tcp: fix lockdep splat in tcp_snd_una_update()
[linux/fpc-iii.git] / drivers / scsi / qla2xxx / qla_sup.c
blob5e93923164252926f8ee9c34d78d74cae79716e1
1 /*
2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2014 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
6 */
7 #include "qla_def.h"
9 #include <linux/delay.h>
10 #include <linux/slab.h>
11 #include <linux/vmalloc.h>
12 #include <asm/uaccess.h>
15 * NVRAM support routines
18 /**
19 * qla2x00_lock_nvram_access() -
20 * @ha: HA context
22 static void
23 qla2x00_lock_nvram_access(struct qla_hw_data *ha)
25 uint16_t data;
26 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
28 if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
29 data = RD_REG_WORD(&reg->nvram);
30 while (data & NVR_BUSY) {
31 udelay(100);
32 data = RD_REG_WORD(&reg->nvram);
35 /* Lock resource */
36 WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0x1);
37 RD_REG_WORD(&reg->u.isp2300.host_semaphore);
38 udelay(5);
39 data = RD_REG_WORD(&reg->u.isp2300.host_semaphore);
40 while ((data & BIT_0) == 0) {
41 /* Lock failed */
42 udelay(100);
43 WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0x1);
44 RD_REG_WORD(&reg->u.isp2300.host_semaphore);
45 udelay(5);
46 data = RD_REG_WORD(&reg->u.isp2300.host_semaphore);
51 /**
52 * qla2x00_unlock_nvram_access() -
53 * @ha: HA context
55 static void
56 qla2x00_unlock_nvram_access(struct qla_hw_data *ha)
58 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
60 if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
61 WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0);
62 RD_REG_WORD(&reg->u.isp2300.host_semaphore);
66 /**
67 * qla2x00_nv_write() - Prepare for NVRAM read/write operation.
68 * @ha: HA context
69 * @data: Serial interface selector
71 static void
72 qla2x00_nv_write(struct qla_hw_data *ha, uint16_t data)
74 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
76 WRT_REG_WORD(&reg->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
77 RD_REG_WORD(&reg->nvram); /* PCI Posting. */
78 NVRAM_DELAY();
79 WRT_REG_WORD(&reg->nvram, data | NVR_SELECT | NVR_CLOCK |
80 NVR_WRT_ENABLE);
81 RD_REG_WORD(&reg->nvram); /* PCI Posting. */
82 NVRAM_DELAY();
83 WRT_REG_WORD(&reg->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
84 RD_REG_WORD(&reg->nvram); /* PCI Posting. */
85 NVRAM_DELAY();
88 /**
89 * qla2x00_nvram_request() - Sends read command to NVRAM and gets data from
90 * NVRAM.
91 * @ha: HA context
92 * @nv_cmd: NVRAM command
94 * Bit definitions for NVRAM command:
96 * Bit 26 = start bit
97 * Bit 25, 24 = opcode
98 * Bit 23-16 = address
99 * Bit 15-0 = write data
101 * Returns the word read from nvram @addr.
103 static uint16_t
104 qla2x00_nvram_request(struct qla_hw_data *ha, uint32_t nv_cmd)
106 uint8_t cnt;
107 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
108 uint16_t data = 0;
109 uint16_t reg_data;
111 /* Send command to NVRAM. */
112 nv_cmd <<= 5;
113 for (cnt = 0; cnt < 11; cnt++) {
114 if (nv_cmd & BIT_31)
115 qla2x00_nv_write(ha, NVR_DATA_OUT);
116 else
117 qla2x00_nv_write(ha, 0);
118 nv_cmd <<= 1;
121 /* Read data from NVRAM. */
122 for (cnt = 0; cnt < 16; cnt++) {
123 WRT_REG_WORD(&reg->nvram, NVR_SELECT | NVR_CLOCK);
124 RD_REG_WORD(&reg->nvram); /* PCI Posting. */
125 NVRAM_DELAY();
126 data <<= 1;
127 reg_data = RD_REG_WORD(&reg->nvram);
128 if (reg_data & NVR_DATA_IN)
129 data |= BIT_0;
130 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
131 RD_REG_WORD(&reg->nvram); /* PCI Posting. */
132 NVRAM_DELAY();
135 /* Deselect chip. */
136 WRT_REG_WORD(&reg->nvram, NVR_DESELECT);
137 RD_REG_WORD(&reg->nvram); /* PCI Posting. */
138 NVRAM_DELAY();
140 return data;
145 * qla2x00_get_nvram_word() - Calculates word position in NVRAM and calls the
146 * request routine to get the word from NVRAM.
147 * @ha: HA context
148 * @addr: Address in NVRAM to read
150 * Returns the word read from nvram @addr.
152 static uint16_t
153 qla2x00_get_nvram_word(struct qla_hw_data *ha, uint32_t addr)
155 uint16_t data;
156 uint32_t nv_cmd;
158 nv_cmd = addr << 16;
159 nv_cmd |= NV_READ_OP;
160 data = qla2x00_nvram_request(ha, nv_cmd);
162 return (data);
166 * qla2x00_nv_deselect() - Deselect NVRAM operations.
167 * @ha: HA context
169 static void
170 qla2x00_nv_deselect(struct qla_hw_data *ha)
172 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
174 WRT_REG_WORD(&reg->nvram, NVR_DESELECT);
175 RD_REG_WORD(&reg->nvram); /* PCI Posting. */
176 NVRAM_DELAY();
180 * qla2x00_write_nvram_word() - Write NVRAM data.
181 * @ha: HA context
182 * @addr: Address in NVRAM to write
183 * @data: word to program
185 static void
186 qla2x00_write_nvram_word(struct qla_hw_data *ha, uint32_t addr, uint16_t data)
188 int count;
189 uint16_t word;
190 uint32_t nv_cmd, wait_cnt;
191 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
192 scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
194 qla2x00_nv_write(ha, NVR_DATA_OUT);
195 qla2x00_nv_write(ha, 0);
196 qla2x00_nv_write(ha, 0);
198 for (word = 0; word < 8; word++)
199 qla2x00_nv_write(ha, NVR_DATA_OUT);
201 qla2x00_nv_deselect(ha);
203 /* Write data */
204 nv_cmd = (addr << 16) | NV_WRITE_OP;
205 nv_cmd |= data;
206 nv_cmd <<= 5;
207 for (count = 0; count < 27; count++) {
208 if (nv_cmd & BIT_31)
209 qla2x00_nv_write(ha, NVR_DATA_OUT);
210 else
211 qla2x00_nv_write(ha, 0);
213 nv_cmd <<= 1;
216 qla2x00_nv_deselect(ha);
218 /* Wait for NVRAM to become ready */
219 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
220 RD_REG_WORD(&reg->nvram); /* PCI Posting. */
221 wait_cnt = NVR_WAIT_CNT;
222 do {
223 if (!--wait_cnt) {
224 ql_dbg(ql_dbg_user, vha, 0x708d,
225 "NVRAM didn't go ready...\n");
226 break;
228 NVRAM_DELAY();
229 word = RD_REG_WORD(&reg->nvram);
230 } while ((word & NVR_DATA_IN) == 0);
232 qla2x00_nv_deselect(ha);
234 /* Disable writes */
235 qla2x00_nv_write(ha, NVR_DATA_OUT);
236 for (count = 0; count < 10; count++)
237 qla2x00_nv_write(ha, 0);
239 qla2x00_nv_deselect(ha);
242 static int
243 qla2x00_write_nvram_word_tmo(struct qla_hw_data *ha, uint32_t addr,
244 uint16_t data, uint32_t tmo)
246 int ret, count;
247 uint16_t word;
248 uint32_t nv_cmd;
249 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
251 ret = QLA_SUCCESS;
253 qla2x00_nv_write(ha, NVR_DATA_OUT);
254 qla2x00_nv_write(ha, 0);
255 qla2x00_nv_write(ha, 0);
257 for (word = 0; word < 8; word++)
258 qla2x00_nv_write(ha, NVR_DATA_OUT);
260 qla2x00_nv_deselect(ha);
262 /* Write data */
263 nv_cmd = (addr << 16) | NV_WRITE_OP;
264 nv_cmd |= data;
265 nv_cmd <<= 5;
266 for (count = 0; count < 27; count++) {
267 if (nv_cmd & BIT_31)
268 qla2x00_nv_write(ha, NVR_DATA_OUT);
269 else
270 qla2x00_nv_write(ha, 0);
272 nv_cmd <<= 1;
275 qla2x00_nv_deselect(ha);
277 /* Wait for NVRAM to become ready */
278 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
279 RD_REG_WORD(&reg->nvram); /* PCI Posting. */
280 do {
281 NVRAM_DELAY();
282 word = RD_REG_WORD(&reg->nvram);
283 if (!--tmo) {
284 ret = QLA_FUNCTION_FAILED;
285 break;
287 } while ((word & NVR_DATA_IN) == 0);
289 qla2x00_nv_deselect(ha);
291 /* Disable writes */
292 qla2x00_nv_write(ha, NVR_DATA_OUT);
293 for (count = 0; count < 10; count++)
294 qla2x00_nv_write(ha, 0);
296 qla2x00_nv_deselect(ha);
298 return ret;
302 * qla2x00_clear_nvram_protection() -
303 * @ha: HA context
305 static int
306 qla2x00_clear_nvram_protection(struct qla_hw_data *ha)
308 int ret, stat;
309 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
310 uint32_t word, wait_cnt;
311 uint16_t wprot, wprot_old;
312 scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
314 /* Clear NVRAM write protection. */
315 ret = QLA_FUNCTION_FAILED;
317 wprot_old = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base));
318 stat = qla2x00_write_nvram_word_tmo(ha, ha->nvram_base,
319 cpu_to_le16(0x1234), 100000);
320 wprot = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base));
321 if (stat != QLA_SUCCESS || wprot != 0x1234) {
322 /* Write enable. */
323 qla2x00_nv_write(ha, NVR_DATA_OUT);
324 qla2x00_nv_write(ha, 0);
325 qla2x00_nv_write(ha, 0);
326 for (word = 0; word < 8; word++)
327 qla2x00_nv_write(ha, NVR_DATA_OUT);
329 qla2x00_nv_deselect(ha);
331 /* Enable protection register. */
332 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
333 qla2x00_nv_write(ha, NVR_PR_ENABLE);
334 qla2x00_nv_write(ha, NVR_PR_ENABLE);
335 for (word = 0; word < 8; word++)
336 qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
338 qla2x00_nv_deselect(ha);
340 /* Clear protection register (ffff is cleared). */
341 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
342 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
343 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
344 for (word = 0; word < 8; word++)
345 qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
347 qla2x00_nv_deselect(ha);
349 /* Wait for NVRAM to become ready. */
350 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
351 RD_REG_WORD(&reg->nvram); /* PCI Posting. */
352 wait_cnt = NVR_WAIT_CNT;
353 do {
354 if (!--wait_cnt) {
355 ql_dbg(ql_dbg_user, vha, 0x708e,
356 "NVRAM didn't go ready...\n");
357 break;
359 NVRAM_DELAY();
360 word = RD_REG_WORD(&reg->nvram);
361 } while ((word & NVR_DATA_IN) == 0);
363 if (wait_cnt)
364 ret = QLA_SUCCESS;
365 } else
366 qla2x00_write_nvram_word(ha, ha->nvram_base, wprot_old);
368 return ret;
371 static void
372 qla2x00_set_nvram_protection(struct qla_hw_data *ha, int stat)
374 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
375 uint32_t word, wait_cnt;
376 scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
378 if (stat != QLA_SUCCESS)
379 return;
381 /* Set NVRAM write protection. */
382 /* Write enable. */
383 qla2x00_nv_write(ha, NVR_DATA_OUT);
384 qla2x00_nv_write(ha, 0);
385 qla2x00_nv_write(ha, 0);
386 for (word = 0; word < 8; word++)
387 qla2x00_nv_write(ha, NVR_DATA_OUT);
389 qla2x00_nv_deselect(ha);
391 /* Enable protection register. */
392 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
393 qla2x00_nv_write(ha, NVR_PR_ENABLE);
394 qla2x00_nv_write(ha, NVR_PR_ENABLE);
395 for (word = 0; word < 8; word++)
396 qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
398 qla2x00_nv_deselect(ha);
400 /* Enable protection register. */
401 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
402 qla2x00_nv_write(ha, NVR_PR_ENABLE);
403 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
404 for (word = 0; word < 8; word++)
405 qla2x00_nv_write(ha, NVR_PR_ENABLE);
407 qla2x00_nv_deselect(ha);
409 /* Wait for NVRAM to become ready. */
410 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
411 RD_REG_WORD(&reg->nvram); /* PCI Posting. */
412 wait_cnt = NVR_WAIT_CNT;
413 do {
414 if (!--wait_cnt) {
415 ql_dbg(ql_dbg_user, vha, 0x708f,
416 "NVRAM didn't go ready...\n");
417 break;
419 NVRAM_DELAY();
420 word = RD_REG_WORD(&reg->nvram);
421 } while ((word & NVR_DATA_IN) == 0);
425 /*****************************************************************************/
426 /* Flash Manipulation Routines */
427 /*****************************************************************************/
429 static inline uint32_t
430 flash_conf_addr(struct qla_hw_data *ha, uint32_t faddr)
432 return ha->flash_conf_off | faddr;
435 static inline uint32_t
436 flash_data_addr(struct qla_hw_data *ha, uint32_t faddr)
438 return ha->flash_data_off | faddr;
441 static inline uint32_t
442 nvram_conf_addr(struct qla_hw_data *ha, uint32_t naddr)
444 return ha->nvram_conf_off | naddr;
447 static inline uint32_t
448 nvram_data_addr(struct qla_hw_data *ha, uint32_t naddr)
450 return ha->nvram_data_off | naddr;
453 static uint32_t
454 qla24xx_read_flash_dword(struct qla_hw_data *ha, uint32_t addr)
456 int rval;
457 uint32_t cnt, data;
458 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
460 WRT_REG_DWORD(&reg->flash_addr, addr & ~FARX_DATA_FLAG);
461 /* Wait for READ cycle to complete. */
462 rval = QLA_SUCCESS;
463 for (cnt = 3000;
464 (RD_REG_DWORD(&reg->flash_addr) & FARX_DATA_FLAG) == 0 &&
465 rval == QLA_SUCCESS; cnt--) {
466 if (cnt)
467 udelay(10);
468 else
469 rval = QLA_FUNCTION_TIMEOUT;
470 cond_resched();
473 /* TODO: What happens if we time out? */
474 data = 0xDEADDEAD;
475 if (rval == QLA_SUCCESS)
476 data = RD_REG_DWORD(&reg->flash_data);
478 return data;
481 uint32_t *
482 qla24xx_read_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
483 uint32_t dwords)
485 uint32_t i;
486 struct qla_hw_data *ha = vha->hw;
488 /* Dword reads to flash. */
489 for (i = 0; i < dwords; i++, faddr++)
490 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
491 flash_data_addr(ha, faddr)));
493 return dwptr;
496 static int
497 qla24xx_write_flash_dword(struct qla_hw_data *ha, uint32_t addr, uint32_t data)
499 int rval;
500 uint32_t cnt;
501 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
503 WRT_REG_DWORD(&reg->flash_data, data);
504 RD_REG_DWORD(&reg->flash_data); /* PCI Posting. */
505 WRT_REG_DWORD(&reg->flash_addr, addr | FARX_DATA_FLAG);
506 /* Wait for Write cycle to complete. */
507 rval = QLA_SUCCESS;
508 for (cnt = 500000; (RD_REG_DWORD(&reg->flash_addr) & FARX_DATA_FLAG) &&
509 rval == QLA_SUCCESS; cnt--) {
510 if (cnt)
511 udelay(10);
512 else
513 rval = QLA_FUNCTION_TIMEOUT;
514 cond_resched();
516 return rval;
519 static void
520 qla24xx_get_flash_manufacturer(struct qla_hw_data *ha, uint8_t *man_id,
521 uint8_t *flash_id)
523 uint32_t ids;
525 ids = qla24xx_read_flash_dword(ha, flash_conf_addr(ha, 0x03ab));
526 *man_id = LSB(ids);
527 *flash_id = MSB(ids);
529 /* Check if man_id and flash_id are valid. */
530 if (ids != 0xDEADDEAD && (*man_id == 0 || *flash_id == 0)) {
531 /* Read information using 0x9f opcode
532 * Device ID, Mfg ID would be read in the format:
533 * <Ext Dev Info><Device ID Part2><Device ID Part 1><Mfg ID>
534 * Example: ATMEL 0x00 01 45 1F
535 * Extract MFG and Dev ID from last two bytes.
537 ids = qla24xx_read_flash_dword(ha, flash_conf_addr(ha, 0x009f));
538 *man_id = LSB(ids);
539 *flash_id = MSB(ids);
543 static int
544 qla2xxx_find_flt_start(scsi_qla_host_t *vha, uint32_t *start)
546 const char *loc, *locations[] = { "DEF", "PCI" };
547 uint32_t pcihdr, pcids;
548 uint32_t *dcode;
549 uint8_t *buf, *bcode, last_image;
550 uint16_t cnt, chksum, *wptr;
551 struct qla_flt_location *fltl;
552 struct qla_hw_data *ha = vha->hw;
553 struct req_que *req = ha->req_q_map[0];
556 * FLT-location structure resides after the last PCI region.
559 /* Begin with sane defaults. */
560 loc = locations[0];
561 *start = 0;
562 if (IS_QLA24XX_TYPE(ha))
563 *start = FA_FLASH_LAYOUT_ADDR_24;
564 else if (IS_QLA25XX(ha))
565 *start = FA_FLASH_LAYOUT_ADDR;
566 else if (IS_QLA81XX(ha))
567 *start = FA_FLASH_LAYOUT_ADDR_81;
568 else if (IS_P3P_TYPE(ha)) {
569 *start = FA_FLASH_LAYOUT_ADDR_82;
570 goto end;
571 } else if (IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
572 *start = FA_FLASH_LAYOUT_ADDR_83;
573 goto end;
575 /* Begin with first PCI expansion ROM header. */
576 buf = (uint8_t *)req->ring;
577 dcode = (uint32_t *)req->ring;
578 pcihdr = 0;
579 last_image = 1;
580 do {
581 /* Verify PCI expansion ROM header. */
582 qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, 0x20);
583 bcode = buf + (pcihdr % 4);
584 if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa)
585 goto end;
587 /* Locate PCI data structure. */
588 pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
589 qla24xx_read_flash_data(vha, dcode, pcids >> 2, 0x20);
590 bcode = buf + (pcihdr % 4);
592 /* Validate signature of PCI data structure. */
593 if (bcode[0x0] != 'P' || bcode[0x1] != 'C' ||
594 bcode[0x2] != 'I' || bcode[0x3] != 'R')
595 goto end;
597 last_image = bcode[0x15] & BIT_7;
599 /* Locate next PCI expansion ROM. */
600 pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
601 } while (!last_image);
603 /* Now verify FLT-location structure. */
604 fltl = (struct qla_flt_location *)req->ring;
605 qla24xx_read_flash_data(vha, dcode, pcihdr >> 2,
606 sizeof(struct qla_flt_location) >> 2);
607 if (fltl->sig[0] != 'Q' || fltl->sig[1] != 'F' ||
608 fltl->sig[2] != 'L' || fltl->sig[3] != 'T')
609 goto end;
611 wptr = (uint16_t *)req->ring;
612 cnt = sizeof(struct qla_flt_location) >> 1;
613 for (chksum = 0; cnt--; wptr++)
614 chksum += le16_to_cpu(*wptr);
615 if (chksum) {
616 ql_log(ql_log_fatal, vha, 0x0045,
617 "Inconsistent FLTL detected: checksum=0x%x.\n", chksum);
618 ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010e,
619 buf, sizeof(struct qla_flt_location));
620 return QLA_FUNCTION_FAILED;
623 /* Good data. Use specified location. */
624 loc = locations[1];
625 *start = (le16_to_cpu(fltl->start_hi) << 16 |
626 le16_to_cpu(fltl->start_lo)) >> 2;
627 end:
628 ql_dbg(ql_dbg_init, vha, 0x0046,
629 "FLTL[%s] = 0x%x.\n",
630 loc, *start);
631 return QLA_SUCCESS;
634 static void
635 qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
637 const char *loc, *locations[] = { "DEF", "FLT" };
638 const uint32_t def_fw[] =
639 { FA_RISC_CODE_ADDR, FA_RISC_CODE_ADDR, FA_RISC_CODE_ADDR_81 };
640 const uint32_t def_boot[] =
641 { FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR_81 };
642 const uint32_t def_vpd_nvram[] =
643 { FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR_81 };
644 const uint32_t def_vpd0[] =
645 { 0, 0, FA_VPD0_ADDR_81 };
646 const uint32_t def_vpd1[] =
647 { 0, 0, FA_VPD1_ADDR_81 };
648 const uint32_t def_nvram0[] =
649 { 0, 0, FA_NVRAM0_ADDR_81 };
650 const uint32_t def_nvram1[] =
651 { 0, 0, FA_NVRAM1_ADDR_81 };
652 const uint32_t def_fdt[] =
653 { FA_FLASH_DESCR_ADDR_24, FA_FLASH_DESCR_ADDR,
654 FA_FLASH_DESCR_ADDR_81 };
655 const uint32_t def_npiv_conf0[] =
656 { FA_NPIV_CONF0_ADDR_24, FA_NPIV_CONF0_ADDR,
657 FA_NPIV_CONF0_ADDR_81 };
658 const uint32_t def_npiv_conf1[] =
659 { FA_NPIV_CONF1_ADDR_24, FA_NPIV_CONF1_ADDR,
660 FA_NPIV_CONF1_ADDR_81 };
661 const uint32_t fcp_prio_cfg0[] =
662 { FA_FCP_PRIO0_ADDR, FA_FCP_PRIO0_ADDR_25,
663 0 };
664 const uint32_t fcp_prio_cfg1[] =
665 { FA_FCP_PRIO1_ADDR, FA_FCP_PRIO1_ADDR_25,
666 0 };
667 uint32_t def;
668 uint16_t *wptr;
669 uint16_t cnt, chksum;
670 uint32_t start;
671 struct qla_flt_header *flt;
672 struct qla_flt_region *region;
673 struct qla_hw_data *ha = vha->hw;
674 struct req_que *req = ha->req_q_map[0];
676 def = 0;
677 if (IS_QLA25XX(ha))
678 def = 1;
679 else if (IS_QLA81XX(ha))
680 def = 2;
682 /* Assign FCP prio region since older adapters may not have FLT, or
683 FCP prio region in it's FLT.
685 ha->flt_region_fcp_prio = (ha->port_no == 0) ?
686 fcp_prio_cfg0[def] : fcp_prio_cfg1[def];
688 ha->flt_region_flt = flt_addr;
689 wptr = (uint16_t *)req->ring;
690 flt = (struct qla_flt_header *)req->ring;
691 region = (struct qla_flt_region *)&flt[1];
692 ha->isp_ops->read_optrom(vha, (uint8_t *)req->ring,
693 flt_addr << 2, OPTROM_BURST_SIZE);
694 if (*wptr == cpu_to_le16(0xffff))
695 goto no_flash_data;
696 if (flt->version != cpu_to_le16(1)) {
697 ql_log(ql_log_warn, vha, 0x0047,
698 "Unsupported FLT detected: version=0x%x length=0x%x checksum=0x%x.\n",
699 le16_to_cpu(flt->version), le16_to_cpu(flt->length),
700 le16_to_cpu(flt->checksum));
701 goto no_flash_data;
704 cnt = (sizeof(struct qla_flt_header) + le16_to_cpu(flt->length)) >> 1;
705 for (chksum = 0; cnt--; wptr++)
706 chksum += le16_to_cpu(*wptr);
707 if (chksum) {
708 ql_log(ql_log_fatal, vha, 0x0048,
709 "Inconsistent FLT detected: version=0x%x length=0x%x checksum=0x%x.\n",
710 le16_to_cpu(flt->version), le16_to_cpu(flt->length),
711 le16_to_cpu(flt->checksum));
712 goto no_flash_data;
715 loc = locations[1];
716 cnt = le16_to_cpu(flt->length) / sizeof(struct qla_flt_region);
717 for ( ; cnt; cnt--, region++) {
718 /* Store addresses as DWORD offsets. */
719 start = le32_to_cpu(region->start) >> 2;
720 ql_dbg(ql_dbg_init, vha, 0x0049,
721 "FLT[%02x]: start=0x%x "
722 "end=0x%x size=0x%x.\n", le32_to_cpu(region->code) & 0xff,
723 start, le32_to_cpu(region->end) >> 2,
724 le32_to_cpu(region->size));
726 switch (le32_to_cpu(region->code) & 0xff) {
727 case FLT_REG_FCOE_FW:
728 if (!IS_QLA8031(ha))
729 break;
730 ha->flt_region_fw = start;
731 break;
732 case FLT_REG_FW:
733 if (IS_QLA8031(ha))
734 break;
735 ha->flt_region_fw = start;
736 break;
737 case FLT_REG_BOOT_CODE:
738 ha->flt_region_boot = start;
739 break;
740 case FLT_REG_VPD_0:
741 if (IS_QLA8031(ha))
742 break;
743 ha->flt_region_vpd_nvram = start;
744 if (IS_P3P_TYPE(ha))
745 break;
746 if (ha->port_no == 0)
747 ha->flt_region_vpd = start;
748 break;
749 case FLT_REG_VPD_1:
750 if (IS_P3P_TYPE(ha) || IS_QLA8031(ha))
751 break;
752 if (ha->port_no == 1)
753 ha->flt_region_vpd = start;
754 break;
755 case FLT_REG_VPD_2:
756 if (!IS_QLA27XX(ha))
757 break;
758 if (ha->port_no == 2)
759 ha->flt_region_vpd = start;
760 break;
761 case FLT_REG_VPD_3:
762 if (!IS_QLA27XX(ha))
763 break;
764 if (ha->port_no == 3)
765 ha->flt_region_vpd = start;
766 break;
767 case FLT_REG_NVRAM_0:
768 if (IS_QLA8031(ha))
769 break;
770 if (ha->port_no == 0)
771 ha->flt_region_nvram = start;
772 break;
773 case FLT_REG_NVRAM_1:
774 if (IS_QLA8031(ha))
775 break;
776 if (ha->port_no == 1)
777 ha->flt_region_nvram = start;
778 break;
779 case FLT_REG_NVRAM_2:
780 if (!IS_QLA27XX(ha))
781 break;
782 if (ha->port_no == 2)
783 ha->flt_region_nvram = start;
784 break;
785 case FLT_REG_NVRAM_3:
786 if (!IS_QLA27XX(ha))
787 break;
788 if (ha->port_no == 3)
789 ha->flt_region_nvram = start;
790 break;
791 case FLT_REG_FDT:
792 ha->flt_region_fdt = start;
793 break;
794 case FLT_REG_NPIV_CONF_0:
795 if (ha->port_no == 0)
796 ha->flt_region_npiv_conf = start;
797 break;
798 case FLT_REG_NPIV_CONF_1:
799 if (ha->port_no == 1)
800 ha->flt_region_npiv_conf = start;
801 break;
802 case FLT_REG_GOLD_FW:
803 ha->flt_region_gold_fw = start;
804 break;
805 case FLT_REG_FCP_PRIO_0:
806 if (ha->port_no == 0)
807 ha->flt_region_fcp_prio = start;
808 break;
809 case FLT_REG_FCP_PRIO_1:
810 if (ha->port_no == 1)
811 ha->flt_region_fcp_prio = start;
812 break;
813 case FLT_REG_BOOT_CODE_82XX:
814 ha->flt_region_boot = start;
815 break;
816 case FLT_REG_BOOT_CODE_8044:
817 if (IS_QLA8044(ha))
818 ha->flt_region_boot = start;
819 break;
820 case FLT_REG_FW_82XX:
821 ha->flt_region_fw = start;
822 break;
823 case FLT_REG_CNA_FW:
824 if (IS_CNA_CAPABLE(ha))
825 ha->flt_region_fw = start;
826 break;
827 case FLT_REG_GOLD_FW_82XX:
828 ha->flt_region_gold_fw = start;
829 break;
830 case FLT_REG_BOOTLOAD_82XX:
831 ha->flt_region_bootload = start;
832 break;
833 case FLT_REG_VPD_8XXX:
834 if (IS_CNA_CAPABLE(ha))
835 ha->flt_region_vpd = start;
836 break;
837 case FLT_REG_FCOE_NVRAM_0:
838 if (!(IS_QLA8031(ha) || IS_QLA8044(ha)))
839 break;
840 if (ha->port_no == 0)
841 ha->flt_region_nvram = start;
842 break;
843 case FLT_REG_FCOE_NVRAM_1:
844 if (!(IS_QLA8031(ha) || IS_QLA8044(ha)))
845 break;
846 if (ha->port_no == 1)
847 ha->flt_region_nvram = start;
848 break;
849 case FLT_REG_IMG_PRI_27XX:
850 if (IS_QLA27XX(ha))
851 ha->flt_region_img_status_pri = start;
852 break;
853 case FLT_REG_IMG_SEC_27XX:
854 if (IS_QLA27XX(ha))
855 ha->flt_region_img_status_sec = start;
856 break;
857 case FLT_REG_FW_SEC_27XX:
858 if (IS_QLA27XX(ha))
859 ha->flt_region_fw_sec = start;
860 break;
861 case FLT_REG_BOOTLOAD_SEC_27XX:
862 if (IS_QLA27XX(ha))
863 ha->flt_region_boot_sec = start;
864 break;
865 case FLT_REG_VPD_SEC_27XX_0:
866 if (IS_QLA27XX(ha))
867 ha->flt_region_vpd_sec = start;
868 break;
869 case FLT_REG_VPD_SEC_27XX_1:
870 if (IS_QLA27XX(ha))
871 ha->flt_region_vpd_sec = start;
872 break;
873 case FLT_REG_VPD_SEC_27XX_2:
874 if (IS_QLA27XX(ha))
875 ha->flt_region_vpd_sec = start;
876 break;
877 case FLT_REG_VPD_SEC_27XX_3:
878 if (IS_QLA27XX(ha))
879 ha->flt_region_vpd_sec = start;
880 break;
883 goto done;
885 no_flash_data:
886 /* Use hardcoded defaults. */
887 loc = locations[0];
888 ha->flt_region_fw = def_fw[def];
889 ha->flt_region_boot = def_boot[def];
890 ha->flt_region_vpd_nvram = def_vpd_nvram[def];
891 ha->flt_region_vpd = (ha->port_no == 0) ?
892 def_vpd0[def] : def_vpd1[def];
893 ha->flt_region_nvram = (ha->port_no == 0) ?
894 def_nvram0[def] : def_nvram1[def];
895 ha->flt_region_fdt = def_fdt[def];
896 ha->flt_region_npiv_conf = (ha->port_no == 0) ?
897 def_npiv_conf0[def] : def_npiv_conf1[def];
898 done:
899 ql_dbg(ql_dbg_init, vha, 0x004a,
900 "FLT[%s]: boot=0x%x fw=0x%x vpd_nvram=0x%x vpd=0x%x nvram=0x%x "
901 "fdt=0x%x flt=0x%x npiv=0x%x fcp_prif_cfg=0x%x.\n",
902 loc, ha->flt_region_boot, ha->flt_region_fw,
903 ha->flt_region_vpd_nvram, ha->flt_region_vpd, ha->flt_region_nvram,
904 ha->flt_region_fdt, ha->flt_region_flt, ha->flt_region_npiv_conf,
905 ha->flt_region_fcp_prio);
908 static void
909 qla2xxx_get_fdt_info(scsi_qla_host_t *vha)
911 #define FLASH_BLK_SIZE_4K 0x1000
912 #define FLASH_BLK_SIZE_32K 0x8000
913 #define FLASH_BLK_SIZE_64K 0x10000
914 const char *loc, *locations[] = { "MID", "FDT" };
915 uint16_t cnt, chksum;
916 uint16_t *wptr;
917 struct qla_fdt_layout *fdt;
918 uint8_t man_id, flash_id;
919 uint16_t mid = 0, fid = 0;
920 struct qla_hw_data *ha = vha->hw;
921 struct req_que *req = ha->req_q_map[0];
923 wptr = (uint16_t *)req->ring;
924 fdt = (struct qla_fdt_layout *)req->ring;
925 ha->isp_ops->read_optrom(vha, (uint8_t *)req->ring,
926 ha->flt_region_fdt << 2, OPTROM_BURST_SIZE);
927 if (*wptr == cpu_to_le16(0xffff))
928 goto no_flash_data;
929 if (fdt->sig[0] != 'Q' || fdt->sig[1] != 'L' || fdt->sig[2] != 'I' ||
930 fdt->sig[3] != 'D')
931 goto no_flash_data;
933 for (cnt = 0, chksum = 0; cnt < sizeof(*fdt) >> 1; cnt++, wptr++)
934 chksum += le16_to_cpu(*wptr);
935 if (chksum) {
936 ql_dbg(ql_dbg_init, vha, 0x004c,
937 "Inconsistent FDT detected:"
938 " checksum=0x%x id=%c version0x%x.\n", chksum,
939 fdt->sig[0], le16_to_cpu(fdt->version));
940 ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0113,
941 (uint8_t *)fdt, sizeof(*fdt));
942 goto no_flash_data;
945 loc = locations[1];
946 mid = le16_to_cpu(fdt->man_id);
947 fid = le16_to_cpu(fdt->id);
948 ha->fdt_wrt_disable = fdt->wrt_disable_bits;
949 ha->fdt_wrt_enable = fdt->wrt_enable_bits;
950 ha->fdt_wrt_sts_reg_cmd = fdt->wrt_sts_reg_cmd;
951 if (IS_QLA8044(ha))
952 ha->fdt_erase_cmd = fdt->erase_cmd;
953 else
954 ha->fdt_erase_cmd =
955 flash_conf_addr(ha, 0x0300 | fdt->erase_cmd);
956 ha->fdt_block_size = le32_to_cpu(fdt->block_size);
957 if (fdt->unprotect_sec_cmd) {
958 ha->fdt_unprotect_sec_cmd = flash_conf_addr(ha, 0x0300 |
959 fdt->unprotect_sec_cmd);
960 ha->fdt_protect_sec_cmd = fdt->protect_sec_cmd ?
961 flash_conf_addr(ha, 0x0300 | fdt->protect_sec_cmd):
962 flash_conf_addr(ha, 0x0336);
964 goto done;
965 no_flash_data:
966 loc = locations[0];
967 if (IS_P3P_TYPE(ha)) {
968 ha->fdt_block_size = FLASH_BLK_SIZE_64K;
969 goto done;
971 qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
972 mid = man_id;
973 fid = flash_id;
974 ha->fdt_wrt_disable = 0x9c;
975 ha->fdt_erase_cmd = flash_conf_addr(ha, 0x03d8);
976 switch (man_id) {
977 case 0xbf: /* STT flash. */
978 if (flash_id == 0x8e)
979 ha->fdt_block_size = FLASH_BLK_SIZE_64K;
980 else
981 ha->fdt_block_size = FLASH_BLK_SIZE_32K;
983 if (flash_id == 0x80)
984 ha->fdt_erase_cmd = flash_conf_addr(ha, 0x0352);
985 break;
986 case 0x13: /* ST M25P80. */
987 ha->fdt_block_size = FLASH_BLK_SIZE_64K;
988 break;
989 case 0x1f: /* Atmel 26DF081A. */
990 ha->fdt_block_size = FLASH_BLK_SIZE_4K;
991 ha->fdt_erase_cmd = flash_conf_addr(ha, 0x0320);
992 ha->fdt_unprotect_sec_cmd = flash_conf_addr(ha, 0x0339);
993 ha->fdt_protect_sec_cmd = flash_conf_addr(ha, 0x0336);
994 break;
995 default:
996 /* Default to 64 kb sector size. */
997 ha->fdt_block_size = FLASH_BLK_SIZE_64K;
998 break;
1000 done:
1001 ql_dbg(ql_dbg_init, vha, 0x004d,
1002 "FDT[%s]: (0x%x/0x%x) erase=0x%x "
1003 "pr=%x wrtd=0x%x blk=0x%x.\n",
1004 loc, mid, fid,
1005 ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd,
1006 ha->fdt_wrt_disable, ha->fdt_block_size);
1010 static void
1011 qla2xxx_get_idc_param(scsi_qla_host_t *vha)
1013 #define QLA82XX_IDC_PARAM_ADDR 0x003e885c
1014 uint32_t *wptr;
1015 struct qla_hw_data *ha = vha->hw;
1016 struct req_que *req = ha->req_q_map[0];
1018 if (!(IS_P3P_TYPE(ha)))
1019 return;
1021 wptr = (uint32_t *)req->ring;
1022 ha->isp_ops->read_optrom(vha, (uint8_t *)req->ring,
1023 QLA82XX_IDC_PARAM_ADDR , 8);
1025 if (*wptr == cpu_to_le32(0xffffffff)) {
1026 ha->fcoe_dev_init_timeout = QLA82XX_ROM_DEV_INIT_TIMEOUT;
1027 ha->fcoe_reset_timeout = QLA82XX_ROM_DRV_RESET_ACK_TIMEOUT;
1028 } else {
1029 ha->fcoe_dev_init_timeout = le32_to_cpu(*wptr);
1030 wptr++;
1031 ha->fcoe_reset_timeout = le32_to_cpu(*wptr);
1033 ql_dbg(ql_dbg_init, vha, 0x004e,
1034 "fcoe_dev_init_timeout=%d "
1035 "fcoe_reset_timeout=%d.\n", ha->fcoe_dev_init_timeout,
1036 ha->fcoe_reset_timeout);
1037 return;
1041 qla2xxx_get_flash_info(scsi_qla_host_t *vha)
1043 int ret;
1044 uint32_t flt_addr;
1045 struct qla_hw_data *ha = vha->hw;
1047 if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) &&
1048 !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha) && !IS_QLA27XX(ha))
1049 return QLA_SUCCESS;
1051 ret = qla2xxx_find_flt_start(vha, &flt_addr);
1052 if (ret != QLA_SUCCESS)
1053 return ret;
1055 qla2xxx_get_flt_info(vha, flt_addr);
1056 qla2xxx_get_fdt_info(vha);
1057 qla2xxx_get_idc_param(vha);
1059 return QLA_SUCCESS;
1062 void
1063 qla2xxx_flash_npiv_conf(scsi_qla_host_t *vha)
1065 #define NPIV_CONFIG_SIZE (16*1024)
1066 void *data;
1067 uint16_t *wptr;
1068 uint16_t cnt, chksum;
1069 int i;
1070 struct qla_npiv_header hdr;
1071 struct qla_npiv_entry *entry;
1072 struct qla_hw_data *ha = vha->hw;
1074 if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) &&
1075 !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha))
1076 return;
1078 if (ha->flags.nic_core_reset_hdlr_active)
1079 return;
1081 if (IS_QLA8044(ha))
1082 return;
1084 ha->isp_ops->read_optrom(vha, (uint8_t *)&hdr,
1085 ha->flt_region_npiv_conf << 2, sizeof(struct qla_npiv_header));
1086 if (hdr.version == cpu_to_le16(0xffff))
1087 return;
1088 if (hdr.version != cpu_to_le16(1)) {
1089 ql_dbg(ql_dbg_user, vha, 0x7090,
1090 "Unsupported NPIV-Config "
1091 "detected: version=0x%x entries=0x%x checksum=0x%x.\n",
1092 le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries),
1093 le16_to_cpu(hdr.checksum));
1094 return;
1097 data = kmalloc(NPIV_CONFIG_SIZE, GFP_KERNEL);
1098 if (!data) {
1099 ql_log(ql_log_warn, vha, 0x7091,
1100 "Unable to allocate memory for data.\n");
1101 return;
1104 ha->isp_ops->read_optrom(vha, (uint8_t *)data,
1105 ha->flt_region_npiv_conf << 2, NPIV_CONFIG_SIZE);
1107 cnt = (sizeof(hdr) + le16_to_cpu(hdr.entries) * sizeof(*entry)) >> 1;
1108 for (wptr = data, chksum = 0; cnt--; wptr++)
1109 chksum += le16_to_cpu(*wptr);
1110 if (chksum) {
1111 ql_dbg(ql_dbg_user, vha, 0x7092,
1112 "Inconsistent NPIV-Config "
1113 "detected: version=0x%x entries=0x%x checksum=0x%x.\n",
1114 le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries),
1115 le16_to_cpu(hdr.checksum));
1116 goto done;
1119 entry = data + sizeof(struct qla_npiv_header);
1120 cnt = le16_to_cpu(hdr.entries);
1121 for (i = 0; cnt; cnt--, entry++, i++) {
1122 uint16_t flags;
1123 struct fc_vport_identifiers vid;
1124 struct fc_vport *vport;
1126 memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry));
1128 flags = le16_to_cpu(entry->flags);
1129 if (flags == 0xffff)
1130 continue;
1131 if ((flags & BIT_0) == 0)
1132 continue;
1134 memset(&vid, 0, sizeof(vid));
1135 vid.roles = FC_PORT_ROLE_FCP_INITIATOR;
1136 vid.vport_type = FC_PORTTYPE_NPIV;
1137 vid.disable = false;
1138 vid.port_name = wwn_to_u64(entry->port_name);
1139 vid.node_name = wwn_to_u64(entry->node_name);
1141 ql_dbg(ql_dbg_user, vha, 0x7093,
1142 "NPIV[%02x]: wwpn=%llx "
1143 "wwnn=%llx vf_id=0x%x Q_qos=0x%x F_qos=0x%x.\n", cnt,
1144 (unsigned long long)vid.port_name,
1145 (unsigned long long)vid.node_name,
1146 le16_to_cpu(entry->vf_id),
1147 entry->q_qos, entry->f_qos);
1149 if (i < QLA_PRECONFIG_VPORTS) {
1150 vport = fc_vport_create(vha->host, 0, &vid);
1151 if (!vport)
1152 ql_log(ql_log_warn, vha, 0x7094,
1153 "NPIV-Config Failed to create vport [%02x]: "
1154 "wwpn=%llx wwnn=%llx.\n", cnt,
1155 (unsigned long long)vid.port_name,
1156 (unsigned long long)vid.node_name);
1159 done:
1160 kfree(data);
1163 static int
1164 qla24xx_unprotect_flash(scsi_qla_host_t *vha)
1166 struct qla_hw_data *ha = vha->hw;
1167 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1169 if (ha->flags.fac_supported)
1170 return qla81xx_fac_do_write_enable(vha, 1);
1172 /* Enable flash write. */
1173 WRT_REG_DWORD(&reg->ctrl_status,
1174 RD_REG_DWORD(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
1175 RD_REG_DWORD(&reg->ctrl_status); /* PCI Posting. */
1177 if (!ha->fdt_wrt_disable)
1178 goto done;
1180 /* Disable flash write-protection, first clear SR protection bit */
1181 qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
1182 /* Then write zero again to clear remaining SR bits.*/
1183 qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
1184 done:
1185 return QLA_SUCCESS;
1188 static int
1189 qla24xx_protect_flash(scsi_qla_host_t *vha)
1191 uint32_t cnt;
1192 struct qla_hw_data *ha = vha->hw;
1193 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1195 if (ha->flags.fac_supported)
1196 return qla81xx_fac_do_write_enable(vha, 0);
1198 if (!ha->fdt_wrt_disable)
1199 goto skip_wrt_protect;
1201 /* Enable flash write-protection and wait for completion. */
1202 qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101),
1203 ha->fdt_wrt_disable);
1204 for (cnt = 300; cnt &&
1205 qla24xx_read_flash_dword(ha, flash_conf_addr(ha, 0x005)) & BIT_0;
1206 cnt--) {
1207 udelay(10);
1210 skip_wrt_protect:
1211 /* Disable flash write. */
1212 WRT_REG_DWORD(&reg->ctrl_status,
1213 RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
1214 RD_REG_DWORD(&reg->ctrl_status); /* PCI Posting. */
1216 return QLA_SUCCESS;
1219 static int
1220 qla24xx_erase_sector(scsi_qla_host_t *vha, uint32_t fdata)
1222 struct qla_hw_data *ha = vha->hw;
1223 uint32_t start, finish;
1225 if (ha->flags.fac_supported) {
1226 start = fdata >> 2;
1227 finish = start + (ha->fdt_block_size >> 2) - 1;
1228 return qla81xx_fac_erase_sector(vha, flash_data_addr(ha,
1229 start), flash_data_addr(ha, finish));
1232 return qla24xx_write_flash_dword(ha, ha->fdt_erase_cmd,
1233 (fdata & 0xff00) | ((fdata << 16) & 0xff0000) |
1234 ((fdata >> 16) & 0xff));
1237 static int
1238 qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
1239 uint32_t dwords)
1241 int ret;
1242 uint32_t liter;
1243 uint32_t sec_mask, rest_addr;
1244 uint32_t fdata;
1245 dma_addr_t optrom_dma;
1246 void *optrom = NULL;
1247 struct qla_hw_data *ha = vha->hw;
1249 /* Prepare burst-capable write on supported ISPs. */
1250 if ((IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha) ||
1251 IS_QLA27XX(ha)) &&
1252 !(faddr & 0xfff) && dwords > OPTROM_BURST_DWORDS) {
1253 optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
1254 &optrom_dma, GFP_KERNEL);
1255 if (!optrom) {
1256 ql_log(ql_log_warn, vha, 0x7095,
1257 "Unable to allocate "
1258 "memory for optrom burst write (%x KB).\n",
1259 OPTROM_BURST_SIZE / 1024);
1263 rest_addr = (ha->fdt_block_size >> 2) - 1;
1264 sec_mask = ~rest_addr;
1266 ret = qla24xx_unprotect_flash(vha);
1267 if (ret != QLA_SUCCESS) {
1268 ql_log(ql_log_warn, vha, 0x7096,
1269 "Unable to unprotect flash for update.\n");
1270 goto done;
1273 for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
1274 fdata = (faddr & sec_mask) << 2;
1276 /* Are we at the beginning of a sector? */
1277 if ((faddr & rest_addr) == 0) {
1278 /* Do sector unprotect. */
1279 if (ha->fdt_unprotect_sec_cmd)
1280 qla24xx_write_flash_dword(ha,
1281 ha->fdt_unprotect_sec_cmd,
1282 (fdata & 0xff00) | ((fdata << 16) &
1283 0xff0000) | ((fdata >> 16) & 0xff));
1284 ret = qla24xx_erase_sector(vha, fdata);
1285 if (ret != QLA_SUCCESS) {
1286 ql_dbg(ql_dbg_user, vha, 0x7007,
1287 "Unable to erase erase sector: address=%x.\n",
1288 faddr);
1289 break;
1293 /* Go with burst-write. */
1294 if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) {
1295 /* Copy data to DMA'ble buffer. */
1296 memcpy(optrom, dwptr, OPTROM_BURST_SIZE);
1298 ret = qla2x00_load_ram(vha, optrom_dma,
1299 flash_data_addr(ha, faddr),
1300 OPTROM_BURST_DWORDS);
1301 if (ret != QLA_SUCCESS) {
1302 ql_log(ql_log_warn, vha, 0x7097,
1303 "Unable to burst-write optrom segment "
1304 "(%x/%x/%llx).\n", ret,
1305 flash_data_addr(ha, faddr),
1306 (unsigned long long)optrom_dma);
1307 ql_log(ql_log_warn, vha, 0x7098,
1308 "Reverting to slow-write.\n");
1310 dma_free_coherent(&ha->pdev->dev,
1311 OPTROM_BURST_SIZE, optrom, optrom_dma);
1312 optrom = NULL;
1313 } else {
1314 liter += OPTROM_BURST_DWORDS - 1;
1315 faddr += OPTROM_BURST_DWORDS - 1;
1316 dwptr += OPTROM_BURST_DWORDS - 1;
1317 continue;
1321 ret = qla24xx_write_flash_dword(ha,
1322 flash_data_addr(ha, faddr), cpu_to_le32(*dwptr));
1323 if (ret != QLA_SUCCESS) {
1324 ql_dbg(ql_dbg_user, vha, 0x7006,
1325 "Unable to program flash address=%x data=%x.\n",
1326 faddr, *dwptr);
1327 break;
1330 /* Do sector protect. */
1331 if (ha->fdt_unprotect_sec_cmd &&
1332 ((faddr & rest_addr) == rest_addr))
1333 qla24xx_write_flash_dword(ha,
1334 ha->fdt_protect_sec_cmd,
1335 (fdata & 0xff00) | ((fdata << 16) &
1336 0xff0000) | ((fdata >> 16) & 0xff));
1339 ret = qla24xx_protect_flash(vha);
1340 if (ret != QLA_SUCCESS)
1341 ql_log(ql_log_warn, vha, 0x7099,
1342 "Unable to protect flash after update.\n");
1343 done:
1344 if (optrom)
1345 dma_free_coherent(&ha->pdev->dev,
1346 OPTROM_BURST_SIZE, optrom, optrom_dma);
1348 return ret;
1351 uint8_t *
1352 qla2x00_read_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr,
1353 uint32_t bytes)
1355 uint32_t i;
1356 uint16_t *wptr;
1357 struct qla_hw_data *ha = vha->hw;
1359 /* Word reads to NVRAM via registers. */
1360 wptr = (uint16_t *)buf;
1361 qla2x00_lock_nvram_access(ha);
1362 for (i = 0; i < bytes >> 1; i++, naddr++)
1363 wptr[i] = cpu_to_le16(qla2x00_get_nvram_word(ha,
1364 naddr));
1365 qla2x00_unlock_nvram_access(ha);
1367 return buf;
1370 uint8_t *
1371 qla24xx_read_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr,
1372 uint32_t bytes)
1374 uint32_t i;
1375 uint32_t *dwptr;
1376 struct qla_hw_data *ha = vha->hw;
1378 if (IS_P3P_TYPE(ha))
1379 return buf;
1381 /* Dword reads to flash. */
1382 dwptr = (uint32_t *)buf;
1383 for (i = 0; i < bytes >> 2; i++, naddr++)
1384 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
1385 nvram_data_addr(ha, naddr)));
1387 return buf;
1391 qla2x00_write_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr,
1392 uint32_t bytes)
1394 int ret, stat;
1395 uint32_t i;
1396 uint16_t *wptr;
1397 unsigned long flags;
1398 struct qla_hw_data *ha = vha->hw;
1400 ret = QLA_SUCCESS;
1402 spin_lock_irqsave(&ha->hardware_lock, flags);
1403 qla2x00_lock_nvram_access(ha);
1405 /* Disable NVRAM write-protection. */
1406 stat = qla2x00_clear_nvram_protection(ha);
1408 wptr = (uint16_t *)buf;
1409 for (i = 0; i < bytes >> 1; i++, naddr++) {
1410 qla2x00_write_nvram_word(ha, naddr,
1411 cpu_to_le16(*wptr));
1412 wptr++;
1415 /* Enable NVRAM write-protection. */
1416 qla2x00_set_nvram_protection(ha, stat);
1418 qla2x00_unlock_nvram_access(ha);
1419 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1421 return ret;
1425 qla24xx_write_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr,
1426 uint32_t bytes)
1428 int ret;
1429 uint32_t i;
1430 uint32_t *dwptr;
1431 struct qla_hw_data *ha = vha->hw;
1432 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1434 ret = QLA_SUCCESS;
1436 if (IS_P3P_TYPE(ha))
1437 return ret;
1439 /* Enable flash write. */
1440 WRT_REG_DWORD(&reg->ctrl_status,
1441 RD_REG_DWORD(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
1442 RD_REG_DWORD(&reg->ctrl_status); /* PCI Posting. */
1444 /* Disable NVRAM write-protection. */
1445 qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0);
1446 qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0);
1448 /* Dword writes to flash. */
1449 dwptr = (uint32_t *)buf;
1450 for (i = 0; i < bytes >> 2; i++, naddr++, dwptr++) {
1451 ret = qla24xx_write_flash_dword(ha,
1452 nvram_data_addr(ha, naddr), cpu_to_le32(*dwptr));
1453 if (ret != QLA_SUCCESS) {
1454 ql_dbg(ql_dbg_user, vha, 0x709a,
1455 "Unable to program nvram address=%x data=%x.\n",
1456 naddr, *dwptr);
1457 break;
1461 /* Enable NVRAM write-protection. */
1462 qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0x8c);
1464 /* Disable flash write. */
1465 WRT_REG_DWORD(&reg->ctrl_status,
1466 RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
1467 RD_REG_DWORD(&reg->ctrl_status); /* PCI Posting. */
1469 return ret;
1472 uint8_t *
1473 qla25xx_read_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr,
1474 uint32_t bytes)
1476 uint32_t i;
1477 uint32_t *dwptr;
1478 struct qla_hw_data *ha = vha->hw;
1480 /* Dword reads to flash. */
1481 dwptr = (uint32_t *)buf;
1482 for (i = 0; i < bytes >> 2; i++, naddr++)
1483 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
1484 flash_data_addr(ha, ha->flt_region_vpd_nvram | naddr)));
1486 return buf;
1490 qla25xx_write_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr,
1491 uint32_t bytes)
1493 struct qla_hw_data *ha = vha->hw;
1494 #define RMW_BUFFER_SIZE (64 * 1024)
1495 uint8_t *dbuf;
1497 dbuf = vmalloc(RMW_BUFFER_SIZE);
1498 if (!dbuf)
1499 return QLA_MEMORY_ALLOC_FAILED;
1500 ha->isp_ops->read_optrom(vha, dbuf, ha->flt_region_vpd_nvram << 2,
1501 RMW_BUFFER_SIZE);
1502 memcpy(dbuf + (naddr << 2), buf, bytes);
1503 ha->isp_ops->write_optrom(vha, dbuf, ha->flt_region_vpd_nvram << 2,
1504 RMW_BUFFER_SIZE);
1505 vfree(dbuf);
1507 return QLA_SUCCESS;
1510 static inline void
1511 qla2x00_flip_colors(struct qla_hw_data *ha, uint16_t *pflags)
1513 if (IS_QLA2322(ha)) {
1514 /* Flip all colors. */
1515 if (ha->beacon_color_state == QLA_LED_ALL_ON) {
1516 /* Turn off. */
1517 ha->beacon_color_state = 0;
1518 *pflags = GPIO_LED_ALL_OFF;
1519 } else {
1520 /* Turn on. */
1521 ha->beacon_color_state = QLA_LED_ALL_ON;
1522 *pflags = GPIO_LED_RGA_ON;
1524 } else {
1525 /* Flip green led only. */
1526 if (ha->beacon_color_state == QLA_LED_GRN_ON) {
1527 /* Turn off. */
1528 ha->beacon_color_state = 0;
1529 *pflags = GPIO_LED_GREEN_OFF_AMBER_OFF;
1530 } else {
1531 /* Turn on. */
1532 ha->beacon_color_state = QLA_LED_GRN_ON;
1533 *pflags = GPIO_LED_GREEN_ON_AMBER_OFF;
1538 #define PIO_REG(h, r) ((h)->pio_address + offsetof(struct device_reg_2xxx, r))
1540 void
1541 qla2x00_beacon_blink(struct scsi_qla_host *vha)
1543 uint16_t gpio_enable;
1544 uint16_t gpio_data;
1545 uint16_t led_color = 0;
1546 unsigned long flags;
1547 struct qla_hw_data *ha = vha->hw;
1548 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1550 if (IS_P3P_TYPE(ha))
1551 return;
1553 spin_lock_irqsave(&ha->hardware_lock, flags);
1555 /* Save the Original GPIOE. */
1556 if (ha->pio_address) {
1557 gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe));
1558 gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod));
1559 } else {
1560 gpio_enable = RD_REG_WORD(&reg->gpioe);
1561 gpio_data = RD_REG_WORD(&reg->gpiod);
1564 /* Set the modified gpio_enable values */
1565 gpio_enable |= GPIO_LED_MASK;
1567 if (ha->pio_address) {
1568 WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable);
1569 } else {
1570 WRT_REG_WORD(&reg->gpioe, gpio_enable);
1571 RD_REG_WORD(&reg->gpioe);
1574 qla2x00_flip_colors(ha, &led_color);
1576 /* Clear out any previously set LED color. */
1577 gpio_data &= ~GPIO_LED_MASK;
1579 /* Set the new input LED color to GPIOD. */
1580 gpio_data |= led_color;
1582 /* Set the modified gpio_data values */
1583 if (ha->pio_address) {
1584 WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data);
1585 } else {
1586 WRT_REG_WORD(&reg->gpiod, gpio_data);
1587 RD_REG_WORD(&reg->gpiod);
1590 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1594 qla2x00_beacon_on(struct scsi_qla_host *vha)
1596 uint16_t gpio_enable;
1597 uint16_t gpio_data;
1598 unsigned long flags;
1599 struct qla_hw_data *ha = vha->hw;
1600 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1602 ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
1603 ha->fw_options[1] |= FO1_DISABLE_GPIO6_7;
1605 if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
1606 ql_log(ql_log_warn, vha, 0x709b,
1607 "Unable to update fw options (beacon on).\n");
1608 return QLA_FUNCTION_FAILED;
1611 /* Turn off LEDs. */
1612 spin_lock_irqsave(&ha->hardware_lock, flags);
1613 if (ha->pio_address) {
1614 gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe));
1615 gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod));
1616 } else {
1617 gpio_enable = RD_REG_WORD(&reg->gpioe);
1618 gpio_data = RD_REG_WORD(&reg->gpiod);
1620 gpio_enable |= GPIO_LED_MASK;
1622 /* Set the modified gpio_enable values. */
1623 if (ha->pio_address) {
1624 WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable);
1625 } else {
1626 WRT_REG_WORD(&reg->gpioe, gpio_enable);
1627 RD_REG_WORD(&reg->gpioe);
1630 /* Clear out previously set LED colour. */
1631 gpio_data &= ~GPIO_LED_MASK;
1632 if (ha->pio_address) {
1633 WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data);
1634 } else {
1635 WRT_REG_WORD(&reg->gpiod, gpio_data);
1636 RD_REG_WORD(&reg->gpiod);
1638 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1641 * Let the per HBA timer kick off the blinking process based on
1642 * the following flags. No need to do anything else now.
1644 ha->beacon_blink_led = 1;
1645 ha->beacon_color_state = 0;
1647 return QLA_SUCCESS;
1651 qla2x00_beacon_off(struct scsi_qla_host *vha)
1653 int rval = QLA_SUCCESS;
1654 struct qla_hw_data *ha = vha->hw;
1656 ha->beacon_blink_led = 0;
1658 /* Set the on flag so when it gets flipped it will be off. */
1659 if (IS_QLA2322(ha))
1660 ha->beacon_color_state = QLA_LED_ALL_ON;
1661 else
1662 ha->beacon_color_state = QLA_LED_GRN_ON;
1664 ha->isp_ops->beacon_blink(vha); /* This turns green LED off */
1666 ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
1667 ha->fw_options[1] &= ~FO1_DISABLE_GPIO6_7;
1669 rval = qla2x00_set_fw_options(vha, ha->fw_options);
1670 if (rval != QLA_SUCCESS)
1671 ql_log(ql_log_warn, vha, 0x709c,
1672 "Unable to update fw options (beacon off).\n");
1673 return rval;
1677 static inline void
1678 qla24xx_flip_colors(struct qla_hw_data *ha, uint16_t *pflags)
1680 /* Flip all colors. */
1681 if (ha->beacon_color_state == QLA_LED_ALL_ON) {
1682 /* Turn off. */
1683 ha->beacon_color_state = 0;
1684 *pflags = 0;
1685 } else {
1686 /* Turn on. */
1687 ha->beacon_color_state = QLA_LED_ALL_ON;
1688 *pflags = GPDX_LED_YELLOW_ON | GPDX_LED_AMBER_ON;
1692 void
1693 qla24xx_beacon_blink(struct scsi_qla_host *vha)
1695 uint16_t led_color = 0;
1696 uint32_t gpio_data;
1697 unsigned long flags;
1698 struct qla_hw_data *ha = vha->hw;
1699 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1701 /* Save the Original GPIOD. */
1702 spin_lock_irqsave(&ha->hardware_lock, flags);
1703 gpio_data = RD_REG_DWORD(&reg->gpiod);
1705 /* Enable the gpio_data reg for update. */
1706 gpio_data |= GPDX_LED_UPDATE_MASK;
1708 WRT_REG_DWORD(&reg->gpiod, gpio_data);
1709 gpio_data = RD_REG_DWORD(&reg->gpiod);
1711 /* Set the color bits. */
1712 qla24xx_flip_colors(ha, &led_color);
1714 /* Clear out any previously set LED color. */
1715 gpio_data &= ~GPDX_LED_COLOR_MASK;
1717 /* Set the new input LED color to GPIOD. */
1718 gpio_data |= led_color;
1720 /* Set the modified gpio_data values. */
1721 WRT_REG_DWORD(&reg->gpiod, gpio_data);
1722 gpio_data = RD_REG_DWORD(&reg->gpiod);
1723 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1726 static uint32_t
1727 qla83xx_select_led_port(struct qla_hw_data *ha)
1729 uint32_t led_select_value = 0;
1731 if (!IS_QLA83XX(ha) && !IS_QLA27XX(ha))
1732 goto out;
1734 if (ha->port_no == 0)
1735 led_select_value = QLA83XX_LED_PORT0;
1736 else
1737 led_select_value = QLA83XX_LED_PORT1;
1739 out:
1740 return led_select_value;
1743 void
1744 qla83xx_beacon_blink(struct scsi_qla_host *vha)
1746 uint32_t led_select_value;
1747 struct qla_hw_data *ha = vha->hw;
1748 uint16_t led_cfg[6];
1749 uint16_t orig_led_cfg[6];
1750 uint32_t led_10_value, led_43_value;
1752 if (!IS_QLA83XX(ha) && !IS_QLA81XX(ha) && !IS_QLA27XX(ha))
1753 return;
1755 if (!ha->beacon_blink_led)
1756 return;
1758 if (IS_QLA27XX(ha)) {
1759 qla2x00_write_ram_word(vha, 0x1003, 0x40000230);
1760 qla2x00_write_ram_word(vha, 0x1004, 0x40000230);
1761 } else if (IS_QLA2031(ha)) {
1762 led_select_value = qla83xx_select_led_port(ha);
1764 qla83xx_wr_reg(vha, led_select_value, 0x40000230);
1765 qla83xx_wr_reg(vha, led_select_value + 4, 0x40000230);
1766 } else if (IS_QLA8031(ha)) {
1767 led_select_value = qla83xx_select_led_port(ha);
1769 qla83xx_rd_reg(vha, led_select_value, &led_10_value);
1770 qla83xx_rd_reg(vha, led_select_value + 0x10, &led_43_value);
1771 qla83xx_wr_reg(vha, led_select_value, 0x01f44000);
1772 msleep(500);
1773 qla83xx_wr_reg(vha, led_select_value, 0x400001f4);
1774 msleep(1000);
1775 qla83xx_wr_reg(vha, led_select_value, led_10_value);
1776 qla83xx_wr_reg(vha, led_select_value + 0x10, led_43_value);
1777 } else if (IS_QLA81XX(ha)) {
1778 int rval;
1780 /* Save Current */
1781 rval = qla81xx_get_led_config(vha, orig_led_cfg);
1782 /* Do the blink */
1783 if (rval == QLA_SUCCESS) {
1784 if (IS_QLA81XX(ha)) {
1785 led_cfg[0] = 0x4000;
1786 led_cfg[1] = 0x2000;
1787 led_cfg[2] = 0;
1788 led_cfg[3] = 0;
1789 led_cfg[4] = 0;
1790 led_cfg[5] = 0;
1791 } else {
1792 led_cfg[0] = 0x4000;
1793 led_cfg[1] = 0x4000;
1794 led_cfg[2] = 0x4000;
1795 led_cfg[3] = 0x2000;
1796 led_cfg[4] = 0;
1797 led_cfg[5] = 0x2000;
1799 rval = qla81xx_set_led_config(vha, led_cfg);
1800 msleep(1000);
1801 if (IS_QLA81XX(ha)) {
1802 led_cfg[0] = 0x4000;
1803 led_cfg[1] = 0x2000;
1804 led_cfg[2] = 0;
1805 } else {
1806 led_cfg[0] = 0x4000;
1807 led_cfg[1] = 0x2000;
1808 led_cfg[2] = 0x4000;
1809 led_cfg[3] = 0x4000;
1810 led_cfg[4] = 0;
1811 led_cfg[5] = 0x2000;
1813 rval = qla81xx_set_led_config(vha, led_cfg);
1815 /* On exit, restore original (presumes no status change) */
1816 qla81xx_set_led_config(vha, orig_led_cfg);
1821 qla24xx_beacon_on(struct scsi_qla_host *vha)
1823 uint32_t gpio_data;
1824 unsigned long flags;
1825 struct qla_hw_data *ha = vha->hw;
1826 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1828 if (IS_P3P_TYPE(ha))
1829 return QLA_SUCCESS;
1831 if (IS_QLA8031(ha) || IS_QLA81XX(ha))
1832 goto skip_gpio; /* let blink handle it */
1834 if (ha->beacon_blink_led == 0) {
1835 /* Enable firmware for update */
1836 ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL;
1838 if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS)
1839 return QLA_FUNCTION_FAILED;
1841 if (qla2x00_get_fw_options(vha, ha->fw_options) !=
1842 QLA_SUCCESS) {
1843 ql_log(ql_log_warn, vha, 0x7009,
1844 "Unable to update fw options (beacon on).\n");
1845 return QLA_FUNCTION_FAILED;
1848 if (IS_QLA2031(ha) || IS_QLA27XX(ha))
1849 goto skip_gpio;
1851 spin_lock_irqsave(&ha->hardware_lock, flags);
1852 gpio_data = RD_REG_DWORD(&reg->gpiod);
1854 /* Enable the gpio_data reg for update. */
1855 gpio_data |= GPDX_LED_UPDATE_MASK;
1856 WRT_REG_DWORD(&reg->gpiod, gpio_data);
1857 RD_REG_DWORD(&reg->gpiod);
1859 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1862 /* So all colors blink together. */
1863 ha->beacon_color_state = 0;
1865 skip_gpio:
1866 /* Let the per HBA timer kick off the blinking process. */
1867 ha->beacon_blink_led = 1;
1869 return QLA_SUCCESS;
1873 qla24xx_beacon_off(struct scsi_qla_host *vha)
1875 uint32_t gpio_data;
1876 unsigned long flags;
1877 struct qla_hw_data *ha = vha->hw;
1878 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1880 if (IS_P3P_TYPE(ha))
1881 return QLA_SUCCESS;
1883 ha->beacon_blink_led = 0;
1885 if (IS_QLA2031(ha) || IS_QLA27XX(ha))
1886 goto set_fw_options;
1888 if (IS_QLA8031(ha) || IS_QLA81XX(ha))
1889 return QLA_SUCCESS;
1891 ha->beacon_color_state = QLA_LED_ALL_ON;
1893 ha->isp_ops->beacon_blink(vha); /* Will flip to all off. */
1895 /* Give control back to firmware. */
1896 spin_lock_irqsave(&ha->hardware_lock, flags);
1897 gpio_data = RD_REG_DWORD(&reg->gpiod);
1899 /* Disable the gpio_data reg for update. */
1900 gpio_data &= ~GPDX_LED_UPDATE_MASK;
1901 WRT_REG_DWORD(&reg->gpiod, gpio_data);
1902 RD_REG_DWORD(&reg->gpiod);
1903 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1905 set_fw_options:
1906 ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL;
1908 if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
1909 ql_log(ql_log_warn, vha, 0x704d,
1910 "Unable to update fw options (beacon on).\n");
1911 return QLA_FUNCTION_FAILED;
1914 if (qla2x00_get_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
1915 ql_log(ql_log_warn, vha, 0x704e,
1916 "Unable to update fw options (beacon on).\n");
1917 return QLA_FUNCTION_FAILED;
1920 return QLA_SUCCESS;
1925 * Flash support routines
1929 * qla2x00_flash_enable() - Setup flash for reading and writing.
1930 * @ha: HA context
1932 static void
1933 qla2x00_flash_enable(struct qla_hw_data *ha)
1935 uint16_t data;
1936 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1938 data = RD_REG_WORD(&reg->ctrl_status);
1939 data |= CSR_FLASH_ENABLE;
1940 WRT_REG_WORD(&reg->ctrl_status, data);
1941 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1945 * qla2x00_flash_disable() - Disable flash and allow RISC to run.
1946 * @ha: HA context
1948 static void
1949 qla2x00_flash_disable(struct qla_hw_data *ha)
1951 uint16_t data;
1952 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1954 data = RD_REG_WORD(&reg->ctrl_status);
1955 data &= ~(CSR_FLASH_ENABLE);
1956 WRT_REG_WORD(&reg->ctrl_status, data);
1957 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1961 * qla2x00_read_flash_byte() - Reads a byte from flash
1962 * @ha: HA context
1963 * @addr: Address in flash to read
1965 * A word is read from the chip, but, only the lower byte is valid.
1967 * Returns the byte read from flash @addr.
1969 static uint8_t
1970 qla2x00_read_flash_byte(struct qla_hw_data *ha, uint32_t addr)
1972 uint16_t data;
1973 uint16_t bank_select;
1974 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1976 bank_select = RD_REG_WORD(&reg->ctrl_status);
1978 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1979 /* Specify 64K address range: */
1980 /* clear out Module Select and Flash Address bits [19:16]. */
1981 bank_select &= ~0xf8;
1982 bank_select |= addr >> 12 & 0xf0;
1983 bank_select |= CSR_FLASH_64K_BANK;
1984 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1985 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1987 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1988 data = RD_REG_WORD(&reg->flash_data);
1990 return (uint8_t)data;
1993 /* Setup bit 16 of flash address. */
1994 if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
1995 bank_select |= CSR_FLASH_64K_BANK;
1996 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1997 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1998 } else if (((addr & BIT_16) == 0) &&
1999 (bank_select & CSR_FLASH_64K_BANK)) {
2000 bank_select &= ~(CSR_FLASH_64K_BANK);
2001 WRT_REG_WORD(&reg->ctrl_status, bank_select);
2002 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
2005 /* Always perform IO mapped accesses to the FLASH registers. */
2006 if (ha->pio_address) {
2007 uint16_t data2;
2009 WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr);
2010 do {
2011 data = RD_REG_WORD_PIO(PIO_REG(ha, flash_data));
2012 barrier();
2013 cpu_relax();
2014 data2 = RD_REG_WORD_PIO(PIO_REG(ha, flash_data));
2015 } while (data != data2);
2016 } else {
2017 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
2018 data = qla2x00_debounce_register(&reg->flash_data);
2021 return (uint8_t)data;
2025 * qla2x00_write_flash_byte() - Write a byte to flash
2026 * @ha: HA context
2027 * @addr: Address in flash to write
2028 * @data: Data to write
2030 static void
2031 qla2x00_write_flash_byte(struct qla_hw_data *ha, uint32_t addr, uint8_t data)
2033 uint16_t bank_select;
2034 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
2036 bank_select = RD_REG_WORD(&reg->ctrl_status);
2037 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
2038 /* Specify 64K address range: */
2039 /* clear out Module Select and Flash Address bits [19:16]. */
2040 bank_select &= ~0xf8;
2041 bank_select |= addr >> 12 & 0xf0;
2042 bank_select |= CSR_FLASH_64K_BANK;
2043 WRT_REG_WORD(&reg->ctrl_status, bank_select);
2044 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
2046 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
2047 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
2048 WRT_REG_WORD(&reg->flash_data, (uint16_t)data);
2049 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
2051 return;
2054 /* Setup bit 16 of flash address. */
2055 if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
2056 bank_select |= CSR_FLASH_64K_BANK;
2057 WRT_REG_WORD(&reg->ctrl_status, bank_select);
2058 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
2059 } else if (((addr & BIT_16) == 0) &&
2060 (bank_select & CSR_FLASH_64K_BANK)) {
2061 bank_select &= ~(CSR_FLASH_64K_BANK);
2062 WRT_REG_WORD(&reg->ctrl_status, bank_select);
2063 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
2066 /* Always perform IO mapped accesses to the FLASH registers. */
2067 if (ha->pio_address) {
2068 WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr);
2069 WRT_REG_WORD_PIO(PIO_REG(ha, flash_data), (uint16_t)data);
2070 } else {
2071 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
2072 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
2073 WRT_REG_WORD(&reg->flash_data, (uint16_t)data);
2074 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
2079 * qla2x00_poll_flash() - Polls flash for completion.
2080 * @ha: HA context
2081 * @addr: Address in flash to poll
2082 * @poll_data: Data to be polled
2083 * @man_id: Flash manufacturer ID
2084 * @flash_id: Flash ID
2086 * This function polls the device until bit 7 of what is read matches data
2087 * bit 7 or until data bit 5 becomes a 1. If that hapens, the flash ROM timed
2088 * out (a fatal error). The flash book recommeds reading bit 7 again after
2089 * reading bit 5 as a 1.
2091 * Returns 0 on success, else non-zero.
2093 static int
2094 qla2x00_poll_flash(struct qla_hw_data *ha, uint32_t addr, uint8_t poll_data,
2095 uint8_t man_id, uint8_t flash_id)
2097 int status;
2098 uint8_t flash_data;
2099 uint32_t cnt;
2101 status = 1;
2103 /* Wait for 30 seconds for command to finish. */
2104 poll_data &= BIT_7;
2105 for (cnt = 3000000; cnt; cnt--) {
2106 flash_data = qla2x00_read_flash_byte(ha, addr);
2107 if ((flash_data & BIT_7) == poll_data) {
2108 status = 0;
2109 break;
2112 if (man_id != 0x40 && man_id != 0xda) {
2113 if ((flash_data & BIT_5) && cnt > 2)
2114 cnt = 2;
2116 udelay(10);
2117 barrier();
2118 cond_resched();
2120 return status;
2124 * qla2x00_program_flash_address() - Programs a flash address
2125 * @ha: HA context
2126 * @addr: Address in flash to program
2127 * @data: Data to be written in flash
2128 * @man_id: Flash manufacturer ID
2129 * @flash_id: Flash ID
2131 * Returns 0 on success, else non-zero.
2133 static int
2134 qla2x00_program_flash_address(struct qla_hw_data *ha, uint32_t addr,
2135 uint8_t data, uint8_t man_id, uint8_t flash_id)
2137 /* Write Program Command Sequence. */
2138 if (IS_OEM_001(ha)) {
2139 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
2140 qla2x00_write_flash_byte(ha, 0x555, 0x55);
2141 qla2x00_write_flash_byte(ha, 0xaaa, 0xa0);
2142 qla2x00_write_flash_byte(ha, addr, data);
2143 } else {
2144 if (man_id == 0xda && flash_id == 0xc1) {
2145 qla2x00_write_flash_byte(ha, addr, data);
2146 if (addr & 0x7e)
2147 return 0;
2148 } else {
2149 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
2150 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
2151 qla2x00_write_flash_byte(ha, 0x5555, 0xa0);
2152 qla2x00_write_flash_byte(ha, addr, data);
2156 udelay(150);
2158 /* Wait for write to complete. */
2159 return qla2x00_poll_flash(ha, addr, data, man_id, flash_id);
2163 * qla2x00_erase_flash() - Erase the flash.
2164 * @ha: HA context
2165 * @man_id: Flash manufacturer ID
2166 * @flash_id: Flash ID
2168 * Returns 0 on success, else non-zero.
2170 static int
2171 qla2x00_erase_flash(struct qla_hw_data *ha, uint8_t man_id, uint8_t flash_id)
2173 /* Individual Sector Erase Command Sequence */
2174 if (IS_OEM_001(ha)) {
2175 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
2176 qla2x00_write_flash_byte(ha, 0x555, 0x55);
2177 qla2x00_write_flash_byte(ha, 0xaaa, 0x80);
2178 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
2179 qla2x00_write_flash_byte(ha, 0x555, 0x55);
2180 qla2x00_write_flash_byte(ha, 0xaaa, 0x10);
2181 } else {
2182 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
2183 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
2184 qla2x00_write_flash_byte(ha, 0x5555, 0x80);
2185 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
2186 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
2187 qla2x00_write_flash_byte(ha, 0x5555, 0x10);
2190 udelay(150);
2192 /* Wait for erase to complete. */
2193 return qla2x00_poll_flash(ha, 0x00, 0x80, man_id, flash_id);
2197 * qla2x00_erase_flash_sector() - Erase a flash sector.
2198 * @ha: HA context
2199 * @addr: Flash sector to erase
2200 * @sec_mask: Sector address mask
2201 * @man_id: Flash manufacturer ID
2202 * @flash_id: Flash ID
2204 * Returns 0 on success, else non-zero.
2206 static int
2207 qla2x00_erase_flash_sector(struct qla_hw_data *ha, uint32_t addr,
2208 uint32_t sec_mask, uint8_t man_id, uint8_t flash_id)
2210 /* Individual Sector Erase Command Sequence */
2211 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
2212 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
2213 qla2x00_write_flash_byte(ha, 0x5555, 0x80);
2214 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
2215 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
2216 if (man_id == 0x1f && flash_id == 0x13)
2217 qla2x00_write_flash_byte(ha, addr & sec_mask, 0x10);
2218 else
2219 qla2x00_write_flash_byte(ha, addr & sec_mask, 0x30);
2221 udelay(150);
2223 /* Wait for erase to complete. */
2224 return qla2x00_poll_flash(ha, addr, 0x80, man_id, flash_id);
2228 * qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip.
2229 * @man_id: Flash manufacturer ID
2230 * @flash_id: Flash ID
2232 static void
2233 qla2x00_get_flash_manufacturer(struct qla_hw_data *ha, uint8_t *man_id,
2234 uint8_t *flash_id)
2236 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
2237 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
2238 qla2x00_write_flash_byte(ha, 0x5555, 0x90);
2239 *man_id = qla2x00_read_flash_byte(ha, 0x0000);
2240 *flash_id = qla2x00_read_flash_byte(ha, 0x0001);
2241 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
2242 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
2243 qla2x00_write_flash_byte(ha, 0x5555, 0xf0);
2246 static void
2247 qla2x00_read_flash_data(struct qla_hw_data *ha, uint8_t *tmp_buf,
2248 uint32_t saddr, uint32_t length)
2250 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
2251 uint32_t midpoint, ilength;
2252 uint8_t data;
2254 midpoint = length / 2;
2256 WRT_REG_WORD(&reg->nvram, 0);
2257 RD_REG_WORD(&reg->nvram);
2258 for (ilength = 0; ilength < length; saddr++, ilength++, tmp_buf++) {
2259 if (ilength == midpoint) {
2260 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
2261 RD_REG_WORD(&reg->nvram);
2263 data = qla2x00_read_flash_byte(ha, saddr);
2264 if (saddr % 100)
2265 udelay(10);
2266 *tmp_buf = data;
2267 cond_resched();
2271 static inline void
2272 qla2x00_suspend_hba(struct scsi_qla_host *vha)
2274 int cnt;
2275 unsigned long flags;
2276 struct qla_hw_data *ha = vha->hw;
2277 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
2279 /* Suspend HBA. */
2280 scsi_block_requests(vha->host);
2281 ha->isp_ops->disable_intrs(ha);
2282 set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
2284 /* Pause RISC. */
2285 spin_lock_irqsave(&ha->hardware_lock, flags);
2286 WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
2287 RD_REG_WORD(&reg->hccr);
2288 if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
2289 for (cnt = 0; cnt < 30000; cnt++) {
2290 if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) != 0)
2291 break;
2292 udelay(100);
2294 } else {
2295 udelay(10);
2297 spin_unlock_irqrestore(&ha->hardware_lock, flags);
2300 static inline void
2301 qla2x00_resume_hba(struct scsi_qla_host *vha)
2303 struct qla_hw_data *ha = vha->hw;
2305 /* Resume HBA. */
2306 clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
2307 set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
2308 qla2xxx_wake_dpc(vha);
2309 qla2x00_wait_for_chip_reset(vha);
2310 scsi_unblock_requests(vha->host);
2313 uint8_t *
2314 qla2x00_read_optrom_data(struct scsi_qla_host *vha, uint8_t *buf,
2315 uint32_t offset, uint32_t length)
2317 uint32_t addr, midpoint;
2318 uint8_t *data;
2319 struct qla_hw_data *ha = vha->hw;
2320 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
2322 /* Suspend HBA. */
2323 qla2x00_suspend_hba(vha);
2325 /* Go with read. */
2326 midpoint = ha->optrom_size / 2;
2328 qla2x00_flash_enable(ha);
2329 WRT_REG_WORD(&reg->nvram, 0);
2330 RD_REG_WORD(&reg->nvram); /* PCI Posting. */
2331 for (addr = offset, data = buf; addr < length; addr++, data++) {
2332 if (addr == midpoint) {
2333 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
2334 RD_REG_WORD(&reg->nvram); /* PCI Posting. */
2337 *data = qla2x00_read_flash_byte(ha, addr);
2339 qla2x00_flash_disable(ha);
2341 /* Resume HBA. */
2342 qla2x00_resume_hba(vha);
2344 return buf;
2348 qla2x00_write_optrom_data(struct scsi_qla_host *vha, uint8_t *buf,
2349 uint32_t offset, uint32_t length)
2352 int rval;
2353 uint8_t man_id, flash_id, sec_number, data;
2354 uint16_t wd;
2355 uint32_t addr, liter, sec_mask, rest_addr;
2356 struct qla_hw_data *ha = vha->hw;
2357 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
2359 /* Suspend HBA. */
2360 qla2x00_suspend_hba(vha);
2362 rval = QLA_SUCCESS;
2363 sec_number = 0;
2365 /* Reset ISP chip. */
2366 WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);
2367 pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
2369 /* Go with write. */
2370 qla2x00_flash_enable(ha);
2371 do { /* Loop once to provide quick error exit */
2372 /* Structure of flash memory based on manufacturer */
2373 if (IS_OEM_001(ha)) {
2374 /* OEM variant with special flash part. */
2375 man_id = flash_id = 0;
2376 rest_addr = 0xffff;
2377 sec_mask = 0x10000;
2378 goto update_flash;
2380 qla2x00_get_flash_manufacturer(ha, &man_id, &flash_id);
2381 switch (man_id) {
2382 case 0x20: /* ST flash. */
2383 if (flash_id == 0xd2 || flash_id == 0xe3) {
2385 * ST m29w008at part - 64kb sector size with
2386 * 32kb,8kb,8kb,16kb sectors at memory address
2387 * 0xf0000.
2389 rest_addr = 0xffff;
2390 sec_mask = 0x10000;
2391 break;
2394 * ST m29w010b part - 16kb sector size
2395 * Default to 16kb sectors
2397 rest_addr = 0x3fff;
2398 sec_mask = 0x1c000;
2399 break;
2400 case 0x40: /* Mostel flash. */
2401 /* Mostel v29c51001 part - 512 byte sector size. */
2402 rest_addr = 0x1ff;
2403 sec_mask = 0x1fe00;
2404 break;
2405 case 0xbf: /* SST flash. */
2406 /* SST39sf10 part - 4kb sector size. */
2407 rest_addr = 0xfff;
2408 sec_mask = 0x1f000;
2409 break;
2410 case 0xda: /* Winbond flash. */
2411 /* Winbond W29EE011 part - 256 byte sector size. */
2412 rest_addr = 0x7f;
2413 sec_mask = 0x1ff80;
2414 break;
2415 case 0xc2: /* Macronix flash. */
2416 /* 64k sector size. */
2417 if (flash_id == 0x38 || flash_id == 0x4f) {
2418 rest_addr = 0xffff;
2419 sec_mask = 0x10000;
2420 break;
2422 /* Fall through... */
2424 case 0x1f: /* Atmel flash. */
2425 /* 512k sector size. */
2426 if (flash_id == 0x13) {
2427 rest_addr = 0x7fffffff;
2428 sec_mask = 0x80000000;
2429 break;
2431 /* Fall through... */
2433 case 0x01: /* AMD flash. */
2434 if (flash_id == 0x38 || flash_id == 0x40 ||
2435 flash_id == 0x4f) {
2436 /* Am29LV081 part - 64kb sector size. */
2437 /* Am29LV002BT part - 64kb sector size. */
2438 rest_addr = 0xffff;
2439 sec_mask = 0x10000;
2440 break;
2441 } else if (flash_id == 0x3e) {
2443 * Am29LV008b part - 64kb sector size with
2444 * 32kb,8kb,8kb,16kb sector at memory address
2445 * h0xf0000.
2447 rest_addr = 0xffff;
2448 sec_mask = 0x10000;
2449 break;
2450 } else if (flash_id == 0x20 || flash_id == 0x6e) {
2452 * Am29LV010 part or AM29f010 - 16kb sector
2453 * size.
2455 rest_addr = 0x3fff;
2456 sec_mask = 0x1c000;
2457 break;
2458 } else if (flash_id == 0x6d) {
2459 /* Am29LV001 part - 8kb sector size. */
2460 rest_addr = 0x1fff;
2461 sec_mask = 0x1e000;
2462 break;
2464 default:
2465 /* Default to 16 kb sector size. */
2466 rest_addr = 0x3fff;
2467 sec_mask = 0x1c000;
2468 break;
2471 update_flash:
2472 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
2473 if (qla2x00_erase_flash(ha, man_id, flash_id)) {
2474 rval = QLA_FUNCTION_FAILED;
2475 break;
2479 for (addr = offset, liter = 0; liter < length; liter++,
2480 addr++) {
2481 data = buf[liter];
2482 /* Are we at the beginning of a sector? */
2483 if ((addr & rest_addr) == 0) {
2484 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
2485 if (addr >= 0x10000UL) {
2486 if (((addr >> 12) & 0xf0) &&
2487 ((man_id == 0x01 &&
2488 flash_id == 0x3e) ||
2489 (man_id == 0x20 &&
2490 flash_id == 0xd2))) {
2491 sec_number++;
2492 if (sec_number == 1) {
2493 rest_addr =
2494 0x7fff;
2495 sec_mask =
2496 0x18000;
2497 } else if (
2498 sec_number == 2 ||
2499 sec_number == 3) {
2500 rest_addr =
2501 0x1fff;
2502 sec_mask =
2503 0x1e000;
2504 } else if (
2505 sec_number == 4) {
2506 rest_addr =
2507 0x3fff;
2508 sec_mask =
2509 0x1c000;
2513 } else if (addr == ha->optrom_size / 2) {
2514 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
2515 RD_REG_WORD(&reg->nvram);
2518 if (flash_id == 0xda && man_id == 0xc1) {
2519 qla2x00_write_flash_byte(ha, 0x5555,
2520 0xaa);
2521 qla2x00_write_flash_byte(ha, 0x2aaa,
2522 0x55);
2523 qla2x00_write_flash_byte(ha, 0x5555,
2524 0xa0);
2525 } else if (!IS_QLA2322(ha) && !IS_QLA6322(ha)) {
2526 /* Then erase it */
2527 if (qla2x00_erase_flash_sector(ha,
2528 addr, sec_mask, man_id,
2529 flash_id)) {
2530 rval = QLA_FUNCTION_FAILED;
2531 break;
2533 if (man_id == 0x01 && flash_id == 0x6d)
2534 sec_number++;
2538 if (man_id == 0x01 && flash_id == 0x6d) {
2539 if (sec_number == 1 &&
2540 addr == (rest_addr - 1)) {
2541 rest_addr = 0x0fff;
2542 sec_mask = 0x1f000;
2543 } else if (sec_number == 3 && (addr & 0x7ffe)) {
2544 rest_addr = 0x3fff;
2545 sec_mask = 0x1c000;
2549 if (qla2x00_program_flash_address(ha, addr, data,
2550 man_id, flash_id)) {
2551 rval = QLA_FUNCTION_FAILED;
2552 break;
2554 cond_resched();
2556 } while (0);
2557 qla2x00_flash_disable(ha);
2559 /* Resume HBA. */
2560 qla2x00_resume_hba(vha);
2562 return rval;
2565 uint8_t *
2566 qla24xx_read_optrom_data(struct scsi_qla_host *vha, uint8_t *buf,
2567 uint32_t offset, uint32_t length)
2569 struct qla_hw_data *ha = vha->hw;
2571 /* Suspend HBA. */
2572 scsi_block_requests(vha->host);
2573 set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
2575 /* Go with read. */
2576 qla24xx_read_flash_data(vha, (uint32_t *)buf, offset >> 2, length >> 2);
2578 /* Resume HBA. */
2579 clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
2580 scsi_unblock_requests(vha->host);
2582 return buf;
2586 qla24xx_write_optrom_data(struct scsi_qla_host *vha, uint8_t *buf,
2587 uint32_t offset, uint32_t length)
2589 int rval;
2590 struct qla_hw_data *ha = vha->hw;
2592 /* Suspend HBA. */
2593 scsi_block_requests(vha->host);
2594 set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
2596 /* Go with write. */
2597 rval = qla24xx_write_flash_data(vha, (uint32_t *)buf, offset >> 2,
2598 length >> 2);
2600 clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
2601 scsi_unblock_requests(vha->host);
2603 return rval;
2606 uint8_t *
2607 qla25xx_read_optrom_data(struct scsi_qla_host *vha, uint8_t *buf,
2608 uint32_t offset, uint32_t length)
2610 int rval;
2611 dma_addr_t optrom_dma;
2612 void *optrom;
2613 uint8_t *pbuf;
2614 uint32_t faddr, left, burst;
2615 struct qla_hw_data *ha = vha->hw;
2617 if (IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha) ||
2618 IS_QLA27XX(ha))
2619 goto try_fast;
2620 if (offset & 0xfff)
2621 goto slow_read;
2622 if (length < OPTROM_BURST_SIZE)
2623 goto slow_read;
2625 try_fast:
2626 optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
2627 &optrom_dma, GFP_KERNEL);
2628 if (!optrom) {
2629 ql_log(ql_log_warn, vha, 0x00cc,
2630 "Unable to allocate memory for optrom burst read (%x KB).\n",
2631 OPTROM_BURST_SIZE / 1024);
2632 goto slow_read;
2635 pbuf = buf;
2636 faddr = offset >> 2;
2637 left = length >> 2;
2638 burst = OPTROM_BURST_DWORDS;
2639 while (left != 0) {
2640 if (burst > left)
2641 burst = left;
2643 rval = qla2x00_dump_ram(vha, optrom_dma,
2644 flash_data_addr(ha, faddr), burst);
2645 if (rval) {
2646 ql_log(ql_log_warn, vha, 0x00f5,
2647 "Unable to burst-read optrom segment (%x/%x/%llx).\n",
2648 rval, flash_data_addr(ha, faddr),
2649 (unsigned long long)optrom_dma);
2650 ql_log(ql_log_warn, vha, 0x00f6,
2651 "Reverting to slow-read.\n");
2653 dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
2654 optrom, optrom_dma);
2655 goto slow_read;
2658 memcpy(pbuf, optrom, burst * 4);
2660 left -= burst;
2661 faddr += burst;
2662 pbuf += burst * 4;
2665 dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, optrom,
2666 optrom_dma);
2668 return buf;
2670 slow_read:
2671 return qla24xx_read_optrom_data(vha, buf, offset, length);
2675 * qla2x00_get_fcode_version() - Determine an FCODE image's version.
2676 * @ha: HA context
2677 * @pcids: Pointer to the FCODE PCI data structure
2679 * The process of retrieving the FCODE version information is at best
2680 * described as interesting.
2682 * Within the first 100h bytes of the image an ASCII string is present
2683 * which contains several pieces of information including the FCODE
2684 * version. Unfortunately it seems the only reliable way to retrieve
2685 * the version is by scanning for another sentinel within the string,
2686 * the FCODE build date:
2688 * ... 2.00.02 10/17/02 ...
2690 * Returns QLA_SUCCESS on successful retrieval of version.
2692 static void
2693 qla2x00_get_fcode_version(struct qla_hw_data *ha, uint32_t pcids)
2695 int ret = QLA_FUNCTION_FAILED;
2696 uint32_t istart, iend, iter, vend;
2697 uint8_t do_next, rbyte, *vbyte;
2699 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
2701 /* Skip the PCI data structure. */
2702 istart = pcids +
2703 ((qla2x00_read_flash_byte(ha, pcids + 0x0B) << 8) |
2704 qla2x00_read_flash_byte(ha, pcids + 0x0A));
2705 iend = istart + 0x100;
2706 do {
2707 /* Scan for the sentinel date string...eeewww. */
2708 do_next = 0;
2709 iter = istart;
2710 while ((iter < iend) && !do_next) {
2711 iter++;
2712 if (qla2x00_read_flash_byte(ha, iter) == '/') {
2713 if (qla2x00_read_flash_byte(ha, iter + 2) ==
2714 '/')
2715 do_next++;
2716 else if (qla2x00_read_flash_byte(ha,
2717 iter + 3) == '/')
2718 do_next++;
2721 if (!do_next)
2722 break;
2724 /* Backtrack to previous ' ' (space). */
2725 do_next = 0;
2726 while ((iter > istart) && !do_next) {
2727 iter--;
2728 if (qla2x00_read_flash_byte(ha, iter) == ' ')
2729 do_next++;
2731 if (!do_next)
2732 break;
2735 * Mark end of version tag, and find previous ' ' (space) or
2736 * string length (recent FCODE images -- major hack ahead!!!).
2738 vend = iter - 1;
2739 do_next = 0;
2740 while ((iter > istart) && !do_next) {
2741 iter--;
2742 rbyte = qla2x00_read_flash_byte(ha, iter);
2743 if (rbyte == ' ' || rbyte == 0xd || rbyte == 0x10)
2744 do_next++;
2746 if (!do_next)
2747 break;
2749 /* Mark beginning of version tag, and copy data. */
2750 iter++;
2751 if ((vend - iter) &&
2752 ((vend - iter) < sizeof(ha->fcode_revision))) {
2753 vbyte = ha->fcode_revision;
2754 while (iter <= vend) {
2755 *vbyte++ = qla2x00_read_flash_byte(ha, iter);
2756 iter++;
2758 ret = QLA_SUCCESS;
2760 } while (0);
2762 if (ret != QLA_SUCCESS)
2763 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
2767 qla2x00_get_flash_version(scsi_qla_host_t *vha, void *mbuf)
2769 int ret = QLA_SUCCESS;
2770 uint8_t code_type, last_image;
2771 uint32_t pcihdr, pcids;
2772 uint8_t *dbyte;
2773 uint16_t *dcode;
2774 struct qla_hw_data *ha = vha->hw;
2776 if (!ha->pio_address || !mbuf)
2777 return QLA_FUNCTION_FAILED;
2779 memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
2780 memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
2781 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
2782 memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
2784 qla2x00_flash_enable(ha);
2786 /* Begin with first PCI expansion ROM header. */
2787 pcihdr = 0;
2788 last_image = 1;
2789 do {
2790 /* Verify PCI expansion ROM header. */
2791 if (qla2x00_read_flash_byte(ha, pcihdr) != 0x55 ||
2792 qla2x00_read_flash_byte(ha, pcihdr + 0x01) != 0xaa) {
2793 /* No signature */
2794 ql_log(ql_log_fatal, vha, 0x0050,
2795 "No matching ROM signature.\n");
2796 ret = QLA_FUNCTION_FAILED;
2797 break;
2800 /* Locate PCI data structure. */
2801 pcids = pcihdr +
2802 ((qla2x00_read_flash_byte(ha, pcihdr + 0x19) << 8) |
2803 qla2x00_read_flash_byte(ha, pcihdr + 0x18));
2805 /* Validate signature of PCI data structure. */
2806 if (qla2x00_read_flash_byte(ha, pcids) != 'P' ||
2807 qla2x00_read_flash_byte(ha, pcids + 0x1) != 'C' ||
2808 qla2x00_read_flash_byte(ha, pcids + 0x2) != 'I' ||
2809 qla2x00_read_flash_byte(ha, pcids + 0x3) != 'R') {
2810 /* Incorrect header. */
2811 ql_log(ql_log_fatal, vha, 0x0051,
2812 "PCI data struct not found pcir_adr=%x.\n", pcids);
2813 ret = QLA_FUNCTION_FAILED;
2814 break;
2817 /* Read version */
2818 code_type = qla2x00_read_flash_byte(ha, pcids + 0x14);
2819 switch (code_type) {
2820 case ROM_CODE_TYPE_BIOS:
2821 /* Intel x86, PC-AT compatible. */
2822 ha->bios_revision[0] =
2823 qla2x00_read_flash_byte(ha, pcids + 0x12);
2824 ha->bios_revision[1] =
2825 qla2x00_read_flash_byte(ha, pcids + 0x13);
2826 ql_dbg(ql_dbg_init, vha, 0x0052,
2827 "Read BIOS %d.%d.\n",
2828 ha->bios_revision[1], ha->bios_revision[0]);
2829 break;
2830 case ROM_CODE_TYPE_FCODE:
2831 /* Open Firmware standard for PCI (FCode). */
2832 /* Eeeewww... */
2833 qla2x00_get_fcode_version(ha, pcids);
2834 break;
2835 case ROM_CODE_TYPE_EFI:
2836 /* Extensible Firmware Interface (EFI). */
2837 ha->efi_revision[0] =
2838 qla2x00_read_flash_byte(ha, pcids + 0x12);
2839 ha->efi_revision[1] =
2840 qla2x00_read_flash_byte(ha, pcids + 0x13);
2841 ql_dbg(ql_dbg_init, vha, 0x0053,
2842 "Read EFI %d.%d.\n",
2843 ha->efi_revision[1], ha->efi_revision[0]);
2844 break;
2845 default:
2846 ql_log(ql_log_warn, vha, 0x0054,
2847 "Unrecognized code type %x at pcids %x.\n",
2848 code_type, pcids);
2849 break;
2852 last_image = qla2x00_read_flash_byte(ha, pcids + 0x15) & BIT_7;
2854 /* Locate next PCI expansion ROM. */
2855 pcihdr += ((qla2x00_read_flash_byte(ha, pcids + 0x11) << 8) |
2856 qla2x00_read_flash_byte(ha, pcids + 0x10)) * 512;
2857 } while (!last_image);
2859 if (IS_QLA2322(ha)) {
2860 /* Read firmware image information. */
2861 memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
2862 dbyte = mbuf;
2863 memset(dbyte, 0, 8);
2864 dcode = (uint16_t *)dbyte;
2866 qla2x00_read_flash_data(ha, dbyte, ha->flt_region_fw * 4 + 10,
2868 ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x010a,
2869 "Dumping fw "
2870 "ver from flash:.\n");
2871 ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010b,
2872 (uint8_t *)dbyte, 8);
2874 if ((dcode[0] == 0xffff && dcode[1] == 0xffff &&
2875 dcode[2] == 0xffff && dcode[3] == 0xffff) ||
2876 (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
2877 dcode[3] == 0)) {
2878 ql_log(ql_log_warn, vha, 0x0057,
2879 "Unrecognized fw revision at %x.\n",
2880 ha->flt_region_fw * 4);
2881 } else {
2882 /* values are in big endian */
2883 ha->fw_revision[0] = dbyte[0] << 16 | dbyte[1];
2884 ha->fw_revision[1] = dbyte[2] << 16 | dbyte[3];
2885 ha->fw_revision[2] = dbyte[4] << 16 | dbyte[5];
2886 ql_dbg(ql_dbg_init, vha, 0x0058,
2887 "FW Version: "
2888 "%d.%d.%d.\n", ha->fw_revision[0],
2889 ha->fw_revision[1], ha->fw_revision[2]);
2893 qla2x00_flash_disable(ha);
2895 return ret;
2899 qla82xx_get_flash_version(scsi_qla_host_t *vha, void *mbuf)
2901 int ret = QLA_SUCCESS;
2902 uint32_t pcihdr, pcids;
2903 uint32_t *dcode;
2904 uint8_t *bcode;
2905 uint8_t code_type, last_image;
2906 struct qla_hw_data *ha = vha->hw;
2908 if (!mbuf)
2909 return QLA_FUNCTION_FAILED;
2911 memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
2912 memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
2913 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
2914 memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
2916 dcode = mbuf;
2918 /* Begin with first PCI expansion ROM header. */
2919 pcihdr = ha->flt_region_boot << 2;
2920 last_image = 1;
2921 do {
2922 /* Verify PCI expansion ROM header. */
2923 ha->isp_ops->read_optrom(vha, (uint8_t *)dcode, pcihdr,
2924 0x20 * 4);
2925 bcode = mbuf + (pcihdr % 4);
2926 if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa) {
2927 /* No signature */
2928 ql_log(ql_log_fatal, vha, 0x0154,
2929 "No matching ROM signature.\n");
2930 ret = QLA_FUNCTION_FAILED;
2931 break;
2934 /* Locate PCI data structure. */
2935 pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
2937 ha->isp_ops->read_optrom(vha, (uint8_t *)dcode, pcids,
2938 0x20 * 4);
2939 bcode = mbuf + (pcihdr % 4);
2941 /* Validate signature of PCI data structure. */
2942 if (bcode[0x0] != 'P' || bcode[0x1] != 'C' ||
2943 bcode[0x2] != 'I' || bcode[0x3] != 'R') {
2944 /* Incorrect header. */
2945 ql_log(ql_log_fatal, vha, 0x0155,
2946 "PCI data struct not found pcir_adr=%x.\n", pcids);
2947 ret = QLA_FUNCTION_FAILED;
2948 break;
2951 /* Read version */
2952 code_type = bcode[0x14];
2953 switch (code_type) {
2954 case ROM_CODE_TYPE_BIOS:
2955 /* Intel x86, PC-AT compatible. */
2956 ha->bios_revision[0] = bcode[0x12];
2957 ha->bios_revision[1] = bcode[0x13];
2958 ql_dbg(ql_dbg_init, vha, 0x0156,
2959 "Read BIOS %d.%d.\n",
2960 ha->bios_revision[1], ha->bios_revision[0]);
2961 break;
2962 case ROM_CODE_TYPE_FCODE:
2963 /* Open Firmware standard for PCI (FCode). */
2964 ha->fcode_revision[0] = bcode[0x12];
2965 ha->fcode_revision[1] = bcode[0x13];
2966 ql_dbg(ql_dbg_init, vha, 0x0157,
2967 "Read FCODE %d.%d.\n",
2968 ha->fcode_revision[1], ha->fcode_revision[0]);
2969 break;
2970 case ROM_CODE_TYPE_EFI:
2971 /* Extensible Firmware Interface (EFI). */
2972 ha->efi_revision[0] = bcode[0x12];
2973 ha->efi_revision[1] = bcode[0x13];
2974 ql_dbg(ql_dbg_init, vha, 0x0158,
2975 "Read EFI %d.%d.\n",
2976 ha->efi_revision[1], ha->efi_revision[0]);
2977 break;
2978 default:
2979 ql_log(ql_log_warn, vha, 0x0159,
2980 "Unrecognized code type %x at pcids %x.\n",
2981 code_type, pcids);
2982 break;
2985 last_image = bcode[0x15] & BIT_7;
2987 /* Locate next PCI expansion ROM. */
2988 pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
2989 } while (!last_image);
2991 /* Read firmware image information. */
2992 memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
2993 dcode = mbuf;
2994 ha->isp_ops->read_optrom(vha, (uint8_t *)dcode, ha->flt_region_fw << 2,
2995 0x20);
2996 bcode = mbuf + (pcihdr % 4);
2998 /* Validate signature of PCI data structure. */
2999 if (bcode[0x0] == 0x3 && bcode[0x1] == 0x0 &&
3000 bcode[0x2] == 0x40 && bcode[0x3] == 0x40) {
3001 ha->fw_revision[0] = bcode[0x4];
3002 ha->fw_revision[1] = bcode[0x5];
3003 ha->fw_revision[2] = bcode[0x6];
3004 ql_dbg(ql_dbg_init, vha, 0x0153,
3005 "Firmware revision %d.%d.%d\n",
3006 ha->fw_revision[0], ha->fw_revision[1],
3007 ha->fw_revision[2]);
3010 return ret;
3014 qla24xx_get_flash_version(scsi_qla_host_t *vha, void *mbuf)
3016 int ret = QLA_SUCCESS;
3017 uint32_t pcihdr, pcids;
3018 uint32_t *dcode;
3019 uint8_t *bcode;
3020 uint8_t code_type, last_image;
3021 int i;
3022 struct qla_hw_data *ha = vha->hw;
3023 uint32_t faddr = 0;
3025 pcihdr = pcids = 0;
3027 if (IS_P3P_TYPE(ha))
3028 return ret;
3030 if (!mbuf)
3031 return QLA_FUNCTION_FAILED;
3033 memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
3034 memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
3035 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
3036 memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
3038 dcode = mbuf;
3039 pcihdr = ha->flt_region_boot << 2;
3040 if (IS_QLA27XX(ha) &&
3041 qla27xx_find_valid_image(vha) == QLA27XX_SECONDARY_IMAGE)
3042 pcihdr = ha->flt_region_boot_sec << 2;
3044 last_image = 1;
3045 do {
3046 /* Verify PCI expansion ROM header. */
3047 qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, 0x20);
3048 bcode = mbuf + (pcihdr % 4);
3049 if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa) {
3050 /* No signature */
3051 ql_log(ql_log_fatal, vha, 0x0059,
3052 "No matching ROM signature.\n");
3053 ret = QLA_FUNCTION_FAILED;
3054 break;
3057 /* Locate PCI data structure. */
3058 pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
3060 qla24xx_read_flash_data(vha, dcode, pcids >> 2, 0x20);
3061 bcode = mbuf + (pcihdr % 4);
3063 /* Validate signature of PCI data structure. */
3064 if (bcode[0x0] != 'P' || bcode[0x1] != 'C' ||
3065 bcode[0x2] != 'I' || bcode[0x3] != 'R') {
3066 /* Incorrect header. */
3067 ql_log(ql_log_fatal, vha, 0x005a,
3068 "PCI data struct not found pcir_adr=%x.\n", pcids);
3069 ret = QLA_FUNCTION_FAILED;
3070 break;
3073 /* Read version */
3074 code_type = bcode[0x14];
3075 switch (code_type) {
3076 case ROM_CODE_TYPE_BIOS:
3077 /* Intel x86, PC-AT compatible. */
3078 ha->bios_revision[0] = bcode[0x12];
3079 ha->bios_revision[1] = bcode[0x13];
3080 ql_dbg(ql_dbg_init, vha, 0x005b,
3081 "Read BIOS %d.%d.\n",
3082 ha->bios_revision[1], ha->bios_revision[0]);
3083 break;
3084 case ROM_CODE_TYPE_FCODE:
3085 /* Open Firmware standard for PCI (FCode). */
3086 ha->fcode_revision[0] = bcode[0x12];
3087 ha->fcode_revision[1] = bcode[0x13];
3088 ql_dbg(ql_dbg_init, vha, 0x005c,
3089 "Read FCODE %d.%d.\n",
3090 ha->fcode_revision[1], ha->fcode_revision[0]);
3091 break;
3092 case ROM_CODE_TYPE_EFI:
3093 /* Extensible Firmware Interface (EFI). */
3094 ha->efi_revision[0] = bcode[0x12];
3095 ha->efi_revision[1] = bcode[0x13];
3096 ql_dbg(ql_dbg_init, vha, 0x005d,
3097 "Read EFI %d.%d.\n",
3098 ha->efi_revision[1], ha->efi_revision[0]);
3099 break;
3100 default:
3101 ql_log(ql_log_warn, vha, 0x005e,
3102 "Unrecognized code type %x at pcids %x.\n",
3103 code_type, pcids);
3104 break;
3107 last_image = bcode[0x15] & BIT_7;
3109 /* Locate next PCI expansion ROM. */
3110 pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
3111 } while (!last_image);
3113 /* Read firmware image information. */
3114 memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
3115 dcode = mbuf;
3116 faddr = ha->flt_region_fw;
3117 if (IS_QLA27XX(ha) &&
3118 qla27xx_find_valid_image(vha) == QLA27XX_SECONDARY_IMAGE)
3119 faddr = ha->flt_region_fw_sec;
3121 qla24xx_read_flash_data(vha, dcode, faddr + 4, 4);
3122 for (i = 0; i < 4; i++)
3123 dcode[i] = be32_to_cpu(dcode[i]);
3125 if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
3126 dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
3127 (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
3128 dcode[3] == 0)) {
3129 ql_log(ql_log_warn, vha, 0x005f,
3130 "Unrecognized fw revision at %x.\n",
3131 ha->flt_region_fw * 4);
3132 } else {
3133 ha->fw_revision[0] = dcode[0];
3134 ha->fw_revision[1] = dcode[1];
3135 ha->fw_revision[2] = dcode[2];
3136 ha->fw_revision[3] = dcode[3];
3137 ql_dbg(ql_dbg_init, vha, 0x0060,
3138 "Firmware revision %d.%d.%d (%x).\n",
3139 ha->fw_revision[0], ha->fw_revision[1],
3140 ha->fw_revision[2], ha->fw_revision[3]);
3143 /* Check for golden firmware and get version if available */
3144 if (!IS_QLA81XX(ha)) {
3145 /* Golden firmware is not present in non 81XX adapters */
3146 return ret;
3149 memset(ha->gold_fw_version, 0, sizeof(ha->gold_fw_version));
3150 dcode = mbuf;
3151 ha->isp_ops->read_optrom(vha, (uint8_t *)dcode,
3152 ha->flt_region_gold_fw << 2, 32);
3154 if (dcode[4] == 0xFFFFFFFF && dcode[5] == 0xFFFFFFFF &&
3155 dcode[6] == 0xFFFFFFFF && dcode[7] == 0xFFFFFFFF) {
3156 ql_log(ql_log_warn, vha, 0x0056,
3157 "Unrecognized golden fw at 0x%x.\n",
3158 ha->flt_region_gold_fw * 4);
3159 return ret;
3162 for (i = 4; i < 8; i++)
3163 ha->gold_fw_version[i-4] = be32_to_cpu(dcode[i]);
3165 return ret;
3168 static int
3169 qla2xxx_is_vpd_valid(uint8_t *pos, uint8_t *end)
3171 if (pos >= end || *pos != 0x82)
3172 return 0;
3174 pos += 3 + pos[1];
3175 if (pos >= end || *pos != 0x90)
3176 return 0;
3178 pos += 3 + pos[1];
3179 if (pos >= end || *pos != 0x78)
3180 return 0;
3182 return 1;
3186 qla2xxx_get_vpd_field(scsi_qla_host_t *vha, char *key, char *str, size_t size)
3188 struct qla_hw_data *ha = vha->hw;
3189 uint8_t *pos = ha->vpd;
3190 uint8_t *end = pos + ha->vpd_size;
3191 int len = 0;
3193 if (!IS_FWI2_CAPABLE(ha) || !qla2xxx_is_vpd_valid(pos, end))
3194 return 0;
3196 while (pos < end && *pos != 0x78) {
3197 len = (*pos == 0x82) ? pos[1] : pos[2];
3199 if (!strncmp(pos, key, strlen(key)))
3200 break;
3202 if (*pos != 0x90 && *pos != 0x91)
3203 pos += len;
3205 pos += 3;
3208 if (pos < end - len && *pos != 0x78)
3209 return scnprintf(str, size, "%.*s", len, pos + 3);
3211 return 0;
3215 qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *vha)
3217 int len, max_len;
3218 uint32_t fcp_prio_addr;
3219 struct qla_hw_data *ha = vha->hw;
3221 if (!ha->fcp_prio_cfg) {
3222 ha->fcp_prio_cfg = vmalloc(FCP_PRIO_CFG_SIZE);
3223 if (!ha->fcp_prio_cfg) {
3224 ql_log(ql_log_warn, vha, 0x00d5,
3225 "Unable to allocate memory for fcp priorty data (%x).\n",
3226 FCP_PRIO_CFG_SIZE);
3227 return QLA_FUNCTION_FAILED;
3230 memset(ha->fcp_prio_cfg, 0, FCP_PRIO_CFG_SIZE);
3232 fcp_prio_addr = ha->flt_region_fcp_prio;
3234 /* first read the fcp priority data header from flash */
3235 ha->isp_ops->read_optrom(vha, (uint8_t *)ha->fcp_prio_cfg,
3236 fcp_prio_addr << 2, FCP_PRIO_CFG_HDR_SIZE);
3238 if (!qla24xx_fcp_prio_cfg_valid(vha, ha->fcp_prio_cfg, 0))
3239 goto fail;
3241 /* read remaining FCP CMD config data from flash */
3242 fcp_prio_addr += (FCP_PRIO_CFG_HDR_SIZE >> 2);
3243 len = ha->fcp_prio_cfg->num_entries * FCP_PRIO_CFG_ENTRY_SIZE;
3244 max_len = FCP_PRIO_CFG_SIZE - FCP_PRIO_CFG_HDR_SIZE;
3246 ha->isp_ops->read_optrom(vha, (uint8_t *)&ha->fcp_prio_cfg->entry[0],
3247 fcp_prio_addr << 2, (len < max_len ? len : max_len));
3249 /* revalidate the entire FCP priority config data, including entries */
3250 if (!qla24xx_fcp_prio_cfg_valid(vha, ha->fcp_prio_cfg, 1))
3251 goto fail;
3253 ha->flags.fcp_prio_enabled = 1;
3254 return QLA_SUCCESS;
3255 fail:
3256 vfree(ha->fcp_prio_cfg);
3257 ha->fcp_prio_cfg = NULL;
3258 return QLA_FUNCTION_FAILED;