btrfs: fix memory leaks after failure to lookup checksums during inode logging
[linux/fpc-iii.git] / sound / arm / aaci.h
blob18680e7f8d3a0b60cedb230c6148902545ab15bf
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * linux/sound/arm/aaci.c - ARM PrimeCell AACI PL041 driver
5 * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
6 */
7 #ifndef AACI_H
8 #define AACI_H
11 * Control and status register offsets
12 * P39.
14 #define AACI_CSCH1 0x000
15 #define AACI_CSCH2 0x014
16 #define AACI_CSCH3 0x028
17 #define AACI_CSCH4 0x03c
19 #define AACI_RXCR 0x000 /* 29 bits Control Rx FIFO */
20 #define AACI_TXCR 0x004 /* 17 bits Control Tx FIFO */
21 #define AACI_SR 0x008 /* 12 bits Status */
22 #define AACI_ISR 0x00c /* 7 bits Int Status */
23 #define AACI_IE 0x010 /* 7 bits Int Enable */
26 * Other registers
28 #define AACI_SL1RX 0x050
29 #define AACI_SL1TX 0x054
30 #define AACI_SL2RX 0x058
31 #define AACI_SL2TX 0x05c
32 #define AACI_SL12RX 0x060
33 #define AACI_SL12TX 0x064
34 #define AACI_SLFR 0x068 /* slot flags */
35 #define AACI_SLISTAT 0x06c /* slot interrupt status */
36 #define AACI_SLIEN 0x070 /* slot interrupt enable */
37 #define AACI_INTCLR 0x074 /* interrupt clear */
38 #define AACI_MAINCR 0x078 /* main control */
39 #define AACI_RESET 0x07c /* reset control */
40 #define AACI_SYNC 0x080 /* sync control */
41 #define AACI_ALLINTS 0x084 /* all fifo interrupt status */
42 #define AACI_MAINFR 0x088 /* main flag register */
43 #define AACI_DR1 0x090 /* data read/written fifo 1 */
44 #define AACI_DR2 0x0b0 /* data read/written fifo 2 */
45 #define AACI_DR3 0x0d0 /* data read/written fifo 3 */
46 #define AACI_DR4 0x0f0 /* data read/written fifo 4 */
49 * TX/RX fifo control register (CR). P48
51 #define CR_FEN (1 << 16) /* fifo enable */
52 #define CR_COMPACT (1 << 15) /* compact mode */
53 #define CR_SZ16 (0 << 13) /* 16 bits */
54 #define CR_SZ18 (1 << 13) /* 18 bits */
55 #define CR_SZ20 (2 << 13) /* 20 bits */
56 #define CR_SZ12 (3 << 13) /* 12 bits */
57 #define CR_SL12 (1 << 12)
58 #define CR_SL11 (1 << 11)
59 #define CR_SL10 (1 << 10)
60 #define CR_SL9 (1 << 9)
61 #define CR_SL8 (1 << 8)
62 #define CR_SL7 (1 << 7)
63 #define CR_SL6 (1 << 6)
64 #define CR_SL5 (1 << 5)
65 #define CR_SL4 (1 << 4)
66 #define CR_SL3 (1 << 3)
67 #define CR_SL2 (1 << 2)
68 #define CR_SL1 (1 << 1)
69 #define CR_EN (1 << 0) /* transmit enable */
72 * status register bits. P49
74 #define SR_RXTOFE (1 << 11) /* rx timeout fifo empty */
75 #define SR_TXTO (1 << 10) /* rx timeout fifo nonempty */
76 #define SR_TXU (1 << 9) /* tx underrun */
77 #define SR_RXO (1 << 8) /* rx overrun */
78 #define SR_TXB (1 << 7) /* tx busy */
79 #define SR_RXB (1 << 6) /* rx busy */
80 #define SR_TXFF (1 << 5) /* tx fifo full */
81 #define SR_RXFF (1 << 4) /* rx fifo full */
82 #define SR_TXHE (1 << 3) /* tx fifo half empty */
83 #define SR_RXHF (1 << 2) /* rx fifo half full */
84 #define SR_TXFE (1 << 1) /* tx fifo empty */
85 #define SR_RXFE (1 << 0) /* rx fifo empty */
88 * interrupt status register bits.
90 #define ISR_RXTOFEINTR (1 << 6) /* rx fifo empty */
91 #define ISR_URINTR (1 << 5) /* tx underflow */
92 #define ISR_ORINTR (1 << 4) /* rx overflow */
93 #define ISR_RXINTR (1 << 3) /* rx fifo */
94 #define ISR_TXINTR (1 << 2) /* tx fifo intr */
95 #define ISR_RXTOINTR (1 << 1) /* tx timeout */
96 #define ISR_TXCINTR (1 << 0) /* tx complete */
99 * interrupt enable register bits.
101 #define IE_RXTOIE (1 << 6)
102 #define IE_URIE (1 << 5)
103 #define IE_ORIE (1 << 4)
104 #define IE_RXIE (1 << 3)
105 #define IE_TXIE (1 << 2)
106 #define IE_RXTIE (1 << 1)
107 #define IE_TXCIE (1 << 0)
110 * interrupt status. P51
112 #define ISR_RXTOFE (1 << 6) /* rx timeout fifo empty */
113 #define ISR_UR (1 << 5) /* tx fifo underrun */
114 #define ISR_OR (1 << 4) /* rx fifo overrun */
115 #define ISR_RX (1 << 3) /* rx interrupt status */
116 #define ISR_TX (1 << 2) /* tx interrupt status */
117 #define ISR_RXTO (1 << 1) /* rx timeout */
118 #define ISR_TXC (1 << 0) /* tx complete */
121 * interrupt enable. P52
123 #define IE_RXTOFE (1 << 6) /* rx timeout fifo empty */
124 #define IE_UR (1 << 5) /* tx fifo underrun */
125 #define IE_OR (1 << 4) /* rx fifo overrun */
126 #define IE_RX (1 << 3) /* rx interrupt status */
127 #define IE_TX (1 << 2) /* tx interrupt status */
128 #define IE_RXTO (1 << 1) /* rx timeout */
129 #define IE_TXC (1 << 0) /* tx complete */
132 * slot flag register bits. P56
134 #define SLFR_RWIS (1 << 13) /* raw wake-up interrupt status */
135 #define SLFR_RGPIOINTR (1 << 12) /* raw gpio interrupt */
136 #define SLFR_12TXE (1 << 11) /* slot 12 tx empty */
137 #define SLFR_12RXV (1 << 10) /* slot 12 rx valid */
138 #define SLFR_2TXE (1 << 9) /* slot 2 tx empty */
139 #define SLFR_2RXV (1 << 8) /* slot 2 rx valid */
140 #define SLFR_1TXE (1 << 7) /* slot 1 tx empty */
141 #define SLFR_1RXV (1 << 6) /* slot 1 rx valid */
142 #define SLFR_12TXB (1 << 5) /* slot 12 tx busy */
143 #define SLFR_12RXB (1 << 4) /* slot 12 rx busy */
144 #define SLFR_2TXB (1 << 3) /* slot 2 tx busy */
145 #define SLFR_2RXB (1 << 2) /* slot 2 rx busy */
146 #define SLFR_1TXB (1 << 1) /* slot 1 tx busy */
147 #define SLFR_1RXB (1 << 0) /* slot 1 rx busy */
150 * Interrupt clear register.
152 #define ICLR_RXTOFEC4 (1 << 12)
153 #define ICLR_RXTOFEC3 (1 << 11)
154 #define ICLR_RXTOFEC2 (1 << 10)
155 #define ICLR_RXTOFEC1 (1 << 9)
156 #define ICLR_TXUEC4 (1 << 8)
157 #define ICLR_TXUEC3 (1 << 7)
158 #define ICLR_TXUEC2 (1 << 6)
159 #define ICLR_TXUEC1 (1 << 5)
160 #define ICLR_RXOEC4 (1 << 4)
161 #define ICLR_RXOEC3 (1 << 3)
162 #define ICLR_RXOEC2 (1 << 2)
163 #define ICLR_RXOEC1 (1 << 1)
164 #define ICLR_WISC (1 << 0)
167 * Main control register bits. P62
169 #define MAINCR_SCRA(x) ((x) << 10) /* secondary codec reg access */
170 #define MAINCR_DMAEN (1 << 9) /* dma enable */
171 #define MAINCR_SL12TXEN (1 << 8) /* slot 12 transmit enable */
172 #define MAINCR_SL12RXEN (1 << 7) /* slot 12 receive enable */
173 #define MAINCR_SL2TXEN (1 << 6) /* slot 2 transmit enable */
174 #define MAINCR_SL2RXEN (1 << 5) /* slot 2 receive enable */
175 #define MAINCR_SL1TXEN (1 << 4) /* slot 1 transmit enable */
176 #define MAINCR_SL1RXEN (1 << 3) /* slot 1 receive enable */
177 #define MAINCR_LPM (1 << 2) /* low power mode */
178 #define MAINCR_LOOPBK (1 << 1) /* loopback */
179 #define MAINCR_IE (1 << 0) /* aaci interface enable */
182 * Reset register bits. P65
184 #define RESET_NRST (1 << 0)
187 * Sync register bits. P65
189 #define SYNC_FORCE (1 << 0)
192 * Main flag register bits. P66
194 #define MAINFR_TXB (1 << 1) /* transmit busy */
195 #define MAINFR_RXB (1 << 0) /* receive busy */
199 struct aaci_runtime {
200 void __iomem *base;
201 void __iomem *fifo;
202 spinlock_t lock;
204 struct ac97_pcm *pcm;
205 int pcm_open;
207 u32 cr;
208 struct snd_pcm_substream *substream;
210 unsigned int period; /* byte size of a "period" */
213 * PIO support
215 void *start;
216 void *end;
217 void *ptr;
218 int bytes;
219 unsigned int fifo_bytes;
222 struct aaci {
223 struct amba_device *dev;
224 struct snd_card *card;
225 void __iomem *base;
226 unsigned int fifo_depth;
227 unsigned int users;
228 struct mutex irq_lock;
230 /* AC'97 */
231 struct mutex ac97_sem;
232 struct snd_ac97_bus *ac97_bus;
233 struct snd_ac97 *ac97;
235 u32 maincr;
237 struct aaci_runtime playback;
238 struct aaci_runtime capture;
240 struct snd_pcm *pcm;
243 #define ACSTREAM_FRONT 0
244 #define ACSTREAM_SURROUND 1
245 #define ACSTREAM_LFE 2
247 #endif