eeprom: at24: fix reading from 24MAC402/24MAC602
[linux/fpc-iii.git] / drivers / net / can / sun4i_can.c
blob1ac2090a17216cf47e74be35994fbd4a5e267f6f
1 /*
2 * sun4i_can.c - CAN bus controller driver for Allwinner SUN4I&SUN7I based SoCs
4 * Copyright (C) 2013 Peter Chen
5 * Copyright (C) 2015 Gerhard Bertelsmann
6 * All rights reserved.
8 * Parts of this software are based on (derived from) the SJA1000 code by:
9 * Copyright (C) 2014 Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
10 * Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
11 * Copyright (C) 2002-2007 Volkswagen Group Electronic Research
12 * Copyright (C) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
13 * 38106 Braunschweig, GERMANY
15 * Redistribution and use in source and binary forms, with or without
16 * modification, are permitted provided that the following conditions
17 * are met:
18 * 1. Redistributions of source code must retain the above copyright
19 * notice, this list of conditions and the following disclaimer.
20 * 2. Redistributions in binary form must reproduce the above copyright
21 * notice, this list of conditions and the following disclaimer in the
22 * documentation and/or other materials provided with the distribution.
23 * 3. Neither the name of Volkswagen nor the names of its contributors
24 * may be used to endorse or promote products derived from this software
25 * without specific prior written permission.
27 * Alternatively, provided that this notice is retained in full, this
28 * software may be distributed under the terms of the GNU General
29 * Public License ("GPL") version 2, in which case the provisions of the
30 * GPL apply INSTEAD OF those given above.
32 * The provided data structures and external interfaces from this code
33 * are not restricted to be used by modules with a GPL compatible license.
35 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
36 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
37 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
38 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
39 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
40 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
41 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
42 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
43 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
44 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
45 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
46 * DAMAGE.
50 #include <linux/netdevice.h>
51 #include <linux/can.h>
52 #include <linux/can/dev.h>
53 #include <linux/can/error.h>
54 #include <linux/can/led.h>
55 #include <linux/clk.h>
56 #include <linux/delay.h>
57 #include <linux/interrupt.h>
58 #include <linux/init.h>
59 #include <linux/io.h>
60 #include <linux/module.h>
61 #include <linux/of.h>
62 #include <linux/of_device.h>
63 #include <linux/platform_device.h>
65 #define DRV_NAME "sun4i_can"
67 /* Registers address (physical base address 0x01C2BC00) */
68 #define SUN4I_REG_MSEL_ADDR 0x0000 /* CAN Mode Select */
69 #define SUN4I_REG_CMD_ADDR 0x0004 /* CAN Command */
70 #define SUN4I_REG_STA_ADDR 0x0008 /* CAN Status */
71 #define SUN4I_REG_INT_ADDR 0x000c /* CAN Interrupt Flag */
72 #define SUN4I_REG_INTEN_ADDR 0x0010 /* CAN Interrupt Enable */
73 #define SUN4I_REG_BTIME_ADDR 0x0014 /* CAN Bus Timing 0 */
74 #define SUN4I_REG_TEWL_ADDR 0x0018 /* CAN Tx Error Warning Limit */
75 #define SUN4I_REG_ERRC_ADDR 0x001c /* CAN Error Counter */
76 #define SUN4I_REG_RMCNT_ADDR 0x0020 /* CAN Receive Message Counter */
77 #define SUN4I_REG_RBUFSA_ADDR 0x0024 /* CAN Receive Buffer Start Address */
78 #define SUN4I_REG_BUF0_ADDR 0x0040 /* CAN Tx/Rx Buffer 0 */
79 #define SUN4I_REG_BUF1_ADDR 0x0044 /* CAN Tx/Rx Buffer 1 */
80 #define SUN4I_REG_BUF2_ADDR 0x0048 /* CAN Tx/Rx Buffer 2 */
81 #define SUN4I_REG_BUF3_ADDR 0x004c /* CAN Tx/Rx Buffer 3 */
82 #define SUN4I_REG_BUF4_ADDR 0x0050 /* CAN Tx/Rx Buffer 4 */
83 #define SUN4I_REG_BUF5_ADDR 0x0054 /* CAN Tx/Rx Buffer 5 */
84 #define SUN4I_REG_BUF6_ADDR 0x0058 /* CAN Tx/Rx Buffer 6 */
85 #define SUN4I_REG_BUF7_ADDR 0x005c /* CAN Tx/Rx Buffer 7 */
86 #define SUN4I_REG_BUF8_ADDR 0x0060 /* CAN Tx/Rx Buffer 8 */
87 #define SUN4I_REG_BUF9_ADDR 0x0064 /* CAN Tx/Rx Buffer 9 */
88 #define SUN4I_REG_BUF10_ADDR 0x0068 /* CAN Tx/Rx Buffer 10 */
89 #define SUN4I_REG_BUF11_ADDR 0x006c /* CAN Tx/Rx Buffer 11 */
90 #define SUN4I_REG_BUF12_ADDR 0x0070 /* CAN Tx/Rx Buffer 12 */
91 #define SUN4I_REG_ACPC_ADDR 0x0040 /* CAN Acceptance Code 0 */
92 #define SUN4I_REG_ACPM_ADDR 0x0044 /* CAN Acceptance Mask 0 */
93 #define SUN4I_REG_RBUF_RBACK_START_ADDR 0x0180 /* CAN transmit buffer start */
94 #define SUN4I_REG_RBUF_RBACK_END_ADDR 0x01b0 /* CAN transmit buffer end */
96 /* Controller Register Description */
98 /* mode select register (r/w)
99 * offset:0x0000 default:0x0000_0001
101 #define SUN4I_MSEL_SLEEP_MODE (0x01 << 4) /* write in reset mode */
102 #define SUN4I_MSEL_WAKE_UP (0x00 << 4)
103 #define SUN4I_MSEL_SINGLE_FILTER (0x01 << 3) /* write in reset mode */
104 #define SUN4I_MSEL_DUAL_FILTERS (0x00 << 3)
105 #define SUN4I_MSEL_LOOPBACK_MODE BIT(2)
106 #define SUN4I_MSEL_LISTEN_ONLY_MODE BIT(1)
107 #define SUN4I_MSEL_RESET_MODE BIT(0)
109 /* command register (w)
110 * offset:0x0004 default:0x0000_0000
112 #define SUN4I_CMD_BUS_OFF_REQ BIT(5)
113 #define SUN4I_CMD_SELF_RCV_REQ BIT(4)
114 #define SUN4I_CMD_CLEAR_OR_FLAG BIT(3)
115 #define SUN4I_CMD_RELEASE_RBUF BIT(2)
116 #define SUN4I_CMD_ABORT_REQ BIT(1)
117 #define SUN4I_CMD_TRANS_REQ BIT(0)
119 /* status register (r)
120 * offset:0x0008 default:0x0000_003c
122 #define SUN4I_STA_BIT_ERR (0x00 << 22)
123 #define SUN4I_STA_FORM_ERR (0x01 << 22)
124 #define SUN4I_STA_STUFF_ERR (0x02 << 22)
125 #define SUN4I_STA_OTHER_ERR (0x03 << 22)
126 #define SUN4I_STA_MASK_ERR (0x03 << 22)
127 #define SUN4I_STA_ERR_DIR BIT(21)
128 #define SUN4I_STA_ERR_SEG_CODE (0x1f << 16)
129 #define SUN4I_STA_START (0x03 << 16)
130 #define SUN4I_STA_ID28_21 (0x02 << 16)
131 #define SUN4I_STA_ID20_18 (0x06 << 16)
132 #define SUN4I_STA_SRTR (0x04 << 16)
133 #define SUN4I_STA_IDE (0x05 << 16)
134 #define SUN4I_STA_ID17_13 (0x07 << 16)
135 #define SUN4I_STA_ID12_5 (0x0f << 16)
136 #define SUN4I_STA_ID4_0 (0x0e << 16)
137 #define SUN4I_STA_RTR (0x0c << 16)
138 #define SUN4I_STA_RB1 (0x0d << 16)
139 #define SUN4I_STA_RB0 (0x09 << 16)
140 #define SUN4I_STA_DLEN (0x0b << 16)
141 #define SUN4I_STA_DATA_FIELD (0x0a << 16)
142 #define SUN4I_STA_CRC_SEQUENCE (0x08 << 16)
143 #define SUN4I_STA_CRC_DELIMITER (0x18 << 16)
144 #define SUN4I_STA_ACK (0x19 << 16)
145 #define SUN4I_STA_ACK_DELIMITER (0x1b << 16)
146 #define SUN4I_STA_END (0x1a << 16)
147 #define SUN4I_STA_INTERMISSION (0x12 << 16)
148 #define SUN4I_STA_ACTIVE_ERROR (0x11 << 16)
149 #define SUN4I_STA_PASSIVE_ERROR (0x16 << 16)
150 #define SUN4I_STA_TOLERATE_DOMINANT_BITS (0x13 << 16)
151 #define SUN4I_STA_ERROR_DELIMITER (0x17 << 16)
152 #define SUN4I_STA_OVERLOAD (0x1c << 16)
153 #define SUN4I_STA_BUS_OFF BIT(7)
154 #define SUN4I_STA_ERR_STA BIT(6)
155 #define SUN4I_STA_TRANS_BUSY BIT(5)
156 #define SUN4I_STA_RCV_BUSY BIT(4)
157 #define SUN4I_STA_TRANS_OVER BIT(3)
158 #define SUN4I_STA_TBUF_RDY BIT(2)
159 #define SUN4I_STA_DATA_ORUN BIT(1)
160 #define SUN4I_STA_RBUF_RDY BIT(0)
162 /* interrupt register (r)
163 * offset:0x000c default:0x0000_0000
165 #define SUN4I_INT_BUS_ERR BIT(7)
166 #define SUN4I_INT_ARB_LOST BIT(6)
167 #define SUN4I_INT_ERR_PASSIVE BIT(5)
168 #define SUN4I_INT_WAKEUP BIT(4)
169 #define SUN4I_INT_DATA_OR BIT(3)
170 #define SUN4I_INT_ERR_WRN BIT(2)
171 #define SUN4I_INT_TBUF_VLD BIT(1)
172 #define SUN4I_INT_RBUF_VLD BIT(0)
174 /* interrupt enable register (r/w)
175 * offset:0x0010 default:0x0000_0000
177 #define SUN4I_INTEN_BERR BIT(7)
178 #define SUN4I_INTEN_ARB_LOST BIT(6)
179 #define SUN4I_INTEN_ERR_PASSIVE BIT(5)
180 #define SUN4I_INTEN_WAKEUP BIT(4)
181 #define SUN4I_INTEN_OR BIT(3)
182 #define SUN4I_INTEN_ERR_WRN BIT(2)
183 #define SUN4I_INTEN_TX BIT(1)
184 #define SUN4I_INTEN_RX BIT(0)
186 /* error code */
187 #define SUN4I_ERR_INRCV (0x1 << 5)
188 #define SUN4I_ERR_INTRANS (0x0 << 5)
190 /* filter mode */
191 #define SUN4I_FILTER_CLOSE 0
192 #define SUN4I_SINGLE_FLTER_MODE 1
193 #define SUN4I_DUAL_FILTER_MODE 2
195 /* message buffer flags */
196 #define SUN4I_MSG_EFF_FLAG BIT(7)
197 #define SUN4I_MSG_RTR_FLAG BIT(6)
199 /* max. number of interrupts handled in ISR */
200 #define SUN4I_CAN_MAX_IRQ 20
201 #define SUN4I_MODE_MAX_RETRIES 100
203 struct sun4ican_priv {
204 struct can_priv can;
205 void __iomem *base;
206 struct clk *clk;
207 spinlock_t cmdreg_lock; /* lock for concurrent cmd register writes */
210 static const struct can_bittiming_const sun4ican_bittiming_const = {
211 .name = DRV_NAME,
212 .tseg1_min = 1,
213 .tseg1_max = 16,
214 .tseg2_min = 1,
215 .tseg2_max = 8,
216 .sjw_max = 4,
217 .brp_min = 1,
218 .brp_max = 64,
219 .brp_inc = 1,
222 static void sun4i_can_write_cmdreg(struct sun4ican_priv *priv, u8 val)
224 unsigned long flags;
226 spin_lock_irqsave(&priv->cmdreg_lock, flags);
227 writel(val, priv->base + SUN4I_REG_CMD_ADDR);
228 spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
231 static int set_normal_mode(struct net_device *dev)
233 struct sun4ican_priv *priv = netdev_priv(dev);
234 int retry = SUN4I_MODE_MAX_RETRIES;
235 u32 mod_reg_val = 0;
237 do {
238 mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
239 mod_reg_val &= ~SUN4I_MSEL_RESET_MODE;
240 writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
241 } while (retry-- && (mod_reg_val & SUN4I_MSEL_RESET_MODE));
243 if (readl(priv->base + SUN4I_REG_MSEL_ADDR) & SUN4I_MSEL_RESET_MODE) {
244 netdev_err(dev,
245 "setting controller into normal mode failed!\n");
246 return -ETIMEDOUT;
249 return 0;
252 static int set_reset_mode(struct net_device *dev)
254 struct sun4ican_priv *priv = netdev_priv(dev);
255 int retry = SUN4I_MODE_MAX_RETRIES;
256 u32 mod_reg_val = 0;
258 do {
259 mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
260 mod_reg_val |= SUN4I_MSEL_RESET_MODE;
261 writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
262 } while (retry-- && !(mod_reg_val & SUN4I_MSEL_RESET_MODE));
264 if (!(readl(priv->base + SUN4I_REG_MSEL_ADDR) &
265 SUN4I_MSEL_RESET_MODE)) {
266 netdev_err(dev, "setting controller into reset mode failed!\n");
267 return -ETIMEDOUT;
270 return 0;
273 /* bittiming is called in reset_mode only */
274 static int sun4ican_set_bittiming(struct net_device *dev)
276 struct sun4ican_priv *priv = netdev_priv(dev);
277 struct can_bittiming *bt = &priv->can.bittiming;
278 u32 cfg;
280 cfg = ((bt->brp - 1) & 0x3FF) |
281 (((bt->sjw - 1) & 0x3) << 14) |
282 (((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) << 16) |
283 (((bt->phase_seg2 - 1) & 0x7) << 20);
284 if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
285 cfg |= 0x800000;
287 netdev_dbg(dev, "setting BITTIMING=0x%08x\n", cfg);
288 writel(cfg, priv->base + SUN4I_REG_BTIME_ADDR);
290 return 0;
293 static int sun4ican_get_berr_counter(const struct net_device *dev,
294 struct can_berr_counter *bec)
296 struct sun4ican_priv *priv = netdev_priv(dev);
297 u32 errors;
298 int err;
300 err = clk_prepare_enable(priv->clk);
301 if (err) {
302 netdev_err(dev, "could not enable clock\n");
303 return err;
306 errors = readl(priv->base + SUN4I_REG_ERRC_ADDR);
308 bec->txerr = errors & 0xFF;
309 bec->rxerr = (errors >> 16) & 0xFF;
311 clk_disable_unprepare(priv->clk);
313 return 0;
316 static int sun4i_can_start(struct net_device *dev)
318 struct sun4ican_priv *priv = netdev_priv(dev);
319 int err;
320 u32 mod_reg_val;
322 /* we need to enter the reset mode */
323 err = set_reset_mode(dev);
324 if (err) {
325 netdev_err(dev, "could not enter reset mode\n");
326 return err;
329 /* set filters - we accept all */
330 writel(0x00000000, priv->base + SUN4I_REG_ACPC_ADDR);
331 writel(0xFFFFFFFF, priv->base + SUN4I_REG_ACPM_ADDR);
333 /* clear error counters and error code capture */
334 writel(0, priv->base + SUN4I_REG_ERRC_ADDR);
336 /* enable interrupts */
337 if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
338 writel(0xFF, priv->base + SUN4I_REG_INTEN_ADDR);
339 else
340 writel(0xFF & ~SUN4I_INTEN_BERR,
341 priv->base + SUN4I_REG_INTEN_ADDR);
343 /* enter the selected mode */
344 mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
345 if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
346 mod_reg_val |= SUN4I_MSEL_LOOPBACK_MODE;
347 else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
348 mod_reg_val |= SUN4I_MSEL_LISTEN_ONLY_MODE;
349 writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
351 err = sun4ican_set_bittiming(dev);
352 if (err)
353 return err;
355 /* we are ready to enter the normal mode */
356 err = set_normal_mode(dev);
357 if (err) {
358 netdev_err(dev, "could not enter normal mode\n");
359 return err;
362 priv->can.state = CAN_STATE_ERROR_ACTIVE;
364 return 0;
367 static int sun4i_can_stop(struct net_device *dev)
369 struct sun4ican_priv *priv = netdev_priv(dev);
370 int err;
372 priv->can.state = CAN_STATE_STOPPED;
373 /* we need to enter reset mode */
374 err = set_reset_mode(dev);
375 if (err) {
376 netdev_err(dev, "could not enter reset mode\n");
377 return err;
380 /* disable all interrupts */
381 writel(0, priv->base + SUN4I_REG_INTEN_ADDR);
383 return 0;
386 static int sun4ican_set_mode(struct net_device *dev, enum can_mode mode)
388 int err;
390 switch (mode) {
391 case CAN_MODE_START:
392 err = sun4i_can_start(dev);
393 if (err) {
394 netdev_err(dev, "starting CAN controller failed!\n");
395 return err;
397 if (netif_queue_stopped(dev))
398 netif_wake_queue(dev);
399 break;
401 default:
402 return -EOPNOTSUPP;
404 return 0;
407 /* transmit a CAN message
408 * message layout in the sk_buff should be like this:
409 * xx xx xx xx ff ll 00 11 22 33 44 55 66 77
410 * [ can_id ] [flags] [len] [can data (up to 8 bytes]
412 static int sun4ican_start_xmit(struct sk_buff *skb, struct net_device *dev)
414 struct sun4ican_priv *priv = netdev_priv(dev);
415 struct can_frame *cf = (struct can_frame *)skb->data;
416 u8 dlc;
417 u32 dreg, msg_flag_n;
418 canid_t id;
419 int i;
421 if (can_dropped_invalid_skb(dev, skb))
422 return NETDEV_TX_OK;
424 netif_stop_queue(dev);
426 id = cf->can_id;
427 dlc = cf->can_dlc;
428 msg_flag_n = dlc;
430 if (id & CAN_RTR_FLAG)
431 msg_flag_n |= SUN4I_MSG_RTR_FLAG;
433 if (id & CAN_EFF_FLAG) {
434 msg_flag_n |= SUN4I_MSG_EFF_FLAG;
435 dreg = SUN4I_REG_BUF5_ADDR;
436 writel((id >> 21) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR);
437 writel((id >> 13) & 0xFF, priv->base + SUN4I_REG_BUF2_ADDR);
438 writel((id >> 5) & 0xFF, priv->base + SUN4I_REG_BUF3_ADDR);
439 writel((id << 3) & 0xF8, priv->base + SUN4I_REG_BUF4_ADDR);
440 } else {
441 dreg = SUN4I_REG_BUF3_ADDR;
442 writel((id >> 3) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR);
443 writel((id << 5) & 0xE0, priv->base + SUN4I_REG_BUF2_ADDR);
446 for (i = 0; i < dlc; i++)
447 writel(cf->data[i], priv->base + (dreg + i * 4));
449 writel(msg_flag_n, priv->base + SUN4I_REG_BUF0_ADDR);
451 can_put_echo_skb(skb, dev, 0);
453 if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
454 sun4i_can_write_cmdreg(priv, SUN4I_CMD_SELF_RCV_REQ);
455 else
456 sun4i_can_write_cmdreg(priv, SUN4I_CMD_TRANS_REQ);
458 return NETDEV_TX_OK;
461 static void sun4i_can_rx(struct net_device *dev)
463 struct sun4ican_priv *priv = netdev_priv(dev);
464 struct net_device_stats *stats = &dev->stats;
465 struct can_frame *cf;
466 struct sk_buff *skb;
467 u8 fi;
468 u32 dreg;
469 canid_t id;
470 int i;
472 /* create zero'ed CAN frame buffer */
473 skb = alloc_can_skb(dev, &cf);
474 if (!skb)
475 return;
477 fi = readl(priv->base + SUN4I_REG_BUF0_ADDR);
478 cf->can_dlc = get_can_dlc(fi & 0x0F);
479 if (fi & SUN4I_MSG_EFF_FLAG) {
480 dreg = SUN4I_REG_BUF5_ADDR;
481 id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 21) |
482 (readl(priv->base + SUN4I_REG_BUF2_ADDR) << 13) |
483 (readl(priv->base + SUN4I_REG_BUF3_ADDR) << 5) |
484 ((readl(priv->base + SUN4I_REG_BUF4_ADDR) >> 3) & 0x1f);
485 id |= CAN_EFF_FLAG;
486 } else {
487 dreg = SUN4I_REG_BUF3_ADDR;
488 id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 3) |
489 ((readl(priv->base + SUN4I_REG_BUF2_ADDR) >> 5) & 0x7);
492 /* remote frame ? */
493 if (fi & SUN4I_MSG_RTR_FLAG)
494 id |= CAN_RTR_FLAG;
495 else
496 for (i = 0; i < cf->can_dlc; i++)
497 cf->data[i] = readl(priv->base + dreg + i * 4);
499 cf->can_id = id;
501 sun4i_can_write_cmdreg(priv, SUN4I_CMD_RELEASE_RBUF);
503 stats->rx_packets++;
504 stats->rx_bytes += cf->can_dlc;
505 netif_rx(skb);
507 can_led_event(dev, CAN_LED_EVENT_RX);
510 static int sun4i_can_err(struct net_device *dev, u8 isrc, u8 status)
512 struct sun4ican_priv *priv = netdev_priv(dev);
513 struct net_device_stats *stats = &dev->stats;
514 struct can_frame *cf;
515 struct sk_buff *skb;
516 enum can_state state = priv->can.state;
517 enum can_state rx_state, tx_state;
518 unsigned int rxerr, txerr, errc;
519 u32 ecc, alc;
521 /* we don't skip if alloc fails because we want the stats anyhow */
522 skb = alloc_can_err_skb(dev, &cf);
524 errc = readl(priv->base + SUN4I_REG_ERRC_ADDR);
525 rxerr = (errc >> 16) & 0xFF;
526 txerr = errc & 0xFF;
528 if (skb) {
529 cf->data[6] = txerr;
530 cf->data[7] = rxerr;
533 if (isrc & SUN4I_INT_DATA_OR) {
534 /* data overrun interrupt */
535 netdev_dbg(dev, "data overrun interrupt\n");
536 if (likely(skb)) {
537 cf->can_id |= CAN_ERR_CRTL;
538 cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
540 stats->rx_over_errors++;
541 stats->rx_errors++;
543 /* reset the CAN IP by entering reset mode
544 * ignoring timeout error
546 set_reset_mode(dev);
547 set_normal_mode(dev);
549 /* clear bit */
550 sun4i_can_write_cmdreg(priv, SUN4I_CMD_CLEAR_OR_FLAG);
552 if (isrc & SUN4I_INT_ERR_WRN) {
553 /* error warning interrupt */
554 netdev_dbg(dev, "error warning interrupt\n");
556 if (status & SUN4I_STA_BUS_OFF)
557 state = CAN_STATE_BUS_OFF;
558 else if (status & SUN4I_STA_ERR_STA)
559 state = CAN_STATE_ERROR_WARNING;
560 else
561 state = CAN_STATE_ERROR_ACTIVE;
563 if (isrc & SUN4I_INT_BUS_ERR) {
564 /* bus error interrupt */
565 netdev_dbg(dev, "bus error interrupt\n");
566 priv->can.can_stats.bus_error++;
567 stats->rx_errors++;
569 if (likely(skb)) {
570 ecc = readl(priv->base + SUN4I_REG_STA_ADDR);
572 cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
574 switch (ecc & SUN4I_STA_MASK_ERR) {
575 case SUN4I_STA_BIT_ERR:
576 cf->data[2] |= CAN_ERR_PROT_BIT;
577 break;
578 case SUN4I_STA_FORM_ERR:
579 cf->data[2] |= CAN_ERR_PROT_FORM;
580 break;
581 case SUN4I_STA_STUFF_ERR:
582 cf->data[2] |= CAN_ERR_PROT_STUFF;
583 break;
584 default:
585 cf->data[3] = (ecc & SUN4I_STA_ERR_SEG_CODE)
586 >> 16;
587 break;
589 /* error occurred during transmission? */
590 if ((ecc & SUN4I_STA_ERR_DIR) == 0)
591 cf->data[2] |= CAN_ERR_PROT_TX;
594 if (isrc & SUN4I_INT_ERR_PASSIVE) {
595 /* error passive interrupt */
596 netdev_dbg(dev, "error passive interrupt\n");
597 if (state == CAN_STATE_ERROR_PASSIVE)
598 state = CAN_STATE_ERROR_WARNING;
599 else
600 state = CAN_STATE_ERROR_PASSIVE;
602 if (isrc & SUN4I_INT_ARB_LOST) {
603 /* arbitration lost interrupt */
604 netdev_dbg(dev, "arbitration lost interrupt\n");
605 alc = readl(priv->base + SUN4I_REG_STA_ADDR);
606 priv->can.can_stats.arbitration_lost++;
607 stats->tx_errors++;
608 if (likely(skb)) {
609 cf->can_id |= CAN_ERR_LOSTARB;
610 cf->data[0] = (alc >> 8) & 0x1f;
614 if (state != priv->can.state) {
615 tx_state = txerr >= rxerr ? state : 0;
616 rx_state = txerr <= rxerr ? state : 0;
618 if (likely(skb))
619 can_change_state(dev, cf, tx_state, rx_state);
620 else
621 priv->can.state = state;
622 if (state == CAN_STATE_BUS_OFF)
623 can_bus_off(dev);
626 if (likely(skb)) {
627 stats->rx_packets++;
628 stats->rx_bytes += cf->can_dlc;
629 netif_rx(skb);
630 } else {
631 return -ENOMEM;
634 return 0;
637 static irqreturn_t sun4i_can_interrupt(int irq, void *dev_id)
639 struct net_device *dev = (struct net_device *)dev_id;
640 struct sun4ican_priv *priv = netdev_priv(dev);
641 struct net_device_stats *stats = &dev->stats;
642 u8 isrc, status;
643 int n = 0;
645 while ((isrc = readl(priv->base + SUN4I_REG_INT_ADDR)) &&
646 (n < SUN4I_CAN_MAX_IRQ)) {
647 n++;
648 status = readl(priv->base + SUN4I_REG_STA_ADDR);
650 if (isrc & SUN4I_INT_WAKEUP)
651 netdev_warn(dev, "wakeup interrupt\n");
653 if (isrc & SUN4I_INT_TBUF_VLD) {
654 /* transmission complete interrupt */
655 stats->tx_bytes +=
656 readl(priv->base +
657 SUN4I_REG_RBUF_RBACK_START_ADDR) & 0xf;
658 stats->tx_packets++;
659 can_get_echo_skb(dev, 0);
660 netif_wake_queue(dev);
661 can_led_event(dev, CAN_LED_EVENT_TX);
663 if ((isrc & SUN4I_INT_RBUF_VLD) &&
664 !(isrc & SUN4I_INT_DATA_OR)) {
665 /* receive interrupt - don't read if overrun occurred */
666 while (status & SUN4I_STA_RBUF_RDY) {
667 /* RX buffer is not empty */
668 sun4i_can_rx(dev);
669 status = readl(priv->base + SUN4I_REG_STA_ADDR);
672 if (isrc &
673 (SUN4I_INT_DATA_OR | SUN4I_INT_ERR_WRN | SUN4I_INT_BUS_ERR |
674 SUN4I_INT_ERR_PASSIVE | SUN4I_INT_ARB_LOST)) {
675 /* error interrupt */
676 if (sun4i_can_err(dev, isrc, status))
677 netdev_err(dev, "can't allocate buffer - clearing pending interrupts\n");
679 /* clear interrupts */
680 writel(isrc, priv->base + SUN4I_REG_INT_ADDR);
681 readl(priv->base + SUN4I_REG_INT_ADDR);
683 if (n >= SUN4I_CAN_MAX_IRQ)
684 netdev_dbg(dev, "%d messages handled in ISR", n);
686 return (n) ? IRQ_HANDLED : IRQ_NONE;
689 static int sun4ican_open(struct net_device *dev)
691 struct sun4ican_priv *priv = netdev_priv(dev);
692 int err;
694 /* common open */
695 err = open_candev(dev);
696 if (err)
697 return err;
699 /* register interrupt handler */
700 err = request_irq(dev->irq, sun4i_can_interrupt, 0, dev->name, dev);
701 if (err) {
702 netdev_err(dev, "request_irq err: %d\n", err);
703 goto exit_irq;
706 /* turn on clocking for CAN peripheral block */
707 err = clk_prepare_enable(priv->clk);
708 if (err) {
709 netdev_err(dev, "could not enable CAN peripheral clock\n");
710 goto exit_clock;
713 err = sun4i_can_start(dev);
714 if (err) {
715 netdev_err(dev, "could not start CAN peripheral\n");
716 goto exit_can_start;
719 can_led_event(dev, CAN_LED_EVENT_OPEN);
720 netif_start_queue(dev);
722 return 0;
724 exit_can_start:
725 clk_disable_unprepare(priv->clk);
726 exit_clock:
727 free_irq(dev->irq, dev);
728 exit_irq:
729 close_candev(dev);
730 return err;
733 static int sun4ican_close(struct net_device *dev)
735 struct sun4ican_priv *priv = netdev_priv(dev);
737 netif_stop_queue(dev);
738 sun4i_can_stop(dev);
739 clk_disable_unprepare(priv->clk);
741 free_irq(dev->irq, dev);
742 close_candev(dev);
743 can_led_event(dev, CAN_LED_EVENT_STOP);
745 return 0;
748 static const struct net_device_ops sun4ican_netdev_ops = {
749 .ndo_open = sun4ican_open,
750 .ndo_stop = sun4ican_close,
751 .ndo_start_xmit = sun4ican_start_xmit,
754 static const struct of_device_id sun4ican_of_match[] = {
755 {.compatible = "allwinner,sun4i-a10-can"},
759 MODULE_DEVICE_TABLE(of, sun4ican_of_match);
761 static int sun4ican_remove(struct platform_device *pdev)
763 struct net_device *dev = platform_get_drvdata(pdev);
765 unregister_netdev(dev);
766 free_candev(dev);
768 return 0;
771 static int sun4ican_probe(struct platform_device *pdev)
773 struct device_node *np = pdev->dev.of_node;
774 struct resource *mem;
775 struct clk *clk;
776 void __iomem *addr;
777 int err, irq;
778 struct net_device *dev;
779 struct sun4ican_priv *priv;
781 clk = of_clk_get(np, 0);
782 if (IS_ERR(clk)) {
783 dev_err(&pdev->dev, "unable to request clock\n");
784 err = -ENODEV;
785 goto exit;
788 irq = platform_get_irq(pdev, 0);
789 if (irq < 0) {
790 dev_err(&pdev->dev, "could not get a valid irq\n");
791 err = -ENODEV;
792 goto exit;
795 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
796 addr = devm_ioremap_resource(&pdev->dev, mem);
797 if (IS_ERR(addr)) {
798 err = -EBUSY;
799 goto exit;
802 dev = alloc_candev(sizeof(struct sun4ican_priv), 1);
803 if (!dev) {
804 dev_err(&pdev->dev,
805 "could not allocate memory for CAN device\n");
806 err = -ENOMEM;
807 goto exit;
810 dev->netdev_ops = &sun4ican_netdev_ops;
811 dev->irq = irq;
812 dev->flags |= IFF_ECHO;
814 priv = netdev_priv(dev);
815 priv->can.clock.freq = clk_get_rate(clk);
816 priv->can.bittiming_const = &sun4ican_bittiming_const;
817 priv->can.do_set_mode = sun4ican_set_mode;
818 priv->can.do_get_berr_counter = sun4ican_get_berr_counter;
819 priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING |
820 CAN_CTRLMODE_LISTENONLY |
821 CAN_CTRLMODE_LOOPBACK |
822 CAN_CTRLMODE_3_SAMPLES;
823 priv->base = addr;
824 priv->clk = clk;
825 spin_lock_init(&priv->cmdreg_lock);
827 platform_set_drvdata(pdev, dev);
828 SET_NETDEV_DEV(dev, &pdev->dev);
830 err = register_candev(dev);
831 if (err) {
832 dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
833 DRV_NAME, err);
834 goto exit_free;
836 devm_can_led_init(dev);
838 dev_info(&pdev->dev, "device registered (base=%p, irq=%d)\n",
839 priv->base, dev->irq);
841 return 0;
843 exit_free:
844 free_candev(dev);
845 exit:
846 return err;
849 static struct platform_driver sun4i_can_driver = {
850 .driver = {
851 .name = DRV_NAME,
852 .of_match_table = sun4ican_of_match,
854 .probe = sun4ican_probe,
855 .remove = sun4ican_remove,
858 module_platform_driver(sun4i_can_driver);
860 MODULE_AUTHOR("Peter Chen <xingkongcp@gmail.com>");
861 MODULE_AUTHOR("Gerhard Bertelsmann <info@gerhard-bertelsmann.de>");
862 MODULE_LICENSE("Dual BSD/GPL");
863 MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20)");