2 * arch/sparc/math-emu/math.c
4 * Copyright (C) 1998 Peter Maydell (pmaydell@chiark.greenend.org.uk)
5 * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
6 * Copyright (C) 1999 David S. Miller (davem@redhat.com)
8 * This is a good place to start if you're trying to understand the
9 * emulation code, because it's pretty simple. What we do is
10 * essentially analyse the instruction to work out what the operation
11 * is and which registers are involved. We then execute the appropriate
12 * FXXXX function. [The floating point queue introduces a minor wrinkle;
14 * The fxxxxx.c files each emulate a single insn. They look relatively
15 * simple because the complexity is hidden away in an unholy tangle
16 * of preprocessor macros.
18 * The first layer of macros is single.h, double.h, quad.h. Generally
19 * these files define macros for working with floating point numbers
20 * of the three IEEE formats. FP_ADD_D(R,A,B) is for adding doubles,
21 * for instance. These macros are usually defined as calls to more
22 * generic macros (in this case _FP_ADD(D,2,R,X,Y) where the number
23 * of machine words required to store the given IEEE format is passed
24 * as a parameter. [double.h and co check the number of bits in a word
25 * and define FP_ADD_D & co appropriately].
26 * The generic macros are defined in op-common.h. This is where all
27 * the grotty stuff like handling NaNs is coded. To handle the possible
28 * word sizes macros in op-common.h use macros like _FP_FRAC_SLL_##wc()
29 * where wc is the 'number of machine words' parameter (here 2).
30 * These are defined in the third layer of macros: op-1.h, op-2.h
31 * and op-4.h. These handle operations on floating point numbers composed
32 * of 1,2 and 4 machine words respectively. [For example, on sparc64
33 * doubles are one machine word so macros in double.h eventually use
34 * constructs in op-1.h, but on sparc32 they use op-2.h definitions.]
35 * soft-fp.h is on the same level as op-common.h, and defines some
36 * macros which are independent of both word size and FP format.
37 * Finally, sfp-machine.h is the machine dependent part of the
38 * code: it defines the word size and what type a word is. It also
39 * defines how _FP_MUL_MEAT_t() maps to _FP_MUL_MEAT_n_* : op-n.h
40 * provide several possible flavours of multiply algorithm, most
41 * of which require that you supply some form of asm or C primitive to
42 * do the actual multiply. (such asm primitives should be defined
43 * in sfp-machine.h too). udivmodti4.c is the same sort of thing.
45 * There may be some errors here because I'm working from a
46 * SPARC architecture manual V9, and what I really want is V8...
47 * Also, the insns which can generate exceptions seem to be a
48 * greater subset of the FPops than for V9 (for example, FCMPED
49 * has to be emulated on V8). So I think I'm going to have
50 * to emulate them all just to be on the safe side...
52 * Emulation routines originate from soft-fp package, which is
53 * part of glibc and has appropriate copyrights in it (allegedly).
55 * NB: on sparc int == long == 4 bytes, long long == 8 bytes.
56 * Most bits of the kernel seem to go for long rather than int,
57 * so we follow that practice...
61 * fpsave() saves the FP queue but fpload() doesn't reload it.
62 * Therefore when we context switch or change FPU ownership
63 * we have to check to see if the queue had anything in it and
64 * emulate it if it did. This is going to be a pain.
67 #include <linux/types.h>
68 #include <linux/sched.h>
70 #include <asm/uaccess.h>
72 #include "sfp-util_32.h"
73 #include <math-emu/soft-fp.h>
74 #include <math-emu/single.h>
75 #include <math-emu/double.h>
76 #include <math-emu/quad.h>
78 #define FLOATFUNC(x) extern int x(void *,void *,void *)
80 /* The Vn labels indicate what version of the SPARC architecture gas thinks
81 * each insn is. This is from the binutils source :->
83 /* quadword instructions */
84 #define FSQRTQ 0x02b /* v8 */
85 #define FADDQ 0x043 /* v8 */
86 #define FSUBQ 0x047 /* v8 */
87 #define FMULQ 0x04b /* v8 */
88 #define FDIVQ 0x04f /* v8 */
89 #define FDMULQ 0x06e /* v8 */
90 #define FQTOS 0x0c7 /* v8 */
91 #define FQTOD 0x0cb /* v8 */
92 #define FITOQ 0x0cc /* v8 */
93 #define FSTOQ 0x0cd /* v8 */
94 #define FDTOQ 0x0ce /* v8 */
95 #define FQTOI 0x0d3 /* v8 */
96 #define FCMPQ 0x053 /* v8 */
97 #define FCMPEQ 0x057 /* v8 */
98 /* single/double instructions (subnormal): should all work */
99 #define FSQRTS 0x029 /* v7 */
100 #define FSQRTD 0x02a /* v7 */
101 #define FADDS 0x041 /* v6 */
102 #define FADDD 0x042 /* v6 */
103 #define FSUBS 0x045 /* v6 */
104 #define FSUBD 0x046 /* v6 */
105 #define FMULS 0x049 /* v6 */
106 #define FMULD 0x04a /* v6 */
107 #define FDIVS 0x04d /* v6 */
108 #define FDIVD 0x04e /* v6 */
109 #define FSMULD 0x069 /* v6 */
110 #define FDTOS 0x0c6 /* v6 */
111 #define FSTOD 0x0c9 /* v6 */
112 #define FSTOI 0x0d1 /* v6 */
113 #define FDTOI 0x0d2 /* v6 */
114 #define FABSS 0x009 /* v6 */
115 #define FCMPS 0x051 /* v6 */
116 #define FCMPES 0x055 /* v6 */
117 #define FCMPD 0x052 /* v6 */
118 #define FCMPED 0x056 /* v6 */
119 #define FMOVS 0x001 /* v6 */
120 #define FNEGS 0x005 /* v6 */
121 #define FITOS 0x0c4 /* v6 */
122 #define FITOD 0x0c8 /* v6 */
124 #define FSR_TEM_SHIFT 23UL
125 #define FSR_TEM_MASK (0x1fUL << FSR_TEM_SHIFT)
126 #define FSR_AEXC_SHIFT 5UL
127 #define FSR_AEXC_MASK (0x1fUL << FSR_AEXC_SHIFT)
128 #define FSR_CEXC_SHIFT 0UL
129 #define FSR_CEXC_MASK (0x1fUL << FSR_CEXC_SHIFT)
131 static int do_one_mathemu(u32 insn
, unsigned long *fsr
, unsigned long *fregs
);
133 /* Unlike the Sparc64 version (which has a struct fpustate), we
134 * pass the taskstruct corresponding to the task which currently owns the
135 * FPU. This is partly because we don't have the fpustate struct and
136 * partly because the task owning the FPU isn't always current (as is
137 * the case for the Sparc64 port). This is probably SMP-related...
138 * This function returns 1 if all queued insns were emulated successfully.
139 * The test for unimplemented FPop in kernel mode has been moved into
140 * kernel/traps.c for simplicity.
142 int do_mathemu(struct pt_regs
*regs
, struct task_struct
*fpt
)
144 /* regs->pc isn't necessarily the PC at which the offending insn is sitting.
145 * The FPU maintains a queue of FPops which cause traps.
146 * When it hits an instruction that requires that the trapped op succeeded
147 * (usually because it reads a reg. that the trapped op wrote) then it
148 * causes this exception. We need to emulate all the insns on the queue
149 * and then allow the op to proceed.
150 * This code should also handle the case where the trap was precise,
151 * in which case the queue length is zero and regs->pc points at the
152 * single FPop to be emulated. (this case is untested, though :->)
153 * You'll need this case if you want to be able to emulate all FPops
154 * because the FPU either doesn't exist or has been software-disabled.
155 * [The UltraSPARC makes FP a precise trap; this isn't as stupid as it
156 * might sound because the Ultra does funky things with a superscalar
160 /* You wouldn't believe how often I typed 'ftp' when I meant 'fpt' :-> */
163 int retcode
= 0; /* assume all succeed */
167 printk("In do_mathemu()... pc is %08lx\n", regs
->pc
);
168 printk("fpqdepth is %ld\n", fpt
->thread
.fpqdepth
);
169 for (i
= 0; i
< fpt
->thread
.fpqdepth
; i
++)
170 printk("%d: %08lx at %08lx\n", i
, fpt
->thread
.fpqueue
[i
].insn
,
171 (unsigned long)fpt
->thread
.fpqueue
[i
].insn_addr
);
174 if (fpt
->thread
.fpqdepth
== 0) { /* no queue, guilty insn is at regs->pc */
176 printk("precise trap at %08lx\n", regs
->pc
);
178 if (!get_user(insn
, (u32 __user
*) regs
->pc
)) {
179 retcode
= do_one_mathemu(insn
, &fpt
->thread
.fsr
, fpt
->thread
.float_regs
);
181 /* in this case we need to fix up PC & nPC */
182 regs
->pc
= regs
->npc
;
189 /* Normal case: need to empty the queue... */
190 for (i
= 0; i
< fpt
->thread
.fpqdepth
; i
++) {
191 retcode
= do_one_mathemu(fpt
->thread
.fpqueue
[i
].insn
, &(fpt
->thread
.fsr
), fpt
->thread
.float_regs
);
192 if (!retcode
) /* insn failed, no point doing any more */
195 /* Now empty the queue and clear the queue_not_empty flag */
197 fpt
->thread
.fsr
&= ~(0x3000 | FSR_CEXC_MASK
);
199 fpt
->thread
.fsr
&= ~0x3000;
200 fpt
->thread
.fpqdepth
= 0;
205 /* All routines returning an exception to raise should detect
206 * such exceptions _before_ rounding to be consistent with
207 * the behavior of the hardware in the implemented cases
208 * (and thus with the recommendations in the V9 architecture
211 * We return 0 if a SIGFPE should be sent, 1 otherwise.
213 static inline int record_exception(unsigned long *pfsr
, int eflag
)
215 unsigned long fsr
= *pfsr
;
218 /* Determine if this exception would have generated a trap. */
219 would_trap
= (fsr
& ((long)eflag
<< FSR_TEM_SHIFT
)) != 0UL;
221 /* If trapping, we only want to signal one bit. */
222 if (would_trap
!= 0) {
223 eflag
&= ((fsr
& FSR_TEM_MASK
) >> FSR_TEM_SHIFT
);
224 if ((eflag
& (eflag
- 1)) != 0) {
225 if (eflag
& FP_EX_INVALID
)
226 eflag
= FP_EX_INVALID
;
227 else if (eflag
& FP_EX_OVERFLOW
)
228 eflag
= FP_EX_OVERFLOW
;
229 else if (eflag
& FP_EX_UNDERFLOW
)
230 eflag
= FP_EX_UNDERFLOW
;
231 else if (eflag
& FP_EX_DIVZERO
)
232 eflag
= FP_EX_DIVZERO
;
233 else if (eflag
& FP_EX_INEXACT
)
234 eflag
= FP_EX_INEXACT
;
238 /* Set CEXC, here is the rule:
240 * In general all FPU ops will set one and only one
241 * bit in the CEXC field, this is always the case
242 * when the IEEE exception trap is enabled in TEM.
244 fsr
&= ~(FSR_CEXC_MASK
);
245 fsr
|= ((long)eflag
<< FSR_CEXC_SHIFT
);
247 /* Set the AEXC field, rule is:
249 * If a trap would not be generated, the
250 * CEXC just generated is OR'd into the
251 * existing value of AEXC.
254 fsr
|= ((long)eflag
<< FSR_AEXC_SHIFT
);
256 /* If trapping, indicate fault trap type IEEE. */
262 return (would_trap
? 0 : 1);
271 static int do_one_mathemu(u32 insn
, unsigned long *pfsr
, unsigned long *fregs
)
273 /* Emulate the given insn, updating fsr and fregs appropriately. */
275 /* r is rd, b is rs2 and a is rs1. The *u arg tells
276 whether the argument should be packed/unpacked (0 - do not unpack/pack, 1 - unpack/pack)
277 non-u args tells the size of the argument (0 - no argument, 1 - single, 2 - double, 3 - quad */
278 #define TYPE(dummy, r, ru, b, bu, a, au) type = (au << 2) | (a << 0) | (bu << 5) | (b << 3) | (ru << 8) | (r << 6)
280 argp rs1
= NULL
, rs2
= NULL
, rd
= NULL
;
282 FP_DECL_S(SA
); FP_DECL_S(SB
); FP_DECL_S(SR
);
283 FP_DECL_D(DA
); FP_DECL_D(DB
); FP_DECL_D(DR
);
284 FP_DECL_Q(QA
); FP_DECL_Q(QB
); FP_DECL_Q(QR
);
289 printk("In do_mathemu(), emulating %08lx\n", insn
);
292 if ((insn
& 0xc1f80000) == 0x81a00000) /* FPOP1 */ {
293 switch ((insn
>> 5) & 0x1ff) {
294 case FSQRTQ
: TYPE(3,3,1,3,1,0,0); break;
298 case FDIVQ
: TYPE(3,3,1,3,1,3,1); break;
299 case FDMULQ
: TYPE(3,3,1,2,1,2,1); break;
300 case FQTOS
: TYPE(3,1,1,3,1,0,0); break;
301 case FQTOD
: TYPE(3,2,1,3,1,0,0); break;
302 case FITOQ
: TYPE(3,3,1,1,0,0,0); break;
303 case FSTOQ
: TYPE(3,3,1,1,1,0,0); break;
304 case FDTOQ
: TYPE(3,3,1,2,1,0,0); break;
305 case FQTOI
: TYPE(3,1,0,3,1,0,0); break;
306 case FSQRTS
: TYPE(2,1,1,1,1,0,0); break;
307 case FSQRTD
: TYPE(2,2,1,2,1,0,0); break;
311 case FDIVD
: TYPE(2,2,1,2,1,2,1); break;
315 case FDIVS
: TYPE(2,1,1,1,1,1,1); break;
316 case FSMULD
: TYPE(2,2,1,1,1,1,1); break;
317 case FDTOS
: TYPE(2,1,1,2,1,0,0); break;
318 case FSTOD
: TYPE(2,2,1,1,1,0,0); break;
319 case FSTOI
: TYPE(2,1,0,1,1,0,0); break;
320 case FDTOI
: TYPE(2,1,0,2,1,0,0); break;
321 case FITOS
: TYPE(2,1,1,1,0,0,0); break;
322 case FITOD
: TYPE(2,2,1,1,0,0,0); break;
325 case FNEGS
: TYPE(2,1,0,1,0,0,0); break;
327 } else if ((insn
& 0xc1f80000) == 0x81a80000) /* FPOP2 */ {
328 switch ((insn
>> 5) & 0x1ff) {
329 case FCMPS
: TYPE(3,0,0,1,1,1,1); break;
330 case FCMPES
: TYPE(3,0,0,1,1,1,1); break;
331 case FCMPD
: TYPE(3,0,0,2,1,2,1); break;
332 case FCMPED
: TYPE(3,0,0,2,1,2,1); break;
333 case FCMPQ
: TYPE(3,0,0,3,1,3,1); break;
334 case FCMPEQ
: TYPE(3,0,0,3,1,3,1); break;
338 if (!type
) { /* oops, didn't recognise that FPop */
340 printk("attempt to emulate unrecognised FPop!\n");
345 /* Decode the registers to be used */
346 freg
= (*pfsr
>> 14) & 0xf;
348 *pfsr
&= ~0x1c000; /* clear the traptype bits */
350 freg
= ((insn
>> 14) & 0x1f);
351 switch (type
& 0x3) { /* is rs1 single, double or quad? */
353 if (freg
& 3) { /* quadwords must have bits 4&5 of the */
354 /* encoded reg. number set to zero. */
356 return 0; /* simulate invalid_fp_register exception */
360 if (freg
& 1) { /* doublewords must have bit 5 zeroed */
365 rs1
= (argp
)&fregs
[freg
];
366 switch (type
& 0x7) {
367 case 7: FP_UNPACK_QP (QA
, rs1
); break;
368 case 6: FP_UNPACK_DP (DA
, rs1
); break;
369 case 5: FP_UNPACK_SP (SA
, rs1
); break;
371 freg
= (insn
& 0x1f);
372 switch ((type
>> 3) & 0x3) { /* same again for rs2 */
374 if (freg
& 3) { /* quadwords must have bits 4&5 of the */
375 /* encoded reg. number set to zero. */
377 return 0; /* simulate invalid_fp_register exception */
381 if (freg
& 1) { /* doublewords must have bit 5 zeroed */
386 rs2
= (argp
)&fregs
[freg
];
387 switch ((type
>> 3) & 0x7) {
388 case 7: FP_UNPACK_QP (QB
, rs2
); break;
389 case 6: FP_UNPACK_DP (DB
, rs2
); break;
390 case 5: FP_UNPACK_SP (SB
, rs2
); break;
392 freg
= ((insn
>> 25) & 0x1f);
393 switch ((type
>> 6) & 0x3) { /* and finally rd. This one's a bit different */
394 case 0: /* dest is fcc. (this must be FCMPQ or FCMPEQ) */
395 if (freg
) { /* V8 has only one set of condition codes, so */
396 /* anything but 0 in the rd field is an error */
397 *pfsr
|= (6 << 14); /* (should probably flag as invalid opcode */
398 return 0; /* but SIGFPE will do :-> ) */
402 if (freg
& 3) { /* quadwords must have bits 4&5 of the */
403 /* encoded reg. number set to zero. */
405 return 0; /* simulate invalid_fp_register exception */
409 if (freg
& 1) { /* doublewords must have bit 5 zeroed */
415 rd
= (void *)&fregs
[freg
];
419 printk("executing insn...\n");
421 /* do the Right Thing */
422 switch ((insn
>> 5) & 0x1ff) {
424 case FADDS
: FP_ADD_S (SR
, SA
, SB
); break;
425 case FADDD
: FP_ADD_D (DR
, DA
, DB
); break;
426 case FADDQ
: FP_ADD_Q (QR
, QA
, QB
); break;
428 case FSUBS
: FP_SUB_S (SR
, SA
, SB
); break;
429 case FSUBD
: FP_SUB_D (DR
, DA
, DB
); break;
430 case FSUBQ
: FP_SUB_Q (QR
, QA
, QB
); break;
432 case FMULS
: FP_MUL_S (SR
, SA
, SB
); break;
433 case FSMULD
: FP_CONV (D
, S
, 2, 1, DA
, SA
);
434 FP_CONV (D
, S
, 2, 1, DB
, SB
);
435 case FMULD
: FP_MUL_D (DR
, DA
, DB
); break;
436 case FDMULQ
: FP_CONV (Q
, D
, 4, 2, QA
, DA
);
437 FP_CONV (Q
, D
, 4, 2, QB
, DB
);
438 case FMULQ
: FP_MUL_Q (QR
, QA
, QB
); break;
440 case FDIVS
: FP_DIV_S (SR
, SA
, SB
); break;
441 case FDIVD
: FP_DIV_D (DR
, DA
, DB
); break;
442 case FDIVQ
: FP_DIV_Q (QR
, QA
, QB
); break;
444 case FSQRTS
: FP_SQRT_S (SR
, SB
); break;
445 case FSQRTD
: FP_SQRT_D (DR
, DB
); break;
446 case FSQRTQ
: FP_SQRT_Q (QR
, QB
); break;
448 case FMOVS
: rd
->s
= rs2
->s
; break;
449 case FABSS
: rd
->s
= rs2
->s
& 0x7fffffff; break;
450 case FNEGS
: rd
->s
= rs2
->s
^ 0x80000000; break;
452 case FSTOI
: FP_TO_INT_S (IR
, SB
, 32, 1); break;
453 case FDTOI
: FP_TO_INT_D (IR
, DB
, 32, 1); break;
454 case FQTOI
: FP_TO_INT_Q (IR
, QB
, 32, 1); break;
456 case FITOS
: IR
= rs2
->s
; FP_FROM_INT_S (SR
, IR
, 32, int); break;
457 case FITOD
: IR
= rs2
->s
; FP_FROM_INT_D (DR
, IR
, 32, int); break;
458 case FITOQ
: IR
= rs2
->s
; FP_FROM_INT_Q (QR
, IR
, 32, int); break;
460 case FSTOD
: FP_CONV (D
, S
, 2, 1, DR
, SB
); break;
461 case FSTOQ
: FP_CONV (Q
, S
, 4, 1, QR
, SB
); break;
462 case FDTOQ
: FP_CONV (Q
, D
, 4, 2, QR
, DB
); break;
463 case FDTOS
: FP_CONV (S
, D
, 1, 2, SR
, DB
); break;
464 case FQTOS
: FP_CONV (S
, Q
, 1, 4, SR
, QB
); break;
465 case FQTOD
: FP_CONV (D
, Q
, 2, 4, DR
, QB
); break;
469 FP_CMP_S(IR
, SB
, SA
, 3);
471 (((insn
>> 5) & 0x1ff) == FCMPES
||
474 FP_SET_EXCEPTION (FP_EX_INVALID
);
478 FP_CMP_D(IR
, DB
, DA
, 3);
480 (((insn
>> 5) & 0x1ff) == FCMPED
||
483 FP_SET_EXCEPTION (FP_EX_INVALID
);
487 FP_CMP_Q(IR
, QB
, QA
, 3);
489 (((insn
>> 5) & 0x1ff) == FCMPEQ
||
492 FP_SET_EXCEPTION (FP_EX_INVALID
);
494 if (!FP_INHIBIT_RESULTS
) {
495 switch ((type
>> 6) & 0x7) {
497 if (IR
== -1) IR
= 2;
498 /* fcc is always fcc0 */
499 fsr
&= ~0xc00; fsr
|= (IR
<< 10); break;
502 case 1: rd
->s
= IR
; break;
503 case 5: FP_PACK_SP (rd
, SR
); break;
504 case 6: FP_PACK_DP (rd
, DR
); break;
505 case 7: FP_PACK_QP (rd
, QR
); break;
509 return 1; /* success! */
510 return record_exception(pfsr
, _fex
);