vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console

[linux/fpc-iii.git] / drivers / gpu / drm / i915 / intel_dpio_phy.c

/*
 * Copyright © 2014-2016 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 */

#include "intel_drv.h"

/**
 * DOC: DPIO
 *
 * VLV, CHV and BXT have slightly peculiar display PHYs for driving DP/HDMI
 * ports. DPIO is the name given to such a display PHY. These PHYs
 * don't follow the standard programming model using direct MMIO
 * registers, and instead their registers must be accessed trough IOSF
 * sideband. VLV has one such PHY for driving ports B and C, and CHV
 * adds another PHY for driving port D. Each PHY responds to specific
 * IOSF-SB port.
 *
 * Each display PHY is made up of one or two channels. Each channel
 * houses a common lane part which contains the PLL and other common
 * logic. CH0 common lane also contains the IOSF-SB logic for the
 * Common Register Interface (CRI) ie. the DPIO registers. CRI clock
 * must be running when any DPIO registers are accessed.
 *
 * In addition to having their own registers, the PHYs are also
 * controlled through some dedicated signals from the display
 * controller. These include PLL reference clock enable, PLL enable,
 * and CRI clock selection, for example.
 *
 * Eeach channel also has two splines (also called data lanes), and
 * each spline is made up of one Physical Access Coding Sub-Layer
 * (PCS) block and two TX lanes. So each channel has two PCS blocks
 * and four TX lanes. The TX lanes are used as DP lanes or TMDS
 * data/clock pairs depending on the output type.
 *
 * Additionally the PHY also contains an AUX lane with AUX blocks
 * for each channel. This is used for DP AUX communication, but
 * this fact isn't really relevant for the driver since AUX is
 * controlled from the display controller side. No DPIO registers
 * need to be accessed during AUX communication,
 *
 * Generally on VLV/CHV the common lane corresponds to the pipe and
 * the spline (PCS/TX) corresponds to the port.
 *
 * For dual channel PHY (VLV/CHV):
 *
 *  pipe A == CMN/PLL/REF CH0
 *
 *  pipe B == CMN/PLL/REF CH1
 *
 *  port B == PCS/TX CH0
 *
 *  port C == PCS/TX CH1
 *
 * This is especially important when we cross the streams
 * ie. drive port B with pipe B, or port C with pipe A.
 *
 * For single channel PHY (CHV):
 *
 *  pipe C == CMN/PLL/REF CH0
 *
 *  port D == PCS/TX CH0
 *
 * On BXT the entire PHY channel corresponds to the port. That means
 * the PLL is also now associated with the port rather than the pipe,
 * and so the clock needs to be routed to the appropriate transcoder.
 * Port A PLL is directly connected to transcoder EDP and port B/C
 * PLLs can be routed to any transcoder A/B/C.
 *
 * Note: DDI0 is digital port B, DD1 is digital port C, and DDI2 is
 * digital port D (CHV) or port A (BXT). ::
 *
 *
 *     Dual channel PHY (VLV/CHV/BXT)
 *     ---------------------------------
 *     |      CH0      |      CH1      |
 *     |  CMN/PLL/REF  |  CMN/PLL/REF  |
 *     |---------------|---------------| Display PHY
 *     | PCS01 | PCS23 | PCS01 | PCS23 |
 *     |-------|-------|-------|-------|
 *     |TX0|TX1|TX2|TX3|TX0|TX1|TX2|TX3|
 *     ---------------------------------
 *     |     DDI0      |     DDI1      | DP/HDMI ports
 *     ---------------------------------
 *
 *     Single channel PHY (CHV/BXT)
 *     -----------------
 *     |      CH0      |
 *     |  CMN/PLL/REF  |
 *     |---------------| Display PHY
 *     | PCS01 | PCS23 |
 *     |-------|-------|
 *     |TX0|TX1|TX2|TX3|
 *     -----------------
 *     |     DDI2      | DP/HDMI port
 *     -----------------
 */

/**
 * struct bxt_ddi_phy_info - Hold info for a broxton DDI phy
 */
struct bxt_ddi_phy_info {
        /**
         * @dual_channel: true if this phy has a second channel.
         */
        bool dual_channel;

        /**
         * @rcomp_phy: If -1, indicates this phy has its own rcomp resistor.
         * Otherwise the GRC value will be copied from the phy indicated by
         * this field.
         */
        enum dpio_phy rcomp_phy;

        /**
         * @reset_delay: delay in us to wait before setting the common reset
         * bit in BXT_PHY_CTL_FAMILY, which effectively enables the phy.
         */
        int reset_delay;

        /**
         * @pwron_mask: Mask with the appropriate bit set that would cause the
         * punit to power this phy if written to BXT_P_CR_GT_DISP_PWRON.
         */
        u32 pwron_mask;

        /**
         * @channel: struct containing per channel information.
         */
        struct {
                /**
                 * @channel.port: which port maps to this channel.
                 */
                enum port port;
        } channel[2];
};

static const struct bxt_ddi_phy_info bxt_ddi_phy_info[] = {
        [DPIO_PHY0] = {
                .dual_channel = true,
                .rcomp_phy = DPIO_PHY1,
                .pwron_mask = BIT(0),

                .channel = {
                        [DPIO_CH0] = { .port = PORT_B },
                        [DPIO_CH1] = { .port = PORT_C },
                }
        },
        [DPIO_PHY1] = {
                .dual_channel = false,
                .rcomp_phy = -1,
                .pwron_mask = BIT(1),

                .channel = {
                        [DPIO_CH0] = { .port = PORT_A },
                }
        },
};

static const struct bxt_ddi_phy_info glk_ddi_phy_info[] = {
        [DPIO_PHY0] = {
                .dual_channel = false,
                .rcomp_phy = DPIO_PHY1,
                .pwron_mask = BIT(0),
                .reset_delay = 20,

                .channel = {
                        [DPIO_CH0] = { .port = PORT_B },
                }
        },
        [DPIO_PHY1] = {
                .dual_channel = false,
                .rcomp_phy = -1,
                .pwron_mask = BIT(3),
                .reset_delay = 20,

                .channel = {
                        [DPIO_CH0] = { .port = PORT_A },
                }
        },
        [DPIO_PHY2] = {
                .dual_channel = false,
                .rcomp_phy = DPIO_PHY1,
                .pwron_mask = BIT(1),
                .reset_delay = 20,

                .channel = {
                        [DPIO_CH0] = { .port = PORT_C },
                }
        },
};

static const struct bxt_ddi_phy_info *
bxt_get_phy_list(struct drm_i915_private *dev_priv, int *count)
{
        if (IS_GEMINILAKE(dev_priv)) {
                *count =  ARRAY_SIZE(glk_ddi_phy_info);
                return glk_ddi_phy_info;
        } else {
                *count =  ARRAY_SIZE(bxt_ddi_phy_info);
                return bxt_ddi_phy_info;
        }
}

static const struct bxt_ddi_phy_info *
bxt_get_phy_info(struct drm_i915_private *dev_priv, enum dpio_phy phy)
{
        int count;
        const struct bxt_ddi_phy_info *phy_list =
                bxt_get_phy_list(dev_priv, &count);

        return &phy_list[phy];
}

void bxt_port_to_phy_channel(struct drm_i915_private *dev_priv, enum port port,
                             enum dpio_phy *phy, enum dpio_channel *ch)
{
        const struct bxt_ddi_phy_info *phy_info, *phys;
        int i, count;

        phys = bxt_get_phy_list(dev_priv, &count);

        for (i = 0; i < count; i++) {
                phy_info = &phys[i];

                if (port == phy_info->channel[DPIO_CH0].port) {
                        *phy = i;
                        *ch = DPIO_CH0;
                        return;
                }

                if (phy_info->dual_channel &&
                    port == phy_info->channel[DPIO_CH1].port) {
                        *phy = i;
                        *ch = DPIO_CH1;
                        return;
                }
        }

        WARN(1, "PHY not found for PORT %c", port_name(port));
        *phy = DPIO_PHY0;
        *ch = DPIO_CH0;
}

void bxt_ddi_phy_set_signal_level(struct drm_i915_private *dev_priv,
                                  enum port port, u32 margin, u32 scale,
                                  u32 enable, u32 deemphasis)
{
        u32 val;
        enum dpio_phy phy;
        enum dpio_channel ch;

        bxt_port_to_phy_channel(dev_priv, port, &phy, &ch);

        /*
         * While we write to the group register to program all lanes at once we
         * can read only lane registers and we pick lanes 0/1 for that.
         */
        val = I915_READ(BXT_PORT_PCS_DW10_LN01(phy, ch));
        val &= ~(TX2_SWING_CALC_INIT | TX1_SWING_CALC_INIT);
        I915_WRITE(BXT_PORT_PCS_DW10_GRP(phy, ch), val);

        val = I915_READ(BXT_PORT_TX_DW2_LN0(phy, ch));
        val &= ~(MARGIN_000 | UNIQ_TRANS_SCALE);
        val |= margin << MARGIN_000_SHIFT | scale << UNIQ_TRANS_SCALE_SHIFT;
        I915_WRITE(BXT_PORT_TX_DW2_GRP(phy, ch), val);

        val = I915_READ(BXT_PORT_TX_DW3_LN0(phy, ch));
        val &= ~SCALE_DCOMP_METHOD;
        if (enable)
                val |= SCALE_DCOMP_METHOD;

        if ((val & UNIQUE_TRANGE_EN_METHOD) && !(val & SCALE_DCOMP_METHOD))
                DRM_ERROR("Disabled scaling while ouniqetrangenmethod was set");

        I915_WRITE(BXT_PORT_TX_DW3_GRP(phy, ch), val);

        val = I915_READ(BXT_PORT_TX_DW4_LN0(phy, ch));
        val &= ~DE_EMPHASIS;
        val |= deemphasis << DEEMPH_SHIFT;
        I915_WRITE(BXT_PORT_TX_DW4_GRP(phy, ch), val);

        val = I915_READ(BXT_PORT_PCS_DW10_LN01(phy, ch));
        val |= TX2_SWING_CALC_INIT | TX1_SWING_CALC_INIT;
        I915_WRITE(BXT_PORT_PCS_DW10_GRP(phy, ch), val);
}

bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv,
                            enum dpio_phy phy)
{
        const struct bxt_ddi_phy_info *phy_info;

        phy_info = bxt_get_phy_info(dev_priv, phy);

        if (!(I915_READ(BXT_P_CR_GT_DISP_PWRON) & phy_info->pwron_mask))
                return false;

        if ((I915_READ(BXT_PORT_CL1CM_DW0(phy)) &
             (PHY_POWER_GOOD | PHY_RESERVED)) != PHY_POWER_GOOD) {
                DRM_DEBUG_DRIVER("DDI PHY %d powered, but power hasn't settled\n",
                                 phy);

                return false;
        }

        if (!(I915_READ(BXT_PHY_CTL_FAMILY(phy)) & COMMON_RESET_DIS)) {
                DRM_DEBUG_DRIVER("DDI PHY %d powered, but still in reset\n",
                                 phy);

                return false;
        }

        return true;
}

static u32 bxt_get_grc(struct drm_i915_private *dev_priv, enum dpio_phy phy)
{
        u32 val = I915_READ(BXT_PORT_REF_DW6(phy));

        return (val & GRC_CODE_MASK) >> GRC_CODE_SHIFT;
}

static void bxt_phy_wait_grc_done(struct drm_i915_private *dev_priv,
                                  enum dpio_phy phy)
{
        if (intel_wait_for_register(dev_priv,
                                    BXT_PORT_REF_DW3(phy),
                                    GRC_DONE, GRC_DONE,
                                    10))
                DRM_ERROR("timeout waiting for PHY%d GRC\n", phy);
}

static void _bxt_ddi_phy_init(struct drm_i915_private *dev_priv,
                              enum dpio_phy phy)
{
        const struct bxt_ddi_phy_info *phy_info;
        u32 val;

        phy_info = bxt_get_phy_info(dev_priv, phy);

        if (bxt_ddi_phy_is_enabled(dev_priv, phy)) {
                /* Still read out the GRC value for state verification */
                if (phy_info->rcomp_phy != -1)
                        dev_priv->bxt_phy_grc = bxt_get_grc(dev_priv, phy);

                if (bxt_ddi_phy_verify_state(dev_priv, phy)) {
                        DRM_DEBUG_DRIVER("DDI PHY %d already enabled, "
                                         "won't reprogram it\n", phy);
                        return;
                }

                DRM_DEBUG_DRIVER("DDI PHY %d enabled with invalid state, "
                                 "force reprogramming it\n", phy);
        }

        val = I915_READ(BXT_P_CR_GT_DISP_PWRON);
        val |= phy_info->pwron_mask;
        I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val);

        /*
         * The PHY registers start out inaccessible and respond to reads with
         * all 1s.  Eventually they become accessible as they power up, then
         * the reserved bit will give the default 0.  Poll on the reserved bit
         * becoming 0 to find when the PHY is accessible.
         * The flag should get set in 100us according to the HW team, but
         * use 1ms due to occasional timeouts observed with that.
         */
        if (intel_wait_for_register_fw(dev_priv, BXT_PORT_CL1CM_DW0(phy),
                                       PHY_RESERVED | PHY_POWER_GOOD,
                                       PHY_POWER_GOOD,
                                       1))
                DRM_ERROR("timeout during PHY%d power on\n", phy);

        /* Program PLL Rcomp code offset */
        val = I915_READ(BXT_PORT_CL1CM_DW9(phy));
        val &= ~IREF0RC_OFFSET_MASK;
        val |= 0xE4 << IREF0RC_OFFSET_SHIFT;
        I915_WRITE(BXT_PORT_CL1CM_DW9(phy), val);

        val = I915_READ(BXT_PORT_CL1CM_DW10(phy));
        val &= ~IREF1RC_OFFSET_MASK;
        val |= 0xE4 << IREF1RC_OFFSET_SHIFT;
        I915_WRITE(BXT_PORT_CL1CM_DW10(phy), val);

        /* Program power gating */
        val = I915_READ(BXT_PORT_CL1CM_DW28(phy));
        val |= OCL1_POWER_DOWN_EN | DW28_OLDO_DYN_PWR_DOWN_EN |
                SUS_CLK_CONFIG;
        I915_WRITE(BXT_PORT_CL1CM_DW28(phy), val);

        if (phy_info->dual_channel) {
                val = I915_READ(BXT_PORT_CL2CM_DW6(phy));
                val |= DW6_OLDO_DYN_PWR_DOWN_EN;
                I915_WRITE(BXT_PORT_CL2CM_DW6(phy), val);
        }

        if (phy_info->rcomp_phy != -1) {
                uint32_t grc_code;

                bxt_phy_wait_grc_done(dev_priv, phy_info->rcomp_phy);

                /*
                 * PHY0 isn't connected to an RCOMP resistor so copy over
                 * the corresponding calibrated value from PHY1, and disable
                 * the automatic calibration on PHY0.
                 */
                val = dev_priv->bxt_phy_grc = bxt_get_grc(dev_priv,
                                                          phy_info->rcomp_phy);
                grc_code = val << GRC_CODE_FAST_SHIFT |
                           val << GRC_CODE_SLOW_SHIFT |
                           val;
                I915_WRITE(BXT_PORT_REF_DW6(phy), grc_code);

                val = I915_READ(BXT_PORT_REF_DW8(phy));
                val |= GRC_DIS | GRC_RDY_OVRD;
                I915_WRITE(BXT_PORT_REF_DW8(phy), val);
        }

        if (phy_info->reset_delay)
                udelay(phy_info->reset_delay);

        val = I915_READ(BXT_PHY_CTL_FAMILY(phy));
        val |= COMMON_RESET_DIS;
        I915_WRITE(BXT_PHY_CTL_FAMILY(phy), val);
}

void bxt_ddi_phy_uninit(struct drm_i915_private *dev_priv, enum dpio_phy phy)
{
        const struct bxt_ddi_phy_info *phy_info;
        uint32_t val;

        phy_info = bxt_get_phy_info(dev_priv, phy);

        val = I915_READ(BXT_PHY_CTL_FAMILY(phy));
        val &= ~COMMON_RESET_DIS;
        I915_WRITE(BXT_PHY_CTL_FAMILY(phy), val);

        val = I915_READ(BXT_P_CR_GT_DISP_PWRON);
        val &= ~phy_info->pwron_mask;
        I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val);
}

void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum dpio_phy phy)
{
        const struct bxt_ddi_phy_info *phy_info =
                bxt_get_phy_info(dev_priv, phy);
        enum dpio_phy rcomp_phy = phy_info->rcomp_phy;
        bool was_enabled;

        lockdep_assert_held(&dev_priv->power_domains.lock);

        was_enabled = true;
        if (rcomp_phy != -1)
                was_enabled = bxt_ddi_phy_is_enabled(dev_priv, rcomp_phy);

        /*
         * We need to copy the GRC calibration value from rcomp_phy,
         * so make sure it's powered up.
         */
        if (!was_enabled)
                _bxt_ddi_phy_init(dev_priv, rcomp_phy);

        _bxt_ddi_phy_init(dev_priv, phy);

        if (!was_enabled)
                bxt_ddi_phy_uninit(dev_priv, rcomp_phy);
}

static bool __printf(6, 7)
__phy_reg_verify_state(struct drm_i915_private *dev_priv, enum dpio_phy phy,
                       i915_reg_t reg, u32 mask, u32 expected,
                       const char *reg_fmt, ...)
{
        struct va_format vaf;
        va_list args;
        u32 val;

        val = I915_READ(reg);
        if ((val & mask) == expected)
                return true;

        va_start(args, reg_fmt);
        vaf.fmt = reg_fmt;
        vaf.va = &args;

        DRM_DEBUG_DRIVER("DDI PHY %d reg %pV [%08x] state mismatch: "
                         "current %08x, expected %08x (mask %08x)\n",
                         phy, &vaf, reg.reg, val, (val & ~mask) | expected,
                         mask);

        va_end(args);

        return false;
}

bool bxt_ddi_phy_verify_state(struct drm_i915_private *dev_priv,
                              enum dpio_phy phy)
{
        const struct bxt_ddi_phy_info *phy_info;
        uint32_t mask;
        bool ok;

        phy_info = bxt_get_phy_info(dev_priv, phy);

#define _CHK(reg, mask, exp, fmt, ...)                                  \
        __phy_reg_verify_state(dev_priv, phy, reg, mask, exp, fmt,      \
                               ## __VA_ARGS__)

        if (!bxt_ddi_phy_is_enabled(dev_priv, phy))
                return false;

        ok = true;

        /* PLL Rcomp code offset */
        ok &= _CHK(BXT_PORT_CL1CM_DW9(phy),
                    IREF0RC_OFFSET_MASK, 0xe4 << IREF0RC_OFFSET_SHIFT,
                    "BXT_PORT_CL1CM_DW9(%d)", phy);
        ok &= _CHK(BXT_PORT_CL1CM_DW10(phy),
                    IREF1RC_OFFSET_MASK, 0xe4 << IREF1RC_OFFSET_SHIFT,
                    "BXT_PORT_CL1CM_DW10(%d)", phy);

        /* Power gating */
        mask = OCL1_POWER_DOWN_EN | DW28_OLDO_DYN_PWR_DOWN_EN | SUS_CLK_CONFIG;
        ok &= _CHK(BXT_PORT_CL1CM_DW28(phy), mask, mask,
                    "BXT_PORT_CL1CM_DW28(%d)", phy);

        if (phy_info->dual_channel)
                ok &= _CHK(BXT_PORT_CL2CM_DW6(phy),
                           DW6_OLDO_DYN_PWR_DOWN_EN, DW6_OLDO_DYN_PWR_DOWN_EN,
                           "BXT_PORT_CL2CM_DW6(%d)", phy);

        if (phy_info->rcomp_phy != -1) {
                u32 grc_code = dev_priv->bxt_phy_grc;

                grc_code = grc_code << GRC_CODE_FAST_SHIFT |
                           grc_code << GRC_CODE_SLOW_SHIFT |
                           grc_code;
                mask = GRC_CODE_FAST_MASK | GRC_CODE_SLOW_MASK |
                       GRC_CODE_NOM_MASK;
                ok &= _CHK(BXT_PORT_REF_DW6(phy), mask, grc_code,
                           "BXT_PORT_REF_DW6(%d)", phy);

                mask = GRC_DIS | GRC_RDY_OVRD;
                ok &= _CHK(BXT_PORT_REF_DW8(phy), mask, mask,
                            "BXT_PORT_REF_DW8(%d)", phy);
        }

        return ok;
#undef _CHK
}

uint8_t
bxt_ddi_phy_calc_lane_lat_optim_mask(uint8_t lane_count)
{
        switch (lane_count) {
        case 1:
                return 0;
        case 2:
                return BIT(2) | BIT(0);
        case 4:
                return BIT(3) | BIT(2) | BIT(0);
        default:
                MISSING_CASE(lane_count);

                return 0;
        }
}

void bxt_ddi_phy_set_lane_optim_mask(struct intel_encoder *encoder,
                                     uint8_t lane_lat_optim_mask)
{
        struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
        enum port port = encoder->port;
        enum dpio_phy phy;
        enum dpio_channel ch;
        int lane;

        bxt_port_to_phy_channel(dev_priv, port, &phy, &ch);

        for (lane = 0; lane < 4; lane++) {
                u32 val = I915_READ(BXT_PORT_TX_DW14_LN(phy, ch, lane));

                /*
                 * Note that on CHV this flag is called UPAR, but has
                 * the same function.
                 */
                val &= ~LATENCY_OPTIM;
                if (lane_lat_optim_mask & BIT(lane))
                        val |= LATENCY_OPTIM;

                I915_WRITE(BXT_PORT_TX_DW14_LN(phy, ch, lane), val);
        }
}

uint8_t
bxt_ddi_phy_get_lane_lat_optim_mask(struct intel_encoder *encoder)
{
        struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
        enum port port = encoder->port;
        enum dpio_phy phy;
        enum dpio_channel ch;
        int lane;
        uint8_t mask;

        bxt_port_to_phy_channel(dev_priv, port, &phy, &ch);

        mask = 0;
        for (lane = 0; lane < 4; lane++) {
                u32 val = I915_READ(BXT_PORT_TX_DW14_LN(phy, ch, lane));

                if (val & LATENCY_OPTIM)
                        mask |= BIT(lane);
        }

        return mask;
}


void chv_set_phy_signal_level(struct intel_encoder *encoder,
                              u32 deemph_reg_value, u32 margin_reg_value,
                              bool uniq_trans_scale)
{
        struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
        struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
        struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
        enum dpio_channel ch = vlv_dport_to_channel(dport);
        enum pipe pipe = intel_crtc->pipe;
        u32 val;
        int i;

        mutex_lock(&dev_priv->sb_lock);

        /* Clear calc init */
        val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
        val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
        val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
        val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
        vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);

        if (intel_crtc->config->lane_count > 2) {
                val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
                val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
                val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
                val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
                vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
        }

        val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
        val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
        val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
        vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);

        if (intel_crtc->config->lane_count > 2) {
                val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
                val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
                val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
                vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
        }

        /* Program swing deemph */
        for (i = 0; i < intel_crtc->config->lane_count; i++) {
                val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
                val &= ~DPIO_SWING_DEEMPH9P5_MASK;
                val |= deemph_reg_value << DPIO_SWING_DEEMPH9P5_SHIFT;
                vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val);
        }

        /* Program swing margin */
        for (i = 0; i < intel_crtc->config->lane_count; i++) {
                val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));

                val &= ~DPIO_SWING_MARGIN000_MASK;
                val |= margin_reg_value << DPIO_SWING_MARGIN000_SHIFT;

                /*
                 * Supposedly this value shouldn't matter when unique transition
                 * scale is disabled, but in fact it does matter. Let's just
                 * always program the same value and hope it's OK.
                 */
                val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);
                val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT;

                vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
        }

        /*
         * The document said it needs to set bit 27 for ch0 and bit 26
         * for ch1. Might be a typo in the doc.
         * For now, for this unique transition scale selection, set bit
         * 27 for ch0 and ch1.
         */
        for (i = 0; i < intel_crtc->config->lane_count; i++) {
                val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
                if (uniq_trans_scale)
                        val |= DPIO_TX_UNIQ_TRANS_SCALE_EN;
                else
                        val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;
                vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
        }

        /* Start swing calculation */
        val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
        val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
        vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);

        if (intel_crtc->config->lane_count > 2) {
                val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
                val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
                vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
        }

        mutex_unlock(&dev_priv->sb_lock);

}

void chv_data_lane_soft_reset(struct intel_encoder *encoder,
                              const struct intel_crtc_state *crtc_state,
                              bool reset)
{
        struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
        enum dpio_channel ch = vlv_dport_to_channel(enc_to_dig_port(&encoder->base));
        struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
        enum pipe pipe = crtc->pipe;
        uint32_t val;

        val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW0(ch));
        if (reset)
                val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
        else
                val |= DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET;
        vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW0(ch), val);

        if (crtc->config->lane_count > 2) {
                val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW0(ch));
                if (reset)
                        val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
                else
                        val |= DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET;
                vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val);
        }

        val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch));
        val |= CHV_PCS_REQ_SOFTRESET_EN;
        if (reset)
                val &= ~DPIO_PCS_CLK_SOFT_RESET;
        else
                val |= DPIO_PCS_CLK_SOFT_RESET;
        vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW1(ch), val);

        if (crtc->config->lane_count > 2) {
                val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW1(ch));
                val |= CHV_PCS_REQ_SOFTRESET_EN;
                if (reset)
                        val &= ~DPIO_PCS_CLK_SOFT_RESET;
                else
                        val |= DPIO_PCS_CLK_SOFT_RESET;
                vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val);
        }
}

void chv_phy_pre_pll_enable(struct intel_encoder *encoder,
                            const struct intel_crtc_state *crtc_state)
{
        struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
        struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
        struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
        enum dpio_channel ch = vlv_dport_to_channel(dport);
        enum pipe pipe = crtc->pipe;
        unsigned int lane_mask =
                intel_dp_unused_lane_mask(crtc_state->lane_count);
        u32 val;

        /*
         * Must trick the second common lane into life.
         * Otherwise we can't even access the PLL.
         */
        if (ch == DPIO_CH0 && pipe == PIPE_B)
                dport->release_cl2_override =
                        !chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, true);

        chv_phy_powergate_lanes(encoder, true, lane_mask);

        mutex_lock(&dev_priv->sb_lock);

        /* Assert data lane reset */
        chv_data_lane_soft_reset(encoder, crtc_state, true);

        /* program left/right clock distribution */
        if (pipe != PIPE_B) {
                val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
                val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
                if (ch == DPIO_CH0)
                        val |= CHV_BUFLEFTENA1_FORCE;
                if (ch == DPIO_CH1)
                        val |= CHV_BUFRIGHTENA1_FORCE;
                vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
        } else {
                val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
                val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
                if (ch == DPIO_CH0)
                        val |= CHV_BUFLEFTENA2_FORCE;
                if (ch == DPIO_CH1)
                        val |= CHV_BUFRIGHTENA2_FORCE;
                vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
        }

        /* program clock channel usage */
        val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(ch));
        val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
        if (pipe != PIPE_B)
                val &= ~CHV_PCS_USEDCLKCHANNEL;
        else
                val |= CHV_PCS_USEDCLKCHANNEL;
        vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val);

        if (crtc_state->lane_count > 2) {
                val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch));
                val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
                if (pipe != PIPE_B)
                        val &= ~CHV_PCS_USEDCLKCHANNEL;
                else
                        val |= CHV_PCS_USEDCLKCHANNEL;
                vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val);
        }

        /*
         * This a a bit weird since generally CL
         * matches the pipe, but here we need to
         * pick the CL based on the port.
         */
        val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW19(ch));
        if (pipe != PIPE_B)
                val &= ~CHV_CMN_USEDCLKCHANNEL;
        else
                val |= CHV_CMN_USEDCLKCHANNEL;
        vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val);

        mutex_unlock(&dev_priv->sb_lock);
}

void chv_phy_pre_encoder_enable(struct intel_encoder *encoder,
                                const struct intel_crtc_state *crtc_state)
{
        struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
        struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
        struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
        struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
        enum dpio_channel ch = vlv_dport_to_channel(dport);
        enum pipe pipe = crtc->pipe;
        int data, i, stagger;
        u32 val;

        mutex_lock(&dev_priv->sb_lock);

        /* allow hardware to manage TX FIFO reset source */
        val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
        val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
        vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);

        if (crtc_state->lane_count > 2) {
                val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
                val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
                vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
        }

        /* Program Tx lane latency optimal setting*/
        for (i = 0; i < crtc_state->lane_count; i++) {
                /* Set the upar bit */
                if (crtc_state->lane_count == 1)
                        data = 0x0;
                else
                        data = (i == 1) ? 0x0 : 0x1;
                vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i),
                                data << DPIO_UPAR_SHIFT);
        }

        /* Data lane stagger programming */
        if (crtc_state->port_clock > 270000)
                stagger = 0x18;
        else if (crtc_state->port_clock > 135000)
                stagger = 0xd;
        else if (crtc_state->port_clock > 67500)
                stagger = 0x7;
        else if (crtc_state->port_clock > 33750)
                stagger = 0x4;
        else
                stagger = 0x2;

        val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
        val |= DPIO_TX2_STAGGER_MASK(0x1f);
        vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);

        if (crtc_state->lane_count > 2) {
                val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
                val |= DPIO_TX2_STAGGER_MASK(0x1f);
                vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
        }

        vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW12(ch),
                       DPIO_LANESTAGGER_STRAP(stagger) |
                       DPIO_LANESTAGGER_STRAP_OVRD |
                       DPIO_TX1_STAGGER_MASK(0x1f) |
                       DPIO_TX1_STAGGER_MULT(6) |
                       DPIO_TX2_STAGGER_MULT(0));

        if (crtc_state->lane_count > 2) {
                vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW12(ch),
                               DPIO_LANESTAGGER_STRAP(stagger) |
                               DPIO_LANESTAGGER_STRAP_OVRD |
                               DPIO_TX1_STAGGER_MASK(0x1f) |
                               DPIO_TX1_STAGGER_MULT(7) |
                               DPIO_TX2_STAGGER_MULT(5));
        }

        /* Deassert data lane reset */
        chv_data_lane_soft_reset(encoder, crtc_state, false);

        mutex_unlock(&dev_priv->sb_lock);
}

void chv_phy_release_cl2_override(struct intel_encoder *encoder)
{
        struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
        struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);

        if (dport->release_cl2_override) {
                chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, false);
                dport->release_cl2_override = false;
        }
}

void chv_phy_post_pll_disable(struct intel_encoder *encoder,
                              const struct intel_crtc_state *old_crtc_state)
{
        struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
        enum pipe pipe = to_intel_crtc(old_crtc_state->base.crtc)->pipe;
        u32 val;

        mutex_lock(&dev_priv->sb_lock);

        /* disable left/right clock distribution */
        if (pipe != PIPE_B) {
                val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
                val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
                vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
        } else {
                val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
                val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
                vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
        }

        mutex_unlock(&dev_priv->sb_lock);

        /*
         * Leave the power down bit cleared for at least one
         * lane so that chv_powergate_phy_ch() will power
         * on something when the channel is otherwise unused.
         * When the port is off and the override is removed
         * the lanes power down anyway, so otherwise it doesn't
         * really matter what the state of power down bits is
         * after this.
         */
        chv_phy_powergate_lanes(encoder, false, 0x0);
}

void vlv_set_phy_signal_level(struct intel_encoder *encoder,
                              u32 demph_reg_value, u32 preemph_reg_value,
                              u32 uniqtranscale_reg_value, u32 tx3_demph)
{
        struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
        struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
        struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
        enum dpio_channel port = vlv_dport_to_channel(dport);
        enum pipe pipe = intel_crtc->pipe;

        mutex_lock(&dev_priv->sb_lock);
        vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x00000000);
        vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(port), demph_reg_value);
        vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(port),
                         uniqtranscale_reg_value);
        vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(port), 0x0C782040);

        if (tx3_demph)
                vlv_dpio_write(dev_priv, pipe, VLV_TX3_DW4(port), tx3_demph);

        vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW11(port), 0x00030000);
        vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), preemph_reg_value);
        vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), DPIO_TX_OCALINIT_EN);
        mutex_unlock(&dev_priv->sb_lock);
}

void vlv_phy_pre_pll_enable(struct intel_encoder *encoder,
                            const struct intel_crtc_state *crtc_state)
{
        struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
        struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
        struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
        enum dpio_channel port = vlv_dport_to_channel(dport);
        enum pipe pipe = crtc->pipe;

        /* Program Tx lane resets to default */
        mutex_lock(&dev_priv->sb_lock);
        vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port),
                         DPIO_PCS_TX_LANE2_RESET |
                         DPIO_PCS_TX_LANE1_RESET);
        vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port),
                         DPIO_PCS_CLK_CRI_RXEB_EIOS_EN |
                         DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN |
                         (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) |
                                 DPIO_PCS_CLK_SOFT_RESET);

        /* Fix up inter-pair skew failure */
        vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW12(port), 0x00750f00);
        vlv_dpio_write(dev_priv, pipe, VLV_TX_DW11(port), 0x00001500);
        vlv_dpio_write(dev_priv, pipe, VLV_TX_DW14(port), 0x40400000);
        mutex_unlock(&dev_priv->sb_lock);
}

void vlv_phy_pre_encoder_enable(struct intel_encoder *encoder,
                                const struct intel_crtc_state *crtc_state)
{
        struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
        struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
        struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
        struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
        enum dpio_channel port = vlv_dport_to_channel(dport);
        enum pipe pipe = crtc->pipe;
        u32 val;

        mutex_lock(&dev_priv->sb_lock);

        /* Enable clock channels for this port */
        val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(port));
        val = 0;
        if (pipe)
                val |= (1<<21);
        else
                val &= ~(1<<21);
        val |= 0x001000c4;
        vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW8(port), val);

        /* Program lane clock */
        vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW14(port), 0x00760018);
        vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888);

        mutex_unlock(&dev_priv->sb_lock);
}

void vlv_phy_reset_lanes(struct intel_encoder *encoder,
                         const struct intel_crtc_state *old_crtc_state)
{
        struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
        struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
        struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
        enum dpio_channel port = vlv_dport_to_channel(dport);
        enum pipe pipe = crtc->pipe;

        mutex_lock(&dev_priv->sb_lock);
        vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port), 0x00000000);
        vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port), 0x00e00060);
        mutex_unlock(&dev_priv->sb_lock);
}