2 * Copyright © 2006-2016 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
20 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
24 * Eric Anholt <eric@anholt.net>
29 * This information is private to VBT parsing in intel_bios.c.
31 * Please do NOT include anywhere else.
33 #ifndef _INTEL_BIOS_PRIVATE
34 #error "intel_vbt_defs.h is private to intel_bios.c"
37 #ifndef _INTEL_VBT_DEFS_H_
38 #define _INTEL_VBT_DEFS_H_
40 #include "intel_bios.h"
43 * struct vbt_header - VBT Header structure
44 * @signature: VBT signature, always starts with "$VBT"
45 * @version: Version of this structure
46 * @header_size: Size of this structure
47 * @vbt_size: Size of VBT (VBT Header, BDB Header and data blocks)
48 * @vbt_checksum: Checksum
49 * @reserved0: Reserved
50 * @bdb_offset: Offset of &struct bdb_header from beginning of VBT
51 * @aim_offset: Offsets of add-in data blocks from beginning of VBT
65 * struct bdb_header - BDB Header structure
66 * @signature: BDB signature "BIOS_DATA_BLOCK"
67 * @version: Version of the data block definitions
68 * @header_size: Size of this structure
69 * @bdb_size: Size of BDB (BDB Header and data blocks)
78 /* strictly speaking, this is a "skip" block, but it has interesting info */
80 u8 type
; /* 0 == desktop, 1 == mobile */
85 u8 rsvd2
:6; /* finish byte */
92 u8 rsvd4
; /* popup memory size */
94 u8 rsvd5
; /* is crt already on ddc2 */
98 * There are several types of BIOS data blocks (BDBs), each block has
99 * an ID and size in the first 3 bytes (ID in first, size in next 2).
100 * Known types are listed below.
102 #define BDB_GENERAL_FEATURES 1
103 #define BDB_GENERAL_DEFINITIONS 2
104 #define BDB_OLD_TOGGLE_LIST 3
105 #define BDB_MODE_SUPPORT_LIST 4
106 #define BDB_GENERIC_MODE_TABLE 5
107 #define BDB_EXT_MMIO_REGS 6
109 #define BDB_SWF_MMIO 8
111 #define BDB_MODE_REMOVAL_TABLE 10
112 #define BDB_CHILD_DEVICE_TABLE 11
113 #define BDB_DRIVER_FEATURES 12
114 #define BDB_DRIVER_PERSISTENCE 13
115 #define BDB_EXT_TABLE_PTRS 14
116 #define BDB_DOT_CLOCK_OVERRIDE 15
117 #define BDB_DISPLAY_SELECT 16
119 #define BDB_DRIVER_ROTATION 18
120 #define BDB_DISPLAY_REMOVE 19
121 #define BDB_OEM_CUSTOM 20
122 #define BDB_EFP_LIST 21 /* workarounds for VGA hsync/vsync */
123 #define BDB_SDVO_LVDS_OPTIONS 22
124 #define BDB_SDVO_PANEL_DTDS 23
125 #define BDB_SDVO_LVDS_PNP_IDS 24
126 #define BDB_SDVO_LVDS_POWER_SEQ 25
127 #define BDB_TV_OPTIONS 26
129 #define BDB_LVDS_OPTIONS 40
130 #define BDB_LVDS_LFP_DATA_PTRS 41
131 #define BDB_LVDS_LFP_DATA 42
132 #define BDB_LVDS_BACKLIGHT 43
133 #define BDB_LVDS_POWER 44
134 #define BDB_MIPI_CONFIG 52
135 #define BDB_MIPI_SEQUENCE 53
136 #define BDB_SKIP 254 /* VBIOS private block, ignore */
138 struct bdb_general_features
{
147 u8 download_ext_vbt
:1;
150 u8 enable_lfp_on_override
:1;
151 u8 disable_ssc_ddt
:1;
152 u8 underscan_vga_timings
:1;
153 u8 display_clock_mode
:1;
154 u8 vbios_hotplug_support
:1;
157 u8 disable_smooth_vision
:1;
159 u8 rotate_180
:1; /* 181 */
160 u8 fdi_rx_polarity_inverted
:1;
161 u8 vbios_extended_mode
:1; /* 160 */
162 u8 copy_ilfp_dtd_to_sdvo_lvds_dtd
:1; /* 160 */
163 u8 panel_best_fit_timing
:1; /* 160 */
164 u8 ignore_strap_state
:1; /* 160 */
167 u8 legacy_monitor_detect
;
170 u8 int_crt_support
:1;
172 u8 int_efp_support
:1;
173 u8 dp_ssc_enable
:1; /* PCH attached eDP supports SSC */
174 u8 dp_ssc_freq
:1; /* SSC freq for PCH attached eDP */
175 u8 dp_ssc_dongle_supported
:1;
176 u8 rsvd11
:2; /* finish byte */
180 #define GPIO_PIN_DVI_LVDS 0x03 /* "DVI/LVDS DDC GPIO pins" */
181 #define GPIO_PIN_ADD_I2C 0x05 /* "ADDCARD I2C GPIO pins" */
182 #define GPIO_PIN_ADD_DDC 0x04 /* "ADDCARD DDC GPIO pins" */
183 #define GPIO_PIN_ADD_DDC_I2C 0x06 /* "ADDCARD DDC/I2C GPIO pins" */
186 #define DEVICE_TYPE_NONE 0x00
187 #define DEVICE_TYPE_CRT 0x01
188 #define DEVICE_TYPE_TV 0x09
189 #define DEVICE_TYPE_EFP 0x12
190 #define DEVICE_TYPE_LFP 0x22
192 #define DEVICE_TYPE_CRT_DPMS 0x6001
193 #define DEVICE_TYPE_CRT_DPMS_HOTPLUG 0x4001
194 #define DEVICE_TYPE_TV_COMPOSITE 0x0209
195 #define DEVICE_TYPE_TV_MACROVISION 0x0289
196 #define DEVICE_TYPE_TV_RF_COMPOSITE 0x020c
197 #define DEVICE_TYPE_TV_SVIDEO_COMPOSITE 0x0609
198 #define DEVICE_TYPE_TV_SCART 0x0209
199 #define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009
200 #define DEVICE_TYPE_EFP_HOTPLUG_PWR 0x6012
201 #define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR 0x6052
202 #define DEVICE_TYPE_EFP_DVI_I 0x6053
203 #define DEVICE_TYPE_EFP_DVI_D_DUAL 0x6152
204 #define DEVICE_TYPE_EFP_DVI_D_HDCP 0x60d2
205 #define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR 0x6062
206 #define DEVICE_TYPE_OPENLDI_DUALPIX 0x6162
207 #define DEVICE_TYPE_LFP_PANELLINK 0x5012
208 #define DEVICE_TYPE_LFP_CMOS_PWR 0x5042
209 #define DEVICE_TYPE_LFP_LVDS_PWR 0x5062
210 #define DEVICE_TYPE_LFP_LVDS_DUAL 0x5162
211 #define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP 0x51e2
213 /* Add the device class for LFP, TV, HDMI */
214 #define DEVICE_TYPE_INT_LFP 0x1022
215 #define DEVICE_TYPE_INT_TV 0x1009
216 #define DEVICE_TYPE_HDMI 0x60D2
217 #define DEVICE_TYPE_DP 0x68C6
218 #define DEVICE_TYPE_DP_DUAL_MODE 0x60D6
219 #define DEVICE_TYPE_eDP 0x78C6
221 #define DEVICE_TYPE_CLASS_EXTENSION (1 << 15)
222 #define DEVICE_TYPE_POWER_MANAGEMENT (1 << 14)
223 #define DEVICE_TYPE_HOTPLUG_SIGNALING (1 << 13)
224 #define DEVICE_TYPE_INTERNAL_CONNECTOR (1 << 12)
225 #define DEVICE_TYPE_NOT_HDMI_OUTPUT (1 << 11)
226 #define DEVICE_TYPE_MIPI_OUTPUT (1 << 10)
227 #define DEVICE_TYPE_COMPOSITE_OUTPUT (1 << 9)
228 #define DEVICE_TYPE_DUAL_CHANNEL (1 << 8)
229 #define DEVICE_TYPE_HIGH_SPEED_LINK (1 << 6)
230 #define DEVICE_TYPE_LVDS_SIGNALING (1 << 5)
231 #define DEVICE_TYPE_TMDS_DVI_SIGNALING (1 << 4)
232 #define DEVICE_TYPE_VIDEO_SIGNALING (1 << 3)
233 #define DEVICE_TYPE_DISPLAYPORT_OUTPUT (1 << 2)
234 #define DEVICE_TYPE_DIGITAL_OUTPUT (1 << 1)
235 #define DEVICE_TYPE_ANALOG_OUTPUT (1 << 0)
238 * Bits we care about when checking for DEVICE_TYPE_eDP. Depending on the
239 * system, the other bits may or may not be set for eDP outputs.
241 #define DEVICE_TYPE_eDP_BITS \
242 (DEVICE_TYPE_INTERNAL_CONNECTOR | \
243 DEVICE_TYPE_MIPI_OUTPUT | \
244 DEVICE_TYPE_COMPOSITE_OUTPUT | \
245 DEVICE_TYPE_DUAL_CHANNEL | \
246 DEVICE_TYPE_LVDS_SIGNALING | \
247 DEVICE_TYPE_TMDS_DVI_SIGNALING | \
248 DEVICE_TYPE_VIDEO_SIGNALING | \
249 DEVICE_TYPE_DISPLAYPORT_OUTPUT | \
250 DEVICE_TYPE_ANALOG_OUTPUT)
252 #define DEVICE_TYPE_DP_DUAL_MODE_BITS \
253 (DEVICE_TYPE_INTERNAL_CONNECTOR | \
254 DEVICE_TYPE_MIPI_OUTPUT | \
255 DEVICE_TYPE_COMPOSITE_OUTPUT | \
256 DEVICE_TYPE_LVDS_SIGNALING | \
257 DEVICE_TYPE_TMDS_DVI_SIGNALING | \
258 DEVICE_TYPE_VIDEO_SIGNALING | \
259 DEVICE_TYPE_DISPLAYPORT_OUTPUT | \
260 DEVICE_TYPE_DIGITAL_OUTPUT | \
261 DEVICE_TYPE_ANALOG_OUTPUT)
263 #define DEVICE_CFG_NONE 0x00
264 #define DEVICE_CFG_12BIT_DVOB 0x01
265 #define DEVICE_CFG_12BIT_DVOC 0x02
266 #define DEVICE_CFG_24BIT_DVOBC 0x09
267 #define DEVICE_CFG_24BIT_DVOCB 0x0a
268 #define DEVICE_CFG_DUAL_DVOB 0x11
269 #define DEVICE_CFG_DUAL_DVOC 0x12
270 #define DEVICE_CFG_DUAL_DVOBC 0x13
271 #define DEVICE_CFG_DUAL_LINK_DVOBC 0x19
272 #define DEVICE_CFG_DUAL_LINK_DVOCB 0x1a
274 #define DEVICE_WIRE_NONE 0x00
275 #define DEVICE_WIRE_DVOB 0x01
276 #define DEVICE_WIRE_DVOC 0x02
277 #define DEVICE_WIRE_DVOBC 0x03
278 #define DEVICE_WIRE_DVOBB 0x05
279 #define DEVICE_WIRE_DVOCC 0x06
280 #define DEVICE_WIRE_DVOB_MASTER 0x0d
281 #define DEVICE_WIRE_DVOC_MASTER 0x0e
283 /* dvo_port pre BDB 155 */
284 #define DEVICE_PORT_DVOA 0x00 /* none on 845+ */
285 #define DEVICE_PORT_DVOB 0x01
286 #define DEVICE_PORT_DVOC 0x02
288 /* dvo_port BDB 155+ */
289 #define DVO_PORT_HDMIA 0
290 #define DVO_PORT_HDMIB 1
291 #define DVO_PORT_HDMIC 2
292 #define DVO_PORT_HDMID 3
293 #define DVO_PORT_LVDS 4
294 #define DVO_PORT_TV 5
295 #define DVO_PORT_CRT 6
296 #define DVO_PORT_DPB 7
297 #define DVO_PORT_DPC 8
298 #define DVO_PORT_DPD 9
299 #define DVO_PORT_DPA 10
300 #define DVO_PORT_DPE 11 /* 193 */
301 #define DVO_PORT_HDMIE 12 /* 193 */
302 #define DVO_PORT_DPF 13 /* N/A */
303 #define DVO_PORT_HDMIF 14 /* N/A */
304 #define DVO_PORT_MIPIA 21 /* 171 */
305 #define DVO_PORT_MIPIB 22 /* 171 */
306 #define DVO_PORT_MIPIC 23 /* 171 */
307 #define DVO_PORT_MIPID 24 /* 171 */
309 #define HDMI_MAX_DATA_RATE_PLATFORM 0 /* 204 */
310 #define HDMI_MAX_DATA_RATE_297 1 /* 204 */
311 #define HDMI_MAX_DATA_RATE_165 2 /* 204 */
313 #define LEGACY_CHILD_DEVICE_CONFIG_SIZE 33
315 /* DDC Bus DDI Type 155+ */
321 ICL_DDC_BUS_DDI_A
= 0x1,
323 ICL_DDC_BUS_PORT_1
= 0x4,
329 #define VBT_DP_MAX_LINK_RATE_HBR3 0
330 #define VBT_DP_MAX_LINK_RATE_HBR2 1
331 #define VBT_DP_MAX_LINK_RATE_HBR 2
332 #define VBT_DP_MAX_LINK_RATE_LBR 3
335 * The child device config, aka the display device data structure, provides a
336 * description of a port and its configuration on the platform.
338 * The child device config size has been increased, and fields have been added
339 * and their meaning has changed over time. Care must be taken when accessing
340 * basically any of the fields to ensure the correct interpretation for the BDB
341 * version in question.
343 * When we copy the child device configs to dev_priv->vbt.child_dev, we reserve
344 * space for the full structure below, and initialize the tail not actually
345 * present in VBT to zeros. Accessing those fields is fine, as long as the
346 * default zero is taken into account, again according to the BDB version.
348 * BDB versions 155 and below are considered legacy, and version 155 seems to be
349 * a baseline for some of the VBT documentation. When adding new fields, please
350 * include the BDB version when the field was added, if it's above that.
352 struct child_device_config
{
354 u16 device_type
; /* See DEVICE_TYPE_* above */
357 u8 device_id
[10]; /* ascii string */
360 u8 dp_onboard_redriver
; /* 158 */
361 u8 dp_ondock_redriver
; /* 158 */
362 u8 hdmi_level_shifter_value
:5; /* 169 */
363 u8 hdmi_max_data_rate
:3; /* 204 */
364 u16 dtd_buf_ptr
; /* 161 */
365 u8 edidless_efp
:1; /* 161 */
366 u8 compression_enable
:1; /* 198 */
367 u8 compression_method
:1; /* 198 */
368 u8 ganged_edp
:1; /* 202 */
370 u8 compression_structure_index
:4; /* 198 */
372 u8 slave_port
; /* 202 */
378 u8 dvo_port
; /* See DEVICE_PORT_* and DVO_PORT_* above */
383 u8 dvo_cfg
; /* See DEVICE_CFG_* above */
393 u8 efp_routed
:1; /* 158 */
394 u8 lane_reversal
:1; /* 184 */
395 u8 lspcon
:1; /* 192 */
396 u8 iboost
:1; /* 196 */
397 u8 hpd_invert
:1; /* 196 */
399 u8 hdmi_support
:1; /* 158 */
400 u8 dp_support
:1; /* 158 */
401 u8 tmds_support
:1; /* 158 */
402 u8 support_reserved
:5;
409 u8 sdvo_stall
:1; /* 158 */
411 u8 integrated_encoder
:1;
412 u8 capabilities_reserved
:2;
413 u8 dvo_wiring
; /* See DEVICE_WIRE_* above */
417 u8 mipi_bridge_type
; /* 171 */
422 u8 dp_usb_type_c
:1; /* 195 */
424 u8 flags2_reserved
:2; /* 195 */
425 u8 dp_port_trace_length
:4; /* 209 */
426 u8 dp_gpio_index
; /* 195 */
427 u16 dp_gpio_pin_num
; /* 195 */
428 u8 dp_iboost_level
:4; /* 196 */
429 u8 hdmi_iboost_level
:4; /* 196 */
430 u8 dp_max_link_rate
:2; /* 216 CNL+ */
431 u8 dp_max_link_rate_reserved
:6; /* 216 */
434 struct bdb_general_definitions
{
436 u8 crt_ddc_gmbus_pin
;
440 u8 skip_boot_crt_detect
:1;
442 u8 rsvd1
:5; /* finish byte */
444 /* boot device bits */
450 * If TV is present, it'll be at devices[0].
451 * LVDS will be next, either devices[0] or [1], if present.
452 * On some platforms the number of device is 6. But could be as few as
453 * 4 if both TV and LVDS are missing.
454 * And the device num is related with the size of general definition
455 * block. It is obtained by using the following formula:
456 * number = (block_size - sizeof(bdb_general_definitions))/
457 * defs->child_dev_size;
462 /* Mask for DRRS / Panel Channel / SSC / BLT control bits extraction */
463 #define MODE_MASK 0x3
465 struct bdb_lvds_options
{
468 /* LVDS capabilities, stored in a dword */
470 u8 pfit_text_mode_enhanced
:1;
471 u8 pfit_gfx_mode_enhanced
:1;
472 u8 pfit_ratio_auto
:1;
477 /* LVDS Panel channel bits stored here */
478 u32 lvds_panel_channel_bits
;
479 /* LVDS SSC (Spread Spectrum Clock) bits stored here. */
483 /* Panel color depth defined here */
484 u16 panel_color_depth
;
485 /* LVDS panel type bits stored here */
486 u32 dps_panel_type_bits
;
487 /* LVDS backlight control type bits stored here */
488 u32 blt_control_type_bits
;
491 /* LFP pointer table contains entries to the struct below */
492 struct bdb_lvds_lfp_data_ptr
{
493 u16 fp_timing_offset
; /* offsets are from start of bdb */
495 u16 dvo_timing_offset
;
497 u16 panel_pnp_id_offset
;
501 struct bdb_lvds_lfp_data_ptrs
{
502 u8 lvds_entries
; /* followed by one or more lvds_data_ptr structs */
503 struct bdb_lvds_lfp_data_ptr ptr
[16];
506 /* LFP data has 3 blocks per entry */
507 struct lvds_fp_timing
{
517 u32 pp_cycle_reg_val
;
523 struct lvds_dvo_timing
{
524 u16 clock
; /**< In 10khz */
534 u8 hsync_pulse_width_lo
;
535 u8 vsync_pulse_width_lo
:4;
537 u8 vsync_pulse_width_hi
:2;
539 u8 hsync_pulse_width_hi
:2;
562 struct bdb_lvds_lfp_data_entry
{
563 struct lvds_fp_timing fp_timing
;
564 struct lvds_dvo_timing dvo_timing
;
565 struct lvds_pnp_id pnp_id
;
568 struct bdb_lvds_lfp_data
{
569 struct bdb_lvds_lfp_data_entry data
[16];
572 #define BDB_BACKLIGHT_TYPE_NONE 0
573 #define BDB_BACKLIGHT_TYPE_PWM 2
575 struct bdb_lfp_backlight_data_entry
{
585 struct bdb_lfp_backlight_control_method
{
590 struct bdb_lfp_backlight_data
{
592 struct bdb_lfp_backlight_data_entry data
[16];
594 struct bdb_lfp_backlight_control_method backlight_control
[16];
597 struct aimdb_header
{
601 u16 aimdb_header_size
;
610 struct vch_panel_data
{
611 u16 fp_timing_offset
;
613 u16 dvo_timing_offset
;
615 u16 text_fitting_offset
;
616 u8 text_fitting_size
;
617 u16 graphics_fitting_offset
;
618 u8 graphics_fitting_size
;
622 struct aimdb_block aimdb_block
;
623 struct vch_panel_data panels
[16];
626 struct bdb_sdvo_lvds_options
{
628 u8 h40_set_panel_type
;
633 u8 sclalarcoeff_tab_row_num
;
634 u8 sclalarcoeff_tab_row_size
;
636 u8 panel_misc_bits_1
;
637 u8 panel_misc_bits_2
;
638 u8 panel_misc_bits_3
;
639 u8 panel_misc_bits_4
;
643 #define BDB_DRIVER_FEATURE_NO_LVDS 0
644 #define BDB_DRIVER_FEATURE_INT_LVDS 1
645 #define BDB_DRIVER_FEATURE_SDVO_LVDS 2
646 #define BDB_DRIVER_FEATURE_INT_SDVO_LVDS 3
648 struct bdb_driver_features
{
649 u8 boot_dev_algorithm
:1;
650 u8 block_display_switch
:1;
651 u8 allow_display_switch
:1;
655 u8 sprite_in_clone
:1;
661 u8 boot_mode_refresh
;
663 u16 enable_lfp_primary
:1;
664 u16 selective_mode_pruning
:1;
665 u16 dual_frequency
:1;
666 u16 render_clock_freq
:1; /* 0: high freq; 1: low freq */
667 u16 nt_clone_support
:1;
668 u16 power_scheme_ui
:1; /* 0: CUI; 1: 3rd party */
669 u16 sprite_display_assign
:1; /* 0: secondary; 1: primary */
670 u16 cui_aspect_scaling
:1;
671 u16 preserve_aspect_ratio
:1;
672 u16 sdvo_device_power_down
:1;
680 u16 legacy_crt_max_x
;
681 u16 legacy_crt_max_y
;
682 u8 legacy_crt_max_refresh
;
685 u8 custom_vbt_version
;
686 /* Driver features data block */
690 u16 bltclt_enabled
:1;
699 u16 pc_feature_valid
:1;
705 #define EDP_RATE_1_62 0
706 #define EDP_RATE_2_7 1
710 #define EDP_PREEMPHASIS_NONE 0
711 #define EDP_PREEMPHASIS_3_5dB 1
712 #define EDP_PREEMPHASIS_6dB 2
713 #define EDP_PREEMPHASIS_9_5dB 3
714 #define EDP_VSWING_0_4V 0
715 #define EDP_VSWING_0_6V 1
716 #define EDP_VSWING_0_8V 2
717 #define EDP_VSWING_1_2V 3
720 struct edp_fast_link_params
{
727 struct edp_pwm_delays
{
728 u16 pwm_on_to_backlight_enable
;
729 u16 backlight_disable_to_pwm_off
;
732 struct edp_full_link_params
{
738 struct edp_power_seq power_seqs
[16];
740 struct edp_fast_link_params fast_link_params
[16];
741 u32 sdrrs_msa_timing_delay
;
743 /* ith bit indicates enabled/disabled for (i+1)th panel */
744 u16 edp_s3d_feature
; /* 162 */
745 u16 edp_t3_optimization
; /* 165 */
746 u64 edp_vswing_preemph
; /* 173 */
747 u16 fast_link_training
; /* 182 */
748 u16 dpcd_600h_write_required
; /* 185 */
749 struct edp_pwm_delays pwm_delays
[16]; /* 186 */
750 u16 full_link_params_provided
; /* 199 */
751 struct edp_full_link_params full_link_params
[16]; /* 199 */
757 u8 require_aux_to_wakeup
:1;
758 u8 feature_bits_rsvd
:6;
763 u8 wait_times_rsvd
:1;
765 /* TP wake up time in multiple of 100 */
767 u16 tp2_tp3_wakeup_time
;
771 struct psr_table psr_table
[16];
775 * Driver<->VBIOS interaction occurs through scratch bits in
779 /* GR18 bits are set on display switch and hotkey events */
780 #define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */
781 #define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */
782 #define GR18_HK_NONE (0x0<<3)
783 #define GR18_HK_LFP_STRETCH (0x1<<3)
784 #define GR18_HK_TOGGLE_DISP (0x2<<3)
785 #define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */
786 #define GR18_HK_POPUP_DISABLED (0x6<<3)
787 #define GR18_HK_POPUP_ENABLED (0x7<<3)
788 #define GR18_HK_PFIT (0x8<<3)
789 #define GR18_HK_APM_CHANGE (0xa<<3)
790 #define GR18_HK_MULTIPLE (0xc<<3)
791 #define GR18_USER_INT_EN (1<<2)
792 #define GR18_A0000_FLUSH_EN (1<<1)
793 #define GR18_SMM_EN (1<<0)
795 /* Set by driver, cleared by VBIOS */
796 #define SWF00_YRES_SHIFT 16
797 #define SWF00_XRES_SHIFT 0
798 #define SWF00_RES_MASK 0xffff
800 /* Set by VBIOS at boot time and driver at runtime */
801 #define SWF01_TV2_FORMAT_SHIFT 8
802 #define SWF01_TV1_FORMAT_SHIFT 0
803 #define SWF01_TV_FORMAT_MASK 0xffff
805 #define SWF10_VBIOS_BLC_I2C_EN (1<<29)
806 #define SWF10_GTT_OVERRIDE_EN (1<<28)
807 #define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */
808 #define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24)
809 #define SWF10_OLD_TOGGLE 0x0
810 #define SWF10_TOGGLE_LIST_1 0x1
811 #define SWF10_TOGGLE_LIST_2 0x2
812 #define SWF10_TOGGLE_LIST_3 0x3
813 #define SWF10_TOGGLE_LIST_4 0x4
814 #define SWF10_PANNING_EN (1<<23)
815 #define SWF10_DRIVER_LOADED (1<<22)
816 #define SWF10_EXTENDED_DESKTOP (1<<21)
817 #define SWF10_EXCLUSIVE_MODE (1<<20)
818 #define SWF10_OVERLAY_EN (1<<19)
819 #define SWF10_PLANEB_HOLDOFF (1<<18)
820 #define SWF10_PLANEA_HOLDOFF (1<<17)
821 #define SWF10_VGA_HOLDOFF (1<<16)
822 #define SWF10_ACTIVE_DISP_MASK 0xffff
823 #define SWF10_PIPEB_LFP2 (1<<15)
824 #define SWF10_PIPEB_EFP2 (1<<14)
825 #define SWF10_PIPEB_TV2 (1<<13)
826 #define SWF10_PIPEB_CRT2 (1<<12)
827 #define SWF10_PIPEB_LFP (1<<11)
828 #define SWF10_PIPEB_EFP (1<<10)
829 #define SWF10_PIPEB_TV (1<<9)
830 #define SWF10_PIPEB_CRT (1<<8)
831 #define SWF10_PIPEA_LFP2 (1<<7)
832 #define SWF10_PIPEA_EFP2 (1<<6)
833 #define SWF10_PIPEA_TV2 (1<<5)
834 #define SWF10_PIPEA_CRT2 (1<<4)
835 #define SWF10_PIPEA_LFP (1<<3)
836 #define SWF10_PIPEA_EFP (1<<2)
837 #define SWF10_PIPEA_TV (1<<1)
838 #define SWF10_PIPEA_CRT (1<<0)
840 #define SWF11_MEMORY_SIZE_SHIFT 16
841 #define SWF11_SV_TEST_EN (1<<15)
842 #define SWF11_IS_AGP (1<<14)
843 #define SWF11_DISPLAY_HOLDOFF (1<<13)
844 #define SWF11_DPMS_REDUCED (1<<12)
845 #define SWF11_IS_VBE_MODE (1<<11)
846 #define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */
847 #define SWF11_DPMS_MASK 0x07
848 #define SWF11_DPMS_OFF (1<<2)
849 #define SWF11_DPMS_SUSPEND (1<<1)
850 #define SWF11_DPMS_STANDBY (1<<0)
851 #define SWF11_DPMS_ON 0
853 #define SWF14_GFX_PFIT_EN (1<<31)
854 #define SWF14_TEXT_PFIT_EN (1<<30)
855 #define SWF14_LID_STATUS_CLOSED (1<<29) /* 0 here means open */
856 #define SWF14_POPUP_EN (1<<28)
857 #define SWF14_DISPLAY_HOLDOFF (1<<27)
858 #define SWF14_DISP_DETECT_EN (1<<26)
859 #define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */
860 #define SWF14_DRIVER_STATUS (1<<24)
861 #define SWF14_OS_TYPE_WIN9X (1<<23)
862 #define SWF14_OS_TYPE_WINNT (1<<22)
864 #define SWF14_PM_TYPE_MASK 0x00070000
865 #define SWF14_PM_ACPI_VIDEO (0x4 << 16)
866 #define SWF14_PM_ACPI (0x3 << 16)
867 #define SWF14_PM_APM_12 (0x2 << 16)
868 #define SWF14_PM_APM_11 (0x1 << 16)
869 #define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */
870 /* if GR18 indicates a display switch */
871 #define SWF14_DS_PIPEB_LFP2_EN (1<<15)
872 #define SWF14_DS_PIPEB_EFP2_EN (1<<14)
873 #define SWF14_DS_PIPEB_TV2_EN (1<<13)
874 #define SWF14_DS_PIPEB_CRT2_EN (1<<12)
875 #define SWF14_DS_PIPEB_LFP_EN (1<<11)
876 #define SWF14_DS_PIPEB_EFP_EN (1<<10)
877 #define SWF14_DS_PIPEB_TV_EN (1<<9)
878 #define SWF14_DS_PIPEB_CRT_EN (1<<8)
879 #define SWF14_DS_PIPEA_LFP2_EN (1<<7)
880 #define SWF14_DS_PIPEA_EFP2_EN (1<<6)
881 #define SWF14_DS_PIPEA_TV2_EN (1<<5)
882 #define SWF14_DS_PIPEA_CRT2_EN (1<<4)
883 #define SWF14_DS_PIPEA_LFP_EN (1<<3)
884 #define SWF14_DS_PIPEA_EFP_EN (1<<2)
885 #define SWF14_DS_PIPEA_TV_EN (1<<1)
886 #define SWF14_DS_PIPEA_CRT_EN (1<<0)
887 /* if GR18 indicates a panel fitting request */
888 #define SWF14_PFIT_EN (1<<0) /* 0 means disable */
889 /* if GR18 indicates an APM change request */
890 #define SWF14_APM_HIBERNATE 0x4
891 #define SWF14_APM_SUSPEND 0x3
892 #define SWF14_APM_STANDBY 0x1
893 #define SWF14_APM_RESTORE 0x0
895 /* Block 52 contains MIPI configuration block
896 * 6 * bdb_mipi_config, followed by 6 pps data block
899 #define MAX_MIPI_CONFIGURATIONS 6
901 struct bdb_mipi_config
{
902 struct mipi_config config
[MAX_MIPI_CONFIGURATIONS
];
903 struct mipi_pps_data pps
[MAX_MIPI_CONFIGURATIONS
];
906 /* Block 53 contains MIPI sequences as needed by the panel
907 * for enabling it. This block can be variable in size and
908 * can be maximum of 6 blocks
910 struct bdb_mipi_sequence
{
915 enum mipi_gpio_pin_index
{
916 MIPI_GPIO_UNDEFINED
= 0,
917 MIPI_GPIO_PANEL_ENABLE
,
919 MIPI_GPIO_PWM_ENABLE
,
921 MIPI_GPIO_PWR_DOWN_R
,
922 MIPI_GPIO_STDBY_RST_N
,
926 #endif /* _INTEL_VBT_DEFS_H_ */