?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
hyperv: Remove recv_pkt_list and lock
[linux/fpc-iii.git] / drivers / scsi / dc395x.c
blob83d9bf6fa6ca9989717e0fd9f4ae20b9b8d7e724
1 /*
2 * dc395x.c
3 *
4 * Device Driver for Tekram DC395(U/UW/F), DC315(U)
5 * PCI SCSI Bus Master Host Adapter
6 * (SCSI chip set used Tekram ASIC TRM-S1040)
7 *
8 * Authors:
9 * C.L. Huang <ching@tekram.com.tw>
10 * Erich Chen <erich@tekram.com.tw>
11 * (C) Copyright 1995-1999 Tekram Technology Co., Ltd.
12 *
13 * Kurt Garloff <garloff@suse.de>
14 * (C) 1999-2000 Kurt Garloff
15 *
16 * Oliver Neukum <oliver@neukum.name>
17 * Ali Akcaagac <aliakc@web.de>
18 * Jamie Lenehan <lenehan@twibble.org>
19 * (C) 2003
20 *
21 * License: GNU GPL
22 *
23 *************************************************************************
24 *
25 * Redistribution and use in source and binary forms, with or without
26 * modification, are permitted provided that the following conditions
27 * are met:
28 * 1. Redistributions of source code must retain the above copyright
29 * notice, this list of conditions and the following disclaimer.
30 * 2. Redistributions in binary form must reproduce the above copyright
31 * notice, this list of conditions and the following disclaimer in the
32 * documentation and/or other materials provided with the distribution.
33 * 3. The name of the author may not be used to endorse or promote products
34 * derived from this software without specific prior written permission.
35 *
36 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
37 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
38 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
39 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
40 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
41 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
42 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
43 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
44 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
45 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
46 *
47 ************************************************************************
48 */
49 #include <linux/module.h>
50 #include <linux/moduleparam.h>
51 #include <linux/delay.h>
52 #include <linux/ctype.h>
53 #include <linux/blkdev.h>
54 #include <linux/interrupt.h>
55 #include <linux/init.h>
56 #include <linux/spinlock.h>
57 #include <linux/pci.h>
58 #include <linux/list.h>
59 #include <linux/vmalloc.h>
60 #include <linux/slab.h>
61 #include <asm/io.h>
62
63 #include <scsi/scsi.h>
64 #include <scsi/scsicam.h> /* needed for scsicam_bios_param */
65 #include <scsi/scsi_cmnd.h>
66 #include <scsi/scsi_device.h>
67 #include <scsi/scsi_host.h>
68
69 #include "dc395x.h"
70
71 #define DC395X_NAME "dc395x"
72 #define DC395X_BANNER "Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040"
73 #define DC395X_VERSION "v2.05, 2004/03/08"
74
75 /*---------------------------------------------------------------------------
76 Features
77 ---------------------------------------------------------------------------*/
78 /*
79 * Set to disable parts of the driver
80 */
81 /*#define DC395x_NO_DISCONNECT*/
82 /*#define DC395x_NO_TAGQ*/
83 /*#define DC395x_NO_SYNC*/
84 /*#define DC395x_NO_WIDE*/
85
86 /*---------------------------------------------------------------------------
87 Debugging
88 ---------------------------------------------------------------------------*/
89 /*
90 * Types of debugging that can be enabled and disabled
91 */
92 #define DBG_KG 0x0001
93 #define DBG_0 0x0002
94 #define DBG_1 0x0004
95 #define DBG_SG 0x0020
96 #define DBG_FIFO 0x0040
97 #define DBG_PIO 0x0080
98
99
100 /*
101 * Set set of things to output debugging for.
102 * Undefine to remove all debugging
103 */
104 /*#define DEBUG_MASK (DBG_0|DBG_1|DBG_SG|DBG_FIFO|DBG_PIO)*/
105 /*#define DEBUG_MASK DBG_0*/
106
107
108 /*
109 * Output a kernel mesage at the specified level and append the
110 * driver name and a ": " to the start of the message
111 */
112 #define dprintkl(level, format, arg...) \
113 printk(level DC395X_NAME ": " format , ## arg)
114
115
116 #ifdef DEBUG_MASK
117 /*
118 * print a debug message - this is formated with KERN_DEBUG, then the
119 * driver name followed by a ": " and then the message is output.
120 * This also checks that the specified debug level is enabled before
121 * outputing the message
122 */
123 #define dprintkdbg(type, format, arg...) \
124 do { \
125 if ((type) & (DEBUG_MASK)) \
126 dprintkl(KERN_DEBUG , format , ## arg); \
127 } while (0)
128
129 /*
130 * Check if the specified type of debugging is enabled
131 */
132 #define debug_enabled(type) ((DEBUG_MASK) & (type))
133
134 #else
135 /*
136 * No debugging. Do nothing
137 */
138 #define dprintkdbg(type, format, arg...) \
139 do {} while (0)
140 #define debug_enabled(type) (0)
141
142 #endif
143
144
145 #ifndef PCI_VENDOR_ID_TEKRAM
146 #define PCI_VENDOR_ID_TEKRAM 0x1DE1 /* Vendor ID */
147 #endif
148 #ifndef PCI_DEVICE_ID_TEKRAM_TRMS1040
149 #define PCI_DEVICE_ID_TEKRAM_TRMS1040 0x0391 /* Device ID */
150 #endif
151
152
153 #define DC395x_LOCK_IO(dev,flags) spin_lock_irqsave(((struct Scsi_Host *)dev)->host_lock, flags)
154 #define DC395x_UNLOCK_IO(dev,flags) spin_unlock_irqrestore(((struct Scsi_Host *)dev)->host_lock, flags)
155
156 #define DC395x_read8(acb,address) (u8)(inb(acb->io_port_base + (address)))
157 #define DC395x_read16(acb,address) (u16)(inw(acb->io_port_base + (address)))
158 #define DC395x_read32(acb,address) (u32)(inl(acb->io_port_base + (address)))
159 #define DC395x_write8(acb,address,value) outb((value), acb->io_port_base + (address))
160 #define DC395x_write16(acb,address,value) outw((value), acb->io_port_base + (address))
161 #define DC395x_write32(acb,address,value) outl((value), acb->io_port_base + (address))
162
163 /* cmd->result */
164 #define RES_TARGET 0x000000FF /* Target State */
165 #define RES_TARGET_LNX STATUS_MASK /* Only official ... */
166 #define RES_ENDMSG 0x0000FF00 /* End Message */
167 #define RES_DID 0x00FF0000 /* DID_ codes */
168 #define RES_DRV 0xFF000000 /* DRIVER_ codes */
169
170 #define MK_RES(drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt))
171 #define MK_RES_LNX(drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt)<<1)
172
173 #define SET_RES_TARGET(who,tgt) { who &= ~RES_TARGET; who |= (int)(tgt); }
174 #define SET_RES_TARGET_LNX(who,tgt) { who &= ~RES_TARGET_LNX; who |= (int)(tgt) << 1; }
175 #define SET_RES_MSG(who,msg) { who &= ~RES_ENDMSG; who |= (int)(msg) << 8; }
176 #define SET_RES_DID(who,did) { who &= ~RES_DID; who |= (int)(did) << 16; }
177 #define SET_RES_DRV(who,drv) { who &= ~RES_DRV; who |= (int)(drv) << 24; }
178
179 #define TAG_NONE 255
180
181 /*
182 * srb->segement_x is the hw sg list. It is always allocated as a
183 * DC395x_MAX_SG_LISTENTRY entries in a linear block which does not
184 * cross a page boundy.
185 */
186 #define SEGMENTX_LEN (sizeof(struct SGentry)*DC395x_MAX_SG_LISTENTRY)
187
188
189 struct SGentry {
190 u32 address; /* bus! address */
191 u32 length;
192 };
193
194 /* The SEEPROM structure for TRM_S1040 */
195 struct NVRamTarget {
196 u8 cfg0; /* Target configuration byte 0 */
197 u8 period; /* Target period */
198 u8 cfg2; /* Target configuration byte 2 */
199 u8 cfg3; /* Target configuration byte 3 */
200 };
201
202 struct NvRamType {
203 u8 sub_vendor_id[2]; /* 0,1 Sub Vendor ID */
204 u8 sub_sys_id[2]; /* 2,3 Sub System ID */
205 u8 sub_class; /* 4 Sub Class */
206 u8 vendor_id[2]; /* 5,6 Vendor ID */
207 u8 device_id[2]; /* 7,8 Device ID */
208 u8 reserved; /* 9 Reserved */
209 struct NVRamTarget target[DC395x_MAX_SCSI_ID];
210 /** 10,11,12,13
211 ** 14,15,16,17
212 ** ....
213 ** ....
214 ** 70,71,72,73
215 */
216 u8 scsi_id; /* 74 Host Adapter SCSI ID */
217 u8 channel_cfg; /* 75 Channel configuration */
218 u8 delay_time; /* 76 Power on delay time */
219 u8 max_tag; /* 77 Maximum tags */
220 u8 reserved0; /* 78 */
221 u8 boot_target; /* 79 */
222 u8 boot_lun; /* 80 */
223 u8 reserved1; /* 81 */
224 u16 reserved2[22]; /* 82,..125 */
225 u16 cksum; /* 126,127 */
226 };
227
228 struct ScsiReqBlk {
229 struct list_head list; /* next/prev ptrs for srb lists */
230 struct DeviceCtlBlk *dcb;
231 struct scsi_cmnd *cmd;
232
233 struct SGentry *segment_x; /* Linear array of hw sg entries (up to 64 entries) */
234 dma_addr_t sg_bus_addr; /* Bus address of sg list (ie, of segment_x) */
235
236 u8 sg_count; /* No of HW sg entries for this request */
237 u8 sg_index; /* Index of HW sg entry for this request */
238 size_t total_xfer_length; /* Total number of bytes remaining to be transferred */
239 size_t request_length; /* Total number of bytes in this request */
240 /*
241 * The sense buffer handling function, request_sense, uses
242 * the first hw sg entry (segment_x[0]) and the transfer
243 * length (total_xfer_length). While doing this it stores the
244 * original values into the last sg hw list
245 * (srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1] and the
246 * total_xfer_length in xferred. These values are restored in
247 * pci_unmap_srb_sense. This is the only place xferred is used.
248 */
249 size_t xferred; /* Saved copy of total_xfer_length */
250
251 u16 state;
252
253 u8 msgin_buf[6];
254 u8 msgout_buf[6];
255
256 u8 adapter_status;
257 u8 target_status;
258 u8 msg_count;
259 u8 end_message;
260
261 u8 tag_number;
262 u8 status;
263 u8 retry_count;
264 u8 flag;
265
266 u8 scsi_phase;
267 };
268
269 struct DeviceCtlBlk {
270 struct list_head list; /* next/prev ptrs for the dcb list */
271 struct AdapterCtlBlk *acb;
272 struct list_head srb_going_list; /* head of going srb list */
273 struct list_head srb_waiting_list; /* head of waiting srb list */
274
275 struct ScsiReqBlk *active_srb;
276 u32 tag_mask;
277
278 u16 max_command;
279
280 u8 target_id; /* SCSI Target ID (SCSI Only) */
281 u8 target_lun; /* SCSI Log. Unit (SCSI Only) */
282 u8 identify_msg;
283 u8 dev_mode;
284
285 u8 inquiry7; /* To store Inquiry flags */
286 u8 sync_mode; /* 0:async mode */
287 u8 min_nego_period; /* for nego. */
288 u8 sync_period; /* for reg. */
289
290 u8 sync_offset; /* for reg. and nego.(low nibble) */
291 u8 flag;
292 u8 dev_type;
293 u8 init_tcq_flag;
294 };
295
296 struct AdapterCtlBlk {
297 struct Scsi_Host *scsi_host;
298
299 unsigned long io_port_base;
300 unsigned long io_port_len;
301
302 struct list_head dcb_list; /* head of going dcb list */
303 struct DeviceCtlBlk *dcb_run_robin;
304 struct DeviceCtlBlk *active_dcb;
305
306 struct list_head srb_free_list; /* head of free srb list */
307 struct ScsiReqBlk *tmp_srb;
308 struct timer_list waiting_timer;
309 struct timer_list selto_timer;
310
311 unsigned long last_reset;
312
313 u16 srb_count;
314
315 u8 sel_timeout;
316
317 unsigned int irq_level;
318 u8 tag_max_num;
319 u8 acb_flag;
320 u8 gmode2;
321
322 u8 config;
323 u8 lun_chk;
324 u8 scan_devices;
325 u8 hostid_bit;
326
327 u8 dcb_map[DC395x_MAX_SCSI_ID];
328 struct DeviceCtlBlk *children[DC395x_MAX_SCSI_ID][32];
329
330 struct pci_dev *dev;
331
332 u8 msg_len;
333
334 struct ScsiReqBlk srb_array[DC395x_MAX_SRB_CNT];
335 struct ScsiReqBlk srb;
336
337 struct NvRamType eeprom; /* eeprom settings for this adapter */
338 };
339
340
341 /*---------------------------------------------------------------------------
342 Forward declarations
343 ---------------------------------------------------------------------------*/
344 static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
345 u16 *pscsi_status);
346 static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
347 u16 *pscsi_status);
348 static void command_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
349 u16 *pscsi_status);
350 static void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
351 u16 *pscsi_status);
352 static void msgout_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
353 u16 *pscsi_status);
354 static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
355 u16 *pscsi_status);
356 static void data_out_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
357 u16 *pscsi_status);
358 static void data_in_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
359 u16 *pscsi_status);
360 static void command_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
361 u16 *pscsi_status);
362 static void status_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
363 u16 *pscsi_status);
364 static void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
365 u16 *pscsi_status);
366 static void msgin_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
367 u16 *pscsi_status);
368 static void nop0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
369 u16 *pscsi_status);
370 static void nop1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
371 u16 *pscsi_status);
372 static void set_basic_config(struct AdapterCtlBlk *acb);
373 static void cleanup_after_transfer(struct AdapterCtlBlk *acb,
374 struct ScsiReqBlk *srb);
375 static void reset_scsi_bus(struct AdapterCtlBlk *acb);
376 static void data_io_transfer(struct AdapterCtlBlk *acb,
377 struct ScsiReqBlk *srb, u16 io_dir);
378 static void disconnect(struct AdapterCtlBlk *acb);
379 static void reselect(struct AdapterCtlBlk *acb);
380 static u8 start_scsi(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
381 struct ScsiReqBlk *srb);
382 static inline void enable_msgout_abort(struct AdapterCtlBlk *acb,
383 struct ScsiReqBlk *srb);
384 static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
385 struct ScsiReqBlk *srb);
386 static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_code,
387 struct scsi_cmnd *cmd, u8 force);
388 static void scsi_reset_detect(struct AdapterCtlBlk *acb);
389 static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb);
390 static void pci_unmap_srb_sense(struct AdapterCtlBlk *acb,
391 struct ScsiReqBlk *srb);
392 static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
393 struct ScsiReqBlk *srb);
394 static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
395 struct ScsiReqBlk *srb);
396 static void set_xfer_rate(struct AdapterCtlBlk *acb,
397 struct DeviceCtlBlk *dcb);
398 static void waiting_timeout(unsigned long ptr);
399
400
401 /*---------------------------------------------------------------------------
402 Static Data
403 ---------------------------------------------------------------------------*/
404 static u16 current_sync_offset = 0;
405
406 static void *dc395x_scsi_phase0[] = {
407 data_out_phase0,/* phase:0 */
408 data_in_phase0, /* phase:1 */
409 command_phase0, /* phase:2 */
410 status_phase0, /* phase:3 */
411 nop0, /* phase:4 PH_BUS_FREE .. initial phase */
412 nop0, /* phase:5 PH_BUS_FREE .. initial phase */
413 msgout_phase0, /* phase:6 */
414 msgin_phase0, /* phase:7 */
415 };
416
417 static void *dc395x_scsi_phase1[] = {
418 data_out_phase1,/* phase:0 */
419 data_in_phase1, /* phase:1 */
420 command_phase1, /* phase:2 */
421 status_phase1, /* phase:3 */
422 nop1, /* phase:4 PH_BUS_FREE .. initial phase */
423 nop1, /* phase:5 PH_BUS_FREE .. initial phase */
424 msgout_phase1, /* phase:6 */
425 msgin_phase1, /* phase:7 */
426 };
427
428 /*
429 *Fast20: 000 50ns, 20.0 MHz
430 * 001 75ns, 13.3 MHz
431 * 010 100ns, 10.0 MHz
432 * 011 125ns, 8.0 MHz
433 * 100 150ns, 6.6 MHz
434 * 101 175ns, 5.7 MHz
435 * 110 200ns, 5.0 MHz
436 * 111 250ns, 4.0 MHz
437 *
438 *Fast40(LVDS): 000 25ns, 40.0 MHz
439 * 001 50ns, 20.0 MHz
440 * 010 75ns, 13.3 MHz
441 * 011 100ns, 10.0 MHz
442 * 100 125ns, 8.0 MHz
443 * 101 150ns, 6.6 MHz
444 * 110 175ns, 5.7 MHz
445 * 111 200ns, 5.0 MHz
446 */
447 /*static u8 clock_period[] = {12,19,25,31,37,44,50,62};*/
448
449 /* real period:48ns,76ns,100ns,124ns,148ns,176ns,200ns,248ns */
450 static u8 clock_period[] = { 12, 18, 25, 31, 37, 43, 50, 62 };
451 static u16 clock_speed[] = { 200, 133, 100, 80, 67, 58, 50, 40 };
452
453
454 /*---------------------------------------------------------------------------
455 Configuration
456 ---------------------------------------------------------------------------*/
457 /*
458 * Module/boot parameters currently effect *all* instances of the
459 * card in the system.
460 */
461
462 /*
463 * Command line parameters are stored in a structure below.
464 * These are the index's into the structure for the various
465 * command line options.
466 */
467 #define CFG_ADAPTER_ID 0
468 #define CFG_MAX_SPEED 1
469 #define CFG_DEV_MODE 2
470 #define CFG_ADAPTER_MODE 3
471 #define CFG_TAGS 4
472 #define CFG_RESET_DELAY 5
473
474 #define CFG_NUM 6 /* number of configuration items */
475
476
477 /*
478 * Value used to indicate that a command line override
479 * hasn't been used to modify the value.
480 */
481 #define CFG_PARAM_UNSET -1
482
483
484 /*
485 * Hold command line parameters.
486 */
487 struct ParameterData {
488 int value; /* value of this setting */
489 int min; /* minimum value */
490 int max; /* maximum value */
491 int def; /* default value */
492 int safe; /* safe value */
493 };
494 static struct ParameterData cfg_data[] = {
495 { /* adapter id */
496 CFG_PARAM_UNSET,
497 0,
498 15,
499 7,
500 7
501 },
502 { /* max speed */
503 CFG_PARAM_UNSET,
504 0,
505 7,
506 1, /* 13.3Mhz */
507 4, /* 6.7Hmz */
508 },
509 { /* dev mode */
510 CFG_PARAM_UNSET,
511 0,
512 0x3f,
513 NTC_DO_PARITY_CHK | NTC_DO_DISCONNECT | NTC_DO_SYNC_NEGO |
514 NTC_DO_WIDE_NEGO | NTC_DO_TAG_QUEUEING |
515 NTC_DO_SEND_START,
516 NTC_DO_PARITY_CHK | NTC_DO_SEND_START
517 },
518 { /* adapter mode */
519 CFG_PARAM_UNSET,
520 0,
521 0x2f,
522 #ifdef CONFIG_SCSI_MULTI_LUN
523 NAC_SCANLUN |
524 #endif
525 NAC_GT2DRIVES | NAC_GREATER_1G | NAC_POWERON_SCSI_RESET
526 /*| NAC_ACTIVE_NEG*/,
527 NAC_GT2DRIVES | NAC_GREATER_1G | NAC_POWERON_SCSI_RESET | 0x08
528 },
529 { /* tags */
530 CFG_PARAM_UNSET,
531 0,
532 5,
533 3, /* 16 tags (??) */
534 2,
535 },
536 { /* reset delay */
537 CFG_PARAM_UNSET,
538 0,
539 180,
540 1, /* 1 second */
541 10, /* 10 seconds */
542 }
543 };
544
545
546 /*
547 * Safe settings. If set to zero the BIOS/default values with
548 * command line overrides will be used. If set to 1 then safe and
549 * slow settings will be used.
550 */
551 static bool use_safe_settings = 0;
552 module_param_named(safe, use_safe_settings, bool, 0);
553 MODULE_PARM_DESC(safe, "Use safe and slow settings only. Default: false");
554
555
556 module_param_named(adapter_id, cfg_data[CFG_ADAPTER_ID].value, int, 0);
557 MODULE_PARM_DESC(adapter_id, "Adapter SCSI ID. Default 7 (0-15)");
558
559 module_param_named(max_speed, cfg_data[CFG_MAX_SPEED].value, int, 0);
560 MODULE_PARM_DESC(max_speed, "Maximum bus speed. Default 1 (0-7) Speeds: 0=20, 1=13.3, 2=10, 3=8, 4=6.7, 5=5.8, 6=5, 7=4 Mhz");
561
562 module_param_named(dev_mode, cfg_data[CFG_DEV_MODE].value, int, 0);
563 MODULE_PARM_DESC(dev_mode, "Device mode.");
564
565 module_param_named(adapter_mode, cfg_data[CFG_ADAPTER_MODE].value, int, 0);
566 MODULE_PARM_DESC(adapter_mode, "Adapter mode.");
567
568 module_param_named(tags, cfg_data[CFG_TAGS].value, int, 0);
569 MODULE_PARM_DESC(tags, "Number of tags (1<<x). Default 3 (0-5)");
570
571 module_param_named(reset_delay, cfg_data[CFG_RESET_DELAY].value, int, 0);
572 MODULE_PARM_DESC(reset_delay, "Reset delay in seconds. Default 1 (0-180)");
573
574
575 /**
576 * set_safe_settings - if the use_safe_settings option is set then
577 * set all values to the safe and slow values.
578 **/
579 static void set_safe_settings(void)
580 {
581 if (use_safe_settings)
582 {
583 int i;
584
585 dprintkl(KERN_INFO, "Using safe settings.\n");
586 for (i = 0; i < CFG_NUM; i++)
587 {
588 cfg_data[i].value = cfg_data[i].safe;
589 }
590 }
591 }
592
593
594 /**
595 * fix_settings - reset any boot parameters which are out of range
596 * back to the default values.
597 **/
598 static void fix_settings(void)
599 {
600 int i;
601
602 dprintkdbg(DBG_1,
603 "setup: AdapterId=%08x MaxSpeed=%08x DevMode=%08x "
604 "AdapterMode=%08x Tags=%08x ResetDelay=%08x\n",
605 cfg_data[CFG_ADAPTER_ID].value,
606 cfg_data[CFG_MAX_SPEED].value,
607 cfg_data[CFG_DEV_MODE].value,
608 cfg_data[CFG_ADAPTER_MODE].value,
609 cfg_data[CFG_TAGS].value,
610 cfg_data[CFG_RESET_DELAY].value);
611 for (i = 0; i < CFG_NUM; i++)
612 {
613 if (cfg_data[i].value < cfg_data[i].min
614 || cfg_data[i].value > cfg_data[i].max)
615 cfg_data[i].value = cfg_data[i].def;
616 }
617 }
618
619
620
621 /*
622 * Mapping from the eeprom delay index value (index into this array)
623 * to the number of actual seconds that the delay should be for.
624 */
625 static char eeprom_index_to_delay_map[] =
626 { 1, 3, 5, 10, 16, 30, 60, 120 };
627
628
629 /**
630 * eeprom_index_to_delay - Take the eeprom delay setting and convert it
631 * into a number of seconds.
632 *
633 * @eeprom: The eeprom structure in which we find the delay index to map.
634 **/
635 static void eeprom_index_to_delay(struct NvRamType *eeprom)
636 {
637 eeprom->delay_time = eeprom_index_to_delay_map[eeprom->delay_time];
638 }
639
640
641 /**
642 * delay_to_eeprom_index - Take a delay in seconds and return the
643 * closest eeprom index which will delay for at least that amount of
644 * seconds.
645 *
646 * @delay: The delay, in seconds, to find the eeprom index for.
647 **/
648 static int delay_to_eeprom_index(int delay)
649 {
650 u8 idx = 0;
651 while (idx < 7 && eeprom_index_to_delay_map[idx] < delay)
652 idx++;
653 return idx;
654 }
655
656
657 /**
658 * eeprom_override - Override the eeprom settings, in the provided
659 * eeprom structure, with values that have been set on the command
660 * line.
661 *
662 * @eeprom: The eeprom data to override with command line options.
663 **/
664 static void eeprom_override(struct NvRamType *eeprom)
665 {
666 u8 id;
667
668 /* Adapter Settings */
669 if (cfg_data[CFG_ADAPTER_ID].value != CFG_PARAM_UNSET)
670 eeprom->scsi_id = (u8)cfg_data[CFG_ADAPTER_ID].value;
671
672 if (cfg_data[CFG_ADAPTER_MODE].value != CFG_PARAM_UNSET)
673 eeprom->channel_cfg = (u8)cfg_data[CFG_ADAPTER_MODE].value;
674
675 if (cfg_data[CFG_RESET_DELAY].value != CFG_PARAM_UNSET)
676 eeprom->delay_time = delay_to_eeprom_index(
677 cfg_data[CFG_RESET_DELAY].value);
678
679 if (cfg_data[CFG_TAGS].value != CFG_PARAM_UNSET)
680 eeprom->max_tag = (u8)cfg_data[CFG_TAGS].value;
681
682 /* Device Settings */
683 for (id = 0; id < DC395x_MAX_SCSI_ID; id++) {
684 if (cfg_data[CFG_DEV_MODE].value != CFG_PARAM_UNSET)
685 eeprom->target[id].cfg0 =
686 (u8)cfg_data[CFG_DEV_MODE].value;
687
688 if (cfg_data[CFG_MAX_SPEED].value != CFG_PARAM_UNSET)
689 eeprom->target[id].period =
690 (u8)cfg_data[CFG_MAX_SPEED].value;
691
692 }
693 }
694
695
696 /*---------------------------------------------------------------------------
697 ---------------------------------------------------------------------------*/
698
699 static unsigned int list_size(struct list_head *head)
700 {
701 unsigned int count = 0;
702 struct list_head *pos;
703 list_for_each(pos, head)
704 count++;
705 return count;
706 }
707
708
709 static struct DeviceCtlBlk *dcb_get_next(struct list_head *head,
710 struct DeviceCtlBlk *pos)
711 {
712 int use_next = 0;
713 struct DeviceCtlBlk* next = NULL;
714 struct DeviceCtlBlk* i;
715
716 if (list_empty(head))
717 return NULL;
718
719 /* find supplied dcb and then select the next one */
720 list_for_each_entry(i, head, list)
721 if (use_next) {
722 next = i;
723 break;
724 } else if (i == pos) {
725 use_next = 1;
726 }
727 /* if no next one take the head one (ie, wraparound) */
728 if (!next)
729 list_for_each_entry(i, head, list) {
730 next = i;
731 break;
732 }
733
734 return next;
735 }
736
737
738 static void free_tag(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
739 {
740 if (srb->tag_number < 255) {
741 dcb->tag_mask &= ~(1 << srb->tag_number); /* free tag mask */
742 srb->tag_number = 255;
743 }
744 }
745
746
747 /* Find cmd in SRB list */
748 static inline struct ScsiReqBlk *find_cmd(struct scsi_cmnd *cmd,
749 struct list_head *head)
750 {
751 struct ScsiReqBlk *i;
752 list_for_each_entry(i, head, list)
753 if (i->cmd == cmd)
754 return i;
755 return NULL;
756 }
757
758
759 static struct ScsiReqBlk *srb_get_free(struct AdapterCtlBlk *acb)
760 {
761 struct list_head *head = &acb->srb_free_list;
762 struct ScsiReqBlk *srb = NULL;
763
764 if (!list_empty(head)) {
765 srb = list_entry(head->next, struct ScsiReqBlk, list);
766 list_del(head->next);
767 dprintkdbg(DBG_0, "srb_get_free: srb=%p\n", srb);
768 }
769 return srb;
770 }
771
772
773 static void srb_free_insert(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
774 {
775 dprintkdbg(DBG_0, "srb_free_insert: srb=%p\n", srb);
776 list_add_tail(&srb->list, &acb->srb_free_list);
777 }
778
779
780 static void srb_waiting_insert(struct DeviceCtlBlk *dcb,
781 struct ScsiReqBlk *srb)
782 {
783 dprintkdbg(DBG_0, "srb_waiting_insert: (0x%p) <%02i-%i> srb=%p\n",
784 srb->cmd, dcb->target_id, dcb->target_lun, srb);
785 list_add(&srb->list, &dcb->srb_waiting_list);
786 }
787
788
789 static void srb_waiting_append(struct DeviceCtlBlk *dcb,
790 struct ScsiReqBlk *srb)
791 {
792 dprintkdbg(DBG_0, "srb_waiting_append: (0x%p) <%02i-%i> srb=%p\n",
793 srb->cmd, dcb->target_id, dcb->target_lun, srb);
794 list_add_tail(&srb->list, &dcb->srb_waiting_list);
795 }
796
797
798 static void srb_going_append(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
799 {
800 dprintkdbg(DBG_0, "srb_going_append: (0x%p) <%02i-%i> srb=%p\n",
801 srb->cmd, dcb->target_id, dcb->target_lun, srb);
802 list_add_tail(&srb->list, &dcb->srb_going_list);
803 }
804
805
806 static void srb_going_remove(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
807 {
808 struct ScsiReqBlk *i;
809 struct ScsiReqBlk *tmp;
810 dprintkdbg(DBG_0, "srb_going_remove: (0x%p) <%02i-%i> srb=%p\n",
811 srb->cmd, dcb->target_id, dcb->target_lun, srb);
812
813 list_for_each_entry_safe(i, tmp, &dcb->srb_going_list, list)
814 if (i == srb) {
815 list_del(&srb->list);
816 break;
817 }
818 }
819
820
821 static void srb_waiting_remove(struct DeviceCtlBlk *dcb,
822 struct ScsiReqBlk *srb)
823 {
824 struct ScsiReqBlk *i;
825 struct ScsiReqBlk *tmp;
826 dprintkdbg(DBG_0, "srb_waiting_remove: (0x%p) <%02i-%i> srb=%p\n",
827 srb->cmd, dcb->target_id, dcb->target_lun, srb);
828
829 list_for_each_entry_safe(i, tmp, &dcb->srb_waiting_list, list)
830 if (i == srb) {
831 list_del(&srb->list);
832 break;
833 }
834 }
835
836
837 static void srb_going_to_waiting_move(struct DeviceCtlBlk *dcb,
838 struct ScsiReqBlk *srb)
839 {
840 dprintkdbg(DBG_0,
841 "srb_going_to_waiting_move: (0x%p) <%02i-%i> srb=%p\n",
842 srb->cmd, dcb->target_id, dcb->target_lun, srb);
843 list_move(&srb->list, &dcb->srb_waiting_list);
844 }
845
846
847 static void srb_waiting_to_going_move(struct DeviceCtlBlk *dcb,
848 struct ScsiReqBlk *srb)
849 {
850 dprintkdbg(DBG_0,
851 "srb_waiting_to_going_move: (0x%p) <%02i-%i> srb=%p\n",
852 srb->cmd, dcb->target_id, dcb->target_lun, srb);
853 list_move(&srb->list, &dcb->srb_going_list);
854 }
855
856
857 /* Sets the timer to wake us up */
858 static void waiting_set_timer(struct AdapterCtlBlk *acb, unsigned long to)
859 {
860 if (timer_pending(&acb->waiting_timer))
861 return;
862 init_timer(&acb->waiting_timer);
863 acb->waiting_timer.function = waiting_timeout;
864 acb->waiting_timer.data = (unsigned long) acb;
865 if (time_before(jiffies + to, acb->last_reset - HZ / 2))
866 acb->waiting_timer.expires =
867 acb->last_reset - HZ / 2 + 1;
868 else
869 acb->waiting_timer.expires = jiffies + to + 1;
870 add_timer(&acb->waiting_timer);
871 }
872
873
874 /* Send the next command from the waiting list to the bus */
875 static void waiting_process_next(struct AdapterCtlBlk *acb)
876 {
877 struct DeviceCtlBlk *start = NULL;
878 struct DeviceCtlBlk *pos;
879 struct DeviceCtlBlk *dcb;
880 struct ScsiReqBlk *srb;
881 struct list_head *dcb_list_head = &acb->dcb_list;
882
883 if (acb->active_dcb
884 || (acb->acb_flag & (RESET_DETECT + RESET_DONE + RESET_DEV)))
885 return;
886
887 if (timer_pending(&acb->waiting_timer))
888 del_timer(&acb->waiting_timer);
889
890 if (list_empty(dcb_list_head))
891 return;
892
893 /*
894 * Find the starting dcb. Need to find it again in the list
895 * since the list may have changed since we set the ptr to it
896 */
897 list_for_each_entry(dcb, dcb_list_head, list)
898 if (dcb == acb->dcb_run_robin) {
899 start = dcb;
900 break;
901 }
902 if (!start) {
903 /* This can happen! */
904 start = list_entry(dcb_list_head->next, typeof(*start), list);
905 acb->dcb_run_robin = start;
906 }
907
908
909 /*
910 * Loop over the dcb, but we start somewhere (potentially) in
911 * the middle of the loop so we need to manully do this.
912 */
913 pos = start;
914 do {
915 struct list_head *waiting_list_head = &pos->srb_waiting_list;
916
917 /* Make sure, the next another device gets scheduled ... */
918 acb->dcb_run_robin = dcb_get_next(dcb_list_head,
919 acb->dcb_run_robin);
920
921 if (list_empty(waiting_list_head) ||
922 pos->max_command <= list_size(&pos->srb_going_list)) {
923 /* move to next dcb */
924 pos = dcb_get_next(dcb_list_head, pos);
925 } else {
926 srb = list_entry(waiting_list_head->next,
927 struct ScsiReqBlk, list);
928
929 /* Try to send to the bus */
930 if (!start_scsi(acb, pos, srb))
931 srb_waiting_to_going_move(pos, srb);
932 else
933 waiting_set_timer(acb, HZ/50);
934 break;
935 }
936 } while (pos != start);
937 }
938
939
940 /* Wake up waiting queue */
941 static void waiting_timeout(unsigned long ptr)
942 {
943 unsigned long flags;
944 struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)ptr;
945 dprintkdbg(DBG_1,
946 "waiting_timeout: Queue woken up by timer. acb=%p\n", acb);
947 DC395x_LOCK_IO(acb->scsi_host, flags);
948 waiting_process_next(acb);
949 DC395x_UNLOCK_IO(acb->scsi_host, flags);
950 }
951
952
953 /* Get the DCB for a given ID/LUN combination */
954 static struct DeviceCtlBlk *find_dcb(struct AdapterCtlBlk *acb, u8 id, u8 lun)
955 {
956 return acb->children[id][lun];
957 }
958
959
960 /* Send SCSI Request Block (srb) to adapter (acb) */
961 static void send_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
962 {
963 struct DeviceCtlBlk *dcb = srb->dcb;
964
965 if (dcb->max_command <= list_size(&dcb->srb_going_list) ||
966 acb->active_dcb ||
967 (acb->acb_flag & (RESET_DETECT + RESET_DONE + RESET_DEV))) {
968 srb_waiting_append(dcb, srb);
969 waiting_process_next(acb);
970 return;
971 }
972
973 if (!start_scsi(acb, dcb, srb))
974 srb_going_append(dcb, srb);
975 else {
976 srb_waiting_insert(dcb, srb);
977 waiting_set_timer(acb, HZ / 50);
978 }
979 }
980
981 /* Prepare SRB for being sent to Device DCB w/ command *cmd */
982 static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
983 struct ScsiReqBlk *srb)
984 {
985 int nseg;
986 enum dma_data_direction dir = cmd->sc_data_direction;
987 dprintkdbg(DBG_0, "build_srb: (0x%p) <%02i-%i>\n",
988 cmd, dcb->target_id, dcb->target_lun);
989
990 srb->dcb = dcb;
991 srb->cmd = cmd;
992 srb->sg_count = 0;
993 srb->total_xfer_length = 0;
994 srb->sg_bus_addr = 0;
995 srb->sg_index = 0;
996 srb->adapter_status = 0;
997 srb->target_status = 0;
998 srb->msg_count = 0;
999 srb->status = 0;
1000 srb->flag = 0;
1001 srb->state = 0;
1002 srb->retry_count = 0;
1003 srb->tag_number = TAG_NONE;
1004 srb->scsi_phase = PH_BUS_FREE; /* initial phase */
1005 srb->end_message = 0;
1006
1007 nseg = scsi_dma_map(cmd);
1008 BUG_ON(nseg < 0);
1009
1010 if (dir == PCI_DMA_NONE || !nseg) {
1011 dprintkdbg(DBG_0,
1012 "build_srb: [0] len=%d buf=%p use_sg=%d !MAP=%08x\n",
1013 cmd->bufflen, scsi_sglist(cmd), scsi_sg_count(cmd),
1014 srb->segment_x[0].address);
1015 } else {
1016 int i;
1017 u32 reqlen = scsi_bufflen(cmd);
1018 struct scatterlist *sg;
1019 struct SGentry *sgp = srb->segment_x;
1020
1021 srb->sg_count = nseg;
1022
1023 dprintkdbg(DBG_0,
1024 "build_srb: [n] len=%d buf=%p use_sg=%d segs=%d\n",
1025 reqlen, scsi_sglist(cmd), scsi_sg_count(cmd),
1026 srb->sg_count);
1027
1028 scsi_for_each_sg(cmd, sg, srb->sg_count, i) {
1029 u32 busaddr = (u32)sg_dma_address(sg);
1030 u32 seglen = (u32)sg->length;
1031 sgp[i].address = busaddr;
1032 sgp[i].length = seglen;
1033 srb->total_xfer_length += seglen;
1034 }
1035 sgp += srb->sg_count - 1;
1036
1037 /*
1038 * adjust last page if too big as it is allocated
1039 * on even page boundaries
1040 */
1041 if (srb->total_xfer_length > reqlen) {
1042 sgp->length -= (srb->total_xfer_length - reqlen);
1043 srb->total_xfer_length = reqlen;
1044 }
1045
1046 /* Fixup for WIDE padding - make sure length is even */
1047 if (dcb->sync_period & WIDE_SYNC &&
1048 srb->total_xfer_length % 2) {
1049 srb->total_xfer_length++;
1050 sgp->length++;
1051 }
1052
1053 srb->sg_bus_addr = pci_map_single(dcb->acb->dev,
1054 srb->segment_x,
1055 SEGMENTX_LEN,
1056 PCI_DMA_TODEVICE);
1057
1058 dprintkdbg(DBG_SG, "build_srb: [n] map sg %p->%08x(%05x)\n",
1059 srb->segment_x, srb->sg_bus_addr, SEGMENTX_LEN);
1060 }
1061
1062 srb->request_length = srb->total_xfer_length;
1063 }
1064
1065
1066 /**
1067 * dc395x_queue_command - queue scsi command passed from the mid
1068 * layer, invoke 'done' on completion
1069 *
1070 * @cmd: pointer to scsi command object
1071 * @done: function pointer to be invoked on completion
1072 *
1073 * Returns 1 if the adapter (host) is busy, else returns 0. One
1074 * reason for an adapter to be busy is that the number
1075 * of outstanding queued commands is already equal to
1076 * struct Scsi_Host::can_queue .
1077 *
1078 * Required: if struct Scsi_Host::can_queue is ever non-zero
1079 * then this function is required.
1080 *
1081 * Locks: struct Scsi_Host::host_lock held on entry (with "irqsave")
1082 * and is expected to be held on return.
1083 *
1084 **/
1085 static int dc395x_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
1086 {
1087 struct DeviceCtlBlk *dcb;
1088 struct ScsiReqBlk *srb;
1089 struct AdapterCtlBlk *acb =
1090 (struct AdapterCtlBlk *)cmd->device->host->hostdata;
1091 dprintkdbg(DBG_0, "queue_command: (0x%p) <%02i-%i> cmnd=0x%02x\n",
1092 cmd, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
1093
1094 /* Assume BAD_TARGET; will be cleared later */
1095 cmd->result = DID_BAD_TARGET << 16;
1096
1097 /* ignore invalid targets */
1098 if (cmd->device->id >= acb->scsi_host->max_id ||
1099 cmd->device->lun >= acb->scsi_host->max_lun ||
1100 cmd->device->lun >31) {
1101 goto complete;
1102 }
1103
1104 /* does the specified lun on the specified device exist */
1105 if (!(acb->dcb_map[cmd->device->id] & (1 << cmd->device->lun))) {
1106 dprintkl(KERN_INFO, "queue_command: Ignore target <%02i-%i>\n",
1107 cmd->device->id, cmd->device->lun);
1108 goto complete;
1109 }
1110
1111 /* do we have a DCB for the device */
1112 dcb = find_dcb(acb, cmd->device->id, cmd->device->lun);
1113 if (!dcb) {
1114 /* should never happen */
1115 dprintkl(KERN_ERR, "queue_command: No such device <%02i-%i>",
1116 cmd->device->id, cmd->device->lun);
1117 goto complete;
1118 }
1119
1120 /* set callback and clear result in the command */
1121 cmd->scsi_done = done;
1122 cmd->result = 0;
1123
1124 srb = srb_get_free(acb);
1125 if (!srb)
1126 {
1127 /*
1128 * Return 1 since we are unable to queue this command at this
1129 * point in time.
1130 */
1131 dprintkdbg(DBG_0, "queue_command: No free srb's\n");
1132 return 1;
1133 }
1134
1135 build_srb(cmd, dcb, srb);
1136
1137 if (!list_empty(&dcb->srb_waiting_list)) {
1138 /* append to waiting queue */
1139 srb_waiting_append(dcb, srb);
1140 waiting_process_next(acb);
1141 } else {
1142 /* process immediately */
1143 send_srb(acb, srb);
1144 }
1145 dprintkdbg(DBG_1, "queue_command: (0x%p) done\n", cmd);
1146 return 0;
1147
1148 complete:
1149 /*
1150 * Complete the command immediatey, and then return 0 to
1151 * indicate that we have handled the command. This is usually
1152 * done when the commad is for things like non existent
1153 * devices.
1154 */
1155 done(cmd);
1156 return 0;
1157 }
1158
1159 static DEF_SCSI_QCMD(dc395x_queue_command)
1160
1161 /*
1162 * Return the disk geometry for the given SCSI device.
1163 */
1164 static int dc395x_bios_param(struct scsi_device *sdev,
1165 struct block_device *bdev, sector_t capacity, int *info)
1166 {
1167 #ifdef CONFIG_SCSI_DC395x_TRMS1040_TRADMAP
1168 int heads, sectors, cylinders;
1169 struct AdapterCtlBlk *acb;
1170 int size = capacity;
1171
1172 dprintkdbg(DBG_0, "dc395x_bios_param..............\n");
1173 acb = (struct AdapterCtlBlk *)sdev->host->hostdata;
1174 heads = 64;
1175 sectors = 32;
1176 cylinders = size / (heads * sectors);
1177
1178 if ((acb->gmode2 & NAC_GREATER_1G) && (cylinders > 1024)) {
1179 heads = 255;
1180 sectors = 63;
1181 cylinders = size / (heads * sectors);
1182 }
1183 geom[0] = heads;
1184 geom[1] = sectors;
1185 geom[2] = cylinders;
1186 return 0;
1187 #else
1188 return scsicam_bios_param(bdev, capacity, info);
1189 #endif
1190 }
1191
1192
1193 static void dump_register_info(struct AdapterCtlBlk *acb,
1194 struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
1195 {
1196 u16 pstat;
1197 struct pci_dev *dev = acb->dev;
1198 pci_read_config_word(dev, PCI_STATUS, &pstat);
1199 if (!dcb)
1200 dcb = acb->active_dcb;
1201 if (!srb && dcb)
1202 srb = dcb->active_srb;
1203 if (srb) {
1204 if (!srb->cmd)
1205 dprintkl(KERN_INFO, "dump: srb=%p cmd=%p OOOPS!\n",
1206 srb, srb->cmd);
1207 else
1208 dprintkl(KERN_INFO, "dump: srb=%p cmd=%p "
1209 "cmnd=0x%02x <%02i-%i>\n",
1210 srb, srb->cmd,
1211 srb->cmd->cmnd[0], srb->cmd->device->id,
1212 srb->cmd->device->lun);
1213 printk(" sglist=%p cnt=%i idx=%i len=%zu\n",
1214 srb->segment_x, srb->sg_count, srb->sg_index,
1215 srb->total_xfer_length);
1216 printk(" state=0x%04x status=0x%02x phase=0x%02x (%sconn.)\n",
1217 srb->state, srb->status, srb->scsi_phase,
1218 (acb->active_dcb) ? "" : "not");
1219 }
1220 dprintkl(KERN_INFO, "dump: SCSI{status=0x%04x fifocnt=0x%02x "
1221 "signals=0x%02x irqstat=0x%02x sync=0x%02x target=0x%02x "
1222 "rselid=0x%02x ctr=0x%08x irqen=0x%02x config=0x%04x "
1223 "config2=0x%02x cmd=0x%02x selto=0x%02x}\n",
1224 DC395x_read16(acb, TRM_S1040_SCSI_STATUS),
1225 DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
1226 DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL),
1227 DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS),
1228 DC395x_read8(acb, TRM_S1040_SCSI_SYNC),
1229 DC395x_read8(acb, TRM_S1040_SCSI_TARGETID),
1230 DC395x_read8(acb, TRM_S1040_SCSI_IDMSG),
1231 DC395x_read32(acb, TRM_S1040_SCSI_COUNTER),
1232 DC395x_read8(acb, TRM_S1040_SCSI_INTEN),
1233 DC395x_read16(acb, TRM_S1040_SCSI_CONFIG0),
1234 DC395x_read8(acb, TRM_S1040_SCSI_CONFIG2),
1235 DC395x_read8(acb, TRM_S1040_SCSI_COMMAND),
1236 DC395x_read8(acb, TRM_S1040_SCSI_TIMEOUT));
1237 dprintkl(KERN_INFO, "dump: DMA{cmd=0x%04x fifocnt=0x%02x fstat=0x%02x "
1238 "irqstat=0x%02x irqen=0x%02x cfg=0x%04x tctr=0x%08x "
1239 "ctctr=0x%08x addr=0x%08x:0x%08x}\n",
1240 DC395x_read16(acb, TRM_S1040_DMA_COMMAND),
1241 DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
1242 DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
1243 DC395x_read8(acb, TRM_S1040_DMA_STATUS),
1244 DC395x_read8(acb, TRM_S1040_DMA_INTEN),
1245 DC395x_read16(acb, TRM_S1040_DMA_CONFIG),
1246 DC395x_read32(acb, TRM_S1040_DMA_XCNT),
1247 DC395x_read32(acb, TRM_S1040_DMA_CXCNT),
1248 DC395x_read32(acb, TRM_S1040_DMA_XHIGHADDR),
1249 DC395x_read32(acb, TRM_S1040_DMA_XLOWADDR));
1250 dprintkl(KERN_INFO, "dump: gen{gctrl=0x%02x gstat=0x%02x gtmr=0x%02x} "
1251 "pci{status=0x%04x}\n",
1252 DC395x_read8(acb, TRM_S1040_GEN_CONTROL),
1253 DC395x_read8(acb, TRM_S1040_GEN_STATUS),
1254 DC395x_read8(acb, TRM_S1040_GEN_TIMER),
1255 pstat);
1256 }
1257
1258
1259 static inline void clear_fifo(struct AdapterCtlBlk *acb, char *txt)
1260 {
1261 #if debug_enabled(DBG_FIFO)
1262 u8 lines = DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL);
1263 u8 fifocnt = DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT);
1264 if (!(fifocnt & 0x40))
1265 dprintkdbg(DBG_FIFO,
1266 "clear_fifo: (%i bytes) on phase %02x in %s\n",
1267 fifocnt & 0x3f, lines, txt);
1268 #endif
1269 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_CLRFIFO);
1270 }
1271
1272
1273 static void reset_dev_param(struct AdapterCtlBlk *acb)
1274 {
1275 struct DeviceCtlBlk *dcb;
1276 struct NvRamType *eeprom = &acb->eeprom;
1277 dprintkdbg(DBG_0, "reset_dev_param: acb=%p\n", acb);
1278
1279 list_for_each_entry(dcb, &acb->dcb_list, list) {
1280 u8 period_index;
1281
1282 dcb->sync_mode &= ~(SYNC_NEGO_DONE + WIDE_NEGO_DONE);
1283 dcb->sync_period = 0;
1284 dcb->sync_offset = 0;
1285
1286 dcb->dev_mode = eeprom->target[dcb->target_id].cfg0;
1287 period_index = eeprom->target[dcb->target_id].period & 0x07;
1288 dcb->min_nego_period = clock_period[period_index];
1289 if (!(dcb->dev_mode & NTC_DO_WIDE_NEGO)
1290 || !(acb->config & HCC_WIDE_CARD))
1291 dcb->sync_mode &= ~WIDE_NEGO_ENABLE;
1292 }
1293 }
1294
1295
1296 /*
1297 * perform a hard reset on the SCSI bus
1298 * @cmd - some command for this host (for fetching hooks)
1299 * Returns: SUCCESS (0x2002) on success, else FAILED (0x2003).
1300 */
1301 static int __dc395x_eh_bus_reset(struct scsi_cmnd *cmd)
1302 {
1303 struct AdapterCtlBlk *acb =
1304 (struct AdapterCtlBlk *)cmd->device->host->hostdata;
1305 dprintkl(KERN_INFO,
1306 "eh_bus_reset: (0%p) target=<%02i-%i> cmd=%p\n",
1307 cmd, cmd->device->id, cmd->device->lun, cmd);
1308
1309 if (timer_pending(&acb->waiting_timer))
1310 del_timer(&acb->waiting_timer);
1311
1312 /*
1313 * disable interrupt
1314 */
1315 DC395x_write8(acb, TRM_S1040_DMA_INTEN, 0x00);
1316 DC395x_write8(acb, TRM_S1040_SCSI_INTEN, 0x00);
1317 DC395x_write8(acb, TRM_S1040_SCSI_CONTROL, DO_RSTMODULE);
1318 DC395x_write8(acb, TRM_S1040_DMA_CONTROL, DMARESETMODULE);
1319
1320 reset_scsi_bus(acb);
1321 udelay(500);
1322
1323 /* We may be in serious trouble. Wait some seconds */
1324 acb->last_reset =
1325 jiffies + 3 * HZ / 2 +
1326 HZ * acb->eeprom.delay_time;
1327
1328 /*
1329 * re-enable interrupt
1330 */
1331 /* Clear SCSI FIFO */
1332 DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
1333 clear_fifo(acb, "eh_bus_reset");
1334 /* Delete pending IRQ */
1335 DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
1336 set_basic_config(acb);
1337
1338 reset_dev_param(acb);
1339 doing_srb_done(acb, DID_RESET, cmd, 0);
1340 acb->active_dcb = NULL;
1341 acb->acb_flag = 0; /* RESET_DETECT, RESET_DONE ,RESET_DEV */
1342 waiting_process_next(acb);
1343
1344 return SUCCESS;
1345 }
1346
1347 static int dc395x_eh_bus_reset(struct scsi_cmnd *cmd)
1348 {
1349 int rc;
1350
1351 spin_lock_irq(cmd->device->host->host_lock);
1352 rc = __dc395x_eh_bus_reset(cmd);
1353 spin_unlock_irq(cmd->device->host->host_lock);
1354
1355 return rc;
1356 }
1357
1358 /*
1359 * abort an errant SCSI command
1360 * @cmd - command to be aborted
1361 * Returns: SUCCESS (0x2002) on success, else FAILED (0x2003).
1362 */
1363 static int dc395x_eh_abort(struct scsi_cmnd *cmd)
1364 {
1365 /*
1366 * Look into our command queues: If it has not been sent already,
1367 * we remove it and return success. Otherwise fail.
1368 */
1369 struct AdapterCtlBlk *acb =
1370 (struct AdapterCtlBlk *)cmd->device->host->hostdata;
1371 struct DeviceCtlBlk *dcb;
1372 struct ScsiReqBlk *srb;
1373 dprintkl(KERN_INFO, "eh_abort: (0x%p) target=<%02i-%i> cmd=%p\n",
1374 cmd, cmd->device->id, cmd->device->lun, cmd);
1375
1376 dcb = find_dcb(acb, cmd->device->id, cmd->device->lun);
1377 if (!dcb) {
1378 dprintkl(KERN_DEBUG, "eh_abort: No such device\n");
1379 return FAILED;
1380 }
1381
1382 srb = find_cmd(cmd, &dcb->srb_waiting_list);
1383 if (srb) {
1384 srb_waiting_remove(dcb, srb);
1385 pci_unmap_srb_sense(acb, srb);
1386 pci_unmap_srb(acb, srb);
1387 free_tag(dcb, srb);
1388 srb_free_insert(acb, srb);
1389 dprintkl(KERN_DEBUG, "eh_abort: Command was waiting\n");
1390 cmd->result = DID_ABORT << 16;
1391 return SUCCESS;
1392 }
1393 srb = find_cmd(cmd, &dcb->srb_going_list);
1394 if (srb) {
1395 dprintkl(KERN_DEBUG, "eh_abort: Command in progress\n");
1396 /* XXX: Should abort the command here */
1397 } else {
1398 dprintkl(KERN_DEBUG, "eh_abort: Command not found\n");
1399 }
1400 return FAILED;
1401 }
1402
1403
1404 /* SDTR */
1405 static void build_sdtr(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
1406 struct ScsiReqBlk *srb)
1407 {
1408 u8 *ptr = srb->msgout_buf + srb->msg_count;
1409 if (srb->msg_count > 1) {
1410 dprintkl(KERN_INFO,
1411 "build_sdtr: msgout_buf BUSY (%i: %02x %02x)\n",
1412 srb->msg_count, srb->msgout_buf[0],
1413 srb->msgout_buf[1]);
1414 return;
1415 }
1416 if (!(dcb->dev_mode & NTC_DO_SYNC_NEGO)) {
1417 dcb->sync_offset = 0;
1418 dcb->min_nego_period = 200 >> 2;
1419 } else if (dcb->sync_offset == 0)
1420 dcb->sync_offset = SYNC_NEGO_OFFSET;
1421
1422 *ptr++ = MSG_EXTENDED; /* (01h) */
1423 *ptr++ = 3; /* length */
1424 *ptr++ = EXTENDED_SDTR; /* (01h) */
1425 *ptr++ = dcb->min_nego_period; /* Transfer period (in 4ns) */
1426 *ptr++ = dcb->sync_offset; /* Transfer period (max. REQ/ACK dist) */
1427 srb->msg_count += 5;
1428 srb->state |= SRB_DO_SYNC_NEGO;
1429 }
1430
1431
1432 /* WDTR */
1433 static void build_wdtr(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
1434 struct ScsiReqBlk *srb)
1435 {
1436 u8 wide = ((dcb->dev_mode & NTC_DO_WIDE_NEGO) &
1437 (acb->config & HCC_WIDE_CARD)) ? 1 : 0;
1438 u8 *ptr = srb->msgout_buf + srb->msg_count;
1439 if (srb->msg_count > 1) {
1440 dprintkl(KERN_INFO,
1441 "build_wdtr: msgout_buf BUSY (%i: %02x %02x)\n",
1442 srb->msg_count, srb->msgout_buf[0],
1443 srb->msgout_buf[1]);
1444 return;
1445 }
1446 *ptr++ = MSG_EXTENDED; /* (01h) */
1447 *ptr++ = 2; /* length */
1448 *ptr++ = EXTENDED_WDTR; /* (03h) */
1449 *ptr++ = wide;
1450 srb->msg_count += 4;
1451 srb->state |= SRB_DO_WIDE_NEGO;
1452 }
1453
1454
1455 #if 0
1456 /* Timer to work around chip flaw: When selecting and the bus is
1457 * busy, we sometimes miss a Selection timeout IRQ */
1458 void selection_timeout_missed(unsigned long ptr);
1459 /* Sets the timer to wake us up */
1460 static void selto_timer(struct AdapterCtlBlk *acb)
1461 {
1462 if (timer_pending(&acb->selto_timer))
1463 return;
1464 acb->selto_timer.function = selection_timeout_missed;
1465 acb->selto_timer.data = (unsigned long) acb;
1466 if (time_before
1467 (jiffies + HZ, acb->last_reset + HZ / 2))
1468 acb->selto_timer.expires =
1469 acb->last_reset + HZ / 2 + 1;
1470 else
1471 acb->selto_timer.expires = jiffies + HZ + 1;
1472 add_timer(&acb->selto_timer);
1473 }
1474
1475
1476 void selection_timeout_missed(unsigned long ptr)
1477 {
1478 unsigned long flags;
1479 struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)ptr;
1480 struct ScsiReqBlk *srb;
1481 dprintkl(KERN_DEBUG, "Chip forgot to produce SelTO IRQ!\n");
1482 if (!acb->active_dcb || !acb->active_dcb->active_srb) {
1483 dprintkl(KERN_DEBUG, "... but no cmd pending? Oops!\n");
1484 return;
1485 }
1486 DC395x_LOCK_IO(acb->scsi_host, flags);
1487 srb = acb->active_dcb->active_srb;
1488 disconnect(acb);
1489 DC395x_UNLOCK_IO(acb->scsi_host, flags);
1490 }
1491 #endif
1492
1493
1494 static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
1495 struct ScsiReqBlk* srb)
1496 {
1497 u16 s_stat2, return_code;
1498 u8 s_stat, scsicommand, i, identify_message;
1499 u8 *ptr;
1500 dprintkdbg(DBG_0, "start_scsi: (0x%p) <%02i-%i> srb=%p\n",
1501 dcb->target_id, dcb->target_lun, srb);
1502
1503 srb->tag_number = TAG_NONE; /* acb->tag_max_num: had error read in eeprom */
1504
1505 s_stat = DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL);
1506 s_stat2 = 0;
1507 s_stat2 = DC395x_read16(acb, TRM_S1040_SCSI_STATUS);
1508 #if 1
1509 if (s_stat & 0x20 /* s_stat2 & 0x02000 */ ) {
1510 dprintkdbg(DBG_KG, "start_scsi: (0x%p) BUSY %02x %04x\n",
1511 s_stat, s_stat2);
1512 /*
1513 * Try anyway?
1514 *
1515 * We could, BUT: Sometimes the TRM_S1040 misses to produce a Selection
1516 * Timeout, a Disconnect or a Reselection IRQ, so we would be screwed!
1517 * (This is likely to be a bug in the hardware. Obviously, most people
1518 * only have one initiator per SCSI bus.)
1519 * Instead let this fail and have the timer make sure the command is
1520 * tried again after a short time
1521 */
1522 /*selto_timer (acb); */
1523 return 1;
1524 }
1525 #endif
1526 if (acb->active_dcb) {
1527 dprintkl(KERN_DEBUG, "start_scsi: (0x%p) Attempt to start a"
1528 "command while another command (0x%p) is active.",
1529 srb->cmd,
1530 acb->active_dcb->active_srb ?
1531 acb->active_dcb->active_srb->cmd : 0);
1532 return 1;
1533 }
1534 if (DC395x_read16(acb, TRM_S1040_SCSI_STATUS) & SCSIINTERRUPT) {
1535 dprintkdbg(DBG_KG, "start_scsi: (0x%p) Failed (busy)\n", srb->cmd);
1536 return 1;
1537 }
1538 /* Allow starting of SCSI commands half a second before we allow the mid-level
1539 * to queue them again after a reset */
1540 if (time_before(jiffies, acb->last_reset - HZ / 2)) {
1541 dprintkdbg(DBG_KG, "start_scsi: Refuse cmds (reset wait)\n");
1542 return 1;
1543 }
1544
1545 /* Flush FIFO */
1546 clear_fifo(acb, "start_scsi");
1547 DC395x_write8(acb, TRM_S1040_SCSI_HOSTID, acb->scsi_host->this_id);
1548 DC395x_write8(acb, TRM_S1040_SCSI_TARGETID, dcb->target_id);
1549 DC395x_write8(acb, TRM_S1040_SCSI_SYNC, dcb->sync_period);
1550 DC395x_write8(acb, TRM_S1040_SCSI_OFFSET, dcb->sync_offset);
1551 srb->scsi_phase = PH_BUS_FREE; /* initial phase */
1552
1553 identify_message = dcb->identify_msg;
1554 /*DC395x_TRM_write8(TRM_S1040_SCSI_IDMSG, identify_message); */
1555 /* Don't allow disconnection for AUTO_REQSENSE: Cont.All.Cond.! */
1556 if (srb->flag & AUTO_REQSENSE)
1557 identify_message &= 0xBF;
1558
1559 if (((srb->cmd->cmnd[0] == INQUIRY)
1560 || (srb->cmd->cmnd[0] == REQUEST_SENSE)
1561 || (srb->flag & AUTO_REQSENSE))
1562 && (((dcb->sync_mode & WIDE_NEGO_ENABLE)
1563 && !(dcb->sync_mode & WIDE_NEGO_DONE))
1564 || ((dcb->sync_mode & SYNC_NEGO_ENABLE)
1565 && !(dcb->sync_mode & SYNC_NEGO_DONE)))
1566 && (dcb->target_lun == 0)) {
1567 srb->msgout_buf[0] = identify_message;
1568 srb->msg_count = 1;
1569 scsicommand = SCMD_SEL_ATNSTOP;
1570 srb->state = SRB_MSGOUT;
1571 #ifndef SYNC_FIRST
1572 if (dcb->sync_mode & WIDE_NEGO_ENABLE
1573 && dcb->inquiry7 & SCSI_INQ_WBUS16) {
1574 build_wdtr(acb, dcb, srb);
1575 goto no_cmd;
1576 }
1577 #endif
1578 if (dcb->sync_mode & SYNC_NEGO_ENABLE
1579 && dcb->inquiry7 & SCSI_INQ_SYNC) {
1580 build_sdtr(acb, dcb, srb);
1581 goto no_cmd;
1582 }
1583 if (dcb->sync_mode & WIDE_NEGO_ENABLE
1584 && dcb->inquiry7 & SCSI_INQ_WBUS16) {
1585 build_wdtr(acb, dcb, srb);
1586 goto no_cmd;
1587 }
1588 srb->msg_count = 0;
1589 }
1590 /* Send identify message */
1591 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, identify_message);
1592
1593 scsicommand = SCMD_SEL_ATN;
1594 srb->state = SRB_START_;
1595 #ifndef DC395x_NO_TAGQ
1596 if ((dcb->sync_mode & EN_TAG_QUEUEING)
1597 && (identify_message & 0xC0)) {
1598 /* Send Tag message */
1599 u32 tag_mask = 1;
1600 u8 tag_number = 0;
1601 while (tag_mask & dcb->tag_mask
1602 && tag_number < dcb->max_command) {
1603 tag_mask = tag_mask << 1;
1604 tag_number++;
1605 }
1606 if (tag_number >= dcb->max_command) {
1607 dprintkl(KERN_WARNING, "start_scsi: (0x%p) "
1608 "Out of tags target=<%02i-%i>)\n",
1609 srb->cmd, srb->cmd->device->id,
1610 srb->cmd->device->lun);
1611 srb->state = SRB_READY;
1612 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
1613 DO_HWRESELECT);
1614 return 1;
1615 }
1616 /* Send Tag id */
1617 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, MSG_SIMPLE_QTAG);
1618 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, tag_number);
1619 dcb->tag_mask |= tag_mask;
1620 srb->tag_number = tag_number;
1621 scsicommand = SCMD_SEL_ATN3;
1622 srb->state = SRB_START_;
1623 }
1624 #endif
1625 /*polling:*/
1626 /* Send CDB ..command block ......... */
1627 dprintkdbg(DBG_KG, "start_scsi: (0x%p) <%02i-%i> cmnd=0x%02x tag=%i\n",
1628 srb->cmd, srb->cmd->device->id, srb->cmd->device->lun,
1629 srb->cmd->cmnd[0], srb->tag_number);
1630 if (srb->flag & AUTO_REQSENSE) {
1631 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, REQUEST_SENSE);
1632 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, (dcb->target_lun << 5));
1633 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
1634 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
1635 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, SCSI_SENSE_BUFFERSIZE);
1636 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
1637 } else {
1638 ptr = (u8 *)srb->cmd->cmnd;
1639 for (i = 0; i < srb->cmd->cmd_len; i++)
1640 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *ptr++);
1641 }
1642 no_cmd:
1643 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
1644 DO_HWRESELECT | DO_DATALATCH);
1645 if (DC395x_read16(acb, TRM_S1040_SCSI_STATUS) & SCSIINTERRUPT) {
1646 /*
1647 * If start_scsi return 1:
1648 * we caught an interrupt (must be reset or reselection ... )
1649 * : Let's process it first!
1650 */
1651 dprintkdbg(DBG_0, "start_scsi: (0x%p) <%02i-%i> Failed - busy\n",
1652 srb->cmd, dcb->target_id, dcb->target_lun);
1653 srb->state = SRB_READY;
1654 free_tag(dcb, srb);
1655 srb->msg_count = 0;
1656 return_code = 1;
1657 /* This IRQ should NOT get lost, as we did not acknowledge it */
1658 } else {
1659 /*
1660 * If start_scsi returns 0:
1661 * we know that the SCSI processor is free
1662 */
1663 srb->scsi_phase = PH_BUS_FREE; /* initial phase */
1664 dcb->active_srb = srb;
1665 acb->active_dcb = dcb;
1666 return_code = 0;
1667 /* it's important for atn stop */
1668 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
1669 DO_DATALATCH | DO_HWRESELECT);
1670 /* SCSI command */
1671 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, scsicommand);
1672 }
1673 return return_code;
1674 }
1675
1676
1677 #define DC395x_ENABLE_MSGOUT \
1678 DC395x_write16 (acb, TRM_S1040_SCSI_CONTROL, DO_SETATN); \
1679 srb->state |= SRB_MSGOUT
1680
1681
1682 /* abort command */
1683 static inline void enable_msgout_abort(struct AdapterCtlBlk *acb,
1684 struct ScsiReqBlk *srb)
1685 {
1686 srb->msgout_buf[0] = ABORT;
1687 srb->msg_count = 1;
1688 DC395x_ENABLE_MSGOUT;
1689 srb->state &= ~SRB_MSGIN;
1690 srb->state |= SRB_MSGOUT;
1691 }
1692
1693
1694 /**
1695 * dc395x_handle_interrupt - Handle an interrupt that has been confirmed to
1696 * have been triggered for this card.
1697 *
1698 * @acb: a pointer to the adpter control block
1699 * @scsi_status: the status return when we checked the card
1700 **/
1701 static void dc395x_handle_interrupt(struct AdapterCtlBlk *acb,
1702 u16 scsi_status)
1703 {
1704 struct DeviceCtlBlk *dcb;
1705 struct ScsiReqBlk *srb;
1706 u16 phase;
1707 u8 scsi_intstatus;
1708 unsigned long flags;
1709 void (*dc395x_statev)(struct AdapterCtlBlk *, struct ScsiReqBlk *,
1710 u16 *);
1711
1712 DC395x_LOCK_IO(acb->scsi_host, flags);
1713
1714 /* This acknowledges the IRQ */
1715 scsi_intstatus = DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
1716 if ((scsi_status & 0x2007) == 0x2002)
1717 dprintkl(KERN_DEBUG,
1718 "COP after COP completed? %04x\n", scsi_status);
1719 if (debug_enabled(DBG_KG)) {
1720 if (scsi_intstatus & INT_SELTIMEOUT)
1721 dprintkdbg(DBG_KG, "handle_interrupt: Selection timeout\n");
1722 }
1723 /*dprintkl(KERN_DEBUG, "handle_interrupt: intstatus = 0x%02x ", scsi_intstatus); */
1724
1725 if (timer_pending(&acb->selto_timer))
1726 del_timer(&acb->selto_timer);
1727
1728 if (scsi_intstatus & (INT_SELTIMEOUT | INT_DISCONNECT)) {
1729 disconnect(acb); /* bus free interrupt */
1730 goto out_unlock;
1731 }
1732 if (scsi_intstatus & INT_RESELECTED) {
1733 reselect(acb);
1734 goto out_unlock;
1735 }
1736 if (scsi_intstatus & INT_SELECT) {
1737 dprintkl(KERN_INFO, "Host does not support target mode!\n");
1738 goto out_unlock;
1739 }
1740 if (scsi_intstatus & INT_SCSIRESET) {
1741 scsi_reset_detect(acb);
1742 goto out_unlock;
1743 }
1744 if (scsi_intstatus & (INT_BUSSERVICE | INT_CMDDONE)) {
1745 dcb = acb->active_dcb;
1746 if (!dcb) {
1747 dprintkl(KERN_DEBUG,
1748 "Oops: BusService (%04x %02x) w/o ActiveDCB!\n",
1749 scsi_status, scsi_intstatus);
1750 goto out_unlock;
1751 }
1752 srb = dcb->active_srb;
1753 if (dcb->flag & ABORT_DEV_) {
1754 dprintkdbg(DBG_0, "MsgOut Abort Device.....\n");
1755 enable_msgout_abort(acb, srb);
1756 }
1757
1758 /* software sequential machine */
1759 phase = (u16)srb->scsi_phase;
1760
1761 /*
1762 * 62037 or 62137
1763 * call dc395x_scsi_phase0[]... "phase entry"
1764 * handle every phase before start transfer
1765 */
1766 /* data_out_phase0, phase:0 */
1767 /* data_in_phase0, phase:1 */
1768 /* command_phase0, phase:2 */
1769 /* status_phase0, phase:3 */
1770 /* nop0, phase:4 PH_BUS_FREE .. initial phase */
1771 /* nop0, phase:5 PH_BUS_FREE .. initial phase */
1772 /* msgout_phase0, phase:6 */
1773 /* msgin_phase0, phase:7 */
1774 dc395x_statev = dc395x_scsi_phase0[phase];
1775 dc395x_statev(acb, srb, &scsi_status);
1776
1777 /*
1778 * if there were any exception occurred scsi_status
1779 * will be modify to bus free phase new scsi_status
1780 * transfer out from ... previous dc395x_statev
1781 */
1782 srb->scsi_phase = scsi_status & PHASEMASK;
1783 phase = (u16)scsi_status & PHASEMASK;
1784
1785 /*
1786 * call dc395x_scsi_phase1[]... "phase entry" handle
1787 * every phase to do transfer
1788 */
1789 /* data_out_phase1, phase:0 */
1790 /* data_in_phase1, phase:1 */
1791 /* command_phase1, phase:2 */
1792 /* status_phase1, phase:3 */
1793 /* nop1, phase:4 PH_BUS_FREE .. initial phase */
1794 /* nop1, phase:5 PH_BUS_FREE .. initial phase */
1795 /* msgout_phase1, phase:6 */
1796 /* msgin_phase1, phase:7 */
1797 dc395x_statev = dc395x_scsi_phase1[phase];
1798 dc395x_statev(acb, srb, &scsi_status);
1799 }
1800 out_unlock:
1801 DC395x_UNLOCK_IO(acb->scsi_host, flags);
1802 }
1803
1804
1805 static irqreturn_t dc395x_interrupt(int irq, void *dev_id)
1806 {
1807 struct AdapterCtlBlk *acb = dev_id;
1808 u16 scsi_status;
1809 u8 dma_status;
1810 irqreturn_t handled = IRQ_NONE;
1811
1812 /*
1813 * Check for pending interrupt
1814 */
1815 scsi_status = DC395x_read16(acb, TRM_S1040_SCSI_STATUS);
1816 dma_status = DC395x_read8(acb, TRM_S1040_DMA_STATUS);
1817 if (scsi_status & SCSIINTERRUPT) {
1818 /* interrupt pending - let's process it! */
1819 dc395x_handle_interrupt(acb, scsi_status);
1820 handled = IRQ_HANDLED;
1821 }
1822 else if (dma_status & 0x20) {
1823 /* Error from the DMA engine */
1824 dprintkl(KERN_INFO, "Interrupt from DMA engine: 0x%02x!\n", dma_status);
1825 #if 0
1826 dprintkl(KERN_INFO, "This means DMA error! Try to handle ...\n");
1827 if (acb->active_dcb) {
1828 acb->active_dcb-> flag |= ABORT_DEV_;
1829 if (acb->active_dcb->active_srb)
1830 enable_msgout_abort(acb, acb->active_dcb->active_srb);
1831 }
1832 DC395x_write8(acb, TRM_S1040_DMA_CONTROL, ABORTXFER | CLRXFIFO);
1833 #else
1834 dprintkl(KERN_INFO, "Ignoring DMA error (probably a bad thing) ...\n");
1835 acb = NULL;
1836 #endif
1837 handled = IRQ_HANDLED;
1838 }
1839
1840 return handled;
1841 }
1842
1843
1844 static void msgout_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
1845 u16 *pscsi_status)
1846 {
1847 dprintkdbg(DBG_0, "msgout_phase0: (0x%p)\n", srb->cmd);
1848 if (srb->state & (SRB_UNEXPECT_RESEL + SRB_ABORT_SENT))
1849 *pscsi_status = PH_BUS_FREE; /*.. initial phase */
1850
1851 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
1852 srb->state &= ~SRB_MSGOUT;
1853 }
1854
1855
1856 static void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
1857 u16 *pscsi_status)
1858 {
1859 u16 i;
1860 u8 *ptr;
1861 dprintkdbg(DBG_0, "msgout_phase1: (0x%p)\n", srb->cmd);
1862
1863 clear_fifo(acb, "msgout_phase1");
1864 if (!(srb->state & SRB_MSGOUT)) {
1865 srb->state |= SRB_MSGOUT;
1866 dprintkl(KERN_DEBUG,
1867 "msgout_phase1: (0x%p) Phase unexpected\n",
1868 srb->cmd); /* So what ? */
1869 }
1870 if (!srb->msg_count) {
1871 dprintkdbg(DBG_0, "msgout_phase1: (0x%p) NOP msg\n",
1872 srb->cmd);
1873 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, MSG_NOP);
1874 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
1875 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_OUT);
1876 return;
1877 }
1878 ptr = (u8 *)srb->msgout_buf;
1879 for (i = 0; i < srb->msg_count; i++)
1880 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *ptr++);
1881 srb->msg_count = 0;
1882 if (srb->msgout_buf[0] == MSG_ABORT)
1883 srb->state = SRB_ABORT_SENT;
1884
1885 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_OUT);
1886 }
1887
1888
1889 static void command_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
1890 u16 *pscsi_status)
1891 {
1892 dprintkdbg(DBG_0, "command_phase0: (0x%p)\n", srb->cmd);
1893 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
1894 }
1895
1896
1897 static void command_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
1898 u16 *pscsi_status)
1899 {
1900 struct DeviceCtlBlk *dcb;
1901 u8 *ptr;
1902 u16 i;
1903 dprintkdbg(DBG_0, "command_phase1: (0x%p)\n", srb->cmd);
1904
1905 clear_fifo(acb, "command_phase1");
1906 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_CLRATN);
1907 if (!(srb->flag & AUTO_REQSENSE)) {
1908 ptr = (u8 *)srb->cmd->cmnd;
1909 for (i = 0; i < srb->cmd->cmd_len; i++) {
1910 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *ptr);
1911 ptr++;
1912 }
1913 } else {
1914 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, REQUEST_SENSE);
1915 dcb = acb->active_dcb;
1916 /* target id */
1917 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, (dcb->target_lun << 5));
1918 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
1919 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
1920 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, SCSI_SENSE_BUFFERSIZE);
1921 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
1922 }
1923 srb->state |= SRB_COMMAND;
1924 /* it's important for atn stop */
1925 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
1926 /* SCSI command */
1927 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_OUT);
1928 }
1929
1930
1931 /*
1932 * Verify that the remaining space in the hw sg lists is the same as
1933 * the count of remaining bytes in srb->total_xfer_length
1934 */
1935 static void sg_verify_length(struct ScsiReqBlk *srb)
1936 {
1937 if (debug_enabled(DBG_SG)) {
1938 unsigned len = 0;
1939 unsigned idx = srb->sg_index;
1940 struct SGentry *psge = srb->segment_x + idx;
1941 for (; idx < srb->sg_count; psge++, idx++)
1942 len += psge->length;
1943 if (len != srb->total_xfer_length)
1944 dprintkdbg(DBG_SG,
1945 "Inconsistent SRB S/G lengths (Tot=%i, Count=%i) !!\n",
1946 srb->total_xfer_length, len);
1947 }
1948 }
1949
1950
1951 /*
1952 * Compute the next Scatter Gather list index and adjust its length
1953 * and address if necessary
1954 */
1955 static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
1956 {
1957 u8 idx;
1958 u32 xferred = srb->total_xfer_length - left; /* bytes transferred */
1959 struct SGentry *psge = srb->segment_x + srb->sg_index;
1960
1961 dprintkdbg(DBG_0,
1962 "sg_update_list: Transferred %i of %i bytes, %i remain\n",
1963 xferred, srb->total_xfer_length, left);
1964 if (xferred == 0) {
1965 /* nothing to update since we did not transfer any data */
1966 return;
1967 }
1968
1969 sg_verify_length(srb);
1970 srb->total_xfer_length = left; /* update remaining count */
1971 for (idx = srb->sg_index; idx < srb->sg_count; idx++) {
1972 if (xferred >= psge->length) {
1973 /* Complete SG entries done */
1974 xferred -= psge->length;
1975 } else {
1976 /* Partial SG entry done */
1977 psge->length -= xferred;
1978 psge->address += xferred;
1979 srb->sg_index = idx;
1980 pci_dma_sync_single_for_device(srb->dcb->
1981 acb->dev,
1982 srb->sg_bus_addr,
1983 SEGMENTX_LEN,
1984 PCI_DMA_TODEVICE);
1985 break;
1986 }
1987 psge++;
1988 }
1989 sg_verify_length(srb);
1990 }
1991
1992
1993 /*
1994 * We have transferred a single byte (PIO mode?) and need to update
1995 * the count of bytes remaining (total_xfer_length) and update the sg
1996 * entry to either point to next byte in the current sg entry, or of
1997 * already at the end to point to the start of the next sg entry
1998 */
1999 static void sg_subtract_one(struct ScsiReqBlk *srb)
2000 {
2001 sg_update_list(srb, srb->total_xfer_length - 1);
2002 }
2003
2004
2005 /*
2006 * cleanup_after_transfer
2007 *
2008 * Makes sure, DMA and SCSI engine are empty, after the transfer has finished
2009 * KG: Currently called from StatusPhase1 ()
2010 * Should probably also be called from other places
2011 * Best might be to call it in DataXXPhase0, if new phase will differ
2012 */
2013 static void cleanup_after_transfer(struct AdapterCtlBlk *acb,
2014 struct ScsiReqBlk *srb)
2015 {
2016 /*DC395x_write8 (TRM_S1040_DMA_STATUS, FORCEDMACOMP); */
2017 if (DC395x_read16(acb, TRM_S1040_DMA_COMMAND) & 0x0001) { /* read */
2018 if (!(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x40))
2019 clear_fifo(acb, "cleanup/in");
2020 if (!(DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT) & 0x80))
2021 DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
2022 } else { /* write */
2023 if (!(DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT) & 0x80))
2024 DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
2025 if (!(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x40))
2026 clear_fifo(acb, "cleanup/out");
2027 }
2028 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
2029 }
2030
2031
2032 /*
2033 * Those no of bytes will be transferred w/ PIO through the SCSI FIFO
2034 * Seems to be needed for unknown reasons; could be a hardware bug :-(
2035 */
2036 #define DC395x_LASTPIO 4
2037
2038
2039 static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2040 u16 *pscsi_status)
2041 {
2042 struct DeviceCtlBlk *dcb = srb->dcb;
2043 u16 scsi_status = *pscsi_status;
2044 u32 d_left_counter = 0;
2045 dprintkdbg(DBG_0, "data_out_phase0: (0x%p) <%02i-%i>\n",
2046 srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
2047
2048 /*
2049 * KG: We need to drain the buffers before we draw any conclusions!
2050 * This means telling the DMA to push the rest into SCSI, telling
2051 * SCSI to push the rest to the bus.
2052 * However, the device might have been the one to stop us (phase
2053 * change), and the data in transit just needs to be accounted so
2054 * it can be retransmitted.)
2055 */
2056 /*
2057 * KG: Stop DMA engine pushing more data into the SCSI FIFO
2058 * If we need more data, the DMA SG list will be freshly set up, anyway
2059 */
2060 dprintkdbg(DBG_PIO, "data_out_phase0: "
2061 "DMA{fifocnt=0x%02x fifostat=0x%02x} "
2062 "SCSI{fifocnt=0x%02x cnt=0x%06x status=0x%04x} total=0x%06x\n",
2063 DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
2064 DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
2065 DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
2066 DC395x_read32(acb, TRM_S1040_SCSI_COUNTER), scsi_status,
2067 srb->total_xfer_length);
2068 DC395x_write8(acb, TRM_S1040_DMA_CONTROL, STOPDMAXFER | CLRXFIFO);
2069
2070 if (!(srb->state & SRB_XFERPAD)) {
2071 if (scsi_status & PARITYERROR)
2072 srb->status |= PARITY_ERROR;
2073
2074 /*
2075 * KG: Right, we can't just rely on the SCSI_COUNTER, because this
2076 * is the no of bytes it got from the DMA engine not the no it
2077 * transferred successfully to the device. (And the difference could
2078 * be as much as the FIFO size, I guess ...)
2079 */
2080 if (!(scsi_status & SCSIXFERDONE)) {
2081 /*
2082 * when data transfer from DMA FIFO to SCSI FIFO
2083 * if there was some data left in SCSI FIFO
2084 */
2085 d_left_counter =
2086 (u32)(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) &
2087 0x1F);
2088 if (dcb->sync_period & WIDE_SYNC)
2089 d_left_counter <<= 1;
2090
2091 dprintkdbg(DBG_KG, "data_out_phase0: FIFO contains %i %s\n"
2092 "SCSI{fifocnt=0x%02x cnt=0x%08x} "
2093 "DMA{fifocnt=0x%04x cnt=0x%02x ctr=0x%08x}\n",
2094 DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
2095 (dcb->sync_period & WIDE_SYNC) ? "words" : "bytes",
2096 DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
2097 DC395x_read32(acb, TRM_S1040_SCSI_COUNTER),
2098 DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
2099 DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
2100 DC395x_read32(acb, TRM_S1040_DMA_CXCNT));
2101 }
2102 /*
2103 * calculate all the residue data that not yet tranfered
2104 * SCSI transfer counter + left in SCSI FIFO data
2105 *
2106 * .....TRM_S1040_SCSI_COUNTER (24bits)
2107 * The counter always decrement by one for every SCSI byte transfer.
2108 * .....TRM_S1040_SCSI_FIFOCNT ( 5bits)
2109 * The counter is SCSI FIFO offset counter (in units of bytes or! words)
2110 */
2111 if (srb->total_xfer_length > DC395x_LASTPIO)
2112 d_left_counter +=
2113 DC395x_read32(acb, TRM_S1040_SCSI_COUNTER);
2114
2115 /* Is this a good idea? */
2116 /*clear_fifo(acb, "DOP1"); */
2117 /* KG: What is this supposed to be useful for? WIDE padding stuff? */
2118 if (d_left_counter == 1 && dcb->sync_period & WIDE_SYNC
2119 && scsi_bufflen(srb->cmd) % 2) {
2120 d_left_counter = 0;
2121 dprintkl(KERN_INFO,
2122 "data_out_phase0: Discard 1 byte (0x%02x)\n",
2123 scsi_status);
2124 }
2125 /*
2126 * KG: Oops again. Same thinko as above: The SCSI might have been
2127 * faster than the DMA engine, so that it ran out of data.
2128 * In that case, we have to do just nothing!
2129 * But: Why the interrupt: No phase change. No XFERCNT_2_ZERO. Or?
2130 */
2131 /*
2132 * KG: This is nonsense: We have been WRITING data to the bus
2133 * If the SCSI engine has no bytes left, how should the DMA engine?
2134 */
2135 if (d_left_counter == 0) {
2136 srb->total_xfer_length = 0;
2137 } else {
2138 /*
2139 * if transfer not yet complete
2140 * there were some data residue in SCSI FIFO or
2141 * SCSI transfer counter not empty
2142 */
2143 long oldxferred =
2144 srb->total_xfer_length - d_left_counter;
2145 const int diff =
2146 (dcb->sync_period & WIDE_SYNC) ? 2 : 1;
2147 sg_update_list(srb, d_left_counter);
2148 /* KG: Most ugly hack! Apparently, this works around a chip bug */
2149 if ((srb->segment_x[srb->sg_index].length ==
2150 diff && scsi_sg_count(srb->cmd))
2151 || ((oldxferred & ~PAGE_MASK) ==
2152 (PAGE_SIZE - diff))
2153 ) {
2154 dprintkl(KERN_INFO, "data_out_phase0: "
2155 "Work around chip bug (%i)?\n", diff);
2156 d_left_counter =
2157 srb->total_xfer_length - diff;
2158 sg_update_list(srb, d_left_counter);
2159 /*srb->total_xfer_length -= diff; */
2160 /*srb->virt_addr += diff; */
2161 /*if (srb->cmd->use_sg) */
2162 /* srb->sg_index++; */
2163 }
2164 }
2165 }
2166 if ((*pscsi_status & PHASEMASK) != PH_DATA_OUT) {
2167 cleanup_after_transfer(acb, srb);
2168 }
2169 }
2170
2171
2172 static void data_out_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2173 u16 *pscsi_status)
2174 {
2175 dprintkdbg(DBG_0, "data_out_phase1: (0x%p) <%02i-%i>\n",
2176 srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
2177 clear_fifo(acb, "data_out_phase1");
2178 /* do prepare before transfer when data out phase */
2179 data_io_transfer(acb, srb, XFERDATAOUT);
2180 }
2181
2182 static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2183 u16 *pscsi_status)
2184 {
2185 u16 scsi_status = *pscsi_status;
2186
2187 dprintkdbg(DBG_0, "data_in_phase0: (0x%p) <%02i-%i>\n",
2188 srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
2189
2190 /*
2191 * KG: DataIn is much more tricky than DataOut. When the device is finished
2192 * and switches to another phase, the SCSI engine should be finished too.
2193 * But: There might still be bytes left in its FIFO to be fetched by the DMA
2194 * engine and transferred to memory.
2195 * We should wait for the FIFOs to be emptied by that (is there any way to
2196 * enforce this?) and then stop the DMA engine, because it might think, that
2197 * there are more bytes to follow. Yes, the device might disconnect prior to
2198 * having all bytes transferred!
2199 * Also we should make sure that all data from the DMA engine buffer's really
2200 * made its way to the system memory! Some documentation on this would not
2201 * seem to be a bad idea, actually.
2202 */
2203 if (!(srb->state & SRB_XFERPAD)) {
2204 u32 d_left_counter;
2205 unsigned int sc, fc;
2206
2207 if (scsi_status & PARITYERROR) {
2208 dprintkl(KERN_INFO, "data_in_phase0: (0x%p) "
2209 "Parity Error\n", srb->cmd);
2210 srb->status |= PARITY_ERROR;
2211 }
2212 /*
2213 * KG: We should wait for the DMA FIFO to be empty ...
2214 * but: it would be better to wait first for the SCSI FIFO and then the
2215 * the DMA FIFO to become empty? How do we know, that the device not already
2216 * sent data to the FIFO in a MsgIn phase, eg.?
2217 */
2218 if (!(DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT) & 0x80)) {
2219 #if 0
2220 int ctr = 6000000;
2221 dprintkl(KERN_DEBUG,
2222 "DIP0: Wait for DMA FIFO to flush ...\n");
2223 /*DC395x_write8 (TRM_S1040_DMA_CONTROL, STOPDMAXFER); */
2224 /*DC395x_write32 (TRM_S1040_SCSI_COUNTER, 7); */
2225 /*DC395x_write8 (TRM_S1040_SCSI_COMMAND, SCMD_DMA_IN); */
2226 while (!
2227 (DC395x_read16(acb, TRM_S1040_DMA_FIFOSTAT) &
2228 0x80) && --ctr);
2229 if (ctr < 6000000 - 1)
2230 dprintkl(KERN_DEBUG
2231 "DIP0: Had to wait for DMA ...\n");
2232 if (!ctr)
2233 dprintkl(KERN_ERR,
2234 "Deadlock in DIP0 waiting for DMA FIFO empty!!\n");
2235 /*DC395x_write32 (TRM_S1040_SCSI_COUNTER, 0); */
2236 #endif
2237 dprintkdbg(DBG_KG, "data_in_phase0: "
2238 "DMA{fifocnt=0x%02x fifostat=0x%02x}\n",
2239 DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
2240 DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT));
2241 }
2242 /* Now: Check remainig data: The SCSI counters should tell us ... */
2243 sc = DC395x_read32(acb, TRM_S1040_SCSI_COUNTER);
2244 fc = DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT);
2245 d_left_counter = sc + ((fc & 0x1f)
2246 << ((srb->dcb->sync_period & WIDE_SYNC) ? 1 :
2247 0));
2248 dprintkdbg(DBG_KG, "data_in_phase0: "
2249 "SCSI{fifocnt=0x%02x%s ctr=0x%08x} "
2250 "DMA{fifocnt=0x%02x fifostat=0x%02x ctr=0x%08x} "
2251 "Remain{totxfer=%i scsi_fifo+ctr=%i}\n",
2252 fc,
2253 (srb->dcb->sync_period & WIDE_SYNC) ? "words" : "bytes",
2254 sc,
2255 fc,
2256 DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
2257 DC395x_read32(acb, TRM_S1040_DMA_CXCNT),
2258 srb->total_xfer_length, d_left_counter);
2259 #if DC395x_LASTPIO
2260 /* KG: Less than or equal to 4 bytes can not be transferred via DMA, it seems. */
2261 if (d_left_counter
2262 && srb->total_xfer_length <= DC395x_LASTPIO) {
2263 size_t left_io = srb->total_xfer_length;
2264
2265 /*u32 addr = (srb->segment_x[srb->sg_index].address); */
2266 /*sg_update_list (srb, d_left_counter); */
2267 dprintkdbg(DBG_PIO, "data_in_phase0: PIO (%i %s) "
2268 "for remaining %i bytes:",
2269 fc & 0x1f,
2270 (srb->dcb->sync_period & WIDE_SYNC) ?
2271 "words" : "bytes",
2272 srb->total_xfer_length);
2273 if (srb->dcb->sync_period & WIDE_SYNC)
2274 DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2,
2275 CFG2_WIDEFIFO);
2276 while (left_io) {
2277 unsigned char *virt, *base = NULL;
2278 unsigned long flags = 0;
2279 size_t len = left_io;
2280 size_t offset = srb->request_length - left_io;
2281
2282 local_irq_save(flags);
2283 /* Assumption: it's inside one page as it's at most 4 bytes and
2284 I just assume it's on a 4-byte boundary */
2285 base = scsi_kmap_atomic_sg(scsi_sglist(srb->cmd),
2286 srb->sg_count, &offset, &len);
2287 virt = base + offset;
2288
2289 left_io -= len;
2290
2291 while (len) {
2292 u8 byte;
2293 byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
2294 *virt++ = byte;
2295
2296 if (debug_enabled(DBG_PIO))
2297 printk(" %02x", byte);
2298
2299 d_left_counter--;
2300 sg_subtract_one(srb);
2301
2302 len--;
2303
2304 fc = DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT);
2305
2306 if (fc == 0x40) {
2307 left_io = 0;
2308 break;
2309 }
2310 }
2311
2312 WARN_ON((fc != 0x40) == !d_left_counter);
2313
2314 if (fc == 0x40 && (srb->dcb->sync_period & WIDE_SYNC)) {
2315 /* Read the last byte ... */
2316 if (srb->total_xfer_length > 0) {
2317 u8 byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
2318
2319 *virt++ = byte;
2320 srb->total_xfer_length--;
2321 if (debug_enabled(DBG_PIO))
2322 printk(" %02x", byte);
2323 }
2324
2325 DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2, 0);
2326 }
2327
2328 scsi_kunmap_atomic_sg(base);
2329 local_irq_restore(flags);
2330 }
2331 /*printk(" %08x", *(u32*)(bus_to_virt (addr))); */
2332 /*srb->total_xfer_length = 0; */
2333 if (debug_enabled(DBG_PIO))
2334 printk("\n");
2335 }
2336 #endif /* DC395x_LASTPIO */
2337
2338 #if 0
2339 /*
2340 * KG: This was in DATAOUT. Does it also belong here?
2341 * Nobody seems to know what counter and fifo_cnt count exactly ...
2342 */
2343 if (!(scsi_status & SCSIXFERDONE)) {
2344 /*
2345 * when data transfer from DMA FIFO to SCSI FIFO
2346 * if there was some data left in SCSI FIFO
2347 */
2348 d_left_counter =
2349 (u32)(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) &
2350 0x1F);
2351 if (srb->dcb->sync_period & WIDE_SYNC)
2352 d_left_counter <<= 1;
2353 /*
2354 * if WIDE scsi SCSI FIFOCNT unit is word !!!
2355 * so need to *= 2
2356 * KG: Seems to be correct ...
2357 */
2358 }
2359 #endif
2360 /* KG: This should not be needed any more! */
2361 if (d_left_counter == 0
2362 || (scsi_status & SCSIXFERCNT_2_ZERO)) {
2363 #if 0
2364 int ctr = 6000000;
2365 u8 TempDMAstatus;
2366 do {
2367 TempDMAstatus =
2368 DC395x_read8(acb, TRM_S1040_DMA_STATUS);
2369 } while (!(TempDMAstatus & DMAXFERCOMP) && --ctr);
2370 if (!ctr)
2371 dprintkl(KERN_ERR,
2372 "Deadlock in DataInPhase0 waiting for DMA!!\n");
2373 srb->total_xfer_length = 0;
2374 #endif
2375 srb->total_xfer_length = d_left_counter;
2376 } else { /* phase changed */
2377 /*
2378 * parsing the case:
2379 * when a transfer not yet complete
2380 * but be disconnected by target
2381 * if transfer not yet complete
2382 * there were some data residue in SCSI FIFO or
2383 * SCSI transfer counter not empty
2384 */
2385 sg_update_list(srb, d_left_counter);
2386 }
2387 }
2388 /* KG: The target may decide to disconnect: Empty FIFO before! */
2389 if ((*pscsi_status & PHASEMASK) != PH_DATA_IN) {
2390 cleanup_after_transfer(acb, srb);
2391 }
2392 }
2393
2394
2395 static void data_in_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2396 u16 *pscsi_status)
2397 {
2398 dprintkdbg(DBG_0, "data_in_phase1: (0x%p) <%02i-%i>\n",
2399 srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
2400 data_io_transfer(acb, srb, XFERDATAIN);
2401 }
2402
2403
2404 static void data_io_transfer(struct AdapterCtlBlk *acb,
2405 struct ScsiReqBlk *srb, u16 io_dir)
2406 {
2407 struct DeviceCtlBlk *dcb = srb->dcb;
2408 u8 bval;
2409 dprintkdbg(DBG_0,
2410 "data_io_transfer: (0x%p) <%02i-%i> %c len=%i, sg=(%i/%i)\n",
2411 srb->cmd, srb->cmd->device->id, srb->cmd->device->lun,
2412 ((io_dir & DMACMD_DIR) ? 'r' : 'w'),
2413 srb->total_xfer_length, srb->sg_index, srb->sg_count);
2414 if (srb == acb->tmp_srb)
2415 dprintkl(KERN_ERR, "data_io_transfer: Using tmp_srb!\n");
2416 if (srb->sg_index >= srb->sg_count) {
2417 /* can't happen? out of bounds error */
2418 return;
2419 }
2420
2421 if (srb->total_xfer_length > DC395x_LASTPIO) {
2422 u8 dma_status = DC395x_read8(acb, TRM_S1040_DMA_STATUS);
2423 /*
2424 * KG: What should we do: Use SCSI Cmd 0x90/0x92?
2425 * Maybe, even ABORTXFER would be appropriate
2426 */
2427 if (dma_status & XFERPENDING) {
2428 dprintkl(KERN_DEBUG, "data_io_transfer: Xfer pending! "
2429 "Expect trouble!\n");
2430 dump_register_info(acb, dcb, srb);
2431 DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
2432 }
2433 /* clear_fifo(acb, "IO"); */
2434 /*
2435 * load what physical address of Scatter/Gather list table
2436 * want to be transfer
2437 */
2438 srb->state |= SRB_DATA_XFER;
2439 DC395x_write32(acb, TRM_S1040_DMA_XHIGHADDR, 0);
2440 if (scsi_sg_count(srb->cmd)) { /* with S/G */
2441 io_dir |= DMACMD_SG;
2442 DC395x_write32(acb, TRM_S1040_DMA_XLOWADDR,
2443 srb->sg_bus_addr +
2444 sizeof(struct SGentry) *
2445 srb->sg_index);
2446 /* load how many bytes in the sg list table */
2447 DC395x_write32(acb, TRM_S1040_DMA_XCNT,
2448 ((u32)(srb->sg_count -
2449 srb->sg_index) << 3));
2450 } else { /* without S/G */
2451 io_dir &= ~DMACMD_SG;
2452 DC395x_write32(acb, TRM_S1040_DMA_XLOWADDR,
2453 srb->segment_x[0].address);
2454 DC395x_write32(acb, TRM_S1040_DMA_XCNT,
2455 srb->segment_x[0].length);
2456 }
2457 /* load total transfer length (24bits) max value 16Mbyte */
2458 DC395x_write32(acb, TRM_S1040_SCSI_COUNTER,
2459 srb->total_xfer_length);
2460 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
2461 if (io_dir & DMACMD_DIR) { /* read */
2462 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND,
2463 SCMD_DMA_IN);
2464 DC395x_write16(acb, TRM_S1040_DMA_COMMAND, io_dir);
2465 } else {
2466 DC395x_write16(acb, TRM_S1040_DMA_COMMAND, io_dir);
2467 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND,
2468 SCMD_DMA_OUT);
2469 }
2470
2471 }
2472 #if DC395x_LASTPIO
2473 else if (srb->total_xfer_length > 0) { /* The last four bytes: Do PIO */
2474 /*
2475 * load what physical address of Scatter/Gather list table
2476 * want to be transfer
2477 */
2478 srb->state |= SRB_DATA_XFER;
2479 /* load total transfer length (24bits) max value 16Mbyte */
2480 DC395x_write32(acb, TRM_S1040_SCSI_COUNTER,
2481 srb->total_xfer_length);
2482 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
2483 if (io_dir & DMACMD_DIR) { /* read */
2484 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND,
2485 SCMD_FIFO_IN);
2486 } else { /* write */
2487 int ln = srb->total_xfer_length;
2488 size_t left_io = srb->total_xfer_length;
2489
2490 if (srb->dcb->sync_period & WIDE_SYNC)
2491 DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2,
2492 CFG2_WIDEFIFO);
2493
2494 while (left_io) {
2495 unsigned char *virt, *base = NULL;
2496 unsigned long flags = 0;
2497 size_t len = left_io;
2498 size_t offset = srb->request_length - left_io;
2499
2500 local_irq_save(flags);
2501 /* Again, max 4 bytes */
2502 base = scsi_kmap_atomic_sg(scsi_sglist(srb->cmd),
2503 srb->sg_count, &offset, &len);
2504 virt = base + offset;
2505
2506 left_io -= len;
2507
2508 while (len--) {
2509 if (debug_enabled(DBG_PIO))
2510 printk(" %02x", *virt);
2511
2512 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *virt++);
2513
2514 sg_subtract_one(srb);
2515 }
2516
2517 scsi_kunmap_atomic_sg(base);
2518 local_irq_restore(flags);
2519 }
2520 if (srb->dcb->sync_period & WIDE_SYNC) {
2521 if (ln % 2) {
2522 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
2523 if (debug_enabled(DBG_PIO))
2524 printk(" |00");
2525 }
2526 DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2, 0);
2527 }
2528 /*DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, ln); */
2529 if (debug_enabled(DBG_PIO))
2530 printk("\n");
2531 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND,
2532 SCMD_FIFO_OUT);
2533 }
2534 }
2535 #endif /* DC395x_LASTPIO */
2536 else { /* xfer pad */
2537 u8 data = 0, data2 = 0;
2538 if (srb->sg_count) {
2539 srb->adapter_status = H_OVER_UNDER_RUN;
2540 srb->status |= OVER_RUN;
2541 }
2542 /*
2543 * KG: despite the fact that we are using 16 bits I/O ops
2544 * the SCSI FIFO is only 8 bits according to the docs
2545 * (we can set bit 1 in 0x8f to serialize FIFO access ...)
2546 */
2547 if (dcb->sync_period & WIDE_SYNC) {
2548 DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, 2);
2549 DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2,
2550 CFG2_WIDEFIFO);
2551 if (io_dir & DMACMD_DIR) {
2552 data = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
2553 data2 = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
2554 } else {
2555 /* Danger, Robinson: If you find KGs
2556 * scattered over the wide disk, the driver
2557 * or chip is to blame :-( */
2558 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 'K');
2559 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 'G');
2560 }
2561 DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2, 0);
2562 } else {
2563 DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, 1);
2564 /* Danger, Robinson: If you find a collection of Ks on your disk
2565 * something broke :-( */
2566 if (io_dir & DMACMD_DIR)
2567 data = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
2568 else
2569 DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 'K');
2570 }
2571 srb->state |= SRB_XFERPAD;
2572 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
2573 /* SCSI command */
2574 bval = (io_dir & DMACMD_DIR) ? SCMD_FIFO_IN : SCMD_FIFO_OUT;
2575 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, bval);
2576 }
2577 }
2578
2579
2580 static void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2581 u16 *pscsi_status)
2582 {
2583 dprintkdbg(DBG_0, "status_phase0: (0x%p) <%02i-%i>\n",
2584 srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
2585 srb->target_status = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
2586 srb->end_message = DC395x_read8(acb, TRM_S1040_SCSI_FIFO); /* get message */
2587 srb->state = SRB_COMPLETED;
2588 *pscsi_status = PH_BUS_FREE; /*.. initial phase */
2589 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
2590 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_MSGACCEPT);
2591 }
2592
2593
2594 static void status_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2595 u16 *pscsi_status)
2596 {
2597 dprintkdbg(DBG_0, "status_phase1: (0x%p) <%02i-%i>\n",
2598 srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
2599 srb->state = SRB_STATUS;
2600 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
2601 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_COMP);
2602 }
2603
2604
2605 /* Check if the message is complete */
2606 static inline u8 msgin_completed(u8 * msgbuf, u32 len)
2607 {
2608 if (*msgbuf == EXTENDED_MESSAGE) {
2609 if (len < 2)
2610 return 0;
2611 if (len < msgbuf[1] + 2)
2612 return 0;
2613 } else if (*msgbuf >= 0x20 && *msgbuf <= 0x2f) /* two byte messages */
2614 if (len < 2)
2615 return 0;
2616 return 1;
2617 }
2618
2619 /* reject_msg */
2620 static inline void msgin_reject(struct AdapterCtlBlk *acb,
2621 struct ScsiReqBlk *srb)
2622 {
2623 srb->msgout_buf[0] = MESSAGE_REJECT;
2624 srb->msg_count = 1;
2625 DC395x_ENABLE_MSGOUT;
2626 srb->state &= ~SRB_MSGIN;
2627 srb->state |= SRB_MSGOUT;
2628 dprintkl(KERN_INFO, "msgin_reject: 0x%02x <%02i-%i>\n",
2629 srb->msgin_buf[0],
2630 srb->dcb->target_id, srb->dcb->target_lun);
2631 }
2632
2633
2634 static struct ScsiReqBlk *msgin_qtag(struct AdapterCtlBlk *acb,
2635 struct DeviceCtlBlk *dcb, u8 tag)
2636 {
2637 struct ScsiReqBlk *srb = NULL;
2638 struct ScsiReqBlk *i;
2639 dprintkdbg(DBG_0, "msgin_qtag: (0x%p) tag=%i srb=%p\n",
2640 srb->cmd, tag, srb);
2641
2642 if (!(dcb->tag_mask & (1 << tag)))
2643 dprintkl(KERN_DEBUG,
2644 "msgin_qtag: tag_mask=0x%08x does not reserve tag %i!\n",
2645 dcb->tag_mask, tag);
2646
2647 if (list_empty(&dcb->srb_going_list))
2648 goto mingx0;
2649 list_for_each_entry(i, &dcb->srb_going_list, list) {
2650 if (i->tag_number == tag) {
2651 srb = i;
2652 break;
2653 }
2654 }
2655 if (!srb)
2656 goto mingx0;
2657
2658 dprintkdbg(DBG_0, "msgin_qtag: (0x%p) <%02i-%i>\n",
2659 srb->cmd, srb->dcb->target_id, srb->dcb->target_lun);
2660 if (dcb->flag & ABORT_DEV_) {
2661 /*srb->state = SRB_ABORT_SENT; */
2662 enable_msgout_abort(acb, srb);
2663 }
2664
2665 if (!(srb->state & SRB_DISCONNECT))
2666 goto mingx0;
2667
2668 memcpy(srb->msgin_buf, dcb->active_srb->msgin_buf, acb->msg_len);
2669 srb->state |= dcb->active_srb->state;
2670 srb->state |= SRB_DATA_XFER;
2671 dcb->active_srb = srb;
2672 /* How can we make the DORS happy? */
2673 return srb;
2674
2675 mingx0:
2676 srb = acb->tmp_srb;
2677 srb->state = SRB_UNEXPECT_RESEL;
2678 dcb->active_srb = srb;
2679 srb->msgout_buf[0] = MSG_ABORT_TAG;
2680 srb->msg_count = 1;
2681 DC395x_ENABLE_MSGOUT;
2682 dprintkl(KERN_DEBUG, "msgin_qtag: Unknown tag %i - abort\n", tag);
2683 return srb;
2684 }
2685
2686
2687 static inline void reprogram_regs(struct AdapterCtlBlk *acb,
2688 struct DeviceCtlBlk *dcb)
2689 {
2690 DC395x_write8(acb, TRM_S1040_SCSI_TARGETID, dcb->target_id);
2691 DC395x_write8(acb, TRM_S1040_SCSI_SYNC, dcb->sync_period);
2692 DC395x_write8(acb, TRM_S1040_SCSI_OFFSET, dcb->sync_offset);
2693 set_xfer_rate(acb, dcb);
2694 }
2695
2696
2697 /* set async transfer mode */
2698 static void msgin_set_async(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
2699 {
2700 struct DeviceCtlBlk *dcb = srb->dcb;
2701 dprintkl(KERN_DEBUG, "msgin_set_async: No sync transfers <%02i-%i>\n",
2702 dcb->target_id, dcb->target_lun);
2703
2704 dcb->sync_mode &= ~(SYNC_NEGO_ENABLE);
2705 dcb->sync_mode |= SYNC_NEGO_DONE;
2706 /*dcb->sync_period &= 0; */
2707 dcb->sync_offset = 0;
2708 dcb->min_nego_period = 200 >> 2; /* 200ns <=> 5 MHz */
2709 srb->state &= ~SRB_DO_SYNC_NEGO;
2710 reprogram_regs(acb, dcb);
2711 if ((dcb->sync_mode & WIDE_NEGO_ENABLE)
2712 && !(dcb->sync_mode & WIDE_NEGO_DONE)) {
2713 build_wdtr(acb, dcb, srb);
2714 DC395x_ENABLE_MSGOUT;
2715 dprintkdbg(DBG_0, "msgin_set_async(rej): Try WDTR anyway\n");
2716 }
2717 }
2718
2719
2720 /* set sync transfer mode */
2721 static void msgin_set_sync(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
2722 {
2723 struct DeviceCtlBlk *dcb = srb->dcb;
2724 u8 bval;
2725 int fact;
2726 dprintkdbg(DBG_1, "msgin_set_sync: <%02i> Sync: %ins "
2727 "(%02i.%01i MHz) Offset %i\n",
2728 dcb->target_id, srb->msgin_buf[3] << 2,
2729 (250 / srb->msgin_buf[3]),
2730 ((250 % srb->msgin_buf[3]) * 10) / srb->msgin_buf[3],
2731 srb->msgin_buf[4]);
2732
2733 if (srb->msgin_buf[4] > 15)
2734 srb->msgin_buf[4] = 15;
2735 if (!(dcb->dev_mode & NTC_DO_SYNC_NEGO))
2736 dcb->sync_offset = 0;
2737 else if (dcb->sync_offset == 0)
2738 dcb->sync_offset = srb->msgin_buf[4];
2739 if (srb->msgin_buf[4] > dcb->sync_offset)
2740 srb->msgin_buf[4] = dcb->sync_offset;
2741 else
2742 dcb->sync_offset = srb->msgin_buf[4];
2743 bval = 0;
2744 while (bval < 7 && (srb->msgin_buf[3] > clock_period[bval]
2745 || dcb->min_nego_period >
2746 clock_period[bval]))
2747 bval++;
2748 if (srb->msgin_buf[3] < clock_period[bval])
2749 dprintkl(KERN_INFO,
2750 "msgin_set_sync: Increase sync nego period to %ins\n",
2751 clock_period[bval] << 2);
2752 srb->msgin_buf[3] = clock_period[bval];
2753 dcb->sync_period &= 0xf0;
2754 dcb->sync_period |= ALT_SYNC | bval;
2755 dcb->min_nego_period = srb->msgin_buf[3];
2756
2757 if (dcb->sync_period & WIDE_SYNC)
2758 fact = 500;
2759 else
2760 fact = 250;
2761
2762 dprintkl(KERN_INFO,
2763 "Target %02i: %s Sync: %ins Offset %i (%02i.%01i MB/s)\n",
2764 dcb->target_id, (fact == 500) ? "Wide16" : "",
2765 dcb->min_nego_period << 2, dcb->sync_offset,
2766 (fact / dcb->min_nego_period),
2767 ((fact % dcb->min_nego_period) * 10 +
2768 dcb->min_nego_period / 2) / dcb->min_nego_period);
2769
2770 if (!(srb->state & SRB_DO_SYNC_NEGO)) {
2771 /* Reply with corrected SDTR Message */
2772 dprintkl(KERN_DEBUG, "msgin_set_sync: answer w/%ins %i\n",
2773 srb->msgin_buf[3] << 2, srb->msgin_buf[4]);
2774
2775 memcpy(srb->msgout_buf, srb->msgin_buf, 5);
2776 srb->msg_count = 5;
2777 DC395x_ENABLE_MSGOUT;
2778 dcb->sync_mode |= SYNC_NEGO_DONE;
2779 } else {
2780 if ((dcb->sync_mode & WIDE_NEGO_ENABLE)
2781 && !(dcb->sync_mode & WIDE_NEGO_DONE)) {
2782 build_wdtr(acb, dcb, srb);
2783 DC395x_ENABLE_MSGOUT;
2784 dprintkdbg(DBG_0, "msgin_set_sync: Also try WDTR\n");
2785 }
2786 }
2787 srb->state &= ~SRB_DO_SYNC_NEGO;
2788 dcb->sync_mode |= SYNC_NEGO_DONE | SYNC_NEGO_ENABLE;
2789
2790 reprogram_regs(acb, dcb);
2791 }
2792
2793
2794 static inline void msgin_set_nowide(struct AdapterCtlBlk *acb,
2795 struct ScsiReqBlk *srb)
2796 {
2797 struct DeviceCtlBlk *dcb = srb->dcb;
2798 dprintkdbg(DBG_1, "msgin_set_nowide: <%02i>\n", dcb->target_id);
2799
2800 dcb->sync_period &= ~WIDE_SYNC;
2801 dcb->sync_mode &= ~(WIDE_NEGO_ENABLE);
2802 dcb->sync_mode |= WIDE_NEGO_DONE;
2803 srb->state &= ~SRB_DO_WIDE_NEGO;
2804 reprogram_regs(acb, dcb);
2805 if ((dcb->sync_mode & SYNC_NEGO_ENABLE)
2806 && !(dcb->sync_mode & SYNC_NEGO_DONE)) {
2807 build_sdtr(acb, dcb, srb);
2808 DC395x_ENABLE_MSGOUT;
2809 dprintkdbg(DBG_0, "msgin_set_nowide: Rejected. Try SDTR anyway\n");
2810 }
2811 }
2812
2813 static void msgin_set_wide(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
2814 {
2815 struct DeviceCtlBlk *dcb = srb->dcb;
2816 u8 wide = (dcb->dev_mode & NTC_DO_WIDE_NEGO
2817 && acb->config & HCC_WIDE_CARD) ? 1 : 0;
2818 dprintkdbg(DBG_1, "msgin_set_wide: <%02i>\n", dcb->target_id);
2819
2820 if (srb->msgin_buf[3] > wide)
2821 srb->msgin_buf[3] = wide;
2822 /* Completed */
2823 if (!(srb->state & SRB_DO_WIDE_NEGO)) {
2824 dprintkl(KERN_DEBUG,
2825 "msgin_set_wide: Wide nego initiated <%02i>\n",
2826 dcb->target_id);
2827 memcpy(srb->msgout_buf, srb->msgin_buf, 4);
2828 srb->msg_count = 4;
2829 srb->state |= SRB_DO_WIDE_NEGO;
2830 DC395x_ENABLE_MSGOUT;
2831 }
2832
2833 dcb->sync_mode |= (WIDE_NEGO_ENABLE | WIDE_NEGO_DONE);
2834 if (srb->msgin_buf[3] > 0)
2835 dcb->sync_period |= WIDE_SYNC;
2836 else
2837 dcb->sync_period &= ~WIDE_SYNC;
2838 srb->state &= ~SRB_DO_WIDE_NEGO;
2839 /*dcb->sync_mode &= ~(WIDE_NEGO_ENABLE+WIDE_NEGO_DONE); */
2840 dprintkdbg(DBG_1,
2841 "msgin_set_wide: Wide (%i bit) negotiated <%02i>\n",
2842 (8 << srb->msgin_buf[3]), dcb->target_id);
2843 reprogram_regs(acb, dcb);
2844 if ((dcb->sync_mode & SYNC_NEGO_ENABLE)
2845 && !(dcb->sync_mode & SYNC_NEGO_DONE)) {
2846 build_sdtr(acb, dcb, srb);
2847 DC395x_ENABLE_MSGOUT;
2848 dprintkdbg(DBG_0, "msgin_set_wide: Also try SDTR.\n");
2849 }
2850 }
2851
2852
2853 /*
2854 * extended message codes:
2855 *
2856 * code description
2857 *
2858 * 02h Reserved
2859 * 00h MODIFY DATA POINTER
2860 * 01h SYNCHRONOUS DATA TRANSFER REQUEST
2861 * 03h WIDE DATA TRANSFER REQUEST
2862 * 04h - 7Fh Reserved
2863 * 80h - FFh Vendor specific
2864 */
2865 static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2866 u16 *pscsi_status)
2867 {
2868 struct DeviceCtlBlk *dcb = acb->active_dcb;
2869 dprintkdbg(DBG_0, "msgin_phase0: (0x%p)\n", srb->cmd);
2870
2871 srb->msgin_buf[acb->msg_len++] = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
2872 if (msgin_completed(srb->msgin_buf, acb->msg_len)) {
2873 /* Now eval the msg */
2874 switch (srb->msgin_buf[0]) {
2875 case DISCONNECT:
2876 srb->state = SRB_DISCONNECT;
2877 break;
2878
2879 case SIMPLE_QUEUE_TAG:
2880 case HEAD_OF_QUEUE_TAG:
2881 case ORDERED_QUEUE_TAG:
2882 srb =
2883 msgin_qtag(acb, dcb,
2884 srb->msgin_buf[1]);
2885 break;
2886
2887 case MESSAGE_REJECT:
2888 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
2889 DO_CLRATN | DO_DATALATCH);
2890 /* A sync nego message was rejected ! */
2891 if (srb->state & SRB_DO_SYNC_NEGO) {
2892 msgin_set_async(acb, srb);
2893 break;
2894 }
2895 /* A wide nego message was rejected ! */
2896 if (srb->state & SRB_DO_WIDE_NEGO) {
2897 msgin_set_nowide(acb, srb);
2898 break;
2899 }
2900 enable_msgout_abort(acb, srb);
2901 /*srb->state |= SRB_ABORT_SENT */
2902 break;
2903
2904 case EXTENDED_MESSAGE:
2905 /* SDTR */
2906 if (srb->msgin_buf[1] == 3
2907 && srb->msgin_buf[2] == EXTENDED_SDTR) {
2908 msgin_set_sync(acb, srb);
2909 break;
2910 }
2911 /* WDTR */
2912 if (srb->msgin_buf[1] == 2
2913 && srb->msgin_buf[2] == EXTENDED_WDTR
2914 && srb->msgin_buf[3] <= 2) { /* sanity check ... */
2915 msgin_set_wide(acb, srb);
2916 break;
2917 }
2918 msgin_reject(acb, srb);
2919 break;
2920
2921 case MSG_IGNOREWIDE:
2922 /* Discard wide residual */
2923 dprintkdbg(DBG_0, "msgin_phase0: Ignore Wide Residual!\n");
2924 break;
2925
2926 case COMMAND_COMPLETE:
2927 /* nothing has to be done */
2928 break;
2929
2930 case SAVE_POINTERS:
2931 /*
2932 * SAVE POINTER may be ignored as we have the struct
2933 * ScsiReqBlk* associated with the scsi command.
2934 */
2935 dprintkdbg(DBG_0, "msgin_phase0: (0x%p) "
2936 "SAVE POINTER rem=%i Ignore\n",
2937 srb->cmd, srb->total_xfer_length);
2938 break;
2939
2940 case RESTORE_POINTERS:
2941 dprintkdbg(DBG_0, "msgin_phase0: RESTORE POINTER. Ignore\n");
2942 break;
2943
2944 case ABORT:
2945 dprintkdbg(DBG_0, "msgin_phase0: (0x%p) "
2946 "<%02i-%i> ABORT msg\n",
2947 srb->cmd, dcb->target_id,
2948 dcb->target_lun);
2949 dcb->flag |= ABORT_DEV_;
2950 enable_msgout_abort(acb, srb);
2951 break;
2952
2953 default:
2954 /* reject unknown messages */
2955 if (srb->msgin_buf[0] & IDENTIFY_BASE) {
2956 dprintkdbg(DBG_0, "msgin_phase0: Identify msg\n");
2957 srb->msg_count = 1;
2958 srb->msgout_buf[0] = dcb->identify_msg;
2959 DC395x_ENABLE_MSGOUT;
2960 srb->state |= SRB_MSGOUT;
2961 /*break; */
2962 }
2963 msgin_reject(acb, srb);
2964 }
2965
2966 /* Clear counter and MsgIn state */
2967 srb->state &= ~SRB_MSGIN;
2968 acb->msg_len = 0;
2969 }
2970 *pscsi_status = PH_BUS_FREE;
2971 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important ... you know! */
2972 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_MSGACCEPT);
2973 }
2974
2975
2976 static void msgin_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2977 u16 *pscsi_status)
2978 {
2979 dprintkdbg(DBG_0, "msgin_phase1: (0x%p)\n", srb->cmd);
2980 clear_fifo(acb, "msgin_phase1");
2981 DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, 1);
2982 if (!(srb->state & SRB_MSGIN)) {
2983 srb->state &= ~SRB_DISCONNECT;
2984 srb->state |= SRB_MSGIN;
2985 }
2986 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
2987 /* SCSI command */
2988 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_IN);
2989 }
2990
2991
2992 static void nop0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2993 u16 *pscsi_status)
2994 {
2995 }
2996
2997
2998 static void nop1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
2999 u16 *pscsi_status)
3000 {
3001 }
3002
3003
3004 static void set_xfer_rate(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb)
3005 {
3006 struct DeviceCtlBlk *i;
3007
3008 /* set all lun device's period, offset */
3009 if (dcb->identify_msg & 0x07)
3010 return;
3011
3012 if (acb->scan_devices) {
3013 current_sync_offset = dcb->sync_offset;
3014 return;
3015 }
3016
3017 list_for_each_entry(i, &acb->dcb_list, list)
3018 if (i->target_id == dcb->target_id) {
3019 i->sync_period = dcb->sync_period;
3020 i->sync_offset = dcb->sync_offset;
3021 i->sync_mode = dcb->sync_mode;
3022 i->min_nego_period = dcb->min_nego_period;
3023 }
3024 }
3025
3026
3027 static void disconnect(struct AdapterCtlBlk *acb)
3028 {
3029 struct DeviceCtlBlk *dcb = acb->active_dcb;
3030 struct ScsiReqBlk *srb;
3031
3032 if (!dcb) {
3033 dprintkl(KERN_ERR, "disconnect: No such device\n");
3034 udelay(500);
3035 /* Suspend queue for a while */
3036 acb->last_reset =
3037 jiffies + HZ / 2 +
3038 HZ * acb->eeprom.delay_time;
3039 clear_fifo(acb, "disconnectEx");
3040 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT);
3041 return;
3042 }
3043 srb = dcb->active_srb;
3044 acb->active_dcb = NULL;
3045 dprintkdbg(DBG_0, "disconnect: (0x%p)\n", srb->cmd);
3046
3047 srb->scsi_phase = PH_BUS_FREE; /* initial phase */
3048 clear_fifo(acb, "disconnect");
3049 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT);
3050 if (srb->state & SRB_UNEXPECT_RESEL) {
3051 dprintkl(KERN_ERR,
3052 "disconnect: Unexpected reselection <%02i-%i>\n",
3053 dcb->target_id, dcb->target_lun);
3054 srb->state = 0;
3055 waiting_process_next(acb);
3056 } else if (srb->state & SRB_ABORT_SENT) {
3057 dcb->flag &= ~ABORT_DEV_;
3058 acb->last_reset = jiffies + HZ / 2 + 1;
3059 dprintkl(KERN_ERR, "disconnect: SRB_ABORT_SENT\n");
3060 doing_srb_done(acb, DID_ABORT, srb->cmd, 1);
3061 waiting_process_next(acb);
3062 } else {
3063 if ((srb->state & (SRB_START_ + SRB_MSGOUT))
3064 || !(srb->
3065 state & (SRB_DISCONNECT + SRB_COMPLETED))) {
3066 /*
3067 * Selection time out
3068 * SRB_START_ || SRB_MSGOUT || (!SRB_DISCONNECT && !SRB_COMPLETED)
3069 */
3070 /* Unexp. Disc / Sel Timeout */
3071 if (srb->state != SRB_START_
3072 && srb->state != SRB_MSGOUT) {
3073 srb->state = SRB_READY;
3074 dprintkl(KERN_DEBUG,
3075 "disconnect: (0x%p) Unexpected\n",
3076 srb->cmd);
3077 srb->target_status = SCSI_STAT_SEL_TIMEOUT;
3078 goto disc1;
3079 } else {
3080 /* Normal selection timeout */
3081 dprintkdbg(DBG_KG, "disconnect: (0x%p) "
3082 "<%02i-%i> SelTO\n", srb->cmd,
3083 dcb->target_id, dcb->target_lun);
3084 if (srb->retry_count++ > DC395x_MAX_RETRIES
3085 || acb->scan_devices) {
3086 srb->target_status =
3087 SCSI_STAT_SEL_TIMEOUT;
3088 goto disc1;
3089 }
3090 free_tag(dcb, srb);
3091 srb_going_to_waiting_move(dcb, srb);
3092 dprintkdbg(DBG_KG,
3093 "disconnect: (0x%p) Retry\n",
3094 srb->cmd);
3095 waiting_set_timer(acb, HZ / 20);
3096 }
3097 } else if (srb->state & SRB_DISCONNECT) {
3098 u8 bval = DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL);
3099 /*
3100 * SRB_DISCONNECT (This is what we expect!)
3101 */
3102 if (bval & 0x40) {
3103 dprintkdbg(DBG_0, "disconnect: SCSI bus stat "
3104 " 0x%02x: ACK set! Other controllers?\n",
3105 bval);
3106 /* It could come from another initiator, therefore don't do much ! */
3107 } else
3108 waiting_process_next(acb);
3109 } else if (srb->state & SRB_COMPLETED) {
3110 disc1:
3111 /*
3112 ** SRB_COMPLETED
3113 */
3114 free_tag(dcb, srb);
3115 dcb->active_srb = NULL;
3116 srb->state = SRB_FREE;
3117 srb_done(acb, dcb, srb);
3118 }
3119 }
3120 }
3121
3122
3123 static void reselect(struct AdapterCtlBlk *acb)
3124 {
3125 struct DeviceCtlBlk *dcb = acb->active_dcb;
3126 struct ScsiReqBlk *srb = NULL;
3127 u16 rsel_tar_lun_id;
3128 u8 id, lun;
3129 u8 arblostflag = 0;
3130 dprintkdbg(DBG_0, "reselect: acb=%p\n", acb);
3131
3132 clear_fifo(acb, "reselect");
3133 /*DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT | DO_DATALATCH); */
3134 /* Read Reselected Target ID and LUN */
3135 rsel_tar_lun_id = DC395x_read16(acb, TRM_S1040_SCSI_TARGETID);
3136 if (dcb) { /* Arbitration lost but Reselection win */
3137 srb = dcb->active_srb;
3138 if (!srb) {
3139 dprintkl(KERN_DEBUG, "reselect: Arb lost Resel won, "
3140 "but active_srb == NULL\n");
3141 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
3142 return;
3143 }
3144 /* Why the if ? */
3145 if (!acb->scan_devices) {
3146 dprintkdbg(DBG_KG, "reselect: (0x%p) <%02i-%i> "
3147 "Arb lost but Resel win rsel=%i stat=0x%04x\n",
3148 srb->cmd, dcb->target_id,
3149 dcb->target_lun, rsel_tar_lun_id,
3150 DC395x_read16(acb, TRM_S1040_SCSI_STATUS));
3151 arblostflag = 1;
3152 /*srb->state |= SRB_DISCONNECT; */
3153
3154 srb->state = SRB_READY;
3155 free_tag(dcb, srb);
3156 srb_going_to_waiting_move(dcb, srb);
3157 waiting_set_timer(acb, HZ / 20);
3158
3159 /* return; */
3160 }
3161 }
3162 /* Read Reselected Target Id and LUN */
3163 if (!(rsel_tar_lun_id & (IDENTIFY_BASE << 8)))
3164 dprintkl(KERN_DEBUG, "reselect: Expects identify msg. "
3165 "Got %i!\n", rsel_tar_lun_id);
3166 id = rsel_tar_lun_id & 0xff;
3167 lun = (rsel_tar_lun_id >> 8) & 7;
3168 dcb = find_dcb(acb, id, lun);
3169 if (!dcb) {
3170 dprintkl(KERN_ERR, "reselect: From non existent device "
3171 "<%02i-%i>\n", id, lun);
3172 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
3173 return;
3174 }
3175 acb->active_dcb = dcb;
3176
3177 if (!(dcb->dev_mode & NTC_DO_DISCONNECT))
3178 dprintkl(KERN_DEBUG, "reselect: in spite of forbidden "
3179 "disconnection? <%02i-%i>\n",
3180 dcb->target_id, dcb->target_lun);
3181
3182 if (dcb->sync_mode & EN_TAG_QUEUEING /*&& !arblostflag */) {
3183 srb = acb->tmp_srb;
3184 dcb->active_srb = srb;
3185 } else {
3186 /* There can be only one! */
3187 srb = dcb->active_srb;
3188 if (!srb || !(srb->state & SRB_DISCONNECT)) {
3189 /*
3190 * abort command
3191 */
3192 dprintkl(KERN_DEBUG,
3193 "reselect: w/o disconnected cmds <%02i-%i>\n",
3194 dcb->target_id, dcb->target_lun);
3195 srb = acb->tmp_srb;
3196 srb->state = SRB_UNEXPECT_RESEL;
3197 dcb->active_srb = srb;
3198 enable_msgout_abort(acb, srb);
3199 } else {
3200 if (dcb->flag & ABORT_DEV_) {
3201 /*srb->state = SRB_ABORT_SENT; */
3202 enable_msgout_abort(acb, srb);
3203 } else
3204 srb->state = SRB_DATA_XFER;
3205
3206 }
3207 }
3208 srb->scsi_phase = PH_BUS_FREE; /* initial phase */
3209
3210 /* Program HA ID, target ID, period and offset */
3211 dprintkdbg(DBG_0, "reselect: select <%i>\n", dcb->target_id);
3212 DC395x_write8(acb, TRM_S1040_SCSI_HOSTID, acb->scsi_host->this_id); /* host ID */
3213 DC395x_write8(acb, TRM_S1040_SCSI_TARGETID, dcb->target_id); /* target ID */
3214 DC395x_write8(acb, TRM_S1040_SCSI_OFFSET, dcb->sync_offset); /* offset */
3215 DC395x_write8(acb, TRM_S1040_SCSI_SYNC, dcb->sync_period); /* sync period, wide */
3216 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
3217 /* SCSI command */
3218 DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_MSGACCEPT);
3219 }
3220
3221
3222 static inline u8 tagq_blacklist(char *name)
3223 {
3224 #ifndef DC395x_NO_TAGQ
3225 #if 0
3226 u8 i;
3227 for (i = 0; i < BADDEVCNT; i++)
3228 if (memcmp(name, DC395x_baddevname1[i], 28) == 0)
3229 return 1;
3230 #endif
3231 return 0;
3232 #else
3233 return 1;
3234 #endif
3235 }
3236
3237
3238 static void disc_tagq_set(struct DeviceCtlBlk *dcb, struct ScsiInqData *ptr)
3239 {
3240 /* Check for SCSI format (ANSI and Response data format) */
3241 if ((ptr->Vers & 0x07) >= 2 || (ptr->RDF & 0x0F) == 2) {
3242 if ((ptr->Flags & SCSI_INQ_CMDQUEUE)
3243 && (dcb->dev_mode & NTC_DO_TAG_QUEUEING) &&
3244 /*(dcb->dev_mode & NTC_DO_DISCONNECT) */
3245 /* ((dcb->dev_type == TYPE_DISK)
3246 || (dcb->dev_type == TYPE_MOD)) && */
3247 !tagq_blacklist(((char *)ptr) + 8)) {
3248 if (dcb->max_command == 1)
3249 dcb->max_command =
3250 dcb->acb->tag_max_num;
3251 dcb->sync_mode |= EN_TAG_QUEUEING;
3252 /*dcb->tag_mask = 0; */
3253 } else
3254 dcb->max_command = 1;
3255 }
3256 }
3257
3258
3259 static void add_dev(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
3260 struct ScsiInqData *ptr)
3261 {
3262 u8 bval1 = ptr->DevType & SCSI_DEVTYPE;
3263 dcb->dev_type = bval1;
3264 /* if (bval1 == TYPE_DISK || bval1 == TYPE_MOD) */
3265 disc_tagq_set(dcb, ptr);
3266 }
3267
3268
3269 /* unmap mapped pci regions from SRB */
3270 static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
3271 {
3272 struct scsi_cmnd *cmd = srb->cmd;
3273 enum dma_data_direction dir = cmd->sc_data_direction;
3274
3275 if (scsi_sg_count(cmd) && dir != PCI_DMA_NONE) {
3276 /* unmap DC395x SG list */
3277 dprintkdbg(DBG_SG, "pci_unmap_srb: list=%08x(%05x)\n",
3278 srb->sg_bus_addr, SEGMENTX_LEN);
3279 pci_unmap_single(acb->dev, srb->sg_bus_addr,
3280 SEGMENTX_LEN,
3281 PCI_DMA_TODEVICE);
3282 dprintkdbg(DBG_SG, "pci_unmap_srb: segs=%i buffer=%p\n",
3283 scsi_sg_count(cmd), scsi_bufflen(cmd));
3284 /* unmap the sg segments */
3285 scsi_dma_unmap(cmd);
3286 }
3287 }
3288
3289
3290 /* unmap mapped pci sense buffer from SRB */
3291 static void pci_unmap_srb_sense(struct AdapterCtlBlk *acb,
3292 struct ScsiReqBlk *srb)
3293 {
3294 if (!(srb->flag & AUTO_REQSENSE))
3295 return;
3296 /* Unmap sense buffer */
3297 dprintkdbg(DBG_SG, "pci_unmap_srb_sense: buffer=%08x\n",
3298 srb->segment_x[0].address);
3299 pci_unmap_single(acb->dev, srb->segment_x[0].address,
3300 srb->segment_x[0].length, PCI_DMA_FROMDEVICE);
3301 /* Restore SG stuff */
3302 srb->total_xfer_length = srb->xferred;
3303 srb->segment_x[0].address =
3304 srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].address;
3305 srb->segment_x[0].length =
3306 srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].length;
3307 }
3308
3309
3310 /*
3311 * Complete execution of a SCSI command
3312 * Signal completion to the generic SCSI driver
3313 */
3314 static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
3315 struct ScsiReqBlk *srb)
3316 {
3317 u8 tempcnt, status;
3318 struct scsi_cmnd *cmd = srb->cmd;
3319 enum dma_data_direction dir = cmd->sc_data_direction;
3320 int ckc_only = 1;
3321
3322 dprintkdbg(DBG_1, "srb_done: (0x%p) <%02i-%i>\n", srb->cmd,
3323 srb->cmd->device->id, srb->cmd->device->lun);
3324 dprintkdbg(DBG_SG, "srb_done: srb=%p sg=%i(%i/%i) buf=%p\n",
3325 srb, scsi_sg_count(cmd), srb->sg_index, srb->sg_count,
3326 scsi_sgtalbe(cmd));
3327 status = srb->target_status;
3328 if (srb->flag & AUTO_REQSENSE) {
3329 dprintkdbg(DBG_0, "srb_done: AUTO_REQSENSE1\n");
3330 pci_unmap_srb_sense(acb, srb);
3331 /*
3332 ** target status..........................
3333 */
3334 srb->flag &= ~AUTO_REQSENSE;
3335 srb->adapter_status = 0;
3336 srb->target_status = CHECK_CONDITION << 1;
3337 if (debug_enabled(DBG_1)) {
3338 switch (cmd->sense_buffer[2] & 0x0f) {
3339 case NOT_READY:
3340 dprintkl(KERN_DEBUG,
3341 "ReqSense: NOT_READY cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
3342 cmd->cmnd[0], dcb->target_id,
3343 dcb->target_lun, status, acb->scan_devices);
3344 break;
3345 case UNIT_ATTENTION:
3346 dprintkl(KERN_DEBUG,
3347 "ReqSense: UNIT_ATTENTION cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
3348 cmd->cmnd[0], dcb->target_id,
3349 dcb->target_lun, status, acb->scan_devices);
3350 break;
3351 case ILLEGAL_REQUEST:
3352 dprintkl(KERN_DEBUG,
3353 "ReqSense: ILLEGAL_REQUEST cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
3354 cmd->cmnd[0], dcb->target_id,
3355 dcb->target_lun, status, acb->scan_devices);
3356 break;
3357 case MEDIUM_ERROR:
3358 dprintkl(KERN_DEBUG,
3359 "ReqSense: MEDIUM_ERROR cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
3360 cmd->cmnd[0], dcb->target_id,
3361 dcb->target_lun, status, acb->scan_devices);
3362 break;
3363 case HARDWARE_ERROR:
3364 dprintkl(KERN_DEBUG,
3365 "ReqSense: HARDWARE_ERROR cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
3366 cmd->cmnd[0], dcb->target_id,
3367 dcb->target_lun, status, acb->scan_devices);
3368 break;
3369 }
3370 if (cmd->sense_buffer[7] >= 6)
3371 printk("sense=0x%02x ASC=0x%02x ASCQ=0x%02x "
3372 "(0x%08x 0x%08x)\n",
3373 cmd->sense_buffer[2], cmd->sense_buffer[12],
3374 cmd->sense_buffer[13],
3375 *((unsigned int *)(cmd->sense_buffer + 3)),
3376 *((unsigned int *)(cmd->sense_buffer + 8)));
3377 else
3378 printk("sense=0x%02x No ASC/ASCQ (0x%08x)\n",
3379 cmd->sense_buffer[2],
3380 *((unsigned int *)(cmd->sense_buffer + 3)));
3381 }
3382
3383 if (status == (CHECK_CONDITION << 1)) {
3384 cmd->result = DID_BAD_TARGET << 16;
3385 goto ckc_e;
3386 }
3387 dprintkdbg(DBG_0, "srb_done: AUTO_REQSENSE2\n");
3388
3389 if (srb->total_xfer_length
3390 && srb->total_xfer_length >= cmd->underflow)
3391 cmd->result =
3392 MK_RES_LNX(DRIVER_SENSE, DID_OK,
3393 srb->end_message, CHECK_CONDITION);
3394 /*SET_RES_DID(cmd->result,DID_OK) */
3395 else
3396 cmd->result =
3397 MK_RES_LNX(DRIVER_SENSE, DID_OK,
3398 srb->end_message, CHECK_CONDITION);
3399
3400 goto ckc_e;
3401 }
3402
3403 /*************************************************************/
3404 if (status) {
3405 /*
3406 * target status..........................
3407 */
3408 if (status_byte(status) == CHECK_CONDITION) {
3409 request_sense(acb, dcb, srb);
3410 return;
3411 } else if (status_byte(status) == QUEUE_FULL) {
3412 tempcnt = (u8)list_size(&dcb->srb_going_list);
3413 dprintkl(KERN_INFO, "QUEUE_FULL for dev <%02i-%i> with %i cmnds\n",
3414 dcb->target_id, dcb->target_lun, tempcnt);
3415 if (tempcnt > 1)
3416 tempcnt--;
3417 dcb->max_command = tempcnt;
3418 free_tag(dcb, srb);
3419 srb_going_to_waiting_move(dcb, srb);
3420 waiting_set_timer(acb, HZ / 20);
3421 srb->adapter_status = 0;
3422 srb->target_status = 0;
3423 return;
3424 } else if (status == SCSI_STAT_SEL_TIMEOUT) {
3425 srb->adapter_status = H_SEL_TIMEOUT;
3426 srb->target_status = 0;
3427 cmd->result = DID_NO_CONNECT << 16;
3428 } else {
3429 srb->adapter_status = 0;
3430 SET_RES_DID(cmd->result, DID_ERROR);
3431 SET_RES_MSG(cmd->result, srb->end_message);
3432 SET_RES_TARGET(cmd->result, status);
3433
3434 }
3435 } else {
3436 /*
3437 ** process initiator status..........................
3438 */
3439 status = srb->adapter_status;
3440 if (status & H_OVER_UNDER_RUN) {
3441 srb->target_status = 0;
3442 SET_RES_DID(cmd->result, DID_OK);
3443 SET_RES_MSG(cmd->result, srb->end_message);
3444 } else if (srb->status & PARITY_ERROR) {
3445 SET_RES_DID(cmd->result, DID_PARITY);
3446 SET_RES_MSG(cmd->result, srb->end_message);
3447 } else { /* No error */
3448
3449 srb->adapter_status = 0;
3450 srb->target_status = 0;
3451 SET_RES_DID(cmd->result, DID_OK);
3452 }
3453 }
3454
3455 if (dir != PCI_DMA_NONE && scsi_sg_count(cmd))
3456 pci_dma_sync_sg_for_cpu(acb->dev, scsi_sglist(cmd),
3457 scsi_sg_count(cmd), dir);
3458
3459 ckc_only = 0;
3460 /* Check Error Conditions */
3461 ckc_e:
3462
3463 if (cmd->cmnd[0] == INQUIRY) {
3464 unsigned char *base = NULL;
3465 struct ScsiInqData *ptr;
3466 unsigned long flags = 0;
3467 struct scatterlist* sg = scsi_sglist(cmd);
3468 size_t offset = 0, len = sizeof(struct ScsiInqData);
3469
3470 local_irq_save(flags);
3471 base = scsi_kmap_atomic_sg(sg, scsi_sg_count(cmd), &offset, &len);
3472 ptr = (struct ScsiInqData *)(base + offset);
3473
3474 if (!ckc_only && (cmd->result & RES_DID) == 0
3475 && cmd->cmnd[2] == 0 && scsi_bufflen(cmd) >= 8
3476 && dir != PCI_DMA_NONE && ptr && (ptr->Vers & 0x07) >= 2)
3477 dcb->inquiry7 = ptr->Flags;
3478
3479 /*if( srb->cmd->cmnd[0] == INQUIRY && */
3480 /* (host_byte(cmd->result) == DID_OK || status_byte(cmd->result) & CHECK_CONDITION) ) */
3481 if ((cmd->result == (DID_OK << 16)
3482 || status_byte(cmd->result) &
3483 CHECK_CONDITION)) {
3484 if (!dcb->init_tcq_flag) {
3485 add_dev(acb, dcb, ptr);
3486 dcb->init_tcq_flag = 1;
3487 }
3488 }
3489
3490 scsi_kunmap_atomic_sg(base);
3491 local_irq_restore(flags);
3492 }
3493
3494 /* Here is the info for Doug Gilbert's sg3 ... */
3495 scsi_set_resid(cmd, srb->total_xfer_length);
3496 /* This may be interpreted by sb. or not ... */
3497 cmd->SCp.this_residual = srb->total_xfer_length;
3498 cmd->SCp.buffers_residual = 0;
3499 if (debug_enabled(DBG_KG)) {
3500 if (srb->total_xfer_length)
3501 dprintkdbg(DBG_KG, "srb_done: (0x%p) <%02i-%i> "
3502 "cmnd=0x%02x Missed %i bytes\n",
3503 cmd, cmd->device->id, cmd->device->lun,
3504 cmd->cmnd[0], srb->total_xfer_length);
3505 }
3506
3507 srb_going_remove(dcb, srb);
3508 /* Add to free list */
3509 if (srb == acb->tmp_srb)
3510 dprintkl(KERN_ERR, "srb_done: ERROR! Completed cmd with tmp_srb\n");
3511 else {
3512 dprintkdbg(DBG_0, "srb_done: (0x%p) done result=0x%08x\n",
3513 cmd, cmd->result);
3514 srb_free_insert(acb, srb);
3515 }
3516 pci_unmap_srb(acb, srb);
3517
3518 cmd->scsi_done(cmd);
3519 waiting_process_next(acb);
3520 }
3521
3522
3523 /* abort all cmds in our queues */
3524 static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
3525 struct scsi_cmnd *cmd, u8 force)
3526 {
3527 struct DeviceCtlBlk *dcb;
3528 dprintkl(KERN_INFO, "doing_srb_done: pids ");
3529
3530 list_for_each_entry(dcb, &acb->dcb_list, list) {
3531 struct ScsiReqBlk *srb;
3532 struct ScsiReqBlk *tmp;
3533 struct scsi_cmnd *p;
3534
3535 list_for_each_entry_safe(srb, tmp, &dcb->srb_going_list, list) {
3536 enum dma_data_direction dir;
3537 int result;
3538
3539 p = srb->cmd;
3540 dir = p->sc_data_direction;
3541 result = MK_RES(0, did_flag, 0, 0);
3542 printk("G:%p(%02i-%i) ", p,
3543 p->device->id, p->device->lun);
3544 srb_going_remove(dcb, srb);
3545 free_tag(dcb, srb);
3546 srb_free_insert(acb, srb);
3547 p->result = result;
3548 pci_unmap_srb_sense(acb, srb);
3549 pci_unmap_srb(acb, srb);
3550 if (force) {
3551 /* For new EH, we normally don't need to give commands back,
3552 * as they all complete or all time out */
3553 p->scsi_done(p);
3554 }
3555 }
3556 if (!list_empty(&dcb->srb_going_list))
3557 dprintkl(KERN_DEBUG,
3558 "How could the ML send cmnds to the Going queue? <%02i-%i>\n",
3559 dcb->target_id, dcb->target_lun);
3560 if (dcb->tag_mask)
3561 dprintkl(KERN_DEBUG,
3562 "tag_mask for <%02i-%i> should be empty, is %08x!\n",
3563 dcb->target_id, dcb->target_lun,
3564 dcb->tag_mask);
3565
3566 /* Waiting queue */
3567 list_for_each_entry_safe(srb, tmp, &dcb->srb_waiting_list, list) {
3568 int result;
3569 p = srb->cmd;
3570
3571 result = MK_RES(0, did_flag, 0, 0);
3572 printk("W:%p<%02i-%i>", p, p->device->id,
3573 p->device->lun);
3574 srb_waiting_remove(dcb, srb);
3575 srb_free_insert(acb, srb);
3576 p->result = result;
3577 pci_unmap_srb_sense(acb, srb);
3578 pci_unmap_srb(acb, srb);
3579 if (force) {
3580 /* For new EH, we normally don't need to give commands back,
3581 * as they all complete or all time out */
3582 cmd->scsi_done(cmd);
3583 }
3584 }
3585 if (!list_empty(&dcb->srb_waiting_list))
3586 dprintkl(KERN_DEBUG, "ML queued %i cmnds again to <%02i-%i>\n",
3587 list_size(&dcb->srb_waiting_list), dcb->target_id,
3588 dcb->target_lun);
3589 dcb->flag &= ~ABORT_DEV_;
3590 }
3591 printk("\n");
3592 }
3593
3594
3595 static void reset_scsi_bus(struct AdapterCtlBlk *acb)
3596 {
3597 dprintkdbg(DBG_0, "reset_scsi_bus: acb=%p\n", acb);
3598 acb->acb_flag |= RESET_DEV; /* RESET_DETECT, RESET_DONE, RESET_DEV */
3599 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_RSTSCSI);
3600
3601 while (!(DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS) & INT_SCSIRESET))
3602 /* nothing */;
3603 }
3604
3605
3606 static void set_basic_config(struct AdapterCtlBlk *acb)
3607 {
3608 u8 bval;
3609 u16 wval;
3610 DC395x_write8(acb, TRM_S1040_SCSI_TIMEOUT, acb->sel_timeout);
3611 if (acb->config & HCC_PARITY)
3612 bval = PHASELATCH | INITIATOR | BLOCKRST | PARITYCHECK;
3613 else
3614 bval = PHASELATCH | INITIATOR | BLOCKRST;
3615
3616 DC395x_write8(acb, TRM_S1040_SCSI_CONFIG0, bval);
3617
3618 /* program configuration 1: Act_Neg (+ Act_Neg_Enh? + Fast_Filter? + DataDis?) */
3619 DC395x_write8(acb, TRM_S1040_SCSI_CONFIG1, 0x03); /* was 0x13: default */
3620 /* program Host ID */
3621 DC395x_write8(acb, TRM_S1040_SCSI_HOSTID, acb->scsi_host->this_id);
3622 /* set ansynchronous transfer */
3623 DC395x_write8(acb, TRM_S1040_SCSI_OFFSET, 0x00);
3624 /* Turn LED control off */
3625 wval = DC395x_read16(acb, TRM_S1040_GEN_CONTROL) & 0x7F;
3626 DC395x_write16(acb, TRM_S1040_GEN_CONTROL, wval);
3627 /* DMA config */
3628 wval = DC395x_read16(acb, TRM_S1040_DMA_CONFIG) & ~DMA_FIFO_CTRL;
3629 wval |=
3630 DMA_FIFO_HALF_HALF | DMA_ENHANCE /*| DMA_MEM_MULTI_READ */ ;
3631 DC395x_write16(acb, TRM_S1040_DMA_CONFIG, wval);
3632 /* Clear pending interrupt status */
3633 DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
3634 /* Enable SCSI interrupt */
3635 DC395x_write8(acb, TRM_S1040_SCSI_INTEN, 0x7F);
3636 DC395x_write8(acb, TRM_S1040_DMA_INTEN, EN_SCSIINTR | EN_DMAXFERERROR
3637 /*| EN_DMAXFERABORT | EN_DMAXFERCOMP | EN_FORCEDMACOMP */
3638 );
3639 }
3640
3641
3642 static void scsi_reset_detect(struct AdapterCtlBlk *acb)
3643 {
3644 dprintkl(KERN_INFO, "scsi_reset_detect: acb=%p\n", acb);
3645 /* delay half a second */
3646 if (timer_pending(&acb->waiting_timer))
3647 del_timer(&acb->waiting_timer);
3648
3649 DC395x_write8(acb, TRM_S1040_SCSI_CONTROL, DO_RSTMODULE);
3650 DC395x_write8(acb, TRM_S1040_DMA_CONTROL, DMARESETMODULE);
3651 /*DC395x_write8(acb, TRM_S1040_DMA_CONTROL,STOPDMAXFER); */
3652 udelay(500);
3653 /* Maybe we locked up the bus? Then lets wait even longer ... */
3654 acb->last_reset =
3655 jiffies + 5 * HZ / 2 +
3656 HZ * acb->eeprom.delay_time;
3657
3658 clear_fifo(acb, "scsi_reset_detect");
3659 set_basic_config(acb);
3660 /*1.25 */
3661 /*DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT); */
3662
3663 if (acb->acb_flag & RESET_DEV) { /* RESET_DETECT, RESET_DONE, RESET_DEV */
3664 acb->acb_flag |= RESET_DONE;
3665 } else {
3666 acb->acb_flag |= RESET_DETECT;
3667 reset_dev_param(acb);
3668 doing_srb_done(acb, DID_RESET, NULL, 1);
3669 /*DC395x_RecoverSRB( acb ); */
3670 acb->active_dcb = NULL;
3671 acb->acb_flag = 0;
3672 waiting_process_next(acb);
3673 }
3674 }
3675
3676
3677 static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
3678 struct ScsiReqBlk *srb)
3679 {
3680 struct scsi_cmnd *cmd = srb->cmd;
3681 dprintkdbg(DBG_1, "request_sense: (0x%p) <%02i-%i>\n",
3682 cmd, cmd->device->id, cmd->device->lun);
3683
3684 srb->flag |= AUTO_REQSENSE;
3685 srb->adapter_status = 0;
3686 srb->target_status = 0;
3687
3688 /* KG: Can this prevent crap sense data ? */
3689 memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
3690
3691 /* Save some data */
3692 srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].address =
3693 srb->segment_x[0].address;
3694 srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].length =
3695 srb->segment_x[0].length;
3696 srb->xferred = srb->total_xfer_length;
3697 /* srb->segment_x : a one entry of S/G list table */
3698 srb->total_xfer_length = SCSI_SENSE_BUFFERSIZE;
3699 srb->segment_x[0].length = SCSI_SENSE_BUFFERSIZE;
3700 /* Map sense buffer */
3701 srb->segment_x[0].address =
3702 pci_map_single(acb->dev, cmd->sense_buffer,
3703 SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE);
3704 dprintkdbg(DBG_SG, "request_sense: map buffer %p->%08x(%05x)\n",
3705 cmd->sense_buffer, srb->segment_x[0].address,
3706 SCSI_SENSE_BUFFERSIZE);
3707 srb->sg_count = 1;
3708 srb->sg_index = 0;
3709
3710 if (start_scsi(acb, dcb, srb)) { /* Should only happen, if sb. else grabs the bus */
3711 dprintkl(KERN_DEBUG,
3712 "request_sense: (0x%p) failed <%02i-%i>\n",
3713 srb->cmd, dcb->target_id, dcb->target_lun);
3714 srb_going_to_waiting_move(dcb, srb);
3715 waiting_set_timer(acb, HZ / 100);
3716 }
3717 }
3718
3719
3720 /**
3721 * device_alloc - Allocate a new device instance. This create the
3722 * devices instance and sets up all the data items. The adapter
3723 * instance is required to obtain confiuration information for this
3724 * device. This does *not* add this device to the adapters device
3725 * list.
3726 *
3727 * @acb: The adapter to obtain configuration information from.
3728 * @target: The target for the new device.
3729 * @lun: The lun for the new device.
3730 *
3731 * Return the new device if successful or NULL on failure.
3732 **/
3733 static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb,
3734 u8 target, u8 lun)
3735 {
3736 struct NvRamType *eeprom = &acb->eeprom;
3737 u8 period_index = eeprom->target[target].period & 0x07;
3738 struct DeviceCtlBlk *dcb;
3739
3740 dcb = kmalloc(sizeof(struct DeviceCtlBlk), GFP_ATOMIC);
3741 dprintkdbg(DBG_0, "device_alloc: <%02i-%i>\n", target, lun);
3742 if (!dcb)
3743 return NULL;
3744 dcb->acb = NULL;
3745 INIT_LIST_HEAD(&dcb->srb_going_list);
3746 INIT_LIST_HEAD(&dcb->srb_waiting_list);
3747 dcb->active_srb = NULL;
3748 dcb->tag_mask = 0;
3749 dcb->max_command = 1;
3750 dcb->target_id = target;
3751 dcb->target_lun = lun;
3752 dcb->dev_mode = eeprom->target[target].cfg0;
3753 #ifndef DC395x_NO_DISCONNECT
3754 dcb->identify_msg =
3755 IDENTIFY(dcb->dev_mode & NTC_DO_DISCONNECT, lun);
3756 #else
3757 dcb->identify_msg = IDENTIFY(0, lun);
3758 #endif
3759 dcb->inquiry7 = 0;
3760 dcb->sync_mode = 0;
3761 dcb->min_nego_period = clock_period[period_index];
3762 dcb->sync_period = 0;
3763 dcb->sync_offset = 0;
3764 dcb->flag = 0;
3765
3766 #ifndef DC395x_NO_WIDE
3767 if ((dcb->dev_mode & NTC_DO_WIDE_NEGO)
3768 && (acb->config & HCC_WIDE_CARD))
3769 dcb->sync_mode |= WIDE_NEGO_ENABLE;
3770 #endif
3771 #ifndef DC395x_NO_SYNC
3772 if (dcb->dev_mode & NTC_DO_SYNC_NEGO)
3773 if (!(lun) || current_sync_offset)
3774 dcb->sync_mode |= SYNC_NEGO_ENABLE;
3775 #endif
3776 if (dcb->target_lun != 0) {
3777 /* Copy settings */
3778 struct DeviceCtlBlk *p;
3779 list_for_each_entry(p, &acb->dcb_list, list)
3780 if (p->target_id == dcb->target_id)
3781 break;
3782 dprintkdbg(DBG_1,
3783 "device_alloc: <%02i-%i> copy from <%02i-%i>\n",
3784 dcb->target_id, dcb->target_lun,
3785 p->target_id, p->target_lun);
3786 dcb->sync_mode = p->sync_mode;
3787 dcb->sync_period = p->sync_period;
3788 dcb->min_nego_period = p->min_nego_period;
3789 dcb->sync_offset = p->sync_offset;
3790 dcb->inquiry7 = p->inquiry7;
3791 }
3792 return dcb;
3793 }
3794
3795
3796 /**
3797 * adapter_add_device - Adds the device instance to the adaptor instance.
3798 *
3799 * @acb: The adapter device to be updated
3800 * @dcb: A newly created and initialised device instance to add.
3801 **/
3802 static void adapter_add_device(struct AdapterCtlBlk *acb,
3803 struct DeviceCtlBlk *dcb)
3804 {
3805 /* backpointer to adapter */
3806 dcb->acb = acb;
3807
3808 /* set run_robin to this device if it is currently empty */
3809 if (list_empty(&acb->dcb_list))
3810 acb->dcb_run_robin = dcb;
3811
3812 /* add device to list */
3813 list_add_tail(&dcb->list, &acb->dcb_list);
3814
3815 /* update device maps */
3816 acb->dcb_map[dcb->target_id] |= (1 << dcb->target_lun);
3817 acb->children[dcb->target_id][dcb->target_lun] = dcb;
3818 }
3819
3820
3821 /**
3822 * adapter_remove_device - Removes the device instance from the adaptor
3823 * instance. The device instance is not check in any way or freed by this.
3824 * The caller is expected to take care of that. This will simply remove the
3825 * device from the adapters data strcutures.
3826 *
3827 * @acb: The adapter device to be updated
3828 * @dcb: A device that has previously been added to the adapter.
3829 **/
3830 static void adapter_remove_device(struct AdapterCtlBlk *acb,
3831 struct DeviceCtlBlk *dcb)
3832 {
3833 struct DeviceCtlBlk *i;
3834 struct DeviceCtlBlk *tmp;
3835 dprintkdbg(DBG_0, "adapter_remove_device: <%02i-%i>\n",
3836 dcb->target_id, dcb->target_lun);
3837
3838 /* fix up any pointers to this device that we have in the adapter */
3839 if (acb->active_dcb == dcb)
3840 acb->active_dcb = NULL;
3841 if (acb->dcb_run_robin == dcb)
3842 acb->dcb_run_robin = dcb_get_next(&acb->dcb_list, dcb);
3843
3844 /* unlink from list */
3845 list_for_each_entry_safe(i, tmp, &acb->dcb_list, list)
3846 if (dcb == i) {
3847 list_del(&i->list);
3848 break;
3849 }
3850
3851 /* clear map and children */
3852 acb->dcb_map[dcb->target_id] &= ~(1 << dcb->target_lun);
3853 acb->children[dcb->target_id][dcb->target_lun] = NULL;
3854 dcb->acb = NULL;
3855 }
3856
3857
3858 /**
3859 * adapter_remove_and_free_device - Removes a single device from the adapter
3860 * and then frees the device information.
3861 *
3862 * @acb: The adapter device to be updated
3863 * @dcb: A device that has previously been added to the adapter.
3864 */
3865 static void adapter_remove_and_free_device(struct AdapterCtlBlk *acb,
3866 struct DeviceCtlBlk *dcb)
3867 {
3868 if (list_size(&dcb->srb_going_list) > 1) {
3869 dprintkdbg(DBG_1, "adapter_remove_and_free_device: <%02i-%i> "
3870 "Won't remove because of %i active requests.\n",
3871 dcb->target_id, dcb->target_lun,
3872 list_size(&dcb->srb_going_list));
3873 return;
3874 }
3875 adapter_remove_device(acb, dcb);
3876 kfree(dcb);
3877 }
3878
3879
3880 /**
3881 * adapter_remove_and_free_all_devices - Removes and frees all of the
3882 * devices associated with the specified adapter.
3883 *
3884 * @acb: The adapter from which all devices should be removed.
3885 **/
3886 static void adapter_remove_and_free_all_devices(struct AdapterCtlBlk* acb)
3887 {
3888 struct DeviceCtlBlk *dcb;
3889 struct DeviceCtlBlk *tmp;
3890 dprintkdbg(DBG_1, "adapter_remove_and_free_all_devices: num=%i\n",
3891 list_size(&acb->dcb_list));
3892
3893 list_for_each_entry_safe(dcb, tmp, &acb->dcb_list, list)
3894 adapter_remove_and_free_device(acb, dcb);
3895 }
3896
3897
3898 /**
3899 * dc395x_slave_alloc - Called by the scsi mid layer to tell us about a new
3900 * scsi device that we need to deal with. We allocate a new device and then
3901 * insert that device into the adapters device list.
3902 *
3903 * @scsi_device: The new scsi device that we need to handle.
3904 **/
3905 static int dc395x_slave_alloc(struct scsi_device *scsi_device)
3906 {
3907 struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)scsi_device->host->hostdata;
3908 struct DeviceCtlBlk *dcb;
3909
3910 dcb = device_alloc(acb, scsi_device->id, scsi_device->lun);
3911 if (!dcb)
3912 return -ENOMEM;
3913 adapter_add_device(acb, dcb);
3914
3915 return 0;
3916 }
3917
3918
3919 /**
3920 * dc395x_slave_destroy - Called by the scsi mid layer to tell us about a
3921 * device that is going away.
3922 *
3923 * @scsi_device: The new scsi device that we need to handle.
3924 **/
3925 static void dc395x_slave_destroy(struct scsi_device *scsi_device)
3926 {
3927 struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)scsi_device->host->hostdata;
3928 struct DeviceCtlBlk *dcb = find_dcb(acb, scsi_device->id, scsi_device->lun);
3929 if (dcb)
3930 adapter_remove_and_free_device(acb, dcb);
3931 }
3932
3933
3934
3935
3936 /**
3937 * trms1040_wait_30us: wait for 30 us
3938 *
3939 * Waits for 30us (using the chip by the looks of it..)
3940 *
3941 * @io_port: base I/O address
3942 **/
3943 static void trms1040_wait_30us(unsigned long io_port)
3944 {
3945 /* ScsiPortStallExecution(30); wait 30 us */
3946 outb(5, io_port + TRM_S1040_GEN_TIMER);
3947 while (!(inb(io_port + TRM_S1040_GEN_STATUS) & GTIMEOUT))
3948 /* nothing */ ;
3949 }
3950
3951
3952 /**
3953 * trms1040_write_cmd - write the secified command and address to
3954 * chip
3955 *
3956 * @io_port: base I/O address
3957 * @cmd: SB + op code (command) to send
3958 * @addr: address to send
3959 **/
3960 static void trms1040_write_cmd(unsigned long io_port, u8 cmd, u8 addr)
3961 {
3962 int i;
3963 u8 send_data;
3964
3965 /* program SB + OP code */
3966 for (i = 0; i < 3; i++, cmd <<= 1) {
3967 send_data = NVR_SELECT;
3968 if (cmd & 0x04) /* Start from bit 2 */
3969 send_data |= NVR_BITOUT;
3970
3971 outb(send_data, io_port + TRM_S1040_GEN_NVRAM);
3972 trms1040_wait_30us(io_port);
3973 outb((send_data | NVR_CLOCK),
3974 io_port + TRM_S1040_GEN_NVRAM);
3975 trms1040_wait_30us(io_port);
3976 }
3977
3978 /* send address */
3979 for (i = 0; i < 7; i++, addr <<= 1) {
3980 send_data = NVR_SELECT;
3981 if (addr & 0x40) /* Start from bit 6 */
3982 send_data |= NVR_BITOUT;
3983
3984 outb(send_data, io_port + TRM_S1040_GEN_NVRAM);
3985 trms1040_wait_30us(io_port);
3986 outb((send_data | NVR_CLOCK),
3987 io_port + TRM_S1040_GEN_NVRAM);
3988 trms1040_wait_30us(io_port);
3989 }
3990 outb(NVR_SELECT, io_port + TRM_S1040_GEN_NVRAM);
3991 trms1040_wait_30us(io_port);
3992 }
3993
3994
3995 /**
3996 * trms1040_set_data - store a single byte in the eeprom
3997 *
3998 * Called from write all to write a single byte into the SSEEPROM
3999 * Which is done one bit at a time.
4000 *
4001 * @io_port: base I/O address
4002 * @addr: offset into EEPROM
4003 * @byte: bytes to write
4004 **/
4005 static void trms1040_set_data(unsigned long io_port, u8 addr, u8 byte)
4006 {
4007 int i;
4008 u8 send_data;
4009
4010 /* Send write command & address */
4011 trms1040_write_cmd(io_port, 0x05, addr);
4012
4013 /* Write data */
4014 for (i = 0; i < 8; i++, byte <<= 1) {
4015 send_data = NVR_SELECT;
4016 if (byte & 0x80) /* Start from bit 7 */
4017 send_data |= NVR_BITOUT;
4018
4019 outb(send_data, io_port + TRM_S1040_GEN_NVRAM);
4020 trms1040_wait_30us(io_port);
4021 outb((send_data | NVR_CLOCK), io_port + TRM_S1040_GEN_NVRAM);
4022 trms1040_wait_30us(io_port);
4023 }
4024 outb(NVR_SELECT, io_port + TRM_S1040_GEN_NVRAM);
4025 trms1040_wait_30us(io_port);
4026
4027 /* Disable chip select */
4028 outb(0, io_port + TRM_S1040_GEN_NVRAM);
4029 trms1040_wait_30us(io_port);
4030
4031 outb(NVR_SELECT, io_port + TRM_S1040_GEN_NVRAM);
4032 trms1040_wait_30us(io_port);
4033
4034 /* Wait for write ready */
4035 while (1) {
4036 outb((NVR_SELECT | NVR_CLOCK), io_port + TRM_S1040_GEN_NVRAM);
4037 trms1040_wait_30us(io_port);
4038
4039 outb(NVR_SELECT, io_port + TRM_S1040_GEN_NVRAM);
4040 trms1040_wait_30us(io_port);
4041
4042 if (inb(io_port + TRM_S1040_GEN_NVRAM) & NVR_BITIN)
4043 break;
4044 }
4045
4046 /* Disable chip select */
4047 outb(0, io_port + TRM_S1040_GEN_NVRAM);
4048 }
4049
4050
4051 /**
4052 * trms1040_write_all - write 128 bytes to the eeprom
4053 *
4054 * Write the supplied 128 bytes to the chips SEEPROM
4055 *
4056 * @eeprom: the data to write
4057 * @io_port: the base io port
4058 **/
4059 static void trms1040_write_all(struct NvRamType *eeprom, unsigned long io_port)
4060 {
4061 u8 *b_eeprom = (u8 *)eeprom;
4062 u8 addr;
4063
4064 /* Enable SEEPROM */
4065 outb((inb(io_port + TRM_S1040_GEN_CONTROL) | EN_EEPROM),
4066 io_port + TRM_S1040_GEN_CONTROL);
4067
4068 /* write enable */
4069 trms1040_write_cmd(io_port, 0x04, 0xFF);
4070 outb(0, io_port + TRM_S1040_GEN_NVRAM);
4071 trms1040_wait_30us(io_port);
4072
4073 /* write */
4074 for (addr = 0; addr < 128; addr++, b_eeprom++)
4075 trms1040_set_data(io_port, addr, *b_eeprom);
4076
4077 /* write disable */
4078 trms1040_write_cmd(io_port, 0x04, 0x00);
4079 outb(0, io_port + TRM_S1040_GEN_NVRAM);
4080 trms1040_wait_30us(io_port);
4081
4082 /* Disable SEEPROM */
4083 outb((inb(io_port + TRM_S1040_GEN_CONTROL) & ~EN_EEPROM),
4084 io_port + TRM_S1040_GEN_CONTROL);
4085 }
4086
4087
4088 /**
4089 * trms1040_get_data - get a single byte from the eeprom
4090 *
4091 * Called from read all to read a single byte into the SSEEPROM
4092 * Which is done one bit at a time.
4093 *
4094 * @io_port: base I/O address
4095 * @addr: offset into SEEPROM
4096 *
4097 * Returns the byte read.
4098 **/
4099 static u8 trms1040_get_data(unsigned long io_port, u8 addr)
4100 {
4101 int i;
4102 u8 read_byte;
4103 u8 result = 0;
4104
4105 /* Send read command & address */
4106 trms1040_write_cmd(io_port, 0x06, addr);
4107
4108 /* read data */
4109 for (i = 0; i < 8; i++) {
4110 outb((NVR_SELECT | NVR_CLOCK), io_port + TRM_S1040_GEN_NVRAM);
4111 trms1040_wait_30us(io_port);
4112 outb(NVR_SELECT, io_port + TRM_S1040_GEN_NVRAM);
4113
4114 /* Get data bit while falling edge */
4115 read_byte = inb(io_port + TRM_S1040_GEN_NVRAM);
4116 result <<= 1;
4117 if (read_byte & NVR_BITIN)
4118 result |= 1;
4119
4120 trms1040_wait_30us(io_port);
4121 }
4122
4123 /* Disable chip select */
4124 outb(0, io_port + TRM_S1040_GEN_NVRAM);
4125 return result;
4126 }
4127
4128
4129 /**
4130 * trms1040_read_all - read all bytes from the eeprom
4131 *
4132 * Read the 128 bytes from the SEEPROM.
4133 *
4134 * @eeprom: where to store the data
4135 * @io_port: the base io port
4136 **/
4137 static void trms1040_read_all(struct NvRamType *eeprom, unsigned long io_port)
4138 {
4139 u8 *b_eeprom = (u8 *)eeprom;
4140 u8 addr;
4141
4142 /* Enable SEEPROM */
4143 outb((inb(io_port + TRM_S1040_GEN_CONTROL) | EN_EEPROM),
4144 io_port + TRM_S1040_GEN_CONTROL);
4145
4146 /* read details */
4147 for (addr = 0; addr < 128; addr++, b_eeprom++)
4148 *b_eeprom = trms1040_get_data(io_port, addr);
4149
4150 /* Disable SEEPROM */
4151 outb((inb(io_port + TRM_S1040_GEN_CONTROL) & ~EN_EEPROM),
4152 io_port + TRM_S1040_GEN_CONTROL);
4153 }
4154
4155
4156
4157 /**
4158 * check_eeprom - get and check contents of the eeprom
4159 *
4160 * Read seeprom 128 bytes into the memory provider in eeprom.
4161 * Checks the checksum and if it's not correct it uses a set of default
4162 * values.
4163 *
4164 * @eeprom: caller allocated strcuture to read the eeprom data into
4165 * @io_port: io port to read from
4166 **/
4167 static void check_eeprom(struct NvRamType *eeprom, unsigned long io_port)
4168 {
4169 u16 *w_eeprom = (u16 *)eeprom;
4170 u16 w_addr;
4171 u16 cksum;
4172 u32 d_addr;
4173 u32 *d_eeprom;
4174
4175 trms1040_read_all(eeprom, io_port); /* read eeprom */
4176
4177 cksum = 0;
4178 for (w_addr = 0, w_eeprom = (u16 *)eeprom; w_addr < 64;
4179 w_addr++, w_eeprom++)
4180 cksum += *w_eeprom;
4181 if (cksum != 0x1234) {
4182 /*
4183 * Checksum is wrong.
4184 * Load a set of defaults into the eeprom buffer
4185 */
4186 dprintkl(KERN_WARNING,
4187 "EEProm checksum error: using default values and options.\n");
4188 eeprom->sub_vendor_id[0] = (u8)PCI_VENDOR_ID_TEKRAM;
4189 eeprom->sub_vendor_id[1] = (u8)(PCI_VENDOR_ID_TEKRAM >> 8);
4190 eeprom->sub_sys_id[0] = (u8)PCI_DEVICE_ID_TEKRAM_TRMS1040;
4191 eeprom->sub_sys_id[1] =
4192 (u8)(PCI_DEVICE_ID_TEKRAM_TRMS1040 >> 8);
4193 eeprom->sub_class = 0x00;
4194 eeprom->vendor_id[0] = (u8)PCI_VENDOR_ID_TEKRAM;
4195 eeprom->vendor_id[1] = (u8)(PCI_VENDOR_ID_TEKRAM >> 8);
4196 eeprom->device_id[0] = (u8)PCI_DEVICE_ID_TEKRAM_TRMS1040;
4197 eeprom->device_id[1] =
4198 (u8)(PCI_DEVICE_ID_TEKRAM_TRMS1040 >> 8);
4199 eeprom->reserved = 0x00;
4200
4201 for (d_addr = 0, d_eeprom = (u32 *)eeprom->target;
4202 d_addr < 16; d_addr++, d_eeprom++)
4203 *d_eeprom = 0x00000077; /* cfg3,cfg2,period,cfg0 */
4204
4205 *d_eeprom++ = 0x04000F07; /* max_tag,delay_time,channel_cfg,scsi_id */
4206 *d_eeprom++ = 0x00000015; /* reserved1,boot_lun,boot_target,reserved0 */
4207 for (d_addr = 0; d_addr < 12; d_addr++, d_eeprom++)
4208 *d_eeprom = 0x00;
4209
4210 /* Now load defaults (maybe set by boot/module params) */
4211 set_safe_settings();
4212 fix_settings();
4213 eeprom_override(eeprom);
4214
4215 eeprom->cksum = 0x00;
4216 for (w_addr = 0, cksum = 0, w_eeprom = (u16 *)eeprom;
4217 w_addr < 63; w_addr++, w_eeprom++)
4218 cksum += *w_eeprom;
4219
4220 *w_eeprom = 0x1234 - cksum;
4221 trms1040_write_all(eeprom, io_port);
4222 eeprom->delay_time = cfg_data[CFG_RESET_DELAY].value;
4223 } else {
4224 set_safe_settings();
4225 eeprom_index_to_delay(eeprom);
4226 eeprom_override(eeprom);
4227 }
4228 }
4229
4230
4231 /**
4232 * print_eeprom_settings - output the eeprom settings
4233 * to the kernel log so people can see what they were.
4234 *
4235 * @eeprom: The eeprom data strucutre to show details for.
4236 **/
4237 static void print_eeprom_settings(struct NvRamType *eeprom)
4238 {
4239 dprintkl(KERN_INFO, "Used settings: AdapterID=%02i, Speed=%i(%02i.%01iMHz), dev_mode=0x%02x\n",
4240 eeprom->scsi_id,
4241 eeprom->target[0].period,
4242 clock_speed[eeprom->target[0].period] / 10,
4243 clock_speed[eeprom->target[0].period] % 10,
4244 eeprom->target[0].cfg0);
4245 dprintkl(KERN_INFO, " AdaptMode=0x%02x, Tags=%i(%02i), DelayReset=%is\n",
4246 eeprom->channel_cfg, eeprom->max_tag,
4247 1 << eeprom->max_tag, eeprom->delay_time);
4248 }
4249
4250
4251 /* Free SG tables */
4252 static void adapter_sg_tables_free(struct AdapterCtlBlk *acb)
4253 {
4254 int i;
4255 const unsigned srbs_per_page = PAGE_SIZE/SEGMENTX_LEN;
4256
4257 for (i = 0; i < DC395x_MAX_SRB_CNT; i += srbs_per_page)
4258 kfree(acb->srb_array[i].segment_x);
4259 }
4260
4261
4262 /*
4263 * Allocate SG tables; as we have to pci_map them, an SG list (struct SGentry*)
4264 * should never cross a page boundary */
4265 static int adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
4266 {
4267 const unsigned mem_needed = (DC395x_MAX_SRB_CNT+1)
4268 *SEGMENTX_LEN;
4269 int pages = (mem_needed+(PAGE_SIZE-1))/PAGE_SIZE;
4270 const unsigned srbs_per_page = PAGE_SIZE/SEGMENTX_LEN;
4271 int srb_idx = 0;
4272 unsigned i = 0;
4273 struct SGentry *uninitialized_var(ptr);
4274
4275 for (i = 0; i < DC395x_MAX_SRB_CNT; i++)
4276 acb->srb_array[i].segment_x = NULL;
4277
4278 dprintkdbg(DBG_1, "Allocate %i pages for SG tables\n", pages);
4279 while (pages--) {
4280 ptr = kmalloc(PAGE_SIZE, GFP_KERNEL);
4281 if (!ptr) {
4282 adapter_sg_tables_free(acb);
4283 return 1;
4284 }
4285 dprintkdbg(DBG_1, "Allocate %li bytes at %p for SG segments %i\n",
4286 PAGE_SIZE, ptr, srb_idx);
4287 i = 0;
4288 while (i < srbs_per_page && srb_idx < DC395x_MAX_SRB_CNT)
4289 acb->srb_array[srb_idx++].segment_x =
4290 ptr + (i++ * DC395x_MAX_SG_LISTENTRY);
4291 }
4292 if (i < srbs_per_page)
4293 acb->srb.segment_x =
4294 ptr + (i * DC395x_MAX_SG_LISTENTRY);
4295 else
4296 dprintkl(KERN_DEBUG, "No space for tmsrb SG table reserved?!\n");
4297 return 0;
4298 }
4299
4300
4301
4302 /**
4303 * adapter_print_config - print adapter connection and termination
4304 * config
4305 *
4306 * The io port in the adapter needs to have been set before calling
4307 * this function.
4308 *
4309 * @acb: The adapter to print the information for.
4310 **/
4311 static void adapter_print_config(struct AdapterCtlBlk *acb)
4312 {
4313 u8 bval;
4314
4315 bval = DC395x_read8(acb, TRM_S1040_GEN_STATUS);
4316 dprintkl(KERN_INFO, "%sConnectors: ",
4317 ((bval & WIDESCSI) ? "(Wide) " : ""));
4318 if (!(bval & CON5068))
4319 printk("ext%s ", !(bval & EXT68HIGH) ? "68" : "50");
4320 if (!(bval & CON68))
4321 printk("int68%s ", !(bval & INT68HIGH) ? "" : "(50)");
4322 if (!(bval & CON50))
4323 printk("int50 ");
4324 if ((bval & (CON5068 | CON50 | CON68)) ==
4325 0 /*(CON5068 | CON50 | CON68) */ )
4326 printk(" Oops! (All 3?) ");
4327 bval = DC395x_read8(acb, TRM_S1040_GEN_CONTROL);
4328 printk(" Termination: ");
4329 if (bval & DIS_TERM)
4330 printk("Disabled\n");
4331 else {
4332 if (bval & AUTOTERM)
4333 printk("Auto ");
4334 if (bval & LOW8TERM)
4335 printk("Low ");
4336 if (bval & UP8TERM)
4337 printk("High ");
4338 printk("\n");
4339 }
4340 }
4341
4342
4343 /**
4344 * adapter_init_params - Initialize the various parameters in the
4345 * adapter structure. Note that the pointer to the scsi_host is set
4346 * early (when this instance is created) and the io_port and irq
4347 * values are set later after they have been reserved. This just gets
4348 * everything set to a good starting position.
4349 *
4350 * The eeprom structure in the adapter needs to have been set before
4351 * calling this function.
4352 *
4353 * @acb: The adapter to initialize.
4354 **/
4355 static void adapter_init_params(struct AdapterCtlBlk *acb)
4356 {
4357 struct NvRamType *eeprom = &acb->eeprom;
4358 int i;
4359
4360 /* NOTE: acb->scsi_host is set at scsi_host/acb creation time */
4361 /* NOTE: acb->io_port_base is set at port registration time */
4362 /* NOTE: acb->io_port_len is set at port registration time */
4363
4364 INIT_LIST_HEAD(&acb->dcb_list);
4365 acb->dcb_run_robin = NULL;
4366 acb->active_dcb = NULL;
4367
4368 INIT_LIST_HEAD(&acb->srb_free_list);
4369 /* temp SRB for Q tag used or abort command used */
4370 acb->tmp_srb = &acb->srb;
4371 init_timer(&acb->waiting_timer);
4372 init_timer(&acb->selto_timer);
4373
4374 acb->srb_count = DC395x_MAX_SRB_CNT;
4375
4376 acb->sel_timeout = DC395x_SEL_TIMEOUT; /* timeout=250ms */
4377 /* NOTE: acb->irq_level is set at IRQ registration time */
4378
4379 acb->tag_max_num = 1 << eeprom->max_tag;
4380 if (acb->tag_max_num > 30)
4381 acb->tag_max_num = 30;
4382
4383 acb->acb_flag = 0; /* RESET_DETECT, RESET_DONE, RESET_DEV */
4384 acb->gmode2 = eeprom->channel_cfg;
4385 acb->config = 0; /* NOTE: actually set in adapter_init_chip */
4386
4387 if (eeprom->channel_cfg & NAC_SCANLUN)
4388 acb->lun_chk = 1;
4389 acb->scan_devices = 1;
4390
4391 acb->scsi_host->this_id = eeprom->scsi_id;
4392 acb->hostid_bit = (1 << acb->scsi_host->this_id);
4393
4394 for (i = 0; i < DC395x_MAX_SCSI_ID; i++)
4395 acb->dcb_map[i] = 0;
4396
4397 acb->msg_len = 0;
4398
4399 /* link static array of srbs into the srb free list */
4400 for (i = 0; i < acb->srb_count - 1; i++)
4401 srb_free_insert(acb, &acb->srb_array[i]);
4402 }
4403
4404
4405 /**
4406 * adapter_init_host - Initialize the scsi host instance based on
4407 * values that we have already stored in the adapter instance. There's
4408 * some mention that a lot of these are deprecated, so we won't use
4409 * them (we'll use the ones in the adapter instance) but we'll fill
4410 * them in in case something else needs them.
4411 *
4412 * The eeprom structure, irq and io ports in the adapter need to have
4413 * been set before calling this function.
4414 *
4415 * @host: The scsi host instance to fill in the values for.
4416 **/
4417 static void adapter_init_scsi_host(struct Scsi_Host *host)
4418 {
4419 struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)host->hostdata;
4420 struct NvRamType *eeprom = &acb->eeprom;
4421
4422 host->max_cmd_len = 24;
4423 host->can_queue = DC395x_MAX_CMD_QUEUE;
4424 host->cmd_per_lun = DC395x_MAX_CMD_PER_LUN;
4425 host->this_id = (int)eeprom->scsi_id;
4426 host->io_port = acb->io_port_base;
4427 host->n_io_port = acb->io_port_len;
4428 host->dma_channel = -1;
4429 host->unique_id = acb->io_port_base;
4430 host->irq = acb->irq_level;
4431 acb->last_reset = jiffies;
4432
4433 host->max_id = 16;
4434 if (host->max_id - 1 == eeprom->scsi_id)
4435 host->max_id--;
4436
4437 #ifdef CONFIG_SCSI_MULTI_LUN
4438 if (eeprom->channel_cfg & NAC_SCANLUN)
4439 host->max_lun = 8;
4440 else
4441 host->max_lun = 1;
4442 #else
4443 host->max_lun = 1;
4444 #endif
4445
4446 }
4447
4448
4449 /**
4450 * adapter_init_chip - Get the chip into a know state and figure out
4451 * some of the settings that apply to this adapter.
4452 *
4453 * The io port in the adapter needs to have been set before calling
4454 * this function. The config will be configured correctly on return.
4455 *
4456 * @acb: The adapter which we are to init.
4457 **/
4458 static void adapter_init_chip(struct AdapterCtlBlk *acb)
4459 {
4460 struct NvRamType *eeprom = &acb->eeprom;
4461
4462 /* Mask all the interrupt */
4463 DC395x_write8(acb, TRM_S1040_DMA_INTEN, 0x00);
4464 DC395x_write8(acb, TRM_S1040_SCSI_INTEN, 0x00);
4465
4466 /* Reset SCSI module */
4467 DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_RSTMODULE);
4468
4469 /* Reset PCI/DMA module */
4470 DC395x_write8(acb, TRM_S1040_DMA_CONTROL, DMARESETMODULE);
4471 udelay(20);
4472
4473 /* program configuration 0 */
4474 acb->config = HCC_AUTOTERM | HCC_PARITY;
4475 if (DC395x_read8(acb, TRM_S1040_GEN_STATUS) & WIDESCSI)
4476 acb->config |= HCC_WIDE_CARD;
4477
4478 if (eeprom->channel_cfg & NAC_POWERON_SCSI_RESET)
4479 acb->config |= HCC_SCSI_RESET;
4480
4481 if (acb->config & HCC_SCSI_RESET) {
4482 dprintkl(KERN_INFO, "Performing initial SCSI bus reset\n");
4483 DC395x_write8(acb, TRM_S1040_SCSI_CONTROL, DO_RSTSCSI);
4484
4485 /*while (!( DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS) & INT_SCSIRESET )); */
4486 /*spin_unlock_irq (&io_request_lock); */
4487 udelay(500);
4488
4489 acb->last_reset =
4490 jiffies + HZ / 2 +
4491 HZ * acb->eeprom.delay_time;
4492
4493 /*spin_lock_irq (&io_request_lock); */
4494 }
4495 }
4496
4497
4498 /**
4499 * init_adapter - Grab the resource for the card, setup the adapter
4500 * information, set the card into a known state, create the various
4501 * tables etc etc. This basically gets all adapter information all up
4502 * to date, initialised and gets the chip in sync with it.
4503 *
4504 * @host: This hosts adapter structure
4505 * @io_port: The base I/O port
4506 * @irq: IRQ
4507 *
4508 * Returns 0 if the initialization succeeds, any other value on
4509 * failure.
4510 **/
4511 static int adapter_init(struct AdapterCtlBlk *acb, unsigned long io_port,
4512 u32 io_port_len, unsigned int irq)
4513 {
4514 if (!request_region(io_port, io_port_len, DC395X_NAME)) {
4515 dprintkl(KERN_ERR, "Failed to reserve IO region 0x%lx\n", io_port);
4516 goto failed;
4517 }
4518 /* store port base to indicate we have registered it */
4519 acb->io_port_base = io_port;
4520 acb->io_port_len = io_port_len;
4521
4522 if (request_irq(irq, dc395x_interrupt, IRQF_SHARED, DC395X_NAME, acb)) {
4523 /* release the region we just claimed */
4524 dprintkl(KERN_INFO, "Failed to register IRQ\n");
4525 goto failed;
4526 }
4527 /* store irq to indicate we have registered it */
4528 acb->irq_level = irq;
4529
4530 /* get eeprom configuration information and command line settings etc */
4531 check_eeprom(&acb->eeprom, io_port);
4532 print_eeprom_settings(&acb->eeprom);
4533
4534 /* setup adapter control block */
4535 adapter_init_params(acb);
4536
4537 /* display card connectors/termination settings */
4538 adapter_print_config(acb);
4539
4540 if (adapter_sg_tables_alloc(acb)) {
4541 dprintkl(KERN_DEBUG, "Memory allocation for SG tables failed\n");
4542 goto failed;
4543 }
4544 adapter_init_scsi_host(acb->scsi_host);
4545 adapter_init_chip(acb);
4546 set_basic_config(acb);
4547
4548 dprintkdbg(DBG_0,
4549 "adapter_init: acb=%p, pdcb_map=%p psrb_array=%p "
4550 "size{acb=0x%04x dcb=0x%04x srb=0x%04x}\n",
4551 acb, acb->dcb_map, acb->srb_array, sizeof(struct AdapterCtlBlk),
4552 sizeof(struct DeviceCtlBlk), sizeof(struct ScsiReqBlk));
4553 return 0;
4554
4555 failed:
4556 if (acb->irq_level)
4557 free_irq(acb->irq_level, acb);
4558 if (acb->io_port_base)
4559 release_region(acb->io_port_base, acb->io_port_len);
4560 adapter_sg_tables_free(acb);
4561
4562 return 1;
4563 }
4564
4565
4566 /**
4567 * adapter_uninit_chip - cleanly shut down the scsi controller chip,
4568 * stopping all operations and disabling interrupt generation on the
4569 * card.
4570 *
4571 * @acb: The adapter which we are to shutdown.
4572 **/
4573 static void adapter_uninit_chip(struct AdapterCtlBlk *acb)
4574 {
4575 /* disable interrupts */
4576 DC395x_write8(acb, TRM_S1040_DMA_INTEN, 0);
4577 DC395x_write8(acb, TRM_S1040_SCSI_INTEN, 0);
4578
4579 /* reset the scsi bus */
4580 if (acb->config & HCC_SCSI_RESET)
4581 reset_scsi_bus(acb);
4582
4583 /* clear any pending interrupt state */
4584 DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
4585 }
4586
4587
4588
4589 /**
4590 * adapter_uninit - Shut down the chip and release any resources that
4591 * we had allocated. Once this returns the adapter should not be used
4592 * anymore.
4593 *
4594 * @acb: The adapter which we are to un-initialize.
4595 **/
4596 static void adapter_uninit(struct AdapterCtlBlk *acb)
4597 {
4598 unsigned long flags;
4599 DC395x_LOCK_IO(acb->scsi_host, flags);
4600
4601 /* remove timers */
4602 if (timer_pending(&acb->waiting_timer))
4603 del_timer(&acb->waiting_timer);
4604 if (timer_pending(&acb->selto_timer))
4605 del_timer(&acb->selto_timer);
4606
4607 adapter_uninit_chip(acb);
4608 adapter_remove_and_free_all_devices(acb);
4609 DC395x_UNLOCK_IO(acb->scsi_host, flags);
4610
4611 if (acb->irq_level)
4612 free_irq(acb->irq_level, acb);
4613 if (acb->io_port_base)
4614 release_region(acb->io_port_base, acb->io_port_len);
4615
4616 adapter_sg_tables_free(acb);
4617 }
4618
4619
4620 #undef SPRINTF
4621 #define SPRINTF(args...) seq_printf(m,##args)
4622
4623 #undef YESNO
4624 #define YESNO(YN) \
4625 if (YN) SPRINTF(" Yes ");\
4626 else SPRINTF(" No ")
4627
4628 static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host)
4629 {
4630 struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)host->hostdata;
4631 int spd, spd1;
4632 struct DeviceCtlBlk *dcb;
4633 unsigned long flags;
4634 int dev;
4635
4636 SPRINTF(DC395X_BANNER " PCI SCSI Host Adapter\n");
4637 SPRINTF(" Driver Version " DC395X_VERSION "\n");
4638
4639 DC395x_LOCK_IO(acb->scsi_host, flags);
4640
4641 SPRINTF("SCSI Host Nr %i, ", host->host_no);
4642 SPRINTF("DC395U/UW/F DC315/U %s\n",
4643 (acb->config & HCC_WIDE_CARD) ? "Wide" : "");
4644 SPRINTF("io_port_base 0x%04lx, ", acb->io_port_base);
4645 SPRINTF("irq_level 0x%04x, ", acb->irq_level);
4646 SPRINTF(" SelTimeout %ims\n", (1638 * acb->sel_timeout) / 1000);
4647
4648 SPRINTF("MaxID %i, MaxLUN %i, ", host->max_id, host->max_lun);
4649 SPRINTF("AdapterID %i\n", host->this_id);
4650
4651 SPRINTF("tag_max_num %i", acb->tag_max_num);
4652 /*SPRINTF(", DMA_Status %i\n", DC395x_read8(acb, TRM_S1040_DMA_STATUS)); */
4653 SPRINTF(", FilterCfg 0x%02x",
4654 DC395x_read8(acb, TRM_S1040_SCSI_CONFIG1));
4655 SPRINTF(", DelayReset %is\n", acb->eeprom.delay_time);
4656 /*SPRINTF("\n"); */
4657
4658 SPRINTF("Nr of DCBs: %i\n", list_size(&acb->dcb_list));
4659 SPRINTF
4660 ("Map of attached LUNs: %02x %02x %02x %02x %02x %02x %02x %02x\n",
4661 acb->dcb_map[0], acb->dcb_map[1], acb->dcb_map[2],
4662 acb->dcb_map[3], acb->dcb_map[4], acb->dcb_map[5],
4663 acb->dcb_map[6], acb->dcb_map[7]);
4664 SPRINTF
4665 (" %02x %02x %02x %02x %02x %02x %02x %02x\n",
4666 acb->dcb_map[8], acb->dcb_map[9], acb->dcb_map[10],
4667 acb->dcb_map[11], acb->dcb_map[12], acb->dcb_map[13],
4668 acb->dcb_map[14], acb->dcb_map[15]);
4669
4670 SPRINTF
4671 ("Un ID LUN Prty Sync Wide DsCn SndS TagQ nego_period SyncFreq SyncOffs MaxCmd\n");
4672
4673 dev = 0;
4674 list_for_each_entry(dcb, &acb->dcb_list, list) {
4675 int nego_period;
4676 SPRINTF("%02i %02i %02i ", dev, dcb->target_id,
4677 dcb->target_lun);
4678 YESNO(dcb->dev_mode & NTC_DO_PARITY_CHK);
4679 YESNO(dcb->sync_offset);
4680 YESNO(dcb->sync_period & WIDE_SYNC);
4681 YESNO(dcb->dev_mode & NTC_DO_DISCONNECT);
4682 YESNO(dcb->dev_mode & NTC_DO_SEND_START);
4683 YESNO(dcb->sync_mode & EN_TAG_QUEUEING);
4684 nego_period = clock_period[dcb->sync_period & 0x07] << 2;
4685 if (dcb->sync_offset)
4686 SPRINTF(" %03i ns ", nego_period);
4687 else
4688 SPRINTF(" (%03i ns)", (dcb->min_nego_period << 2));
4689
4690 if (dcb->sync_offset & 0x0f) {
4691 spd = 1000 / (nego_period);
4692 spd1 = 1000 % (nego_period);
4693 spd1 = (spd1 * 10 + nego_period / 2) / (nego_period);
4694 SPRINTF(" %2i.%1i M %02i ", spd, spd1,
4695 (dcb->sync_offset & 0x0f));
4696 } else
4697 SPRINTF(" ");
4698
4699 /* Add more info ... */
4700 SPRINTF(" %02i\n", dcb->max_command);
4701 dev++;
4702 }
4703
4704 if (timer_pending(&acb->waiting_timer))
4705 SPRINTF("Waiting queue timer running\n");
4706 else
4707 SPRINTF("\n");
4708
4709 list_for_each_entry(dcb, &acb->dcb_list, list) {
4710 struct ScsiReqBlk *srb;
4711 if (!list_empty(&dcb->srb_waiting_list))
4712 SPRINTF("DCB (%02i-%i): Waiting: %i:",
4713 dcb->target_id, dcb->target_lun,
4714 list_size(&dcb->srb_waiting_list));
4715 list_for_each_entry(srb, &dcb->srb_waiting_list, list)
4716 SPRINTF(" %p", srb->cmd);
4717 if (!list_empty(&dcb->srb_going_list))
4718 SPRINTF("\nDCB (%02i-%i): Going : %i:",
4719 dcb->target_id, dcb->target_lun,
4720 list_size(&dcb->srb_going_list));
4721 list_for_each_entry(srb, &dcb->srb_going_list, list)
4722 SPRINTF(" %p", srb->cmd);
4723 if (!list_empty(&dcb->srb_waiting_list) || !list_empty(&dcb->srb_going_list))
4724 SPRINTF("\n");
4725 }
4726
4727 if (debug_enabled(DBG_1)) {
4728 SPRINTF("DCB list for ACB %p:\n", acb);
4729 list_for_each_entry(dcb, &acb->dcb_list, list) {
4730 SPRINTF("%p -> ", dcb);
4731 }
4732 SPRINTF("END\n");
4733 }
4734
4735 DC395x_UNLOCK_IO(acb->scsi_host, flags);
4736 return 0;
4737 }
4738
4739
4740 static struct scsi_host_template dc395x_driver_template = {
4741 .module = THIS_MODULE,
4742 .proc_name = DC395X_NAME,
4743 .show_info = dc395x_show_info,
4744 .name = DC395X_BANNER " " DC395X_VERSION,
4745 .queuecommand = dc395x_queue_command,
4746 .bios_param = dc395x_bios_param,
4747 .slave_alloc = dc395x_slave_alloc,
4748 .slave_destroy = dc395x_slave_destroy,
4749 .can_queue = DC395x_MAX_CAN_QUEUE,
4750 .this_id = 7,
4751 .sg_tablesize = DC395x_MAX_SG_TABLESIZE,
4752 .cmd_per_lun = DC395x_MAX_CMD_PER_LUN,
4753 .eh_abort_handler = dc395x_eh_abort,
4754 .eh_bus_reset_handler = dc395x_eh_bus_reset,
4755 .use_clustering = DISABLE_CLUSTERING,
4756 };
4757
4758
4759 /**
4760 * banner_display - Display banner on first instance of driver
4761 * initialized.
4762 **/
4763 static void banner_display(void)
4764 {
4765 static int banner_done = 0;
4766 if (!banner_done)
4767 {
4768 dprintkl(KERN_INFO, "%s %s\n", DC395X_BANNER, DC395X_VERSION);
4769 banner_done = 1;
4770 }
4771 }
4772
4773
4774 /**
4775 * dc395x_init_one - Initialise a single instance of the adapter.
4776 *
4777 * The PCI layer will call this once for each instance of the adapter
4778 * that it finds in the system. The pci_dev strcuture indicates which
4779 * instance we are being called from.
4780 *
4781 * @dev: The PCI device to initialize.
4782 * @id: Looks like a pointer to the entry in our pci device table
4783 * that was actually matched by the PCI subsystem.
4784 *
4785 * Returns 0 on success, or an error code (-ve) on failure.
4786 **/
4787 static int dc395x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
4788 {
4789 struct Scsi_Host *scsi_host = NULL;
4790 struct AdapterCtlBlk *acb = NULL;
4791 unsigned long io_port_base;
4792 unsigned int io_port_len;
4793 unsigned int irq;
4794
4795 dprintkdbg(DBG_0, "Init one instance (%s)\n", pci_name(dev));
4796 banner_display();
4797
4798 if (pci_enable_device(dev))
4799 {
4800 dprintkl(KERN_INFO, "PCI Enable device failed.\n");
4801 return -ENODEV;
4802 }
4803 io_port_base = pci_resource_start(dev, 0) & PCI_BASE_ADDRESS_IO_MASK;
4804 io_port_len = pci_resource_len(dev, 0);
4805 irq = dev->irq;
4806 dprintkdbg(DBG_0, "IO_PORT=0x%04lx, IRQ=0x%x\n", io_port_base, dev->irq);
4807
4808 /* allocate scsi host information (includes out adapter) */
4809 scsi_host = scsi_host_alloc(&dc395x_driver_template,
4810 sizeof(struct AdapterCtlBlk));
4811 if (!scsi_host) {
4812 dprintkl(KERN_INFO, "scsi_host_alloc failed\n");
4813 goto fail;
4814 }
4815 acb = (struct AdapterCtlBlk*)scsi_host->hostdata;
4816 acb->scsi_host = scsi_host;
4817 acb->dev = dev;
4818
4819 /* initialise the adapter and everything we need */
4820 if (adapter_init(acb, io_port_base, io_port_len, irq)) {
4821 dprintkl(KERN_INFO, "adapter init failed\n");
4822 goto fail;
4823 }
4824
4825 pci_set_master(dev);
4826
4827 /* get the scsi mid level to scan for new devices on the bus */
4828 if (scsi_add_host(scsi_host, &dev->dev)) {
4829 dprintkl(KERN_ERR, "scsi_add_host failed\n");
4830 goto fail;
4831 }
4832 pci_set_drvdata(dev, scsi_host);
4833 scsi_scan_host(scsi_host);
4834
4835 return 0;
4836
4837 fail:
4838 if (acb != NULL)
4839 adapter_uninit(acb);
4840 if (scsi_host != NULL)
4841 scsi_host_put(scsi_host);
4842 pci_disable_device(dev);
4843 return -ENODEV;
4844 }
4845
4846
4847 /**
4848 * dc395x_remove_one - Called to remove a single instance of the
4849 * adapter.
4850 *
4851 * @dev: The PCI device to initialize.
4852 **/
4853 static void dc395x_remove_one(struct pci_dev *dev)
4854 {
4855 struct Scsi_Host *scsi_host = pci_get_drvdata(dev);
4856 struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)(scsi_host->hostdata);
4857
4858 dprintkdbg(DBG_0, "dc395x_remove_one: acb=%p\n", acb);
4859
4860 scsi_remove_host(scsi_host);
4861 adapter_uninit(acb);
4862 pci_disable_device(dev);
4863 scsi_host_put(scsi_host);
4864 }
4865
4866
4867 static struct pci_device_id dc395x_pci_table[] = {
4868 {
4869 .vendor = PCI_VENDOR_ID_TEKRAM,
4870 .device = PCI_DEVICE_ID_TEKRAM_TRMS1040,
4871 .subvendor = PCI_ANY_ID,
4872 .subdevice = PCI_ANY_ID,
4873 },
4874 {} /* Terminating entry */
4875 };
4876 MODULE_DEVICE_TABLE(pci, dc395x_pci_table);
4877
4878
4879 static struct pci_driver dc395x_driver = {
4880 .name = DC395X_NAME,
4881 .id_table = dc395x_pci_table,
4882 .probe = dc395x_init_one,
4883 .remove = dc395x_remove_one,
4884 };
4885
4886
4887 /**
4888 * dc395x_module_init - Module initialization function
4889 *
4890 * Used by both module and built-in driver to initialise this driver.
4891 **/
4892 static int __init dc395x_module_init(void)
4893 {
4894 return pci_register_driver(&dc395x_driver);
4895 }
4896
4897
4898 /**
4899 * dc395x_module_exit - Module cleanup function.
4900 **/
4901 static void __exit dc395x_module_exit(void)
4902 {
4903 pci_unregister_driver(&dc395x_driver);
4904 }
4905
4906
4907 module_init(dc395x_module_init);
4908 module_exit(dc395x_module_exit);
4909
4910 MODULE_AUTHOR("C.L. Huang / Erich Chen / Kurt Garloff");
4911 MODULE_DESCRIPTION("SCSI host adapter driver for Tekram TRM-S1040 based adapters: Tekram DC395 and DC315 series");
4912 MODULE_LICENSE("GPL");
Linux with added FPC-III support