kasan: stop tests being eliminated as dead code with FORTIFY_SOURCE
[linux/fpc-iii.git] / drivers / pwm / pwm-tiecap.c
blobab38c8203b790f3ac6ecac0bb7d60d47c4c84775
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * ECAP PWM driver
5 * Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/
6 */
8 #include <linux/module.h>
9 #include <linux/platform_device.h>
10 #include <linux/io.h>
11 #include <linux/err.h>
12 #include <linux/clk.h>
13 #include <linux/pm_runtime.h>
14 #include <linux/pwm.h>
15 #include <linux/of_device.h>
17 /* ECAP registers and bits definitions */
18 #define CAP1 0x08
19 #define CAP2 0x0C
20 #define CAP3 0x10
21 #define CAP4 0x14
22 #define ECCTL2 0x2A
23 #define ECCTL2_APWM_POL_LOW BIT(10)
24 #define ECCTL2_APWM_MODE BIT(9)
25 #define ECCTL2_SYNC_SEL_DISA (BIT(7) | BIT(6))
26 #define ECCTL2_TSCTR_FREERUN BIT(4)
28 struct ecap_context {
29 u32 cap3;
30 u32 cap4;
31 u16 ecctl2;
34 struct ecap_pwm_chip {
35 struct pwm_chip chip;
36 unsigned int clk_rate;
37 void __iomem *mmio_base;
38 struct ecap_context ctx;
41 static inline struct ecap_pwm_chip *to_ecap_pwm_chip(struct pwm_chip *chip)
43 return container_of(chip, struct ecap_pwm_chip, chip);
47 * period_ns = 10^9 * period_cycles / PWM_CLK_RATE
48 * duty_ns = 10^9 * duty_cycles / PWM_CLK_RATE
50 static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
51 int duty_ns, int period_ns)
53 struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
54 u32 period_cycles, duty_cycles;
55 unsigned long long c;
56 u16 value;
58 if (period_ns > NSEC_PER_SEC)
59 return -ERANGE;
61 c = pc->clk_rate;
62 c = c * period_ns;
63 do_div(c, NSEC_PER_SEC);
64 period_cycles = (u32)c;
66 if (period_cycles < 1) {
67 period_cycles = 1;
68 duty_cycles = 1;
69 } else {
70 c = pc->clk_rate;
71 c = c * duty_ns;
72 do_div(c, NSEC_PER_SEC);
73 duty_cycles = (u32)c;
76 pm_runtime_get_sync(pc->chip.dev);
78 value = readw(pc->mmio_base + ECCTL2);
80 /* Configure APWM mode & disable sync option */
81 value |= ECCTL2_APWM_MODE | ECCTL2_SYNC_SEL_DISA;
83 writew(value, pc->mmio_base + ECCTL2);
85 if (!pwm_is_enabled(pwm)) {
86 /* Update active registers if not running */
87 writel(duty_cycles, pc->mmio_base + CAP2);
88 writel(period_cycles, pc->mmio_base + CAP1);
89 } else {
91 * Update shadow registers to configure period and
92 * compare values. This helps current PWM period to
93 * complete on reconfiguring
95 writel(duty_cycles, pc->mmio_base + CAP4);
96 writel(period_cycles, pc->mmio_base + CAP3);
99 if (!pwm_is_enabled(pwm)) {
100 value = readw(pc->mmio_base + ECCTL2);
101 /* Disable APWM mode to put APWM output Low */
102 value &= ~ECCTL2_APWM_MODE;
103 writew(value, pc->mmio_base + ECCTL2);
106 pm_runtime_put_sync(pc->chip.dev);
108 return 0;
111 static int ecap_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
112 enum pwm_polarity polarity)
114 struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
115 u16 value;
117 pm_runtime_get_sync(pc->chip.dev);
119 value = readw(pc->mmio_base + ECCTL2);
121 if (polarity == PWM_POLARITY_INVERSED)
122 /* Duty cycle defines LOW period of PWM */
123 value |= ECCTL2_APWM_POL_LOW;
124 else
125 /* Duty cycle defines HIGH period of PWM */
126 value &= ~ECCTL2_APWM_POL_LOW;
128 writew(value, pc->mmio_base + ECCTL2);
130 pm_runtime_put_sync(pc->chip.dev);
132 return 0;
135 static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
137 struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
138 u16 value;
140 /* Leave clock enabled on enabling PWM */
141 pm_runtime_get_sync(pc->chip.dev);
144 * Enable 'Free run Time stamp counter mode' to start counter
145 * and 'APWM mode' to enable APWM output
147 value = readw(pc->mmio_base + ECCTL2);
148 value |= ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE;
149 writew(value, pc->mmio_base + ECCTL2);
151 return 0;
154 static void ecap_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
156 struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
157 u16 value;
160 * Disable 'Free run Time stamp counter mode' to stop counter
161 * and 'APWM mode' to put APWM output to low
163 value = readw(pc->mmio_base + ECCTL2);
164 value &= ~(ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE);
165 writew(value, pc->mmio_base + ECCTL2);
167 /* Disable clock on PWM disable */
168 pm_runtime_put_sync(pc->chip.dev);
171 static void ecap_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
173 if (pwm_is_enabled(pwm)) {
174 dev_warn(chip->dev, "Removing PWM device without disabling\n");
175 pm_runtime_put_sync(chip->dev);
179 static const struct pwm_ops ecap_pwm_ops = {
180 .free = ecap_pwm_free,
181 .config = ecap_pwm_config,
182 .set_polarity = ecap_pwm_set_polarity,
183 .enable = ecap_pwm_enable,
184 .disable = ecap_pwm_disable,
185 .owner = THIS_MODULE,
188 static const struct of_device_id ecap_of_match[] = {
189 { .compatible = "ti,am3352-ecap" },
190 { .compatible = "ti,am33xx-ecap" },
193 MODULE_DEVICE_TABLE(of, ecap_of_match);
195 static int ecap_pwm_probe(struct platform_device *pdev)
197 struct device_node *np = pdev->dev.of_node;
198 struct ecap_pwm_chip *pc;
199 struct resource *r;
200 struct clk *clk;
201 int ret;
203 pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
204 if (!pc)
205 return -ENOMEM;
207 clk = devm_clk_get(&pdev->dev, "fck");
208 if (IS_ERR(clk)) {
209 if (of_device_is_compatible(np, "ti,am33xx-ecap")) {
210 dev_warn(&pdev->dev, "Binding is obsolete.\n");
211 clk = devm_clk_get(pdev->dev.parent, "fck");
215 if (IS_ERR(clk)) {
216 dev_err(&pdev->dev, "failed to get clock\n");
217 return PTR_ERR(clk);
220 pc->clk_rate = clk_get_rate(clk);
221 if (!pc->clk_rate) {
222 dev_err(&pdev->dev, "failed to get clock rate\n");
223 return -EINVAL;
226 pc->chip.dev = &pdev->dev;
227 pc->chip.ops = &ecap_pwm_ops;
228 pc->chip.of_xlate = of_pwm_xlate_with_flags;
229 pc->chip.of_pwm_n_cells = 3;
230 pc->chip.base = -1;
231 pc->chip.npwm = 1;
233 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
234 pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
235 if (IS_ERR(pc->mmio_base))
236 return PTR_ERR(pc->mmio_base);
238 ret = pwmchip_add(&pc->chip);
239 if (ret < 0) {
240 dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
241 return ret;
244 platform_set_drvdata(pdev, pc);
245 pm_runtime_enable(&pdev->dev);
247 return 0;
250 static int ecap_pwm_remove(struct platform_device *pdev)
252 struct ecap_pwm_chip *pc = platform_get_drvdata(pdev);
254 pm_runtime_disable(&pdev->dev);
256 return pwmchip_remove(&pc->chip);
259 #ifdef CONFIG_PM_SLEEP
260 static void ecap_pwm_save_context(struct ecap_pwm_chip *pc)
262 pm_runtime_get_sync(pc->chip.dev);
263 pc->ctx.ecctl2 = readw(pc->mmio_base + ECCTL2);
264 pc->ctx.cap4 = readl(pc->mmio_base + CAP4);
265 pc->ctx.cap3 = readl(pc->mmio_base + CAP3);
266 pm_runtime_put_sync(pc->chip.dev);
269 static void ecap_pwm_restore_context(struct ecap_pwm_chip *pc)
271 writel(pc->ctx.cap3, pc->mmio_base + CAP3);
272 writel(pc->ctx.cap4, pc->mmio_base + CAP4);
273 writew(pc->ctx.ecctl2, pc->mmio_base + ECCTL2);
276 static int ecap_pwm_suspend(struct device *dev)
278 struct ecap_pwm_chip *pc = dev_get_drvdata(dev);
279 struct pwm_device *pwm = pc->chip.pwms;
281 ecap_pwm_save_context(pc);
283 /* Disable explicitly if PWM is running */
284 if (pwm_is_enabled(pwm))
285 pm_runtime_put_sync(dev);
287 return 0;
290 static int ecap_pwm_resume(struct device *dev)
292 struct ecap_pwm_chip *pc = dev_get_drvdata(dev);
293 struct pwm_device *pwm = pc->chip.pwms;
295 /* Enable explicitly if PWM was running */
296 if (pwm_is_enabled(pwm))
297 pm_runtime_get_sync(dev);
299 ecap_pwm_restore_context(pc);
300 return 0;
302 #endif
304 static SIMPLE_DEV_PM_OPS(ecap_pwm_pm_ops, ecap_pwm_suspend, ecap_pwm_resume);
306 static struct platform_driver ecap_pwm_driver = {
307 .driver = {
308 .name = "ecap",
309 .of_match_table = ecap_of_match,
310 .pm = &ecap_pwm_pm_ops,
312 .probe = ecap_pwm_probe,
313 .remove = ecap_pwm_remove,
315 module_platform_driver(ecap_pwm_driver);
317 MODULE_DESCRIPTION("ECAP PWM driver");
318 MODULE_AUTHOR("Texas Instruments");
319 MODULE_LICENSE("GPL");