bna: use device model DMA API
[linux/fpc-iii.git] / drivers / tty / serial / altera_uart.c
blob721216292a5049882847e9712735b0ca82950b1e
1 /*
2 * altera_uart.c -- Altera UART driver
4 * Based on mcf.c -- Freescale ColdFire UART driver
6 * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
7 * (C) Copyright 2008, Thomas Chou <thomas@wytron.com.tw>
8 * (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
16 #include <linux/kernel.h>
17 #include <linux/init.h>
18 #include <linux/timer.h>
19 #include <linux/interrupt.h>
20 #include <linux/module.h>
21 #include <linux/console.h>
22 #include <linux/tty.h>
23 #include <linux/tty_flip.h>
24 #include <linux/serial.h>
25 #include <linux/serial_core.h>
26 #include <linux/platform_device.h>
27 #include <linux/io.h>
28 #include <linux/altera_uart.h>
30 #define DRV_NAME "altera_uart"
31 #define SERIAL_ALTERA_MAJOR 204
32 #define SERIAL_ALTERA_MINOR 213
35 * Altera UART register definitions according to the Nios UART datasheet:
36 * http://www.altera.com/literature/ds/ds_nios_uart.pdf
39 #define ALTERA_UART_SIZE 32
41 #define ALTERA_UART_RXDATA_REG 0
42 #define ALTERA_UART_TXDATA_REG 4
43 #define ALTERA_UART_STATUS_REG 8
44 #define ALTERA_UART_CONTROL_REG 12
45 #define ALTERA_UART_DIVISOR_REG 16
46 #define ALTERA_UART_EOP_REG 20
48 #define ALTERA_UART_STATUS_PE_MSK 0x0001 /* parity error */
49 #define ALTERA_UART_STATUS_FE_MSK 0x0002 /* framing error */
50 #define ALTERA_UART_STATUS_BRK_MSK 0x0004 /* break */
51 #define ALTERA_UART_STATUS_ROE_MSK 0x0008 /* RX overrun error */
52 #define ALTERA_UART_STATUS_TOE_MSK 0x0010 /* TX overrun error */
53 #define ALTERA_UART_STATUS_TMT_MSK 0x0020 /* TX shift register state */
54 #define ALTERA_UART_STATUS_TRDY_MSK 0x0040 /* TX ready */
55 #define ALTERA_UART_STATUS_RRDY_MSK 0x0080 /* RX ready */
56 #define ALTERA_UART_STATUS_E_MSK 0x0100 /* exception condition */
57 #define ALTERA_UART_STATUS_DCTS_MSK 0x0400 /* CTS logic-level change */
58 #define ALTERA_UART_STATUS_CTS_MSK 0x0800 /* CTS logic state */
59 #define ALTERA_UART_STATUS_EOP_MSK 0x1000 /* EOP written/read */
61 /* Enable interrupt on... */
62 #define ALTERA_UART_CONTROL_PE_MSK 0x0001 /* ...parity error */
63 #define ALTERA_UART_CONTROL_FE_MSK 0x0002 /* ...framing error */
64 #define ALTERA_UART_CONTROL_BRK_MSK 0x0004 /* ...break */
65 #define ALTERA_UART_CONTROL_ROE_MSK 0x0008 /* ...RX overrun */
66 #define ALTERA_UART_CONTROL_TOE_MSK 0x0010 /* ...TX overrun */
67 #define ALTERA_UART_CONTROL_TMT_MSK 0x0020 /* ...TX shift register empty */
68 #define ALTERA_UART_CONTROL_TRDY_MSK 0x0040 /* ...TX ready */
69 #define ALTERA_UART_CONTROL_RRDY_MSK 0x0080 /* ...RX ready */
70 #define ALTERA_UART_CONTROL_E_MSK 0x0100 /* ...exception*/
72 #define ALTERA_UART_CONTROL_TRBK_MSK 0x0200 /* TX break */
73 #define ALTERA_UART_CONTROL_DCTS_MSK 0x0400 /* Interrupt on CTS change */
74 #define ALTERA_UART_CONTROL_RTS_MSK 0x0800 /* RTS signal */
75 #define ALTERA_UART_CONTROL_EOP_MSK 0x1000 /* Interrupt on EOP */
78 * Local per-uart structure.
80 struct altera_uart {
81 struct uart_port port;
82 struct timer_list tmr;
83 unsigned int sigs; /* Local copy of line sigs */
84 unsigned short imr; /* Local IMR mirror */
87 static u32 altera_uart_readl(struct uart_port *port, int reg)
89 struct altera_uart_platform_uart *platp = port->private_data;
91 return readl(port->membase + (reg << platp->bus_shift));
94 static void altera_uart_writel(struct uart_port *port, u32 dat, int reg)
96 struct altera_uart_platform_uart *platp = port->private_data;
98 writel(dat, port->membase + (reg << platp->bus_shift));
101 static unsigned int altera_uart_tx_empty(struct uart_port *port)
103 return (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
104 ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0;
107 static unsigned int altera_uart_get_mctrl(struct uart_port *port)
109 struct altera_uart *pp = container_of(port, struct altera_uart, port);
110 unsigned int sigs;
112 sigs = (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
113 ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0;
114 sigs |= (pp->sigs & TIOCM_RTS);
116 return sigs;
119 static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
121 struct altera_uart *pp = container_of(port, struct altera_uart, port);
123 pp->sigs = sigs;
124 if (sigs & TIOCM_RTS)
125 pp->imr |= ALTERA_UART_CONTROL_RTS_MSK;
126 else
127 pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK;
128 altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
131 static void altera_uart_start_tx(struct uart_port *port)
133 struct altera_uart *pp = container_of(port, struct altera_uart, port);
135 pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK;
136 altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
139 static void altera_uart_stop_tx(struct uart_port *port)
141 struct altera_uart *pp = container_of(port, struct altera_uart, port);
143 pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
144 altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
147 static void altera_uart_stop_rx(struct uart_port *port)
149 struct altera_uart *pp = container_of(port, struct altera_uart, port);
151 pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK;
152 altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
155 static void altera_uart_break_ctl(struct uart_port *port, int break_state)
157 struct altera_uart *pp = container_of(port, struct altera_uart, port);
158 unsigned long flags;
160 spin_lock_irqsave(&port->lock, flags);
161 if (break_state == -1)
162 pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK;
163 else
164 pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK;
165 altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
166 spin_unlock_irqrestore(&port->lock, flags);
169 static void altera_uart_enable_ms(struct uart_port *port)
173 static void altera_uart_set_termios(struct uart_port *port,
174 struct ktermios *termios,
175 struct ktermios *old)
177 unsigned long flags;
178 unsigned int baud, baudclk;
180 baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
181 baudclk = port->uartclk / baud;
183 if (old)
184 tty_termios_copy_hw(termios, old);
185 tty_termios_encode_baud_rate(termios, baud, baud);
187 spin_lock_irqsave(&port->lock, flags);
188 uart_update_timeout(port, termios->c_cflag, baud);
189 altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG);
190 spin_unlock_irqrestore(&port->lock, flags);
193 static void altera_uart_rx_chars(struct altera_uart *pp)
195 struct uart_port *port = &pp->port;
196 unsigned char ch, flag;
197 unsigned short status;
199 while ((status = altera_uart_readl(port, ALTERA_UART_STATUS_REG)) &
200 ALTERA_UART_STATUS_RRDY_MSK) {
201 ch = altera_uart_readl(port, ALTERA_UART_RXDATA_REG);
202 flag = TTY_NORMAL;
203 port->icount.rx++;
205 if (status & ALTERA_UART_STATUS_E_MSK) {
206 altera_uart_writel(port, status,
207 ALTERA_UART_STATUS_REG);
209 if (status & ALTERA_UART_STATUS_BRK_MSK) {
210 port->icount.brk++;
211 if (uart_handle_break(port))
212 continue;
213 } else if (status & ALTERA_UART_STATUS_PE_MSK) {
214 port->icount.parity++;
215 } else if (status & ALTERA_UART_STATUS_ROE_MSK) {
216 port->icount.overrun++;
217 } else if (status & ALTERA_UART_STATUS_FE_MSK) {
218 port->icount.frame++;
221 status &= port->read_status_mask;
223 if (status & ALTERA_UART_STATUS_BRK_MSK)
224 flag = TTY_BREAK;
225 else if (status & ALTERA_UART_STATUS_PE_MSK)
226 flag = TTY_PARITY;
227 else if (status & ALTERA_UART_STATUS_FE_MSK)
228 flag = TTY_FRAME;
231 if (uart_handle_sysrq_char(port, ch))
232 continue;
233 uart_insert_char(port, status, ALTERA_UART_STATUS_ROE_MSK, ch,
234 flag);
237 tty_flip_buffer_push(port->state->port.tty);
240 static void altera_uart_tx_chars(struct altera_uart *pp)
242 struct uart_port *port = &pp->port;
243 struct circ_buf *xmit = &port->state->xmit;
245 if (port->x_char) {
246 /* Send special char - probably flow control */
247 altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG);
248 port->x_char = 0;
249 port->icount.tx++;
250 return;
253 while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
254 ALTERA_UART_STATUS_TRDY_MSK) {
255 if (xmit->head == xmit->tail)
256 break;
257 altera_uart_writel(port, xmit->buf[xmit->tail],
258 ALTERA_UART_TXDATA_REG);
259 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
260 port->icount.tx++;
263 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
264 uart_write_wakeup(port);
266 if (xmit->head == xmit->tail) {
267 pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
268 altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
272 static irqreturn_t altera_uart_interrupt(int irq, void *data)
274 struct uart_port *port = data;
275 struct altera_uart *pp = container_of(port, struct altera_uart, port);
276 unsigned int isr;
278 isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr;
280 spin_lock(&port->lock);
281 if (isr & ALTERA_UART_STATUS_RRDY_MSK)
282 altera_uart_rx_chars(pp);
283 if (isr & ALTERA_UART_STATUS_TRDY_MSK)
284 altera_uart_tx_chars(pp);
285 spin_unlock(&port->lock);
287 return IRQ_RETVAL(isr);
290 static void altera_uart_timer(unsigned long data)
292 struct uart_port *port = (void *)data;
293 struct altera_uart *pp = container_of(port, struct altera_uart, port);
295 altera_uart_interrupt(0, port);
296 mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
299 static void altera_uart_config_port(struct uart_port *port, int flags)
301 port->type = PORT_ALTERA_UART;
303 /* Clear mask, so no surprise interrupts. */
304 altera_uart_writel(port, 0, ALTERA_UART_CONTROL_REG);
305 /* Clear status register */
306 altera_uart_writel(port, 0, ALTERA_UART_STATUS_REG);
309 static int altera_uart_startup(struct uart_port *port)
311 struct altera_uart *pp = container_of(port, struct altera_uart, port);
312 unsigned long flags;
313 int ret;
315 if (!port->irq) {
316 setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port);
317 mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
318 return 0;
321 ret = request_irq(port->irq, altera_uart_interrupt, IRQF_DISABLED,
322 DRV_NAME, port);
323 if (ret) {
324 pr_err(DRV_NAME ": unable to attach Altera UART %d "
325 "interrupt vector=%d\n", port->line, port->irq);
326 return ret;
329 spin_lock_irqsave(&port->lock, flags);
331 /* Enable RX interrupts now */
332 pp->imr = ALTERA_UART_CONTROL_RRDY_MSK;
333 writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
335 spin_unlock_irqrestore(&port->lock, flags);
337 return 0;
340 static void altera_uart_shutdown(struct uart_port *port)
342 struct altera_uart *pp = container_of(port, struct altera_uart, port);
343 unsigned long flags;
345 spin_lock_irqsave(&port->lock, flags);
347 /* Disable all interrupts now */
348 pp->imr = 0;
349 writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
351 spin_unlock_irqrestore(&port->lock, flags);
353 if (port->irq)
354 free_irq(port->irq, port);
355 else
356 del_timer_sync(&pp->tmr);
359 static const char *altera_uart_type(struct uart_port *port)
361 return (port->type == PORT_ALTERA_UART) ? "Altera UART" : NULL;
364 static int altera_uart_request_port(struct uart_port *port)
366 /* UARTs always present */
367 return 0;
370 static void altera_uart_release_port(struct uart_port *port)
372 /* Nothing to release... */
375 static int altera_uart_verify_port(struct uart_port *port,
376 struct serial_struct *ser)
378 if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_ALTERA_UART))
379 return -EINVAL;
380 return 0;
384 * Define the basic serial functions we support.
386 static struct uart_ops altera_uart_ops = {
387 .tx_empty = altera_uart_tx_empty,
388 .get_mctrl = altera_uart_get_mctrl,
389 .set_mctrl = altera_uart_set_mctrl,
390 .start_tx = altera_uart_start_tx,
391 .stop_tx = altera_uart_stop_tx,
392 .stop_rx = altera_uart_stop_rx,
393 .enable_ms = altera_uart_enable_ms,
394 .break_ctl = altera_uart_break_ctl,
395 .startup = altera_uart_startup,
396 .shutdown = altera_uart_shutdown,
397 .set_termios = altera_uart_set_termios,
398 .type = altera_uart_type,
399 .request_port = altera_uart_request_port,
400 .release_port = altera_uart_release_port,
401 .config_port = altera_uart_config_port,
402 .verify_port = altera_uart_verify_port,
405 static struct altera_uart altera_uart_ports[CONFIG_SERIAL_ALTERA_UART_MAXPORTS];
407 #if defined(CONFIG_SERIAL_ALTERA_UART_CONSOLE)
409 int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp)
411 struct uart_port *port;
412 int i;
414 for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) {
415 port = &altera_uart_ports[i].port;
417 port->line = i;
418 port->type = PORT_ALTERA_UART;
419 port->mapbase = platp[i].mapbase;
420 port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
421 port->iotype = SERIAL_IO_MEM;
422 port->irq = platp[i].irq;
423 port->uartclk = platp[i].uartclk;
424 port->flags = UPF_BOOT_AUTOCONF;
425 port->ops = &altera_uart_ops;
426 port->private_data = platp;
429 return 0;
432 static void altera_uart_console_putc(struct uart_port *port, const char c)
434 while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
435 ALTERA_UART_STATUS_TRDY_MSK))
436 cpu_relax();
438 writel(c, port->membase + ALTERA_UART_TXDATA_REG);
441 static void altera_uart_console_write(struct console *co, const char *s,
442 unsigned int count)
444 struct uart_port *port = &(altera_uart_ports + co->index)->port;
446 for (; count; count--, s++) {
447 altera_uart_console_putc(port, *s);
448 if (*s == '\n')
449 altera_uart_console_putc(port, '\r');
453 static int __init altera_uart_console_setup(struct console *co, char *options)
455 struct uart_port *port;
456 int baud = CONFIG_SERIAL_ALTERA_UART_BAUDRATE;
457 int bits = 8;
458 int parity = 'n';
459 int flow = 'n';
461 if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
462 return -EINVAL;
463 port = &altera_uart_ports[co->index].port;
464 if (!port->membase)
465 return -ENODEV;
467 if (options)
468 uart_parse_options(options, &baud, &parity, &bits, &flow);
470 return uart_set_options(port, co, baud, parity, bits, flow);
473 static struct uart_driver altera_uart_driver;
475 static struct console altera_uart_console = {
476 .name = "ttyAL",
477 .write = altera_uart_console_write,
478 .device = uart_console_device,
479 .setup = altera_uart_console_setup,
480 .flags = CON_PRINTBUFFER,
481 .index = -1,
482 .data = &altera_uart_driver,
485 static int __init altera_uart_console_init(void)
487 register_console(&altera_uart_console);
488 return 0;
491 console_initcall(altera_uart_console_init);
493 #define ALTERA_UART_CONSOLE (&altera_uart_console)
495 #else
497 #define ALTERA_UART_CONSOLE NULL
499 #endif /* CONFIG_ALTERA_UART_CONSOLE */
502 * Define the altera_uart UART driver structure.
504 static struct uart_driver altera_uart_driver = {
505 .owner = THIS_MODULE,
506 .driver_name = DRV_NAME,
507 .dev_name = "ttyAL",
508 .major = SERIAL_ALTERA_MAJOR,
509 .minor = SERIAL_ALTERA_MINOR,
510 .nr = CONFIG_SERIAL_ALTERA_UART_MAXPORTS,
511 .cons = ALTERA_UART_CONSOLE,
514 static int __devinit altera_uart_probe(struct platform_device *pdev)
516 struct altera_uart_platform_uart *platp = pdev->dev.platform_data;
517 struct uart_port *port;
518 struct resource *res_mem;
519 struct resource *res_irq;
520 int i = pdev->id;
522 /* -1 emphasizes that the platform must have one port, no .N suffix */
523 if (i == -1)
524 i = 0;
526 if (i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
527 return -EINVAL;
529 port = &altera_uart_ports[i].port;
531 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
532 if (res_mem)
533 port->mapbase = res_mem->start;
534 else if (platp->mapbase)
535 port->mapbase = platp->mapbase;
536 else
537 return -EINVAL;
539 res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
540 if (res_irq)
541 port->irq = res_irq->start;
542 else if (platp->irq)
543 port->irq = platp->irq;
545 port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
546 if (!port->membase)
547 return -ENOMEM;
549 port->line = i;
550 port->type = PORT_ALTERA_UART;
551 port->iotype = SERIAL_IO_MEM;
552 port->uartclk = platp->uartclk;
553 port->ops = &altera_uart_ops;
554 port->flags = UPF_BOOT_AUTOCONF;
555 port->private_data = platp;
557 uart_add_one_port(&altera_uart_driver, port);
559 return 0;
562 static int __devexit altera_uart_remove(struct platform_device *pdev)
564 struct uart_port *port = &altera_uart_ports[pdev->id].port;
566 uart_remove_one_port(&altera_uart_driver, port);
567 return 0;
570 static struct platform_driver altera_uart_platform_driver = {
571 .probe = altera_uart_probe,
572 .remove = __devexit_p(altera_uart_remove),
573 .driver = {
574 .name = DRV_NAME,
575 .owner = THIS_MODULE,
576 .pm = NULL,
580 static int __init altera_uart_init(void)
582 int rc;
584 rc = uart_register_driver(&altera_uart_driver);
585 if (rc)
586 return rc;
587 rc = platform_driver_register(&altera_uart_platform_driver);
588 if (rc) {
589 uart_unregister_driver(&altera_uart_driver);
590 return rc;
592 return 0;
595 static void __exit altera_uart_exit(void)
597 platform_driver_unregister(&altera_uart_platform_driver);
598 uart_unregister_driver(&altera_uart_driver);
601 module_init(altera_uart_init);
602 module_exit(altera_uart_exit);
604 MODULE_DESCRIPTION("Altera UART driver");
605 MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
606 MODULE_LICENSE("GPL");
607 MODULE_ALIAS("platform:" DRV_NAME);
608 MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_ALTERA_MAJOR);