drivers/media/dvb-frontends/sp2.c

   1 /*
   2  * CIMaX SP2/SP2HF (Atmel T90FJR) CI driver
   3  *
   4  * Copyright (C) 2014 Olli Salonen <olli.salonen@iki.fi>
   5  *
   6  * Heavily based on CIMax2(R) SP2 driver in conjunction with NetUp Dual
   7  * DVB-S2 CI card (cimax2) with following copyrights:
   8  *
   9  *  Copyright (C) 2009 NetUP Inc.
  10  *  Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
  11  *  Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
  12  *
  13  *    This program is free software; you can redistribute it and/or modify
  14  *    it under the terms of the GNU General Public License as published by
  15  *    the Free Software Foundation; either version 2 of the License, or
  16  *    (at your option) any later version.
  17  *
  18  *    This program is distributed in the hope that it will be useful,
  19  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  *    GNU General Public License for more details.
  22  */
  23
  24 #include "sp2_priv.h"
  25
  26 static int sp2_read_i2c(struct sp2 *s, u8 reg, u8 *buf, int len)
  27 {
  28         int ret;
  29         struct i2c_client *client = s->client;
  30         struct i2c_adapter *adap = client->adapter;
  31         struct i2c_msg msg[] = {
  32                 {
  33                         .addr = client->addr,
  34                         .flags = 0,
  35                         .buf = &reg,
  36                         .len = 1
  37                 }, {
  38                         .addr = client->addr,
  39                         .flags  = I2C_M_RD,
  40                         .buf = buf,
  41                         .len = len
  42                 }
  43         };
  44
  45         ret = i2c_transfer(adap, msg, 2);
  46
  47         if (ret != 2) {
  48                 dev_err(&client->dev, "i2c read error, reg = 0x%02x, status = %d\n",
  49                                 reg, ret);
  50                 if (ret < 0)
  51                         return ret;
  52                 else
  53                         return -EIO;
  54         }
  55
  56         dev_dbg(&s->client->dev, "addr=0x%04x, reg = 0x%02x, data = %02x\n",
  57                                 client->addr, reg, buf[0]);
  58
  59         return 0;
  60 }
  61
  62 static int sp2_write_i2c(struct sp2 *s, u8 reg, u8 *buf, int len)
  63 {
  64         int ret;
  65         u8 buffer[35];
  66         struct i2c_client *client = s->client;
  67         struct i2c_adapter *adap = client->adapter;
  68         struct i2c_msg msg = {
  69                 .addr = client->addr,
  70                 .flags = 0,
  71                 .buf = &buffer[0],
  72                 .len = len + 1
  73         };
  74
  75         if ((len + 1) > sizeof(buffer)) {
  76                 dev_err(&client->dev, "i2c wr reg=%02x: len=%d is too big!\n",
  77                                 reg, len);
  78                 return -EINVAL;
  79         }
  80
  81         buffer[0] = reg;
  82         memcpy(&buffer[1], buf, len);
  83
  84         ret = i2c_transfer(adap, &msg, 1);
  85
  86         if (ret != 1) {
  87                 dev_err(&client->dev, "i2c write error, reg = 0x%02x, status = %d\n",
  88                                 reg, ret);
  89                 if (ret < 0)
  90                         return ret;
  91                 else
  92                         return -EIO;
  93         }
  94
  95         dev_dbg(&s->client->dev, "addr=0x%04x, reg = 0x%02x, data = %*ph\n",
  96                                 client->addr, reg, len, buf);
  97
  98         return 0;
  99 }
 100
 101 static int sp2_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot, u8 acs,
 102                         u8 read, int addr, u8 data)
 103 {
 104         struct sp2 *s = en50221->data;
 105         u8 store;
 106         int mem, ret;
 107         int (*ci_op_cam)(void*, u8, int, u8, int*) = s->ci_control;
 108
 109         if (slot != 0)
 110                 return -EINVAL;
 111
 112         /*
 113          * change module access type between IO space and attribute memory
 114          * when needed
 115          */
 116         if (s->module_access_type != acs) {
 117                 ret = sp2_read_i2c(s, 0x00, &store, 1);
 118
 119                 if (ret)
 120                         return ret;
 121
 122                 store &= ~(SP2_MOD_CTL_ACS1 | SP2_MOD_CTL_ACS0);
 123                 store |= acs;
 124
 125                 ret = sp2_write_i2c(s, 0x00, &store, 1);
 126                 if (ret)
 127                         return ret;
 128         }
 129
 130         s->module_access_type = acs;
 131
 132         /* implementation of ci_op_cam is device specific */
 133         if (ci_op_cam) {
 134                 ret = ci_op_cam(s->priv, read, addr, data, &mem);
 135         } else {
 136                 dev_err(&s->client->dev, "callback not defined");
 137                 return -EINVAL;
 138         }
 139
 140         if (ret)
 141                 return ret;
 142
 143         dev_dbg(&s->client->dev, "%s: slot=%d, addr=0x%04x, %s, data=%x",
 144                         (read) ? "read" : "write", slot, addr,
 145                         (acs == SP2_CI_ATTR_ACS) ? "attr" : "io",
 146                         (read) ? mem : data);
 147
 148         if (read)
 149                 return mem;
 150         else
 151                 return 0;
 152
 153 }
 154
 155 int sp2_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221,
 156                                 int slot, int addr)
 157 {
 158         return sp2_ci_op_cam(en50221, slot, SP2_CI_ATTR_ACS,
 159                         SP2_CI_RD, addr, 0);
 160 }
 161
 162 int sp2_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221,
 163                                 int slot, int addr, u8 data)
 164 {
 165         return sp2_ci_op_cam(en50221, slot, SP2_CI_ATTR_ACS,
 166                         SP2_CI_WR, addr, data);
 167 }
 168
 169 int sp2_ci_read_cam_control(struct dvb_ca_en50221 *en50221,
 170                                 int slot, u8 addr)
 171 {
 172         return sp2_ci_op_cam(en50221, slot, SP2_CI_IO_ACS,
 173                         SP2_CI_RD, addr, 0);
 174 }
 175
 176 int sp2_ci_write_cam_control(struct dvb_ca_en50221 *en50221,
 177                                 int slot, u8 addr, u8 data)
 178 {
 179         return sp2_ci_op_cam(en50221, slot, SP2_CI_IO_ACS,
 180                         SP2_CI_WR, addr, data);
 181 }
 182
 183 int sp2_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
 184 {
 185         struct sp2 *s = en50221->data;
 186         u8 buf;
 187         int ret;
 188
 189         dev_dbg(&s->client->dev, "slot: %d\n", slot);
 190
 191         if (slot != 0)
 192                 return -EINVAL;
 193
 194         /* RST on */
 195         buf = SP2_MOD_CTL_RST;
 196         ret = sp2_write_i2c(s, 0x00, &buf, 1);
 197
 198         if (ret)
 199                 return ret;
 200
 201         usleep_range(500, 600);
 202
 203         /* RST off */
 204         buf = 0x00;
 205         ret = sp2_write_i2c(s, 0x00, &buf, 1);
 206
 207         if (ret)
 208                 return ret;
 209
 210         msleep(1000);
 211
 212         return 0;
 213 }
 214
 215 int sp2_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
 216 {
 217         struct sp2 *s = en50221->data;
 218
 219         dev_dbg(&s->client->dev, "slot:%d\n", slot);
 220
 221         /* not implemented */
 222         return 0;
 223 }
 224
 225 int sp2_ci_slot_ts_enable(struct dvb_ca_en50221 *en50221, int slot)
 226 {
 227         struct sp2 *s = en50221->data;
 228         u8 buf;
 229
 230         dev_dbg(&s->client->dev, "slot:%d\n", slot);
 231
 232         if (slot != 0)
 233                 return -EINVAL;
 234
 235         sp2_read_i2c(s, 0x00, &buf, 1);
 236
 237         /* disable bypass and enable TS */
 238         buf |= (SP2_MOD_CTL_TSOEN | SP2_MOD_CTL_TSIEN);
 239         return sp2_write_i2c(s, 0, &buf, 1);
 240 }
 241
 242 int sp2_ci_poll_slot_status(struct dvb_ca_en50221 *en50221,
 243                                 int slot, int open)
 244 {
 245         struct sp2 *s = en50221->data;
 246         u8 buf[2];
 247         int ret;
 248
 249         dev_dbg(&s->client->dev, "slot:%d open:%d\n", slot, open);
 250
 251         /*
 252          * CAM module INSERT/REMOVE processing. Slow operation because of i2c
 253          * transfers. Throttle read to one per sec.
 254          */
 255         if (time_after(jiffies, s->next_status_checked_time)) {
 256                 ret = sp2_read_i2c(s, 0x00, buf, 1);
 257                 s->next_status_checked_time = jiffies + msecs_to_jiffies(1000);
 258
 259                 if (ret)
 260                         return 0;
 261
 262                 if (buf[0] & SP2_MOD_CTL_DET)
 263                         s->status = DVB_CA_EN50221_POLL_CAM_PRESENT |
 264                                         DVB_CA_EN50221_POLL_CAM_READY;
 265                 else
 266                         s->status = 0;
 267         }
 268
 269         return s->status;
 270 }
 271
 272 static int sp2_init(struct sp2 *s)
 273 {
 274         int ret = 0;
 275         u8 buf;
 276         u8 cimax_init[34] = {
 277                 0x00, /* module A control*/
 278                 0x00, /* auto select mask high A */
 279                 0x00, /* auto select mask low A */
 280                 0x00, /* auto select pattern high A */
 281                 0x00, /* auto select pattern low A */
 282                 0x44, /* memory access time A, 600 ns */
 283                 0x00, /* invert input A */
 284                 0x00, /* RFU */
 285                 0x00, /* RFU */
 286                 0x00, /* module B control*/
 287                 0x00, /* auto select mask high B */
 288                 0x00, /* auto select mask low B */
 289                 0x00, /* auto select pattern high B */
 290                 0x00, /* auto select pattern low B */
 291                 0x44, /* memory access time B, 600 ns */
 292                 0x00, /* invert input B */
 293                 0x00, /* RFU */
 294                 0x00, /* RFU */
 295                 0x00, /* auto select mask high Ext */
 296                 0x00, /* auto select mask low Ext */
 297                 0x00, /* auto select pattern high Ext */
 298                 0x00, /* auto select pattern low Ext */
 299                 0x00, /* RFU */
 300                 0x02, /* destination - module A */
 301                 0x01, /* power control reg, VCC power on */
 302                 0x00, /* RFU */
 303                 0x00, /* int status read only */
 304                 0x00, /* Interrupt Mask Register */
 305                 0x05, /* EXTINT=active-high, INT=push-pull */
 306                 0x00, /* USCG1 */
 307                 0x04, /* ack active low */
 308                 0x00, /* LOCK = 0 */
 309                 0x22, /* unknown */
 310                 0x00, /* synchronization? */
 311         };
 312
 313         dev_dbg(&s->client->dev, "\n");
 314
 315         s->ca.owner = THIS_MODULE;
 316         s->ca.read_attribute_mem = sp2_ci_read_attribute_mem;
 317         s->ca.write_attribute_mem = sp2_ci_write_attribute_mem;
 318         s->ca.read_cam_control = sp2_ci_read_cam_control;
 319         s->ca.write_cam_control = sp2_ci_write_cam_control;
 320         s->ca.slot_reset = sp2_ci_slot_reset;
 321         s->ca.slot_shutdown = sp2_ci_slot_shutdown;
 322         s->ca.slot_ts_enable = sp2_ci_slot_ts_enable;
 323         s->ca.poll_slot_status = sp2_ci_poll_slot_status;
 324         s->ca.data = s;
 325         s->module_access_type = 0;
 326
 327         /* initialize all regs */
 328         ret = sp2_write_i2c(s, 0x00, &cimax_init[0], 34);
 329         if (ret)
 330                 goto err;
 331
 332         /* lock registers */
 333         buf = 1;
 334         ret = sp2_write_i2c(s, 0x1f, &buf, 1);
 335         if (ret)
 336                 goto err;
 337
 338         /* power on slots */
 339         ret = sp2_write_i2c(s, 0x18, &buf, 1);
 340         if (ret)
 341                 goto err;
 342
 343         ret = dvb_ca_en50221_init(s->dvb_adap, &s->ca, 0, 1);
 344         if (ret)
 345                 goto err;
 346
 347         return 0;
 348
 349 err:
 350         dev_dbg(&s->client->dev, "init failed=%d\n", ret);
 351         return ret;
 352 }
 353
 354 static int sp2_exit(struct i2c_client *client)
 355 {
 356         struct sp2 *s;
 357
 358         dev_dbg(&client->dev, "\n");
 359
 360         if (!client)
 361                 return 0;
 362
 363         s = i2c_get_clientdata(client);
 364         if (!s)
 365                 return 0;
 366
 367         if (!s->ca.data)
 368                 return 0;
 369
 370         dvb_ca_en50221_release(&s->ca);
 371
 372         return 0;
 373 }
 374
 375 static int sp2_probe(struct i2c_client *client,
 376                 const struct i2c_device_id *id)
 377 {
 378         struct sp2_config *cfg = client->dev.platform_data;
 379         struct sp2 *s;
 380         int ret;
 381
 382         dev_dbg(&client->dev, "\n");
 383
 384         s = kzalloc(sizeof(*s), GFP_KERNEL);
 385         if (!s) {
 386                 ret = -ENOMEM;
 387                 goto err;
 388         }
 389
 390         s->client = client;
 391         s->dvb_adap = cfg->dvb_adap;
 392         s->priv = cfg->priv;
 393         s->ci_control = cfg->ci_control;
 394
 395         i2c_set_clientdata(client, s);
 396
 397         ret = sp2_init(s);
 398         if (ret)
 399                 goto err;
 400
 401         dev_info(&s->client->dev, "CIMaX SP2 successfully attached\n");
 402         return 0;
 403 err:
 404         dev_dbg(&client->dev, "init failed=%d\n", ret);
 405         kfree(s);
 406
 407         return ret;
 408 }
 409
 410 static int sp2_remove(struct i2c_client *client)
 411 {
 412         struct sp2 *s = i2c_get_clientdata(client);
 413
 414         dev_dbg(&client->dev, "\n");
 415         sp2_exit(client);
 416         kfree(s);
 417         return 0;
 418 }
 419
 420 static const struct i2c_device_id sp2_id[] = {
 421         {"sp2", 0},
 422         {}
 423 };
 424 MODULE_DEVICE_TABLE(i2c, sp2_id);
 425
 426 static struct i2c_driver sp2_driver = {
 427         .driver = {
 428                 .name   = "sp2",
 429         },
 430         .probe          = sp2_probe,
 431         .remove         = sp2_remove,
 432         .id_table       = sp2_id,
 433 };
 434
 435 module_i2c_driver(sp2_driver);
 436
 437 MODULE_DESCRIPTION("CIMaX SP2/HF CI driver");
 438 MODULE_AUTHOR("Olli Salonen <olli.salonen@iki.fi>");
 439 MODULE_LICENSE("GPL");