?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
bna: use device model DMA API
[linux/fpc-iii.git] / drivers / tty / serial / vt8500_serial.c
blob322bf56c0d89ded465510a5a22a5f73b62b7a3e9
1 /*
2 * drivers/serial/vt8500_serial.c
3 *
4 * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
5 *
6 * Based on msm_serial.c, which is:
7 * Copyright (C) 2007 Google, Inc.
8 * Author: Robert Love <rlove@google.com>
9 *
10 * This software is licensed under the terms of the GNU General Public
11 * License version 2, as published by the Free Software Foundation, and
12 * may be copied, distributed, and modified under those terms.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 */
19
20 #if defined(CONFIG_SERIAL_VT8500_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
21 # define SUPPORT_SYSRQ
22 #endif
23
24 #include <linux/hrtimer.h>
25 #include <linux/delay.h>
26 #include <linux/module.h>
27 #include <linux/io.h>
28 #include <linux/ioport.h>
29 #include <linux/irq.h>
30 #include <linux/init.h>
31 #include <linux/console.h>
32 #include <linux/tty.h>
33 #include <linux/tty_flip.h>
34 #include <linux/serial_core.h>
35 #include <linux/serial.h>
36 #include <linux/slab.h>
37 #include <linux/clk.h>
38 #include <linux/platform_device.h>
39
40 /*
41 * UART Register offsets
42 */
43
44 #define VT8500_URTDR 0x0000 /* Transmit data */
45 #define VT8500_URRDR 0x0004 /* Receive data */
46 #define VT8500_URDIV 0x0008 /* Clock/Baud rate divisor */
47 #define VT8500_URLCR 0x000C /* Line control */
48 #define VT8500_URICR 0x0010 /* IrDA control */
49 #define VT8500_URIER 0x0014 /* Interrupt enable */
50 #define VT8500_URISR 0x0018 /* Interrupt status */
51 #define VT8500_URUSR 0x001c /* UART status */
52 #define VT8500_URFCR 0x0020 /* FIFO control */
53 #define VT8500_URFIDX 0x0024 /* FIFO index */
54 #define VT8500_URBKR 0x0028 /* Break signal count */
55 #define VT8500_URTOD 0x002c /* Time out divisor */
56 #define VT8500_TXFIFO 0x1000 /* Transmit FIFO (16x8) */
57 #define VT8500_RXFIFO 0x1020 /* Receive FIFO (16x10) */
58
59 /*
60 * Interrupt enable and status bits
61 */
62
63 #define TXDE (1 << 0) /* Tx Data empty */
64 #define RXDF (1 << 1) /* Rx Data full */
65 #define TXFAE (1 << 2) /* Tx FIFO almost empty */
66 #define TXFE (1 << 3) /* Tx FIFO empty */
67 #define RXFAF (1 << 4) /* Rx FIFO almost full */
68 #define RXFF (1 << 5) /* Rx FIFO full */
69 #define TXUDR (1 << 6) /* Tx underrun */
70 #define RXOVER (1 << 7) /* Rx overrun */
71 #define PER (1 << 8) /* Parity error */
72 #define FER (1 << 9) /* Frame error */
73 #define TCTS (1 << 10) /* Toggle of CTS */
74 #define RXTOUT (1 << 11) /* Rx timeout */
75 #define BKDONE (1 << 12) /* Break signal done */
76 #define ERR (1 << 13) /* AHB error response */
77
78 #define RX_FIFO_INTS (RXFAF | RXFF | RXOVER | PER | FER | RXTOUT)
79 #define TX_FIFO_INTS (TXFAE | TXFE | TXUDR)
80
81 struct vt8500_port {
82 struct uart_port uart;
83 char name[16];
84 struct clk *clk;
85 unsigned int ier;
86 };
87
88 static inline void vt8500_write(struct uart_port *port, unsigned int val,
89 unsigned int off)
90 {
91 writel(val, port->membase + off);
92 }
93
94 static inline unsigned int vt8500_read(struct uart_port *port, unsigned int off)
95 {
96 return readl(port->membase + off);
97 }
98
99 static void vt8500_stop_tx(struct uart_port *port)
100 {
101 struct vt8500_port *vt8500_port = container_of(port,
102 struct vt8500_port,
103 uart);
104
105 vt8500_port->ier &= ~TX_FIFO_INTS;
106 vt8500_write(port, vt8500_port->ier, VT8500_URIER);
107 }
108
109 static void vt8500_stop_rx(struct uart_port *port)
110 {
111 struct vt8500_port *vt8500_port = container_of(port,
112 struct vt8500_port,
113 uart);
114
115 vt8500_port->ier &= ~RX_FIFO_INTS;
116 vt8500_write(port, vt8500_port->ier, VT8500_URIER);
117 }
118
119 static void vt8500_enable_ms(struct uart_port *port)
120 {
121 struct vt8500_port *vt8500_port = container_of(port,
122 struct vt8500_port,
123 uart);
124
125 vt8500_port->ier |= TCTS;
126 vt8500_write(port, vt8500_port->ier, VT8500_URIER);
127 }
128
129 static void handle_rx(struct uart_port *port)
130 {
131 struct tty_struct *tty = tty_port_tty_get(&port->state->port);
132 if (!tty) {
133 /* Discard data: no tty available */
134 int count = (vt8500_read(port, VT8500_URFIDX) & 0x1f00) >> 8;
135 u16 ch;
136 while (count--)
137 ch = readw(port->membase + VT8500_RXFIFO);
138 return;
139 }
140
141 /*
142 * Handle overrun
143 */
144 if ((vt8500_read(port, VT8500_URISR) & RXOVER)) {
145 port->icount.overrun++;
146 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
147 }
148
149 /* and now the main RX loop */
150 while (vt8500_read(port, VT8500_URFIDX) & 0x1f00) {
151 unsigned int c;
152 char flag = TTY_NORMAL;
153
154 c = readw(port->membase + VT8500_RXFIFO) & 0x3ff;
155
156 /* Mask conditions we're ignorning. */
157 c &= ~port->read_status_mask;
158
159 if (c & FER) {
160 port->icount.frame++;
161 flag = TTY_FRAME;
162 } else if (c & PER) {
163 port->icount.parity++;
164 flag = TTY_PARITY;
165 }
166 port->icount.rx++;
167
168 if (!uart_handle_sysrq_char(port, c))
169 tty_insert_flip_char(tty, c, flag);
170 }
171
172 tty_flip_buffer_push(tty);
173 tty_kref_put(tty);
174 }
175
176 static void handle_tx(struct uart_port *port)
177 {
178 struct circ_buf *xmit = &port->state->xmit;
179
180 if (port->x_char) {
181 writeb(port->x_char, port->membase + VT8500_TXFIFO);
182 port->icount.tx++;
183 port->x_char = 0;
184 }
185 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
186 vt8500_stop_tx(port);
187 return;
188 }
189
190 while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) {
191 if (uart_circ_empty(xmit))
192 break;
193
194 writeb(xmit->buf[xmit->tail], port->membase + VT8500_TXFIFO);
195
196 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
197 port->icount.tx++;
198 }
199
200 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
201 uart_write_wakeup(port);
202
203 if (uart_circ_empty(xmit))
204 vt8500_stop_tx(port);
205 }
206
207 static void vt8500_start_tx(struct uart_port *port)
208 {
209 struct vt8500_port *vt8500_port = container_of(port,
210 struct vt8500_port,
211 uart);
212
213 vt8500_port->ier &= ~TX_FIFO_INTS;
214 vt8500_write(port, vt8500_port->ier, VT8500_URIER);
215 handle_tx(port);
216 vt8500_port->ier |= TX_FIFO_INTS;
217 vt8500_write(port, vt8500_port->ier, VT8500_URIER);
218 }
219
220 static void handle_delta_cts(struct uart_port *port)
221 {
222 port->icount.cts++;
223 wake_up_interruptible(&port->state->port.delta_msr_wait);
224 }
225
226 static irqreturn_t vt8500_irq(int irq, void *dev_id)
227 {
228 struct uart_port *port = dev_id;
229 unsigned long isr;
230
231 spin_lock(&port->lock);
232 isr = vt8500_read(port, VT8500_URISR);
233
234 /* Acknowledge active status bits */
235 vt8500_write(port, isr, VT8500_URISR);
236
237 if (isr & RX_FIFO_INTS)
238 handle_rx(port);
239 if (isr & TX_FIFO_INTS)
240 handle_tx(port);
241 if (isr & TCTS)
242 handle_delta_cts(port);
243
244 spin_unlock(&port->lock);
245
246 return IRQ_HANDLED;
247 }
248
249 static unsigned int vt8500_tx_empty(struct uart_port *port)
250 {
251 return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ?
252 TIOCSER_TEMT : 0;
253 }
254
255 static unsigned int vt8500_get_mctrl(struct uart_port *port)
256 {
257 unsigned int usr;
258
259 usr = vt8500_read(port, VT8500_URUSR);
260 if (usr & (1 << 4))
261 return TIOCM_CTS;
262 else
263 return 0;
264 }
265
266 static void vt8500_set_mctrl(struct uart_port *port, unsigned int mctrl)
267 {
268 }
269
270 static void vt8500_break_ctl(struct uart_port *port, int break_ctl)
271 {
272 if (break_ctl)
273 vt8500_write(port, vt8500_read(port, VT8500_URLCR) | (1 << 9),
274 VT8500_URLCR);
275 }
276
277 static int vt8500_set_baud_rate(struct uart_port *port, unsigned int baud)
278 {
279 unsigned long div;
280 unsigned int loops = 1000;
281
282 div = vt8500_read(port, VT8500_URDIV) & ~(0x3ff);
283
284 if (unlikely((baud < 900) || (baud > 921600)))
285 div |= 7;
286 else
287 div |= (921600 / baud) - 1;
288
289 while ((vt8500_read(port, VT8500_URUSR) & (1 << 5)) && --loops)
290 cpu_relax();
291 vt8500_write(port, div, VT8500_URDIV);
292
293 return baud;
294 }
295
296 static int vt8500_startup(struct uart_port *port)
297 {
298 struct vt8500_port *vt8500_port =
299 container_of(port, struct vt8500_port, uart);
300 int ret;
301
302 snprintf(vt8500_port->name, sizeof(vt8500_port->name),
303 "vt8500_serial%d", port->line);
304
305 ret = request_irq(port->irq, vt8500_irq, IRQF_TRIGGER_HIGH,
306 vt8500_port->name, port);
307 if (unlikely(ret))
308 return ret;
309
310 vt8500_write(port, 0x03, VT8500_URLCR); /* enable TX & RX */
311
312 return 0;
313 }
314
315 static void vt8500_shutdown(struct uart_port *port)
316 {
317 struct vt8500_port *vt8500_port =
318 container_of(port, struct vt8500_port, uart);
319
320 vt8500_port->ier = 0;
321
322 /* disable interrupts and FIFOs */
323 vt8500_write(&vt8500_port->uart, 0, VT8500_URIER);
324 vt8500_write(&vt8500_port->uart, 0x880, VT8500_URFCR);
325 free_irq(port->irq, port);
326 }
327
328 static void vt8500_set_termios(struct uart_port *port,
329 struct ktermios *termios,
330 struct ktermios *old)
331 {
332 struct vt8500_port *vt8500_port =
333 container_of(port, struct vt8500_port, uart);
334 unsigned long flags;
335 unsigned int baud, lcr;
336 unsigned int loops = 1000;
337
338 spin_lock_irqsave(&port->lock, flags);
339
340 /* calculate and set baud rate */
341 baud = uart_get_baud_rate(port, termios, old, 900, 921600);
342 baud = vt8500_set_baud_rate(port, baud);
343 if (tty_termios_baud_rate(termios))
344 tty_termios_encode_baud_rate(termios, baud, baud);
345
346 /* calculate parity */
347 lcr = vt8500_read(&vt8500_port->uart, VT8500_URLCR);
348 lcr &= ~((1 << 5) | (1 << 4));
349 if (termios->c_cflag & PARENB) {
350 lcr |= (1 << 4);
351 termios->c_cflag &= ~CMSPAR;
352 if (termios->c_cflag & PARODD)
353 lcr |= (1 << 5);
354 }
355
356 /* calculate bits per char */
357 lcr &= ~(1 << 2);
358 switch (termios->c_cflag & CSIZE) {
359 case CS7:
360 break;
361 case CS8:
362 default:
363 lcr |= (1 << 2);
364 termios->c_cflag &= ~CSIZE;
365 termios->c_cflag |= CS8;
366 break;
367 }
368
369 /* calculate stop bits */
370 lcr &= ~(1 << 3);
371 if (termios->c_cflag & CSTOPB)
372 lcr |= (1 << 3);
373
374 /* set parity, bits per char, and stop bit */
375 vt8500_write(&vt8500_port->uart, lcr, VT8500_URLCR);
376
377 /* Configure status bits to ignore based on termio flags. */
378 port->read_status_mask = 0;
379 if (termios->c_iflag & IGNPAR)
380 port->read_status_mask = FER | PER;
381
382 uart_update_timeout(port, termios->c_cflag, baud);
383
384 /* Reset FIFOs */
385 vt8500_write(&vt8500_port->uart, 0x88c, VT8500_URFCR);
386 while ((vt8500_read(&vt8500_port->uart, VT8500_URFCR) & 0xc)
387 && --loops)
388 cpu_relax();
389
390 /* Every possible FIFO-related interrupt */
391 vt8500_port->ier = RX_FIFO_INTS | TX_FIFO_INTS;
392
393 /*
394 * CTS flow control
395 */
396 if (UART_ENABLE_MS(&vt8500_port->uart, termios->c_cflag))
397 vt8500_port->ier |= TCTS;
398
399 vt8500_write(&vt8500_port->uart, 0x881, VT8500_URFCR);
400 vt8500_write(&vt8500_port->uart, vt8500_port->ier, VT8500_URIER);
401
402 spin_unlock_irqrestore(&port->lock, flags);
403 }
404
405 static const char *vt8500_type(struct uart_port *port)
406 {
407 struct vt8500_port *vt8500_port =
408 container_of(port, struct vt8500_port, uart);
409 return vt8500_port->name;
410 }
411
412 static void vt8500_release_port(struct uart_port *port)
413 {
414 }
415
416 static int vt8500_request_port(struct uart_port *port)
417 {
418 return 0;
419 }
420
421 static void vt8500_config_port(struct uart_port *port, int flags)
422 {
423 port->type = PORT_VT8500;
424 }
425
426 static int vt8500_verify_port(struct uart_port *port,
427 struct serial_struct *ser)
428 {
429 if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_VT8500))
430 return -EINVAL;
431 if (unlikely(port->irq != ser->irq))
432 return -EINVAL;
433 return 0;
434 }
435
436 static struct vt8500_port *vt8500_uart_ports[4];
437 static struct uart_driver vt8500_uart_driver;
438
439 #ifdef CONFIG_SERIAL_VT8500_CONSOLE
440
441 static inline void wait_for_xmitr(struct uart_port *port)
442 {
443 unsigned int status, tmout = 10000;
444
445 /* Wait up to 10ms for the character(s) to be sent. */
446 do {
447 status = vt8500_read(port, VT8500_URFIDX);
448
449 if (--tmout == 0)
450 break;
451 udelay(1);
452 } while (status & 0x10);
453 }
454
455 static void vt8500_console_putchar(struct uart_port *port, int c)
456 {
457 wait_for_xmitr(port);
458 writeb(c, port->membase + VT8500_TXFIFO);
459 }
460
461 static void vt8500_console_write(struct console *co, const char *s,
462 unsigned int count)
463 {
464 struct vt8500_port *vt8500_port = vt8500_uart_ports[co->index];
465 unsigned long ier;
466
467 BUG_ON(co->index < 0 || co->index >= vt8500_uart_driver.nr);
468
469 ier = vt8500_read(&vt8500_port->uart, VT8500_URIER);
470 vt8500_write(&vt8500_port->uart, VT8500_URIER, 0);
471
472 uart_console_write(&vt8500_port->uart, s, count,
473 vt8500_console_putchar);
474
475 /*
476 * Finally, wait for transmitter to become empty
477 * and switch back to FIFO
478 */
479 wait_for_xmitr(&vt8500_port->uart);
480 vt8500_write(&vt8500_port->uart, VT8500_URIER, ier);
481 }
482
483 static int __init vt8500_console_setup(struct console *co, char *options)
484 {
485 struct vt8500_port *vt8500_port;
486 int baud = 9600;
487 int bits = 8;
488 int parity = 'n';
489 int flow = 'n';
490
491 if (unlikely(co->index >= vt8500_uart_driver.nr || co->index < 0))
492 return -ENXIO;
493
494 vt8500_port = vt8500_uart_ports[co->index];
495
496 if (!vt8500_port)
497 return -ENODEV;
498
499 if (options)
500 uart_parse_options(options, &baud, &parity, &bits, &flow);
501
502 return uart_set_options(&vt8500_port->uart,
503 co, baud, parity, bits, flow);
504 }
505
506 static struct console vt8500_console = {
507 .name = "ttyWMT",
508 .write = vt8500_console_write,
509 .device = uart_console_device,
510 .setup = vt8500_console_setup,
511 .flags = CON_PRINTBUFFER,
512 .index = -1,
513 .data = &vt8500_uart_driver,
514 };
515
516 #define VT8500_CONSOLE (&vt8500_console)
517
518 #else
519 #define VT8500_CONSOLE NULL
520 #endif
521
522 static struct uart_ops vt8500_uart_pops = {
523 .tx_empty = vt8500_tx_empty,
524 .set_mctrl = vt8500_set_mctrl,
525 .get_mctrl = vt8500_get_mctrl,
526 .stop_tx = vt8500_stop_tx,
527 .start_tx = vt8500_start_tx,
528 .stop_rx = vt8500_stop_rx,
529 .enable_ms = vt8500_enable_ms,
530 .break_ctl = vt8500_break_ctl,
531 .startup = vt8500_startup,
532 .shutdown = vt8500_shutdown,
533 .set_termios = vt8500_set_termios,
534 .type = vt8500_type,
535 .release_port = vt8500_release_port,
536 .request_port = vt8500_request_port,
537 .config_port = vt8500_config_port,
538 .verify_port = vt8500_verify_port,
539 };
540
541 static struct uart_driver vt8500_uart_driver = {
542 .owner = THIS_MODULE,
543 .driver_name = "vt8500_serial",
544 .dev_name = "ttyWMT",
545 .nr = 6,
546 .cons = VT8500_CONSOLE,
547 };
548
549 static int __init vt8500_serial_probe(struct platform_device *pdev)
550 {
551 struct vt8500_port *vt8500_port;
552 struct resource *mmres, *irqres;
553 int ret;
554
555 mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
556 irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
557 if (!mmres || !irqres)
558 return -ENODEV;
559
560 vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL);
561 if (!vt8500_port)
562 return -ENOMEM;
563
564 vt8500_port->uart.type = PORT_VT8500;
565 vt8500_port->uart.iotype = UPIO_MEM;
566 vt8500_port->uart.mapbase = mmres->start;
567 vt8500_port->uart.irq = irqres->start;
568 vt8500_port->uart.fifosize = 16;
569 vt8500_port->uart.ops = &vt8500_uart_pops;
570 vt8500_port->uart.line = pdev->id;
571 vt8500_port->uart.dev = &pdev->dev;
572 vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
573 vt8500_port->uart.uartclk = 24000000;
574
575 snprintf(vt8500_port->name, sizeof(vt8500_port->name),
576 "VT8500 UART%d", pdev->id);
577
578 vt8500_port->uart.membase = ioremap(mmres->start,
579 mmres->end - mmres->start + 1);
580 if (!vt8500_port->uart.membase) {
581 ret = -ENOMEM;
582 goto err;
583 }
584
585 vt8500_uart_ports[pdev->id] = vt8500_port;
586
587 uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart);
588
589 platform_set_drvdata(pdev, vt8500_port);
590
591 return 0;
592
593 err:
594 kfree(vt8500_port);
595 return ret;
596 }
597
598 static int __devexit vt8500_serial_remove(struct platform_device *pdev)
599 {
600 struct vt8500_port *vt8500_port = platform_get_drvdata(pdev);
601
602 platform_set_drvdata(pdev, NULL);
603 uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart);
604 kfree(vt8500_port);
605
606 return 0;
607 }
608
609 static struct platform_driver vt8500_platform_driver = {
610 .probe = vt8500_serial_probe,
611 .remove = vt8500_serial_remove,
612 .driver = {
613 .name = "vt8500_serial",
614 .owner = THIS_MODULE,
615 },
616 };
617
618 static int __init vt8500_serial_init(void)
619 {
620 int ret;
621
622 ret = uart_register_driver(&vt8500_uart_driver);
623 if (unlikely(ret))
624 return ret;
625
626 ret = platform_driver_register(&vt8500_platform_driver);
627
628 if (unlikely(ret))
629 uart_unregister_driver(&vt8500_uart_driver);
630
631 return ret;
632 }
633
634 static void __exit vt8500_serial_exit(void)
635 {
636 #ifdef CONFIG_SERIAL_VT8500_CONSOLE
637 unregister_console(&vt8500_console);
638 #endif
639 platform_driver_unregister(&vt8500_platform_driver);
640 uart_unregister_driver(&vt8500_uart_driver);
641 }
642
643 module_init(vt8500_serial_init);
644 module_exit(vt8500_serial_exit);
645
646 MODULE_AUTHOR("Alexey Charkov <alchark@gmail.com>");
647 MODULE_DESCRIPTION("Driver for vt8500 serial device");
648 MODULE_LICENSE("GPL");
Linux with added FPC-III support