[S390] kernel: Add z/VM LGR detection
[linux/fpc-iii.git] / arch / mn10300 / kernel / smp.c
blob9242e9fcc56487d41a4c37c2019d7a4ed2614eec
1 /* SMP support routines.
3 * Copyright (C) 2006-2008 Panasonic Corporation
4 * All Rights Reserved.
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * version 2 as published by the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
16 #include <linux/interrupt.h>
17 #include <linux/spinlock.h>
18 #include <linux/init.h>
19 #include <linux/jiffies.h>
20 #include <linux/cpumask.h>
21 #include <linux/err.h>
22 #include <linux/kernel.h>
23 #include <linux/delay.h>
24 #include <linux/sched.h>
25 #include <linux/profile.h>
26 #include <linux/smp.h>
27 #include <asm/tlbflush.h>
28 #include <asm/system.h>
29 #include <asm/bitops.h>
30 #include <asm/processor.h>
31 #include <asm/bug.h>
32 #include <asm/exceptions.h>
33 #include <asm/hardirq.h>
34 #include <asm/fpu.h>
35 #include <asm/mmu_context.h>
36 #include <asm/thread_info.h>
37 #include <asm/cpu-regs.h>
38 #include <asm/intctl-regs.h>
39 #include "internal.h"
41 #ifdef CONFIG_HOTPLUG_CPU
42 #include <linux/cpu.h>
43 #include <asm/cacheflush.h>
45 static unsigned long sleep_mode[NR_CPUS];
47 static void run_sleep_cpu(unsigned int cpu);
48 static void run_wakeup_cpu(unsigned int cpu);
49 #endif /* CONFIG_HOTPLUG_CPU */
52 * Debug Message function
55 #undef DEBUG_SMP
56 #ifdef DEBUG_SMP
57 #define Dprintk(fmt, ...) printk(KERN_DEBUG fmt, ##__VA_ARGS__)
58 #else
59 #define Dprintk(fmt, ...) no_printk(KERN_DEBUG fmt, ##__VA_ARGS__)
60 #endif
62 /* timeout value in msec for smp_nmi_call_function. zero is no timeout. */
63 #define CALL_FUNCTION_NMI_IPI_TIMEOUT 0
66 * Structure and data for smp_nmi_call_function().
68 struct nmi_call_data_struct {
69 smp_call_func_t func;
70 void *info;
71 cpumask_t started;
72 cpumask_t finished;
73 int wait;
74 char size_alignment[0]
75 __attribute__ ((__aligned__(SMP_CACHE_BYTES)));
76 } __attribute__ ((__aligned__(SMP_CACHE_BYTES)));
78 static DEFINE_SPINLOCK(smp_nmi_call_lock);
79 static struct nmi_call_data_struct *nmi_call_data;
82 * Data structures and variables
84 static cpumask_t cpu_callin_map; /* Bitmask of callin CPUs */
85 static cpumask_t cpu_callout_map; /* Bitmask of callout CPUs */
86 cpumask_t cpu_boot_map; /* Bitmask of boot APs */
87 unsigned long start_stack[NR_CPUS - 1];
90 * Per CPU parameters
92 struct mn10300_cpuinfo cpu_data[NR_CPUS] __cacheline_aligned;
94 static int cpucount; /* The count of boot CPUs */
95 static cpumask_t smp_commenced_mask;
96 cpumask_t cpu_initialized __initdata = CPU_MASK_NONE;
99 * Function Prototypes
101 static int do_boot_cpu(int);
102 static void smp_show_cpu_info(int cpu_id);
103 static void smp_callin(void);
104 static void smp_online(void);
105 static void smp_store_cpu_info(int);
106 static void smp_cpu_init(void);
107 static void smp_tune_scheduling(void);
108 static void send_IPI_mask(const cpumask_t *cpumask, int irq);
109 static void init_ipi(void);
112 * IPI Initialization interrupt definitions
114 static void mn10300_ipi_disable(unsigned int irq);
115 static void mn10300_ipi_enable(unsigned int irq);
116 static void mn10300_ipi_chip_disable(struct irq_data *d);
117 static void mn10300_ipi_chip_enable(struct irq_data *d);
118 static void mn10300_ipi_ack(struct irq_data *d);
119 static void mn10300_ipi_nop(struct irq_data *d);
121 static struct irq_chip mn10300_ipi_type = {
122 .name = "cpu_ipi",
123 .irq_disable = mn10300_ipi_chip_disable,
124 .irq_enable = mn10300_ipi_chip_enable,
125 .irq_ack = mn10300_ipi_ack,
126 .irq_eoi = mn10300_ipi_nop
129 static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id);
130 static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id);
132 static struct irqaction reschedule_ipi = {
133 .handler = smp_reschedule_interrupt,
134 .name = "smp reschedule IPI"
136 static struct irqaction call_function_ipi = {
137 .handler = smp_call_function_interrupt,
138 .name = "smp call function IPI"
141 #if !defined(CONFIG_GENERIC_CLOCKEVENTS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
142 static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id);
143 static struct irqaction local_timer_ipi = {
144 .handler = smp_ipi_timer_interrupt,
145 .flags = IRQF_DISABLED,
146 .name = "smp local timer IPI"
148 #endif
151 * init_ipi - Initialise the IPI mechanism
153 static void init_ipi(void)
155 unsigned long flags;
156 u16 tmp16;
158 /* set up the reschedule IPI */
159 irq_set_chip_and_handler(RESCHEDULE_IPI, &mn10300_ipi_type,
160 handle_percpu_irq);
161 setup_irq(RESCHEDULE_IPI, &reschedule_ipi);
162 set_intr_level(RESCHEDULE_IPI, RESCHEDULE_GxICR_LV);
163 mn10300_ipi_enable(RESCHEDULE_IPI);
165 /* set up the call function IPI */
166 irq_set_chip_and_handler(CALL_FUNC_SINGLE_IPI, &mn10300_ipi_type,
167 handle_percpu_irq);
168 setup_irq(CALL_FUNC_SINGLE_IPI, &call_function_ipi);
169 set_intr_level(CALL_FUNC_SINGLE_IPI, CALL_FUNCTION_GxICR_LV);
170 mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI);
172 /* set up the local timer IPI */
173 #if !defined(CONFIG_GENERIC_CLOCKEVENTS) || \
174 defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
175 irq_set_chip_and_handler(LOCAL_TIMER_IPI, &mn10300_ipi_type,
176 handle_percpu_irq);
177 setup_irq(LOCAL_TIMER_IPI, &local_timer_ipi);
178 set_intr_level(LOCAL_TIMER_IPI, LOCAL_TIMER_GxICR_LV);
179 mn10300_ipi_enable(LOCAL_TIMER_IPI);
180 #endif
182 #ifdef CONFIG_MN10300_CACHE_ENABLED
183 /* set up the cache flush IPI */
184 flags = arch_local_cli_save();
185 __set_intr_stub(NUM2EXCEP_IRQ_LEVEL(FLUSH_CACHE_GxICR_LV),
186 mn10300_low_ipi_handler);
187 GxICR(FLUSH_CACHE_IPI) = FLUSH_CACHE_GxICR_LV | GxICR_DETECT;
188 mn10300_ipi_enable(FLUSH_CACHE_IPI);
189 arch_local_irq_restore(flags);
190 #endif
192 /* set up the NMI call function IPI */
193 flags = arch_local_cli_save();
194 GxICR(CALL_FUNCTION_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT;
195 tmp16 = GxICR(CALL_FUNCTION_NMI_IPI);
196 arch_local_irq_restore(flags);
198 /* set up the SMP boot IPI */
199 flags = arch_local_cli_save();
200 __set_intr_stub(NUM2EXCEP_IRQ_LEVEL(SMP_BOOT_GxICR_LV),
201 mn10300_low_ipi_handler);
202 arch_local_irq_restore(flags);
206 * mn10300_ipi_shutdown - Shut down handling of an IPI
207 * @irq: The IPI to be shut down.
209 static void mn10300_ipi_shutdown(unsigned int irq)
211 unsigned long flags;
212 u16 tmp;
214 flags = arch_local_cli_save();
216 tmp = GxICR(irq);
217 GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
218 tmp = GxICR(irq);
220 arch_local_irq_restore(flags);
224 * mn10300_ipi_enable - Enable an IPI
225 * @irq: The IPI to be enabled.
227 static void mn10300_ipi_enable(unsigned int irq)
229 unsigned long flags;
230 u16 tmp;
232 flags = arch_local_cli_save();
234 tmp = GxICR(irq);
235 GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
236 tmp = GxICR(irq);
238 arch_local_irq_restore(flags);
241 static void mn10300_ipi_chip_enable(struct irq_data *d)
243 mn10300_ipi_enable(d->irq);
247 * mn10300_ipi_disable - Disable an IPI
248 * @irq: The IPI to be disabled.
250 static void mn10300_ipi_disable(unsigned int irq)
252 unsigned long flags;
253 u16 tmp;
255 flags = arch_local_cli_save();
257 tmp = GxICR(irq);
258 GxICR(irq) = tmp & GxICR_LEVEL;
259 tmp = GxICR(irq);
261 arch_local_irq_restore(flags);
264 static void mn10300_ipi_chip_disable(struct irq_data *d)
266 mn10300_ipi_disable(d->irq);
271 * mn10300_ipi_ack - Acknowledge an IPI interrupt in the PIC
272 * @irq: The IPI to be acknowledged.
274 * Clear the interrupt detection flag for the IPI on the appropriate interrupt
275 * channel in the PIC.
277 static void mn10300_ipi_ack(struct irq_data *d)
279 unsigned int irq = d->irq;
280 unsigned long flags;
281 u16 tmp;
283 flags = arch_local_cli_save();
284 GxICR_u8(irq) = GxICR_DETECT;
285 tmp = GxICR(irq);
286 arch_local_irq_restore(flags);
290 * mn10300_ipi_nop - Dummy IPI action
291 * @irq: The IPI to be acted upon.
293 static void mn10300_ipi_nop(struct irq_data *d)
298 * send_IPI_mask - Send IPIs to all CPUs in list
299 * @cpumask: The list of CPUs to target.
300 * @irq: The IPI request to be sent.
302 * Send the specified IPI to all the CPUs in the list, not waiting for them to
303 * finish before returning. The caller is responsible for synchronisation if
304 * that is needed.
306 static void send_IPI_mask(const cpumask_t *cpumask, int irq)
308 int i;
309 u16 tmp;
311 for (i = 0; i < NR_CPUS; i++) {
312 if (cpumask_test_cpu(i, cpumask)) {
313 /* send IPI */
314 tmp = CROSS_GxICR(irq, i);
315 CROSS_GxICR(irq, i) =
316 tmp | GxICR_REQUEST | GxICR_DETECT;
317 tmp = CROSS_GxICR(irq, i); /* flush write buffer */
323 * send_IPI_self - Send an IPI to this CPU.
324 * @irq: The IPI request to be sent.
326 * Send the specified IPI to the current CPU.
328 void send_IPI_self(int irq)
330 send_IPI_mask(cpumask_of(smp_processor_id()), irq);
334 * send_IPI_allbutself - Send IPIs to all the other CPUs.
335 * @irq: The IPI request to be sent.
337 * Send the specified IPI to all CPUs in the system barring the current one,
338 * not waiting for them to finish before returning. The caller is responsible
339 * for synchronisation if that is needed.
341 void send_IPI_allbutself(int irq)
343 cpumask_t cpumask;
345 cpumask_copy(&cpumask, cpu_online_mask);
346 cpumask_clear_cpu(smp_processor_id(), &cpumask);
347 send_IPI_mask(&cpumask, irq);
350 void arch_send_call_function_ipi_mask(const struct cpumask *mask)
352 BUG();
353 /*send_IPI_mask(mask, CALL_FUNCTION_IPI);*/
356 void arch_send_call_function_single_ipi(int cpu)
358 send_IPI_mask(cpumask_of(cpu), CALL_FUNC_SINGLE_IPI);
362 * smp_send_reschedule - Send reschedule IPI to a CPU
363 * @cpu: The CPU to target.
365 void smp_send_reschedule(int cpu)
367 send_IPI_mask(cpumask_of(cpu), RESCHEDULE_IPI);
371 * smp_nmi_call_function - Send a call function NMI IPI to all CPUs
372 * @func: The function to ask to be run.
373 * @info: The context data to pass to that function.
374 * @wait: If true, wait (atomically) until function is run on all CPUs.
376 * Send a non-maskable request to all CPUs in the system, requesting them to
377 * run the specified function with the given context data, and, potentially, to
378 * wait for completion of that function on all CPUs.
380 * Returns 0 if successful, -ETIMEDOUT if we were asked to wait, but hit the
381 * timeout.
383 int smp_nmi_call_function(smp_call_func_t func, void *info, int wait)
385 struct nmi_call_data_struct data;
386 unsigned long flags;
387 unsigned int cnt;
388 int cpus, ret = 0;
390 cpus = num_online_cpus() - 1;
391 if (cpus < 1)
392 return 0;
394 data.func = func;
395 data.info = info;
396 cpumask_copy(&data.started, cpu_online_mask);
397 cpumask_clear_cpu(smp_processor_id(), &data.started);
398 data.wait = wait;
399 if (wait)
400 data.finished = data.started;
402 spin_lock_irqsave(&smp_nmi_call_lock, flags);
403 nmi_call_data = &data;
404 smp_mb();
406 /* Send a message to all other CPUs and wait for them to respond */
407 send_IPI_allbutself(CALL_FUNCTION_NMI_IPI);
409 /* Wait for response */
410 if (CALL_FUNCTION_NMI_IPI_TIMEOUT > 0) {
411 for (cnt = 0;
412 cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT &&
413 !cpumask_empty(&data.started);
414 cnt++)
415 mdelay(1);
417 if (wait && cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT) {
418 for (cnt = 0;
419 cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT &&
420 !cpumask_empty(&data.finished);
421 cnt++)
422 mdelay(1);
425 if (cnt >= CALL_FUNCTION_NMI_IPI_TIMEOUT)
426 ret = -ETIMEDOUT;
428 } else {
429 /* If timeout value is zero, wait until cpumask has been
430 * cleared */
431 while (!cpumask_empty(&data.started))
432 barrier();
433 if (wait)
434 while (!cpumask_empty(&data.finished))
435 barrier();
438 spin_unlock_irqrestore(&smp_nmi_call_lock, flags);
439 return ret;
443 * smp_jump_to_debugger - Make other CPUs enter the debugger by sending an IPI
445 * Send a non-maskable request to all other CPUs in the system, instructing
446 * them to jump into the debugger. The caller is responsible for checking that
447 * the other CPUs responded to the instruction.
449 * The caller should make sure that this CPU's debugger IPI is disabled.
451 void smp_jump_to_debugger(void)
453 if (num_online_cpus() > 1)
454 /* Send a message to all other CPUs */
455 send_IPI_allbutself(DEBUGGER_NMI_IPI);
459 * stop_this_cpu - Callback to stop a CPU.
460 * @unused: Callback context (ignored).
462 void stop_this_cpu(void *unused)
464 static volatile int stopflag;
465 unsigned long flags;
467 #ifdef CONFIG_GDBSTUB
468 /* In case of single stepping smp_send_stop by other CPU,
469 * clear procindebug to avoid deadlock.
471 atomic_set(&procindebug[smp_processor_id()], 0);
472 #endif /* CONFIG_GDBSTUB */
474 flags = arch_local_cli_save();
475 set_cpu_online(smp_processor_id(), false);
477 while (!stopflag)
478 cpu_relax();
480 set_cpu_online(smp_processor_id(), true);
481 arch_local_irq_restore(flags);
485 * smp_send_stop - Send a stop request to all CPUs.
487 void smp_send_stop(void)
489 smp_nmi_call_function(stop_this_cpu, NULL, 0);
493 * smp_reschedule_interrupt - Reschedule IPI handler
494 * @irq: The interrupt number.
495 * @dev_id: The device ID.
497 * Returns IRQ_HANDLED to indicate we handled the interrupt successfully.
499 static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id)
501 scheduler_ipi();
502 return IRQ_HANDLED;
506 * smp_call_function_interrupt - Call function IPI handler
507 * @irq: The interrupt number.
508 * @dev_id: The device ID.
510 * Returns IRQ_HANDLED to indicate we handled the interrupt successfully.
512 static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id)
514 /* generic_smp_call_function_interrupt(); */
515 generic_smp_call_function_single_interrupt();
516 return IRQ_HANDLED;
520 * smp_nmi_call_function_interrupt - Non-maskable call function IPI handler
522 void smp_nmi_call_function_interrupt(void)
524 smp_call_func_t func = nmi_call_data->func;
525 void *info = nmi_call_data->info;
526 int wait = nmi_call_data->wait;
528 /* Notify the initiating CPU that I've grabbed the data and am about to
529 * execute the function
531 smp_mb();
532 cpumask_clear_cpu(smp_processor_id(), &nmi_call_data->started);
533 (*func)(info);
535 if (wait) {
536 smp_mb();
537 cpumask_clear_cpu(smp_processor_id(),
538 &nmi_call_data->finished);
542 #if !defined(CONFIG_GENERIC_CLOCKEVENTS) || \
543 defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
545 * smp_ipi_timer_interrupt - Local timer IPI handler
546 * @irq: The interrupt number.
547 * @dev_id: The device ID.
549 * Returns IRQ_HANDLED to indicate we handled the interrupt successfully.
551 static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id)
553 return local_timer_interrupt();
555 #endif
557 void __init smp_init_cpus(void)
559 int i;
560 for (i = 0; i < NR_CPUS; i++) {
561 set_cpu_possible(i, true);
562 set_cpu_present(i, true);
567 * smp_cpu_init - Initialise AP in start_secondary.
569 * For this Application Processor, set up init_mm, initialise FPU and set
570 * interrupt level 0-6 setting.
572 static void __init smp_cpu_init(void)
574 unsigned long flags;
575 int cpu_id = smp_processor_id();
576 u16 tmp16;
578 if (test_and_set_bit(cpu_id, &cpu_initialized)) {
579 printk(KERN_WARNING "CPU#%d already initialized!\n", cpu_id);
580 for (;;)
581 local_irq_enable();
583 printk(KERN_INFO "Initializing CPU#%d\n", cpu_id);
585 atomic_inc(&init_mm.mm_count);
586 current->active_mm = &init_mm;
587 BUG_ON(current->mm);
589 enter_lazy_tlb(&init_mm, current);
591 /* Force FPU initialization */
592 clear_using_fpu(current);
594 GxICR(CALL_FUNC_SINGLE_IPI) = CALL_FUNCTION_GxICR_LV | GxICR_DETECT;
595 mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI);
597 GxICR(LOCAL_TIMER_IPI) = LOCAL_TIMER_GxICR_LV | GxICR_DETECT;
598 mn10300_ipi_enable(LOCAL_TIMER_IPI);
600 GxICR(RESCHEDULE_IPI) = RESCHEDULE_GxICR_LV | GxICR_DETECT;
601 mn10300_ipi_enable(RESCHEDULE_IPI);
603 #ifdef CONFIG_MN10300_CACHE_ENABLED
604 GxICR(FLUSH_CACHE_IPI) = FLUSH_CACHE_GxICR_LV | GxICR_DETECT;
605 mn10300_ipi_enable(FLUSH_CACHE_IPI);
606 #endif
608 mn10300_ipi_shutdown(SMP_BOOT_IRQ);
610 /* Set up the non-maskable call function IPI */
611 flags = arch_local_cli_save();
612 GxICR(CALL_FUNCTION_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT;
613 tmp16 = GxICR(CALL_FUNCTION_NMI_IPI);
614 arch_local_irq_restore(flags);
618 * smp_prepare_cpu_init - Initialise CPU in startup_secondary
620 * Set interrupt level 0-6 setting and init ICR of the kernel debugger.
622 void smp_prepare_cpu_init(void)
624 int loop;
626 /* Set the interrupt vector registers */
627 IVAR0 = EXCEP_IRQ_LEVEL0;
628 IVAR1 = EXCEP_IRQ_LEVEL1;
629 IVAR2 = EXCEP_IRQ_LEVEL2;
630 IVAR3 = EXCEP_IRQ_LEVEL3;
631 IVAR4 = EXCEP_IRQ_LEVEL4;
632 IVAR5 = EXCEP_IRQ_LEVEL5;
633 IVAR6 = EXCEP_IRQ_LEVEL6;
635 /* Disable all interrupts and set to priority 6 (lowest) */
636 for (loop = 0; loop < GxICR_NUM_IRQS; loop++)
637 GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
639 #ifdef CONFIG_KERNEL_DEBUGGER
640 /* initialise the kernel debugger interrupt */
641 do {
642 unsigned long flags;
643 u16 tmp16;
645 flags = arch_local_cli_save();
646 GxICR(DEBUGGER_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT;
647 tmp16 = GxICR(DEBUGGER_NMI_IPI);
648 arch_local_irq_restore(flags);
649 } while (0);
650 #endif
654 * start_secondary - Activate a secondary CPU (AP)
655 * @unused: Thread parameter (ignored).
657 int __init start_secondary(void *unused)
659 smp_cpu_init();
660 smp_callin();
661 while (!cpumask_test_cpu(smp_processor_id(), &smp_commenced_mask))
662 cpu_relax();
664 local_flush_tlb();
665 preempt_disable();
666 smp_online();
668 #ifdef CONFIG_GENERIC_CLOCKEVENTS
669 init_clockevents();
670 #endif
671 cpu_idle();
672 return 0;
676 * smp_prepare_cpus - Boot up secondary CPUs (APs)
677 * @max_cpus: Maximum number of CPUs to boot.
679 * Call do_boot_cpu, and boot up APs.
681 void __init smp_prepare_cpus(unsigned int max_cpus)
683 int phy_id;
685 /* Setup boot CPU information */
686 smp_store_cpu_info(0);
687 smp_tune_scheduling();
689 init_ipi();
691 /* If SMP should be disabled, then finish */
692 if (max_cpus == 0) {
693 printk(KERN_INFO "SMP mode deactivated.\n");
694 goto smp_done;
697 /* Boot secondary CPUs (for which phy_id > 0) */
698 for (phy_id = 0; phy_id < NR_CPUS; phy_id++) {
699 /* Don't boot primary CPU */
700 if (max_cpus <= cpucount + 1)
701 continue;
702 if (phy_id != 0)
703 do_boot_cpu(phy_id);
704 set_cpu_possible(phy_id, true);
705 smp_show_cpu_info(phy_id);
708 smp_done:
709 Dprintk("Boot done.\n");
713 * smp_store_cpu_info - Save a CPU's information
714 * @cpu: The CPU to save for.
716 * Save boot_cpu_data and jiffy for the specified CPU.
718 static void __init smp_store_cpu_info(int cpu)
720 struct mn10300_cpuinfo *ci = &cpu_data[cpu];
722 *ci = boot_cpu_data;
723 ci->loops_per_jiffy = loops_per_jiffy;
724 ci->type = CPUREV;
728 * smp_tune_scheduling - Set time slice value
730 * Nothing to do here.
732 static void __init smp_tune_scheduling(void)
737 * do_boot_cpu: Boot up one CPU
738 * @phy_id: Physical ID of CPU to boot.
740 * Send an IPI to a secondary CPU to boot it. Returns 0 on success, 1
741 * otherwise.
743 static int __init do_boot_cpu(int phy_id)
745 struct task_struct *idle;
746 unsigned long send_status, callin_status;
747 int timeout, cpu_id;
749 send_status = GxICR_REQUEST;
750 callin_status = 0;
751 timeout = 0;
752 cpu_id = phy_id;
754 cpucount++;
756 /* Create idle thread for this CPU */
757 idle = fork_idle(cpu_id);
758 if (IS_ERR(idle))
759 panic("Failed fork for CPU#%d.", cpu_id);
761 idle->thread.pc = (unsigned long)start_secondary;
763 printk(KERN_NOTICE "Booting CPU#%d\n", cpu_id);
764 start_stack[cpu_id - 1] = idle->thread.sp;
766 task_thread_info(idle)->cpu = cpu_id;
768 /* Send boot IPI to AP */
769 send_IPI_mask(cpumask_of(phy_id), SMP_BOOT_IRQ);
771 Dprintk("Waiting for send to finish...\n");
773 /* Wait for AP's IPI receive in 100[ms] */
774 do {
775 udelay(1000);
776 send_status =
777 CROSS_GxICR(SMP_BOOT_IRQ, phy_id) & GxICR_REQUEST;
778 } while (send_status == GxICR_REQUEST && timeout++ < 100);
780 Dprintk("Waiting for cpu_callin_map.\n");
782 if (send_status == 0) {
783 /* Allow AP to start initializing */
784 cpumask_set_cpu(cpu_id, &cpu_callout_map);
786 /* Wait for setting cpu_callin_map */
787 timeout = 0;
788 do {
789 udelay(1000);
790 callin_status = cpumask_test_cpu(cpu_id,
791 &cpu_callin_map);
792 } while (callin_status == 0 && timeout++ < 5000);
794 if (callin_status == 0)
795 Dprintk("Not responding.\n");
796 } else {
797 printk(KERN_WARNING "IPI not delivered.\n");
800 if (send_status == GxICR_REQUEST || callin_status == 0) {
801 cpumask_clear_cpu(cpu_id, &cpu_callout_map);
802 cpumask_clear_cpu(cpu_id, &cpu_callin_map);
803 cpumask_clear_cpu(cpu_id, &cpu_initialized);
804 cpucount--;
805 return 1;
807 return 0;
811 * smp_show_cpu_info - Show SMP CPU information
812 * @cpu: The CPU of interest.
814 static void __init smp_show_cpu_info(int cpu)
816 struct mn10300_cpuinfo *ci = &cpu_data[cpu];
818 printk(KERN_INFO
819 "CPU#%d : ioclk speed: %lu.%02luMHz : bogomips : %lu.%02lu\n",
820 cpu,
821 MN10300_IOCLK / 1000000,
822 (MN10300_IOCLK / 10000) % 100,
823 ci->loops_per_jiffy / (500000 / HZ),
824 (ci->loops_per_jiffy / (5000 / HZ)) % 100);
828 * smp_callin - Set cpu_callin_map of the current CPU ID
830 static void __init smp_callin(void)
832 unsigned long timeout;
833 int cpu;
835 cpu = smp_processor_id();
836 timeout = jiffies + (2 * HZ);
838 if (cpumask_test_cpu(cpu, &cpu_callin_map)) {
839 printk(KERN_ERR "CPU#%d already present.\n", cpu);
840 BUG();
842 Dprintk("CPU#%d waiting for CALLOUT\n", cpu);
844 /* Wait for AP startup 2s total */
845 while (time_before(jiffies, timeout)) {
846 if (cpumask_test_cpu(cpu, &cpu_callout_map))
847 break;
848 cpu_relax();
851 if (!time_before(jiffies, timeout)) {
852 printk(KERN_ERR
853 "BUG: CPU#%d started up but did not get a callout!\n",
854 cpu);
855 BUG();
858 #ifdef CONFIG_CALIBRATE_DELAY
859 calibrate_delay(); /* Get our bogomips */
860 #endif
862 /* Save our processor parameters */
863 smp_store_cpu_info(cpu);
865 /* Allow the boot processor to continue */
866 cpumask_set_cpu(cpu, &cpu_callin_map);
870 * smp_online - Set cpu_online_mask
872 static void __init smp_online(void)
874 int cpu;
876 cpu = smp_processor_id();
878 local_irq_enable();
880 set_cpu_online(cpu, true);
881 smp_wmb();
885 * smp_cpus_done -
886 * @max_cpus: Maximum CPU count.
888 * Do nothing.
890 void __init smp_cpus_done(unsigned int max_cpus)
895 * smp_prepare_boot_cpu - Set up stuff for the boot processor.
897 * Set up the cpu_online_mask, cpu_callout_map and cpu_callin_map of the boot
898 * processor (CPU 0).
900 void __devinit smp_prepare_boot_cpu(void)
902 cpumask_set_cpu(0, &cpu_callout_map);
903 cpumask_set_cpu(0, &cpu_callin_map);
904 current_thread_info()->cpu = 0;
908 * initialize_secondary - Initialise a secondary CPU (Application Processor).
910 * Set SP register and jump to thread's PC address.
912 void initialize_secondary(void)
914 asm volatile (
915 "mov %0,sp \n"
916 "jmp (%1) \n"
918 : "a"(current->thread.sp), "a"(current->thread.pc));
922 * __cpu_up - Set smp_commenced_mask for the nominated CPU
923 * @cpu: The target CPU.
925 int __devinit __cpu_up(unsigned int cpu)
927 int timeout;
929 #ifdef CONFIG_HOTPLUG_CPU
930 if (num_online_cpus() == 1)
931 disable_hlt();
932 if (sleep_mode[cpu])
933 run_wakeup_cpu(cpu);
934 #endif /* CONFIG_HOTPLUG_CPU */
936 cpumask_set_cpu(cpu, &smp_commenced_mask);
938 /* Wait 5s total for a response */
939 for (timeout = 0 ; timeout < 5000 ; timeout++) {
940 if (cpu_online(cpu))
941 break;
942 udelay(1000);
945 BUG_ON(!cpu_online(cpu));
946 return 0;
950 * setup_profiling_timer - Set up the profiling timer
951 * @multiplier - The frequency multiplier to use
953 * The frequency of the profiling timer can be changed by writing a multiplier
954 * value into /proc/profile.
956 int setup_profiling_timer(unsigned int multiplier)
958 return -EINVAL;
962 * CPU hotplug routines
964 #ifdef CONFIG_HOTPLUG_CPU
966 static DEFINE_PER_CPU(struct cpu, cpu_devices);
968 static int __init topology_init(void)
970 int cpu, ret;
972 for_each_cpu(cpu) {
973 ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL);
974 if (ret)
975 printk(KERN_WARNING
976 "topology_init: register_cpu %d failed (%d)\n",
977 cpu, ret);
979 return 0;
982 subsys_initcall(topology_init);
984 int __cpu_disable(void)
986 int cpu = smp_processor_id();
987 if (cpu == 0)
988 return -EBUSY;
990 migrate_irqs();
991 cpumask_clear_cpu(cpu, &mm_cpumask(current->active_mm));
992 return 0;
995 void __cpu_die(unsigned int cpu)
997 run_sleep_cpu(cpu);
999 if (num_online_cpus() == 1)
1000 enable_hlt();
1003 #ifdef CONFIG_MN10300_CACHE_ENABLED
1004 static inline void hotplug_cpu_disable_cache(void)
1006 int tmp;
1007 asm volatile(
1008 " movhu (%1),%0 \n"
1009 " and %2,%0 \n"
1010 " movhu %0,(%1) \n"
1011 "1: movhu (%1),%0 \n"
1012 " btst %3,%0 \n"
1013 " bne 1b \n"
1014 : "=&r"(tmp)
1015 : "a"(&CHCTR),
1016 "i"(~(CHCTR_ICEN | CHCTR_DCEN)),
1017 "i"(CHCTR_ICBUSY | CHCTR_DCBUSY)
1018 : "memory", "cc");
1021 static inline void hotplug_cpu_enable_cache(void)
1023 int tmp;
1024 asm volatile(
1025 "movhu (%1),%0 \n"
1026 "or %2,%0 \n"
1027 "movhu %0,(%1) \n"
1028 : "=&r"(tmp)
1029 : "a"(&CHCTR),
1030 "i"(CHCTR_ICEN | CHCTR_DCEN)
1031 : "memory", "cc");
1034 static inline void hotplug_cpu_invalidate_cache(void)
1036 int tmp;
1037 asm volatile (
1038 "movhu (%1),%0 \n"
1039 "or %2,%0 \n"
1040 "movhu %0,(%1) \n"
1041 : "=&r"(tmp)
1042 : "a"(&CHCTR),
1043 "i"(CHCTR_ICINV | CHCTR_DCINV)
1044 : "cc");
1047 #else /* CONFIG_MN10300_CACHE_ENABLED */
1048 #define hotplug_cpu_disable_cache() do {} while (0)
1049 #define hotplug_cpu_enable_cache() do {} while (0)
1050 #define hotplug_cpu_invalidate_cache() do {} while (0)
1051 #endif /* CONFIG_MN10300_CACHE_ENABLED */
1054 * hotplug_cpu_nmi_call_function - Call a function on other CPUs for hotplug
1055 * @cpumask: List of target CPUs.
1056 * @func: The function to call on those CPUs.
1057 * @info: The context data for the function to be called.
1058 * @wait: Whether to wait for the calls to complete.
1060 * Non-maskably call a function on another CPU for hotplug purposes.
1062 * This function must be called with maskable interrupts disabled.
1064 static int hotplug_cpu_nmi_call_function(cpumask_t cpumask,
1065 smp_call_func_t func, void *info,
1066 int wait)
1069 * The address and the size of nmi_call_func_mask_data
1070 * need to be aligned on L1_CACHE_BYTES.
1072 static struct nmi_call_data_struct nmi_call_func_mask_data
1073 __cacheline_aligned;
1074 unsigned long start, end;
1076 start = (unsigned long)&nmi_call_func_mask_data;
1077 end = start + sizeof(struct nmi_call_data_struct);
1079 nmi_call_func_mask_data.func = func;
1080 nmi_call_func_mask_data.info = info;
1081 nmi_call_func_mask_data.started = cpumask;
1082 nmi_call_func_mask_data.wait = wait;
1083 if (wait)
1084 nmi_call_func_mask_data.finished = cpumask;
1086 spin_lock(&smp_nmi_call_lock);
1087 nmi_call_data = &nmi_call_func_mask_data;
1088 mn10300_local_dcache_flush_range(start, end);
1089 smp_wmb();
1091 send_IPI_mask(cpumask, CALL_FUNCTION_NMI_IPI);
1093 do {
1094 mn10300_local_dcache_inv_range(start, end);
1095 barrier();
1096 } while (!cpumask_empty(&nmi_call_func_mask_data.started));
1098 if (wait) {
1099 do {
1100 mn10300_local_dcache_inv_range(start, end);
1101 barrier();
1102 } while (!cpumask_empty(&nmi_call_func_mask_data.finished));
1105 spin_unlock(&smp_nmi_call_lock);
1106 return 0;
1109 static void restart_wakeup_cpu(void)
1111 unsigned int cpu = smp_processor_id();
1113 cpumask_set_cpu(cpu, &cpu_callin_map);
1114 local_flush_tlb();
1115 set_cpu_online(cpu, true);
1116 smp_wmb();
1119 static void prepare_sleep_cpu(void *unused)
1121 sleep_mode[smp_processor_id()] = 1;
1122 smp_mb();
1123 mn10300_local_dcache_flush_inv();
1124 hotplug_cpu_disable_cache();
1125 hotplug_cpu_invalidate_cache();
1128 /* when this function called, IE=0, NMID=0. */
1129 static void sleep_cpu(void *unused)
1131 unsigned int cpu_id = smp_processor_id();
1133 * CALL_FUNCTION_NMI_IPI for wakeup_cpu() shall not be requested,
1134 * before this cpu goes in SLEEP mode.
1136 do {
1137 smp_mb();
1138 __sleep_cpu();
1139 } while (sleep_mode[cpu_id]);
1140 restart_wakeup_cpu();
1143 static void run_sleep_cpu(unsigned int cpu)
1145 unsigned long flags;
1146 cpumask_t cpumask;
1148 cpumask_copy(&cpumask, &cpumask_of(cpu));
1149 flags = arch_local_cli_save();
1150 hotplug_cpu_nmi_call_function(cpumask, prepare_sleep_cpu, NULL, 1);
1151 hotplug_cpu_nmi_call_function(cpumask, sleep_cpu, NULL, 0);
1152 udelay(1); /* delay for the cpu to sleep. */
1153 arch_local_irq_restore(flags);
1156 static void wakeup_cpu(void)
1158 hotplug_cpu_invalidate_cache();
1159 hotplug_cpu_enable_cache();
1160 smp_mb();
1161 sleep_mode[smp_processor_id()] = 0;
1164 static void run_wakeup_cpu(unsigned int cpu)
1166 unsigned long flags;
1168 flags = arch_local_cli_save();
1169 #if NR_CPUS == 2
1170 mn10300_local_dcache_flush_inv();
1171 #else
1173 * Before waking up the cpu,
1174 * all online cpus should stop and flush D-Cache for global data.
1176 #error not support NR_CPUS > 2, when CONFIG_HOTPLUG_CPU=y.
1177 #endif
1178 hotplug_cpu_nmi_call_function(cpumask_of(cpu), wakeup_cpu, NULL, 1);
1179 arch_local_irq_restore(flags);
1182 #endif /* CONFIG_HOTPLUG_CPU */