atomisp: remove fixedbds kernel code
[linux/fpc-iii.git] / include / drm / drm_drv.h
blob5699f42195fe1b9e1f26b825372423baad8906fd
1 /*
2 * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
3 * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
4 * Copyright (c) 2009-2010, Code Aurora Forum.
5 * Copyright 2016 Intel Corp.
7 * Permission is hereby granted, free of charge, to any person obtaining a
8 * copy of this software and associated documentation files (the "Software"),
9 * to deal in the Software without restriction, including without limitation
10 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
11 * and/or sell copies of the Software, and to permit persons to whom the
12 * Software is furnished to do so, subject to the following conditions:
14 * The above copyright notice and this permission notice (including the next
15 * paragraph) shall be included in all copies or substantial portions of the
16 * Software.
18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
21 * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
22 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
23 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
24 * OTHER DEALINGS IN THE SOFTWARE.
27 #ifndef _DRM_DRV_H_
28 #define _DRM_DRV_H_
30 #include <linux/list.h>
31 #include <linux/irqreturn.h>
33 struct drm_device;
34 struct drm_file;
35 struct drm_gem_object;
36 struct drm_master;
37 struct drm_minor;
38 struct dma_buf_attachment;
39 struct drm_display_mode;
40 struct drm_mode_create_dumb;
42 /* driver capabilities and requirements mask */
43 #define DRIVER_USE_AGP 0x1
44 #define DRIVER_LEGACY 0x2
45 #define DRIVER_PCI_DMA 0x8
46 #define DRIVER_SG 0x10
47 #define DRIVER_HAVE_DMA 0x20
48 #define DRIVER_HAVE_IRQ 0x40
49 #define DRIVER_IRQ_SHARED 0x80
50 #define DRIVER_GEM 0x1000
51 #define DRIVER_MODESET 0x2000
52 #define DRIVER_PRIME 0x4000
53 #define DRIVER_RENDER 0x8000
54 #define DRIVER_ATOMIC 0x10000
55 #define DRIVER_KMS_LEGACY_CONTEXT 0x20000
57 /**
58 * struct drm_driver - DRM driver structure
60 * This structure represent the common code for a family of cards. There will
61 * one drm_device for each card present in this family. It contains lots of
62 * vfunc entries, and a pile of those probably should be moved to more
63 * appropriate places like &drm_mode_config_funcs or into a new operations
64 * structure for GEM drivers.
66 struct drm_driver {
68 /**
69 * @load:
71 * Backward-compatible driver callback to complete
72 * initialization steps after the driver is registered. For
73 * this reason, may suffer from race conditions and its use is
74 * deprecated for new drivers. It is therefore only supported
75 * for existing drivers not yet converted to the new scheme.
76 * See drm_dev_init() and drm_dev_register() for proper and
77 * race-free way to set up a &struct drm_device.
79 * Returns:
81 * Zero on success, non-zero value on failure.
83 int (*load) (struct drm_device *, unsigned long flags);
84 int (*open) (struct drm_device *, struct drm_file *);
85 void (*preclose) (struct drm_device *, struct drm_file *file_priv);
86 void (*postclose) (struct drm_device *, struct drm_file *);
87 void (*lastclose) (struct drm_device *);
89 /**
90 * @unload:
92 * Reverse the effects of the driver load callback. Ideally,
93 * the clean up performed by the driver should happen in the
94 * reverse order of the initialization. Similarly to the load
95 * hook, this handler is deprecated and its usage should be
96 * dropped in favor of an open-coded teardown function at the
97 * driver layer. See drm_dev_unregister() and drm_dev_unref()
98 * for the proper way to remove a &struct drm_device.
100 * The unload() hook is called right after unregistering
101 * the device.
104 void (*unload) (struct drm_device *);
107 * @release:
109 * Optional callback for destroying device data after the final
110 * reference is released, i.e. the device is being destroyed. Drivers
111 * using this callback are responsible for calling drm_dev_fini()
112 * to finalize the device and then freeing the struct themselves.
114 void (*release) (struct drm_device *);
116 int (*set_busid)(struct drm_device *dev, struct drm_master *master);
119 * @get_vblank_counter:
121 * Driver callback for fetching a raw hardware vblank counter for the
122 * CRTC specified with the pipe argument. If a device doesn't have a
123 * hardware counter, the driver can simply use
124 * drm_vblank_no_hw_counter() function. The DRM core will account for
125 * missed vblank events while interrupts where disabled based on system
126 * timestamps.
128 * Wraparound handling and loss of events due to modesetting is dealt
129 * with in the DRM core code, as long as drivers call
130 * drm_crtc_vblank_off() and drm_crtc_vblank_on() when disabling or
131 * enabling a CRTC.
133 * Returns:
135 * Raw vblank counter value.
137 u32 (*get_vblank_counter) (struct drm_device *dev, unsigned int pipe);
140 * @enable_vblank:
142 * Enable vblank interrupts for the CRTC specified with the pipe
143 * argument.
145 * Returns:
147 * Zero on success, appropriate errno if the given @crtc's vblank
148 * interrupt cannot be enabled.
150 int (*enable_vblank) (struct drm_device *dev, unsigned int pipe);
153 * @disable_vblank:
155 * Disable vblank interrupts for the CRTC specified with the pipe
156 * argument.
158 void (*disable_vblank) (struct drm_device *dev, unsigned int pipe);
161 * @get_scanout_position:
163 * Called by vblank timestamping code.
165 * Returns the current display scanout position from a crtc, and an
166 * optional accurate ktime_get() timestamp of when position was
167 * measured. Note that this is a helper callback which is only used if a
168 * driver uses drm_calc_vbltimestamp_from_scanoutpos() for the
169 * @get_vblank_timestamp callback.
171 * Parameters:
173 * dev:
174 * DRM device.
175 * pipe:
176 * Id of the crtc to query.
177 * flags:
178 * Flags from the caller (DRM_CALLED_FROM_VBLIRQ or 0).
179 * vpos:
180 * Target location for current vertical scanout position.
181 * hpos:
182 * Target location for current horizontal scanout position.
183 * stime:
184 * Target location for timestamp taken immediately before
185 * scanout position query. Can be NULL to skip timestamp.
186 * etime:
187 * Target location for timestamp taken immediately after
188 * scanout position query. Can be NULL to skip timestamp.
189 * mode:
190 * Current display timings.
192 * Returns vpos as a positive number while in active scanout area.
193 * Returns vpos as a negative number inside vblank, counting the number
194 * of scanlines to go until end of vblank, e.g., -1 means "one scanline
195 * until start of active scanout / end of vblank."
197 * Returns:
199 * Flags, or'ed together as follows:
201 * DRM_SCANOUTPOS_VALID:
202 * Query successful.
203 * DRM_SCANOUTPOS_INVBL:
204 * Inside vblank.
205 * DRM_SCANOUTPOS_ACCURATE: Returned position is accurate. A lack of
206 * this flag means that returned position may be offset by a
207 * constant but unknown small number of scanlines wrt. real scanout
208 * position.
211 int (*get_scanout_position) (struct drm_device *dev, unsigned int pipe,
212 unsigned int flags, int *vpos, int *hpos,
213 ktime_t *stime, ktime_t *etime,
214 const struct drm_display_mode *mode);
217 * @get_vblank_timestamp:
219 * Called by drm_get_last_vbltimestamp(). Should return a precise
220 * timestamp when the most recent VBLANK interval ended or will end.
222 * Specifically, the timestamp in @vblank_time should correspond as
223 * closely as possible to the time when the first video scanline of
224 * the video frame after the end of VBLANK will start scanning out,
225 * the time immediately after end of the VBLANK interval. If the
226 * @crtc is currently inside VBLANK, this will be a time in the future.
227 * If the @crtc is currently scanning out a frame, this will be the
228 * past start time of the current scanout. This is meant to adhere
229 * to the OpenML OML_sync_control extension specification.
231 * Paramters:
233 * dev:
234 * dev DRM device handle.
235 * pipe:
236 * crtc for which timestamp should be returned.
237 * max_error:
238 * Maximum allowable timestamp error in nanoseconds.
239 * Implementation should strive to provide timestamp
240 * with an error of at most max_error nanoseconds.
241 * Returns true upper bound on error for timestamp.
242 * vblank_time:
243 * Target location for returned vblank timestamp.
244 * flags:
245 * 0 = Defaults, no special treatment needed.
246 * DRM_CALLED_FROM_VBLIRQ = Function is called from vblank
247 * irq handler. Some drivers need to apply some workarounds
248 * for gpu-specific vblank irq quirks if flag is set.
250 * Returns:
252 * Zero if timestamping isn't supported in current display mode or a
253 * negative number on failure. A positive status code on success,
254 * which describes how the vblank_time timestamp was computed.
256 int (*get_vblank_timestamp) (struct drm_device *dev, unsigned int pipe,
257 int *max_error,
258 struct timeval *vblank_time,
259 unsigned flags);
261 /* these have to be filled in */
263 irqreturn_t(*irq_handler) (int irq, void *arg);
264 void (*irq_preinstall) (struct drm_device *dev);
265 int (*irq_postinstall) (struct drm_device *dev);
266 void (*irq_uninstall) (struct drm_device *dev);
269 * @master_create:
271 * Called whenever a new master is created. Only used by vmwgfx.
273 int (*master_create)(struct drm_device *dev, struct drm_master *master);
276 * @master_destroy:
278 * Called whenever a master is destroyed. Only used by vmwgfx.
280 void (*master_destroy)(struct drm_device *dev, struct drm_master *master);
283 * @master_set:
285 * Called whenever the minor master is set. Only used by vmwgfx.
287 int (*master_set)(struct drm_device *dev, struct drm_file *file_priv,
288 bool from_open);
290 * @master_drop:
292 * Called whenever the minor master is dropped. Only used by vmwgfx.
294 void (*master_drop)(struct drm_device *dev, struct drm_file *file_priv);
296 int (*debugfs_init)(struct drm_minor *minor);
297 void (*debugfs_cleanup)(struct drm_minor *minor);
300 * @gem_free_object: deconstructor for drm_gem_objects
302 * This is deprecated and should not be used by new drivers. Use
303 * @gem_free_object_unlocked instead.
305 void (*gem_free_object) (struct drm_gem_object *obj);
308 * @gem_free_object_unlocked: deconstructor for drm_gem_objects
310 * This is for drivers which are not encumbered with &drm_device.struct_mutex
311 * legacy locking schemes. Use this hook instead of @gem_free_object.
313 void (*gem_free_object_unlocked) (struct drm_gem_object *obj);
315 int (*gem_open_object) (struct drm_gem_object *, struct drm_file *);
316 void (*gem_close_object) (struct drm_gem_object *, struct drm_file *);
319 * @gem_create_object: constructor for gem objects
321 * Hook for allocating the GEM object struct, for use by core
322 * helpers.
324 struct drm_gem_object *(*gem_create_object)(struct drm_device *dev,
325 size_t size);
327 /* prime: */
328 /* export handle -> fd (see drm_gem_prime_handle_to_fd() helper) */
329 int (*prime_handle_to_fd)(struct drm_device *dev, struct drm_file *file_priv,
330 uint32_t handle, uint32_t flags, int *prime_fd);
331 /* import fd -> handle (see drm_gem_prime_fd_to_handle() helper) */
332 int (*prime_fd_to_handle)(struct drm_device *dev, struct drm_file *file_priv,
333 int prime_fd, uint32_t *handle);
334 /* export GEM -> dmabuf */
335 struct dma_buf * (*gem_prime_export)(struct drm_device *dev,
336 struct drm_gem_object *obj, int flags);
337 /* import dmabuf -> GEM */
338 struct drm_gem_object * (*gem_prime_import)(struct drm_device *dev,
339 struct dma_buf *dma_buf);
340 /* low-level interface used by drm_gem_prime_{import,export} */
341 int (*gem_prime_pin)(struct drm_gem_object *obj);
342 void (*gem_prime_unpin)(struct drm_gem_object *obj);
343 struct reservation_object * (*gem_prime_res_obj)(
344 struct drm_gem_object *obj);
345 struct sg_table *(*gem_prime_get_sg_table)(struct drm_gem_object *obj);
346 struct drm_gem_object *(*gem_prime_import_sg_table)(
347 struct drm_device *dev,
348 struct dma_buf_attachment *attach,
349 struct sg_table *sgt);
350 void *(*gem_prime_vmap)(struct drm_gem_object *obj);
351 void (*gem_prime_vunmap)(struct drm_gem_object *obj, void *vaddr);
352 int (*gem_prime_mmap)(struct drm_gem_object *obj,
353 struct vm_area_struct *vma);
356 * @dumb_create:
358 * This creates a new dumb buffer in the driver's backing storage manager (GEM,
359 * TTM or something else entirely) and returns the resulting buffer handle. This
360 * handle can then be wrapped up into a framebuffer modeset object.
362 * Note that userspace is not allowed to use such objects for render
363 * acceleration - drivers must create their own private ioctls for such a use
364 * case.
366 * Width, height and depth are specified in the &drm_mode_create_dumb
367 * argument. The callback needs to fill the handle, pitch and size for
368 * the created buffer.
370 * Called by the user via ioctl.
372 * Returns:
374 * Zero on success, negative errno on failure.
376 int (*dumb_create)(struct drm_file *file_priv,
377 struct drm_device *dev,
378 struct drm_mode_create_dumb *args);
380 * @dumb_map_offset:
382 * Allocate an offset in the drm device node's address space to be able to
383 * memory map a dumb buffer. GEM-based drivers must use
384 * drm_gem_create_mmap_offset() to implement this.
386 * Called by the user via ioctl.
388 * Returns:
390 * Zero on success, negative errno on failure.
392 int (*dumb_map_offset)(struct drm_file *file_priv,
393 struct drm_device *dev, uint32_t handle,
394 uint64_t *offset);
396 * @dumb_destroy:
398 * This destroys the userspace handle for the given dumb backing storage buffer.
399 * Since buffer objects must be reference counted in the kernel a buffer object
400 * won't be immediately freed if a framebuffer modeset object still uses it.
402 * Called by the user via ioctl.
404 * Returns:
406 * Zero on success, negative errno on failure.
408 int (*dumb_destroy)(struct drm_file *file_priv,
409 struct drm_device *dev,
410 uint32_t handle);
412 /* Driver private ops for this object */
413 const struct vm_operations_struct *gem_vm_ops;
415 int major;
416 int minor;
417 int patchlevel;
418 char *name;
419 char *desc;
420 char *date;
422 u32 driver_features;
423 const struct drm_ioctl_desc *ioctls;
424 int num_ioctls;
425 const struct file_operations *fops;
427 /* Everything below here is for legacy driver, never use! */
428 /* private: */
430 /* List of devices hanging off this driver with stealth attach. */
431 struct list_head legacy_dev_list;
432 int (*firstopen) (struct drm_device *);
433 int (*dma_ioctl) (struct drm_device *dev, void *data, struct drm_file *file_priv);
434 int (*dma_quiescent) (struct drm_device *);
435 int (*context_dtor) (struct drm_device *dev, int context);
436 int dev_priv_size;
439 extern __printf(6, 7)
440 void drm_dev_printk(const struct device *dev, const char *level,
441 unsigned int category, const char *function_name,
442 const char *prefix, const char *format, ...);
443 extern __printf(3, 4)
444 void drm_printk(const char *level, unsigned int category,
445 const char *format, ...);
446 extern unsigned int drm_debug;
448 int drm_dev_init(struct drm_device *dev,
449 struct drm_driver *driver,
450 struct device *parent);
451 void drm_dev_fini(struct drm_device *dev);
453 struct drm_device *drm_dev_alloc(struct drm_driver *driver,
454 struct device *parent);
455 int drm_dev_register(struct drm_device *dev, unsigned long flags);
456 void drm_dev_unregister(struct drm_device *dev);
458 void drm_dev_ref(struct drm_device *dev);
459 void drm_dev_unref(struct drm_device *dev);
460 void drm_put_dev(struct drm_device *dev);
461 void drm_unplug_dev(struct drm_device *dev);
463 int drm_dev_set_unique(struct drm_device *dev, const char *name);
466 #endif