2 * Copyright (C) 2007-2013 Michal Simek <monstr@monstr.eu>
3 * Copyright (C) 2012-2013 Xilinx, Inc.
4 * Copyright (C) 2007-2009 PetaLogix
5 * Copyright (C) 2006 Atmark Techno, Inc.
7 * This file is subject to the terms and conditions of the GNU General Public
8 * License. See the file "COPYING" in the main directory of this archive
12 #include <linux/interrupt.h>
13 #include <linux/delay.h>
14 #include <linux/sched.h>
15 #include <linux/sched_clock.h>
16 #include <linux/clk.h>
17 #include <linux/clockchips.h>
18 #include <linux/of_address.h>
19 #include <linux/of_irq.h>
20 #include <linux/timecounter.h>
21 #include <asm/cpuinfo.h>
23 static void __iomem
*timer_baseaddr
;
25 static unsigned int freq_div_hz
;
26 static unsigned int timer_clock_freq
;
35 #define TCSR_MDT (1<<0)
36 #define TCSR_UDT (1<<1)
37 #define TCSR_GENT (1<<2)
38 #define TCSR_CAPT (1<<3)
39 #define TCSR_ARHT (1<<4)
40 #define TCSR_LOAD (1<<5)
41 #define TCSR_ENIT (1<<6)
42 #define TCSR_ENT (1<<7)
43 #define TCSR_TINT (1<<8)
44 #define TCSR_PWMA (1<<9)
45 #define TCSR_ENALL (1<<10)
47 static unsigned int (*read_fn
)(void __iomem
*);
48 static void (*write_fn
)(u32
, void __iomem
*);
50 static void timer_write32(u32 val
, void __iomem
*addr
)
55 static unsigned int timer_read32(void __iomem
*addr
)
57 return ioread32(addr
);
60 static void timer_write32_be(u32 val
, void __iomem
*addr
)
62 iowrite32be(val
, addr
);
65 static unsigned int timer_read32_be(void __iomem
*addr
)
67 return ioread32be(addr
);
70 static inline void xilinx_timer0_stop(void)
72 write_fn(read_fn(timer_baseaddr
+ TCSR0
) & ~TCSR_ENT
,
73 timer_baseaddr
+ TCSR0
);
76 static inline void xilinx_timer0_start_periodic(unsigned long load_val
)
80 /* loading value to timer reg */
81 write_fn(load_val
, timer_baseaddr
+ TLR0
);
83 /* load the initial value */
84 write_fn(TCSR_LOAD
, timer_baseaddr
+ TCSR0
);
86 /* see timer data sheet for detail
87 * !ENALL - don't enable 'em all
89 * TINT - clear interrupt status
90 * ENT- enable timer itself
91 * ENIT - enable interrupt
92 * !LOAD - clear the bit to let go
94 * !CAPT - no external trigger
95 * !GENT - no external signal
96 * UDT - set the timer as down counter
97 * !MDT0 - generate mode
99 write_fn(TCSR_TINT
|TCSR_ENIT
|TCSR_ENT
|TCSR_ARHT
|TCSR_UDT
,
100 timer_baseaddr
+ TCSR0
);
103 static inline void xilinx_timer0_start_oneshot(unsigned long load_val
)
107 /* loading value to timer reg */
108 write_fn(load_val
, timer_baseaddr
+ TLR0
);
110 /* load the initial value */
111 write_fn(TCSR_LOAD
, timer_baseaddr
+ TCSR0
);
113 write_fn(TCSR_TINT
|TCSR_ENIT
|TCSR_ENT
|TCSR_ARHT
|TCSR_UDT
,
114 timer_baseaddr
+ TCSR0
);
117 static int xilinx_timer_set_next_event(unsigned long delta
,
118 struct clock_event_device
*dev
)
120 pr_debug("%s: next event, delta %x\n", __func__
, (u32
)delta
);
121 xilinx_timer0_start_oneshot(delta
);
125 static int xilinx_timer_shutdown(struct clock_event_device
*evt
)
127 pr_info("%s\n", __func__
);
128 xilinx_timer0_stop();
132 static int xilinx_timer_set_periodic(struct clock_event_device
*evt
)
134 pr_info("%s\n", __func__
);
135 xilinx_timer0_start_periodic(freq_div_hz
);
139 static struct clock_event_device clockevent_xilinx_timer
= {
140 .name
= "xilinx_clockevent",
141 .features
= CLOCK_EVT_FEAT_ONESHOT
|
142 CLOCK_EVT_FEAT_PERIODIC
,
145 .set_next_event
= xilinx_timer_set_next_event
,
146 .set_state_shutdown
= xilinx_timer_shutdown
,
147 .set_state_periodic
= xilinx_timer_set_periodic
,
150 static inline void timer_ack(void)
152 write_fn(read_fn(timer_baseaddr
+ TCSR0
), timer_baseaddr
+ TCSR0
);
155 static irqreturn_t
timer_interrupt(int irq
, void *dev_id
)
157 struct clock_event_device
*evt
= &clockevent_xilinx_timer
;
158 #ifdef CONFIG_HEART_BEAT
159 microblaze_heartbeat();
162 evt
->event_handler(evt
);
166 static struct irqaction timer_irqaction
= {
167 .handler
= timer_interrupt
,
170 .dev_id
= &clockevent_xilinx_timer
,
173 static __init
int xilinx_clockevent_init(void)
175 clockevent_xilinx_timer
.mult
=
176 div_sc(timer_clock_freq
, NSEC_PER_SEC
,
177 clockevent_xilinx_timer
.shift
);
178 clockevent_xilinx_timer
.max_delta_ns
=
179 clockevent_delta2ns((u32
)~0, &clockevent_xilinx_timer
);
180 clockevent_xilinx_timer
.min_delta_ns
=
181 clockevent_delta2ns(1, &clockevent_xilinx_timer
);
182 clockevent_xilinx_timer
.cpumask
= cpumask_of(0);
183 clockevents_register_device(&clockevent_xilinx_timer
);
188 static u64
xilinx_clock_read(void)
190 return read_fn(timer_baseaddr
+ TCR1
);
193 static cycle_t
xilinx_read(struct clocksource
*cs
)
195 /* reading actual value of timer 1 */
196 return (cycle_t
)xilinx_clock_read();
199 static struct timecounter xilinx_tc
= {
203 static cycle_t
xilinx_cc_read(const struct cyclecounter
*cc
)
205 return xilinx_read(NULL
);
208 static struct cyclecounter xilinx_cc
= {
209 .read
= xilinx_cc_read
,
210 .mask
= CLOCKSOURCE_MASK(32),
214 static int __init
init_xilinx_timecounter(void)
216 xilinx_cc
.mult
= div_sc(timer_clock_freq
, NSEC_PER_SEC
,
219 timecounter_init(&xilinx_tc
, &xilinx_cc
, sched_clock());
224 static struct clocksource clocksource_microblaze
= {
225 .name
= "xilinx_clocksource",
228 .mask
= CLOCKSOURCE_MASK(32),
229 .flags
= CLOCK_SOURCE_IS_CONTINUOUS
,
232 static int __init
xilinx_clocksource_init(void)
236 ret
= clocksource_register_hz(&clocksource_microblaze
,
239 pr_err("failed to register clocksource");
244 write_fn(read_fn(timer_baseaddr
+ TCSR1
) & ~TCSR_ENT
,
245 timer_baseaddr
+ TCSR1
);
246 /* start timer1 - up counting without interrupt */
247 write_fn(TCSR_TINT
|TCSR_ENT
|TCSR_ARHT
, timer_baseaddr
+ TCSR1
);
249 /* register timecounter - for ftrace support */
250 return init_xilinx_timecounter();
253 static int __init
xilinx_timer_init(struct device_node
*timer
)
256 static int initialized
;
266 timer_baseaddr
= of_iomap(timer
, 0);
267 if (!timer_baseaddr
) {
268 pr_err("ERROR: invalid timer base address\n");
272 write_fn
= timer_write32
;
273 read_fn
= timer_read32
;
275 write_fn(TCSR_MDT
, timer_baseaddr
+ TCSR0
);
276 if (!(read_fn(timer_baseaddr
+ TCSR0
) & TCSR_MDT
)) {
277 write_fn
= timer_write32_be
;
278 read_fn
= timer_read32_be
;
281 irq
= irq_of_parse_and_map(timer
, 0);
283 pr_err("Failed to parse and map irq");
287 of_property_read_u32(timer
, "xlnx,one-timer-only", &timer_num
);
289 pr_err("Please enable two timers in HW\n");
293 pr_info("%s: irq=%d\n", timer
->full_name
, irq
);
295 clk
= of_clk_get(timer
, 0);
297 pr_err("ERROR: timer CCF input clock not found\n");
298 /* If there is clock-frequency property than use it */
299 of_property_read_u32(timer
, "clock-frequency",
302 timer_clock_freq
= clk_get_rate(clk
);
305 if (!timer_clock_freq
) {
306 pr_err("ERROR: Using CPU clock frequency\n");
307 timer_clock_freq
= cpuinfo
.cpu_clock_freq
;
310 freq_div_hz
= timer_clock_freq
/ HZ
;
312 ret
= setup_irq(irq
, &timer_irqaction
);
314 pr_err("Failed to setup IRQ");
318 #ifdef CONFIG_HEART_BEAT
319 microblaze_setup_heartbeat();
322 ret
= xilinx_clocksource_init();
326 ret
= xilinx_clockevent_init();
330 sched_clock_register(xilinx_clock_read
, 32, timer_clock_freq
);
335 CLOCKSOURCE_OF_DECLARE(xilinx_timer
, "xlnx,xps-timer-1.00.a",