udl-kms: avoid prefetch
[linux/fpc-iii.git] / drivers / net / ethernet / smsc / smsc911x.h
blob8d75508acd2bfad7c7915b955f40168591d47385
1 /***************************************************************************
3 * Copyright (C) 2004-2008 SMSC
4 * Copyright (C) 2005-2008 ARM
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version 2
9 * of the License, or (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
19 ***************************************************************************/
20 #ifndef __SMSC911X_H__
21 #define __SMSC911X_H__
23 /*Chip ID*/
24 #define LAN9115 0x01150000
25 #define LAN9116 0x01160000
26 #define LAN9117 0x01170000
27 #define LAN9118 0x01180000
28 #define LAN9215 0x115A0000
29 #define LAN9216 0x116A0000
30 #define LAN9217 0x117A0000
31 #define LAN9218 0x118A0000
32 #define LAN9210 0x92100000
33 #define LAN9211 0x92110000
34 #define LAN9220 0x92200000
35 #define LAN9221 0x92210000
36 #define LAN9250 0x92500000
37 #define LAN89218 0x218A0000
39 #define TX_FIFO_LOW_THRESHOLD ((u32)1600)
40 #define SMSC911X_EEPROM_SIZE ((u32)128)
41 #define USE_DEBUG 0
43 /* This is the maximum number of packets to be received every
44 * NAPI poll */
45 #define SMSC_NAPI_WEIGHT 16
47 /* implements a PHY loopback test at initialisation time, to ensure a packet
48 * can be successfully looped back */
49 #define USE_PHY_WORK_AROUND
51 #if USE_DEBUG >= 1
52 #define SMSC_WARN(pdata, nlevel, fmt, args...) \
53 netif_warn(pdata, nlevel, (pdata)->dev, \
54 "%s: " fmt "\n", __func__, ##args)
55 #else
56 #define SMSC_WARN(pdata, nlevel, fmt, args...) \
57 no_printk(fmt "\n", ##args)
58 #endif
60 #if USE_DEBUG >= 2
61 #define SMSC_TRACE(pdata, nlevel, fmt, args...) \
62 netif_info(pdata, nlevel, pdata->dev, fmt "\n", ##args)
63 #else
64 #define SMSC_TRACE(pdata, nlevel, fmt, args...) \
65 no_printk(fmt "\n", ##args)
66 #endif
68 #ifdef CONFIG_DEBUG_SPINLOCK
69 #define SMSC_ASSERT_MAC_LOCK(pdata) \
70 WARN_ON_SMP(!spin_is_locked(&pdata->mac_lock))
71 #else
72 #define SMSC_ASSERT_MAC_LOCK(pdata) do {} while (0)
73 #endif /* CONFIG_DEBUG_SPINLOCK */
75 /* SMSC911x registers and bitfields */
76 #define RX_DATA_FIFO 0x00
78 #define TX_DATA_FIFO 0x20
79 #define TX_CMD_A_ON_COMP_ 0x80000000
80 #define TX_CMD_A_BUF_END_ALGN_ 0x03000000
81 #define TX_CMD_A_4_BYTE_ALGN_ 0x00000000
82 #define TX_CMD_A_16_BYTE_ALGN_ 0x01000000
83 #define TX_CMD_A_32_BYTE_ALGN_ 0x02000000
84 #define TX_CMD_A_DATA_OFFSET_ 0x001F0000
85 #define TX_CMD_A_FIRST_SEG_ 0x00002000
86 #define TX_CMD_A_LAST_SEG_ 0x00001000
87 #define TX_CMD_A_BUF_SIZE_ 0x000007FF
88 #define TX_CMD_B_PKT_TAG_ 0xFFFF0000
89 #define TX_CMD_B_ADD_CRC_DISABLE_ 0x00002000
90 #define TX_CMD_B_DISABLE_PADDING_ 0x00001000
91 #define TX_CMD_B_PKT_BYTE_LENGTH_ 0x000007FF
93 #define RX_STATUS_FIFO 0x40
94 #define RX_STS_ES_ 0x00008000
95 #define RX_STS_LENGTH_ERR_ 0x00001000
96 #define RX_STS_MCAST_ 0x00000400
97 #define RX_STS_FRAME_TYPE_ 0x00000020
98 #define RX_STS_CRC_ERR_ 0x00000002
100 #define RX_STATUS_FIFO_PEEK 0x44
102 #define TX_STATUS_FIFO 0x48
103 #define TX_STS_ES_ 0x00008000
104 #define TX_STS_LOST_CARRIER_ 0x00000800
105 #define TX_STS_NO_CARRIER_ 0x00000400
106 #define TX_STS_LATE_COL_ 0x00000200
107 #define TX_STS_EXCESS_COL_ 0x00000100
109 #define TX_STATUS_FIFO_PEEK 0x4C
111 #define ID_REV 0x50
112 #define ID_REV_CHIP_ID_ 0xFFFF0000
113 #define ID_REV_REV_ID_ 0x0000FFFF
115 #define INT_CFG 0x54
116 #define INT_CFG_INT_DEAS_ 0xFF000000
117 #define INT_CFG_INT_DEAS_CLR_ 0x00004000
118 #define INT_CFG_INT_DEAS_STS_ 0x00002000
119 #define INT_CFG_IRQ_INT_ 0x00001000
120 #define INT_CFG_IRQ_EN_ 0x00000100
121 #define INT_CFG_IRQ_POL_ 0x00000010
122 #define INT_CFG_IRQ_TYPE_ 0x00000001
124 #define INT_STS 0x58
125 #define INT_STS_SW_INT_ 0x80000000
126 #define INT_STS_TXSTOP_INT_ 0x02000000
127 #define INT_STS_RXSTOP_INT_ 0x01000000
128 #define INT_STS_RXDFH_INT_ 0x00800000
129 #define INT_STS_RXDF_INT_ 0x00400000
130 #define INT_STS_TX_IOC_ 0x00200000
131 #define INT_STS_RXD_INT_ 0x00100000
132 #define INT_STS_GPT_INT_ 0x00080000
133 #define INT_STS_PHY_INT_ 0x00040000
134 #define INT_STS_PME_INT_ 0x00020000
135 #define INT_STS_TXSO_ 0x00010000
136 #define INT_STS_RWT_ 0x00008000
137 #define INT_STS_RXE_ 0x00004000
138 #define INT_STS_TXE_ 0x00002000
139 #define INT_STS_TDFU_ 0x00000800
140 #define INT_STS_TDFO_ 0x00000400
141 #define INT_STS_TDFA_ 0x00000200
142 #define INT_STS_TSFF_ 0x00000100
143 #define INT_STS_TSFL_ 0x00000080
144 #define INT_STS_RXDF_ 0x00000040
145 #define INT_STS_RDFL_ 0x00000020
146 #define INT_STS_RSFF_ 0x00000010
147 #define INT_STS_RSFL_ 0x00000008
148 #define INT_STS_GPIO2_INT_ 0x00000004
149 #define INT_STS_GPIO1_INT_ 0x00000002
150 #define INT_STS_GPIO0_INT_ 0x00000001
152 #define INT_EN 0x5C
153 #define INT_EN_SW_INT_EN_ 0x80000000
154 #define INT_EN_TXSTOP_INT_EN_ 0x02000000
155 #define INT_EN_RXSTOP_INT_EN_ 0x01000000
156 #define INT_EN_RXDFH_INT_EN_ 0x00800000
157 #define INT_EN_TIOC_INT_EN_ 0x00200000
158 #define INT_EN_RXD_INT_EN_ 0x00100000
159 #define INT_EN_GPT_INT_EN_ 0x00080000
160 #define INT_EN_PHY_INT_EN_ 0x00040000
161 #define INT_EN_PME_INT_EN_ 0x00020000
162 #define INT_EN_TXSO_EN_ 0x00010000
163 #define INT_EN_RWT_EN_ 0x00008000
164 #define INT_EN_RXE_EN_ 0x00004000
165 #define INT_EN_TXE_EN_ 0x00002000
166 #define INT_EN_TDFU_EN_ 0x00000800
167 #define INT_EN_TDFO_EN_ 0x00000400
168 #define INT_EN_TDFA_EN_ 0x00000200
169 #define INT_EN_TSFF_EN_ 0x00000100
170 #define INT_EN_TSFL_EN_ 0x00000080
171 #define INT_EN_RXDF_EN_ 0x00000040
172 #define INT_EN_RDFL_EN_ 0x00000020
173 #define INT_EN_RSFF_EN_ 0x00000010
174 #define INT_EN_RSFL_EN_ 0x00000008
175 #define INT_EN_GPIO2_INT_ 0x00000004
176 #define INT_EN_GPIO1_INT_ 0x00000002
177 #define INT_EN_GPIO0_INT_ 0x00000001
179 #define BYTE_TEST 0x64
181 #define FIFO_INT 0x68
182 #define FIFO_INT_TX_AVAIL_LEVEL_ 0xFF000000
183 #define FIFO_INT_TX_STS_LEVEL_ 0x00FF0000
184 #define FIFO_INT_RX_AVAIL_LEVEL_ 0x0000FF00
185 #define FIFO_INT_RX_STS_LEVEL_ 0x000000FF
187 #define RX_CFG 0x6C
188 #define RX_CFG_RX_END_ALGN_ 0xC0000000
189 #define RX_CFG_RX_END_ALGN4_ 0x00000000
190 #define RX_CFG_RX_END_ALGN16_ 0x40000000
191 #define RX_CFG_RX_END_ALGN32_ 0x80000000
192 #define RX_CFG_RX_DMA_CNT_ 0x0FFF0000
193 #define RX_CFG_RX_DUMP_ 0x00008000
194 #define RX_CFG_RXDOFF_ 0x00001F00
196 #define TX_CFG 0x70
197 #define TX_CFG_TXS_DUMP_ 0x00008000
198 #define TX_CFG_TXD_DUMP_ 0x00004000
199 #define TX_CFG_TXSAO_ 0x00000004
200 #define TX_CFG_TX_ON_ 0x00000002
201 #define TX_CFG_STOP_TX_ 0x00000001
203 #define HW_CFG 0x74
204 #define HW_CFG_TTM_ 0x00200000
205 #define HW_CFG_SF_ 0x00100000
206 #define HW_CFG_TX_FIF_SZ_ 0x000F0000
207 #define HW_CFG_TR_ 0x00003000
208 #define HW_CFG_SRST_ 0x00000001
210 /* only available on 115/117 */
211 #define HW_CFG_PHY_CLK_SEL_ 0x00000060
212 #define HW_CFG_PHY_CLK_SEL_INT_PHY_ 0x00000000
213 #define HW_CFG_PHY_CLK_SEL_EXT_PHY_ 0x00000020
214 #define HW_CFG_PHY_CLK_SEL_CLK_DIS_ 0x00000040
215 #define HW_CFG_SMI_SEL_ 0x00000010
216 #define HW_CFG_EXT_PHY_DET_ 0x00000008
217 #define HW_CFG_EXT_PHY_EN_ 0x00000004
218 #define HW_CFG_SRST_TO_ 0x00000002
220 /* only available on 116/118 */
221 #define HW_CFG_32_16_BIT_MODE_ 0x00000004
223 #define RX_DP_CTRL 0x78
224 #define RX_DP_CTRL_RX_FFWD_ 0x80000000
226 #define RX_FIFO_INF 0x7C
227 #define RX_FIFO_INF_RXSUSED_ 0x00FF0000
228 #define RX_FIFO_INF_RXDUSED_ 0x0000FFFF
230 #define TX_FIFO_INF 0x80
231 #define TX_FIFO_INF_TSUSED_ 0x00FF0000
232 #define TX_FIFO_INF_TDFREE_ 0x0000FFFF
234 #define PMT_CTRL 0x84
235 #define PMT_CTRL_PM_MODE_ 0x00003000
236 #define PMT_CTRL_PM_MODE_D0_ 0x00000000
237 #define PMT_CTRL_PM_MODE_D1_ 0x00001000
238 #define PMT_CTRL_PM_MODE_D2_ 0x00002000
239 #define PMT_CTRL_PM_MODE_D3_ 0x00003000
240 #define PMT_CTRL_PHY_RST_ 0x00000400
241 #define PMT_CTRL_WOL_EN_ 0x00000200
242 #define PMT_CTRL_ED_EN_ 0x00000100
243 #define PMT_CTRL_PME_TYPE_ 0x00000040
244 #define PMT_CTRL_WUPS_ 0x00000030
245 #define PMT_CTRL_WUPS_NOWAKE_ 0x00000000
246 #define PMT_CTRL_WUPS_ED_ 0x00000010
247 #define PMT_CTRL_WUPS_WOL_ 0x00000020
248 #define PMT_CTRL_WUPS_MULTI_ 0x00000030
249 #define PMT_CTRL_PME_IND_ 0x00000008
250 #define PMT_CTRL_PME_POL_ 0x00000004
251 #define PMT_CTRL_PME_EN_ 0x00000002
252 #define PMT_CTRL_READY_ 0x00000001
254 #define GPIO_CFG 0x88
255 #define GPIO_CFG_LED3_EN_ 0x40000000
256 #define GPIO_CFG_LED2_EN_ 0x20000000
257 #define GPIO_CFG_LED1_EN_ 0x10000000
258 #define GPIO_CFG_GPIO2_INT_POL_ 0x04000000
259 #define GPIO_CFG_GPIO1_INT_POL_ 0x02000000
260 #define GPIO_CFG_GPIO0_INT_POL_ 0x01000000
261 #define GPIO_CFG_EEPR_EN_ 0x00700000
262 #define GPIO_CFG_GPIOBUF2_ 0x00040000
263 #define GPIO_CFG_GPIOBUF1_ 0x00020000
264 #define GPIO_CFG_GPIOBUF0_ 0x00010000
265 #define GPIO_CFG_GPIODIR2_ 0x00000400
266 #define GPIO_CFG_GPIODIR1_ 0x00000200
267 #define GPIO_CFG_GPIODIR0_ 0x00000100
268 #define GPIO_CFG_GPIOD4_ 0x00000020
269 #define GPIO_CFG_GPIOD3_ 0x00000010
270 #define GPIO_CFG_GPIOD2_ 0x00000004
271 #define GPIO_CFG_GPIOD1_ 0x00000002
272 #define GPIO_CFG_GPIOD0_ 0x00000001
274 #define GPT_CFG 0x8C
275 #define GPT_CFG_TIMER_EN_ 0x20000000
276 #define GPT_CFG_GPT_LOAD_ 0x0000FFFF
278 #define GPT_CNT 0x90
279 #define GPT_CNT_GPT_CNT_ 0x0000FFFF
281 #define WORD_SWAP 0x98
283 #define FREE_RUN 0x9C
285 #define RX_DROP 0xA0
287 #define MAC_CSR_CMD 0xA4
288 #define MAC_CSR_CMD_CSR_BUSY_ 0x80000000
289 #define MAC_CSR_CMD_R_NOT_W_ 0x40000000
290 #define MAC_CSR_CMD_CSR_ADDR_ 0x000000FF
292 #define MAC_CSR_DATA 0xA8
294 #define AFC_CFG 0xAC
295 #define AFC_CFG_AFC_HI_ 0x00FF0000
296 #define AFC_CFG_AFC_LO_ 0x0000FF00
297 #define AFC_CFG_BACK_DUR_ 0x000000F0
298 #define AFC_CFG_FCMULT_ 0x00000008
299 #define AFC_CFG_FCBRD_ 0x00000004
300 #define AFC_CFG_FCADD_ 0x00000002
301 #define AFC_CFG_FCANY_ 0x00000001
303 #define E2P_CMD 0xB0
304 #define E2P_CMD_EPC_BUSY_ 0x80000000
305 #define E2P_CMD_EPC_CMD_ 0x70000000
306 #define E2P_CMD_EPC_CMD_READ_ 0x00000000
307 #define E2P_CMD_EPC_CMD_EWDS_ 0x10000000
308 #define E2P_CMD_EPC_CMD_EWEN_ 0x20000000
309 #define E2P_CMD_EPC_CMD_WRITE_ 0x30000000
310 #define E2P_CMD_EPC_CMD_WRAL_ 0x40000000
311 #define E2P_CMD_EPC_CMD_ERASE_ 0x50000000
312 #define E2P_CMD_EPC_CMD_ERAL_ 0x60000000
313 #define E2P_CMD_EPC_CMD_RELOAD_ 0x70000000
314 #define E2P_CMD_EPC_TIMEOUT_ 0x00000200
315 #define E2P_CMD_MAC_ADDR_LOADED_ 0x00000100
316 #define E2P_CMD_EPC_ADDR_ 0x000000FF
318 #define E2P_DATA 0xB4
319 #define E2P_DATA_EEPROM_DATA_ 0x000000FF
320 #define LAN_REGISTER_EXTENT 0x00000100
322 #define RESET_CTL 0x1F8
323 #define RESET_CTL_DIGITAL_RST_ 0x00000001
326 * MAC Control and Status Register (Indirect Address)
327 * Offset (through the MAC_CSR CMD and DATA port)
329 #define MAC_CR 0x01
330 #define MAC_CR_RXALL_ 0x80000000
331 #define MAC_CR_HBDIS_ 0x10000000
332 #define MAC_CR_RCVOWN_ 0x00800000
333 #define MAC_CR_LOOPBK_ 0x00200000
334 #define MAC_CR_FDPX_ 0x00100000
335 #define MAC_CR_MCPAS_ 0x00080000
336 #define MAC_CR_PRMS_ 0x00040000
337 #define MAC_CR_INVFILT_ 0x00020000
338 #define MAC_CR_PASSBAD_ 0x00010000
339 #define MAC_CR_HFILT_ 0x00008000
340 #define MAC_CR_HPFILT_ 0x00002000
341 #define MAC_CR_LCOLL_ 0x00001000
342 #define MAC_CR_BCAST_ 0x00000800
343 #define MAC_CR_DISRTY_ 0x00000400
344 #define MAC_CR_PADSTR_ 0x00000100
345 #define MAC_CR_BOLMT_MASK_ 0x000000C0
346 #define MAC_CR_DFCHK_ 0x00000020
347 #define MAC_CR_TXEN_ 0x00000008
348 #define MAC_CR_RXEN_ 0x00000004
350 #define ADDRH 0x02
352 #define ADDRL 0x03
354 #define HASHH 0x04
356 #define HASHL 0x05
358 #define MII_ACC 0x06
359 #define MII_ACC_PHY_ADDR_ 0x0000F800
360 #define MII_ACC_MIIRINDA_ 0x000007C0
361 #define MII_ACC_MII_WRITE_ 0x00000002
362 #define MII_ACC_MII_BUSY_ 0x00000001
364 #define MII_DATA 0x07
366 #define FLOW 0x08
367 #define FLOW_FCPT_ 0xFFFF0000
368 #define FLOW_FCPASS_ 0x00000004
369 #define FLOW_FCEN_ 0x00000002
370 #define FLOW_FCBSY_ 0x00000001
372 #define VLAN1 0x09
374 #define VLAN2 0x0A
376 #define WUFF 0x0B
378 #define WUCSR 0x0C
379 #define WUCSR_GUE_ 0x00000200
380 #define WUCSR_WUFR_ 0x00000040
381 #define WUCSR_MPR_ 0x00000020
382 #define WUCSR_WAKE_EN_ 0x00000004
383 #define WUCSR_MPEN_ 0x00000002
386 * Phy definitions (vendor-specific)
388 #define LAN9118_PHY_ID 0x00C0001C
390 #define MII_INTSTS 0x1D
392 #define MII_INTMSK 0x1E
393 #define PHY_INTMSK_AN_RCV_ (1 << 1)
394 #define PHY_INTMSK_PDFAULT_ (1 << 2)
395 #define PHY_INTMSK_AN_ACK_ (1 << 3)
396 #define PHY_INTMSK_LNKDOWN_ (1 << 4)
397 #define PHY_INTMSK_RFAULT_ (1 << 5)
398 #define PHY_INTMSK_AN_COMP_ (1 << 6)
399 #define PHY_INTMSK_ENERGYON_ (1 << 7)
400 #define PHY_INTMSK_DEFAULT_ (PHY_INTMSK_ENERGYON_ | \
401 PHY_INTMSK_AN_COMP_ | \
402 PHY_INTMSK_RFAULT_ | \
403 PHY_INTMSK_LNKDOWN_)
405 #define ADVERTISE_PAUSE_ALL (ADVERTISE_PAUSE_CAP | \
406 ADVERTISE_PAUSE_ASYM)
408 #define LPA_PAUSE_ALL (LPA_PAUSE_CAP | \
409 LPA_PAUSE_ASYM)
412 * Provide hooks to let the arch add to the initialisation procedure
413 * and to override the source of the MAC address.
415 #define SMSC_INITIALIZE() do {} while (0)
416 #define smsc_get_mac(dev) smsc911x_read_mac_address((dev))
418 #ifdef CONFIG_SMSC911X_ARCH_HOOKS
419 #include <asm/smsc911x.h>
420 #endif
422 #include <linux/smscphy.h>
424 #endif /* __SMSC911X_H__ */