fuse: flush requests on umount
[linux/fpc-iii.git] / drivers / scsi / sun3_scsi.h
blobe96a37cf06ac117f45246e4f60e6745384a0a119
1 /*
2 * Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
4 * Sun3 DMA additions by Sam Creasey (sammy@sammy.net)
6 * Adapted from mac_scsinew.h:
7 */
8 /*
9 * Cumana Generic NCR5380 driver defines
11 * Copyright 1993, Drew Eckhardt
12 * Visionary Computing
13 * (Unix and Linux consulting and custom programming)
14 * drew@colorado.edu
15 * +1 (303) 440-4894
17 * ALPHA RELEASE 1.
19 * For more information, please consult
21 * NCR 5380 Family
22 * SCSI Protocol Controller
23 * Databook
25 * NCR Microelectronics
26 * 1635 Aeroplaza Drive
27 * Colorado Springs, CO 80916
28 * 1+ (719) 578-3400
29 * 1+ (800) 334-5454
32 #ifndef SUN3_SCSI_H
33 #define SUN3_SCSI_H
35 #define SUN3SCSI_PUBLIC_RELEASE 1
38 * Int: level 2 autovector
39 * IO: type 1, base 0x00140000, 5 bits phys space: A<4..0>
41 #define IRQ_SUN3_SCSI 2
42 #define IOBASE_SUN3_SCSI 0x00140000
44 #define IOBASE_SUN3_VMESCSI 0xff200000
46 static int sun3scsi_abort(struct scsi_cmnd *);
47 static int sun3scsi_detect (struct scsi_host_template *);
48 static const char *sun3scsi_info (struct Scsi_Host *);
49 static int sun3scsi_bus_reset(struct scsi_cmnd *);
50 static int sun3scsi_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
51 static int sun3scsi_release (struct Scsi_Host *);
53 #ifndef CMD_PER_LUN
54 #define CMD_PER_LUN 2
55 #endif
57 #ifndef CAN_QUEUE
58 #define CAN_QUEUE 16
59 #endif
61 #ifndef SG_TABLESIZE
62 #define SG_TABLESIZE SG_NONE
63 #endif
65 #ifndef MAX_TAGS
66 #define MAX_TAGS 32
67 #endif
69 #ifndef USE_TAGGED_QUEUING
70 #define USE_TAGGED_QUEUING 1
71 #endif
73 #include <scsi/scsicam.h>
75 #ifdef SUN3_SCSI_VME
76 #define SUN3_SCSI_NAME "Sun3 NCR5380 VME SCSI"
77 #else
78 #define SUN3_SCSI_NAME "Sun3 NCR5380 SCSI"
79 #endif
81 #define NCR5380_implementation_fields \
82 int port, ctrl
84 #define NCR5380_local_declare() \
85 struct Scsi_Host *_instance
87 #define NCR5380_setup(instance) \
88 _instance = instance
90 #define NCR5380_read(reg) sun3scsi_read(reg)
91 #define NCR5380_write(reg, value) sun3scsi_write(reg, value)
93 #define NCR5380_intr sun3scsi_intr
94 #define NCR5380_queue_command sun3scsi_queue_command
95 #define NCR5380_bus_reset sun3scsi_bus_reset
96 #define NCR5380_abort sun3scsi_abort
97 #define NCR5380_show_info sun3scsi_show_info
98 #define NCR5380_dma_xfer_len(i, cmd, phase) \
99 sun3scsi_dma_xfer_len(cmd->SCp.this_residual,cmd,((phase) & SR_IO) ? 0 : 1)
101 #define NCR5380_dma_write_setup(instance, data, count) sun3scsi_dma_setup(data, count, 1)
102 #define NCR5380_dma_read_setup(instance, data, count) sun3scsi_dma_setup(data, count, 0)
103 #define NCR5380_dma_residual sun3scsi_dma_residual
105 /* additional registers - mainly DMA control regs */
106 /* these start at regbase + 8 -- directly after the NCR regs */
107 struct sun3_dma_regs {
108 unsigned short dma_addr_hi; /* vme only */
109 unsigned short dma_addr_lo; /* vme only */
110 unsigned short dma_count_hi; /* vme only */
111 unsigned short dma_count_lo; /* vme only */
112 unsigned short udc_data; /* udc dma data reg (obio only) */
113 unsigned short udc_addr; /* uda dma addr reg (obio only) */
114 unsigned short fifo_data; /* fifo data reg, holds extra byte on
115 odd dma reads */
116 unsigned short fifo_count;
117 unsigned short csr; /* control/status reg */
118 unsigned short bpack_hi; /* vme only */
119 unsigned short bpack_lo; /* vme only */
120 unsigned short ivect; /* vme only */
121 unsigned short fifo_count_hi; /* vme only */
124 /* ucd chip specific regs - live in dvma space */
125 struct sun3_udc_regs {
126 unsigned short rsel; /* select regs to load */
127 unsigned short addr_hi; /* high word of addr */
128 unsigned short addr_lo; /* low word */
129 unsigned short count; /* words to be xfer'd */
130 unsigned short mode_hi; /* high word of channel mode */
131 unsigned short mode_lo; /* low word of channel mode */
134 /* addresses of the udc registers */
135 #define UDC_MODE 0x38
136 #define UDC_CSR 0x2e /* command/status */
137 #define UDC_CHN_HI 0x26 /* chain high word */
138 #define UDC_CHN_LO 0x22 /* chain lo word */
139 #define UDC_CURA_HI 0x1a /* cur reg A high */
140 #define UDC_CURA_LO 0x0a /* cur reg A low */
141 #define UDC_CURB_HI 0x12 /* cur reg B high */
142 #define UDC_CURB_LO 0x02 /* cur reg B low */
143 #define UDC_MODE_HI 0x56 /* mode reg high */
144 #define UDC_MODE_LO 0x52 /* mode reg low */
145 #define UDC_COUNT 0x32 /* words to xfer */
147 /* some udc commands */
148 #define UDC_RESET 0
149 #define UDC_CHN_START 0xa0 /* start chain */
150 #define UDC_INT_ENABLE 0x32 /* channel 1 int on */
152 /* udc mode words */
153 #define UDC_MODE_HIWORD 0x40
154 #define UDC_MODE_LSEND 0xc2
155 #define UDC_MODE_LRECV 0xd2
157 /* udc reg selections */
158 #define UDC_RSEL_SEND 0x282
159 #define UDC_RSEL_RECV 0x182
161 /* bits in csr reg */
162 #define CSR_DMA_ACTIVE 0x8000
163 #define CSR_DMA_CONFLICT 0x4000
164 #define CSR_DMA_BUSERR 0x2000
166 #define CSR_FIFO_EMPTY 0x400 /* fifo flushed? */
167 #define CSR_SDB_INT 0x200 /* sbc interrupt pending */
168 #define CSR_DMA_INT 0x100 /* dma interrupt pending */
170 #define CSR_LEFT 0xc0
171 #define CSR_LEFT_3 0xc0
172 #define CSR_LEFT_2 0x80
173 #define CSR_LEFT_1 0x40
174 #define CSR_PACK_ENABLE 0x20
176 #define CSR_DMA_ENABLE 0x10
178 #define CSR_SEND 0x8 /* 1 = send 0 = recv */
179 #define CSR_FIFO 0x2 /* reset fifo */
180 #define CSR_INTR 0x4 /* interrupt enable */
181 #define CSR_SCSI 0x1
183 #define VME_DATA24 0x3d00
185 #endif /* SUN3_SCSI_H */