPL");