perf bench futex: Cache align the worker struct
[linux/fpc-iii.git] / drivers / spi / spi-bcm-qspi.c
blob14f9dea3173fc5fd9298c7188bf836a3a95f383d
1 /*
2 * Driver for Broadcom BRCMSTB, NSP, NS2, Cygnus SPI Controllers
4 * Copyright 2016 Broadcom
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License, version 2, as
8 * published by the Free Software Foundation (the "GPL").
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * General Public License version 2 (GPLv2) for more details.
15 * You should have received a copy of the GNU General Public License
16 * version 2 (GPLv2) along with this source code.
19 #include <linux/clk.h>
20 #include <linux/delay.h>
21 #include <linux/device.h>
22 #include <linux/init.h>
23 #include <linux/interrupt.h>
24 #include <linux/io.h>
25 #include <linux/ioport.h>
26 #include <linux/kernel.h>
27 #include <linux/module.h>
28 #include <linux/mtd/spi-nor.h>
29 #include <linux/of.h>
30 #include <linux/of_irq.h>
31 #include <linux/platform_device.h>
32 #include <linux/slab.h>
33 #include <linux/spi/spi.h>
34 #include <linux/sysfs.h>
35 #include <linux/types.h>
36 #include "spi-bcm-qspi.h"
38 #define DRIVER_NAME "bcm_qspi"
41 /* BSPI register offsets */
42 #define BSPI_REVISION_ID 0x000
43 #define BSPI_SCRATCH 0x004
44 #define BSPI_MAST_N_BOOT_CTRL 0x008
45 #define BSPI_BUSY_STATUS 0x00c
46 #define BSPI_INTR_STATUS 0x010
47 #define BSPI_B0_STATUS 0x014
48 #define BSPI_B0_CTRL 0x018
49 #define BSPI_B1_STATUS 0x01c
50 #define BSPI_B1_CTRL 0x020
51 #define BSPI_STRAP_OVERRIDE_CTRL 0x024
52 #define BSPI_FLEX_MODE_ENABLE 0x028
53 #define BSPI_BITS_PER_CYCLE 0x02c
54 #define BSPI_BITS_PER_PHASE 0x030
55 #define BSPI_CMD_AND_MODE_BYTE 0x034
56 #define BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038
57 #define BSPI_BSPI_XOR_VALUE 0x03c
58 #define BSPI_BSPI_XOR_ENABLE 0x040
59 #define BSPI_BSPI_PIO_MODE_ENABLE 0x044
60 #define BSPI_BSPI_PIO_IODIR 0x048
61 #define BSPI_BSPI_PIO_DATA 0x04c
63 /* RAF register offsets */
64 #define BSPI_RAF_START_ADDR 0x100
65 #define BSPI_RAF_NUM_WORDS 0x104
66 #define BSPI_RAF_CTRL 0x108
67 #define BSPI_RAF_FULLNESS 0x10c
68 #define BSPI_RAF_WATERMARK 0x110
69 #define BSPI_RAF_STATUS 0x114
70 #define BSPI_RAF_READ_DATA 0x118
71 #define BSPI_RAF_WORD_CNT 0x11c
72 #define BSPI_RAF_CURR_ADDR 0x120
74 /* Override mode masks */
75 #define BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE BIT(0)
76 #define BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL BIT(1)
77 #define BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE BIT(2)
78 #define BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD BIT(3)
79 #define BSPI_STRAP_OVERRIDE_CTRL_ENDAIN_MODE BIT(4)
81 #define BSPI_ADDRLEN_3BYTES 3
82 #define BSPI_ADDRLEN_4BYTES 4
84 #define BSPI_RAF_STATUS_FIFO_EMPTY_MASK BIT(1)
86 #define BSPI_RAF_CTRL_START_MASK BIT(0)
87 #define BSPI_RAF_CTRL_CLEAR_MASK BIT(1)
89 #define BSPI_BPP_MODE_SELECT_MASK BIT(8)
90 #define BSPI_BPP_ADDR_SELECT_MASK BIT(16)
92 #define BSPI_READ_LENGTH 256
94 /* MSPI register offsets */
95 #define MSPI_SPCR0_LSB 0x000
96 #define MSPI_SPCR0_MSB 0x004
97 #define MSPI_SPCR1_LSB 0x008
98 #define MSPI_SPCR1_MSB 0x00c
99 #define MSPI_NEWQP 0x010
100 #define MSPI_ENDQP 0x014
101 #define MSPI_SPCR2 0x018
102 #define MSPI_MSPI_STATUS 0x020
103 #define MSPI_CPTQP 0x024
104 #define MSPI_SPCR3 0x028
105 #define MSPI_TXRAM 0x040
106 #define MSPI_RXRAM 0x0c0
107 #define MSPI_CDRAM 0x140
108 #define MSPI_WRITE_LOCK 0x180
110 #define MSPI_MASTER_BIT BIT(7)
112 #define MSPI_NUM_CDRAM 16
113 #define MSPI_CDRAM_CONT_BIT BIT(7)
114 #define MSPI_CDRAM_BITSE_BIT BIT(6)
115 #define MSPI_CDRAM_PCS 0xf
117 #define MSPI_SPCR2_SPE BIT(6)
118 #define MSPI_SPCR2_CONT_AFTER_CMD BIT(7)
120 #define MSPI_MSPI_STATUS_SPIF BIT(0)
122 #define INTR_BASE_BIT_SHIFT 0x02
123 #define INTR_COUNT 0x07
125 #define NUM_CHIPSELECT 4
126 #define QSPI_SPBR_MIN 8U
127 #define QSPI_SPBR_MAX 255U
129 #define OPCODE_DIOR 0xBB
130 #define OPCODE_QIOR 0xEB
131 #define OPCODE_DIOR_4B 0xBC
132 #define OPCODE_QIOR_4B 0xEC
134 #define MAX_CMD_SIZE 6
136 #define ADDR_4MB_MASK GENMASK(22, 0)
138 /* stop at end of transfer, no other reason */
139 #define TRANS_STATUS_BREAK_NONE 0
140 /* stop at end of spi_message */
141 #define TRANS_STATUS_BREAK_EOM 1
142 /* stop at end of spi_transfer if delay */
143 #define TRANS_STATUS_BREAK_DELAY 2
144 /* stop at end of spi_transfer if cs_change */
145 #define TRANS_STATUS_BREAK_CS_CHANGE 4
146 /* stop if we run out of bytes */
147 #define TRANS_STATUS_BREAK_NO_BYTES 8
149 /* events that make us stop filling TX slots */
150 #define TRANS_STATUS_BREAK_TX (TRANS_STATUS_BREAK_EOM | \
151 TRANS_STATUS_BREAK_DELAY | \
152 TRANS_STATUS_BREAK_CS_CHANGE)
154 /* events that make us deassert CS */
155 #define TRANS_STATUS_BREAK_DESELECT (TRANS_STATUS_BREAK_EOM | \
156 TRANS_STATUS_BREAK_CS_CHANGE)
158 struct bcm_qspi_parms {
159 u32 speed_hz;
160 u8 mode;
161 u8 bits_per_word;
164 struct bcm_xfer_mode {
165 bool flex_mode;
166 unsigned int width;
167 unsigned int addrlen;
168 unsigned int hp;
171 enum base_type {
172 MSPI,
173 BSPI,
174 CHIP_SELECT,
175 BASEMAX,
178 enum irq_source {
179 SINGLE_L2,
180 MUXED_L1,
183 struct bcm_qspi_irq {
184 const char *irq_name;
185 const irq_handler_t irq_handler;
186 int irq_source;
187 u32 mask;
190 struct bcm_qspi_dev_id {
191 const struct bcm_qspi_irq *irqp;
192 void *dev;
195 struct qspi_trans {
196 struct spi_transfer *trans;
197 int byte;
200 struct bcm_qspi {
201 struct platform_device *pdev;
202 struct spi_master *master;
203 struct clk *clk;
204 u32 base_clk;
205 u32 max_speed_hz;
206 void __iomem *base[BASEMAX];
208 /* Some SoCs provide custom interrupt status register(s) */
209 struct bcm_qspi_soc_intc *soc_intc;
211 struct bcm_qspi_parms last_parms;
212 struct qspi_trans trans_pos;
213 int curr_cs;
214 int bspi_maj_rev;
215 int bspi_min_rev;
216 int bspi_enabled;
217 struct spi_flash_read_message *bspi_rf_msg;
218 u32 bspi_rf_msg_idx;
219 u32 bspi_rf_msg_len;
220 u32 bspi_rf_msg_status;
221 struct bcm_xfer_mode xfer_mode;
222 u32 s3_strap_override_ctrl;
223 bool bspi_mode;
224 bool big_endian;
225 int num_irqs;
226 struct bcm_qspi_dev_id *dev_ids;
227 struct completion mspi_done;
228 struct completion bspi_done;
231 static inline bool has_bspi(struct bcm_qspi *qspi)
233 return qspi->bspi_mode;
236 /* Read qspi controller register*/
237 static inline u32 bcm_qspi_read(struct bcm_qspi *qspi, enum base_type type,
238 unsigned int offset)
240 return bcm_qspi_readl(qspi->big_endian, qspi->base[type] + offset);
243 /* Write qspi controller register*/
244 static inline void bcm_qspi_write(struct bcm_qspi *qspi, enum base_type type,
245 unsigned int offset, unsigned int data)
247 bcm_qspi_writel(qspi->big_endian, data, qspi->base[type] + offset);
250 /* BSPI helpers */
251 static int bcm_qspi_bspi_busy_poll(struct bcm_qspi *qspi)
253 int i;
255 /* this should normally finish within 10us */
256 for (i = 0; i < 1000; i++) {
257 if (!(bcm_qspi_read(qspi, BSPI, BSPI_BUSY_STATUS) & 1))
258 return 0;
259 udelay(1);
261 dev_warn(&qspi->pdev->dev, "timeout waiting for !busy_status\n");
262 return -EIO;
265 static inline bool bcm_qspi_bspi_ver_three(struct bcm_qspi *qspi)
267 if (qspi->bspi_maj_rev < 4)
268 return true;
269 return false;
272 static void bcm_qspi_bspi_flush_prefetch_buffers(struct bcm_qspi *qspi)
274 bcm_qspi_bspi_busy_poll(qspi);
275 /* Force rising edge for the b0/b1 'flush' field */
276 bcm_qspi_write(qspi, BSPI, BSPI_B0_CTRL, 1);
277 bcm_qspi_write(qspi, BSPI, BSPI_B1_CTRL, 1);
278 bcm_qspi_write(qspi, BSPI, BSPI_B0_CTRL, 0);
279 bcm_qspi_write(qspi, BSPI, BSPI_B1_CTRL, 0);
282 static int bcm_qspi_bspi_lr_is_fifo_empty(struct bcm_qspi *qspi)
284 return (bcm_qspi_read(qspi, BSPI, BSPI_RAF_STATUS) &
285 BSPI_RAF_STATUS_FIFO_EMPTY_MASK);
288 static inline u32 bcm_qspi_bspi_lr_read_fifo(struct bcm_qspi *qspi)
290 u32 data = bcm_qspi_read(qspi, BSPI, BSPI_RAF_READ_DATA);
292 /* BSPI v3 LR is LE only, convert data to host endianness */
293 if (bcm_qspi_bspi_ver_three(qspi))
294 data = le32_to_cpu(data);
296 return data;
299 static inline void bcm_qspi_bspi_lr_start(struct bcm_qspi *qspi)
301 bcm_qspi_bspi_busy_poll(qspi);
302 bcm_qspi_write(qspi, BSPI, BSPI_RAF_CTRL,
303 BSPI_RAF_CTRL_START_MASK);
306 static inline void bcm_qspi_bspi_lr_clear(struct bcm_qspi *qspi)
308 bcm_qspi_write(qspi, BSPI, BSPI_RAF_CTRL,
309 BSPI_RAF_CTRL_CLEAR_MASK);
310 bcm_qspi_bspi_flush_prefetch_buffers(qspi);
313 static void bcm_qspi_bspi_lr_data_read(struct bcm_qspi *qspi)
315 u32 *buf = (u32 *)qspi->bspi_rf_msg->buf;
316 u32 data = 0;
318 dev_dbg(&qspi->pdev->dev, "xfer %p rx %p rxlen %d\n", qspi->bspi_rf_msg,
319 qspi->bspi_rf_msg->buf, qspi->bspi_rf_msg_len);
320 while (!bcm_qspi_bspi_lr_is_fifo_empty(qspi)) {
321 data = bcm_qspi_bspi_lr_read_fifo(qspi);
322 if (likely(qspi->bspi_rf_msg_len >= 4) &&
323 IS_ALIGNED((uintptr_t)buf, 4)) {
324 buf[qspi->bspi_rf_msg_idx++] = data;
325 qspi->bspi_rf_msg_len -= 4;
326 } else {
327 /* Read out remaining bytes, make sure*/
328 u8 *cbuf = (u8 *)&buf[qspi->bspi_rf_msg_idx];
330 data = cpu_to_le32(data);
331 while (qspi->bspi_rf_msg_len) {
332 *cbuf++ = (u8)data;
333 data >>= 8;
334 qspi->bspi_rf_msg_len--;
340 static void bcm_qspi_bspi_set_xfer_params(struct bcm_qspi *qspi, u8 cmd_byte,
341 int bpp, int bpc, int flex_mode)
343 bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, 0);
344 bcm_qspi_write(qspi, BSPI, BSPI_BITS_PER_CYCLE, bpc);
345 bcm_qspi_write(qspi, BSPI, BSPI_BITS_PER_PHASE, bpp);
346 bcm_qspi_write(qspi, BSPI, BSPI_CMD_AND_MODE_BYTE, cmd_byte);
347 bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, flex_mode);
350 static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width,
351 int addrlen, int hp)
353 int bpc = 0, bpp = 0;
354 u8 command = SPINOR_OP_READ_FAST;
355 int flex_mode = 1, rv = 0;
356 bool spans_4byte = false;
358 dev_dbg(&qspi->pdev->dev, "set flex mode w %x addrlen %x hp %d\n",
359 width, addrlen, hp);
361 if (addrlen == BSPI_ADDRLEN_4BYTES) {
362 bpp = BSPI_BPP_ADDR_SELECT_MASK;
363 spans_4byte = true;
366 bpp |= 8;
368 switch (width) {
369 case SPI_NBITS_SINGLE:
370 if (addrlen == BSPI_ADDRLEN_3BYTES)
371 /* default mode, does not need flex_cmd */
372 flex_mode = 0;
373 else
374 command = SPINOR_OP_READ4_FAST;
375 break;
376 case SPI_NBITS_DUAL:
377 bpc = 0x00000001;
378 if (hp) {
379 bpc |= 0x00010100; /* address and mode are 2-bit */
380 bpp = BSPI_BPP_MODE_SELECT_MASK;
381 command = OPCODE_DIOR;
382 if (spans_4byte)
383 command = OPCODE_DIOR_4B;
384 } else {
385 command = SPINOR_OP_READ_1_1_2;
386 if (spans_4byte)
387 command = SPINOR_OP_READ4_1_1_2;
389 break;
390 case SPI_NBITS_QUAD:
391 bpc = 0x00000002;
392 if (hp) {
393 bpc |= 0x00020200; /* address and mode are 4-bit */
394 bpp = 4; /* dummy cycles */
395 bpp |= BSPI_BPP_ADDR_SELECT_MASK;
396 command = OPCODE_QIOR;
397 if (spans_4byte)
398 command = OPCODE_QIOR_4B;
399 } else {
400 command = SPINOR_OP_READ_1_1_4;
401 if (spans_4byte)
402 command = SPINOR_OP_READ4_1_1_4;
404 break;
405 default:
406 rv = -EINVAL;
407 break;
410 if (rv == 0)
411 bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc,
412 flex_mode);
414 return rv;
417 static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
418 int addrlen, int hp)
420 u32 data = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
422 dev_dbg(&qspi->pdev->dev, "set override mode w %x addrlen %x hp %d\n",
423 width, addrlen, hp);
425 switch (width) {
426 case SPI_NBITS_SINGLE:
427 /* clear quad/dual mode */
428 data &= ~(BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD |
429 BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL);
430 break;
432 case SPI_NBITS_QUAD:
433 /* clear dual mode and set quad mode */
434 data &= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL;
435 data |= BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD;
436 break;
437 case SPI_NBITS_DUAL:
438 /* clear quad mode set dual mode */
439 data &= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD;
440 data |= BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL;
441 break;
442 default:
443 return -EINVAL;
446 if (addrlen == BSPI_ADDRLEN_4BYTES)
447 /* set 4byte mode*/
448 data |= BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE;
449 else
450 /* clear 4 byte mode */
451 data &= ~BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE;
453 /* set the override mode */
454 data |= BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE;
455 bcm_qspi_write(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL, data);
456 bcm_qspi_bspi_set_xfer_params(qspi, SPINOR_OP_READ_FAST, 0, 0, 0);
458 return 0;
461 static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
462 int width, int addrlen, int hp)
464 int error = 0;
466 /* default mode */
467 qspi->xfer_mode.flex_mode = true;
469 if (!bcm_qspi_bspi_ver_three(qspi)) {
470 u32 val, mask;
472 val = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
473 mask = BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE;
474 if (val & mask || qspi->s3_strap_override_ctrl & mask) {
475 qspi->xfer_mode.flex_mode = false;
476 bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE,
479 if ((val | qspi->s3_strap_override_ctrl) &
480 BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL)
481 width = SPI_NBITS_DUAL;
482 else if ((val | qspi->s3_strap_override_ctrl) &
483 BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD)
484 width = SPI_NBITS_QUAD;
486 error = bcm_qspi_bspi_set_override(qspi, width, addrlen,
487 hp);
491 if (qspi->xfer_mode.flex_mode)
492 error = bcm_qspi_bspi_set_flex_mode(qspi, width, addrlen, hp);
494 if (error) {
495 dev_warn(&qspi->pdev->dev,
496 "INVALID COMBINATION: width=%d addrlen=%d hp=%d\n",
497 width, addrlen, hp);
498 } else if (qspi->xfer_mode.width != width ||
499 qspi->xfer_mode.addrlen != addrlen ||
500 qspi->xfer_mode.hp != hp) {
501 qspi->xfer_mode.width = width;
502 qspi->xfer_mode.addrlen = addrlen;
503 qspi->xfer_mode.hp = hp;
504 dev_dbg(&qspi->pdev->dev,
505 "cs:%d %d-lane output, %d-byte address%s\n",
506 qspi->curr_cs,
507 qspi->xfer_mode.width,
508 qspi->xfer_mode.addrlen,
509 qspi->xfer_mode.hp != -1 ? ", hp mode" : "");
512 return error;
515 static void bcm_qspi_enable_bspi(struct bcm_qspi *qspi)
517 if (!has_bspi(qspi) || (qspi->bspi_enabled))
518 return;
520 qspi->bspi_enabled = 1;
521 if ((bcm_qspi_read(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL) & 1) == 0)
522 return;
524 bcm_qspi_bspi_flush_prefetch_buffers(qspi);
525 udelay(1);
526 bcm_qspi_write(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL, 0);
527 udelay(1);
530 static void bcm_qspi_disable_bspi(struct bcm_qspi *qspi)
532 if (!has_bspi(qspi) || (!qspi->bspi_enabled))
533 return;
535 qspi->bspi_enabled = 0;
536 if ((bcm_qspi_read(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL) & 1))
537 return;
539 bcm_qspi_bspi_busy_poll(qspi);
540 bcm_qspi_write(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL, 1);
541 udelay(1);
544 static void bcm_qspi_chip_select(struct bcm_qspi *qspi, int cs)
546 u32 data = 0;
548 if (qspi->curr_cs == cs)
549 return;
550 if (qspi->base[CHIP_SELECT]) {
551 data = bcm_qspi_read(qspi, CHIP_SELECT, 0);
552 data = (data & ~0xff) | (1 << cs);
553 bcm_qspi_write(qspi, CHIP_SELECT, 0, data);
554 usleep_range(10, 20);
556 qspi->curr_cs = cs;
559 /* MSPI helpers */
560 static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi,
561 const struct bcm_qspi_parms *xp)
563 u32 spcr, spbr = 0;
565 if (xp->speed_hz)
566 spbr = qspi->base_clk / (2 * xp->speed_hz);
568 spcr = clamp_val(spbr, QSPI_SPBR_MIN, QSPI_SPBR_MAX);
569 bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, spcr);
571 spcr = MSPI_MASTER_BIT;
572 /* for 16 bit the data should be zero */
573 if (xp->bits_per_word != 16)
574 spcr |= xp->bits_per_word << 2;
575 spcr |= xp->mode & 3;
576 bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_MSB, spcr);
578 qspi->last_parms = *xp;
581 static void bcm_qspi_update_parms(struct bcm_qspi *qspi,
582 struct spi_device *spi,
583 struct spi_transfer *trans)
585 struct bcm_qspi_parms xp;
587 xp.speed_hz = trans->speed_hz;
588 xp.bits_per_word = trans->bits_per_word;
589 xp.mode = spi->mode;
591 bcm_qspi_hw_set_parms(qspi, &xp);
594 static int bcm_qspi_setup(struct spi_device *spi)
596 struct bcm_qspi_parms *xp;
598 if (spi->bits_per_word > 16)
599 return -EINVAL;
601 xp = spi_get_ctldata(spi);
602 if (!xp) {
603 xp = kzalloc(sizeof(*xp), GFP_KERNEL);
604 if (!xp)
605 return -ENOMEM;
606 spi_set_ctldata(spi, xp);
608 xp->speed_hz = spi->max_speed_hz;
609 xp->mode = spi->mode;
611 if (spi->bits_per_word)
612 xp->bits_per_word = spi->bits_per_word;
613 else
614 xp->bits_per_word = 8;
616 return 0;
619 static int update_qspi_trans_byte_count(struct bcm_qspi *qspi,
620 struct qspi_trans *qt, int flags)
622 int ret = TRANS_STATUS_BREAK_NONE;
624 /* count the last transferred bytes */
625 if (qt->trans->bits_per_word <= 8)
626 qt->byte++;
627 else
628 qt->byte += 2;
630 if (qt->byte >= qt->trans->len) {
631 /* we're at the end of the spi_transfer */
633 /* in TX mode, need to pause for a delay or CS change */
634 if (qt->trans->delay_usecs &&
635 (flags & TRANS_STATUS_BREAK_DELAY))
636 ret |= TRANS_STATUS_BREAK_DELAY;
637 if (qt->trans->cs_change &&
638 (flags & TRANS_STATUS_BREAK_CS_CHANGE))
639 ret |= TRANS_STATUS_BREAK_CS_CHANGE;
640 if (ret)
641 goto done;
643 dev_dbg(&qspi->pdev->dev, "advance msg exit\n");
644 if (spi_transfer_is_last(qspi->master, qt->trans))
645 ret = TRANS_STATUS_BREAK_EOM;
646 else
647 ret = TRANS_STATUS_BREAK_NO_BYTES;
649 qt->trans = NULL;
652 done:
653 dev_dbg(&qspi->pdev->dev, "trans %p len %d byte %d ret %x\n",
654 qt->trans, qt->trans ? qt->trans->len : 0, qt->byte, ret);
655 return ret;
658 static inline u8 read_rxram_slot_u8(struct bcm_qspi *qspi, int slot)
660 u32 slot_offset = MSPI_RXRAM + (slot << 3) + 0x4;
662 /* mask out reserved bits */
663 return bcm_qspi_read(qspi, MSPI, slot_offset) & 0xff;
666 static inline u16 read_rxram_slot_u16(struct bcm_qspi *qspi, int slot)
668 u32 reg_offset = MSPI_RXRAM;
669 u32 lsb_offset = reg_offset + (slot << 3) + 0x4;
670 u32 msb_offset = reg_offset + (slot << 3);
672 return (bcm_qspi_read(qspi, MSPI, lsb_offset) & 0xff) |
673 ((bcm_qspi_read(qspi, MSPI, msb_offset) & 0xff) << 8);
676 static void read_from_hw(struct bcm_qspi *qspi, int slots)
678 struct qspi_trans tp;
679 int slot;
681 bcm_qspi_disable_bspi(qspi);
683 if (slots > MSPI_NUM_CDRAM) {
684 /* should never happen */
685 dev_err(&qspi->pdev->dev, "%s: too many slots!\n", __func__);
686 return;
689 tp = qspi->trans_pos;
691 for (slot = 0; slot < slots; slot++) {
692 if (tp.trans->bits_per_word <= 8) {
693 u8 *buf = tp.trans->rx_buf;
695 if (buf)
696 buf[tp.byte] = read_rxram_slot_u8(qspi, slot);
697 dev_dbg(&qspi->pdev->dev, "RD %02x\n",
698 buf ? buf[tp.byte] : 0xff);
699 } else {
700 u16 *buf = tp.trans->rx_buf;
702 if (buf)
703 buf[tp.byte / 2] = read_rxram_slot_u16(qspi,
704 slot);
705 dev_dbg(&qspi->pdev->dev, "RD %04x\n",
706 buf ? buf[tp.byte] : 0xffff);
709 update_qspi_trans_byte_count(qspi, &tp,
710 TRANS_STATUS_BREAK_NONE);
713 qspi->trans_pos = tp;
716 static inline void write_txram_slot_u8(struct bcm_qspi *qspi, int slot,
717 u8 val)
719 u32 reg_offset = MSPI_TXRAM + (slot << 3);
721 /* mask out reserved bits */
722 bcm_qspi_write(qspi, MSPI, reg_offset, val);
725 static inline void write_txram_slot_u16(struct bcm_qspi *qspi, int slot,
726 u16 val)
728 u32 reg_offset = MSPI_TXRAM;
729 u32 msb_offset = reg_offset + (slot << 3);
730 u32 lsb_offset = reg_offset + (slot << 3) + 0x4;
732 bcm_qspi_write(qspi, MSPI, msb_offset, (val >> 8));
733 bcm_qspi_write(qspi, MSPI, lsb_offset, (val & 0xff));
736 static inline u32 read_cdram_slot(struct bcm_qspi *qspi, int slot)
738 return bcm_qspi_read(qspi, MSPI, MSPI_CDRAM + (slot << 2));
741 static inline void write_cdram_slot(struct bcm_qspi *qspi, int slot, u32 val)
743 bcm_qspi_write(qspi, MSPI, (MSPI_CDRAM + (slot << 2)), val);
746 /* Return number of slots written */
747 static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
749 struct qspi_trans tp;
750 int slot = 0, tstatus = 0;
751 u32 mspi_cdram = 0;
753 bcm_qspi_disable_bspi(qspi);
754 tp = qspi->trans_pos;
755 bcm_qspi_update_parms(qspi, spi, tp.trans);
757 /* Run until end of transfer or reached the max data */
758 while (!tstatus && slot < MSPI_NUM_CDRAM) {
759 if (tp.trans->bits_per_word <= 8) {
760 const u8 *buf = tp.trans->tx_buf;
761 u8 val = buf ? buf[tp.byte] : 0xff;
763 write_txram_slot_u8(qspi, slot, val);
764 dev_dbg(&qspi->pdev->dev, "WR %02x\n", val);
765 } else {
766 const u16 *buf = tp.trans->tx_buf;
767 u16 val = buf ? buf[tp.byte / 2] : 0xffff;
769 write_txram_slot_u16(qspi, slot, val);
770 dev_dbg(&qspi->pdev->dev, "WR %04x\n", val);
772 mspi_cdram = MSPI_CDRAM_CONT_BIT;
773 mspi_cdram |= (~(1 << spi->chip_select) &
774 MSPI_CDRAM_PCS);
775 mspi_cdram |= ((tp.trans->bits_per_word <= 8) ? 0 :
776 MSPI_CDRAM_BITSE_BIT);
778 write_cdram_slot(qspi, slot, mspi_cdram);
780 tstatus = update_qspi_trans_byte_count(qspi, &tp,
781 TRANS_STATUS_BREAK_TX);
782 slot++;
785 if (!slot) {
786 dev_err(&qspi->pdev->dev, "%s: no data to send?", __func__);
787 goto done;
790 dev_dbg(&qspi->pdev->dev, "submitting %d slots\n", slot);
791 bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0);
792 bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, slot - 1);
794 if (tstatus & TRANS_STATUS_BREAK_DESELECT) {
795 mspi_cdram = read_cdram_slot(qspi, slot - 1) &
796 ~MSPI_CDRAM_CONT_BIT;
797 write_cdram_slot(qspi, slot - 1, mspi_cdram);
800 if (has_bspi(qspi))
801 bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 1);
803 /* Must flush previous writes before starting MSPI operation */
804 mb();
805 /* Set cont | spe | spifie */
806 bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0xe0);
808 done:
809 return slot;
812 static int bcm_qspi_bspi_flash_read(struct spi_device *spi,
813 struct spi_flash_read_message *msg)
815 struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
816 u32 addr = 0, len, len_words;
817 int ret = 0;
818 unsigned long timeo = msecs_to_jiffies(100);
819 struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
821 if (bcm_qspi_bspi_ver_three(qspi))
822 if (msg->addr_width == BSPI_ADDRLEN_4BYTES)
823 return -EIO;
825 bcm_qspi_chip_select(qspi, spi->chip_select);
826 bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
829 * when using flex mode mode we need to send
830 * the upper address byte to bspi
832 if (bcm_qspi_bspi_ver_three(qspi) == false) {
833 addr = msg->from & 0xff000000;
834 bcm_qspi_write(qspi, BSPI,
835 BSPI_BSPI_FLASH_UPPER_ADDR_BYTE, addr);
838 if (!qspi->xfer_mode.flex_mode)
839 addr = msg->from;
840 else
841 addr = msg->from & 0x00ffffff;
843 /* set BSPI RAF buffer max read length */
844 len = msg->len;
845 if (len > BSPI_READ_LENGTH)
846 len = BSPI_READ_LENGTH;
848 if (bcm_qspi_bspi_ver_three(qspi) == true)
849 addr = (addr + 0xc00000) & 0xffffff;
851 reinit_completion(&qspi->bspi_done);
852 bcm_qspi_enable_bspi(qspi);
853 len_words = (len + 3) >> 2;
854 qspi->bspi_rf_msg = msg;
855 qspi->bspi_rf_msg_status = 0;
856 qspi->bspi_rf_msg_idx = 0;
857 qspi->bspi_rf_msg_len = len;
858 dev_dbg(&qspi->pdev->dev, "bspi xfr addr 0x%x len 0x%x", addr, len);
860 bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr);
861 bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words);
862 bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0);
864 if (qspi->soc_intc) {
866 * clear soc MSPI and BSPI interrupts and enable
867 * BSPI interrupts.
869 soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE);
870 soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true);
873 /* Must flush previous writes before starting BSPI operation */
874 mb();
876 bcm_qspi_bspi_lr_start(qspi);
877 if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) {
878 dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n");
879 ret = -ETIMEDOUT;
880 } else {
881 /* set the return length for the caller */
882 msg->retlen = len;
885 return ret;
888 static int bcm_qspi_flash_read(struct spi_device *spi,
889 struct spi_flash_read_message *msg)
891 struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
892 int ret = 0;
893 bool mspi_read = false;
894 u32 io_width, addrlen, addr, len;
895 u_char *buf;
897 buf = msg->buf;
898 addr = msg->from;
899 len = msg->len;
901 if (bcm_qspi_bspi_ver_three(qspi) == true) {
903 * The address coming into this function is a raw flash offset.
904 * But for BSPI <= V3, we need to convert it to a remapped BSPI
905 * address. If it crosses a 4MB boundary, just revert back to
906 * using MSPI.
908 addr = (addr + 0xc00000) & 0xffffff;
910 if ((~ADDR_4MB_MASK & addr) ^
911 (~ADDR_4MB_MASK & (addr + len - 1)))
912 mspi_read = true;
915 /* non-aligned and very short transfers are handled by MSPI */
916 if (!IS_ALIGNED((uintptr_t)addr, 4) || !IS_ALIGNED((uintptr_t)buf, 4) ||
917 len < 4)
918 mspi_read = true;
920 if (mspi_read)
921 /* this will make the m25p80 read to fallback to mspi read */
922 return -EAGAIN;
924 io_width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
925 addrlen = msg->addr_width;
926 ret = bcm_qspi_bspi_set_mode(qspi, io_width, addrlen, -1);
928 if (!ret)
929 ret = bcm_qspi_bspi_flash_read(spi, msg);
931 return ret;
934 static int bcm_qspi_transfer_one(struct spi_master *master,
935 struct spi_device *spi,
936 struct spi_transfer *trans)
938 struct bcm_qspi *qspi = spi_master_get_devdata(master);
939 int slots;
940 unsigned long timeo = msecs_to_jiffies(100);
942 bcm_qspi_chip_select(qspi, spi->chip_select);
943 qspi->trans_pos.trans = trans;
944 qspi->trans_pos.byte = 0;
946 while (qspi->trans_pos.byte < trans->len) {
947 reinit_completion(&qspi->mspi_done);
949 slots = write_to_hw(qspi, spi);
950 if (!wait_for_completion_timeout(&qspi->mspi_done, timeo)) {
951 dev_err(&qspi->pdev->dev, "timeout waiting for MSPI\n");
952 return -ETIMEDOUT;
955 read_from_hw(qspi, slots);
958 return 0;
961 static void bcm_qspi_cleanup(struct spi_device *spi)
963 struct bcm_qspi_parms *xp = spi_get_ctldata(spi);
965 kfree(xp);
968 static irqreturn_t bcm_qspi_mspi_l2_isr(int irq, void *dev_id)
970 struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
971 struct bcm_qspi *qspi = qspi_dev_id->dev;
972 u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS);
974 if (status & MSPI_MSPI_STATUS_SPIF) {
975 struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
976 /* clear interrupt */
977 status &= ~MSPI_MSPI_STATUS_SPIF;
978 bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status);
979 if (qspi->soc_intc)
980 soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_DONE);
981 complete(&qspi->mspi_done);
982 return IRQ_HANDLED;
985 return IRQ_NONE;
988 static irqreturn_t bcm_qspi_bspi_lr_l2_isr(int irq, void *dev_id)
990 struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
991 struct bcm_qspi *qspi = qspi_dev_id->dev;
992 struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
993 u32 status = qspi_dev_id->irqp->mask;
995 if (qspi->bspi_enabled && qspi->bspi_rf_msg) {
996 bcm_qspi_bspi_lr_data_read(qspi);
997 if (qspi->bspi_rf_msg_len == 0) {
998 qspi->bspi_rf_msg = NULL;
999 if (qspi->soc_intc) {
1000 /* disable soc BSPI interrupt */
1001 soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE,
1002 false);
1003 /* indicate done */
1004 status = INTR_BSPI_LR_SESSION_DONE_MASK;
1007 if (qspi->bspi_rf_msg_status)
1008 bcm_qspi_bspi_lr_clear(qspi);
1009 else
1010 bcm_qspi_bspi_flush_prefetch_buffers(qspi);
1013 if (qspi->soc_intc)
1014 /* clear soc BSPI interrupt */
1015 soc_intc->bcm_qspi_int_ack(soc_intc, BSPI_DONE);
1018 status &= INTR_BSPI_LR_SESSION_DONE_MASK;
1019 if (qspi->bspi_enabled && status && qspi->bspi_rf_msg_len == 0)
1020 complete(&qspi->bspi_done);
1022 return IRQ_HANDLED;
1025 static irqreturn_t bcm_qspi_bspi_lr_err_l2_isr(int irq, void *dev_id)
1027 struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
1028 struct bcm_qspi *qspi = qspi_dev_id->dev;
1029 struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
1031 dev_err(&qspi->pdev->dev, "BSPI INT error\n");
1032 qspi->bspi_rf_msg_status = -EIO;
1033 if (qspi->soc_intc)
1034 /* clear soc interrupt */
1035 soc_intc->bcm_qspi_int_ack(soc_intc, BSPI_ERR);
1037 complete(&qspi->bspi_done);
1038 return IRQ_HANDLED;
1041 static irqreturn_t bcm_qspi_l1_isr(int irq, void *dev_id)
1043 struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
1044 struct bcm_qspi *qspi = qspi_dev_id->dev;
1045 struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
1046 irqreturn_t ret = IRQ_NONE;
1048 if (soc_intc) {
1049 u32 status = soc_intc->bcm_qspi_get_int_status(soc_intc);
1051 if (status & MSPI_DONE)
1052 ret = bcm_qspi_mspi_l2_isr(irq, dev_id);
1053 else if (status & BSPI_DONE)
1054 ret = bcm_qspi_bspi_lr_l2_isr(irq, dev_id);
1055 else if (status & BSPI_ERR)
1056 ret = bcm_qspi_bspi_lr_err_l2_isr(irq, dev_id);
1059 return ret;
1062 static const struct bcm_qspi_irq qspi_irq_tab[] = {
1064 .irq_name = "spi_lr_fullness_reached",
1065 .irq_handler = bcm_qspi_bspi_lr_l2_isr,
1066 .mask = INTR_BSPI_LR_FULLNESS_REACHED_MASK,
1069 .irq_name = "spi_lr_session_aborted",
1070 .irq_handler = bcm_qspi_bspi_lr_err_l2_isr,
1071 .mask = INTR_BSPI_LR_SESSION_ABORTED_MASK,
1074 .irq_name = "spi_lr_impatient",
1075 .irq_handler = bcm_qspi_bspi_lr_err_l2_isr,
1076 .mask = INTR_BSPI_LR_IMPATIENT_MASK,
1079 .irq_name = "spi_lr_session_done",
1080 .irq_handler = bcm_qspi_bspi_lr_l2_isr,
1081 .mask = INTR_BSPI_LR_SESSION_DONE_MASK,
1083 #ifdef QSPI_INT_DEBUG
1084 /* this interrupt is for debug purposes only, dont request irq */
1086 .irq_name = "spi_lr_overread",
1087 .irq_handler = bcm_qspi_bspi_lr_err_l2_isr,
1088 .mask = INTR_BSPI_LR_OVERREAD_MASK,
1090 #endif
1092 .irq_name = "mspi_done",
1093 .irq_handler = bcm_qspi_mspi_l2_isr,
1094 .mask = INTR_MSPI_DONE_MASK,
1097 .irq_name = "mspi_halted",
1098 .irq_handler = bcm_qspi_mspi_l2_isr,
1099 .mask = INTR_MSPI_HALTED_MASK,
1102 /* single muxed L1 interrupt source */
1103 .irq_name = "spi_l1_intr",
1104 .irq_handler = bcm_qspi_l1_isr,
1105 .irq_source = MUXED_L1,
1106 .mask = QSPI_INTERRUPTS_ALL,
1110 static void bcm_qspi_bspi_init(struct bcm_qspi *qspi)
1112 u32 val = 0;
1114 val = bcm_qspi_read(qspi, BSPI, BSPI_REVISION_ID);
1115 qspi->bspi_maj_rev = (val >> 8) & 0xff;
1116 qspi->bspi_min_rev = val & 0xff;
1117 if (!(bcm_qspi_bspi_ver_three(qspi))) {
1118 /* Force mapping of BSPI address -> flash offset */
1119 bcm_qspi_write(qspi, BSPI, BSPI_BSPI_XOR_VALUE, 0);
1120 bcm_qspi_write(qspi, BSPI, BSPI_BSPI_XOR_ENABLE, 1);
1122 qspi->bspi_enabled = 1;
1123 bcm_qspi_disable_bspi(qspi);
1124 bcm_qspi_write(qspi, BSPI, BSPI_B0_CTRL, 0);
1125 bcm_qspi_write(qspi, BSPI, BSPI_B1_CTRL, 0);
1128 static void bcm_qspi_hw_init(struct bcm_qspi *qspi)
1130 struct bcm_qspi_parms parms;
1132 bcm_qspi_write(qspi, MSPI, MSPI_SPCR1_LSB, 0);
1133 bcm_qspi_write(qspi, MSPI, MSPI_SPCR1_MSB, 0);
1134 bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0);
1135 bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, 0);
1136 bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0x20);
1138 parms.mode = SPI_MODE_3;
1139 parms.bits_per_word = 8;
1140 parms.speed_hz = qspi->max_speed_hz;
1141 bcm_qspi_hw_set_parms(qspi, &parms);
1143 if (has_bspi(qspi))
1144 bcm_qspi_bspi_init(qspi);
1147 static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi)
1149 bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0);
1150 if (has_bspi(qspi))
1151 bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
1155 static const struct of_device_id bcm_qspi_of_match[] = {
1156 { .compatible = "brcm,spi-bcm-qspi" },
1159 MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
1161 int bcm_qspi_probe(struct platform_device *pdev,
1162 struct bcm_qspi_soc_intc *soc_intc)
1164 struct device *dev = &pdev->dev;
1165 struct bcm_qspi *qspi;
1166 struct spi_master *master;
1167 struct resource *res;
1168 int irq, ret = 0, num_ints = 0;
1169 u32 val;
1170 const char *name = NULL;
1171 int num_irqs = ARRAY_SIZE(qspi_irq_tab);
1173 /* We only support device-tree instantiation */
1174 if (!dev->of_node)
1175 return -ENODEV;
1177 if (!of_match_node(bcm_qspi_of_match, dev->of_node))
1178 return -ENODEV;
1180 master = spi_alloc_master(dev, sizeof(struct bcm_qspi));
1181 if (!master) {
1182 dev_err(dev, "error allocating spi_master\n");
1183 return -ENOMEM;
1186 qspi = spi_master_get_devdata(master);
1187 qspi->pdev = pdev;
1188 qspi->trans_pos.trans = NULL;
1189 qspi->trans_pos.byte = 0;
1190 qspi->master = master;
1192 master->bus_num = -1;
1193 master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_RX_DUAL | SPI_RX_QUAD;
1194 master->setup = bcm_qspi_setup;
1195 master->transfer_one = bcm_qspi_transfer_one;
1196 master->spi_flash_read = bcm_qspi_flash_read;
1197 master->cleanup = bcm_qspi_cleanup;
1198 master->dev.of_node = dev->of_node;
1199 master->num_chipselect = NUM_CHIPSELECT;
1201 qspi->big_endian = of_device_is_big_endian(dev->of_node);
1203 if (!of_property_read_u32(dev->of_node, "num-cs", &val))
1204 master->num_chipselect = val;
1206 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hif_mspi");
1207 if (!res)
1208 res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
1209 "mspi");
1211 if (res) {
1212 qspi->base[MSPI] = devm_ioremap_resource(dev, res);
1213 if (IS_ERR(qspi->base[MSPI])) {
1214 ret = PTR_ERR(qspi->base[MSPI]);
1215 goto qspi_probe_err;
1217 } else {
1218 goto qspi_probe_err;
1221 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "bspi");
1222 if (res) {
1223 qspi->base[BSPI] = devm_ioremap_resource(dev, res);
1224 if (IS_ERR(qspi->base[BSPI])) {
1225 ret = PTR_ERR(qspi->base[BSPI]);
1226 goto qspi_probe_err;
1228 qspi->bspi_mode = true;
1229 } else {
1230 qspi->bspi_mode = false;
1233 dev_info(dev, "using %smspi mode\n", qspi->bspi_mode ? "bspi-" : "");
1235 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cs_reg");
1236 if (res) {
1237 qspi->base[CHIP_SELECT] = devm_ioremap_resource(dev, res);
1238 if (IS_ERR(qspi->base[CHIP_SELECT])) {
1239 ret = PTR_ERR(qspi->base[CHIP_SELECT]);
1240 goto qspi_probe_err;
1244 qspi->dev_ids = kcalloc(num_irqs, sizeof(struct bcm_qspi_dev_id),
1245 GFP_KERNEL);
1246 if (!qspi->dev_ids) {
1247 ret = -ENOMEM;
1248 goto qspi_probe_err;
1251 for (val = 0; val < num_irqs; val++) {
1252 irq = -1;
1253 name = qspi_irq_tab[val].irq_name;
1254 if (qspi_irq_tab[val].irq_source == SINGLE_L2) {
1255 /* get the l2 interrupts */
1256 irq = platform_get_irq_byname(pdev, name);
1257 } else if (!num_ints && soc_intc) {
1258 /* all mspi, bspi intrs muxed to one L1 intr */
1259 irq = platform_get_irq(pdev, 0);
1262 if (irq >= 0) {
1263 ret = devm_request_irq(&pdev->dev, irq,
1264 qspi_irq_tab[val].irq_handler, 0,
1265 name,
1266 &qspi->dev_ids[val]);
1267 if (ret < 0) {
1268 dev_err(&pdev->dev, "IRQ %s not found\n", name);
1269 goto qspi_probe_err;
1272 qspi->dev_ids[val].dev = qspi;
1273 qspi->dev_ids[val].irqp = &qspi_irq_tab[val];
1274 num_ints++;
1275 dev_dbg(&pdev->dev, "registered IRQ %s %d\n",
1276 qspi_irq_tab[val].irq_name,
1277 irq);
1281 if (!num_ints) {
1282 dev_err(&pdev->dev, "no IRQs registered, cannot init driver\n");
1283 ret = -EINVAL;
1284 goto qspi_probe_err;
1288 * Some SoCs integrate spi controller (e.g., its interrupt bits)
1289 * in specific ways
1291 if (soc_intc) {
1292 qspi->soc_intc = soc_intc;
1293 soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true);
1294 } else {
1295 qspi->soc_intc = NULL;
1298 qspi->clk = devm_clk_get(&pdev->dev, NULL);
1299 if (IS_ERR(qspi->clk)) {
1300 dev_warn(dev, "unable to get clock\n");
1301 ret = PTR_ERR(qspi->clk);
1302 goto qspi_probe_err;
1305 ret = clk_prepare_enable(qspi->clk);
1306 if (ret) {
1307 dev_err(dev, "failed to prepare clock\n");
1308 goto qspi_probe_err;
1311 qspi->base_clk = clk_get_rate(qspi->clk);
1312 qspi->max_speed_hz = qspi->base_clk / (QSPI_SPBR_MIN * 2);
1314 bcm_qspi_hw_init(qspi);
1315 init_completion(&qspi->mspi_done);
1316 init_completion(&qspi->bspi_done);
1317 qspi->curr_cs = -1;
1319 platform_set_drvdata(pdev, qspi);
1321 qspi->xfer_mode.width = -1;
1322 qspi->xfer_mode.addrlen = -1;
1323 qspi->xfer_mode.hp = -1;
1325 ret = devm_spi_register_master(&pdev->dev, master);
1326 if (ret < 0) {
1327 dev_err(dev, "can't register master\n");
1328 goto qspi_reg_err;
1331 return 0;
1333 qspi_reg_err:
1334 bcm_qspi_hw_uninit(qspi);
1335 clk_disable_unprepare(qspi->clk);
1336 qspi_probe_err:
1337 spi_master_put(master);
1338 kfree(qspi->dev_ids);
1339 return ret;
1341 /* probe function to be called by SoC specific platform driver probe */
1342 EXPORT_SYMBOL_GPL(bcm_qspi_probe);
1344 int bcm_qspi_remove(struct platform_device *pdev)
1346 struct bcm_qspi *qspi = platform_get_drvdata(pdev);
1348 platform_set_drvdata(pdev, NULL);
1349 bcm_qspi_hw_uninit(qspi);
1350 clk_disable_unprepare(qspi->clk);
1351 kfree(qspi->dev_ids);
1352 spi_unregister_master(qspi->master);
1354 return 0;
1356 /* function to be called by SoC specific platform driver remove() */
1357 EXPORT_SYMBOL_GPL(bcm_qspi_remove);
1359 static int __maybe_unused bcm_qspi_suspend(struct device *dev)
1361 struct bcm_qspi *qspi = dev_get_drvdata(dev);
1363 spi_master_suspend(qspi->master);
1364 clk_disable(qspi->clk);
1365 bcm_qspi_hw_uninit(qspi);
1367 return 0;
1370 static int __maybe_unused bcm_qspi_resume(struct device *dev)
1372 struct bcm_qspi *qspi = dev_get_drvdata(dev);
1373 int ret = 0;
1375 bcm_qspi_hw_init(qspi);
1376 bcm_qspi_chip_select(qspi, qspi->curr_cs);
1377 if (qspi->soc_intc)
1378 /* enable MSPI interrupt */
1379 qspi->soc_intc->bcm_qspi_int_set(qspi->soc_intc, MSPI_DONE,
1380 true);
1382 ret = clk_enable(qspi->clk);
1383 if (!ret)
1384 spi_master_resume(qspi->master);
1386 return ret;
1389 SIMPLE_DEV_PM_OPS(bcm_qspi_pm_ops, bcm_qspi_suspend, bcm_qspi_resume);
1391 /* pm_ops to be called by SoC specific platform driver */
1392 EXPORT_SYMBOL_GPL(bcm_qspi_pm_ops);
1394 MODULE_AUTHOR("Kamal Dasu");
1395 MODULE_DESCRIPTION("Broadcom QSPI driver");
1396 MODULE_LICENSE("GPL v2");
1397 MODULE_ALIAS("platform:" DRIVER_NAME);