net: dsa: b53: Fix ARL register definitions
[linux/fpc-iii.git] / drivers / watchdog / intel_scu_watchdog.c
blob0caab6241eb77a84bd2911dbaa011be68498fd85
1 /*
2 * Intel_SCU 0.2: An Intel SCU IOH Based Watchdog Device
3 * for Intel part #(s):
4 * - AF82MP20 PCH
6 * Copyright (C) 2009-2010 Intel Corporation. All rights reserved.
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of version 2 of the GNU General
10 * Public License as published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be
13 * useful, but WITHOUT ANY WARRANTY; without even the implied
14 * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
15 * PURPOSE. See the GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public
17 * License along with this program; if not, write to the Free
18 * Software Foundation, Inc., 59 Temple Place - Suite 330,
19 * Boston, MA 02111-1307, USA.
20 * The full GNU General Public License is included in this
21 * distribution in the file called COPYING.
25 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
27 #include <linux/compiler.h>
28 #include <linux/module.h>
29 #include <linux/kernel.h>
30 #include <linux/moduleparam.h>
31 #include <linux/types.h>
32 #include <linux/miscdevice.h>
33 #include <linux/watchdog.h>
34 #include <linux/fs.h>
35 #include <linux/notifier.h>
36 #include <linux/reboot.h>
37 #include <linux/init.h>
38 #include <linux/jiffies.h>
39 #include <linux/uaccess.h>
40 #include <linux/slab.h>
41 #include <linux/io.h>
42 #include <linux/interrupt.h>
43 #include <linux/delay.h>
44 #include <linux/sched.h>
45 #include <linux/signal.h>
46 #include <linux/sfi.h>
47 #include <asm/irq.h>
48 #include <linux/atomic.h>
49 #include <asm/intel_scu_ipc.h>
50 #include <asm/apb_timer.h>
51 #include <asm/intel-mid.h>
53 #include "intel_scu_watchdog.h"
55 /* Bounds number of times we will retry loading time count */
56 /* This retry is a work around for a silicon bug. */
57 #define MAX_RETRY 16
59 #define IPC_SET_WATCHDOG_TIMER 0xF8
61 static int timer_margin = DEFAULT_SOFT_TO_HARD_MARGIN;
62 module_param(timer_margin, int, 0);
63 MODULE_PARM_DESC(timer_margin,
64 "Watchdog timer margin"
65 "Time between interrupt and resetting the system"
66 "The range is from 1 to 160"
67 "This is the time for all keep alives to arrive");
69 static int timer_set = DEFAULT_TIME;
70 module_param(timer_set, int, 0);
71 MODULE_PARM_DESC(timer_set,
72 "Default Watchdog timer setting"
73 "Complete cycle time"
74 "The range is from 1 to 170"
75 "This is the time for all keep alives to arrive");
77 /* After watchdog device is closed, check force_boot. If:
78 * force_boot == 0, then force boot on next watchdog interrupt after close,
79 * force_boot == 1, then force boot immediately when device is closed.
81 static int force_boot;
82 module_param(force_boot, int, 0);
83 MODULE_PARM_DESC(force_boot,
84 "A value of 1 means that the driver will reboot"
85 "the system immediately if the /dev/watchdog device is closed"
86 "A value of 0 means that when /dev/watchdog device is closed"
87 "the watchdog timer will be refreshed for one more interval"
88 "of length: timer_set. At the end of this interval, the"
89 "watchdog timer will reset the system."
92 /* there is only one device in the system now; this can be made into
93 * an array in the future if we have more than one device */
95 static struct intel_scu_watchdog_dev watchdog_device;
97 /* Forces restart, if force_reboot is set */
98 static void watchdog_fire(void)
100 if (force_boot) {
101 pr_crit("Initiating system reboot\n");
102 emergency_restart();
103 pr_crit("Reboot didn't ?????\n");
106 else {
107 pr_crit("Immediate Reboot Disabled\n");
108 pr_crit("System will reset when watchdog timer times out!\n");
112 static int check_timer_margin(int new_margin)
114 if ((new_margin < MIN_TIME_CYCLE) ||
115 (new_margin > MAX_TIME - timer_set)) {
116 pr_debug("value of new_margin %d is out of the range %d to %d\n",
117 new_margin, MIN_TIME_CYCLE, MAX_TIME - timer_set);
118 return -EINVAL;
120 return 0;
124 * IPC operations
126 static int watchdog_set_ipc(int soft_threshold, int threshold)
128 u32 *ipc_wbuf;
129 u8 cbuf[16] = { '\0' };
130 int ipc_ret = 0;
132 ipc_wbuf = (u32 *)&cbuf;
133 ipc_wbuf[0] = soft_threshold;
134 ipc_wbuf[1] = threshold;
136 ipc_ret = intel_scu_ipc_command(
137 IPC_SET_WATCHDOG_TIMER,
139 ipc_wbuf,
141 NULL,
144 if (ipc_ret != 0)
145 pr_err("Error setting SCU watchdog timer: %x\n", ipc_ret);
147 return ipc_ret;
151 * Intel_SCU operations
154 /* timer interrupt handler */
155 static irqreturn_t watchdog_timer_interrupt(int irq, void *dev_id)
157 int int_status;
158 int_status = ioread32(watchdog_device.timer_interrupt_status_addr);
160 pr_debug("irq, int_status: %x\n", int_status);
162 if (int_status != 0)
163 return IRQ_NONE;
165 /* has the timer been started? If not, then this is spurious */
166 if (watchdog_device.timer_started == 0) {
167 pr_debug("spurious interrupt received\n");
168 return IRQ_HANDLED;
171 /* temporarily disable the timer */
172 iowrite32(0x00000002, watchdog_device.timer_control_addr);
174 /* set the timer to the threshold */
175 iowrite32(watchdog_device.threshold,
176 watchdog_device.timer_load_count_addr);
178 /* allow the timer to run */
179 iowrite32(0x00000003, watchdog_device.timer_control_addr);
181 return IRQ_HANDLED;
184 static int intel_scu_keepalive(void)
187 /* read eoi register - clears interrupt */
188 ioread32(watchdog_device.timer_clear_interrupt_addr);
190 /* temporarily disable the timer */
191 iowrite32(0x00000002, watchdog_device.timer_control_addr);
193 /* set the timer to the soft_threshold */
194 iowrite32(watchdog_device.soft_threshold,
195 watchdog_device.timer_load_count_addr);
197 /* allow the timer to run */
198 iowrite32(0x00000003, watchdog_device.timer_control_addr);
200 return 0;
203 static int intel_scu_stop(void)
205 iowrite32(0, watchdog_device.timer_control_addr);
206 return 0;
209 static int intel_scu_set_heartbeat(u32 t)
211 int ipc_ret;
212 int retry_count;
213 u32 soft_value;
214 u32 hw_value;
216 watchdog_device.timer_set = t;
217 watchdog_device.threshold =
218 timer_margin * watchdog_device.timer_tbl_ptr->freq_hz;
219 watchdog_device.soft_threshold =
220 (watchdog_device.timer_set - timer_margin)
221 * watchdog_device.timer_tbl_ptr->freq_hz;
223 pr_debug("set_heartbeat: timer freq is %d\n",
224 watchdog_device.timer_tbl_ptr->freq_hz);
225 pr_debug("set_heartbeat: timer_set is %x (hex)\n",
226 watchdog_device.timer_set);
227 pr_debug("set_hearbeat: timer_margin is %x (hex)\n", timer_margin);
228 pr_debug("set_heartbeat: threshold is %x (hex)\n",
229 watchdog_device.threshold);
230 pr_debug("set_heartbeat: soft_threshold is %x (hex)\n",
231 watchdog_device.soft_threshold);
233 /* Adjust thresholds by FREQ_ADJUSTMENT factor, to make the */
234 /* watchdog timing come out right. */
235 watchdog_device.threshold =
236 watchdog_device.threshold / FREQ_ADJUSTMENT;
237 watchdog_device.soft_threshold =
238 watchdog_device.soft_threshold / FREQ_ADJUSTMENT;
240 /* temporarily disable the timer */
241 iowrite32(0x00000002, watchdog_device.timer_control_addr);
243 /* send the threshold and soft_threshold via IPC to the processor */
244 ipc_ret = watchdog_set_ipc(watchdog_device.soft_threshold,
245 watchdog_device.threshold);
247 if (ipc_ret != 0) {
248 /* Make sure the watchdog timer is stopped */
249 intel_scu_stop();
250 return ipc_ret;
253 /* Soft Threshold set loop. Early versions of silicon did */
254 /* not always set this count correctly. This loop checks */
255 /* the value and retries if it was not set correctly. */
257 retry_count = 0;
258 soft_value = watchdog_device.soft_threshold & 0xFFFF0000;
259 do {
261 /* Make sure timer is stopped */
262 intel_scu_stop();
264 if (MAX_RETRY < retry_count++) {
265 /* Unable to set timer value */
266 pr_err("Unable to set timer\n");
267 return -ENODEV;
270 /* set the timer to the soft threshold */
271 iowrite32(watchdog_device.soft_threshold,
272 watchdog_device.timer_load_count_addr);
274 /* read count value before starting timer */
275 ioread32(watchdog_device.timer_load_count_addr);
277 /* Start the timer */
278 iowrite32(0x00000003, watchdog_device.timer_control_addr);
280 /* read the value the time loaded into its count reg */
281 hw_value = ioread32(watchdog_device.timer_load_count_addr);
282 hw_value = hw_value & 0xFFFF0000;
285 } while (soft_value != hw_value);
287 watchdog_device.timer_started = 1;
289 return 0;
293 * /dev/watchdog handling
296 static int intel_scu_open(struct inode *inode, struct file *file)
299 /* Set flag to indicate that watchdog device is open */
300 if (test_and_set_bit(0, &watchdog_device.driver_open))
301 return -EBUSY;
303 /* Check for reopen of driver. Reopens are not allowed */
304 if (watchdog_device.driver_closed)
305 return -EPERM;
307 return nonseekable_open(inode, file);
310 static int intel_scu_release(struct inode *inode, struct file *file)
313 * This watchdog should not be closed, after the timer
314 * is started with the WDIPC_SETTIMEOUT ioctl
315 * If force_boot is set watchdog_fire() will cause an
316 * immediate reset. If force_boot is not set, the watchdog
317 * timer is refreshed for one more interval. At the end
318 * of that interval, the watchdog timer will reset the system.
321 if (!test_and_clear_bit(0, &watchdog_device.driver_open)) {
322 pr_debug("intel_scu_release, without open\n");
323 return -ENOTTY;
326 if (!watchdog_device.timer_started) {
327 /* Just close, since timer has not been started */
328 pr_debug("closed, without starting timer\n");
329 return 0;
332 pr_crit("Unexpected close of /dev/watchdog!\n");
334 /* Since the timer was started, prevent future reopens */
335 watchdog_device.driver_closed = 1;
337 /* Refresh the timer for one more interval */
338 intel_scu_keepalive();
340 /* Reboot system (if force_boot is set) */
341 watchdog_fire();
343 /* We should only reach this point if force_boot is not set */
344 return 0;
347 static ssize_t intel_scu_write(struct file *file,
348 char const *data,
349 size_t len,
350 loff_t *ppos)
353 if (watchdog_device.timer_started)
354 /* Watchdog already started, keep it alive */
355 intel_scu_keepalive();
356 else
357 /* Start watchdog with timer value set by init */
358 intel_scu_set_heartbeat(watchdog_device.timer_set);
360 return len;
363 static long intel_scu_ioctl(struct file *file,
364 unsigned int cmd,
365 unsigned long arg)
367 void __user *argp = (void __user *)arg;
368 u32 __user *p = argp;
369 u32 new_margin;
372 static const struct watchdog_info ident = {
373 .options = WDIOF_SETTIMEOUT
374 | WDIOF_KEEPALIVEPING,
375 .firmware_version = 0, /* @todo Get from SCU via
376 ipc_get_scu_fw_version()? */
377 .identity = "Intel_SCU IOH Watchdog" /* len < 32 */
380 switch (cmd) {
381 case WDIOC_GETSUPPORT:
382 return copy_to_user(argp,
383 &ident,
384 sizeof(ident)) ? -EFAULT : 0;
385 case WDIOC_GETSTATUS:
386 case WDIOC_GETBOOTSTATUS:
387 return put_user(0, p);
388 case WDIOC_KEEPALIVE:
389 intel_scu_keepalive();
391 return 0;
392 case WDIOC_SETTIMEOUT:
393 if (get_user(new_margin, p))
394 return -EFAULT;
396 if (check_timer_margin(new_margin))
397 return -EINVAL;
399 if (intel_scu_set_heartbeat(new_margin))
400 return -EINVAL;
401 return 0;
402 case WDIOC_GETTIMEOUT:
403 return put_user(watchdog_device.soft_threshold, p);
405 default:
406 return -ENOTTY;
411 * Notifier for system down
413 static int intel_scu_notify_sys(struct notifier_block *this,
414 unsigned long code,
415 void *another_unused)
417 if (code == SYS_DOWN || code == SYS_HALT)
418 /* Turn off the watchdog timer. */
419 intel_scu_stop();
420 return NOTIFY_DONE;
424 * Kernel Interfaces
426 static const struct file_operations intel_scu_fops = {
427 .owner = THIS_MODULE,
428 .llseek = no_llseek,
429 .write = intel_scu_write,
430 .unlocked_ioctl = intel_scu_ioctl,
431 .open = intel_scu_open,
432 .release = intel_scu_release,
435 static int __init intel_scu_watchdog_init(void)
437 int ret;
438 u32 __iomem *tmp_addr;
441 * We don't really need to check this as the SFI timer get will fail
442 * but if we do so we can exit with a clearer reason and no noise.
444 * If it isn't an intel MID device then it doesn't have this watchdog
446 if (!intel_mid_identify_cpu())
447 return -ENODEV;
449 /* Check boot parameters to verify that their initial values */
450 /* are in range. */
451 /* Check value of timer_set boot parameter */
452 if ((timer_set < MIN_TIME_CYCLE) ||
453 (timer_set > MAX_TIME - MIN_TIME_CYCLE)) {
454 pr_err("value of timer_set %x (hex) is out of range from %x to %x (hex)\n",
455 timer_set, MIN_TIME_CYCLE, MAX_TIME - MIN_TIME_CYCLE);
456 return -EINVAL;
459 /* Check value of timer_margin boot parameter */
460 if (check_timer_margin(timer_margin))
461 return -EINVAL;
463 watchdog_device.timer_tbl_ptr = sfi_get_mtmr(sfi_mtimer_num-1);
465 if (watchdog_device.timer_tbl_ptr == NULL) {
466 pr_debug("timer is not available\n");
467 return -ENODEV;
469 /* make sure the timer exists */
470 if (watchdog_device.timer_tbl_ptr->phys_addr == 0) {
471 pr_debug("timer %d does not have valid physical memory\n",
472 sfi_mtimer_num);
473 return -ENODEV;
476 if (watchdog_device.timer_tbl_ptr->irq == 0) {
477 pr_debug("timer %d invalid irq\n", sfi_mtimer_num);
478 return -ENODEV;
481 tmp_addr = ioremap_nocache(watchdog_device.timer_tbl_ptr->phys_addr,
482 20);
484 if (tmp_addr == NULL) {
485 pr_debug("timer unable to ioremap\n");
486 return -ENOMEM;
489 watchdog_device.timer_load_count_addr = tmp_addr++;
490 watchdog_device.timer_current_value_addr = tmp_addr++;
491 watchdog_device.timer_control_addr = tmp_addr++;
492 watchdog_device.timer_clear_interrupt_addr = tmp_addr++;
493 watchdog_device.timer_interrupt_status_addr = tmp_addr++;
495 /* Set the default time values in device structure */
497 watchdog_device.timer_set = timer_set;
498 watchdog_device.threshold =
499 timer_margin * watchdog_device.timer_tbl_ptr->freq_hz;
500 watchdog_device.soft_threshold =
501 (watchdog_device.timer_set - timer_margin)
502 * watchdog_device.timer_tbl_ptr->freq_hz;
505 watchdog_device.intel_scu_notifier.notifier_call =
506 intel_scu_notify_sys;
508 ret = register_reboot_notifier(&watchdog_device.intel_scu_notifier);
509 if (ret) {
510 pr_err("cannot register notifier %d)\n", ret);
511 goto register_reboot_error;
514 watchdog_device.miscdev.minor = WATCHDOG_MINOR;
515 watchdog_device.miscdev.name = "watchdog";
516 watchdog_device.miscdev.fops = &intel_scu_fops;
518 ret = misc_register(&watchdog_device.miscdev);
519 if (ret) {
520 pr_err("cannot register miscdev %d err =%d\n",
521 WATCHDOG_MINOR, ret);
522 goto misc_register_error;
525 ret = request_irq((unsigned int)watchdog_device.timer_tbl_ptr->irq,
526 watchdog_timer_interrupt,
527 IRQF_SHARED, "watchdog",
528 &watchdog_device.timer_load_count_addr);
529 if (ret) {
530 pr_err("error requesting irq %d\n", ret);
531 goto request_irq_error;
533 /* Make sure timer is disabled before returning */
534 intel_scu_stop();
535 return 0;
537 /* error cleanup */
539 request_irq_error:
540 misc_deregister(&watchdog_device.miscdev);
541 misc_register_error:
542 unregister_reboot_notifier(&watchdog_device.intel_scu_notifier);
543 register_reboot_error:
544 intel_scu_stop();
545 iounmap(watchdog_device.timer_load_count_addr);
546 return ret;
549 static void __exit intel_scu_watchdog_exit(void)
552 misc_deregister(&watchdog_device.miscdev);
553 unregister_reboot_notifier(&watchdog_device.intel_scu_notifier);
554 /* disable the timer */
555 iowrite32(0x00000002, watchdog_device.timer_control_addr);
556 iounmap(watchdog_device.timer_load_count_addr);
559 late_initcall(intel_scu_watchdog_init);
560 module_exit(intel_scu_watchdog_exit);
562 MODULE_AUTHOR("Intel Corporation");
563 MODULE_DESCRIPTION("Intel SCU Watchdog Device Driver");
564 MODULE_LICENSE("GPL");
565 MODULE_VERSION(WDT_VER);