[S390] kernel: Add z/VM LGR detection
[linux/fpc-iii.git] / arch / powerpc / oprofile / op_model_rs64.c
bloba20afe45d936639fc2061a02b948e016cae8ba92
1 /*
2 * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation; either version
7 * 2 of the License, or (at your option) any later version.
8 */
10 #include <linux/oprofile.h>
11 #include <linux/init.h>
12 #include <linux/smp.h>
13 #include <asm/ptrace.h>
14 #include <asm/system.h>
15 #include <asm/processor.h>
16 #include <asm/cputable.h>
17 #include <asm/oprofile_impl.h>
19 #define dbg(args...)
21 static void ctrl_write(unsigned int i, unsigned int val)
23 unsigned int tmp = 0;
24 unsigned long shift = 0, mask = 0;
26 dbg("ctrl_write %d %x\n", i, val);
28 switch(i) {
29 case 0:
30 tmp = mfspr(SPRN_MMCR0);
31 shift = 6;
32 mask = 0x7F;
33 break;
34 case 1:
35 tmp = mfspr(SPRN_MMCR0);
36 shift = 0;
37 mask = 0x3F;
38 break;
39 case 2:
40 tmp = mfspr(SPRN_MMCR1);
41 shift = 31 - 4;
42 mask = 0x1F;
43 break;
44 case 3:
45 tmp = mfspr(SPRN_MMCR1);
46 shift = 31 - 9;
47 mask = 0x1F;
48 break;
49 case 4:
50 tmp = mfspr(SPRN_MMCR1);
51 shift = 31 - 14;
52 mask = 0x1F;
53 break;
54 case 5:
55 tmp = mfspr(SPRN_MMCR1);
56 shift = 31 - 19;
57 mask = 0x1F;
58 break;
59 case 6:
60 tmp = mfspr(SPRN_MMCR1);
61 shift = 31 - 24;
62 mask = 0x1F;
63 break;
64 case 7:
65 tmp = mfspr(SPRN_MMCR1);
66 shift = 31 - 28;
67 mask = 0xF;
68 break;
71 tmp = tmp & ~(mask << shift);
72 tmp |= val << shift;
74 switch(i) {
75 case 0:
76 case 1:
77 mtspr(SPRN_MMCR0, tmp);
78 break;
79 default:
80 mtspr(SPRN_MMCR1, tmp);
83 dbg("ctrl_write mmcr0 %lx mmcr1 %lx\n", mfspr(SPRN_MMCR0),
84 mfspr(SPRN_MMCR1));
87 static unsigned long reset_value[OP_MAX_COUNTER];
89 static int num_counters;
91 static int rs64_reg_setup(struct op_counter_config *ctr,
92 struct op_system_config *sys,
93 int num_ctrs)
95 int i;
97 num_counters = num_ctrs;
99 for (i = 0; i < num_counters; ++i)
100 reset_value[i] = 0x80000000UL - ctr[i].count;
102 /* XXX setup user and kernel profiling */
103 return 0;
106 static int rs64_cpu_setup(struct op_counter_config *ctr)
108 unsigned int mmcr0;
110 /* reset MMCR0 and set the freeze bit */
111 mmcr0 = MMCR0_FC;
112 mtspr(SPRN_MMCR0, mmcr0);
114 /* reset MMCR1, MMCRA */
115 mtspr(SPRN_MMCR1, 0);
117 if (cpu_has_feature(CPU_FTR_MMCRA))
118 mtspr(SPRN_MMCRA, 0);
120 mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE;
121 /* Only applies to POWER3, but should be safe on RS64 */
122 mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE;
123 mtspr(SPRN_MMCR0, mmcr0);
125 dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(),
126 mfspr(SPRN_MMCR0));
127 dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(),
128 mfspr(SPRN_MMCR1));
130 return 0;
133 static int rs64_start(struct op_counter_config *ctr)
135 int i;
136 unsigned int mmcr0;
138 /* set the PMM bit (see comment below) */
139 mtmsrd(mfmsr() | MSR_PMM);
141 for (i = 0; i < num_counters; ++i) {
142 if (ctr[i].enabled) {
143 classic_ctr_write(i, reset_value[i]);
144 ctrl_write(i, ctr[i].event);
145 } else {
146 classic_ctr_write(i, 0);
150 mmcr0 = mfspr(SPRN_MMCR0);
153 * now clear the freeze bit, counting will not start until we
154 * rfid from this excetion, because only at that point will
155 * the PMM bit be cleared
157 mmcr0 &= ~MMCR0_FC;
158 mtspr(SPRN_MMCR0, mmcr0);
160 dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
161 return 0;
164 static void rs64_stop(void)
166 unsigned int mmcr0;
168 /* freeze counters */
169 mmcr0 = mfspr(SPRN_MMCR0);
170 mmcr0 |= MMCR0_FC;
171 mtspr(SPRN_MMCR0, mmcr0);
173 dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
175 mb();
178 static void rs64_handle_interrupt(struct pt_regs *regs,
179 struct op_counter_config *ctr)
181 unsigned int mmcr0;
182 int is_kernel;
183 int val;
184 int i;
185 unsigned long pc = mfspr(SPRN_SIAR);
187 is_kernel = is_kernel_addr(pc);
189 /* set the PMM bit (see comment below) */
190 mtmsrd(mfmsr() | MSR_PMM);
192 for (i = 0; i < num_counters; ++i) {
193 val = classic_ctr_read(i);
194 if (val < 0) {
195 if (ctr[i].enabled) {
196 oprofile_add_ext_sample(pc, regs, i, is_kernel);
197 classic_ctr_write(i, reset_value[i]);
198 } else {
199 classic_ctr_write(i, 0);
204 mmcr0 = mfspr(SPRN_MMCR0);
206 /* reset the perfmon trigger */
207 mmcr0 |= MMCR0_PMXE;
210 * now clear the freeze bit, counting will not start until we
211 * rfid from this exception, because only at that point will
212 * the PMM bit be cleared
214 mmcr0 &= ~MMCR0_FC;
215 mtspr(SPRN_MMCR0, mmcr0);
218 struct op_powerpc_model op_model_rs64 = {
219 .reg_setup = rs64_reg_setup,
220 .cpu_setup = rs64_cpu_setup,
221 .start = rs64_start,
222 .stop = rs64_stop,
223 .handle_interrupt = rs64_handle_interrupt,