?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
perf tools: Don't clone maps from parent when synthesizing forks
[linux/fpc-iii.git] / drivers / media / platform / omap3isp / ispcsi2.c
bloba4d3d030e81e20568b063d0544d18b64dd3a4d87
1 /*
2 * ispcsi2.c
3 *
4 * TI OMAP3 ISP - CSI2 module
5 *
6 * Copyright (C) 2010 Nokia Corporation
7 * Copyright (C) 2009 Texas Instruments, Inc.
8 *
9 * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
10 * Sakari Ailus <sakari.ailus@iki.fi>
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 */
16 #include <linux/delay.h>
17 #include <media/v4l2-common.h>
18 #include <linux/v4l2-mediabus.h>
19 #include <linux/mm.h>
20
21 #include "isp.h"
22 #include "ispreg.h"
23 #include "ispcsi2.h"
24
25 /*
26 * csi2_if_enable - Enable CSI2 Receiver interface.
27 * @enable: enable flag
28 *
29 */
30 static void csi2_if_enable(struct isp_device *isp,
31 struct isp_csi2_device *csi2, u8 enable)
32 {
33 struct isp_csi2_ctrl_cfg *currctrl = &csi2->ctrl;
34
35 isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_CTRL, ISPCSI2_CTRL_IF_EN,
36 enable ? ISPCSI2_CTRL_IF_EN : 0);
37
38 currctrl->if_enable = enable;
39 }
40
41 /*
42 * csi2_recv_config - CSI2 receiver module configuration.
43 * @currctrl: isp_csi2_ctrl_cfg structure
44 *
45 */
46 static void csi2_recv_config(struct isp_device *isp,
47 struct isp_csi2_device *csi2,
48 struct isp_csi2_ctrl_cfg *currctrl)
49 {
50 u32 reg;
51
52 reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTRL);
53
54 if (currctrl->frame_mode)
55 reg |= ISPCSI2_CTRL_FRAME;
56 else
57 reg &= ~ISPCSI2_CTRL_FRAME;
58
59 if (currctrl->vp_clk_enable)
60 reg |= ISPCSI2_CTRL_VP_CLK_EN;
61 else
62 reg &= ~ISPCSI2_CTRL_VP_CLK_EN;
63
64 if (currctrl->vp_only_enable)
65 reg |= ISPCSI2_CTRL_VP_ONLY_EN;
66 else
67 reg &= ~ISPCSI2_CTRL_VP_ONLY_EN;
68
69 reg &= ~ISPCSI2_CTRL_VP_OUT_CTRL_MASK;
70 reg |= currctrl->vp_out_ctrl << ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT;
71
72 if (currctrl->ecc_enable)
73 reg |= ISPCSI2_CTRL_ECC_EN;
74 else
75 reg &= ~ISPCSI2_CTRL_ECC_EN;
76
77 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTRL);
78 }
79
80 static const unsigned int csi2_input_fmts[] = {
81 MEDIA_BUS_FMT_SGRBG10_1X10,
82 MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
83 MEDIA_BUS_FMT_SRGGB10_1X10,
84 MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8,
85 MEDIA_BUS_FMT_SBGGR10_1X10,
86 MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8,
87 MEDIA_BUS_FMT_SGBRG10_1X10,
88 MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8,
89 MEDIA_BUS_FMT_YUYV8_2X8,
90 };
91
92 /* To set the format on the CSI2 requires a mapping function that takes
93 * the following inputs:
94 * - 3 different formats (at this time)
95 * - 2 destinations (mem, vp+mem) (vp only handled separately)
96 * - 2 decompression options (on, off)
97 * - 2 isp revisions (certain format must be handled differently on OMAP3630)
98 * Output should be CSI2 frame format code
99 * Array indices as follows: [format][dest][decompr][is_3630]
100 * Not all combinations are valid. 0 means invalid.
101 */
102 static const u16 __csi2_fmt_map[3][2][2][2] = {
103 /* RAW10 formats */
104 {
105 /* Output to memory */
106 {
107 /* No DPCM decompression */
108 { CSI2_PIX_FMT_RAW10_EXP16, CSI2_PIX_FMT_RAW10_EXP16 },
109 /* DPCM decompression */
110 { 0, 0 },
111 },
112 /* Output to both */
113 {
114 /* No DPCM decompression */
115 { CSI2_PIX_FMT_RAW10_EXP16_VP,
116 CSI2_PIX_FMT_RAW10_EXP16_VP },
117 /* DPCM decompression */
118 { 0, 0 },
119 },
120 },
121 /* RAW10 DPCM8 formats */
122 {
123 /* Output to memory */
124 {
125 /* No DPCM decompression */
126 { CSI2_PIX_FMT_RAW8, CSI2_USERDEF_8BIT_DATA1 },
127 /* DPCM decompression */
128 { CSI2_PIX_FMT_RAW8_DPCM10_EXP16,
129 CSI2_USERDEF_8BIT_DATA1_DPCM10 },
130 },
131 /* Output to both */
132 {
133 /* No DPCM decompression */
134 { CSI2_PIX_FMT_RAW8_VP,
135 CSI2_PIX_FMT_RAW8_VP },
136 /* DPCM decompression */
137 { CSI2_PIX_FMT_RAW8_DPCM10_VP,
138 CSI2_USERDEF_8BIT_DATA1_DPCM10_VP },
139 },
140 },
141 /* YUYV8 2X8 formats */
142 {
143 /* Output to memory */
144 {
145 /* No DPCM decompression */
146 { CSI2_PIX_FMT_YUV422_8BIT,
147 CSI2_PIX_FMT_YUV422_8BIT },
148 /* DPCM decompression */
149 { 0, 0 },
150 },
151 /* Output to both */
152 {
153 /* No DPCM decompression */
154 { CSI2_PIX_FMT_YUV422_8BIT_VP,
155 CSI2_PIX_FMT_YUV422_8BIT_VP },
156 /* DPCM decompression */
157 { 0, 0 },
158 },
159 },
160 };
161
162 /*
163 * csi2_ctx_map_format - Map CSI2 sink media bus format to CSI2 format ID
164 * @csi2: ISP CSI2 device
165 *
166 * Returns CSI2 physical format id
167 */
168 static u16 csi2_ctx_map_format(struct isp_csi2_device *csi2)
169 {
170 const struct v4l2_mbus_framefmt *fmt = &csi2->formats[CSI2_PAD_SINK];
171 int fmtidx, destidx, is_3630;
172
173 switch (fmt->code) {
174 case MEDIA_BUS_FMT_SGRBG10_1X10:
175 case MEDIA_BUS_FMT_SRGGB10_1X10:
176 case MEDIA_BUS_FMT_SBGGR10_1X10:
177 case MEDIA_BUS_FMT_SGBRG10_1X10:
178 fmtidx = 0;
179 break;
180 case MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8:
181 case MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8:
182 case MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8:
183 case MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8:
184 fmtidx = 1;
185 break;
186 case MEDIA_BUS_FMT_YUYV8_2X8:
187 fmtidx = 2;
188 break;
189 default:
190 WARN(1, KERN_ERR "CSI2: pixel format %08x unsupported!\n",
191 fmt->code);
192 return 0;
193 }
194
195 if (!(csi2->output & CSI2_OUTPUT_CCDC) &&
196 !(csi2->output & CSI2_OUTPUT_MEMORY)) {
197 /* Neither output enabled is a valid combination */
198 return CSI2_PIX_FMT_OTHERS;
199 }
200
201 /* If we need to skip frames at the beginning of the stream disable the
202 * video port to avoid sending the skipped frames to the CCDC.
203 */
204 destidx = csi2->frame_skip ? 0 : !!(csi2->output & CSI2_OUTPUT_CCDC);
205 is_3630 = csi2->isp->revision == ISP_REVISION_15_0;
206
207 return __csi2_fmt_map[fmtidx][destidx][csi2->dpcm_decompress][is_3630];
208 }
209
210 /*
211 * csi2_set_outaddr - Set memory address to save output image
212 * @csi2: Pointer to ISP CSI2a device.
213 * @addr: ISP MMU Mapped 32-bit memory address aligned on 32 byte boundary.
214 *
215 * Sets the memory address where the output will be saved.
216 *
217 * Returns 0 if successful, or -EINVAL if the address is not in the 32 byte
218 * boundary.
219 */
220 static void csi2_set_outaddr(struct isp_csi2_device *csi2, u32 addr)
221 {
222 struct isp_device *isp = csi2->isp;
223 struct isp_csi2_ctx_cfg *ctx = &csi2->contexts[0];
224
225 ctx->ping_addr = addr;
226 ctx->pong_addr = addr;
227 isp_reg_writel(isp, ctx->ping_addr,
228 csi2->regs1, ISPCSI2_CTX_DAT_PING_ADDR(ctx->ctxnum));
229 isp_reg_writel(isp, ctx->pong_addr,
230 csi2->regs1, ISPCSI2_CTX_DAT_PONG_ADDR(ctx->ctxnum));
231 }
232
233 /*
234 * is_usr_def_mapping - Checks whether USER_DEF_MAPPING should
235 * be enabled by CSI2.
236 * @format_id: mapped format id
237 *
238 */
239 static inline int is_usr_def_mapping(u32 format_id)
240 {
241 return (format_id & 0x40) ? 1 : 0;
242 }
243
244 /*
245 * csi2_ctx_enable - Enable specified CSI2 context
246 * @ctxnum: Context number, valid between 0 and 7 values.
247 * @enable: enable
248 *
249 */
250 static void csi2_ctx_enable(struct isp_device *isp,
251 struct isp_csi2_device *csi2, u8 ctxnum, u8 enable)
252 {
253 struct isp_csi2_ctx_cfg *ctx = &csi2->contexts[ctxnum];
254 unsigned int skip = 0;
255 u32 reg;
256
257 reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL1(ctxnum));
258
259 if (enable) {
260 if (csi2->frame_skip)
261 skip = csi2->frame_skip;
262 else if (csi2->output & CSI2_OUTPUT_MEMORY)
263 skip = 1;
264
265 reg &= ~ISPCSI2_CTX_CTRL1_COUNT_MASK;
266 reg |= ISPCSI2_CTX_CTRL1_COUNT_UNLOCK
267 | (skip << ISPCSI2_CTX_CTRL1_COUNT_SHIFT)
268 | ISPCSI2_CTX_CTRL1_CTX_EN;
269 } else {
270 reg &= ~ISPCSI2_CTX_CTRL1_CTX_EN;
271 }
272
273 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL1(ctxnum));
274 ctx->enabled = enable;
275 }
276
277 /*
278 * csi2_ctx_config - CSI2 context configuration.
279 * @ctx: context configuration
280 *
281 */
282 static void csi2_ctx_config(struct isp_device *isp,
283 struct isp_csi2_device *csi2,
284 struct isp_csi2_ctx_cfg *ctx)
285 {
286 u32 reg;
287
288 /* Set up CSI2_CTx_CTRL1 */
289 reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL1(ctx->ctxnum));
290
291 if (ctx->eof_enabled)
292 reg |= ISPCSI2_CTX_CTRL1_EOF_EN;
293 else
294 reg &= ~ISPCSI2_CTX_CTRL1_EOF_EN;
295
296 if (ctx->eol_enabled)
297 reg |= ISPCSI2_CTX_CTRL1_EOL_EN;
298 else
299 reg &= ~ISPCSI2_CTX_CTRL1_EOL_EN;
300
301 if (ctx->checksum_enabled)
302 reg |= ISPCSI2_CTX_CTRL1_CS_EN;
303 else
304 reg &= ~ISPCSI2_CTX_CTRL1_CS_EN;
305
306 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL1(ctx->ctxnum));
307
308 /* Set up CSI2_CTx_CTRL2 */
309 reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL2(ctx->ctxnum));
310
311 reg &= ~(ISPCSI2_CTX_CTRL2_VIRTUAL_ID_MASK);
312 reg |= ctx->virtual_id << ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT;
313
314 reg &= ~(ISPCSI2_CTX_CTRL2_FORMAT_MASK);
315 reg |= ctx->format_id << ISPCSI2_CTX_CTRL2_FORMAT_SHIFT;
316
317 if (ctx->dpcm_decompress) {
318 if (ctx->dpcm_predictor)
319 reg |= ISPCSI2_CTX_CTRL2_DPCM_PRED;
320 else
321 reg &= ~ISPCSI2_CTX_CTRL2_DPCM_PRED;
322 }
323
324 if (is_usr_def_mapping(ctx->format_id)) {
325 reg &= ~ISPCSI2_CTX_CTRL2_USER_DEF_MAP_MASK;
326 reg |= 2 << ISPCSI2_CTX_CTRL2_USER_DEF_MAP_SHIFT;
327 }
328
329 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL2(ctx->ctxnum));
330
331 /* Set up CSI2_CTx_CTRL3 */
332 reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL3(ctx->ctxnum));
333 reg &= ~(ISPCSI2_CTX_CTRL3_ALPHA_MASK);
334 reg |= (ctx->alpha << ISPCSI2_CTX_CTRL3_ALPHA_SHIFT);
335
336 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL3(ctx->ctxnum));
337
338 /* Set up CSI2_CTx_DAT_OFST */
339 reg = isp_reg_readl(isp, csi2->regs1,
340 ISPCSI2_CTX_DAT_OFST(ctx->ctxnum));
341 reg &= ~ISPCSI2_CTX_DAT_OFST_OFST_MASK;
342 reg |= ctx->data_offset << ISPCSI2_CTX_DAT_OFST_OFST_SHIFT;
343 isp_reg_writel(isp, reg, csi2->regs1,
344 ISPCSI2_CTX_DAT_OFST(ctx->ctxnum));
345
346 isp_reg_writel(isp, ctx->ping_addr,
347 csi2->regs1, ISPCSI2_CTX_DAT_PING_ADDR(ctx->ctxnum));
348
349 isp_reg_writel(isp, ctx->pong_addr,
350 csi2->regs1, ISPCSI2_CTX_DAT_PONG_ADDR(ctx->ctxnum));
351 }
352
353 /*
354 * csi2_timing_config - CSI2 timing configuration.
355 * @timing: csi2_timing_cfg structure
356 */
357 static void csi2_timing_config(struct isp_device *isp,
358 struct isp_csi2_device *csi2,
359 struct isp_csi2_timing_cfg *timing)
360 {
361 u32 reg;
362
363 reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_TIMING);
364
365 if (timing->force_rx_mode)
366 reg |= ISPCSI2_TIMING_FORCE_RX_MODE_IO(timing->ionum);
367 else
368 reg &= ~ISPCSI2_TIMING_FORCE_RX_MODE_IO(timing->ionum);
369
370 if (timing->stop_state_16x)
371 reg |= ISPCSI2_TIMING_STOP_STATE_X16_IO(timing->ionum);
372 else
373 reg &= ~ISPCSI2_TIMING_STOP_STATE_X16_IO(timing->ionum);
374
375 if (timing->stop_state_4x)
376 reg |= ISPCSI2_TIMING_STOP_STATE_X4_IO(timing->ionum);
377 else
378 reg &= ~ISPCSI2_TIMING_STOP_STATE_X4_IO(timing->ionum);
379
380 reg &= ~ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_MASK(timing->ionum);
381 reg |= timing->stop_state_counter <<
382 ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(timing->ionum);
383
384 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_TIMING);
385 }
386
387 /*
388 * csi2_irq_ctx_set - Enables CSI2 Context IRQs.
389 * @enable: Enable/disable CSI2 Context interrupts
390 */
391 static void csi2_irq_ctx_set(struct isp_device *isp,
392 struct isp_csi2_device *csi2, int enable)
393 {
394 int i;
395
396 for (i = 0; i < 8; i++) {
397 isp_reg_writel(isp, ISPCSI2_CTX_IRQSTATUS_FE_IRQ, csi2->regs1,
398 ISPCSI2_CTX_IRQSTATUS(i));
399 if (enable)
400 isp_reg_set(isp, csi2->regs1, ISPCSI2_CTX_IRQENABLE(i),
401 ISPCSI2_CTX_IRQSTATUS_FE_IRQ);
402 else
403 isp_reg_clr(isp, csi2->regs1, ISPCSI2_CTX_IRQENABLE(i),
404 ISPCSI2_CTX_IRQSTATUS_FE_IRQ);
405 }
406 }
407
408 /*
409 * csi2_irq_complexio1_set - Enables CSI2 ComplexIO IRQs.
410 * @enable: Enable/disable CSI2 ComplexIO #1 interrupts
411 */
412 static void csi2_irq_complexio1_set(struct isp_device *isp,
413 struct isp_csi2_device *csi2, int enable)
414 {
415 u32 reg;
416 reg = ISPCSI2_PHY_IRQENABLE_STATEALLULPMEXIT |
417 ISPCSI2_PHY_IRQENABLE_STATEALLULPMENTER |
418 ISPCSI2_PHY_IRQENABLE_STATEULPM5 |
419 ISPCSI2_PHY_IRQENABLE_ERRCONTROL5 |
420 ISPCSI2_PHY_IRQENABLE_ERRESC5 |
421 ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS5 |
422 ISPCSI2_PHY_IRQENABLE_ERRSOTHS5 |
423 ISPCSI2_PHY_IRQENABLE_STATEULPM4 |
424 ISPCSI2_PHY_IRQENABLE_ERRCONTROL4 |
425 ISPCSI2_PHY_IRQENABLE_ERRESC4 |
426 ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS4 |
427 ISPCSI2_PHY_IRQENABLE_ERRSOTHS4 |
428 ISPCSI2_PHY_IRQENABLE_STATEULPM3 |
429 ISPCSI2_PHY_IRQENABLE_ERRCONTROL3 |
430 ISPCSI2_PHY_IRQENABLE_ERRESC3 |
431 ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS3 |
432 ISPCSI2_PHY_IRQENABLE_ERRSOTHS3 |
433 ISPCSI2_PHY_IRQENABLE_STATEULPM2 |
434 ISPCSI2_PHY_IRQENABLE_ERRCONTROL2 |
435 ISPCSI2_PHY_IRQENABLE_ERRESC2 |
436 ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS2 |
437 ISPCSI2_PHY_IRQENABLE_ERRSOTHS2 |
438 ISPCSI2_PHY_IRQENABLE_STATEULPM1 |
439 ISPCSI2_PHY_IRQENABLE_ERRCONTROL1 |
440 ISPCSI2_PHY_IRQENABLE_ERRESC1 |
441 ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS1 |
442 ISPCSI2_PHY_IRQENABLE_ERRSOTHS1;
443 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_PHY_IRQSTATUS);
444 if (enable)
445 reg |= isp_reg_readl(isp, csi2->regs1, ISPCSI2_PHY_IRQENABLE);
446 else
447 reg = 0;
448 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_PHY_IRQENABLE);
449 }
450
451 /*
452 * csi2_irq_status_set - Enables CSI2 Status IRQs.
453 * @enable: Enable/disable CSI2 Status interrupts
454 */
455 static void csi2_irq_status_set(struct isp_device *isp,
456 struct isp_csi2_device *csi2, int enable)
457 {
458 u32 reg;
459 reg = ISPCSI2_IRQSTATUS_OCP_ERR_IRQ |
460 ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ |
461 ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ |
462 ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ |
463 ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ |
464 ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ |
465 ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ |
466 ISPCSI2_IRQSTATUS_CONTEXT(0);
467 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_IRQSTATUS);
468 if (enable)
469 reg |= isp_reg_readl(isp, csi2->regs1, ISPCSI2_IRQENABLE);
470 else
471 reg = 0;
472
473 isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_IRQENABLE);
474 }
475
476 /*
477 * omap3isp_csi2_reset - Resets the CSI2 module.
478 *
479 * Must be called with the phy lock held.
480 *
481 * Returns 0 if successful, or -EBUSY if power command didn't respond.
482 */
483 int omap3isp_csi2_reset(struct isp_csi2_device *csi2)
484 {
485 struct isp_device *isp = csi2->isp;
486 u8 soft_reset_retries = 0;
487 u32 reg;
488 int i;
489
490 if (!csi2->available)
491 return -ENODEV;
492
493 if (csi2->phy->entity)
494 return -EBUSY;
495
496 isp_reg_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG,
497 ISPCSI2_SYSCONFIG_SOFT_RESET);
498
499 do {
500 reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_SYSSTATUS) &
501 ISPCSI2_SYSSTATUS_RESET_DONE;
502 if (reg == ISPCSI2_SYSSTATUS_RESET_DONE)
503 break;
504 soft_reset_retries++;
505 if (soft_reset_retries < 5)
506 udelay(100);
507 } while (soft_reset_retries < 5);
508
509 if (soft_reset_retries == 5) {
510 dev_err(isp->dev, "CSI2: Soft reset try count exceeded!\n");
511 return -EBUSY;
512 }
513
514 if (isp->revision == ISP_REVISION_15_0)
515 isp_reg_set(isp, csi2->regs1, ISPCSI2_PHY_CFG,
516 ISPCSI2_PHY_CFG_RESET_CTRL);
517
518 i = 100;
519 do {
520 reg = isp_reg_readl(isp, csi2->phy->phy_regs, ISPCSIPHY_REG1)
521 & ISPCSIPHY_REG1_RESET_DONE_CTRLCLK;
522 if (reg == ISPCSIPHY_REG1_RESET_DONE_CTRLCLK)
523 break;
524 udelay(100);
525 } while (--i > 0);
526
527 if (i == 0) {
528 dev_err(isp->dev,
529 "CSI2: Reset for CSI2_96M_FCLK domain Failed!\n");
530 return -EBUSY;
531 }
532
533 if (isp->autoidle)
534 isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG,
535 ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK |
536 ISPCSI2_SYSCONFIG_AUTO_IDLE,
537 ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SMART |
538 ((isp->revision == ISP_REVISION_15_0) ?
539 ISPCSI2_SYSCONFIG_AUTO_IDLE : 0));
540 else
541 isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG,
542 ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK |
543 ISPCSI2_SYSCONFIG_AUTO_IDLE,
544 ISPCSI2_SYSCONFIG_MSTANDBY_MODE_NO);
545
546 return 0;
547 }
548
549 static int csi2_configure(struct isp_csi2_device *csi2)
550 {
551 struct isp_pipeline *pipe = to_isp_pipeline(&csi2->subdev.entity);
552 const struct isp_bus_cfg *buscfg;
553 struct isp_device *isp = csi2->isp;
554 struct isp_csi2_timing_cfg *timing = &csi2->timing[0];
555 struct v4l2_subdev *sensor;
556 struct media_pad *pad;
557
558 /*
559 * CSI2 fields that can be updated while the context has
560 * been enabled or the interface has been enabled are not
561 * updated dynamically currently. So we do not allow to
562 * reconfigure if either has been enabled
563 */
564 if (csi2->contexts[0].enabled || csi2->ctrl.if_enable)
565 return -EBUSY;
566
567 pad = media_entity_remote_pad(&csi2->pads[CSI2_PAD_SINK]);
568 sensor = media_entity_to_v4l2_subdev(pad->entity);
569 buscfg = v4l2_subdev_to_bus_cfg(pipe->external);
570
571 csi2->frame_skip = 0;
572 v4l2_subdev_call(sensor, sensor, g_skip_frames, &csi2->frame_skip);
573
574 csi2->ctrl.vp_out_ctrl =
575 clamp_t(unsigned int, pipe->l3_ick / pipe->external_rate - 1,
576 1, 3);
577 dev_dbg(isp->dev, "%s: l3_ick %lu, external_rate %u, vp_out_ctrl %u\n",
578 __func__, pipe->l3_ick, pipe->external_rate,
579 csi2->ctrl.vp_out_ctrl);
580 csi2->ctrl.frame_mode = ISP_CSI2_FRAME_IMMEDIATE;
581 csi2->ctrl.ecc_enable = buscfg->bus.csi2.crc;
582
583 timing->ionum = 1;
584 timing->force_rx_mode = 1;
585 timing->stop_state_16x = 1;
586 timing->stop_state_4x = 1;
587 timing->stop_state_counter = 0x1FF;
588
589 /*
590 * The CSI2 receiver can't do any format conversion except DPCM
591 * decompression, so every set_format call configures both pads
592 * and enables DPCM decompression as a special case:
593 */
594 if (csi2->formats[CSI2_PAD_SINK].code !=
595 csi2->formats[CSI2_PAD_SOURCE].code)
596 csi2->dpcm_decompress = true;
597 else
598 csi2->dpcm_decompress = false;
599
600 csi2->contexts[0].format_id = csi2_ctx_map_format(csi2);
601
602 if (csi2->video_out.bpl_padding == 0)
603 csi2->contexts[0].data_offset = 0;
604 else
605 csi2->contexts[0].data_offset = csi2->video_out.bpl_value;
606
607 /*
608 * Enable end of frame and end of line signals generation for
609 * context 0. These signals are generated from CSI2 receiver to
610 * qualify the last pixel of a frame and the last pixel of a line.
611 * Without enabling the signals CSI2 receiver writes data to memory
612 * beyond buffer size and/or data line offset is not handled correctly.
613 */
614 csi2->contexts[0].eof_enabled = 1;
615 csi2->contexts[0].eol_enabled = 1;
616
617 csi2_irq_complexio1_set(isp, csi2, 1);
618 csi2_irq_ctx_set(isp, csi2, 1);
619 csi2_irq_status_set(isp, csi2, 1);
620
621 /* Set configuration (timings, format and links) */
622 csi2_timing_config(isp, csi2, timing);
623 csi2_recv_config(isp, csi2, &csi2->ctrl);
624 csi2_ctx_config(isp, csi2, &csi2->contexts[0]);
625
626 return 0;
627 }
628
629 /*
630 * csi2_print_status - Prints CSI2 debug information.
631 */
632 #define CSI2_PRINT_REGISTER(isp, regs, name)\
633 dev_dbg(isp->dev, "###CSI2 " #name "=0x%08x\n", \
634 isp_reg_readl(isp, regs, ISPCSI2_##name))
635
636 static void csi2_print_status(struct isp_csi2_device *csi2)
637 {
638 struct isp_device *isp = csi2->isp;
639
640 if (!csi2->available)
641 return;
642
643 dev_dbg(isp->dev, "-------------CSI2 Register dump-------------\n");
644
645 CSI2_PRINT_REGISTER(isp, csi2->regs1, SYSCONFIG);
646 CSI2_PRINT_REGISTER(isp, csi2->regs1, SYSSTATUS);
647 CSI2_PRINT_REGISTER(isp, csi2->regs1, IRQENABLE);
648 CSI2_PRINT_REGISTER(isp, csi2->regs1, IRQSTATUS);
649 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTRL);
650 CSI2_PRINT_REGISTER(isp, csi2->regs1, DBG_H);
651 CSI2_PRINT_REGISTER(isp, csi2->regs1, GNQ);
652 CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_CFG);
653 CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_IRQSTATUS);
654 CSI2_PRINT_REGISTER(isp, csi2->regs1, SHORT_PACKET);
655 CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_IRQENABLE);
656 CSI2_PRINT_REGISTER(isp, csi2->regs1, DBG_P);
657 CSI2_PRINT_REGISTER(isp, csi2->regs1, TIMING);
658 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL1(0));
659 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL2(0));
660 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_OFST(0));
661 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_PING_ADDR(0));
662 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_PONG_ADDR(0));
663 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_IRQENABLE(0));
664 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_IRQSTATUS(0));
665 CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL3(0));
666
667 dev_dbg(isp->dev, "--------------------------------------------\n");
668 }
669
670 /* -----------------------------------------------------------------------------
671 * Interrupt handling
672 */
673
674 /*
675 * csi2_isr_buffer - Does buffer handling at end-of-frame
676 * when writing to memory.
677 */
678 static void csi2_isr_buffer(struct isp_csi2_device *csi2)
679 {
680 struct isp_device *isp = csi2->isp;
681 struct isp_buffer *buffer;
682
683 csi2_ctx_enable(isp, csi2, 0, 0);
684
685 buffer = omap3isp_video_buffer_next(&csi2->video_out);
686
687 /*
688 * Let video queue operation restart engine if there is an underrun
689 * condition.
690 */
691 if (buffer == NULL)
692 return;
693
694 csi2_set_outaddr(csi2, buffer->dma);
695 csi2_ctx_enable(isp, csi2, 0, 1);
696 }
697
698 static void csi2_isr_ctx(struct isp_csi2_device *csi2,
699 struct isp_csi2_ctx_cfg *ctx)
700 {
701 struct isp_device *isp = csi2->isp;
702 unsigned int n = ctx->ctxnum;
703 u32 status;
704
705 status = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_IRQSTATUS(n));
706 isp_reg_writel(isp, status, csi2->regs1, ISPCSI2_CTX_IRQSTATUS(n));
707
708 if (!(status & ISPCSI2_CTX_IRQSTATUS_FE_IRQ))
709 return;
710
711 /* Skip interrupts until we reach the frame skip count. The CSI2 will be
712 * automatically disabled, as the frame skip count has been programmed
713 * in the CSI2_CTx_CTRL1::COUNT field, so reenable it.
714 *
715 * It would have been nice to rely on the FRAME_NUMBER interrupt instead
716 * but it turned out that the interrupt is only generated when the CSI2
717 * writes to memory (the CSI2_CTx_CTRL1::COUNT field is decreased
718 * correctly and reaches 0 when data is forwarded to the video port only
719 * but no interrupt arrives). Maybe a CSI2 hardware bug.
720 */
721 if (csi2->frame_skip) {
722 csi2->frame_skip--;
723 if (csi2->frame_skip == 0) {
724 ctx->format_id = csi2_ctx_map_format(csi2);
725 csi2_ctx_config(isp, csi2, ctx);
726 csi2_ctx_enable(isp, csi2, n, 1);
727 }
728 return;
729 }
730
731 if (csi2->output & CSI2_OUTPUT_MEMORY)
732 csi2_isr_buffer(csi2);
733 }
734
735 /*
736 * omap3isp_csi2_isr - CSI2 interrupt handling.
737 */
738 void omap3isp_csi2_isr(struct isp_csi2_device *csi2)
739 {
740 struct isp_pipeline *pipe = to_isp_pipeline(&csi2->subdev.entity);
741 u32 csi2_irqstatus, cpxio1_irqstatus;
742 struct isp_device *isp = csi2->isp;
743
744 if (!csi2->available)
745 return;
746
747 csi2_irqstatus = isp_reg_readl(isp, csi2->regs1, ISPCSI2_IRQSTATUS);
748 isp_reg_writel(isp, csi2_irqstatus, csi2->regs1, ISPCSI2_IRQSTATUS);
749
750 /* Failure Cases */
751 if (csi2_irqstatus & ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ) {
752 cpxio1_irqstatus = isp_reg_readl(isp, csi2->regs1,
753 ISPCSI2_PHY_IRQSTATUS);
754 isp_reg_writel(isp, cpxio1_irqstatus,
755 csi2->regs1, ISPCSI2_PHY_IRQSTATUS);
756 dev_dbg(isp->dev, "CSI2: ComplexIO Error IRQ %x\n",
757 cpxio1_irqstatus);
758 pipe->error = true;
759 }
760
761 if (csi2_irqstatus & (ISPCSI2_IRQSTATUS_OCP_ERR_IRQ |
762 ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ |
763 ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ |
764 ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ |
765 ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ)) {
766 dev_dbg(isp->dev,
767 "CSI2 Err: OCP:%d, Short_pack:%d, ECC:%d, CPXIO2:%d, FIFO_OVF:%d,\n",
768 (csi2_irqstatus &
769 ISPCSI2_IRQSTATUS_OCP_ERR_IRQ) ? 1 : 0,
770 (csi2_irqstatus &
771 ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ) ? 1 : 0,
772 (csi2_irqstatus &
773 ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ) ? 1 : 0,
774 (csi2_irqstatus &
775 ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ) ? 1 : 0,
776 (csi2_irqstatus &
777 ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ) ? 1 : 0);
778 pipe->error = true;
779 }
780
781 if (omap3isp_module_sync_is_stopping(&csi2->wait, &csi2->stopping))
782 return;
783
784 /* Successful cases */
785 if (csi2_irqstatus & ISPCSI2_IRQSTATUS_CONTEXT(0))
786 csi2_isr_ctx(csi2, &csi2->contexts[0]);
787
788 if (csi2_irqstatus & ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ)
789 dev_dbg(isp->dev, "CSI2: ECC correction done\n");
790 }
791
792 /* -----------------------------------------------------------------------------
793 * ISP video operations
794 */
795
796 /*
797 * csi2_queue - Queues the first buffer when using memory output
798 * @video: The video node
799 * @buffer: buffer to queue
800 */
801 static int csi2_queue(struct isp_video *video, struct isp_buffer *buffer)
802 {
803 struct isp_device *isp = video->isp;
804 struct isp_csi2_device *csi2 = &isp->isp_csi2a;
805
806 csi2_set_outaddr(csi2, buffer->dma);
807
808 /*
809 * If streaming was enabled before there was a buffer queued
810 * or underrun happened in the ISR, the hardware was not enabled
811 * and DMA queue flag ISP_VIDEO_DMAQUEUE_UNDERRUN is still set.
812 * Enable it now.
813 */
814 if (csi2->video_out.dmaqueue_flags & ISP_VIDEO_DMAQUEUE_UNDERRUN) {
815 /* Enable / disable context 0 and IRQs */
816 csi2_if_enable(isp, csi2, 1);
817 csi2_ctx_enable(isp, csi2, 0, 1);
818 isp_video_dmaqueue_flags_clr(&csi2->video_out);
819 }
820
821 return 0;
822 }
823
824 static const struct isp_video_operations csi2_ispvideo_ops = {
825 .queue = csi2_queue,
826 };
827
828 /* -----------------------------------------------------------------------------
829 * V4L2 subdev operations
830 */
831
832 static struct v4l2_mbus_framefmt *
833 __csi2_get_format(struct isp_csi2_device *csi2, struct v4l2_subdev_pad_config *cfg,
834 unsigned int pad, enum v4l2_subdev_format_whence which)
835 {
836 if (which == V4L2_SUBDEV_FORMAT_TRY)
837 return v4l2_subdev_get_try_format(&csi2->subdev, cfg, pad);
838 else
839 return &csi2->formats[pad];
840 }
841
842 static void
843 csi2_try_format(struct isp_csi2_device *csi2, struct v4l2_subdev_pad_config *cfg,
844 unsigned int pad, struct v4l2_mbus_framefmt *fmt,
845 enum v4l2_subdev_format_whence which)
846 {
847 u32 pixelcode;
848 struct v4l2_mbus_framefmt *format;
849 const struct isp_format_info *info;
850 unsigned int i;
851
852 switch (pad) {
853 case CSI2_PAD_SINK:
854 /* Clamp the width and height to valid range (1-8191). */
855 for (i = 0; i < ARRAY_SIZE(csi2_input_fmts); i++) {
856 if (fmt->code == csi2_input_fmts[i])
857 break;
858 }
859
860 /* If not found, use SGRBG10 as default */
861 if (i >= ARRAY_SIZE(csi2_input_fmts))
862 fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
863
864 fmt->width = clamp_t(u32, fmt->width, 1, 8191);
865 fmt->height = clamp_t(u32, fmt->height, 1, 8191);
866 break;
867
868 case CSI2_PAD_SOURCE:
869 /* Source format same as sink format, except for DPCM
870 * compression.
871 */
872 pixelcode = fmt->code;
873 format = __csi2_get_format(csi2, cfg, CSI2_PAD_SINK, which);
874 memcpy(fmt, format, sizeof(*fmt));
875
876 /*
877 * Only Allow DPCM decompression, and check that the
878 * pattern is preserved
879 */
880 info = omap3isp_video_format_info(fmt->code);
881 if (info->uncompressed == pixelcode)
882 fmt->code = pixelcode;
883 break;
884 }
885
886 /* RGB, non-interlaced */
887 fmt->colorspace = V4L2_COLORSPACE_SRGB;
888 fmt->field = V4L2_FIELD_NONE;
889 }
890
891 /*
892 * csi2_enum_mbus_code - Handle pixel format enumeration
893 * @sd : pointer to v4l2 subdev structure
894 * @cfg: V4L2 subdev pad configuration
895 * @code : pointer to v4l2_subdev_mbus_code_enum structure
896 * return -EINVAL or zero on success
897 */
898 static int csi2_enum_mbus_code(struct v4l2_subdev *sd,
899 struct v4l2_subdev_pad_config *cfg,
900 struct v4l2_subdev_mbus_code_enum *code)
901 {
902 struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
903 struct v4l2_mbus_framefmt *format;
904 const struct isp_format_info *info;
905
906 if (code->pad == CSI2_PAD_SINK) {
907 if (code->index >= ARRAY_SIZE(csi2_input_fmts))
908 return -EINVAL;
909
910 code->code = csi2_input_fmts[code->index];
911 } else {
912 format = __csi2_get_format(csi2, cfg, CSI2_PAD_SINK,
913 code->which);
914 switch (code->index) {
915 case 0:
916 /* Passthrough sink pad code */
917 code->code = format->code;
918 break;
919 case 1:
920 /* Uncompressed code */
921 info = omap3isp_video_format_info(format->code);
922 if (info->uncompressed == format->code)
923 return -EINVAL;
924
925 code->code = info->uncompressed;
926 break;
927 default:
928 return -EINVAL;
929 }
930 }
931
932 return 0;
933 }
934
935 static int csi2_enum_frame_size(struct v4l2_subdev *sd,
936 struct v4l2_subdev_pad_config *cfg,
937 struct v4l2_subdev_frame_size_enum *fse)
938 {
939 struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
940 struct v4l2_mbus_framefmt format;
941
942 if (fse->index != 0)
943 return -EINVAL;
944
945 format.code = fse->code;
946 format.width = 1;
947 format.height = 1;
948 csi2_try_format(csi2, cfg, fse->pad, &format, fse->which);
949 fse->min_width = format.width;
950 fse->min_height = format.height;
951
952 if (format.code != fse->code)
953 return -EINVAL;
954
955 format.code = fse->code;
956 format.width = -1;
957 format.height = -1;
958 csi2_try_format(csi2, cfg, fse->pad, &format, fse->which);
959 fse->max_width = format.width;
960 fse->max_height = format.height;
961
962 return 0;
963 }
964
965 /*
966 * csi2_get_format - Handle get format by pads subdev method
967 * @sd : pointer to v4l2 subdev structure
968 * @cfg: V4L2 subdev pad configuration
969 * @fmt: pointer to v4l2 subdev format structure
970 * return -EINVAL or zero on success
971 */
972 static int csi2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
973 struct v4l2_subdev_format *fmt)
974 {
975 struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
976 struct v4l2_mbus_framefmt *format;
977
978 format = __csi2_get_format(csi2, cfg, fmt->pad, fmt->which);
979 if (format == NULL)
980 return -EINVAL;
981
982 fmt->format = *format;
983 return 0;
984 }
985
986 /*
987 * csi2_set_format - Handle set format by pads subdev method
988 * @sd : pointer to v4l2 subdev structure
989 * @cfg: V4L2 subdev pad configuration
990 * @fmt: pointer to v4l2 subdev format structure
991 * return -EINVAL or zero on success
992 */
993 static int csi2_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
994 struct v4l2_subdev_format *fmt)
995 {
996 struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
997 struct v4l2_mbus_framefmt *format;
998
999 format = __csi2_get_format(csi2, cfg, fmt->pad, fmt->which);
1000 if (format == NULL)
1001 return -EINVAL;
1002
1003 csi2_try_format(csi2, cfg, fmt->pad, &fmt->format, fmt->which);
1004 *format = fmt->format;
1005
1006 /* Propagate the format from sink to source */
1007 if (fmt->pad == CSI2_PAD_SINK) {
1008 format = __csi2_get_format(csi2, cfg, CSI2_PAD_SOURCE,
1009 fmt->which);
1010 *format = fmt->format;
1011 csi2_try_format(csi2, cfg, CSI2_PAD_SOURCE, format, fmt->which);
1012 }
1013
1014 return 0;
1015 }
1016
1017 /*
1018 * csi2_init_formats - Initialize formats on all pads
1019 * @sd: ISP CSI2 V4L2 subdevice
1020 * @fh: V4L2 subdev file handle
1021 *
1022 * Initialize all pad formats with default values. If fh is not NULL, try
1023 * formats are initialized on the file handle. Otherwise active formats are
1024 * initialized on the device.
1025 */
1026 static int csi2_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
1027 {
1028 struct v4l2_subdev_format format;
1029
1030 memset(&format, 0, sizeof(format));
1031 format.pad = CSI2_PAD_SINK;
1032 format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
1033 format.format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
1034 format.format.width = 4096;
1035 format.format.height = 4096;
1036 csi2_set_format(sd, fh ? fh->pad : NULL, &format);
1037
1038 return 0;
1039 }
1040
1041 /*
1042 * csi2_set_stream - Enable/Disable streaming on the CSI2 module
1043 * @sd: ISP CSI2 V4L2 subdevice
1044 * @enable: ISP pipeline stream state
1045 *
1046 * Return 0 on success or a negative error code otherwise.
1047 */
1048 static int csi2_set_stream(struct v4l2_subdev *sd, int enable)
1049 {
1050 struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
1051 struct isp_device *isp = csi2->isp;
1052 struct isp_video *video_out = &csi2->video_out;
1053
1054 switch (enable) {
1055 case ISP_PIPELINE_STREAM_CONTINUOUS:
1056 if (omap3isp_csiphy_acquire(csi2->phy, &sd->entity) < 0)
1057 return -ENODEV;
1058 if (csi2->output & CSI2_OUTPUT_MEMORY)
1059 omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CSI2A_WRITE);
1060 csi2_configure(csi2);
1061 csi2_print_status(csi2);
1062
1063 /*
1064 * When outputting to memory with no buffer available, let the
1065 * buffer queue handler start the hardware. A DMA queue flag
1066 * ISP_VIDEO_DMAQUEUE_QUEUED will be set as soon as there is
1067 * a buffer available.
1068 */
1069 if (csi2->output & CSI2_OUTPUT_MEMORY &&
1070 !(video_out->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED))
1071 break;
1072 /* Enable context 0 and IRQs */
1073 atomic_set(&csi2->stopping, 0);
1074 csi2_ctx_enable(isp, csi2, 0, 1);
1075 csi2_if_enable(isp, csi2, 1);
1076 isp_video_dmaqueue_flags_clr(video_out);
1077 break;
1078
1079 case ISP_PIPELINE_STREAM_STOPPED:
1080 if (csi2->state == ISP_PIPELINE_STREAM_STOPPED)
1081 return 0;
1082 if (omap3isp_module_sync_idle(&sd->entity, &csi2->wait,
1083 &csi2->stopping))
1084 dev_dbg(isp->dev, "%s: module stop timeout.\n",
1085 sd->name);
1086 csi2_ctx_enable(isp, csi2, 0, 0);
1087 csi2_if_enable(isp, csi2, 0);
1088 csi2_irq_ctx_set(isp, csi2, 0);
1089 omap3isp_csiphy_release(csi2->phy);
1090 isp_video_dmaqueue_flags_clr(video_out);
1091 omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CSI2A_WRITE);
1092 break;
1093 }
1094
1095 csi2->state = enable;
1096 return 0;
1097 }
1098
1099 /* subdev video operations */
1100 static const struct v4l2_subdev_video_ops csi2_video_ops = {
1101 .s_stream = csi2_set_stream,
1102 };
1103
1104 /* subdev pad operations */
1105 static const struct v4l2_subdev_pad_ops csi2_pad_ops = {
1106 .enum_mbus_code = csi2_enum_mbus_code,
1107 .enum_frame_size = csi2_enum_frame_size,
1108 .get_fmt = csi2_get_format,
1109 .set_fmt = csi2_set_format,
1110 };
1111
1112 /* subdev operations */
1113 static const struct v4l2_subdev_ops csi2_ops = {
1114 .video = &csi2_video_ops,
1115 .pad = &csi2_pad_ops,
1116 };
1117
1118 /* subdev internal operations */
1119 static const struct v4l2_subdev_internal_ops csi2_internal_ops = {
1120 .open = csi2_init_formats,
1121 };
1122
1123 /* -----------------------------------------------------------------------------
1124 * Media entity operations
1125 */
1126
1127 /*
1128 * csi2_link_setup - Setup CSI2 connections.
1129 * @entity : Pointer to media entity structure
1130 * @local : Pointer to local pad array
1131 * @remote : Pointer to remote pad array
1132 * @flags : Link flags
1133 * return -EINVAL or zero on success
1134 */
1135 static int csi2_link_setup(struct media_entity *entity,
1136 const struct media_pad *local,
1137 const struct media_pad *remote, u32 flags)
1138 {
1139 struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
1140 struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
1141 struct isp_csi2_ctrl_cfg *ctrl = &csi2->ctrl;
1142 unsigned int index = local->index;
1143
1144 /*
1145 * The ISP core doesn't support pipelines with multiple video outputs.
1146 * Revisit this when it will be implemented, and return -EBUSY for now.
1147 */
1148
1149 /* FIXME: this is actually a hack! */
1150 if (is_media_entity_v4l2_subdev(remote->entity))
1151 index |= 2 << 16;
1152
1153 switch (index) {
1154 case CSI2_PAD_SOURCE:
1155 if (flags & MEDIA_LNK_FL_ENABLED) {
1156 if (csi2->output & ~CSI2_OUTPUT_MEMORY)
1157 return -EBUSY;
1158 csi2->output |= CSI2_OUTPUT_MEMORY;
1159 } else {
1160 csi2->output &= ~CSI2_OUTPUT_MEMORY;
1161 }
1162 break;
1163
1164 case CSI2_PAD_SOURCE | 2 << 16:
1165 if (flags & MEDIA_LNK_FL_ENABLED) {
1166 if (csi2->output & ~CSI2_OUTPUT_CCDC)
1167 return -EBUSY;
1168 csi2->output |= CSI2_OUTPUT_CCDC;
1169 } else {
1170 csi2->output &= ~CSI2_OUTPUT_CCDC;
1171 }
1172 break;
1173
1174 default:
1175 /* Link from camera to CSI2 is fixed... */
1176 return -EINVAL;
1177 }
1178
1179 ctrl->vp_only_enable =
1180 (csi2->output & CSI2_OUTPUT_MEMORY) ? false : true;
1181 ctrl->vp_clk_enable = !!(csi2->output & CSI2_OUTPUT_CCDC);
1182
1183 return 0;
1184 }
1185
1186 /* media operations */
1187 static const struct media_entity_operations csi2_media_ops = {
1188 .link_setup = csi2_link_setup,
1189 .link_validate = v4l2_subdev_link_validate,
1190 };
1191
1192 void omap3isp_csi2_unregister_entities(struct isp_csi2_device *csi2)
1193 {
1194 v4l2_device_unregister_subdev(&csi2->subdev);
1195 omap3isp_video_unregister(&csi2->video_out);
1196 }
1197
1198 int omap3isp_csi2_register_entities(struct isp_csi2_device *csi2,
1199 struct v4l2_device *vdev)
1200 {
1201 int ret;
1202
1203 /* Register the subdev and video nodes. */
1204 ret = v4l2_device_register_subdev(vdev, &csi2->subdev);
1205 if (ret < 0)
1206 goto error;
1207
1208 ret = omap3isp_video_register(&csi2->video_out, vdev);
1209 if (ret < 0)
1210 goto error;
1211
1212 return 0;
1213
1214 error:
1215 omap3isp_csi2_unregister_entities(csi2);
1216 return ret;
1217 }
1218
1219 /* -----------------------------------------------------------------------------
1220 * ISP CSI2 initialisation and cleanup
1221 */
1222
1223 /*
1224 * csi2_init_entities - Initialize subdev and media entity.
1225 * @csi2: Pointer to csi2 structure.
1226 * return -ENOMEM or zero on success
1227 */
1228 static int csi2_init_entities(struct isp_csi2_device *csi2)
1229 {
1230 struct v4l2_subdev *sd = &csi2->subdev;
1231 struct media_pad *pads = csi2->pads;
1232 struct media_entity *me = &sd->entity;
1233 int ret;
1234
1235 v4l2_subdev_init(sd, &csi2_ops);
1236 sd->internal_ops = &csi2_internal_ops;
1237 strlcpy(sd->name, "OMAP3 ISP CSI2a", sizeof(sd->name));
1238
1239 sd->grp_id = 1 << 16; /* group ID for isp subdevs */
1240 v4l2_set_subdevdata(sd, csi2);
1241 sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1242
1243 pads[CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
1244 pads[CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK
1245 | MEDIA_PAD_FL_MUST_CONNECT;
1246
1247 me->ops = &csi2_media_ops;
1248 ret = media_entity_pads_init(me, CSI2_PADS_NUM, pads);
1249 if (ret < 0)
1250 return ret;
1251
1252 csi2_init_formats(sd, NULL);
1253
1254 /* Video device node */
1255 csi2->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
1256 csi2->video_out.ops = &csi2_ispvideo_ops;
1257 csi2->video_out.bpl_alignment = 32;
1258 csi2->video_out.bpl_zero_padding = 1;
1259 csi2->video_out.bpl_max = 0x1ffe0;
1260 csi2->video_out.isp = csi2->isp;
1261 csi2->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 3;
1262
1263 ret = omap3isp_video_init(&csi2->video_out, "CSI2a");
1264 if (ret < 0)
1265 goto error_video;
1266
1267 return 0;
1268
1269 error_video:
1270 media_entity_cleanup(&csi2->subdev.entity);
1271 return ret;
1272 }
1273
1274 /*
1275 * omap3isp_csi2_init - Routine for module driver init
1276 */
1277 int omap3isp_csi2_init(struct isp_device *isp)
1278 {
1279 struct isp_csi2_device *csi2a = &isp->isp_csi2a;
1280 struct isp_csi2_device *csi2c = &isp->isp_csi2c;
1281 int ret;
1282
1283 csi2a->isp = isp;
1284 csi2a->available = 1;
1285 csi2a->regs1 = OMAP3_ISP_IOMEM_CSI2A_REGS1;
1286 csi2a->regs2 = OMAP3_ISP_IOMEM_CSI2A_REGS2;
1287 csi2a->phy = &isp->isp_csiphy2;
1288 csi2a->state = ISP_PIPELINE_STREAM_STOPPED;
1289 init_waitqueue_head(&csi2a->wait);
1290
1291 ret = csi2_init_entities(csi2a);
1292 if (ret < 0)
1293 return ret;
1294
1295 if (isp->revision == ISP_REVISION_15_0) {
1296 csi2c->isp = isp;
1297 csi2c->available = 1;
1298 csi2c->regs1 = OMAP3_ISP_IOMEM_CSI2C_REGS1;
1299 csi2c->regs2 = OMAP3_ISP_IOMEM_CSI2C_REGS2;
1300 csi2c->phy = &isp->isp_csiphy1;
1301 csi2c->state = ISP_PIPELINE_STREAM_STOPPED;
1302 init_waitqueue_head(&csi2c->wait);
1303 }
1304
1305 return 0;
1306 }
1307
1308 /*
1309 * omap3isp_csi2_cleanup - Routine for module driver cleanup
1310 */
1311 void omap3isp_csi2_cleanup(struct isp_device *isp)
1312 {
1313 struct isp_csi2_device *csi2a = &isp->isp_csi2a;
1314
1315 omap3isp_video_cleanup(&csi2a->video_out);
1316 media_entity_cleanup(&csi2a->subdev.entity);
1317 }
Linux with added FPC-III support