drivers/leds/leds-an30259a.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // Driver for Panasonic AN30259A 3-channel LED driver
   4 //
   5 // Copyright (c) 2018 Simon Shields <simon@lineageos.org>
   6 //
   7 // Datasheet:
   8 // https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf
   9
  10 #include <linux/i2c.h>
  11 #include <linux/leds.h>
  12 #include <linux/module.h>
  13 #include <linux/mutex.h>
  14 #include <linux/of.h>
  15 #include <linux/regmap.h>
  16
  17 #define AN30259A_MAX_LEDS 3
  18
  19 #define AN30259A_REG_SRESET 0x00
  20 #define AN30259A_LED_SRESET BIT(0)
  21
  22 /* LED power registers */
  23 #define AN30259A_REG_LED_ON 0x01
  24 #define AN30259A_LED_EN(x) BIT((x) - 1)
  25 #define AN30259A_LED_SLOPE(x) BIT(((x) - 1) + 4)
  26
  27 #define AN30259A_REG_LEDCC(x) (0x03 + ((x) - 1))
  28
  29 /* slope control registers */
  30 #define AN30259A_REG_SLOPE(x) (0x06 + ((x) - 1))
  31 #define AN30259A_LED_SLOPETIME1(x) (x)
  32 #define AN30259A_LED_SLOPETIME2(x) ((x) << 4)
  33
  34 #define AN30259A_REG_LEDCNT1(x) (0x09 + (4 * ((x) - 1)))
  35 #define AN30259A_LED_DUTYMAX(x) ((x) << 4)
  36 #define AN30259A_LED_DUTYMID(x) (x)
  37
  38 #define AN30259A_REG_LEDCNT2(x) (0x0A + (4 * ((x) - 1)))
  39 #define AN30259A_LED_DELAY(x) ((x) << 4)
  40 #define AN30259A_LED_DUTYMIN(x) (x)
  41
  42 /* detention time control (length of each slope step) */
  43 #define AN30259A_REG_LEDCNT3(x) (0x0B + (4 * ((x) - 1)))
  44 #define AN30259A_LED_DT1(x) (x)
  45 #define AN30259A_LED_DT2(x) ((x) << 4)
  46
  47 #define AN30259A_REG_LEDCNT4(x) (0x0C + (4 * ((x) - 1)))
  48 #define AN30259A_LED_DT3(x) (x)
  49 #define AN30259A_LED_DT4(x) ((x) << 4)
  50
  51 #define AN30259A_REG_MAX 0x14
  52
  53 #define AN30259A_BLINK_MAX_TIME 7500 /* ms */
  54 #define AN30259A_SLOPE_RESOLUTION 500 /* ms */
  55
  56 #define AN30259A_NAME "an30259a"
  57
  58 #define STATE_OFF 0
  59 #define STATE_KEEP 1
  60 #define STATE_ON 2
  61
  62 struct an30259a;
  63
  64 struct an30259a_led {
  65         struct an30259a *chip;
  66         struct fwnode_handle *fwnode;
  67         struct led_classdev cdev;
  68         u32 num;
  69         u32 default_state;
  70         bool sloping;
  71 };
  72
  73 struct an30259a {
  74         struct mutex mutex; /* held when writing to registers */
  75         struct i2c_client *client;
  76         struct an30259a_led leds[AN30259A_MAX_LEDS];
  77         struct regmap *regmap;
  78         int num_leds;
  79 };
  80
  81 static int an30259a_brightness_set(struct led_classdev *cdev,
  82                                    enum led_brightness brightness)
  83 {
  84         struct an30259a_led *led;
  85         int ret;
  86         unsigned int led_on;
  87
  88         led = container_of(cdev, struct an30259a_led, cdev);
  89         mutex_lock(&led->chip->mutex);
  90
  91         ret = regmap_read(led->chip->regmap, AN30259A_REG_LED_ON, &led_on);
  92         if (ret)
  93                 goto error;
  94
  95         switch (brightness) {
  96         case LED_OFF:
  97                 led_on &= ~AN30259A_LED_EN(led->num);
  98                 led_on &= ~AN30259A_LED_SLOPE(led->num);
  99                 led->sloping = false;
 100                 break;
 101         default:
 102                 led_on |= AN30259A_LED_EN(led->num);
 103                 if (led->sloping)
 104                         led_on |= AN30259A_LED_SLOPE(led->num);
 105                 ret = regmap_write(led->chip->regmap,
 106                                    AN30259A_REG_LEDCNT1(led->num),
 107                                    AN30259A_LED_DUTYMAX(0xf) |
 108                                    AN30259A_LED_DUTYMID(0xf));
 109                 if (ret)
 110                         goto error;
 111                 break;
 112         }
 113
 114         ret = regmap_write(led->chip->regmap, AN30259A_REG_LED_ON, led_on);
 115         if (ret)
 116                 goto error;
 117
 118         ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCC(led->num),
 119                            brightness);
 120
 121 error:
 122         mutex_unlock(&led->chip->mutex);
 123
 124         return ret;
 125 }
 126
 127 static int an30259a_blink_set(struct led_classdev *cdev,
 128                               unsigned long *delay_off, unsigned long *delay_on)
 129 {
 130         struct an30259a_led *led;
 131         int ret, num;
 132         unsigned int led_on;
 133         unsigned long off = *delay_off, on = *delay_on;
 134
 135         led = container_of(cdev, struct an30259a_led, cdev);
 136
 137         mutex_lock(&led->chip->mutex);
 138         num = led->num;
 139
 140         /* slope time can only be a multiple of 500ms. */
 141         if (off % AN30259A_SLOPE_RESOLUTION || on % AN30259A_SLOPE_RESOLUTION) {
 142                 ret = -EINVAL;
 143                 goto error;
 144         }
 145
 146         /* up to a maximum of 7500ms. */
 147         if (off > AN30259A_BLINK_MAX_TIME || on > AN30259A_BLINK_MAX_TIME) {
 148                 ret = -EINVAL;
 149                 goto error;
 150         }
 151
 152         /* if no blink specified, default to 1 Hz. */
 153         if (!off && !on) {
 154                 *delay_off = off = 500;
 155                 *delay_on = on = 500;
 156         }
 157
 158         /* convert into values the HW will understand. */
 159         off /= AN30259A_SLOPE_RESOLUTION;
 160         on /= AN30259A_SLOPE_RESOLUTION;
 161
 162         /* duty min should be zero (=off), delay should be zero. */
 163         ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT2(num),
 164                            AN30259A_LED_DELAY(0) | AN30259A_LED_DUTYMIN(0));
 165         if (ret)
 166                 goto error;
 167
 168         /* reset detention time (no "breathing" effect). */
 169         ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT3(num),
 170                            AN30259A_LED_DT1(0) | AN30259A_LED_DT2(0));
 171         if (ret)
 172                 goto error;
 173         ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT4(num),
 174                            AN30259A_LED_DT3(0) | AN30259A_LED_DT4(0));
 175         if (ret)
 176                 goto error;
 177
 178         /* slope time controls on/off cycle length. */
 179         ret = regmap_write(led->chip->regmap, AN30259A_REG_SLOPE(num),
 180                            AN30259A_LED_SLOPETIME1(off) |
 181                            AN30259A_LED_SLOPETIME2(on));
 182         if (ret)
 183                 goto error;
 184
 185         /* Finally, enable slope mode. */
 186         ret = regmap_read(led->chip->regmap, AN30259A_REG_LED_ON, &led_on);
 187         if (ret)
 188                 goto error;
 189
 190         led_on |= AN30259A_LED_SLOPE(num) | AN30259A_LED_EN(led->num);
 191
 192         ret = regmap_write(led->chip->regmap, AN30259A_REG_LED_ON, led_on);
 193
 194         if (!ret)
 195                 led->sloping = true;
 196 error:
 197         mutex_unlock(&led->chip->mutex);
 198
 199         return ret;
 200 }
 201
 202 static int an30259a_dt_init(struct i2c_client *client,
 203                             struct an30259a *chip)
 204 {
 205         struct device_node *np = client->dev.of_node, *child;
 206         int count, ret;
 207         int i = 0;
 208         const char *str;
 209         struct an30259a_led *led;
 210
 211         count = of_get_child_count(np);
 212         if (!count || count > AN30259A_MAX_LEDS)
 213                 return -EINVAL;
 214
 215         for_each_available_child_of_node(np, child) {
 216                 u32 source;
 217
 218                 ret = of_property_read_u32(child, "reg", &source);
 219                 if (ret != 0 || !source || source > AN30259A_MAX_LEDS) {
 220                         dev_err(&client->dev, "Couldn't read LED address: %d\n",
 221                                 ret);
 222                         count--;
 223                         continue;
 224                 }
 225
 226                 led = &chip->leds[i];
 227
 228                 led->num = source;
 229                 led->chip = chip;
 230                 led->fwnode = of_fwnode_handle(child);
 231
 232                 if (!of_property_read_string(child, "default-state", &str)) {
 233                         if (!strcmp(str, "on"))
 234                                 led->default_state = STATE_ON;
 235                         else if (!strcmp(str, "keep"))
 236                                 led->default_state = STATE_KEEP;
 237                         else
 238                                 led->default_state = STATE_OFF;
 239                 }
 240
 241                 of_property_read_string(child, "linux,default-trigger",
 242                                         &led->cdev.default_trigger);
 243
 244                 i++;
 245         }
 246
 247         if (!count)
 248                 return -EINVAL;
 249
 250         chip->num_leds = i;
 251
 252         return 0;
 253 }
 254
 255 static const struct regmap_config an30259a_regmap_config = {
 256         .reg_bits = 8,
 257         .val_bits = 8,
 258         .max_register = AN30259A_REG_MAX,
 259 };
 260
 261 static void an30259a_init_default_state(struct an30259a_led *led)
 262 {
 263         struct an30259a *chip = led->chip;
 264         int led_on, err;
 265
 266         switch (led->default_state) {
 267         case STATE_ON:
 268                 led->cdev.brightness = LED_FULL;
 269                 break;
 270         case STATE_KEEP:
 271                 err = regmap_read(chip->regmap, AN30259A_REG_LED_ON, &led_on);
 272                 if (err)
 273                         break;
 274
 275                 if (!(led_on & AN30259A_LED_EN(led->num))) {
 276                         led->cdev.brightness = LED_OFF;
 277                         break;
 278                 }
 279                 regmap_read(chip->regmap, AN30259A_REG_LEDCC(led->num),
 280                             &led->cdev.brightness);
 281                 break;
 282         default:
 283                 led->cdev.brightness = LED_OFF;
 284         }
 285
 286         an30259a_brightness_set(&led->cdev, led->cdev.brightness);
 287 }
 288
 289 static int an30259a_probe(struct i2c_client *client)
 290 {
 291         struct an30259a *chip;
 292         int i, err;
 293
 294         chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
 295         if (!chip)
 296                 return -ENOMEM;
 297
 298         err = an30259a_dt_init(client, chip);
 299         if (err < 0)
 300                 return err;
 301
 302         mutex_init(&chip->mutex);
 303         chip->client = client;
 304         i2c_set_clientdata(client, chip);
 305
 306         chip->regmap = devm_regmap_init_i2c(client, &an30259a_regmap_config);
 307
 308         for (i = 0; i < chip->num_leds; i++) {
 309                 struct led_init_data init_data = {};
 310
 311                 an30259a_init_default_state(&chip->leds[i]);
 312                 chip->leds[i].cdev.brightness_set_blocking =
 313                         an30259a_brightness_set;
 314                 chip->leds[i].cdev.blink_set = an30259a_blink_set;
 315
 316                 init_data.fwnode = chip->leds[i].fwnode;
 317                 init_data.devicename = AN30259A_NAME;
 318                 init_data.default_label = ":";
 319
 320                 err = devm_led_classdev_register_ext(&client->dev,
 321                                                  &chip->leds[i].cdev,
 322                                                  &init_data);
 323                 if (err < 0)
 324                         goto exit;
 325         }
 326         return 0;
 327
 328 exit:
 329         mutex_destroy(&chip->mutex);
 330         return err;
 331 }
 332
 333 static int an30259a_remove(struct i2c_client *client)
 334 {
 335         struct an30259a *chip = i2c_get_clientdata(client);
 336
 337         mutex_destroy(&chip->mutex);
 338
 339         return 0;
 340 }
 341
 342 static const struct of_device_id an30259a_match_table[] = {
 343         { .compatible = "panasonic,an30259a", },
 344         { /* sentinel */ },
 345 };
 346
 347 MODULE_DEVICE_TABLE(of, an30259a_match_table);
 348
 349 static const struct i2c_device_id an30259a_id[] = {
 350         { "an30259a", 0 },
 351         { /* sentinel */ },
 352 };
 353 MODULE_DEVICE_TABLE(i2c, an30259a_id);
 354
 355 static struct i2c_driver an30259a_driver = {
 356         .driver = {
 357                 .name = "leds-an30259a",
 358                 .of_match_table = of_match_ptr(an30259a_match_table),
 359         },
 360         .probe_new = an30259a_probe,
 361         .remove = an30259a_remove,
 362         .id_table = an30259a_id,
 363 };
 364
 365 module_i2c_driver(an30259a_driver);
 366
 367 MODULE_AUTHOR("Simon Shields <simon@lineageos.org>");
 368 MODULE_DESCRIPTION("AN30259A LED driver");
 369 MODULE_LICENSE("GPL v2");