drivers/cpufreq/s3c2416-cpufreq.c

   1 /*
   2  * S3C2416/2450 CPUfreq Support
   3  *
   4  * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
   5  *
   6  * based on s3c64xx_cpufreq.c
   7  *
   8  * Copyright 2009 Wolfson Microelectronics plc
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/types.h>
  17 #include <linux/init.h>
  18 #include <linux/cpufreq.h>
  19 #include <linux/clk.h>
  20 #include <linux/err.h>
  21 #include <linux/regulator/consumer.h>
  22 #include <linux/reboot.h>
  23 #include <linux/module.h>
  24
  25 static DEFINE_MUTEX(cpufreq_lock);
  26
  27 struct s3c2416_data {
  28         struct clk *armdiv;
  29         struct clk *armclk;
  30         struct clk *hclk;
  31
  32         unsigned long regulator_latency;
  33 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
  34         struct regulator *vddarm;
  35 #endif
  36
  37         struct cpufreq_frequency_table *freq_table;
  38
  39         bool is_dvs;
  40         bool disable_dvs;
  41 };
  42
  43 static struct s3c2416_data s3c2416_cpufreq;
  44
  45 struct s3c2416_dvfs {
  46         unsigned int vddarm_min;
  47         unsigned int vddarm_max;
  48 };
  49
  50 /* pseudo-frequency for dvs mode */
  51 #define FREQ_DVS        132333
  52
  53 /* frequency to sleep and reboot in
  54  * it's essential to leave dvs, as some boards do not reconfigure the
  55  * regulator on reboot
  56  */
  57 #define FREQ_SLEEP      133333
  58
  59 /* Sources for the ARMCLK */
  60 #define SOURCE_HCLK     0
  61 #define SOURCE_ARMDIV   1
  62
  63 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
  64 /* S3C2416 only supports changing the voltage in the dvs-mode.
  65  * Voltages down to 1.0V seem to work, so we take what the regulator
  66  * can get us.
  67  */
  68 static struct s3c2416_dvfs s3c2416_dvfs_table[] = {
  69         [SOURCE_HCLK] = {  950000, 1250000 },
  70         [SOURCE_ARMDIV] = { 1250000, 1350000 },
  71 };
  72 #endif
  73
  74 static struct cpufreq_frequency_table s3c2416_freq_table[] = {
  75         { 0, SOURCE_HCLK, FREQ_DVS },
  76         { 0, SOURCE_ARMDIV, 133333 },
  77         { 0, SOURCE_ARMDIV, 266666 },
  78         { 0, SOURCE_ARMDIV, 400000 },
  79         { 0, 0, CPUFREQ_TABLE_END },
  80 };
  81
  82 static struct cpufreq_frequency_table s3c2450_freq_table[] = {
  83         { 0, SOURCE_HCLK, FREQ_DVS },
  84         { 0, SOURCE_ARMDIV, 133500 },
  85         { 0, SOURCE_ARMDIV, 267000 },
  86         { 0, SOURCE_ARMDIV, 534000 },
  87         { 0, 0, CPUFREQ_TABLE_END },
  88 };
  89
  90 static unsigned int s3c2416_cpufreq_get_speed(unsigned int cpu)
  91 {
  92         struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
  93
  94         if (cpu != 0)
  95                 return 0;
  96
  97         /* return our pseudo-frequency when in dvs mode */
  98         if (s3c_freq->is_dvs)
  99                 return FREQ_DVS;
 100
 101         return clk_get_rate(s3c_freq->armclk) / 1000;
 102 }
 103
 104 static int s3c2416_cpufreq_set_armdiv(struct s3c2416_data *s3c_freq,
 105                                       unsigned int freq)
 106 {
 107         int ret;
 108
 109         if (clk_get_rate(s3c_freq->armdiv) / 1000 != freq) {
 110                 ret = clk_set_rate(s3c_freq->armdiv, freq * 1000);
 111                 if (ret < 0) {
 112                         pr_err("cpufreq: Failed to set armdiv rate %dkHz: %d\n",
 113                                freq, ret);
 114                         return ret;
 115                 }
 116         }
 117
 118         return 0;
 119 }
 120
 121 static int s3c2416_cpufreq_enter_dvs(struct s3c2416_data *s3c_freq, int idx)
 122 {
 123 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
 124         struct s3c2416_dvfs *dvfs;
 125 #endif
 126         int ret;
 127
 128         if (s3c_freq->is_dvs) {
 129                 pr_debug("cpufreq: already in dvs mode, nothing to do\n");
 130                 return 0;
 131         }
 132
 133         pr_debug("cpufreq: switching armclk to hclk (%lukHz)\n",
 134                  clk_get_rate(s3c_freq->hclk) / 1000);
 135         ret = clk_set_parent(s3c_freq->armclk, s3c_freq->hclk);
 136         if (ret < 0) {
 137                 pr_err("cpufreq: Failed to switch armclk to hclk: %d\n", ret);
 138                 return ret;
 139         }
 140
 141 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
 142         /* changing the core voltage is only allowed when in dvs mode */
 143         if (s3c_freq->vddarm) {
 144                 dvfs = &s3c2416_dvfs_table[idx];
 145
 146                 pr_debug("cpufreq: setting regulator to %d-%d\n",
 147                          dvfs->vddarm_min, dvfs->vddarm_max);
 148                 ret = regulator_set_voltage(s3c_freq->vddarm,
 149                                             dvfs->vddarm_min,
 150                                             dvfs->vddarm_max);
 151
 152                 /* when lowering the voltage failed, there is nothing to do */
 153                 if (ret != 0)
 154                         pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
 155         }
 156 #endif
 157
 158         s3c_freq->is_dvs = 1;
 159
 160         return 0;
 161 }
 162
 163 static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx)
 164 {
 165 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
 166         struct s3c2416_dvfs *dvfs;
 167 #endif
 168         int ret;
 169
 170         if (!s3c_freq->is_dvs) {
 171                 pr_debug("cpufreq: not in dvs mode, so can't leave\n");
 172                 return 0;
 173         }
 174
 175 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
 176         if (s3c_freq->vddarm) {
 177                 dvfs = &s3c2416_dvfs_table[idx];
 178
 179                 pr_debug("cpufreq: setting regulator to %d-%d\n",
 180                          dvfs->vddarm_min, dvfs->vddarm_max);
 181                 ret = regulator_set_voltage(s3c_freq->vddarm,
 182                                             dvfs->vddarm_min,
 183                                             dvfs->vddarm_max);
 184                 if (ret != 0) {
 185                         pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
 186                         return ret;
 187                 }
 188         }
 189 #endif
 190
 191         /* force armdiv to hclk frequency for transition from dvs*/
 192         if (clk_get_rate(s3c_freq->armdiv) > clk_get_rate(s3c_freq->hclk)) {
 193                 pr_debug("cpufreq: force armdiv to hclk frequency (%lukHz)\n",
 194                          clk_get_rate(s3c_freq->hclk) / 1000);
 195                 ret = s3c2416_cpufreq_set_armdiv(s3c_freq,
 196                                         clk_get_rate(s3c_freq->hclk) / 1000);
 197                 if (ret < 0) {
 198                         pr_err("cpufreq: Failed to set the armdiv to %lukHz: %d\n",
 199                                clk_get_rate(s3c_freq->hclk) / 1000, ret);
 200                         return ret;
 201                 }
 202         }
 203
 204         pr_debug("cpufreq: switching armclk parent to armdiv (%lukHz)\n",
 205                         clk_get_rate(s3c_freq->armdiv) / 1000);
 206
 207         ret = clk_set_parent(s3c_freq->armclk, s3c_freq->armdiv);
 208         if (ret < 0) {
 209                 pr_err("cpufreq: Failed to switch armclk clock parent to armdiv: %d\n",
 210                        ret);
 211                 return ret;
 212         }
 213
 214         s3c_freq->is_dvs = 0;
 215
 216         return 0;
 217 }
 218
 219 static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy,
 220                                       unsigned int index)
 221 {
 222         struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
 223         unsigned int new_freq;
 224         int idx, ret, to_dvs = 0;
 225
 226         mutex_lock(&cpufreq_lock);
 227
 228         idx = s3c_freq->freq_table[index].driver_data;
 229
 230         if (idx == SOURCE_HCLK)
 231                 to_dvs = 1;
 232
 233         /* switching to dvs when it's not allowed */
 234         if (to_dvs && s3c_freq->disable_dvs) {
 235                 pr_debug("cpufreq: entering dvs mode not allowed\n");
 236                 ret = -EINVAL;
 237                 goto out;
 238         }
 239
 240         /* When leavin dvs mode, always switch the armdiv to the hclk rate
 241          * The S3C2416 has stability issues when switching directly to
 242          * higher frequencies.
 243          */
 244         new_freq = (s3c_freq->is_dvs && !to_dvs)
 245                                 ? clk_get_rate(s3c_freq->hclk) / 1000
 246                                 : s3c_freq->freq_table[index].frequency;
 247
 248         if (to_dvs) {
 249                 pr_debug("cpufreq: enter dvs\n");
 250                 ret = s3c2416_cpufreq_enter_dvs(s3c_freq, idx);
 251         } else if (s3c_freq->is_dvs) {
 252                 pr_debug("cpufreq: leave dvs\n");
 253                 ret = s3c2416_cpufreq_leave_dvs(s3c_freq, idx);
 254         } else {
 255                 pr_debug("cpufreq: change armdiv to %dkHz\n", new_freq);
 256                 ret = s3c2416_cpufreq_set_armdiv(s3c_freq, new_freq);
 257         }
 258
 259 out:
 260         mutex_unlock(&cpufreq_lock);
 261
 262         return ret;
 263 }
 264
 265 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
 266 static void s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
 267 {
 268         int count, v, i, found;
 269         struct cpufreq_frequency_table *pos;
 270         struct s3c2416_dvfs *dvfs;
 271
 272         count = regulator_count_voltages(s3c_freq->vddarm);
 273         if (count < 0) {
 274                 pr_err("cpufreq: Unable to check supported voltages\n");
 275                 return;
 276         }
 277
 278         if (!count)
 279                 goto out;
 280
 281         cpufreq_for_each_valid_entry(pos, s3c_freq->freq_table) {
 282                 dvfs = &s3c2416_dvfs_table[pos->driver_data];
 283                 found = 0;
 284
 285                 /* Check only the min-voltage, more is always ok on S3C2416 */
 286                 for (i = 0; i < count; i++) {
 287                         v = regulator_list_voltage(s3c_freq->vddarm, i);
 288                         if (v >= dvfs->vddarm_min)
 289                                 found = 1;
 290                 }
 291
 292                 if (!found) {
 293                         pr_debug("cpufreq: %dkHz unsupported by regulator\n",
 294                                  pos->frequency);
 295                         pos->frequency = CPUFREQ_ENTRY_INVALID;
 296                 }
 297         }
 298
 299 out:
 300         /* Guessed */
 301         s3c_freq->regulator_latency = 1 * 1000 * 1000;
 302 }
 303 #endif
 304
 305 static int s3c2416_cpufreq_reboot_notifier_evt(struct notifier_block *this,
 306                                                unsigned long event, void *ptr)
 307 {
 308         struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
 309         int ret;
 310
 311         mutex_lock(&cpufreq_lock);
 312
 313         /* disable further changes */
 314         s3c_freq->disable_dvs = 1;
 315
 316         mutex_unlock(&cpufreq_lock);
 317
 318         /* some boards don't reconfigure the regulator on reboot, which
 319          * could lead to undervolting the cpu when the clock is reset.
 320          * Therefore we always leave the DVS mode on reboot.
 321          */
 322         if (s3c_freq->is_dvs) {
 323                 pr_debug("cpufreq: leave dvs on reboot\n");
 324                 ret = cpufreq_driver_target(cpufreq_cpu_get(0), FREQ_SLEEP, 0);
 325                 if (ret < 0)
 326                         return NOTIFY_BAD;
 327         }
 328
 329         return NOTIFY_DONE;
 330 }
 331
 332 static struct notifier_block s3c2416_cpufreq_reboot_notifier = {
 333         .notifier_call = s3c2416_cpufreq_reboot_notifier_evt,
 334 };
 335
 336 static int s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
 337 {
 338         struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
 339         struct cpufreq_frequency_table *pos;
 340         struct clk *msysclk;
 341         unsigned long rate;
 342         int ret;
 343
 344         if (policy->cpu != 0)
 345                 return -EINVAL;
 346
 347         msysclk = clk_get(NULL, "msysclk");
 348         if (IS_ERR(msysclk)) {
 349                 ret = PTR_ERR(msysclk);
 350                 pr_err("cpufreq: Unable to obtain msysclk: %d\n", ret);
 351                 return ret;
 352         }
 353
 354         /*
 355          * S3C2416 and S3C2450 share the same processor-ID and also provide no
 356          * other means to distinguish them other than through the rate of
 357          * msysclk. On S3C2416 msysclk runs at 800MHz and on S3C2450 at 533MHz.
 358          */
 359         rate = clk_get_rate(msysclk);
 360         if (rate == 800 * 1000 * 1000) {
 361                 pr_info("cpufreq: msysclk running at %lukHz, using S3C2416 frequency table\n",
 362                         rate / 1000);
 363                 s3c_freq->freq_table = s3c2416_freq_table;
 364                 policy->cpuinfo.max_freq = 400000;
 365         } else if (rate / 1000 == 534000) {
 366                 pr_info("cpufreq: msysclk running at %lukHz, using S3C2450 frequency table\n",
 367                         rate / 1000);
 368                 s3c_freq->freq_table = s3c2450_freq_table;
 369                 policy->cpuinfo.max_freq = 534000;
 370         }
 371
 372         /* not needed anymore */
 373         clk_put(msysclk);
 374
 375         if (s3c_freq->freq_table == NULL) {
 376                 pr_err("cpufreq: No frequency information for this CPU, msysclk at %lukHz\n",
 377                        rate / 1000);
 378                 return -ENODEV;
 379         }
 380
 381         s3c_freq->is_dvs = 0;
 382
 383         s3c_freq->armdiv = clk_get(NULL, "armdiv");
 384         if (IS_ERR(s3c_freq->armdiv)) {
 385                 ret = PTR_ERR(s3c_freq->armdiv);
 386                 pr_err("cpufreq: Unable to obtain ARMDIV: %d\n", ret);
 387                 return ret;
 388         }
 389
 390         s3c_freq->hclk = clk_get(NULL, "hclk");
 391         if (IS_ERR(s3c_freq->hclk)) {
 392                 ret = PTR_ERR(s3c_freq->hclk);
 393                 pr_err("cpufreq: Unable to obtain HCLK: %d\n", ret);
 394                 goto err_hclk;
 395         }
 396
 397         /* chech hclk rate, we only support the common 133MHz for now
 398          * hclk could also run at 66MHz, but this not often used
 399          */
 400         rate = clk_get_rate(s3c_freq->hclk);
 401         if (rate < 133 * 1000 * 1000) {
 402                 pr_err("cpufreq: HCLK not at 133MHz\n");
 403                 ret = -EINVAL;
 404                 goto err_armclk;
 405         }
 406
 407         s3c_freq->armclk = clk_get(NULL, "armclk");
 408         if (IS_ERR(s3c_freq->armclk)) {
 409                 ret = PTR_ERR(s3c_freq->armclk);
 410                 pr_err("cpufreq: Unable to obtain ARMCLK: %d\n", ret);
 411                 goto err_armclk;
 412         }
 413
 414 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
 415         s3c_freq->vddarm = regulator_get(NULL, "vddarm");
 416         if (IS_ERR(s3c_freq->vddarm)) {
 417                 ret = PTR_ERR(s3c_freq->vddarm);
 418                 pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
 419                 goto err_vddarm;
 420         }
 421
 422         s3c2416_cpufreq_cfg_regulator(s3c_freq);
 423 #else
 424         s3c_freq->regulator_latency = 0;
 425 #endif
 426
 427         cpufreq_for_each_entry(pos, s3c_freq->freq_table) {
 428                 /* special handling for dvs mode */
 429                 if (pos->driver_data == 0) {
 430                         if (!s3c_freq->hclk) {
 431                                 pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n",
 432                                          pos->frequency);
 433                                 pos->frequency = CPUFREQ_ENTRY_INVALID;
 434                         } else {
 435                                 continue;
 436                         }
 437                 }
 438
 439                 /* Check for frequencies we can generate */
 440                 rate = clk_round_rate(s3c_freq->armdiv,
 441                                       pos->frequency * 1000);
 442                 rate /= 1000;
 443                 if (rate != pos->frequency) {
 444                         pr_debug("cpufreq: %dkHz unsupported by clock (clk_round_rate return %lu)\n",
 445                                 pos->frequency, rate);
 446                         pos->frequency = CPUFREQ_ENTRY_INVALID;
 447                 }
 448         }
 449
 450         /* Datasheet says PLL stabalisation time must be at least 300us,
 451          * so but add some fudge. (reference in LOCKCON0 register description)
 452          */
 453         ret = cpufreq_generic_init(policy, s3c_freq->freq_table,
 454                         (500 * 1000) + s3c_freq->regulator_latency);
 455         if (ret)
 456                 goto err_freq_table;
 457
 458         register_reboot_notifier(&s3c2416_cpufreq_reboot_notifier);
 459
 460         return 0;
 461
 462 err_freq_table:
 463 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
 464         regulator_put(s3c_freq->vddarm);
 465 err_vddarm:
 466 #endif
 467         clk_put(s3c_freq->armclk);
 468 err_armclk:
 469         clk_put(s3c_freq->hclk);
 470 err_hclk:
 471         clk_put(s3c_freq->armdiv);
 472
 473         return ret;
 474 }
 475
 476 static struct cpufreq_driver s3c2416_cpufreq_driver = {
 477         .flags          = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 478         .verify         = cpufreq_generic_frequency_table_verify,
 479         .target_index   = s3c2416_cpufreq_set_target,
 480         .get            = s3c2416_cpufreq_get_speed,
 481         .init           = s3c2416_cpufreq_driver_init,
 482         .name           = "s3c2416",
 483         .attr           = cpufreq_generic_attr,
 484 };
 485
 486 static int __init s3c2416_cpufreq_init(void)
 487 {
 488         return cpufreq_register_driver(&s3c2416_cpufreq_driver);
 489 }
 490 module_init(s3c2416_cpufreq_init);