drivers/irqchip/irq-mips-cpu.c

   1 /*
   2  * Copyright 2001 MontaVista Software Inc.
   3  * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
   4  *
   5  * Copyright (C) 2001 Ralf Baechle
   6  * Copyright (C) 2005  MIPS Technologies, Inc.  All rights reserved.
   7  *      Author: Maciej W. Rozycki <macro@mips.com>
   8  *
   9  * This file define the irq handler for MIPS CPU interrupts.
  10  *
  11  * This program is free software; you can redistribute  it and/or modify it
  12  * under  the terms of  the GNU General  Public License as published by the
  13  * Free Software Foundation;  either version 2 of the  License, or (at your
  14  * option) any later version.
  15  */
  16
  17 /*
  18  * Almost all MIPS CPUs define 8 interrupt sources.  They are typically
  19  * level triggered (i.e., cannot be cleared from CPU; must be cleared from
  20  * device).  The first two are software interrupts which we don't really
  21  * use or support.  The last one is usually the CPU timer interrupt if
  22  * counter register is present or, for CPUs with an external FPU, by
  23  * convention it's the FPU exception interrupt.
  24  *
  25  * Don't even think about using this on SMP.  You have been warned.
  26  *
  27  * This file exports one global function:
  28  *      void mips_cpu_irq_init(void);
  29  */
  30 #include <linux/init.h>
  31 #include <linux/interrupt.h>
  32 #include <linux/kernel.h>
  33 #include <linux/irq.h>
  34 #include <linux/irqchip.h>
  35 #include <linux/irqdomain.h>
  36
  37 #include <asm/irq_cpu.h>
  38 #include <asm/mipsregs.h>
  39 #include <asm/mipsmtregs.h>
  40 #include <asm/setup.h>
  41
  42 static inline void unmask_mips_irq(struct irq_data *d)
  43 {
  44         set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
  45         irq_enable_hazard();
  46 }
  47
  48 static inline void mask_mips_irq(struct irq_data *d)
  49 {
  50         clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
  51         irq_disable_hazard();
  52 }
  53
  54 static struct irq_chip mips_cpu_irq_controller = {
  55         .name           = "MIPS",
  56         .irq_ack        = mask_mips_irq,
  57         .irq_mask       = mask_mips_irq,
  58         .irq_mask_ack   = mask_mips_irq,
  59         .irq_unmask     = unmask_mips_irq,
  60         .irq_eoi        = unmask_mips_irq,
  61         .irq_disable    = mask_mips_irq,
  62         .irq_enable     = unmask_mips_irq,
  63 };
  64
  65 /*
  66  * Basically the same as above but taking care of all the MT stuff
  67  */
  68
  69 static unsigned int mips_mt_cpu_irq_startup(struct irq_data *d)
  70 {
  71         unsigned int vpflags = dvpe();
  72
  73         clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
  74         evpe(vpflags);
  75         unmask_mips_irq(d);
  76         return 0;
  77 }
  78
  79 /*
  80  * While we ack the interrupt interrupts are disabled and thus we don't need
  81  * to deal with concurrency issues.  Same for mips_cpu_irq_end.
  82  */
  83 static void mips_mt_cpu_irq_ack(struct irq_data *d)
  84 {
  85         unsigned int vpflags = dvpe();
  86         clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
  87         evpe(vpflags);
  88         mask_mips_irq(d);
  89 }
  90
  91 static struct irq_chip mips_mt_cpu_irq_controller = {
  92         .name           = "MIPS",
  93         .irq_startup    = mips_mt_cpu_irq_startup,
  94         .irq_ack        = mips_mt_cpu_irq_ack,
  95         .irq_mask       = mask_mips_irq,
  96         .irq_mask_ack   = mips_mt_cpu_irq_ack,
  97         .irq_unmask     = unmask_mips_irq,
  98         .irq_eoi        = unmask_mips_irq,
  99         .irq_disable    = mask_mips_irq,
 100         .irq_enable     = unmask_mips_irq,
 101 };
 102
 103 asmlinkage void __weak plat_irq_dispatch(void)
 104 {
 105         unsigned long pending = read_c0_cause() & read_c0_status() & ST0_IM;
 106         int irq;
 107
 108         if (!pending) {
 109                 spurious_interrupt();
 110                 return;
 111         }
 112
 113         pending >>= CAUSEB_IP;
 114         while (pending) {
 115                 irq = fls(pending) - 1;
 116                 do_IRQ(MIPS_CPU_IRQ_BASE + irq);
 117                 pending &= ~BIT(irq);
 118         }
 119 }
 120
 121 static int mips_cpu_intc_map(struct irq_domain *d, unsigned int irq,
 122                              irq_hw_number_t hw)
 123 {
 124         static struct irq_chip *chip;
 125
 126         if (hw < 2 && cpu_has_mipsmt) {
 127                 /* Software interrupts are used for MT/CMT IPI */
 128                 chip = &mips_mt_cpu_irq_controller;
 129         } else {
 130                 chip = &mips_cpu_irq_controller;
 131         }
 132
 133         if (cpu_has_vint)
 134                 set_vi_handler(hw, plat_irq_dispatch);
 135
 136         irq_set_chip_and_handler(irq, chip, handle_percpu_irq);
 137
 138         return 0;
 139 }
 140
 141 static const struct irq_domain_ops mips_cpu_intc_irq_domain_ops = {
 142         .map = mips_cpu_intc_map,
 143         .xlate = irq_domain_xlate_onecell,
 144 };
 145
 146 static void __init __mips_cpu_irq_init(struct device_node *of_node)
 147 {
 148         struct irq_domain *domain;
 149
 150         /* Mask interrupts. */
 151         clear_c0_status(ST0_IM);
 152         clear_c0_cause(CAUSEF_IP);
 153
 154         domain = irq_domain_add_legacy(of_node, 8, MIPS_CPU_IRQ_BASE, 0,
 155                                        &mips_cpu_intc_irq_domain_ops, NULL);
 156         if (!domain)
 157                 panic("Failed to add irqdomain for MIPS CPU");
 158 }
 159
 160 void __init mips_cpu_irq_init(void)
 161 {
 162         __mips_cpu_irq_init(NULL);
 163 }
 164
 165 int __init mips_cpu_irq_of_init(struct device_node *of_node,
 166                                 struct device_node *parent)
 167 {
 168         __mips_cpu_irq_init(of_node);
 169         return 0;
 170 }
 171 IRQCHIP_DECLARE(cpu_intc, "mti,cpu-interrupt-controller", mips_cpu_irq_of_init);