mtd: dc21285: use raw spinlock functions for nw_gpio_lock
[linux/fpc-iii.git] / arch / mips / pci / ops-bcm63xx.c
blobd02eb9d16b55590e9740d1bde1e1b1178569896a
1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
6 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
7 */
9 #include <linux/types.h>
10 #include <linux/pci.h>
11 #include <linux/kernel.h>
12 #include <linux/delay.h>
13 #include <linux/io.h>
15 #include "pci-bcm63xx.h"
18 * swizzle 32bits data to return only the needed part
20 static int postprocess_read(u32 data, int where, unsigned int size)
22 u32 ret;
24 ret = 0;
25 switch (size) {
26 case 1:
27 ret = (data >> ((where & 3) << 3)) & 0xff;
28 break;
29 case 2:
30 ret = (data >> ((where & 3) << 3)) & 0xffff;
31 break;
32 case 4:
33 ret = data;
34 break;
36 return ret;
39 static int preprocess_write(u32 orig_data, u32 val, int where,
40 unsigned int size)
42 u32 ret;
44 ret = 0;
45 switch (size) {
46 case 1:
47 ret = (orig_data & ~(0xff << ((where & 3) << 3))) |
48 (val << ((where & 3) << 3));
49 break;
50 case 2:
51 ret = (orig_data & ~(0xffff << ((where & 3) << 3))) |
52 (val << ((where & 3) << 3));
53 break;
54 case 4:
55 ret = val;
56 break;
58 return ret;
62 * setup hardware for a configuration cycle with given parameters
64 static int bcm63xx_setup_cfg_access(int type, unsigned int busn,
65 unsigned int devfn, int where)
67 unsigned int slot, func, reg;
68 u32 val;
70 slot = PCI_SLOT(devfn);
71 func = PCI_FUNC(devfn);
72 reg = where >> 2;
74 /* sanity check */
75 if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT))
76 return 1;
78 if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT))
79 return 1;
81 if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT))
82 return 1;
84 /* ok, setup config access */
85 val = (reg << MPI_L2PCFG_REG_SHIFT);
86 val |= (func << MPI_L2PCFG_FUNC_SHIFT);
87 val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT);
88 val |= MPI_L2PCFG_CFG_USEREG_MASK;
89 val |= MPI_L2PCFG_CFG_SEL_MASK;
90 /* type 0 cycle for local bus, type 1 cycle for anything else */
91 if (type != 0) {
92 /* FIXME: how to specify bus ??? */
93 val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT);
95 bcm_mpi_writel(val, MPI_L2PCFG_REG);
97 return 0;
100 static int bcm63xx_do_cfg_read(int type, unsigned int busn,
101 unsigned int devfn, int where, int size,
102 u32 *val)
104 u32 data;
106 /* two phase cycle, first we write address, then read data at
107 * another location, caller already has a spinlock so no need
108 * to add one here */
109 if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
110 return PCIBIOS_DEVICE_NOT_FOUND;
111 iob();
112 data = le32_to_cpu(__raw_readl(pci_iospace_start));
113 /* restore IO space normal behaviour */
114 bcm_mpi_writel(0, MPI_L2PCFG_REG);
116 *val = postprocess_read(data, where, size);
118 return PCIBIOS_SUCCESSFUL;
121 static int bcm63xx_do_cfg_write(int type, unsigned int busn,
122 unsigned int devfn, int where, int size,
123 u32 val)
125 u32 data;
127 /* two phase cycle, first we write address, then write data to
128 * another location, caller already has a spinlock so no need
129 * to add one here */
130 if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
131 return PCIBIOS_DEVICE_NOT_FOUND;
132 iob();
134 data = le32_to_cpu(__raw_readl(pci_iospace_start));
135 data = preprocess_write(data, val, where, size);
137 __raw_writel(cpu_to_le32(data), pci_iospace_start);
138 wmb();
139 /* no way to know the access is done, we have to wait */
140 udelay(500);
141 /* restore IO space normal behaviour */
142 bcm_mpi_writel(0, MPI_L2PCFG_REG);
144 return PCIBIOS_SUCCESSFUL;
147 static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn,
148 int where, int size, u32 *val)
150 int type;
152 type = bus->parent ? 1 : 0;
154 if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
155 return PCIBIOS_DEVICE_NOT_FOUND;
157 return bcm63xx_do_cfg_read(type, bus->number, devfn,
158 where, size, val);
161 static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn,
162 int where, int size, u32 val)
164 int type;
166 type = bus->parent ? 1 : 0;
168 if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
169 return PCIBIOS_DEVICE_NOT_FOUND;
171 return bcm63xx_do_cfg_write(type, bus->number, devfn,
172 where, size, val);
175 struct pci_ops bcm63xx_pci_ops = {
176 .read = bcm63xx_pci_read,
177 .write = bcm63xx_pci_write
180 #ifdef CONFIG_CARDBUS
182 * emulate configuration read access on a cardbus bridge
184 #define FAKE_CB_BRIDGE_SLOT 0x1e
186 static int fake_cb_bridge_bus_number = -1;
188 static struct {
189 u16 pci_command;
190 u8 cb_latency;
191 u8 subordinate_busn;
192 u8 cardbus_busn;
193 u8 pci_busn;
194 int bus_assigned;
195 u16 bridge_control;
197 u32 mem_base0;
198 u32 mem_limit0;
199 u32 mem_base1;
200 u32 mem_limit1;
202 u32 io_base0;
203 u32 io_limit0;
204 u32 io_base1;
205 u32 io_limit1;
206 } fake_cb_bridge_regs;
208 static int fake_cb_bridge_read(int where, int size, u32 *val)
210 unsigned int reg;
211 u32 data;
213 data = 0;
214 reg = where >> 2;
215 switch (reg) {
216 case (PCI_VENDOR_ID >> 2):
217 case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2):
218 /* create dummy vendor/device id from our cpu id */
219 data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM;
220 break;
222 case (PCI_COMMAND >> 2):
223 data = (PCI_STATUS_DEVSEL_SLOW << 16);
224 data |= fake_cb_bridge_regs.pci_command;
225 break;
227 case (PCI_CLASS_REVISION >> 2):
228 data = (PCI_CLASS_BRIDGE_CARDBUS << 16);
229 break;
231 case (PCI_CACHE_LINE_SIZE >> 2):
232 data = (PCI_HEADER_TYPE_CARDBUS << 16);
233 break;
235 case (PCI_INTERRUPT_LINE >> 2):
236 /* bridge control */
237 data = (fake_cb_bridge_regs.bridge_control << 16);
238 /* pin:intA line:0xff */
239 data |= (0x1 << 8) | 0xff;
240 break;
242 case (PCI_CB_PRIMARY_BUS >> 2):
243 data = (fake_cb_bridge_regs.cb_latency << 24);
244 data |= (fake_cb_bridge_regs.subordinate_busn << 16);
245 data |= (fake_cb_bridge_regs.cardbus_busn << 8);
246 data |= fake_cb_bridge_regs.pci_busn;
247 break;
249 case (PCI_CB_MEMORY_BASE_0 >> 2):
250 data = fake_cb_bridge_regs.mem_base0;
251 break;
253 case (PCI_CB_MEMORY_LIMIT_0 >> 2):
254 data = fake_cb_bridge_regs.mem_limit0;
255 break;
257 case (PCI_CB_MEMORY_BASE_1 >> 2):
258 data = fake_cb_bridge_regs.mem_base1;
259 break;
261 case (PCI_CB_MEMORY_LIMIT_1 >> 2):
262 data = fake_cb_bridge_regs.mem_limit1;
263 break;
265 case (PCI_CB_IO_BASE_0 >> 2):
266 /* | 1 for 32bits io support */
267 data = fake_cb_bridge_regs.io_base0 | 0x1;
268 break;
270 case (PCI_CB_IO_LIMIT_0 >> 2):
271 data = fake_cb_bridge_regs.io_limit0;
272 break;
274 case (PCI_CB_IO_BASE_1 >> 2):
275 /* | 1 for 32bits io support */
276 data = fake_cb_bridge_regs.io_base1 | 0x1;
277 break;
279 case (PCI_CB_IO_LIMIT_1 >> 2):
280 data = fake_cb_bridge_regs.io_limit1;
281 break;
284 *val = postprocess_read(data, where, size);
285 return PCIBIOS_SUCCESSFUL;
289 * emulate configuration write access on a cardbus bridge
291 static int fake_cb_bridge_write(int where, int size, u32 val)
293 unsigned int reg;
294 u32 data, tmp;
295 int ret;
297 ret = fake_cb_bridge_read((where & ~0x3), 4, &data);
298 if (ret != PCIBIOS_SUCCESSFUL)
299 return ret;
301 data = preprocess_write(data, val, where, size);
303 reg = where >> 2;
304 switch (reg) {
305 case (PCI_COMMAND >> 2):
306 fake_cb_bridge_regs.pci_command = (data & 0xffff);
307 break;
309 case (PCI_CB_PRIMARY_BUS >> 2):
310 fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff;
311 fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff;
312 fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff;
313 fake_cb_bridge_regs.pci_busn = data & 0xff;
314 if (fake_cb_bridge_regs.cardbus_busn)
315 fake_cb_bridge_regs.bus_assigned = 1;
316 break;
318 case (PCI_INTERRUPT_LINE >> 2):
319 tmp = (data >> 16) & 0xffff;
320 /* disable memory prefetch support */
321 tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0;
322 tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1;
323 fake_cb_bridge_regs.bridge_control = tmp;
324 break;
326 case (PCI_CB_MEMORY_BASE_0 >> 2):
327 fake_cb_bridge_regs.mem_base0 = data;
328 break;
330 case (PCI_CB_MEMORY_LIMIT_0 >> 2):
331 fake_cb_bridge_regs.mem_limit0 = data;
332 break;
334 case (PCI_CB_MEMORY_BASE_1 >> 2):
335 fake_cb_bridge_regs.mem_base1 = data;
336 break;
338 case (PCI_CB_MEMORY_LIMIT_1 >> 2):
339 fake_cb_bridge_regs.mem_limit1 = data;
340 break;
342 case (PCI_CB_IO_BASE_0 >> 2):
343 fake_cb_bridge_regs.io_base0 = data;
344 break;
346 case (PCI_CB_IO_LIMIT_0 >> 2):
347 fake_cb_bridge_regs.io_limit0 = data;
348 break;
350 case (PCI_CB_IO_BASE_1 >> 2):
351 fake_cb_bridge_regs.io_base1 = data;
352 break;
354 case (PCI_CB_IO_LIMIT_1 >> 2):
355 fake_cb_bridge_regs.io_limit1 = data;
356 break;
359 return PCIBIOS_SUCCESSFUL;
362 static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn,
363 int where, int size, u32 *val)
365 /* snoop access to slot 0x1e on root bus, we fake a cardbus
366 * bridge at this location */
367 if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
368 fake_cb_bridge_bus_number = bus->number;
369 return fake_cb_bridge_read(where, size, val);
372 /* a configuration cycle for the device behind the cardbus
373 * bridge is actually done as a type 0 cycle on the primary
374 * bus. This means that only one device can be on the cardbus
375 * bus */
376 if (fake_cb_bridge_regs.bus_assigned &&
377 bus->number == fake_cb_bridge_regs.cardbus_busn &&
378 PCI_SLOT(devfn) == 0)
379 return bcm63xx_do_cfg_read(0, 0,
380 PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
381 where, size, val);
383 return PCIBIOS_DEVICE_NOT_FOUND;
386 static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn,
387 int where, int size, u32 val)
389 if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
390 fake_cb_bridge_bus_number = bus->number;
391 return fake_cb_bridge_write(where, size, val);
394 if (fake_cb_bridge_regs.bus_assigned &&
395 bus->number == fake_cb_bridge_regs.cardbus_busn &&
396 PCI_SLOT(devfn) == 0)
397 return bcm63xx_do_cfg_write(0, 0,
398 PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
399 where, size, val);
401 return PCIBIOS_DEVICE_NOT_FOUND;
404 struct pci_ops bcm63xx_cb_ops = {
405 .read = bcm63xx_cb_read,
406 .write = bcm63xx_cb_write,
410 * only one IO window, so it cannot be shared by PCI and cardbus, use
411 * fixup to choose and detect unhandled configuration
413 static void bcm63xx_fixup(struct pci_dev *dev)
415 static int io_window = -1;
416 int i, found, new_io_window;
417 u32 val;
419 /* look for any io resource */
420 found = 0;
421 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
422 if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
423 found = 1;
424 break;
428 if (!found)
429 return;
431 /* skip our fake bus with only cardbus bridge on it */
432 if (dev->bus->number == fake_cb_bridge_bus_number)
433 return;
435 /* find on which bus the device is */
436 if (fake_cb_bridge_regs.bus_assigned &&
437 dev->bus->number == fake_cb_bridge_regs.cardbus_busn &&
438 PCI_SLOT(dev->devfn) == 0)
439 new_io_window = 1;
440 else
441 new_io_window = 0;
443 if (new_io_window == io_window)
444 return;
446 if (io_window != -1) {
447 printk(KERN_ERR "bcm63xx: both PCI and cardbus devices "
448 "need IO, which hardware cannot do\n");
449 return;
452 printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n",
453 (new_io_window == 0) ? "PCI" : "cardbus");
455 val = bcm_mpi_readl(MPI_L2PIOREMAP_REG);
456 if (io_window)
457 val |= MPI_L2PREMAP_IS_CARDBUS_MASK;
458 else
459 val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK;
460 bcm_mpi_writel(val, MPI_L2PIOREMAP_REG);
462 io_window = new_io_window;
465 DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup);
466 #endif
468 static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn)
470 switch (bus->number) {
471 case PCIE_BUS_BRIDGE:
472 return PCI_SLOT(devfn) == 0;
473 case PCIE_BUS_DEVICE:
474 if (PCI_SLOT(devfn) == 0)
475 return bcm_pcie_readl(PCIE_DLSTATUS_REG)
476 & DLSTATUS_PHYLINKUP;
477 default:
478 return false;
482 static int bcm63xx_pcie_read(struct pci_bus *bus, unsigned int devfn,
483 int where, int size, u32 *val)
485 u32 data;
486 u32 reg = where & ~3;
488 if (!bcm63xx_pcie_can_access(bus, devfn))
489 return PCIBIOS_DEVICE_NOT_FOUND;
491 if (bus->number == PCIE_BUS_DEVICE)
492 reg += PCIE_DEVICE_OFFSET;
494 data = bcm_pcie_readl(reg);
496 *val = postprocess_read(data, where, size);
498 return PCIBIOS_SUCCESSFUL;
502 static int bcm63xx_pcie_write(struct pci_bus *bus, unsigned int devfn,
503 int where, int size, u32 val)
505 u32 data;
506 u32 reg = where & ~3;
508 if (!bcm63xx_pcie_can_access(bus, devfn))
509 return PCIBIOS_DEVICE_NOT_FOUND;
511 if (bus->number == PCIE_BUS_DEVICE)
512 reg += PCIE_DEVICE_OFFSET;
515 data = bcm_pcie_readl(reg);
517 data = preprocess_write(data, val, where, size);
518 bcm_pcie_writel(data, reg);
520 return PCIBIOS_SUCCESSFUL;
524 struct pci_ops bcm63xx_pcie_ops = {
525 .read = bcm63xx_pcie_read,
526 .write = bcm63xx_pcie_write