?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
xfrm: allow to accept packets with ipv6 NEXTHDR_HOP in xfrm_input
[linux/fpc-iii.git] / drivers / char / applicom.c
blob4ccc39e00ced33fa1942be81fe6f87f7658adbab
1 /* Derived from Applicom driver ac.c for SCO Unix */
2 /* Ported by David Woodhouse, Axiom (Cambridge) Ltd. */
3 /* dwmw2@infradead.org 30/8/98 */
4 /* $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ */
5 /* This module is for Linux 2.1 and 2.2 series kernels. */
6 /*****************************************************************************/
7 /* J PAGET 18/02/94 passage V2.4.2 ioctl avec code 2 reset to les interrupt */
8 /* ceci pour reseter correctement apres une sortie sauvage */
9 /* J PAGET 02/05/94 passage V2.4.3 dans le traitement de d'interruption, */
10 /* LoopCount n'etait pas initialise a 0. */
11 /* F LAFORSE 04/07/95 version V2.6.0 lecture bidon apres acces a une carte */
12 /* pour liberer le bus */
13 /* J.PAGET 19/11/95 version V2.6.1 Nombre, addresse,irq n'est plus configure */
14 /* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter */
15 /* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3 */
16 /* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes */
17 /* addresses de base des cartes, IOCTL 6 plus complet */
18 /* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification */
19 /* de code autre que le texte V2.6.1 en V2.8.0 */
20 /*****************************************************************************/
21
22
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <linux/interrupt.h>
26 #include <linux/sched/signal.h>
27 #include <linux/slab.h>
28 #include <linux/errno.h>
29 #include <linux/mutex.h>
30 #include <linux/miscdevice.h>
31 #include <linux/pci.h>
32 #include <linux/wait.h>
33 #include <linux/init.h>
34 #include <linux/fs.h>
35 #include <linux/nospec.h>
36
37 #include <asm/io.h>
38 #include <linux/uaccess.h>
39
40 #include "applicom.h"
41
42
43 /* NOTE: We use for loops with {write,read}b() instead of
44 memcpy_{from,to}io throughout this driver. This is because
45 the board doesn't correctly handle word accesses - only
46 bytes.
47 */
48
49
50 #undef DEBUG
51
52 #define MAX_BOARD 8 /* maximum of pc board possible */
53 #define MAX_ISA_BOARD 4
54 #define LEN_RAM_IO 0x800
55 #define AC_MINOR 157
56
57 #ifndef PCI_VENDOR_ID_APPLICOM
58 #define PCI_VENDOR_ID_APPLICOM 0x1389
59 #define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001
60 #define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
61 #define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003
62 #endif
63
64 static DEFINE_MUTEX(ac_mutex);
65 static char *applicom_pci_devnames[] = {
66 "PCI board",
67 "PCI2000IBS / PCI2000CAN",
68 "PCI2000PFB"
69 };
70
71 static const struct pci_device_id applicom_pci_tbl[] = {
72 { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCIGENERIC) },
73 { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN) },
74 { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000PFB) },
75 { 0 }
76 };
77 MODULE_DEVICE_TABLE(pci, applicom_pci_tbl);
78
79 MODULE_AUTHOR("David Woodhouse & Applicom International");
80 MODULE_DESCRIPTION("Driver for Applicom Profibus card");
81 MODULE_LICENSE("GPL");
82 MODULE_ALIAS_MISCDEV(AC_MINOR);
83
84 MODULE_SUPPORTED_DEVICE("ac");
85
86
87 static struct applicom_board {
88 unsigned long PhysIO;
89 void __iomem *RamIO;
90 wait_queue_head_t FlagSleepSend;
91 long irq;
92 spinlock_t mutex;
93 } apbs[MAX_BOARD];
94
95 static unsigned int irq = 0; /* interrupt number IRQ */
96 static unsigned long mem = 0; /* physical segment of board */
97
98 module_param_hw(irq, uint, irq, 0);
99 MODULE_PARM_DESC(irq, "IRQ of the Applicom board");
100 module_param_hw(mem, ulong, iomem, 0);
101 MODULE_PARM_DESC(mem, "Shared Memory Address of Applicom board");
102
103 static unsigned int numboards; /* number of installed boards */
104 static volatile unsigned char Dummy;
105 static DECLARE_WAIT_QUEUE_HEAD(FlagSleepRec);
106 static unsigned int WriteErrorCount; /* number of write error */
107 static unsigned int ReadErrorCount; /* number of read error */
108 static unsigned int DeviceErrorCount; /* number of device error */
109
110 static ssize_t ac_read (struct file *, char __user *, size_t, loff_t *);
111 static ssize_t ac_write (struct file *, const char __user *, size_t, loff_t *);
112 static long ac_ioctl(struct file *, unsigned int, unsigned long);
113 static irqreturn_t ac_interrupt(int, void *);
114
115 static const struct file_operations ac_fops = {
116 .owner = THIS_MODULE,
117 .llseek = no_llseek,
118 .read = ac_read,
119 .write = ac_write,
120 .unlocked_ioctl = ac_ioctl,
121 };
122
123 static struct miscdevice ac_miscdev = {
124 AC_MINOR,
125 "ac",
126 &ac_fops
127 };
128
129 static int dummy; /* dev_id for request_irq() */
130
131 static int ac_register_board(unsigned long physloc, void __iomem *loc,
132 unsigned char boardno)
133 {
134 volatile unsigned char byte_reset_it;
135
136 if((readb(loc + CONF_END_TEST) != 0x00) ||
137 (readb(loc + CONF_END_TEST + 1) != 0x55) ||
138 (readb(loc + CONF_END_TEST + 2) != 0xAA) ||
139 (readb(loc + CONF_END_TEST + 3) != 0xFF))
140 return 0;
141
142 if (!boardno)
143 boardno = readb(loc + NUMCARD_OWNER_TO_PC);
144
145 if (!boardno || boardno > MAX_BOARD) {
146 printk(KERN_WARNING "Board #%d (at 0x%lx) is out of range (1 <= x <= %d).\n",
147 boardno, physloc, MAX_BOARD);
148 return 0;
149 }
150
151 if (apbs[boardno - 1].RamIO) {
152 printk(KERN_WARNING "Board #%d (at 0x%lx) conflicts with previous board #%d (at 0x%lx)\n",
153 boardno, physloc, boardno, apbs[boardno-1].PhysIO);
154 return 0;
155 }
156
157 boardno--;
158
159 apbs[boardno].PhysIO = physloc;
160 apbs[boardno].RamIO = loc;
161 init_waitqueue_head(&apbs[boardno].FlagSleepSend);
162 spin_lock_init(&apbs[boardno].mutex);
163 byte_reset_it = readb(loc + RAM_IT_TO_PC);
164
165 numboards++;
166 return boardno + 1;
167 }
168
169 static void __exit applicom_exit(void)
170 {
171 unsigned int i;
172
173 misc_deregister(&ac_miscdev);
174
175 for (i = 0; i < MAX_BOARD; i++) {
176
177 if (!apbs[i].RamIO)
178 continue;
179
180 if (apbs[i].irq)
181 free_irq(apbs[i].irq, &dummy);
182
183 iounmap(apbs[i].RamIO);
184 }
185 }
186
187 static int __init applicom_init(void)
188 {
189 int i, numisa = 0;
190 struct pci_dev *dev = NULL;
191 void __iomem *RamIO;
192 int boardno, ret;
193
194 printk(KERN_INFO "Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $\n");
195
196 /* No mem and irq given - check for a PCI card */
197
198 while ( (dev = pci_get_class(PCI_CLASS_OTHERS << 16, dev))) {
199
200 if (!pci_match_id(applicom_pci_tbl, dev))
201 continue;
202
203 if (pci_enable_device(dev))
204 return -EIO;
205
206 RamIO = ioremap_nocache(pci_resource_start(dev, 0), LEN_RAM_IO);
207
208 if (!RamIO) {
209 printk(KERN_INFO "ac.o: Failed to ioremap PCI memory "
210 "space at 0x%llx\n",
211 (unsigned long long)pci_resource_start(dev, 0));
212 pci_disable_device(dev);
213 return -EIO;
214 }
215
216 printk(KERN_INFO "Applicom %s found at mem 0x%llx, irq %d\n",
217 applicom_pci_devnames[dev->device-1],
218 (unsigned long long)pci_resource_start(dev, 0),
219 dev->irq);
220
221 boardno = ac_register_board(pci_resource_start(dev, 0),
222 RamIO, 0);
223 if (!boardno) {
224 printk(KERN_INFO "ac.o: PCI Applicom device doesn't have correct signature.\n");
225 iounmap(RamIO);
226 pci_disable_device(dev);
227 continue;
228 }
229
230 if (request_irq(dev->irq, &ac_interrupt, IRQF_SHARED, "Applicom PCI", &dummy)) {
231 printk(KERN_INFO "Could not allocate IRQ %d for PCI Applicom device.\n", dev->irq);
232 iounmap(RamIO);
233 pci_disable_device(dev);
234 apbs[boardno - 1].RamIO = NULL;
235 continue;
236 }
237
238 /* Enable interrupts. */
239
240 writeb(0x40, apbs[boardno - 1].RamIO + RAM_IT_FROM_PC);
241
242 apbs[boardno - 1].irq = dev->irq;
243 }
244
245 /* Finished with PCI cards. If none registered,
246 * and there was no mem/irq specified, exit */
247
248 if (!mem || !irq) {
249 if (numboards)
250 goto fin;
251 else {
252 printk(KERN_INFO "ac.o: No PCI boards found.\n");
253 printk(KERN_INFO "ac.o: For an ISA board you must supply memory and irq parameters.\n");
254 return -ENXIO;
255 }
256 }
257
258 /* Now try the specified ISA cards */
259
260 for (i = 0; i < MAX_ISA_BOARD; i++) {
261 RamIO = ioremap_nocache(mem + (LEN_RAM_IO * i), LEN_RAM_IO);
262
263 if (!RamIO) {
264 printk(KERN_INFO "ac.o: Failed to ioremap the ISA card's memory space (slot #%d)\n", i + 1);
265 continue;
266 }
267
268 if (!(boardno = ac_register_board((unsigned long)mem+ (LEN_RAM_IO*i),
269 RamIO,i+1))) {
270 iounmap(RamIO);
271 continue;
272 }
273
274 printk(KERN_NOTICE "Applicom ISA card found at mem 0x%lx, irq %d\n", mem + (LEN_RAM_IO*i), irq);
275
276 if (!numisa) {
277 if (request_irq(irq, &ac_interrupt, IRQF_SHARED, "Applicom ISA", &dummy)) {
278 printk(KERN_WARNING "Could not allocate IRQ %d for ISA Applicom device.\n", irq);
279 iounmap(RamIO);
280 apbs[boardno - 1].RamIO = NULL;
281 }
282 else
283 apbs[boardno - 1].irq = irq;
284 }
285 else
286 apbs[boardno - 1].irq = 0;
287
288 numisa++;
289 }
290
291 if (!numisa)
292 printk(KERN_WARNING "ac.o: No valid ISA Applicom boards found "
293 "at mem 0x%lx\n", mem);
294
295 fin:
296 init_waitqueue_head(&FlagSleepRec);
297
298 WriteErrorCount = 0;
299 ReadErrorCount = 0;
300 DeviceErrorCount = 0;
301
302 if (numboards) {
303 ret = misc_register(&ac_miscdev);
304 if (ret) {
305 printk(KERN_WARNING "ac.o: Unable to register misc device\n");
306 goto out;
307 }
308 for (i = 0; i < MAX_BOARD; i++) {
309 int serial;
310 char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1];
311
312 if (!apbs[i].RamIO)
313 continue;
314
315 for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++)
316 boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial);
317
318 boardname[serial] = 0;
319
320
321 printk(KERN_INFO "Applicom board %d: %s, PROM V%d.%d",
322 i+1, boardname,
323 (int)(readb(apbs[i].RamIO + VERS) >> 4),
324 (int)(readb(apbs[i].RamIO + VERS) & 0xF));
325
326 serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) +
327 (readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) +
328 (readb(apbs[i].RamIO + SERIAL_NUMBER + 2) );
329
330 if (serial != 0)
331 printk(" S/N %d\n", serial);
332 else
333 printk("\n");
334 }
335 return 0;
336 }
337
338 else
339 return -ENXIO;
340
341 out:
342 for (i = 0; i < MAX_BOARD; i++) {
343 if (!apbs[i].RamIO)
344 continue;
345 if (apbs[i].irq)
346 free_irq(apbs[i].irq, &dummy);
347 iounmap(apbs[i].RamIO);
348 }
349 return ret;
350 }
351
352 module_init(applicom_init);
353 module_exit(applicom_exit);
354
355
356 static ssize_t ac_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos)
357 {
358 unsigned int NumCard; /* Board number 1 -> 8 */
359 unsigned int IndexCard; /* Index board number 0 -> 7 */
360 unsigned char TicCard; /* Board TIC to send */
361 unsigned long flags; /* Current priority */
362 struct st_ram_io st_loc;
363 struct mailbox tmpmailbox;
364 #ifdef DEBUG
365 int c;
366 #endif
367 DECLARE_WAITQUEUE(wait, current);
368
369 if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) {
370 static int warncount = 5;
371 if (warncount) {
372 printk(KERN_INFO "Hmmm. write() of Applicom card, length %zd != expected %zd\n",
373 count, sizeof(struct st_ram_io) + sizeof(struct mailbox));
374 warncount--;
375 }
376 return -EINVAL;
377 }
378
379 if(copy_from_user(&st_loc, buf, sizeof(struct st_ram_io)))
380 return -EFAULT;
381
382 if(copy_from_user(&tmpmailbox, &buf[sizeof(struct st_ram_io)],
383 sizeof(struct mailbox)))
384 return -EFAULT;
385
386 NumCard = st_loc.num_card; /* board number to send */
387 TicCard = st_loc.tic_des_from_pc; /* tic number to send */
388 IndexCard = NumCard - 1;
389
390 if (IndexCard >= MAX_BOARD)
391 return -EINVAL;
392 IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
393
394 if (!apbs[IndexCard].RamIO)
395 return -EINVAL;
396
397 #ifdef DEBUG
398 printk("Write to applicom card #%d. struct st_ram_io follows:",
399 IndexCard+1);
400
401 for (c = 0; c < sizeof(struct st_ram_io);) {
402
403 printk("\n%5.5X: %2.2X", c, ((unsigned char *) &st_loc)[c]);
404
405 for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) {
406 printk(" %2.2X", ((unsigned char *) &st_loc)[c]);
407 }
408 }
409
410 printk("\nstruct mailbox follows:");
411
412 for (c = 0; c < sizeof(struct mailbox);) {
413 printk("\n%5.5X: %2.2X", c, ((unsigned char *) &tmpmailbox)[c]);
414
415 for (c++; c % 8 && c < sizeof(struct mailbox); c++) {
416 printk(" %2.2X", ((unsigned char *) &tmpmailbox)[c]);
417 }
418 }
419
420 printk("\n");
421 #endif
422
423 spin_lock_irqsave(&apbs[IndexCard].mutex, flags);
424
425 /* Test octet ready correct */
426 if(readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) > 2) {
427 Dummy = readb(apbs[IndexCard].RamIO + VERS);
428 spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
429 printk(KERN_WARNING "APPLICOM driver write error board %d, DataFromPcReady = %d\n",
430 IndexCard,(int)readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY));
431 DeviceErrorCount++;
432 return -EIO;
433 }
434
435 /* Place ourselves on the wait queue */
436 set_current_state(TASK_INTERRUPTIBLE);
437 add_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait);
438
439 /* Check whether the card is ready for us */
440 while (readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) != 0) {
441 Dummy = readb(apbs[IndexCard].RamIO + VERS);
442 /* It's busy. Sleep. */
443
444 spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
445 schedule();
446 if (signal_pending(current)) {
447 remove_wait_queue(&apbs[IndexCard].FlagSleepSend,
448 &wait);
449 return -EINTR;
450 }
451 spin_lock_irqsave(&apbs[IndexCard].mutex, flags);
452 set_current_state(TASK_INTERRUPTIBLE);
453 }
454
455 /* We may not have actually slept */
456 set_current_state(TASK_RUNNING);
457 remove_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait);
458
459 writeb(1, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
460
461 /* Which is best - lock down the pages with rawio and then
462 copy directly, or use bounce buffers? For now we do the latter
463 because it works with 2.2 still */
464 {
465 unsigned char *from = (unsigned char *) &tmpmailbox;
466 void __iomem *to = apbs[IndexCard].RamIO + RAM_FROM_PC;
467 int c;
468
469 for (c = 0; c < sizeof(struct mailbox); c++)
470 writeb(*(from++), to++);
471 }
472
473 writeb(0x20, apbs[IndexCard].RamIO + TIC_OWNER_FROM_PC);
474 writeb(0xff, apbs[IndexCard].RamIO + NUMCARD_OWNER_FROM_PC);
475 writeb(TicCard, apbs[IndexCard].RamIO + TIC_DES_FROM_PC);
476 writeb(NumCard, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC);
477 writeb(2, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
478 writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
479 Dummy = readb(apbs[IndexCard].RamIO + VERS);
480 spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
481 return 0;
482 }
483
484 static int do_ac_read(int IndexCard, char __user *buf,
485 struct st_ram_io *st_loc, struct mailbox *mailbox)
486 {
487 void __iomem *from = apbs[IndexCard].RamIO + RAM_TO_PC;
488 unsigned char *to = (unsigned char *)mailbox;
489 #ifdef DEBUG
490 int c;
491 #endif
492
493 st_loc->tic_owner_to_pc = readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC);
494 st_loc->numcard_owner_to_pc = readb(apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC);
495
496
497 {
498 int c;
499
500 for (c = 0; c < sizeof(struct mailbox); c++)
501 *(to++) = readb(from++);
502 }
503 writeb(1, apbs[IndexCard].RamIO + ACK_FROM_PC_READY);
504 writeb(1, apbs[IndexCard].RamIO + TYP_ACK_FROM_PC);
505 writeb(IndexCard+1, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC);
506 writeb(readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC),
507 apbs[IndexCard].RamIO + TIC_ACK_FROM_PC);
508 writeb(2, apbs[IndexCard].RamIO + ACK_FROM_PC_READY);
509 writeb(0, apbs[IndexCard].RamIO + DATA_TO_PC_READY);
510 writeb(2, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
511 Dummy = readb(apbs[IndexCard].RamIO + VERS);
512
513 #ifdef DEBUG
514 printk("Read from applicom card #%d. struct st_ram_io follows:", NumCard);
515
516 for (c = 0; c < sizeof(struct st_ram_io);) {
517 printk("\n%5.5X: %2.2X", c, ((unsigned char *)st_loc)[c]);
518
519 for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) {
520 printk(" %2.2X", ((unsigned char *)st_loc)[c]);
521 }
522 }
523
524 printk("\nstruct mailbox follows:");
525
526 for (c = 0; c < sizeof(struct mailbox);) {
527 printk("\n%5.5X: %2.2X", c, ((unsigned char *)mailbox)[c]);
528
529 for (c++; c % 8 && c < sizeof(struct mailbox); c++) {
530 printk(" %2.2X", ((unsigned char *)mailbox)[c]);
531 }
532 }
533 printk("\n");
534 #endif
535 return (sizeof(struct st_ram_io) + sizeof(struct mailbox));
536 }
537
538 static ssize_t ac_read (struct file *filp, char __user *buf, size_t count, loff_t *ptr)
539 {
540 unsigned long flags;
541 unsigned int i;
542 unsigned char tmp;
543 int ret = 0;
544 DECLARE_WAITQUEUE(wait, current);
545 #ifdef DEBUG
546 int loopcount=0;
547 #endif
548 /* No need to ratelimit this. Only root can trigger it anyway */
549 if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) {
550 printk( KERN_WARNING "Hmmm. read() of Applicom card, length %zd != expected %zd\n",
551 count,sizeof(struct st_ram_io) + sizeof(struct mailbox));
552 return -EINVAL;
553 }
554
555 while(1) {
556 /* Stick ourself on the wait queue */
557 set_current_state(TASK_INTERRUPTIBLE);
558 add_wait_queue(&FlagSleepRec, &wait);
559
560 /* Scan each board, looking for one which has a packet for us */
561 for (i=0; i < MAX_BOARD; i++) {
562 if (!apbs[i].RamIO)
563 continue;
564 spin_lock_irqsave(&apbs[i].mutex, flags);
565
566 tmp = readb(apbs[i].RamIO + DATA_TO_PC_READY);
567
568 if (tmp == 2) {
569 struct st_ram_io st_loc;
570 struct mailbox mailbox;
571
572 /* Got a packet for us */
573 memset(&st_loc, 0, sizeof(st_loc));
574 ret = do_ac_read(i, buf, &st_loc, &mailbox);
575 spin_unlock_irqrestore(&apbs[i].mutex, flags);
576 set_current_state(TASK_RUNNING);
577 remove_wait_queue(&FlagSleepRec, &wait);
578
579 if (copy_to_user(buf, &st_loc, sizeof(st_loc)))
580 return -EFAULT;
581 if (copy_to_user(buf + sizeof(st_loc), &mailbox, sizeof(mailbox)))
582 return -EFAULT;
583 return tmp;
584 }
585
586 if (tmp > 2) {
587 /* Got an error */
588 Dummy = readb(apbs[i].RamIO + VERS);
589
590 spin_unlock_irqrestore(&apbs[i].mutex, flags);
591 set_current_state(TASK_RUNNING);
592 remove_wait_queue(&FlagSleepRec, &wait);
593
594 printk(KERN_WARNING "APPLICOM driver read error board %d, DataToPcReady = %d\n",
595 i,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY));
596 DeviceErrorCount++;
597 return -EIO;
598 }
599
600 /* Nothing for us. Try the next board */
601 Dummy = readb(apbs[i].RamIO + VERS);
602 spin_unlock_irqrestore(&apbs[i].mutex, flags);
603
604 } /* per board */
605
606 /* OK - No boards had data for us. Sleep now */
607
608 schedule();
609 remove_wait_queue(&FlagSleepRec, &wait);
610
611 if (signal_pending(current))
612 return -EINTR;
613
614 #ifdef DEBUG
615 if (loopcount++ > 2) {
616 printk(KERN_DEBUG "Looping in ac_read. loopcount %d\n", loopcount);
617 }
618 #endif
619 }
620 }
621
622 static irqreturn_t ac_interrupt(int vec, void *dev_instance)
623 {
624 unsigned int i;
625 unsigned int FlagInt;
626 unsigned int LoopCount;
627 int handled = 0;
628
629 // printk("Applicom interrupt on IRQ %d occurred\n", vec);
630
631 LoopCount = 0;
632
633 do {
634 FlagInt = 0;
635 for (i = 0; i < MAX_BOARD; i++) {
636
637 /* Skip if this board doesn't exist */
638 if (!apbs[i].RamIO)
639 continue;
640
641 spin_lock(&apbs[i].mutex);
642
643 /* Skip if this board doesn't want attention */
644 if(readb(apbs[i].RamIO + RAM_IT_TO_PC) == 0) {
645 spin_unlock(&apbs[i].mutex);
646 continue;
647 }
648
649 handled = 1;
650 FlagInt = 1;
651 writeb(0, apbs[i].RamIO + RAM_IT_TO_PC);
652
653 if (readb(apbs[i].RamIO + DATA_TO_PC_READY) > 2) {
654 printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataToPcReady = %d\n",
655 i+1,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY));
656 DeviceErrorCount++;
657 }
658
659 if((readb(apbs[i].RamIO + DATA_FROM_PC_READY) > 2) &&
660 (readb(apbs[i].RamIO + DATA_FROM_PC_READY) != 6)) {
661
662 printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataFromPcReady = %d\n",
663 i+1,(int)readb(apbs[i].RamIO + DATA_FROM_PC_READY));
664 DeviceErrorCount++;
665 }
666
667 if (readb(apbs[i].RamIO + DATA_TO_PC_READY) == 2) { /* mailbox sent by the card ? */
668 if (waitqueue_active(&FlagSleepRec)) {
669 wake_up_interruptible(&FlagSleepRec);
670 }
671 }
672
673 if (readb(apbs[i].RamIO + DATA_FROM_PC_READY) == 0) { /* ram i/o free for write by pc ? */
674 if (waitqueue_active(&apbs[i].FlagSleepSend)) { /* process sleep during read ? */
675 wake_up_interruptible(&apbs[i].FlagSleepSend);
676 }
677 }
678 Dummy = readb(apbs[i].RamIO + VERS);
679
680 if(readb(apbs[i].RamIO + RAM_IT_TO_PC)) {
681 /* There's another int waiting on this card */
682 spin_unlock(&apbs[i].mutex);
683 i--;
684 } else {
685 spin_unlock(&apbs[i].mutex);
686 }
687 }
688 if (FlagInt)
689 LoopCount = 0;
690 else
691 LoopCount++;
692 } while(LoopCount < 2);
693 return IRQ_RETVAL(handled);
694 }
695
696
697
698 static long ac_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
699
700 { /* @ ADG ou ATO selon le cas */
701 int i;
702 unsigned char IndexCard;
703 void __iomem *pmem;
704 int ret = 0;
705 static int warncount = 10;
706 volatile unsigned char byte_reset_it;
707 struct st_ram_io *adgl;
708 void __user *argp = (void __user *)arg;
709
710 /* In general, the device is only openable by root anyway, so we're not
711 particularly concerned that bogus ioctls can flood the console. */
712
713 adgl = memdup_user(argp, sizeof(struct st_ram_io));
714 if (IS_ERR(adgl))
715 return PTR_ERR(adgl);
716
717 mutex_lock(&ac_mutex);
718 IndexCard = adgl->num_card-1;
719
720 if (cmd != 6 && IndexCard >= MAX_BOARD)
721 goto err;
722 IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
723
724 if (cmd != 6 && !apbs[IndexCard].RamIO)
725 goto err;
726
727 switch (cmd) {
728
729 case 0:
730 pmem = apbs[IndexCard].RamIO;
731 for (i = 0; i < sizeof(struct st_ram_io); i++)
732 ((unsigned char *)adgl)[i]=readb(pmem++);
733 if (copy_to_user(argp, adgl, sizeof(struct st_ram_io)))
734 ret = -EFAULT;
735 break;
736 case 1:
737 pmem = apbs[IndexCard].RamIO + CONF_END_TEST;
738 for (i = 0; i < 4; i++)
739 adgl->conf_end_test[i] = readb(pmem++);
740 for (i = 0; i < 2; i++)
741 adgl->error_code[i] = readb(pmem++);
742 for (i = 0; i < 4; i++)
743 adgl->parameter_error[i] = readb(pmem++);
744 pmem = apbs[IndexCard].RamIO + VERS;
745 adgl->vers = readb(pmem);
746 pmem = apbs[IndexCard].RamIO + TYPE_CARD;
747 for (i = 0; i < 20; i++)
748 adgl->reserv1[i] = readb(pmem++);
749 *(int *)&adgl->reserv1[20] =
750 (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER) << 16) +
751 (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 1) << 8) +
752 (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 2) );
753
754 if (copy_to_user(argp, adgl, sizeof(struct st_ram_io)))
755 ret = -EFAULT;
756 break;
757 case 2:
758 pmem = apbs[IndexCard].RamIO + CONF_END_TEST;
759 for (i = 0; i < 10; i++)
760 writeb(0xff, pmem++);
761 writeb(adgl->data_from_pc_ready,
762 apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
763
764 writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
765
766 for (i = 0; i < MAX_BOARD; i++) {
767 if (apbs[i].RamIO) {
768 byte_reset_it = readb(apbs[i].RamIO + RAM_IT_TO_PC);
769 }
770 }
771 break;
772 case 3:
773 pmem = apbs[IndexCard].RamIO + TIC_DES_FROM_PC;
774 writeb(adgl->tic_des_from_pc, pmem);
775 break;
776 case 4:
777 pmem = apbs[IndexCard].RamIO + TIC_OWNER_TO_PC;
778 adgl->tic_owner_to_pc = readb(pmem++);
779 adgl->numcard_owner_to_pc = readb(pmem);
780 if (copy_to_user(argp, adgl,sizeof(struct st_ram_io)))
781 ret = -EFAULT;
782 break;
783 case 5:
784 writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC);
785 writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC);
786 writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC);
787 writeb(4, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
788 writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
789 break;
790 case 6:
791 printk(KERN_INFO "APPLICOM driver release .... V2.8.0 ($Revision: 1.30 $)\n");
792 printk(KERN_INFO "Number of installed boards . %d\n", (int) numboards);
793 printk(KERN_INFO "Segment of board ........... %X\n", (int) mem);
794 printk(KERN_INFO "Interrupt IRQ number ....... %d\n", (int) irq);
795 for (i = 0; i < MAX_BOARD; i++) {
796 int serial;
797 char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1];
798
799 if (!apbs[i].RamIO)
800 continue;
801
802 for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++)
803 boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial);
804 boardname[serial] = 0;
805
806 printk(KERN_INFO "Prom version board %d ....... V%d.%d %s",
807 i+1,
808 (int)(readb(apbs[i].RamIO + VERS) >> 4),
809 (int)(readb(apbs[i].RamIO + VERS) & 0xF),
810 boardname);
811
812
813 serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) +
814 (readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) +
815 (readb(apbs[i].RamIO + SERIAL_NUMBER + 2) );
816
817 if (serial != 0)
818 printk(" S/N %d\n", serial);
819 else
820 printk("\n");
821 }
822 if (DeviceErrorCount != 0)
823 printk(KERN_INFO "DeviceErrorCount ........... %d\n", DeviceErrorCount);
824 if (ReadErrorCount != 0)
825 printk(KERN_INFO "ReadErrorCount ............. %d\n", ReadErrorCount);
826 if (WriteErrorCount != 0)
827 printk(KERN_INFO "WriteErrorCount ............ %d\n", WriteErrorCount);
828 if (waitqueue_active(&FlagSleepRec))
829 printk(KERN_INFO "Process in read pending\n");
830 for (i = 0; i < MAX_BOARD; i++) {
831 if (apbs[i].RamIO && waitqueue_active(&apbs[i].FlagSleepSend))
832 printk(KERN_INFO "Process in write pending board %d\n",i+1);
833 }
834 break;
835 default:
836 ret = -ENOTTY;
837 break;
838 }
839 Dummy = readb(apbs[IndexCard].RamIO + VERS);
840 kfree(adgl);
841 mutex_unlock(&ac_mutex);
842 return 0;
843
844 err:
845 if (warncount) {
846 pr_warn("APPLICOM driver IOCTL, bad board number %d\n",
847 (int)IndexCard + 1);
848 warncount--;
849 }
850 kfree(adgl);
851 mutex_unlock(&ac_mutex);
852 return -EINVAL;
853
854 }
855
Linux with added FPC-III support