?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ath9k: fix a tx rate duration calculation bug
[linux/fpc-iii.git] / drivers / ssb / main.c
blobbb6317fb925ce922908e0053e9acc740cc7fe541
1 /*
2 * Sonics Silicon Backplane
3 * Subsystem core
4 *
5 * Copyright 2005, Broadcom Corporation
6 * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
7 *
8 * Licensed under the GNU/GPL. See COPYING for details.
9 */
10
11 #include "ssb_private.h"
12
13 #include <linux/delay.h>
14 #include <linux/io.h>
15 #include <linux/module.h>
16 #include <linux/ssb/ssb.h>
17 #include <linux/ssb/ssb_regs.h>
18 #include <linux/ssb/ssb_driver_gige.h>
19 #include <linux/dma-mapping.h>
20 #include <linux/pci.h>
21 #include <linux/mmc/sdio_func.h>
22 #include <linux/slab.h>
23
24 #include <pcmcia/cistpl.h>
25 #include <pcmcia/ds.h>
26
27
28 MODULE_DESCRIPTION("Sonics Silicon Backplane driver");
29 MODULE_LICENSE("GPL");
30
31
32 /* Temporary list of yet-to-be-attached buses */
33 static LIST_HEAD(attach_queue);
34 /* List if running buses */
35 static LIST_HEAD(buses);
36 /* Software ID counter */
37 static unsigned int next_busnumber;
38 /* buses_mutes locks the two buslists and the next_busnumber.
39 * Don't lock this directly, but use ssb_buses_[un]lock() below. */
40 static DEFINE_MUTEX(buses_mutex);
41
42 /* There are differences in the codeflow, if the bus is
43 * initialized from early boot, as various needed services
44 * are not available early. This is a mechanism to delay
45 * these initializations to after early boot has finished.
46 * It's also used to avoid mutex locking, as that's not
47 * available and needed early. */
48 static bool ssb_is_early_boot = 1;
49
50 static void ssb_buses_lock(void);
51 static void ssb_buses_unlock(void);
52
53
54 #ifdef CONFIG_SSB_PCIHOST
55 struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev)
56 {
57 struct ssb_bus *bus;
58
59 ssb_buses_lock();
60 list_for_each_entry(bus, &buses, list) {
61 if (bus->bustype == SSB_BUSTYPE_PCI &&
62 bus->host_pci == pdev)
63 goto found;
64 }
65 bus = NULL;
66 found:
67 ssb_buses_unlock();
68
69 return bus;
70 }
71 #endif /* CONFIG_SSB_PCIHOST */
72
73 #ifdef CONFIG_SSB_PCMCIAHOST
74 struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev)
75 {
76 struct ssb_bus *bus;
77
78 ssb_buses_lock();
79 list_for_each_entry(bus, &buses, list) {
80 if (bus->bustype == SSB_BUSTYPE_PCMCIA &&
81 bus->host_pcmcia == pdev)
82 goto found;
83 }
84 bus = NULL;
85 found:
86 ssb_buses_unlock();
87
88 return bus;
89 }
90 #endif /* CONFIG_SSB_PCMCIAHOST */
91
92 #ifdef CONFIG_SSB_SDIOHOST
93 struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
94 {
95 struct ssb_bus *bus;
96
97 ssb_buses_lock();
98 list_for_each_entry(bus, &buses, list) {
99 if (bus->bustype == SSB_BUSTYPE_SDIO &&
100 bus->host_sdio == func)
101 goto found;
102 }
103 bus = NULL;
104 found:
105 ssb_buses_unlock();
106
107 return bus;
108 }
109 #endif /* CONFIG_SSB_SDIOHOST */
110
111 int ssb_for_each_bus_call(unsigned long data,
112 int (*func)(struct ssb_bus *bus, unsigned long data))
113 {
114 struct ssb_bus *bus;
115 int res;
116
117 ssb_buses_lock();
118 list_for_each_entry(bus, &buses, list) {
119 res = func(bus, data);
120 if (res >= 0) {
121 ssb_buses_unlock();
122 return res;
123 }
124 }
125 ssb_buses_unlock();
126
127 return -ENODEV;
128 }
129
130 static struct ssb_device *ssb_device_get(struct ssb_device *dev)
131 {
132 if (dev)
133 get_device(dev->dev);
134 return dev;
135 }
136
137 static void ssb_device_put(struct ssb_device *dev)
138 {
139 if (dev)
140 put_device(dev->dev);
141 }
142
143 static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
144 {
145 if (drv)
146 get_driver(&drv->drv);
147 return drv;
148 }
149
150 static inline void ssb_driver_put(struct ssb_driver *drv)
151 {
152 if (drv)
153 put_driver(&drv->drv);
154 }
155
156 static int ssb_device_resume(struct device *dev)
157 {
158 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
159 struct ssb_driver *ssb_drv;
160 int err = 0;
161
162 if (dev->driver) {
163 ssb_drv = drv_to_ssb_drv(dev->driver);
164 if (ssb_drv && ssb_drv->resume)
165 err = ssb_drv->resume(ssb_dev);
166 if (err)
167 goto out;
168 }
169 out:
170 return err;
171 }
172
173 static int ssb_device_suspend(struct device *dev, pm_message_t state)
174 {
175 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
176 struct ssb_driver *ssb_drv;
177 int err = 0;
178
179 if (dev->driver) {
180 ssb_drv = drv_to_ssb_drv(dev->driver);
181 if (ssb_drv && ssb_drv->suspend)
182 err = ssb_drv->suspend(ssb_dev, state);
183 if (err)
184 goto out;
185 }
186 out:
187 return err;
188 }
189
190 int ssb_bus_resume(struct ssb_bus *bus)
191 {
192 int err;
193
194 /* Reset HW state information in memory, so that HW is
195 * completely reinitialized. */
196 bus->mapped_device = NULL;
197 #ifdef CONFIG_SSB_DRIVER_PCICORE
198 bus->pcicore.setup_done = 0;
199 #endif
200
201 err = ssb_bus_powerup(bus, 0);
202 if (err)
203 return err;
204 err = ssb_pcmcia_hardware_setup(bus);
205 if (err) {
206 ssb_bus_may_powerdown(bus);
207 return err;
208 }
209 ssb_chipco_resume(&bus->chipco);
210 ssb_bus_may_powerdown(bus);
211
212 return 0;
213 }
214 EXPORT_SYMBOL(ssb_bus_resume);
215
216 int ssb_bus_suspend(struct ssb_bus *bus)
217 {
218 ssb_chipco_suspend(&bus->chipco);
219 ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
220
221 return 0;
222 }
223 EXPORT_SYMBOL(ssb_bus_suspend);
224
225 #ifdef CONFIG_SSB_SPROM
226 /** ssb_devices_freeze - Freeze all devices on the bus.
227 *
228 * After freezing no device driver will be handling a device
229 * on this bus anymore. ssb_devices_thaw() must be called after
230 * a successful freeze to reactivate the devices.
231 *
232 * @bus: The bus.
233 * @ctx: Context structure. Pass this to ssb_devices_thaw().
234 */
235 int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
236 {
237 struct ssb_device *sdev;
238 struct ssb_driver *sdrv;
239 unsigned int i;
240
241 memset(ctx, 0, sizeof(*ctx));
242 ctx->bus = bus;
243 SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
244
245 for (i = 0; i < bus->nr_devices; i++) {
246 sdev = ssb_device_get(&bus->devices[i]);
247
248 if (!sdev->dev || !sdev->dev->driver ||
249 !device_is_registered(sdev->dev)) {
250 ssb_device_put(sdev);
251 continue;
252 }
253 sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
254 if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
255 ssb_device_put(sdev);
256 continue;
257 }
258 sdrv->remove(sdev);
259 ctx->device_frozen[i] = 1;
260 }
261
262 return 0;
263 }
264
265 /** ssb_devices_thaw - Unfreeze all devices on the bus.
266 *
267 * This will re-attach the device drivers and re-init the devices.
268 *
269 * @ctx: The context structure from ssb_devices_freeze()
270 */
271 int ssb_devices_thaw(struct ssb_freeze_context *ctx)
272 {
273 struct ssb_bus *bus = ctx->bus;
274 struct ssb_device *sdev;
275 struct ssb_driver *sdrv;
276 unsigned int i;
277 int err, result = 0;
278
279 for (i = 0; i < bus->nr_devices; i++) {
280 if (!ctx->device_frozen[i])
281 continue;
282 sdev = &bus->devices[i];
283
284 if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
285 continue;
286 sdrv = drv_to_ssb_drv(sdev->dev->driver);
287 if (SSB_WARN_ON(!sdrv || !sdrv->probe))
288 continue;
289
290 err = sdrv->probe(sdev, &sdev->id);
291 if (err) {
292 ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
293 dev_name(sdev->dev));
294 result = err;
295 }
296 ssb_driver_put(sdrv);
297 ssb_device_put(sdev);
298 }
299
300 return result;
301 }
302 #endif /* CONFIG_SSB_SPROM */
303
304 static void ssb_device_shutdown(struct device *dev)
305 {
306 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
307 struct ssb_driver *ssb_drv;
308
309 if (!dev->driver)
310 return;
311 ssb_drv = drv_to_ssb_drv(dev->driver);
312 if (ssb_drv && ssb_drv->shutdown)
313 ssb_drv->shutdown(ssb_dev);
314 }
315
316 static int ssb_device_remove(struct device *dev)
317 {
318 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
319 struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
320
321 if (ssb_drv && ssb_drv->remove)
322 ssb_drv->remove(ssb_dev);
323 ssb_device_put(ssb_dev);
324
325 return 0;
326 }
327
328 static int ssb_device_probe(struct device *dev)
329 {
330 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
331 struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
332 int err = 0;
333
334 ssb_device_get(ssb_dev);
335 if (ssb_drv && ssb_drv->probe)
336 err = ssb_drv->probe(ssb_dev, &ssb_dev->id);
337 if (err)
338 ssb_device_put(ssb_dev);
339
340 return err;
341 }
342
343 static int ssb_match_devid(const struct ssb_device_id *tabid,
344 const struct ssb_device_id *devid)
345 {
346 if ((tabid->vendor != devid->vendor) &&
347 tabid->vendor != SSB_ANY_VENDOR)
348 return 0;
349 if ((tabid->coreid != devid->coreid) &&
350 tabid->coreid != SSB_ANY_ID)
351 return 0;
352 if ((tabid->revision != devid->revision) &&
353 tabid->revision != SSB_ANY_REV)
354 return 0;
355 return 1;
356 }
357
358 static int ssb_bus_match(struct device *dev, struct device_driver *drv)
359 {
360 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
361 struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv);
362 const struct ssb_device_id *id;
363
364 for (id = ssb_drv->id_table;
365 id->vendor || id->coreid || id->revision;
366 id++) {
367 if (ssb_match_devid(id, &ssb_dev->id))
368 return 1; /* found */
369 }
370
371 return 0;
372 }
373
374 static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env)
375 {
376 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
377
378 if (!dev)
379 return -ENODEV;
380
381 return add_uevent_var(env,
382 "MODALIAS=ssb:v%04Xid%04Xrev%02X",
383 ssb_dev->id.vendor, ssb_dev->id.coreid,
384 ssb_dev->id.revision);
385 }
386
387 #define ssb_config_attr(attrib, field, format_string) \
388 static ssize_t \
389 attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
390 { \
391 return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
392 }
393
394 ssb_config_attr(core_num, core_index, "%u\n")
395 ssb_config_attr(coreid, id.coreid, "0x%04x\n")
396 ssb_config_attr(vendor, id.vendor, "0x%04x\n")
397 ssb_config_attr(revision, id.revision, "%u\n")
398 ssb_config_attr(irq, irq, "%u\n")
399 static ssize_t
400 name_show(struct device *dev, struct device_attribute *attr, char *buf)
401 {
402 return sprintf(buf, "%s\n",
403 ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
404 }
405
406 static struct device_attribute ssb_device_attrs[] = {
407 __ATTR_RO(name),
408 __ATTR_RO(core_num),
409 __ATTR_RO(coreid),
410 __ATTR_RO(vendor),
411 __ATTR_RO(revision),
412 __ATTR_RO(irq),
413 __ATTR_NULL,
414 };
415
416 static struct bus_type ssb_bustype = {
417 .name = "ssb",
418 .match = ssb_bus_match,
419 .probe = ssb_device_probe,
420 .remove = ssb_device_remove,
421 .shutdown = ssb_device_shutdown,
422 .suspend = ssb_device_suspend,
423 .resume = ssb_device_resume,
424 .uevent = ssb_device_uevent,
425 .dev_attrs = ssb_device_attrs,
426 };
427
428 static void ssb_buses_lock(void)
429 {
430 /* See the comment at the ssb_is_early_boot definition */
431 if (!ssb_is_early_boot)
432 mutex_lock(&buses_mutex);
433 }
434
435 static void ssb_buses_unlock(void)
436 {
437 /* See the comment at the ssb_is_early_boot definition */
438 if (!ssb_is_early_boot)
439 mutex_unlock(&buses_mutex);
440 }
441
442 static void ssb_devices_unregister(struct ssb_bus *bus)
443 {
444 struct ssb_device *sdev;
445 int i;
446
447 for (i = bus->nr_devices - 1; i >= 0; i--) {
448 sdev = &(bus->devices[i]);
449 if (sdev->dev)
450 device_unregister(sdev->dev);
451 }
452 }
453
454 void ssb_bus_unregister(struct ssb_bus *bus)
455 {
456 ssb_buses_lock();
457 ssb_devices_unregister(bus);
458 list_del(&bus->list);
459 ssb_buses_unlock();
460
461 ssb_pcmcia_exit(bus);
462 ssb_pci_exit(bus);
463 ssb_iounmap(bus);
464 }
465 EXPORT_SYMBOL(ssb_bus_unregister);
466
467 static void ssb_release_dev(struct device *dev)
468 {
469 struct __ssb_dev_wrapper *devwrap;
470
471 devwrap = container_of(dev, struct __ssb_dev_wrapper, dev);
472 kfree(devwrap);
473 }
474
475 static int ssb_devices_register(struct ssb_bus *bus)
476 {
477 struct ssb_device *sdev;
478 struct device *dev;
479 struct __ssb_dev_wrapper *devwrap;
480 int i, err = 0;
481 int dev_idx = 0;
482
483 for (i = 0; i < bus->nr_devices; i++) {
484 sdev = &(bus->devices[i]);
485
486 /* We don't register SSB-system devices to the kernel,
487 * as the drivers for them are built into SSB. */
488 switch (sdev->id.coreid) {
489 case SSB_DEV_CHIPCOMMON:
490 case SSB_DEV_PCI:
491 case SSB_DEV_PCIE:
492 case SSB_DEV_PCMCIA:
493 case SSB_DEV_MIPS:
494 case SSB_DEV_MIPS_3302:
495 case SSB_DEV_EXTIF:
496 continue;
497 }
498
499 devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
500 if (!devwrap) {
501 ssb_printk(KERN_ERR PFX
502 "Could not allocate device\n");
503 err = -ENOMEM;
504 goto error;
505 }
506 dev = &devwrap->dev;
507 devwrap->sdev = sdev;
508
509 dev->release = ssb_release_dev;
510 dev->bus = &ssb_bustype;
511 dev_set_name(dev, "ssb%u:%d", bus->busnumber, dev_idx);
512
513 switch (bus->bustype) {
514 case SSB_BUSTYPE_PCI:
515 #ifdef CONFIG_SSB_PCIHOST
516 sdev->irq = bus->host_pci->irq;
517 dev->parent = &bus->host_pci->dev;
518 sdev->dma_dev = dev->parent;
519 #endif
520 break;
521 case SSB_BUSTYPE_PCMCIA:
522 #ifdef CONFIG_SSB_PCMCIAHOST
523 sdev->irq = bus->host_pcmcia->irq;
524 dev->parent = &bus->host_pcmcia->dev;
525 #endif
526 break;
527 case SSB_BUSTYPE_SDIO:
528 #ifdef CONFIG_SSB_SDIOHOST
529 dev->parent = &bus->host_sdio->dev;
530 #endif
531 break;
532 case SSB_BUSTYPE_SSB:
533 dev->dma_mask = &dev->coherent_dma_mask;
534 sdev->dma_dev = dev;
535 break;
536 }
537
538 sdev->dev = dev;
539 err = device_register(dev);
540 if (err) {
541 ssb_printk(KERN_ERR PFX
542 "Could not register %s\n",
543 dev_name(dev));
544 /* Set dev to NULL to not unregister
545 * dev on error unwinding. */
546 sdev->dev = NULL;
547 kfree(devwrap);
548 goto error;
549 }
550 dev_idx++;
551 }
552
553 return 0;
554 error:
555 /* Unwind the already registered devices. */
556 ssb_devices_unregister(bus);
557 return err;
558 }
559
560 /* Needs ssb_buses_lock() */
561 static int __devinit ssb_attach_queued_buses(void)
562 {
563 struct ssb_bus *bus, *n;
564 int err = 0;
565 int drop_them_all = 0;
566
567 list_for_each_entry_safe(bus, n, &attach_queue, list) {
568 if (drop_them_all) {
569 list_del(&bus->list);
570 continue;
571 }
572 /* Can't init the PCIcore in ssb_bus_register(), as that
573 * is too early in boot for embedded systems
574 * (no udelay() available). So do it here in attach stage.
575 */
576 err = ssb_bus_powerup(bus, 0);
577 if (err)
578 goto error;
579 ssb_pcicore_init(&bus->pcicore);
580 ssb_bus_may_powerdown(bus);
581
582 err = ssb_devices_register(bus);
583 error:
584 if (err) {
585 drop_them_all = 1;
586 list_del(&bus->list);
587 continue;
588 }
589 list_move_tail(&bus->list, &buses);
590 }
591
592 return err;
593 }
594
595 static u8 ssb_ssb_read8(struct ssb_device *dev, u16 offset)
596 {
597 struct ssb_bus *bus = dev->bus;
598
599 offset += dev->core_index * SSB_CORE_SIZE;
600 return readb(bus->mmio + offset);
601 }
602
603 static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
604 {
605 struct ssb_bus *bus = dev->bus;
606
607 offset += dev->core_index * SSB_CORE_SIZE;
608 return readw(bus->mmio + offset);
609 }
610
611 static u32 ssb_ssb_read32(struct ssb_device *dev, u16 offset)
612 {
613 struct ssb_bus *bus = dev->bus;
614
615 offset += dev->core_index * SSB_CORE_SIZE;
616 return readl(bus->mmio + offset);
617 }
618
619 #ifdef CONFIG_SSB_BLOCKIO
620 static void ssb_ssb_block_read(struct ssb_device *dev, void *buffer,
621 size_t count, u16 offset, u8 reg_width)
622 {
623 struct ssb_bus *bus = dev->bus;
624 void __iomem *addr;
625
626 offset += dev->core_index * SSB_CORE_SIZE;
627 addr = bus->mmio + offset;
628
629 switch (reg_width) {
630 case sizeof(u8): {
631 u8 *buf = buffer;
632
633 while (count) {
634 *buf = __raw_readb(addr);
635 buf++;
636 count--;
637 }
638 break;
639 }
640 case sizeof(u16): {
641 __le16 *buf = buffer;
642
643 SSB_WARN_ON(count & 1);
644 while (count) {
645 *buf = (__force __le16)__raw_readw(addr);
646 buf++;
647 count -= 2;
648 }
649 break;
650 }
651 case sizeof(u32): {
652 __le32 *buf = buffer;
653
654 SSB_WARN_ON(count & 3);
655 while (count) {
656 *buf = (__force __le32)__raw_readl(addr);
657 buf++;
658 count -= 4;
659 }
660 break;
661 }
662 default:
663 SSB_WARN_ON(1);
664 }
665 }
666 #endif /* CONFIG_SSB_BLOCKIO */
667
668 static void ssb_ssb_write8(struct ssb_device *dev, u16 offset, u8 value)
669 {
670 struct ssb_bus *bus = dev->bus;
671
672 offset += dev->core_index * SSB_CORE_SIZE;
673 writeb(value, bus->mmio + offset);
674 }
675
676 static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
677 {
678 struct ssb_bus *bus = dev->bus;
679
680 offset += dev->core_index * SSB_CORE_SIZE;
681 writew(value, bus->mmio + offset);
682 }
683
684 static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
685 {
686 struct ssb_bus *bus = dev->bus;
687
688 offset += dev->core_index * SSB_CORE_SIZE;
689 writel(value, bus->mmio + offset);
690 }
691
692 #ifdef CONFIG_SSB_BLOCKIO
693 static void ssb_ssb_block_write(struct ssb_device *dev, const void *buffer,
694 size_t count, u16 offset, u8 reg_width)
695 {
696 struct ssb_bus *bus = dev->bus;
697 void __iomem *addr;
698
699 offset += dev->core_index * SSB_CORE_SIZE;
700 addr = bus->mmio + offset;
701
702 switch (reg_width) {
703 case sizeof(u8): {
704 const u8 *buf = buffer;
705
706 while (count) {
707 __raw_writeb(*buf, addr);
708 buf++;
709 count--;
710 }
711 break;
712 }
713 case sizeof(u16): {
714 const __le16 *buf = buffer;
715
716 SSB_WARN_ON(count & 1);
717 while (count) {
718 __raw_writew((__force u16)(*buf), addr);
719 buf++;
720 count -= 2;
721 }
722 break;
723 }
724 case sizeof(u32): {
725 const __le32 *buf = buffer;
726
727 SSB_WARN_ON(count & 3);
728 while (count) {
729 __raw_writel((__force u32)(*buf), addr);
730 buf++;
731 count -= 4;
732 }
733 break;
734 }
735 default:
736 SSB_WARN_ON(1);
737 }
738 }
739 #endif /* CONFIG_SSB_BLOCKIO */
740
741 /* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
742 static const struct ssb_bus_ops ssb_ssb_ops = {
743 .read8 = ssb_ssb_read8,
744 .read16 = ssb_ssb_read16,
745 .read32 = ssb_ssb_read32,
746 .write8 = ssb_ssb_write8,
747 .write16 = ssb_ssb_write16,
748 .write32 = ssb_ssb_write32,
749 #ifdef CONFIG_SSB_BLOCKIO
750 .block_read = ssb_ssb_block_read,
751 .block_write = ssb_ssb_block_write,
752 #endif
753 };
754
755 static int ssb_fetch_invariants(struct ssb_bus *bus,
756 ssb_invariants_func_t get_invariants)
757 {
758 struct ssb_init_invariants iv;
759 int err;
760
761 memset(&iv, 0, sizeof(iv));
762 err = get_invariants(bus, &iv);
763 if (err)
764 goto out;
765 memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
766 memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
767 bus->has_cardbus_slot = iv.has_cardbus_slot;
768 out:
769 return err;
770 }
771
772 static int __devinit ssb_bus_register(struct ssb_bus *bus,
773 ssb_invariants_func_t get_invariants,
774 unsigned long baseaddr)
775 {
776 int err;
777
778 spin_lock_init(&bus->bar_lock);
779 INIT_LIST_HEAD(&bus->list);
780 #ifdef CONFIG_SSB_EMBEDDED
781 spin_lock_init(&bus->gpio_lock);
782 #endif
783
784 /* Powerup the bus */
785 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
786 if (err)
787 goto out;
788
789 /* Init SDIO-host device (if any), before the scan */
790 err = ssb_sdio_init(bus);
791 if (err)
792 goto err_disable_xtal;
793
794 ssb_buses_lock();
795 bus->busnumber = next_busnumber;
796 /* Scan for devices (cores) */
797 err = ssb_bus_scan(bus, baseaddr);
798 if (err)
799 goto err_sdio_exit;
800
801 /* Init PCI-host device (if any) */
802 err = ssb_pci_init(bus);
803 if (err)
804 goto err_unmap;
805 /* Init PCMCIA-host device (if any) */
806 err = ssb_pcmcia_init(bus);
807 if (err)
808 goto err_pci_exit;
809
810 /* Initialize basic system devices (if available) */
811 err = ssb_bus_powerup(bus, 0);
812 if (err)
813 goto err_pcmcia_exit;
814 ssb_chipcommon_init(&bus->chipco);
815 ssb_mipscore_init(&bus->mipscore);
816 err = ssb_fetch_invariants(bus, get_invariants);
817 if (err) {
818 ssb_bus_may_powerdown(bus);
819 goto err_pcmcia_exit;
820 }
821 ssb_bus_may_powerdown(bus);
822
823 /* Queue it for attach.
824 * See the comment at the ssb_is_early_boot definition. */
825 list_add_tail(&bus->list, &attach_queue);
826 if (!ssb_is_early_boot) {
827 /* This is not early boot, so we must attach the bus now */
828 err = ssb_attach_queued_buses();
829 if (err)
830 goto err_dequeue;
831 }
832 next_busnumber++;
833 ssb_buses_unlock();
834
835 out:
836 return err;
837
838 err_dequeue:
839 list_del(&bus->list);
840 err_pcmcia_exit:
841 ssb_pcmcia_exit(bus);
842 err_pci_exit:
843 ssb_pci_exit(bus);
844 err_unmap:
845 ssb_iounmap(bus);
846 err_sdio_exit:
847 ssb_sdio_exit(bus);
848 err_disable_xtal:
849 ssb_buses_unlock();
850 ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
851 return err;
852 }
853
854 #ifdef CONFIG_SSB_PCIHOST
855 int __devinit ssb_bus_pcibus_register(struct ssb_bus *bus,
856 struct pci_dev *host_pci)
857 {
858 int err;
859
860 bus->bustype = SSB_BUSTYPE_PCI;
861 bus->host_pci = host_pci;
862 bus->ops = &ssb_pci_ops;
863
864 err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
865 if (!err) {
866 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
867 "PCI device %s\n", dev_name(&host_pci->dev));
868 } else {
869 ssb_printk(KERN_ERR PFX "Failed to register PCI version"
870 " of SSB with error %d\n", err);
871 }
872
873 return err;
874 }
875 EXPORT_SYMBOL(ssb_bus_pcibus_register);
876 #endif /* CONFIG_SSB_PCIHOST */
877
878 #ifdef CONFIG_SSB_PCMCIAHOST
879 int __devinit ssb_bus_pcmciabus_register(struct ssb_bus *bus,
880 struct pcmcia_device *pcmcia_dev,
881 unsigned long baseaddr)
882 {
883 int err;
884
885 bus->bustype = SSB_BUSTYPE_PCMCIA;
886 bus->host_pcmcia = pcmcia_dev;
887 bus->ops = &ssb_pcmcia_ops;
888
889 err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
890 if (!err) {
891 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
892 "PCMCIA device %s\n", pcmcia_dev->devname);
893 }
894
895 return err;
896 }
897 EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
898 #endif /* CONFIG_SSB_PCMCIAHOST */
899
900 #ifdef CONFIG_SSB_SDIOHOST
901 int __devinit ssb_bus_sdiobus_register(struct ssb_bus *bus,
902 struct sdio_func *func,
903 unsigned int quirks)
904 {
905 int err;
906
907 bus->bustype = SSB_BUSTYPE_SDIO;
908 bus->host_sdio = func;
909 bus->ops = &ssb_sdio_ops;
910 bus->quirks = quirks;
911
912 err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
913 if (!err) {
914 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
915 "SDIO device %s\n", sdio_func_id(func));
916 }
917
918 return err;
919 }
920 EXPORT_SYMBOL(ssb_bus_sdiobus_register);
921 #endif /* CONFIG_SSB_PCMCIAHOST */
922
923 int __devinit ssb_bus_ssbbus_register(struct ssb_bus *bus,
924 unsigned long baseaddr,
925 ssb_invariants_func_t get_invariants)
926 {
927 int err;
928
929 bus->bustype = SSB_BUSTYPE_SSB;
930 bus->ops = &ssb_ssb_ops;
931
932 err = ssb_bus_register(bus, get_invariants, baseaddr);
933 if (!err) {
934 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
935 "address 0x%08lX\n", baseaddr);
936 }
937
938 return err;
939 }
940
941 int __ssb_driver_register(struct ssb_driver *drv, struct module *owner)
942 {
943 drv->drv.name = drv->name;
944 drv->drv.bus = &ssb_bustype;
945 drv->drv.owner = owner;
946
947 return driver_register(&drv->drv);
948 }
949 EXPORT_SYMBOL(__ssb_driver_register);
950
951 void ssb_driver_unregister(struct ssb_driver *drv)
952 {
953 driver_unregister(&drv->drv);
954 }
955 EXPORT_SYMBOL(ssb_driver_unregister);
956
957 void ssb_set_devtypedata(struct ssb_device *dev, void *data)
958 {
959 struct ssb_bus *bus = dev->bus;
960 struct ssb_device *ent;
961 int i;
962
963 for (i = 0; i < bus->nr_devices; i++) {
964 ent = &(bus->devices[i]);
965 if (ent->id.vendor != dev->id.vendor)
966 continue;
967 if (ent->id.coreid != dev->id.coreid)
968 continue;
969
970 ent->devtypedata = data;
971 }
972 }
973 EXPORT_SYMBOL(ssb_set_devtypedata);
974
975 static u32 clkfactor_f6_resolve(u32 v)
976 {
977 /* map the magic values */
978 switch (v) {
979 case SSB_CHIPCO_CLK_F6_2:
980 return 2;
981 case SSB_CHIPCO_CLK_F6_3:
982 return 3;
983 case SSB_CHIPCO_CLK_F6_4:
984 return 4;
985 case SSB_CHIPCO_CLK_F6_5:
986 return 5;
987 case SSB_CHIPCO_CLK_F6_6:
988 return 6;
989 case SSB_CHIPCO_CLK_F6_7:
990 return 7;
991 }
992 return 0;
993 }
994
995 /* Calculate the speed the backplane would run at a given set of clockcontrol values */
996 u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
997 {
998 u32 n1, n2, clock, m1, m2, m3, mc;
999
1000 n1 = (n & SSB_CHIPCO_CLK_N1);
1001 n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT);
1002
1003 switch (plltype) {
1004 case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
1005 if (m & SSB_CHIPCO_CLK_T6_MMASK)
1006 return SSB_CHIPCO_CLK_T6_M1;
1007 return SSB_CHIPCO_CLK_T6_M0;
1008 case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
1009 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
1010 case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
1011 case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
1012 n1 = clkfactor_f6_resolve(n1);
1013 n2 += SSB_CHIPCO_CLK_F5_BIAS;
1014 break;
1015 case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */
1016 n1 += SSB_CHIPCO_CLK_T2_BIAS;
1017 n2 += SSB_CHIPCO_CLK_T2_BIAS;
1018 SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7)));
1019 SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23)));
1020 break;
1021 case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */
1022 return 100000000;
1023 default:
1024 SSB_WARN_ON(1);
1025 }
1026
1027 switch (plltype) {
1028 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
1029 case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
1030 clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2;
1031 break;
1032 default:
1033 clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2;
1034 }
1035 if (!clock)
1036 return 0;
1037
1038 m1 = (m & SSB_CHIPCO_CLK_M1);
1039 m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT);
1040 m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT);
1041 mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT);
1042
1043 switch (plltype) {
1044 case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
1045 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
1046 case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
1047 case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
1048 m1 = clkfactor_f6_resolve(m1);
1049 if ((plltype == SSB_PLLTYPE_1) ||
1050 (plltype == SSB_PLLTYPE_3))
1051 m2 += SSB_CHIPCO_CLK_F5_BIAS;
1052 else
1053 m2 = clkfactor_f6_resolve(m2);
1054 m3 = clkfactor_f6_resolve(m3);
1055
1056 switch (mc) {
1057 case SSB_CHIPCO_CLK_MC_BYPASS:
1058 return clock;
1059 case SSB_CHIPCO_CLK_MC_M1:
1060 return (clock / m1);
1061 case SSB_CHIPCO_CLK_MC_M1M2:
1062 return (clock / (m1 * m2));
1063 case SSB_CHIPCO_CLK_MC_M1M2M3:
1064 return (clock / (m1 * m2 * m3));
1065 case SSB_CHIPCO_CLK_MC_M1M3:
1066 return (clock / (m1 * m3));
1067 }
1068 return 0;
1069 case SSB_PLLTYPE_2:
1070 m1 += SSB_CHIPCO_CLK_T2_BIAS;
1071 m2 += SSB_CHIPCO_CLK_T2M2_BIAS;
1072 m3 += SSB_CHIPCO_CLK_T2_BIAS;
1073 SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7)));
1074 SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10)));
1075 SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7)));
1076
1077 if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP))
1078 clock /= m1;
1079 if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP))
1080 clock /= m2;
1081 if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP))
1082 clock /= m3;
1083 return clock;
1084 default:
1085 SSB_WARN_ON(1);
1086 }
1087 return 0;
1088 }
1089
1090 /* Get the current speed the backplane is running at */
1091 u32 ssb_clockspeed(struct ssb_bus *bus)
1092 {
1093 u32 rate;
1094 u32 plltype;
1095 u32 clkctl_n, clkctl_m;
1096
1097 if (ssb_extif_available(&bus->extif))
1098 ssb_extif_get_clockcontrol(&bus->extif, &plltype,
1099 &clkctl_n, &clkctl_m);
1100 else if (bus->chipco.dev)
1101 ssb_chipco_get_clockcontrol(&bus->chipco, &plltype,
1102 &clkctl_n, &clkctl_m);
1103 else
1104 return 0;
1105
1106 if (bus->chip_id == 0x5365) {
1107 rate = 100000000;
1108 } else {
1109 rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
1110 if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
1111 rate /= 2;
1112 }
1113
1114 return rate;
1115 }
1116 EXPORT_SYMBOL(ssb_clockspeed);
1117
1118 static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev)
1119 {
1120 u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
1121
1122 /* The REJECT bit seems to be different for Backplane rev 2.3 */
1123 switch (rev) {
1124 case SSB_IDLOW_SSBREV_22:
1125 case SSB_IDLOW_SSBREV_24:
1126 case SSB_IDLOW_SSBREV_26:
1127 return SSB_TMSLOW_REJECT;
1128 case SSB_IDLOW_SSBREV_23:
1129 return SSB_TMSLOW_REJECT_23;
1130 case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */
1131 case SSB_IDLOW_SSBREV_27: /* same here */
1132 return SSB_TMSLOW_REJECT; /* this is a guess */
1133 default:
1134 printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
1135 WARN_ON(1);
1136 }
1137 return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
1138 }
1139
1140 int ssb_device_is_enabled(struct ssb_device *dev)
1141 {
1142 u32 val;
1143 u32 reject;
1144
1145 reject = ssb_tmslow_reject_bitmask(dev);
1146 val = ssb_read32(dev, SSB_TMSLOW);
1147 val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject;
1148
1149 return (val == SSB_TMSLOW_CLOCK);
1150 }
1151 EXPORT_SYMBOL(ssb_device_is_enabled);
1152
1153 static void ssb_flush_tmslow(struct ssb_device *dev)
1154 {
1155 /* Make _really_ sure the device has finished the TMSLOW
1156 * register write transaction, as we risk running into
1157 * a machine check exception otherwise.
1158 * Do this by reading the register back to commit the
1159 * PCI write and delay an additional usec for the device
1160 * to react to the change. */
1161 ssb_read32(dev, SSB_TMSLOW);
1162 udelay(1);
1163 }
1164
1165 void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
1166 {
1167 u32 val;
1168
1169 ssb_device_disable(dev, core_specific_flags);
1170 ssb_write32(dev, SSB_TMSLOW,
1171 SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK |
1172 SSB_TMSLOW_FGC | core_specific_flags);
1173 ssb_flush_tmslow(dev);
1174
1175 /* Clear SERR if set. This is a hw bug workaround. */
1176 if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR)
1177 ssb_write32(dev, SSB_TMSHIGH, 0);
1178
1179 val = ssb_read32(dev, SSB_IMSTATE);
1180 if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) {
1181 val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO);
1182 ssb_write32(dev, SSB_IMSTATE, val);
1183 }
1184
1185 ssb_write32(dev, SSB_TMSLOW,
1186 SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC |
1187 core_specific_flags);
1188 ssb_flush_tmslow(dev);
1189
1190 ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK |
1191 core_specific_flags);
1192 ssb_flush_tmslow(dev);
1193 }
1194 EXPORT_SYMBOL(ssb_device_enable);
1195
1196 /* Wait for bitmask in a register to get set or cleared.
1197 * timeout is in units of ten-microseconds */
1198 static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
1199 int timeout, int set)
1200 {
1201 int i;
1202 u32 val;
1203
1204 for (i = 0; i < timeout; i++) {
1205 val = ssb_read32(dev, reg);
1206 if (set) {
1207 if ((val & bitmask) == bitmask)
1208 return 0;
1209 } else {
1210 if (!(val & bitmask))
1211 return 0;
1212 }
1213 udelay(10);
1214 }
1215 printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
1216 "register %04X to %s.\n",
1217 bitmask, reg, (set ? "set" : "clear"));
1218
1219 return -ETIMEDOUT;
1220 }
1221
1222 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
1223 {
1224 u32 reject, val;
1225
1226 if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
1227 return;
1228
1229 reject = ssb_tmslow_reject_bitmask(dev);
1230
1231 if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) {
1232 ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
1233 ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1);
1234 ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
1235
1236 if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
1237 val = ssb_read32(dev, SSB_IMSTATE);
1238 val |= SSB_IMSTATE_REJECT;
1239 ssb_write32(dev, SSB_IMSTATE, val);
1240 ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000,
1241 0);
1242 }
1243
1244 ssb_write32(dev, SSB_TMSLOW,
1245 SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
1246 reject | SSB_TMSLOW_RESET |
1247 core_specific_flags);
1248 ssb_flush_tmslow(dev);
1249
1250 if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
1251 val = ssb_read32(dev, SSB_IMSTATE);
1252 val &= ~SSB_IMSTATE_REJECT;
1253 ssb_write32(dev, SSB_IMSTATE, val);
1254 }
1255 }
1256
1257 ssb_write32(dev, SSB_TMSLOW,
1258 reject | SSB_TMSLOW_RESET |
1259 core_specific_flags);
1260 ssb_flush_tmslow(dev);
1261 }
1262 EXPORT_SYMBOL(ssb_device_disable);
1263
1264 /* Some chipsets need routing known for PCIe and 64-bit DMA */
1265 static bool ssb_dma_translation_special_bit(struct ssb_device *dev)
1266 {
1267 u16 chip_id = dev->bus->chip_id;
1268
1269 if (dev->id.coreid == SSB_DEV_80211) {
1270 return (chip_id == 0x4322 || chip_id == 43221 ||
1271 chip_id == 43231 || chip_id == 43222);
1272 }
1273
1274 return 0;
1275 }
1276
1277 u32 ssb_dma_translation(struct ssb_device *dev)
1278 {
1279 switch (dev->bus->bustype) {
1280 case SSB_BUSTYPE_SSB:
1281 return 0;
1282 case SSB_BUSTYPE_PCI:
1283 if (pci_is_pcie(dev->bus->host_pci) &&
1284 ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) {
1285 return SSB_PCIE_DMA_H32;
1286 } else {
1287 if (ssb_dma_translation_special_bit(dev))
1288 return SSB_PCIE_DMA_H32;
1289 else
1290 return SSB_PCI_DMA;
1291 }
1292 default:
1293 __ssb_dma_not_implemented(dev);
1294 }
1295 return 0;
1296 }
1297 EXPORT_SYMBOL(ssb_dma_translation);
1298
1299 int ssb_bus_may_powerdown(struct ssb_bus *bus)
1300 {
1301 struct ssb_chipcommon *cc;
1302 int err = 0;
1303
1304 /* On buses where more than one core may be working
1305 * at a time, we must not powerdown stuff if there are
1306 * still cores that may want to run. */
1307 if (bus->bustype == SSB_BUSTYPE_SSB)
1308 goto out;
1309
1310 cc = &bus->chipco;
1311
1312 if (!cc->dev)
1313 goto out;
1314 if (cc->dev->id.revision < 5)
1315 goto out;
1316
1317 ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
1318 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
1319 if (err)
1320 goto error;
1321 out:
1322 #ifdef CONFIG_SSB_DEBUG
1323 bus->powered_up = 0;
1324 #endif
1325 return err;
1326 error:
1327 ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
1328 goto out;
1329 }
1330 EXPORT_SYMBOL(ssb_bus_may_powerdown);
1331
1332 int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
1333 {
1334 int err;
1335 enum ssb_clkmode mode;
1336
1337 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
1338 if (err)
1339 goto error;
1340
1341 #ifdef CONFIG_SSB_DEBUG
1342 bus->powered_up = 1;
1343 #endif
1344
1345 mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
1346 ssb_chipco_set_clockmode(&bus->chipco, mode);
1347
1348 return 0;
1349 error:
1350 ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
1351 return err;
1352 }
1353 EXPORT_SYMBOL(ssb_bus_powerup);
1354
1355 static void ssb_broadcast_value(struct ssb_device *dev,
1356 u32 address, u32 data)
1357 {
1358 #ifdef CONFIG_SSB_DRIVER_PCICORE
1359 /* This is used for both, PCI and ChipCommon core, so be careful. */
1360 BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
1361 BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
1362 #endif
1363
1364 ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address);
1365 ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */
1366 ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data);
1367 ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */
1368 }
1369
1370 void ssb_commit_settings(struct ssb_bus *bus)
1371 {
1372 struct ssb_device *dev;
1373
1374 #ifdef CONFIG_SSB_DRIVER_PCICORE
1375 dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
1376 #else
1377 dev = bus->chipco.dev;
1378 #endif
1379 if (WARN_ON(!dev))
1380 return;
1381 /* This forces an update of the cached registers. */
1382 ssb_broadcast_value(dev, 0xFD8, 0);
1383 }
1384 EXPORT_SYMBOL(ssb_commit_settings);
1385
1386 u32 ssb_admatch_base(u32 adm)
1387 {
1388 u32 base = 0;
1389
1390 switch (adm & SSB_ADM_TYPE) {
1391 case SSB_ADM_TYPE0:
1392 base = (adm & SSB_ADM_BASE0);
1393 break;
1394 case SSB_ADM_TYPE1:
1395 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1396 base = (adm & SSB_ADM_BASE1);
1397 break;
1398 case SSB_ADM_TYPE2:
1399 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1400 base = (adm & SSB_ADM_BASE2);
1401 break;
1402 default:
1403 SSB_WARN_ON(1);
1404 }
1405
1406 return base;
1407 }
1408 EXPORT_SYMBOL(ssb_admatch_base);
1409
1410 u32 ssb_admatch_size(u32 adm)
1411 {
1412 u32 size = 0;
1413
1414 switch (adm & SSB_ADM_TYPE) {
1415 case SSB_ADM_TYPE0:
1416 size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT);
1417 break;
1418 case SSB_ADM_TYPE1:
1419 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1420 size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT);
1421 break;
1422 case SSB_ADM_TYPE2:
1423 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1424 size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT);
1425 break;
1426 default:
1427 SSB_WARN_ON(1);
1428 }
1429 size = (1 << (size + 1));
1430
1431 return size;
1432 }
1433 EXPORT_SYMBOL(ssb_admatch_size);
1434
1435 static int __init ssb_modinit(void)
1436 {
1437 int err;
1438
1439 /* See the comment at the ssb_is_early_boot definition */
1440 ssb_is_early_boot = 0;
1441 err = bus_register(&ssb_bustype);
1442 if (err)
1443 return err;
1444
1445 /* Maybe we already registered some buses at early boot.
1446 * Check for this and attach them
1447 */
1448 ssb_buses_lock();
1449 err = ssb_attach_queued_buses();
1450 ssb_buses_unlock();
1451 if (err) {
1452 bus_unregister(&ssb_bustype);
1453 goto out;
1454 }
1455
1456 err = b43_pci_ssb_bridge_init();
1457 if (err) {
1458 ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
1459 "initialization failed\n");
1460 /* don't fail SSB init because of this */
1461 err = 0;
1462 }
1463 err = ssb_gige_init();
1464 if (err) {
1465 ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
1466 "driver initialization failed\n");
1467 /* don't fail SSB init because of this */
1468 err = 0;
1469 }
1470 out:
1471 return err;
1472 }
1473 /* ssb must be initialized after PCI but before the ssb drivers.
1474 * That means we must use some initcall between subsys_initcall
1475 * and device_initcall. */
1476 fs_initcall(ssb_modinit);
1477
1478 static void __exit ssb_modexit(void)
1479 {
1480 ssb_gige_exit();
1481 b43_pci_ssb_bridge_exit();
1482 bus_unregister(&ssb_bustype);
1483 }
1484 module_exit(ssb_modexit)
Linux with added FPC-III support